API tools faq
paste
Advertisement
teknoraver

flash-image-a80x0_mcbin-uefi-ga-17.10.6.bin

teknoraver
Sep 23rd, 2019
417
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 3.03 KB | None | 0 0
raw download clone embed print report
  1. BootROM - 2.03
  2. Starting CP-0 IOROM 1.07
  3. Booting from SD 0 (0x29)
  4. SD - wait_for_sd_interrupt: Error interrupt - 00008000
  5. SD - wait_for_sd_interrupt: Error interrupt status 00000003
  6. SD - sd_get_cmd_response: Get command response failed.
  7.  
  8. SD - sd_init: Failed - ret = 00000081
  9. Error: Failed initializing interface
  10. Error: Failed boot attempt 01. error = 0x0C1
  11.  
  12. BootROM - 2.03
  13. Starting CP-0 IOROM 1.07
  14. Booting from SD 0 (0x29)
  15. SD - wait_for_sd_interrupt: Error interrupt - 00008000
  16. SD - wait_for_sd_interrupt: Error interrupt status 00000003
  17. SD - sd_get_cmd_response: Get command response failed.
  18.  
  19. SD - sd_init: Failed - ret = 00000081
  20. Error: Failed initializing interface
  21. Found valid image at boot postion 0x002
  22. lNOTICE: Starting binary extension
  23. NOTICE: SVC: SW Revision 0x0. SVC is not supported
  24. mv_ddr: mv_ddr-armada-17.10.5-gf537e1d (Apr 25 2018 - 19:21:14)
  25. mv_ddr: completed successfully
  26. NOTICE: Cold boot
  27. NOTICE: Booting Trusted Firmware
  28. NOTICE: BL1: v1.3(release):armada-17.10.8:34247e0
  29. NOTICE: BL1: Built : 19:21:23, Apr 25 2018
  30. NOTICE: BL1: Booting BL2
  31. lNOTICE: BL2: v1.3(release):armada-17.10.8:34247e0
  32. NOTICE: BL2: Built : 19:21:25, Apr 25 2018
  33. BL2: Initiating SCP_BL2 transfer to SCP
  34. NOTICE: SCP_BL2 contains 2 concatenated images
  35. NOTICE: Load image to CP1 MSS
  36. NOTICE: Loading MSS image from address 0x4023020 Size 0x137c to MSS at 0xf4280000
  37. NOTICE: Done
  38. NOTICE: Load image to AP MSS
  39. NOTICE: Loading MSS image from address 0x402439c Size 0x1f68 to MSS at 0xf0580000
  40. N
  41.  
  42. FreeRTOS 7.3.0 - Marvell cm3 - A8K release armada-17.10.2
  43.  
  44. OTICE: Done
  45. NOTICE: SCP Image doesn't contain PM firmware
  46. NOTICE: BL1: Booting BL31
  47. lNOTICE: MSS PM is not supported in this build
  48. NOTICE: BL31: v1.3(release):armada-17.10.8:34247e0
  49. NOTICE: BL31: Built : 19:21:31, Apr 25 2018
  50. lUEFI firmware (version MARVELL UEFI 17.10.2 built at 19:17:17 on Apr 25 2018)
  51.  
  52. Armada 8040 MachiatoBin Platform Init
  53.  
  54. Comphy0-0: PCIE0 5 Gbps
  55. Comphy0-1: PCIE0 5 Gbps
  56. Comphy0-2: PCIE0 5 Gbps
  57. Comphy0-3: PCIE0 5 Gbps
  58. Comphy0-4: SFI 10.31 Gbps
  59. Comphy0-5: SATA1 5 Gbps
  60.  
  61. Comphy1-0: SGMII1 1.25 Gbps
  62. Comphy1-1: SATA2 5 Gbps
  63. Comphy1-2: USB3_HOST0 5 Gbps
  64. Comphy1-3: SATA3 5 Gbps
  65. Comphy1-4: SFI 10.31 Gbps
  66. Comphy1-5: SGMII2 3.125 Gbps
  67.  
  68. UTMI PHY 0 initialized to USB Host0
  69. UTMI PHY 1 initialized to USB Host1
  70. UTMI PHY 0 initialized to USB Host0
  71. RTC: Initialize controller 1
  72. Skip I2c chip 0
  73. Detected w25q32bv SPI NOR flash with page size 256 B, erase size 4 KB, total 4 MB
  74. MvFvbValidateFvHeader: No Firmware Volume header present
  75. MvFvbPrepareFvHeader: The FVB Header is not valid.
  76. MvFvbPrepareFvHeader: Installing a correct one for this volume.
  77. going to start mss_periodic_ihb_wa for mss
  78. Firmware Volume for Variable Store is corrupted
  79.  
  80. ASSERT_EFI_ERROR (Status = Volume Corrupt)
  81. ASSERT [VariableRuntimeDxe] /home/jenkins/sources/syssw/uefi/MdeModulePkg/Universal/Variable/RuntimeDxe/VariableDxe.c(477): !EFI_ERROR (Status)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!