diabolik@NUC-Ubuntu:~$ cd RetroPie-Setup
diabolik@NUC-Ubuntu:~/RetroPie-Setup$ sudo ./retropie_packages.sh sdl2

= = = = = = = = = = = = = = = = = = = = =
Installing dependencies for 'sdl2' : SDL (Simple DirectMedia Layer) v2.x
= = = = = = = = = = = = = = = = = = = = =

Did not find needed dependencies: fcitx-libs-dev libegl1-mesa-dev libgles2-mesa-dev devscripts debhelper dh-autoreconf. Trying to install them now.
Trovato:1 http://archive.ubuntu.com/ubuntu noble InRelease
Scaricamento di:2 http://security.ubuntu.com/ubuntu noble-security InRelease [126 kB]
Scaricamento di:3 http://archive.ubuntu.com/ubuntu noble-updates InRelease [126 kB]
Scaricamento di:4 http://archive.ubuntu.com/ubuntu noble-backports InRelease [126 kB]
Scaricamento di:5 http://security.ubuntu.com/ubuntu noble-security/main amd64 Components [7.212 B]
Scaricamento di:6 http://security.ubuntu.com/ubuntu noble-security/restricted amd64 Components [208 B]
Scaricamento di:7 http://security.ubuntu.com/ubuntu noble-security/universe amd64 Components [51,9 kB]
Scaricamento di:8 http://security.ubuntu.com/ubuntu noble-security/multiverse amd64 Components [208 B]
Scaricamento di:9 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 Components [114 kB]
Scaricamento di:10 https://esm.ubuntu.com/apps/ubuntu noble-apps-security InRelease [7.532 B]
Scaricamento di:11 http://archive.ubuntu.com/ubuntu noble-updates/restricted amd64 Components [212 B]
Scaricamento di:12 http://archive.ubuntu.com/ubuntu noble-updates/universe amd64 Components [306 kB]
Scaricamento di:13 https://esm.ubuntu.com/apps/ubuntu noble-apps-updates InRelease [7.468 B]
Scaricamento di:14 http://archive.ubuntu.com/ubuntu noble-updates/multiverse amd64 Components [940 B]
Scaricamento di:15 http://archive.ubuntu.com/ubuntu noble-backports/main amd64 Components [208 B]
Scaricamento di:16 http://archive.ubuntu.com/ubuntu noble-backports/restricted amd64 Components [216 B]
Scaricamento di:17 http://archive.ubuntu.com/ubuntu noble-backports/universe amd64 Components [21,2 kB]
Scaricamento di:18 http://archive.ubuntu.com/ubuntu noble-backports/multiverse amd64 Components [212 B]
Scaricamento di:19 https://esm.ubuntu.com/infra/ubuntu noble-infra-security InRelease [7.462 B]
Scaricamento di:20 https://esm.ubuntu.com/infra/ubuntu noble-infra-updates InRelease [7.461 B]
Recuperati 910 kB in 1s (867 kB/s)
Lettura elenco dei pacchetti... Fatto
Lettura elenco dei pacchetti... Fatto
Generazione albero delle dipendenze... Fatto
Lettura informazioni sullo stato... Fatto
I seguenti pacchetti aggiuntivi saranno inoltre installati:
  autoconf automake autopoint autotools-dev debugedit dh-strip-nondeterminism dwz fcitx-bin gir1.2-fcitx-1.0 libdebhelper-perl libfcitx-config4 libfcitx-core0 libfcitx-gclient1
  libfcitx-utils0 libfile-dirlist-perl libfile-homedir-perl libfile-stripnondeterminism-perl libfile-touch-perl libfile-which-perl libgettextpo0 libio-pty-perl libipc-run-perl
  libsub-override-perl libtool po-debconf wdiff
Pacchetti suggeriti:
  autoconf-archive gnu-standards autoconf-doc dh-make adequate at autopkgtest bls-standalone bsd-mailx | mailx check-all-the-things cvs-buildpackage diffoscope disorderfs dose-extra
  duck elpa-devscripts faketime gnuplot how-can-i-help libdbd-pg-perl libterm-size-perl libyaml-syck-perl mmdebstrap mutt piuparts postgresql-client pristine-lfs quilt ratt reprotest
  svn-buildpackage w3m debian-keyring equivs libgitlab-api-v4-perl libsoap-lite-perl pristine-tar fcitx libtool-doc gfortran | fortran95-compiler gcj-jdk libmail-box-perl wdiff-doc
Pacchetti raccomandati:
  dctrl-tools dput | dupload libdistro-info-perl libgit-wrapper-perl libjson-perl libstring-shellquote-perl licensecheck python3-magic python3-unidiff fcitx-data fcitx-modules
  libarchive-cpio-perl libltdl-dev libmail-sendmail-perl
I seguenti pacchetti NUOVI saranno installati:
  autoconf automake autopoint autotools-dev debhelper debugedit devscripts dh-autoreconf dh-strip-nondeterminism dwz fcitx-bin fcitx-libs-dev gir1.2-fcitx-1.0 libdebhelper-perl
  libegl1-mesa-dev libfcitx-config4 libfcitx-core0 libfcitx-gclient1 libfcitx-utils0 libfile-dirlist-perl libfile-homedir-perl libfile-stripnondeterminism-perl libfile-touch-perl
  libfile-which-perl libgettextpo0 libgles2-mesa-dev libio-pty-perl libipc-run-perl libsub-override-perl libtool po-debconf wdiff
0 aggiornati, 32 installati, 0 da rimuovere e 3 non aggiornati.
È necessario scaricare 4.718 kB di archivi.
Dopo quest'operazione, verranno occupati 13,8 MB di spazio su disco.
Scaricamento di:1 http://archive.ubuntu.com/ubuntu noble/main amd64 autoconf all 2.71-3 [339 kB]
Scaricamento di:2 http://archive.ubuntu.com/ubuntu noble/main amd64 autotools-dev all 20220109.1 [44,9 kB]
Scaricamento di:3 http://archive.ubuntu.com/ubuntu noble/main amd64 automake all 1:1.16.5-1.3ubuntu1 [558 kB]
Scaricamento di:4 http://archive.ubuntu.com/ubuntu noble/main amd64 autopoint all 0.21-14ubuntu2 [422 kB]
Scaricamento di:5 http://archive.ubuntu.com/ubuntu noble/main amd64 libdebhelper-perl all 13.14.1ubuntu5 [89,8 kB]
Scaricamento di:6 http://archive.ubuntu.com/ubuntu noble/main amd64 libtool all 2.4.7-7build1 [166 kB]
Scaricamento di:7 http://archive.ubuntu.com/ubuntu noble/main amd64 dh-autoreconf all 20 [16,1 kB]
Scaricamento di:8 http://archive.ubuntu.com/ubuntu noble/main amd64 libsub-override-perl all 0.10-1 [10,0 kB]
Scaricamento di:9 http://archive.ubuntu.com/ubuntu noble/main amd64 libfile-stripnondeterminism-perl all 1.13.1-1 [18,1 kB]
Scaricamento di:10 http://archive.ubuntu.com/ubuntu noble/main amd64 dh-strip-nondeterminism all 1.13.1-1 [5.362 B]
Scaricamento di:11 http://archive.ubuntu.com/ubuntu noble/main amd64 debugedit amd64 1:5.0-5build2 [46,1 kB]
Scaricamento di:12 http://archive.ubuntu.com/ubuntu noble/main amd64 dwz amd64 0.15-1build6 [115 kB]
Scaricamento di:13 http://archive.ubuntu.com/ubuntu noble/main amd64 po-debconf all 1.0.21+nmu1 [233 kB]
Scaricamento di:14 http://archive.ubuntu.com/ubuntu noble/main amd64 debhelper all 13.14.1ubuntu5 [869 kB]
Scaricamento di:15 http://archive.ubuntu.com/ubuntu noble/main amd64 libfile-dirlist-perl all 0.05-3 [7.286 B]
Scaricamento di:16 http://archive.ubuntu.com/ubuntu noble/main amd64 libfile-which-perl all 1.27-2 [12,5 kB]
Scaricamento di:17 http://archive.ubuntu.com/ubuntu noble/main amd64 libfile-homedir-perl all 1.006-2 [37,0 kB]
Scaricamento di:18 http://archive.ubuntu.com/ubuntu noble/main amd64 libfile-touch-perl all 0.12-2 [7.498 B]
Scaricamento di:19 http://archive.ubuntu.com/ubuntu noble/main amd64 libio-pty-perl amd64 1:1.20-1build2 [31,2 kB]
Scaricamento di:20 http://archive.ubuntu.com/ubuntu noble/main amd64 libipc-run-perl all 20231003.0-1 [92,1 kB]
Scaricamento di:21 http://archive.ubuntu.com/ubuntu noble/main amd64 wdiff amd64 1.2.2-6build1 [29,1 kB]
Scaricamento di:22 http://archive.ubuntu.com/ubuntu noble/main amd64 devscripts all 2.23.7 [1.069 kB]
Scaricamento di:23 http://archive.ubuntu.com/ubuntu noble/universe amd64 libfcitx-utils0 amd64 1:4.2.9.9-2build2 [37,7 kB]
Scaricamento di:24 http://archive.ubuntu.com/ubuntu noble/universe amd64 libfcitx-config4 amd64 1:4.2.9.9-2build2 [36,8 kB]
Scaricamento di:25 http://archive.ubuntu.com/ubuntu noble/universe amd64 libfcitx-core0 amd64 1:4.2.9.9-2build2 [58,2 kB]
Scaricamento di:26 http://archive.ubuntu.com/ubuntu noble/main amd64 libgettextpo0 amd64 0.21-14ubuntu2 [143 kB]
Scaricamento di:27 http://archive.ubuntu.com/ubuntu noble/universe amd64 fcitx-bin amd64 1:4.2.9.9-2build2 [44,5 kB]
Scaricamento di:28 http://archive.ubuntu.com/ubuntu noble/universe amd64 libfcitx-gclient1 amd64 1:4.2.9.9-2build2 [21,1 kB]
Scaricamento di:29 http://archive.ubuntu.com/ubuntu noble/universe amd64 gir1.2-fcitx-1.0 amd64 1:4.2.9.9-2build2 [6.630 B]
Scaricamento di:30 http://archive.ubuntu.com/ubuntu noble/universe amd64 fcitx-libs-dev amd64 1:4.2.9.9-2build2 [112 kB]
Scaricamento di:31 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 libegl1-mesa-dev amd64 24.0.9-0ubuntu0.2 [21,9 kB]
Scaricamento di:32 http://archive.ubuntu.com/ubuntu noble-updates/main amd64 libgles2-mesa-dev amd64 24.0.9-0ubuntu0.2 [17,3 kB]
Recuperati 4.718 kB in 1s (6.405 kB/s)
Estrazione dei template dai pacchetti: 100%
Selezionato il pacchetto autoconf non precedentemente selezionato.
(Lettura del database... 253326 file e directory attualmente installati.)
Preparativi per estrarre .../00-autoconf_2.71-3_all.deb...
Estrazione di autoconf (2.71-3)...
Selezionato il pacchetto autotools-dev non precedentemente selezionato.
Preparativi per estrarre .../01-autotools-dev_20220109.1_all.deb...
Estrazione di autotools-dev (20220109.1)...
Selezionato il pacchetto automake non precedentemente selezionato.
Preparativi per estrarre .../02-automake_1%3a1.16.5-1.3ubuntu1_all.deb...
Estrazione di automake (1:1.16.5-1.3ubuntu1)...
Selezionato il pacchetto autopoint non precedentemente selezionato.
Preparativi per estrarre .../03-autopoint_0.21-14ubuntu2_all.deb...
Estrazione di autopoint (0.21-14ubuntu2)...
Selezionato il pacchetto libdebhelper-perl non precedentemente selezionato.
Preparativi per estrarre .../04-libdebhelper-perl_13.14.1ubuntu5_all.deb...
Estrazione di libdebhelper-perl (13.14.1ubuntu5)...
Selezionato il pacchetto libtool non precedentemente selezionato.
Preparativi per estrarre .../05-libtool_2.4.7-7build1_all.deb...
Estrazione di libtool (2.4.7-7build1)...
Selezionato il pacchetto dh-autoreconf non precedentemente selezionato.
Preparativi per estrarre .../06-dh-autoreconf_20_all.deb...
Estrazione di dh-autoreconf (20)...
Selezionato il pacchetto libsub-override-perl non precedentemente selezionato.
Preparativi per estrarre .../07-libsub-override-perl_0.10-1_all.deb...
Estrazione di libsub-override-perl (0.10-1)...
Selezionato il pacchetto libfile-stripnondeterminism-perl non precedentemente selezionato.
Preparativi per estrarre .../08-libfile-stripnondeterminism-perl_1.13.1-1_all.deb...
Estrazione di libfile-stripnondeterminism-perl (1.13.1-1)...
Selezionato il pacchetto dh-strip-nondeterminism non precedentemente selezionato.
Preparativi per estrarre .../09-dh-strip-nondeterminism_1.13.1-1_all.deb...
Estrazione di dh-strip-nondeterminism (1.13.1-1)...
Selezionato il pacchetto debugedit non precedentemente selezionato.
Preparativi per estrarre .../10-debugedit_1%3a5.0-5build2_amd64.deb...
Estrazione di debugedit (1:5.0-5build2)...
Selezionato il pacchetto dwz non precedentemente selezionato.
Preparativi per estrarre .../11-dwz_0.15-1build6_amd64.deb...
Estrazione di dwz (0.15-1build6)...
Selezionato il pacchetto po-debconf non precedentemente selezionato.
Preparativi per estrarre .../12-po-debconf_1.0.21+nmu1_all.deb...
Estrazione di po-debconf (1.0.21+nmu1)...
Selezionato il pacchetto debhelper non precedentemente selezionato.
Preparativi per estrarre .../13-debhelper_13.14.1ubuntu5_all.deb...
Estrazione di debhelper (13.14.1ubuntu5)...
Selezionato il pacchetto libfile-dirlist-perl non precedentemente selezionato.
Preparativi per estrarre .../14-libfile-dirlist-perl_0.05-3_all.deb...
Estrazione di libfile-dirlist-perl (0.05-3)...
Selezionato il pacchetto libfile-which-perl non precedentemente selezionato.
Preparativi per estrarre .../15-libfile-which-perl_1.27-2_all.deb...
Estrazione di libfile-which-perl (1.27-2)...
Selezionato il pacchetto libfile-homedir-perl non precedentemente selezionato.
Preparativi per estrarre .../16-libfile-homedir-perl_1.006-2_all.deb...
Estrazione di libfile-homedir-perl (1.006-2)...
Selezionato il pacchetto libfile-touch-perl non precedentemente selezionato.
Preparativi per estrarre .../17-libfile-touch-perl_0.12-2_all.deb...
Estrazione di libfile-touch-perl (0.12-2)...
Selezionato il pacchetto libio-pty-perl non precedentemente selezionato.
Preparativi per estrarre .../18-libio-pty-perl_1%3a1.20-1build2_amd64.deb...
Estrazione di libio-pty-perl (1:1.20-1build2)...
Selezionato il pacchetto libipc-run-perl non precedentemente selezionato.
Preparativi per estrarre .../19-libipc-run-perl_20231003.0-1_all.deb...
Estrazione di libipc-run-perl (20231003.0-1)...
Selezionato il pacchetto wdiff non precedentemente selezionato.
Preparativi per estrarre .../20-wdiff_1.2.2-6build1_amd64.deb...
Estrazione di wdiff (1.2.2-6build1)...
Selezionato il pacchetto devscripts non precedentemente selezionato.
Preparativi per estrarre .../21-devscripts_2.23.7_all.deb...
Estrazione di devscripts (2.23.7)...
Selezionato il pacchetto libfcitx-utils0:amd64 non precedentemente selezionato.
Preparativi per estrarre .../22-libfcitx-utils0_1%3a4.2.9.9-2build2_amd64.deb...
Estrazione di libfcitx-utils0:amd64 (1:4.2.9.9-2build2)...
Selezionato il pacchetto libfcitx-config4:amd64 non precedentemente selezionato.
Preparativi per estrarre .../23-libfcitx-config4_1%3a4.2.9.9-2build2_amd64.deb...
Estrazione di libfcitx-config4:amd64 (1:4.2.9.9-2build2)...
Selezionato il pacchetto libfcitx-core0:amd64 non precedentemente selezionato.
Preparativi per estrarre .../24-libfcitx-core0_1%3a4.2.9.9-2build2_amd64.deb...
Estrazione di libfcitx-core0:amd64 (1:4.2.9.9-2build2)...
Selezionato il pacchetto libgettextpo0:amd64 non precedentemente selezionato.
Preparativi per estrarre .../25-libgettextpo0_0.21-14ubuntu2_amd64.deb...
Estrazione di libgettextpo0:amd64 (0.21-14ubuntu2)...
Selezionato il pacchetto fcitx-bin non precedentemente selezionato.
Preparativi per estrarre .../26-fcitx-bin_1%3a4.2.9.9-2build2_amd64.deb...
Estrazione di fcitx-bin (1:4.2.9.9-2build2)...
Selezionato il pacchetto libfcitx-gclient1:amd64 non precedentemente selezionato.
Preparativi per estrarre .../27-libfcitx-gclient1_1%3a4.2.9.9-2build2_amd64.deb...
Estrazione di libfcitx-gclient1:amd64 (1:4.2.9.9-2build2)...
Selezionato il pacchetto gir1.2-fcitx-1.0 non precedentemente selezionato.
Preparativi per estrarre .../28-gir1.2-fcitx-1.0_1%3a4.2.9.9-2build2_amd64.deb...
Estrazione di gir1.2-fcitx-1.0 (1:4.2.9.9-2build2)...
Selezionato il pacchetto fcitx-libs-dev non precedentemente selezionato.
Preparativi per estrarre .../29-fcitx-libs-dev_1%3a4.2.9.9-2build2_amd64.deb...
Estrazione di fcitx-libs-dev (1:4.2.9.9-2build2)...
Selezionato il pacchetto libegl1-mesa-dev:amd64 non precedentemente selezionato.
Preparativi per estrarre .../30-libegl1-mesa-dev_24.0.9-0ubuntu0.2_amd64.deb...
Estrazione di libegl1-mesa-dev:amd64 (24.0.9-0ubuntu0.2)...
Selezionato il pacchetto libgles2-mesa-dev:amd64 non precedentemente selezionato.
Preparativi per estrarre .../31-libgles2-mesa-dev_24.0.9-0ubuntu0.2_amd64.deb...
Estrazione di libgles2-mesa-dev:amd64 (24.0.9-0ubuntu0.2)...
Configurazione di wdiff (1.2.2-6build1)...
Configurazione di libfile-which-perl (1.27-2)...
Configurazione di libgles2-mesa-dev:amd64 (24.0.9-0ubuntu0.2)...
Configurazione di libio-pty-perl (1:1.20-1build2)...
Configurazione di po-debconf (1.0.21+nmu1)...
Configurazione di libdebhelper-perl (13.14.1ubuntu5)...
Configurazione di libfcitx-utils0:amd64 (1:4.2.9.9-2build2)...
Configurazione di libgettextpo0:amd64 (0.21-14ubuntu2)...
Configurazione di libfcitx-gclient1:amd64 (1:4.2.9.9-2build2)...
Configurazione di autotools-dev (20220109.1)...
Configurazione di autopoint (0.21-14ubuntu2)...
Configurazione di libipc-run-perl (20231003.0-1)...
Configurazione di autoconf (2.71-3)...
Configurazione di dwz (0.15-1build6)...
Configurazione di debugedit (1:5.0-5build2)...
Configurazione di libsub-override-perl (0.10-1)...
Configurazione di libfcitx-config4:amd64 (1:4.2.9.9-2build2)...
Configurazione di libfile-dirlist-perl (0.05-3)...
Configurazione di libfile-homedir-perl (1.006-2)...
Configurazione di libfile-touch-perl (0.12-2)...
Configurazione di libegl1-mesa-dev:amd64 (24.0.9-0ubuntu0.2)...
Configurazione di automake (1:1.16.5-1.3ubuntu1)...
update-alternatives: viene usato /usr/bin/automake-1.16 per fornire /usr/bin/automake (automake) in modalità automatica
Configurazione di libfile-stripnondeterminism-perl (1.13.1-1)...
Configurazione di libtool (2.4.7-7build1)...
Configurazione di gir1.2-fcitx-1.0 (1:4.2.9.9-2build2)...
Configurazione di dh-autoreconf (20)...
Configurazione di devscripts (2.23.7)...
Configurazione di libfcitx-core0:amd64 (1:4.2.9.9-2build2)...
Configurazione di fcitx-bin (1:4.2.9.9-2build2)...
Configurazione di dh-strip-nondeterminism (1.13.1-1)...
Configurazione di fcitx-libs-dev (1:4.2.9.9-2build2)...
Configurazione di debhelper (13.14.1ubuntu5)...
Elaborazione dei trigger per install-info (7.1-3build2)...
Elaborazione dei trigger per libc-bin (2.39-0ubuntu8.3)...
Elaborazione dei trigger per man-db (2.12.0-4build2)...
/home/diabolik/RetroPie-Setup/tmp/build/sdl2 /home/diabolik/RetroPie-Setup

= = = = = = = = = = = = = = = = = = = = =
Getting sources for 'sdl2' : SDL (Simple DirectMedia Layer) v2.x
= = = = = = = = = = = = = = = = = = = = =

git clone --recursive --depth 1 --shallow-submodules --branch retropie-2.30.8 "https://github.com/RetroPie/SDL.git" "/home/diabolik/RetroPie-Setup/tmp/build/sdl2/2.30.8+1"
Clone in '/home/diabolik/RetroPie-Setup/tmp/build/sdl2/2.30.8+1' in corso...
remote: Enumerating objects: 2142, done.
remote: Counting objects: 100% (2142/2142), done.
remote: Compressing objects: 100% (1436/1436), done.
remote: Total 2142 (delta 621), reused 1321 (delta 535), pack-reused 0 (from 0)
Ricezione degli oggetti: 100% (2142/2142), 7.66 MiB | 11.51 MiB/s, fatto.
Risoluzione dei delta: 100% (621/621), fatto.
HEAD is now in branch 'retropie-2.30.8' at commit 'a2e92114ae1e6a03b620727dc43d27b8ad83f4ae'
/home/diabolik/RetroPie-Setup
/home/diabolik/RetroPie-Setup/tmp/build/sdl2 /home/diabolik/RetroPie-Setup

= = = = = = = = = = = = = = = = = = = = =
Building 'sdl2' : SDL (Simple DirectMedia Layer) v2.x
= = = = = = = = = = = = = = = = = = = = =

dpkg-buildpackage: Informazioni: Pacchetto sorgente libsdl2
dpkg-buildpackage: Informazioni: Versione sorgente 2.30.8+1
dpkg-buildpackage: Informazioni: Distribuzione sorgente UNRELEASED
dpkg-buildpackage: Informazioni: Sorgente modificata da Jools Wills <[email protected]>
dpkg-buildpackage: Informazioni: Architettura host amd64
 dpkg-source --before-build .
 debian/rules clean
dh clean --parallel --without autoreconf
   debian/rules override_dh_auto_clean
make[1]: ingresso nella directory «/home/diabolik/RetroPie-Setup/tmp/build/sdl2/2.30.8+1»
dh_auto_clean -Bbuilddir/all
rm -f debian/examples.tar.gz
make[1]: uscita dalla directory «/home/diabolik/RetroPie-Setup/tmp/build/sdl2/2.30.8+1»
   dh_clean
 debian/rules build
dh build --parallel --without autoreconf
   dh_update_autotools_config
cp: warning: behavior of -n is non-portable and may change in future; use --update=none instead
cp: warning: behavior of -n is non-portable and may change in future; use --update=none instead
   debian/rules override_dh_auto_configure
make[1]: ingresso nella directory «/home/diabolik/RetroPie-Setup/tmp/build/sdl2/2.30.8+1»
dh_auto_configure -Bbuilddir/all -- --enable-video-vulkan --disable-rpath --disable-video-directfb --disable-nas --disable-esd --disable-arts
	cd builddir/all && ../../configure --build=x86_64-linux-gnu --prefix=/usr --includedir=\${prefix}/include --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --disable-option-checking --disable-silent-rules --libdir=\${prefix}/lib/x86_64-linux-gnu --libexecdir=\${prefix}/lib/x86_64-linux-gnu --disable-maintainer-mode --disable-dependency-tracking --enable-video-vulkan --disable-rpath --disable-video-directfb --disable-nas --disable-esd --disable-arts
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking how to print strings... printf
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether the compiler supports GNU C... yes
checking whether gcc accepts -g... yes
checking for gcc option to enable C11 features... none needed
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... /usr/bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking for gawk... no
checking for mawk... mawk
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for mt... mt
checking if mt is a manifest tool... no
checking for stdio.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for strings.h... yes
checking for sys/stat.h... yes
checking for sys/types.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for windres... no
checking for gawk... (cached) mawk
checking for gcc... (cached) gcc
checking whether the compiler supports GNU C... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking for gcc option to enable C11 features... (cached) none needed
checking for g++... g++
checking whether the compiler supports GNU C++... yes
checking whether g++ accepts -g... yes
checking for g++ option to enable C++11 features... none needed
checking how to run the C++ preprocessor... g++ -E
checking for ld used by g++... /usr/bin/ld -m elf_x86_64
checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC -DPIC
checking if g++ PIC flag -fPIC -DPIC works... yes
checking if g++ static flag -static works... yes
checking if g++ supports -c -o file.o... yes
checking if g++ supports -c -o file.o... (cached) yes
checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... (cached) GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking for egrep... (cached) /usr/bin/grep -E
checking for fgrep... (cached) /usr/bin/grep -F
checking for a BSD-compatible install... /usr/bin/install -c
checking whether make sets $(MAKE)... yes
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for gsort... no
checking for sort... sort
checking for special C compiler options needed for large files... no
checking for _FILE_OFFSET_BITS value needed for large files... no
checking for an ANSI C-conforming const... yes
checking for inline... inline
checking for working volatile... yes
checking for linker option --no-undefined... yes
checking for linker option --dynamicbase... no
checking for linker option --nxcompat... no
checking for linker option --high-entropy-va... no
checking for sys/types.h... (cached) yes
checking for stdio.h... (cached) yes
checking for stdlib.h... (cached) yes
checking for stddef.h... yes
checking for stdarg.h... yes
checking for malloc.h... yes
checking for memory.h... yes
checking for string.h... (cached) yes
checking for strings.h... (cached) yes
checking for wchar.h... yes
checking for inttypes.h... (cached) yes
checking for stdint.h... (cached) yes
checking for limits.h... yes
checking for ctype.h... yes
checking for math.h... yes
checking for float.h... yes
checking for iconv.h... yes
checking for signal.h... yes
checking for size_t... yes
checking how to run the C preprocessor... gcc -E
checking for M_PI in math.h... yes
checking for working alloca.h... yes
checking for alloca... yes
checking for mprotect... yes
checking for malloc... yes
checking for calloc... yes
checking for realloc... yes
checking for free... yes
checking for getenv... yes
checking for setenv... yes
checking for putenv... yes
checking for unsetenv... yes
checking for bsearch... yes
checking for qsort... yes
checking for abs... yes
checking for bcopy... yes
checking for memset... yes
checking for memcmp... yes
checking for memcpy... yes
checking for memmove... yes
checking for wcslen... yes
checking for wcslcpy... yes
checking for wcslcat... yes
checking for _wcsdup... no
checking for wcsdup... yes
checking for wcsstr... yes
checking for wcscmp... yes
checking for wcsncmp... yes
checking for wcscasecmp... yes
checking for _wcsicmp... no
checking for wcsncasecmp... yes
checking for _wcsnicmp... no
checking for strlen... yes
checking for strlcpy... yes
checking for strlcat... yes
checking for _strrev... no
checking for _strupr... no
checking for _strlwr... no
checking for index... yes
checking for rindex... yes
checking for strchr... yes
checking for strrchr... yes
checking for strstr... yes
checking for strtok_r... yes
checking for itoa... no
checking for _ltoa... no
checking for _uitoa... no
checking for _ultoa... no
checking for strtod... yes
checking for strtol... yes
checking for strtoul... yes
checking for _i64toa... no
checking for _ui64toa... no
checking for strtoll... yes
checking for strtoull... yes
checking for atoi... yes
checking for atof... yes
checking for strcmp... yes
checking for strncmp... yes
checking for _stricmp... no
checking for strcasecmp... yes
checking for _strnicmp... no
checking for strncasecmp... yes
checking for strcasestr... yes
checking for vsscanf... yes
checking for vsnprintf... yes
checking for fopen64... yes
checking for fseeko... yes
checking for fseeko64... yes
checking for sigaction... yes
checking for setjmp... yes
checking for nanosleep... yes
checking for sysconf... yes
checking for sysctlbyname... no
checking for getauxval... yes
checking for elf_aux_info... no
checking for poll... yes
checking for memfd_create... yes
checking for posix_fallocate... yes
checking for _Exit... yes
checking for pow in -lm... yes
checking for acos... yes
checking for acosf... yes
checking for asin... yes
checking for asinf... yes
checking for atan... yes
checking for atanf... yes
checking for atan2... yes
checking for atan2f... yes
checking for ceil... yes
checking for ceilf... yes
checking for copysign... yes
checking for copysignf... yes
checking for cos... yes
checking for cosf... yes
checking for exp... yes
checking for expf... yes
checking for fabs... yes
checking for fabsf... yes
checking for floor... yes
checking for floorf... yes
checking for trunc... yes
checking for truncf... yes
checking for fmod... yes
checking for fmodf... yes
checking for log... yes
checking for logf... yes
checking for log10... yes
checking for log10f... yes
checking for lround... yes
checking for lroundf... yes
checking for pow... yes
checking for powf... yes
checking for round... yes
checking for roundf... yes
checking for scalbn... yes
checking for scalbnf... yes
checking for sin... yes
checking for sinf... yes
checking for sqrt... yes
checking for sqrtf... yes
checking for tan... yes
checking for tanf... yes
checking for iconv in libc... yes
checking for iconv in libiconv... no
-- Using iconv from libc
checking for struct sigaction.sa_sigaction... yes
checking for libunwind.h... no
checking for GCC builtin atomic operations... yes
checking for GCC -mmmx option... yes
checking for GCC -m3dnow option... yes
checking for GCC -msse option... yes
checking for GCC -msse2 option... yes
checking for GCC -msse3 option... yes
checking for immintrin.h... yes
checking for Altivec with GCC altivec.h and -maltivec option... no
checking for Altivec with GCC -maltivec option... no
checking for Altivec with GCC altivec.h and -faltivec option... no
checking for Altivec with GCC -faltivec option... no
checking for GCC -mlsx option... no
checking for lsxintrin.h... no
checking for GCC -Wall option... yes
checking for necessary GCC -Wno-multichar option... no
checking for GCC -Wunused-local-typedefs option... yes
checking for GCC -fno-strict-aliasing option... yes
checking for GCC -fvisibility=hidden option... yes
checking for GCC -Wdeclaration-after-statement option... yes
checking for dlfcn.h... (cached) yes
checking for dlopen in -lc... yes
checking for dlopen... yes
checking for O_CLOEXEC... yes
checking for OSS audio support... yes
checking for ALSA CFLAGS...
checking for ALSA LDFLAGS...  -lasound -lm -ldl -lpthread
checking for libasound headers version >= 1.0.11... found.
checking for snd_ctl_open in -lasound... yes
-- dynamic libasound -> libasound.so.2
checking for libpipewire-0.3 >= 0.3.20... yes
-- dynamic libpipewire-0.3 -> libpipewire-0.3.so.0
checking for libpulse >= 0.9.15... yes
-- dynamic libpulse -> libpulse.so.0
checking for jack >= 0.125... yes
-- dynamic libjack -> libjack.so.0
checking for sndio... yes
-- dynamic libsndio -> libsndio.so.7
checking for samplerate.h... yes
-- dynamic libsamplerate -> libsamplerate.so.0
checking for bcm_host brcmegl... no
checking for Raspberry Pi 2/3... no
checking for X... libraries , headers
checking for gethostbyname... yes
checking for connect... yes
checking for remove... yes
checking for shmat... yes
checking for IceConnectionNumber in -lICE... yes
checking for X11/extensions/Xext.h... yes
-- dynamic libX11 -> libX11.so.6
-- dynamic libX11ext -> libXext.so.6
checking for XGenericEvent... yes
checking for XkbKeycodeToKeysym in -lX11... yes
checking for X11/Xcursor/Xcursor.h... yes
-- dynamic libXcursor -> libXcursor.so.1
checking for X11/extensions/Xdbe.h... yes
checking for X11/extensions/XInput2.h... yes
-- dynamic libXi -> libXi.so.6
checking for xinput2 multitouch... yes
checking for X11/extensions/Xfixes.h... yes
-- dynamic libXfixes -> libXfixes.so.3
-- dynamic libXrandr -> libXrandr.so.2
checking for X11/extensions/scrnsaver.h... yes
-- dynamic libXss -> libXss.so.1
checking for X11/extensions/shape.h... yes
checking for EGL support... yes
checking for libdrm >= 1.4.82... yes
checking for gbm >= 11.1.0... yes
checking for kmsdrm dynamic loading support... yes
-- dynamic libdrm -> libdrm.so.2
-- dynamic libgbm -> libgbm.so.1
checking for GLX support... yes
checking for OpenGL headers... yes
checking for OpenGL ES v1 headers... yes
checking for OpenGL ES v2 headers... yes
checking for Wayland support... yes
-- dynamic libwayland-client -> libwayland-client.so.0
-- dynamic libwayland-egl -> libwayland-egl.so.1
-- dynamic libwayland-cursor -> libwayland-cursor.so.0
-- dynamic libxkbcommon -> libxkbcommon.so.0
checking for libdecor-0... yes
-- dynamic libdecor -> libdecor-0.so.0
checking for gcc options needed to detect all undeclared functions... none needed
checking whether libdecor_frame_get_min_content_size is declared... yes
checking whether libdecor_frame_get_max_content_size is declared... yes
checking for linux/input.h... yes
checking for Linux 2.4 unified input interface... yes
checking for libudev.h... yes
-- dynamic udev -> libudev.so.1
checking for dbus-1... yes
checking for dbus/dbus.h... yes
checking for sys/inotify.h... yes
checking for inotify_init... yes
checking for inotify_init1... yes
checking for ibus-1.0... yes
checking for ibus-1.0/ibus.h... yes
checking for fcitx support... yes
checking for Linux kd.h... yes
checking for hidapi joystick support... yes
checking for pthreads... yes
checking for recursive mutexes... yes
checking for pthread semaphores... yes
checking for sem_timedwait... yes
checking for pthread_np.h... no
checking for pthread_setname_np... yes
checking for pthread_set_name_np... no
checking for clock_gettime in -lc... yes
checking for linux/version.h... yes
checking for Vivante VDK API... no
checking for Vivante FB API... no
checking whether to install sdl2-config... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating sdl2-config
config.status: creating sdl2-config.cmake
config.status: creating sdl2-config-version.cmake
config.status: creating SDL2.spec
config.status: creating sdl2.pc
config.status: creating include/SDL_config.h
config.status: executing libtool commands
config.status: executing sdl2_config commands
config.status: executing summary commands
SDL2 Configure Summary:
Building Shared Libraries
Building Static Libraries
Enabled modules : atomic audio video render events joystick haptic hidapi sensor power filesystem threads timers file misc locale loadso cpuinfo assembly
Assembly Math   : mmx 3dnow sse sse2 sse3
Audio drivers   : disk dummy oss alsa(dynamic) pipewire(dynamic) pulse(dynamic) jack(dynamic) sndio(dynamic)
Video drivers   : dummy offscreen x11(dynamic) kmsdrm(dynamic) opengl opengl_es1 opengl_es2 vulkan wayland(dynamic)
X11 libraries   : xcursor xdbe xinput2 xinput2_multitouch xfixes xrandr xscrnsaver xshape
Input drivers   : linuxev linuxkd
Enable virtual joystick APIs : YES
Using libsamplerate : YES
Using libudev       : YES
Using dbus          : YES
Using ime           : YES
Using ibus          : YES
Using fcitx         : YES
make[1]: uscita dalla directory «/home/diabolik/RetroPie-Setup/tmp/build/sdl2/2.30.8+1»
   debian/rules override_dh_auto_build
make[1]: ingresso nella directory «/home/diabolik/RetroPie-Setup/tmp/build/sdl2/2.30.8+1»
dh_auto_build -Bbuilddir/all
	cd builddir/all && make -j4
make[2]: ingresso nella directory «/home/diabolik/RetroPie-Setup/tmp/build/sdl2/2.30.8+1/builddir/all»
Warning, configure is out of date, please re-run autogen.sh
mkdir -p -- gen
mkdir -p -- gen
mkdir -p -- gen
  GEN    gen/fractional-scale-v1-client-protocol.h
  GEN    gen/idle-inhibit-unstable-v1-client-protocol.h
mkdir -p -- gen
  GEN    gen/keyboard-shortcuts-inhibit-unstable-v1-client-protocol.h
  GEN    gen/pointer-constraints-unstable-v1-client-protocol.h
  GEN    gen/primary-selection-unstable-v1-client-protocol.h
  GEN    gen/relative-pointer-unstable-v1-client-protocol.h
  GEN    gen/text-input-unstable-v3-client-protocol.h
  GEN    gen/viewporter-client-protocol.h
  GEN    gen/tablet-unstable-v2-client-protocol.h
  GEN    gen/wayland-client-protocol.h
  GEN    gen/xdg-activation-v1-client-protocol.h
  GEN    gen/xdg-decoration-unstable-v1-client-protocol.h
  GEN    gen/xdg-output-unstable-v1-client-protocol.h
  GEN    gen/xdg-shell-client-protocol.h
  GEN    gen/fractional-scale-v1-protocol.c
  GEN    gen/idle-inhibit-unstable-v1-protocol.c
  GEN    gen/keyboard-shortcuts-inhibit-unstable-v1-protocol.c
  GEN    gen/pointer-constraints-unstable-v1-protocol.c
  GEN    gen/primary-selection-unstable-v1-protocol.c
  GEN    gen/relative-pointer-unstable-v1-protocol.c
  GEN    gen/tablet-unstable-v2-protocol.c
  GEN    gen/text-input-unstable-v3-protocol.c
  GEN    gen/viewporter-protocol.c
  GEN    gen/wayland-protocol.c
  GEN    gen/xdg-decoration-unstable-v1-protocol.c
  GEN    gen/xdg-activation-v1-protocol.c
  GEN    gen/xdg-output-unstable-v1-protocol.c
/bin/bash ../../build-scripts//updaterev.sh --vendor ""
/bin/bash ../../build-scripts//mkinstalldirs build
mkdir -p -- build
touch build/.created
  GEN    gen/xdg-shell-protocol.c
  CC     build/fractional-scale-v1-protocol.lo
  CC     build/idle-inhibit-unstable-v1-protocol.lo
  CC     build/keyboard-shortcuts-inhibit-unstable-v1-protocol.lo
  CC     build/pointer-constraints-unstable-v1-protocol.lo
  CC     build/primary-selection-unstable-v1-protocol.lo
  CC     build/relative-pointer-unstable-v1-protocol.lo
  CC     build/tablet-unstable-v2-protocol.lo
  CC     build/text-input-unstable-v3-protocol.lo
  CC     build/viewporter-protocol.lo
  CC     build/wayland-protocol.lo
  CC     build/xdg-activation-v1-protocol.lo
  CC     build/xdg-decoration-unstable-v1-protocol.lo
  CC     build/xdg-output-unstable-v1-protocol.lo
  CC     build/SDL.lo
  CC     build/xdg-shell-protocol.lo
  CC     build/SDL_assert.lo
  CC     build/SDL_dataqueue.lo
  CC     build/SDL_error.lo
  CC     build/SDL_guid.lo
  CC     build/SDL_hints.lo
  CC     build/SDL_list.lo
  CC     build/SDL_log.lo
  CC     build/SDL_utils.lo
  CC     build/SDL_atomic.lo
  CC     build/SDL_spinlock.lo
  CC     build/SDL_audio.lo
  CC     build/SDL_audiocvt.lo
  CC     build/SDL_audiodev.lo
  CC     build/SDL_audiotypecvt.lo
  CC     build/SDL_mixer.lo
  CC     build/SDL_wave.lo
  CC     build/SDL_cpuinfo.lo
  CC     build/SDL_dynapi.lo
  CC     build/SDL_clipboardevents.lo
  CC     build/SDL_displayevents.lo
  CC     build/SDL_dropevents.lo
  CC     build/SDL_events.lo
  CC     build/SDL_gesture.lo
  CC     build/SDL_keyboard.lo
  CC     build/SDL_keysym_to_scancode.lo
  CC     build/SDL_mouse.lo
  CC     build/SDL_quit.lo
  CC     build/SDL_scancode_tables.lo
  CC     build/SDL_touch.lo
  CC     build/SDL_windowevents.lo
  CC     build/imKStoUCS.lo
  CC     build/SDL_rwops.lo
  CC     build/SDL_haptic.lo
  CC     build/SDL_hidapi.lo
  CC     build/SDL_gamecontroller.lo
  CC     build/SDL_joystick.lo
  CC     build/SDL_steam_virtual_gamepad.lo
  CC     build/controller_type.lo
  CC     build/e_atan2.lo
  CC     build/e_exp.lo
  CC     build/e_fmod.lo
  CC     build/e_log.lo
  CC     build/e_log10.lo
  CC     build/e_pow.lo
  CC     build/e_rem_pio2.lo
  CC     build/e_sqrt.lo
  CC     build/k_cos.lo
  CC     build/k_rem_pio2.lo
  CC     build/k_sin.lo
  CC     build/k_tan.lo
  CC     build/s_atan.lo
  CC     build/s_copysign.lo
  CC     build/s_cos.lo
  CC     build/s_fabs.lo
  CC     build/s_floor.lo
  CC     build/s_scalbn.lo
  CC     build/s_sin.lo
  CC     build/s_tan.lo
  CC     build/SDL_url.lo
  CC     build/SDL_power.lo
  CC     build/SDL_d3dmath.lo
  CC     build/SDL_render.lo
  CC     build/SDL_yuv_sw.lo
  CC     build/SDL_render_d3d.lo
  CC     build/SDL_shaders_d3d.lo
  CC     build/SDL_render_d3d11.lo
  CC     build/SDL_shaders_d3d11.lo
  CC     build/SDL_render_d3d12.lo
  CC     build/SDL_shaders_d3d12.lo
  CC     build/SDL_render_gl.lo
  CC     build/SDL_shaders_gl.lo
  CC     build/SDL_render_gles.lo
  CC     build/SDL_render_gles2.lo
  CC     build/SDL_shaders_gles2.lo
  CC     build/SDL_render_ps2.lo
  CC     build/SDL_render_psp.lo
  CC     build/SDL_blendfillrect.lo
  CC     build/SDL_blendline.lo
  CC     build/SDL_blendpoint.lo
  CC     build/SDL_drawline.lo
  CC     build/SDL_drawpoint.lo
  CC     build/SDL_render_sw.lo
  CC     build/SDL_rotate.lo
  CC     build/SDL_triangle.lo
  CC     build/SDL_render_vita_gxm.lo
  CC     build/SDL_render_vita_gxm_memory.lo
  CC     build/SDL_render_vita_gxm_tools.lo
  CC     build/SDL_sensor.lo
  CC     build/SDL_crc16.lo
  CC     build/SDL_crc32.lo
  CC     build/SDL_getenv.lo
  CC     build/SDL_iconv.lo
  CC     build/SDL_malloc.lo
  CC     build/SDL_mslibc.lo
  CC     build/SDL_qsort.lo
  CC     build/SDL_stdlib.lo
  CC     build/SDL_string.lo
  CC     build/SDL_strtokr.lo
  CC     build/SDL_thread.lo
  CC     build/SDL_timer.lo
  CC     build/SDL_RLEaccel.lo
  CC     build/SDL_blit.lo
  CC     build/SDL_blit_0.lo
  CC     build/SDL_blit_1.lo
  CC     build/SDL_blit_A.lo
  CC     build/SDL_blit_N.lo
  CC     build/SDL_blit_auto.lo
  CC     build/SDL_blit_copy.lo
  CC     build/SDL_blit_slow.lo
  CC     build/SDL_bmp.lo
  CC     build/SDL_clipboard.lo
  CC     build/SDL_egl.lo
  CC     build/SDL_fillrect.lo
  CC     build/SDL_pixels.lo
  CC     build/SDL_rect.lo
  CC     build/SDL_shape.lo
  CC     build/SDL_stretch.lo
  CC     build/SDL_surface.lo
  CC     build/SDL_video.lo
  CC     build/SDL_vulkan_utils.lo
  CC     build/SDL_yuv.lo
  CC     build/yuv_rgb_lsx.lo
  CC     build/yuv_rgb_sse.lo
  CC     build/yuv_rgb_std.lo
  CC     build/SDL_locale.lo
  CC     build/SDL_nullevents.lo
  CC     build/SDL_nullframebuffer.lo
  CC     build/SDL_nullvideo.lo
  CC     build/SDL_offscreenevents.lo
  CC     build/SDL_offscreenframebuffer.lo
  CC     build/SDL_offscreenopengles.lo
  CC     build/SDL_offscreenvideo.lo
  CC     build/SDL_offscreenwindow.lo
  CC     build/SDL_diskaudio.lo
  CC     build/SDL_dummyaudio.lo
  CC     build/SDL_sysloadso.lo
  CC     build/SDL_dspaudio.lo
  CC     build/SDL_alsa_audio.lo
  CC     build/SDL_pipewire.lo
  CC     build/SDL_pulseaudio.lo
  CC     build/SDL_jackaudio.lo
  CC     build/SDL_sndioaudio.lo
  CC     build/SDL_x11clipboard.lo
  CC     build/SDL_x11dyn.lo
  CC     build/SDL_x11events.lo
  CC     build/SDL_x11framebuffer.lo
  CC     build/SDL_x11keyboard.lo
  CC     build/SDL_x11messagebox.lo
  CC     build/SDL_x11modes.lo
  CC     build/SDL_x11mouse.lo
  CC     build/SDL_x11opengl.lo
  CC     build/SDL_x11opengles.lo
  CC     build/SDL_x11shape.lo
  CC     build/SDL_x11touch.lo
  CC     build/SDL_x11video.lo
  CC     build/SDL_x11vulkan.lo
  CC     build/SDL_x11window.lo
  CC     build/SDL_x11xfixes.lo
  CC     build/SDL_x11xinput2.lo
  CC     build/edid-parse.lo
  CC     build/SDL_kmsdrmdyn.lo
  CC     build/SDL_kmsdrmevents.lo
  CC     build/SDL_kmsdrmmouse.lo
  CC     build/SDL_kmsdrmopengles.lo
  CC     build/SDL_kmsdrmvideo.lo
  CC     build/SDL_kmsdrmvulkan.lo
  CC     build/SDL_waylandclipboard.lo
  CC     build/SDL_waylanddatamanager.lo
  CC     build/SDL_waylanddyn.lo
  CC     build/SDL_waylandevents.lo
  CC     build/SDL_waylandkeyboard.lo
  CC     build/SDL_waylandmessagebox.lo
  CC     build/SDL_waylandmouse.lo
  CC     build/SDL_waylandopengles.lo
  CC     build/SDL_waylandtouch.lo
  CC     build/SDL_waylandvideo.lo
  CC     build/SDL_waylandvulkan.lo
  CC     build/SDL_waylandwindow.lo
  CC     build/SDL_dbus.lo
  CC     build/SDL_ime.lo
  CC     build/SDL_ibus.lo
  CC     build/SDL_fcitx.lo
  CC     build/SDL_hidapi_combined.lo
  CC     build/SDL_hidapi_gamecube.lo
  CC     build/SDL_hidapi_luna.lo
  CC     build/SDL_hidapi_ps3.lo
  CC     build/SDL_hidapi_ps4.lo
  CC     build/SDL_hidapi_ps5.lo
  CC     build/SDL_hidapi_rumble.lo
  CC     build/SDL_hidapi_shield.lo
  CC     build/SDL_hidapi_stadia.lo
  CC     build/SDL_hidapi_steam.lo
  CC     build/SDL_hidapi_steamdeck.lo
  CC     build/SDL_hidapi_switch.lo
  CC     build/SDL_hidapi_wii.lo
  CC     build/SDL_hidapi_xbox360w.lo
  CC     build/SDL_hidapi_xbox360.lo
  CC     build/SDL_hidapi_xboxone.lo
  CC     build/SDL_hidapijoystick.lo
  CC     build/SDL_systhread.lo
  CC     build/SDL_syssem.lo
  CC     build/SDL_sysmutex.lo
  CC     build/SDL_syscond.lo
  CC     build/SDL_systls.lo
  CC     build/SDL_sysurl.lo
  CC     build/SDL_syslocale.lo
  CC     build/SDL_sysjoystick.lo
  CC     build/SDL_steamcontroller.lo
  CC     build/SDL_syshaptic.lo
  CC     build/SDL_syspower.lo
  CC     build/SDL_sysfilesystem.lo
  CC     build/SDL_systimer.lo
  CC     build/SDL_udev.lo
  CC     build/SDL_evdev.lo
  CC     build/SDL_evdev_kbd.lo
  CC     build/SDL_evdev_kbd_freebsd.lo
  CC     build/SDL_evdev_capabilities.lo
  CC     build/SDL_threadprio.lo
  CC     build/SDL_sandbox.lo
  CC     build/SDL_poll.lo
  CC     build/SDL_virtualjoystick.lo
  CC     build/SDL_dummysensor.lo
  CC     build/SDL_dummy_main.lo
  CC     build/SDL_test_assert.lo
  CC     build/SDL_test_common.lo
  CC     build/SDL_test_compare.lo
  CC     build/SDL_test_crc32.lo
  CC     build/SDL_test_font.lo
  CC     build/SDL_test_fuzzer.lo
  CC     build/SDL_test_harness.lo
  CC     build/SDL_test_imageBlit.lo
  CC     build/SDL_test_imageBlitBlend.lo
  CC     build/SDL_test_imageFace.lo
  CC     build/SDL_test_imagePrimitives.lo
  CC     build/SDL_test_imagePrimitivesBlend.lo
  CC     build/SDL_test_log.lo
  CC     build/SDL_test_md5.lo
  CC     build/SDL_test_memory.lo
  CC     build/SDL_test_random.lo
  LTLINK build/libSDL2.la
  LTLINK build/libSDL2main.la
ar: `u' modifier ignored since `D' is the default (see `U')
ar: `u' modifier ignored since `D' is the default (see `U')
  LTLINK build/libSDL2_test.la
ar: `u' modifier ignored since `D' is the default (see `U')
make[2]: uscita dalla directory «/home/diabolik/RetroPie-Setup/tmp/build/sdl2/2.30.8+1/builddir/all»
tar czf debian/examples.tar.gz test
make[1]: uscita dalla directory «/home/diabolik/RetroPie-Setup/tmp/build/sdl2/2.30.8+1»
   create-stamp debian/debhelper-build-stamp
 debian/rules binary
dh binary --parallel --without autoreconf
   dh_testroot
   dh_prep
   debian/rules override_dh_auto_install
make[1]: ingresso nella directory «/home/diabolik/RetroPie-Setup/tmp/build/sdl2/2.30.8+1»
dh_auto_install -Bbuilddir/all
	cd builddir/all && make -j1 install DESTDIR=/home/diabolik/RetroPie-Setup/tmp/build/sdl2/2.30.8\+1/debian/tmp AM_UPDATE_INFO_DIR=no
make[2]: ingresso nella directory «/home/diabolik/RetroPie-Setup/tmp/build/sdl2/2.30.8+1/builddir/all»
Warning, configure is out of date, please re-run autogen.sh
/bin/bash ../../build-scripts//updaterev.sh --vendor ""
/bin/bash ../../build-scripts//mkinstalldirs /home/diabolik/RetroPie-Setup/tmp/build/sdl2/2.30.8+1/debian/tmp/usr/bin
mkdir -p -- /home/diabolik/RetroPie-Setup/tmp/build/sdl2/2.30.8+1/debian/tmp/usr/bin
/usr/bin/install -c -m 755 sdl2-config /home/diabolik/RetroPie-Setup/tmp/build/sdl2/2.30.8+1/debian/tmp/usr/bin/sdl2-config
/bin/bash ../../build-scripts//mkinstalldirs /home/diabolik/RetroPie-Setup/tmp/build/sdl2/2.30.8+1/debian/tmp/usr/include/SDL2
mkdir -p -- /home/diabolik/RetroPie-Setup/tmp/build/sdl2/2.30.8+1/debian/tmp/usr/include/SDL2
for file in SDL.h SDL_assert.h SDL_atomic.h SDL_audio.h SDL_bits.h SDL_blendmode.h SDL_clipboard.h SDL_cpuinfo.h SDL_egl.h SDL_endian.h SDL_error.h SDL_events.h SDL_filesystem.h SDL_gamecontroller.h SDL_gesture.h SDL_guid.h SDL_haptic.h SDL_hidapi.h SDL_hints.h SDL_joystick.h SDL_keyboard.h SDL_keycode.h SDL_loadso.h SDL_locale.h SDL_log.h SDL_main.h SDL_messagebox.h SDL_metal.h SDL_misc.h SDL_mouse.h SDL_mutex.h SDL_name.h SDL_opengl.h SDL_opengl_glext.h SDL_opengles.h SDL_opengles2_gl2ext.h SDL_opengles2_gl2.h SDL_opengles2_gl2platform.h SDL_opengles2.h SDL_opengles2_khrplatform.h SDL_pixels.h SDL_platform.h SDL_power.h SDL_quit.h SDL_rect.h SDL_render.h SDL_rwops.h SDL_scancode.h SDL_sensor.h SDL_shape.h SDL_stdinc.h SDL_surface.h SDL_system.h SDL_syswm.h SDL_thread.h SDL_timer.h SDL_touch.h SDL_types.h SDL_version.h SDL_video.h SDL_vulkan.h begin_code.h close_code.h SDL_test_assert.h SDL_test_common.h SDL_test_compare.h SDL_test_crc32.h SDL_test_font.h SDL_test_fuzzer.h SDL_test.h SDL_test_harness.h SDL_test_images.h SDL_test_log.h SDL_test_md5.h SDL_test_memory.h SDL_test_random.h; do \
    /usr/bin/install -c -m 644 /home/diabolik/RetroPie-Setup/tmp/build/sdl2/2.30.8+1/include/$file /home/diabolik/RetroPie-Setup/tmp/build/sdl2/2.30.8+1/debian/tmp/usr/include/SDL2/$file; \
done
/usr/bin/install -c -m 644 include/SDL_config.h /home/diabolik/RetroPie-Setup/tmp/build/sdl2/2.30.8+1/debian/tmp/usr/include/SDL2/SDL_config.h
if test -f include/SDL_revision.h; then \
    /usr/bin/install -c -m 644 include/SDL_revision.h /home/diabolik/RetroPie-Setup/tmp/build/sdl2/2.30.8+1/debian/tmp/usr/include/SDL2/SDL_revision.h; \
else \
    /usr/bin/install -c -m 644 /home/diabolik/RetroPie-Setup/tmp/build/sdl2/2.30.8+1/include/SDL_revision.h /home/diabolik/RetroPie-Setup/tmp/build/sdl2/2.30.8+1/debian/tmp/usr/include/SDL2/SDL_revision.h; \
fi
/bin/bash ../../build-scripts//mkinstalldirs /home/diabolik/RetroPie-Setup/tmp/build/sdl2/2.30.8+1/debian/tmp/usr/lib/x86_64-linux-gnu
mkdir -p -- /home/diabolik/RetroPie-Setup/tmp/build/sdl2/2.30.8+1/debian/tmp/usr/lib/x86_64-linux-gnu
/bin/bash ./libtool --quiet --mode=install /usr/bin/install -c build/libSDL2.la /home/diabolik/RetroPie-Setup/tmp/build/sdl2/2.30.8+1/debian/tmp/usr/lib/x86_64-linux-gnu/libSDL2.la
libtool: warning: remember to run 'libtool --finish /usr/lib/x86_64-linux-gnu'
/bin/bash ./libtool --quiet --mode=install /usr/bin/install -c build/libSDL2main.la /home/diabolik/RetroPie-Setup/tmp/build/sdl2/2.30.8+1/debian/tmp/usr/lib/x86_64-linux-gnu/libSDL2main.la
libtool: warning: remember to run 'libtool --finish /usr/lib/x86_64-linux-gnu'
/bin/bash ./libtool --quiet --mode=install /usr/bin/install -c build/libSDL2_test.la /home/diabolik/RetroPie-Setup/tmp/build/sdl2/2.30.8+1/debian/tmp/usr/lib/x86_64-linux-gnu/libSDL2_test.la
libtool: warning: remember to run 'libtool --finish /usr/lib/x86_64-linux-gnu'
/bin/bash ../../build-scripts//mkinstalldirs /home/diabolik/RetroPie-Setup/tmp/build/sdl2/2.30.8+1/debian/tmp/usr/share/aclocal
mkdir -p -- /home/diabolik/RetroPie-Setup/tmp/build/sdl2/2.30.8+1/debian/tmp/usr/share/aclocal
/usr/bin/install -c -m 644 /home/diabolik/RetroPie-Setup/tmp/build/sdl2/2.30.8+1/sdl2.m4 /home/diabolik/RetroPie-Setup/tmp/build/sdl2/2.30.8+1/debian/tmp/usr/share/aclocal/sdl2.m4
/bin/bash ../../build-scripts//mkinstalldirs /home/diabolik/RetroPie-Setup/tmp/build/sdl2/2.30.8+1/debian/tmp/usr/lib/x86_64-linux-gnu/pkgconfig
mkdir -p -- /home/diabolik/RetroPie-Setup/tmp/build/sdl2/2.30.8+1/debian/tmp/usr/lib/x86_64-linux-gnu/pkgconfig
/usr/bin/install -c -m 644 sdl2.pc /home/diabolik/RetroPie-Setup/tmp/build/sdl2/2.30.8+1/debian/tmp/usr/lib/x86_64-linux-gnu/pkgconfig
/bin/bash ../../build-scripts//mkinstalldirs /home/diabolik/RetroPie-Setup/tmp/build/sdl2/2.30.8+1/debian/tmp/usr/lib/x86_64-linux-gnu/cmake/SDL2
mkdir -p -- /home/diabolik/RetroPie-Setup/tmp/build/sdl2/2.30.8+1/debian/tmp/usr/lib/x86_64-linux-gnu/cmake/SDL2
/usr/bin/install -c -m 644 sdl2-config.cmake /home/diabolik/RetroPie-Setup/tmp/build/sdl2/2.30.8+1/debian/tmp/usr/lib/x86_64-linux-gnu/cmake/SDL2
/usr/bin/install -c -m 644 sdl2-config-version.cmake /home/diabolik/RetroPie-Setup/tmp/build/sdl2/2.30.8+1/debian/tmp/usr/lib/x86_64-linux-gnu/cmake/SDL2
make[2]: uscita dalla directory «/home/diabolik/RetroPie-Setup/tmp/build/sdl2/2.30.8+1/builddir/all»
make[1]: uscita dalla directory «/home/diabolik/RetroPie-Setup/tmp/build/sdl2/2.30.8+1»
   debian/rules override_dh_install
make[1]: ingresso nella directory «/home/diabolik/RetroPie-Setup/tmp/build/sdl2/2.30.8+1»
dh_install --remaining-packages -XlibSDL2.la
make[1]: uscita dalla directory «/home/diabolik/RetroPie-Setup/tmp/build/sdl2/2.30.8+1»
   dh_installdocs
   dh_installchangelogs
   debian/rules override_dh_installexamples
make[1]: ingresso nella directory «/home/diabolik/RetroPie-Setup/tmp/build/sdl2/2.30.8+1»
dh_installexamples -plibsdl2-dev debian/examples.tar.gz
dh_installexamples --remaining-packages
make[1]: uscita dalla directory «/home/diabolik/RetroPie-Setup/tmp/build/sdl2/2.30.8+1»
   dh_installman
   dh_perl
   debian/rules override_dh_link
make[1]: ingresso nella directory «/home/diabolik/RetroPie-Setup/tmp/build/sdl2/2.30.8+1»
# to address lintian warning
# W: libsdl2-2.0-0: dev-pkg-without-shlib-symlink usr/lib/x86_64-linux-gnu/libSDL2-2.0.so.0.0.0 usr/lib/x86_64-linux-gnu/libSDL2-2.0.so
dh_link -plibsdl2-dev usr/lib/x86_64-linux-gnu/libSDL2-2.0.so.0.0.0 usr/lib/x86_64-linux-gnu/libSDL2-2.0.so
make[1]: uscita dalla directory «/home/diabolik/RetroPie-Setup/tmp/build/sdl2/2.30.8+1»
   dh_strip_nondeterminism
   dh_compress
   dh_fixperms
   debian/rules override_dh_missing
make[1]: ingresso nella directory «/home/diabolik/RetroPie-Setup/tmp/build/sdl2/2.30.8+1»
dh_missing --list-missing
make[1]: uscita dalla directory «/home/diabolik/RetroPie-Setup/tmp/build/sdl2/2.30.8+1»
   debian/rules override_dh_strip
make[1]: ingresso nella directory «/home/diabolik/RetroPie-Setup/tmp/build/sdl2/2.30.8+1»
dh_strip --dbg-package=libsdl2-dbg
0559cf410aa5a1191cf2ad54052470d73d3b0519
make[1]: uscita dalla directory «/home/diabolik/RetroPie-Setup/tmp/build/sdl2/2.30.8+1»
   dh_makeshlibs
   dh_shlibdeps
   dh_installdeb
   dh_gencontrol
   dh_md5sums
   dh_builddeb
dpkg-deb: generazione del pacchetto "libsdl2-dev" in "../libsdl2-dev_2.30.8+1_amd64.deb".
dpkg-deb: generazione del pacchetto "libsdl2-dbg" in "../libsdl2-dbg_2.30.8+1_amd64.deb".
dpkg-deb: generazione del pacchetto "libsdl2-2.0-0" in "../libsdl2-2.0-0_2.30.8+1_amd64.deb".
 dpkg-genbuildinfo --build=binary -O../libsdl2_2.30.8+1_amd64.buildinfo
 dpkg-genchanges --build=binary -O../libsdl2_2.30.8+1_amd64.changes
dpkg-genchanges: Informazioni: caricamento solo binario (nessun codice sorgente incluso)
 dpkg-source --after-build .
dpkg-buildpackage: Informazioni: caricamento solo binario (nessuna fonte inclusa)
dpkg-buildpackage: Avviso: non firmare build NON RILASCIATA; utilizzare --force-sign per eseguire l'override
/home/diabolik/RetroPie-Setup
/home/diabolik/RetroPie-Setup/tmp/build/sdl2 /home/diabolik/RetroPie-Setup
(Lettura del database... 254910 file e directory attualmente installati.)
Preparativi per estrarre libsdl2-2.0-0_2.30.8+1_amd64.deb...
Estrazione di libsdl2-2.0-0:amd64 (2.30.8+1) su (2.30.0+dfsg-1build3)...
Preparativi per estrarre libsdl2-dev_2.30.8+1_amd64.deb...
Estrazione di libsdl2-dev:amd64 (2.30.8+1) su (2.30.0+dfsg-1build3)...
Configurazione di libsdl2-2.0-0:amd64 (2.30.8+1)...
Configurazione di libsdl2-dev:amd64 (2.30.8+1)...
Elaborazione dei trigger per libc-bin (2.39-0ubuntu8.3)...
Elaborazione dei trigger per man-db (2.12.0-4build2)...
/home/diabolik/RetroPie-Setup