BootROM - 2.03
Starting CP-0 IOROM 1.07
Booting from SD 0 (0x29)
SD - wait_for_sd_interrupt: Error interrupt -  00008000
SD - wait_for_sd_interrupt: Error interrupt status 00000003
SD - sd_get_cmd_response: Get command response failed.

SD - sd_init: Failed - ret = 00000081
Error: Failed initializing interface
Error: Failed boot attempt 01. error = 0x0C1

BootROM - 2.03
Starting CP-0 IOROM 1.07
Booting from SD 0 (0x29)
SD - wait_for_sd_interrupt: Error interrupt -  00008000
SD - wait_for_sd_interrupt: Error interrupt status 00000003
SD - sd_get_cmd_response: Get command response failed.

SD - sd_init: Failed - ret = 00000081
Error: Failed initializing interface
Found valid image at boot postion 0x002
lNOTICE:  Starting binary extension
NOTICE:  SVC: SW Revision 0x0. SVC is not supported
mv_ddr: mv_ddr-armada-17.10.5-gf537e1d (Apr 25 2018 - 19:21:14)
mv_ddr: completed successfully
NOTICE:  Cold boot
NOTICE:  Booting Trusted Firmware
NOTICE:  BL1: v1.3(release):armada-17.10.8:34247e0
NOTICE:  BL1: Built : 19:21:23, Apr 25 2018
NOTICE:  BL1: Booting BL2
lNOTICE:  BL2: v1.3(release):armada-17.10.8:34247e0
NOTICE:  BL2: Built : 19:21:25, Apr 25 2018
BL2: Initiating SCP_BL2 transfer to SCP
NOTICE:  SCP_BL2 contains 2 concatenated images
NOTICE:  Load image to CP1 MSS
NOTICE:  Loading MSS image from address 0x4023020 Size 0x137c to MSS at 0xf4280000
NOTICE:  Done
NOTICE:  Load image to AP MSS
NOTICE:  Loading MSS image from address 0x402439c Size 0x1f68 to MSS at 0xf0580000
N

FreeRTOS 7.3.0 - Marvell cm3 - A8K release armada-17.10.2

OTICE:  Done
NOTICE:  SCP Image doesn't contain PM firmware
NOTICE:  BL1: Booting BL31
lNOTICE:  MSS PM is not supported in this build
NOTICE:  BL31: v1.3(release):armada-17.10.8:34247e0
NOTICE:  BL31: Built : 19:21:31, Apr 25 2018
lUEFI firmware (version MARVELL UEFI 17.10.2 built at 19:17:17 on Apr 25 2018)

Armada 8040 MachiatoBin Platform Init

Comphy0-0: PCIE0         5 Gbps    
Comphy0-1: PCIE0         5 Gbps    
Comphy0-2: PCIE0         5 Gbps    
Comphy0-3: PCIE0         5 Gbps    
Comphy0-4: SFI           10.31 Gbps
Comphy0-5: SATA1         5 Gbps    

Comphy1-0: SGMII1        1.25 Gbps 
Comphy1-1: SATA2         5 Gbps    
Comphy1-2: USB3_HOST0    5 Gbps    
Comphy1-3: SATA3         5 Gbps    
Comphy1-4: SFI           10.31 Gbps
Comphy1-5: SGMII2        3.125 Gbps

UTMI PHY 0 initialized to USB Host0
UTMI PHY 1 initialized to USB Host1
UTMI PHY 0 initialized to USB Host0
RTC: Initialize controller 1
Skip I2c chip 0
Detected w25q32bv SPI NOR flash with page size 256 B, erase size 4 KB, total 4 MB
MvFvbValidateFvHeader: No Firmware Volume header present
MvFvbPrepareFvHeader: The FVB Header is not valid.
MvFvbPrepareFvHeader: Installing a correct one for this volume.
going to start mss_periodic_ihb_wa for mss
Firmware Volume for Variable Store is corrupted

ASSERT_EFI_ERROR (Status = Volume Corrupt)
ASSERT [VariableRuntimeDxe] /home/jenkins/sources/syssw/uefi/MdeModulePkg/Universal/Variable/RuntimeDxe/VariableDxe.c(477): !EFI_ERROR (Status)