Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- emuelec:~/.config/emuelec/logs # btmon
- Bluetooth monitor ver 5.64
- = Note: Linux version 4.9.269 (aarch64) 0.760966
- = Note: Bluetooth subsystem version 2.22 0.760975
- = New Index: 43:39:00:00:1F:AC (Primary,UART,hci0) [hci0] 0.760979
- = Open Index: 43:39:00:00:1F:AC [hci0] 0.760980
- = Index Info: 43:39:00:00:1F:AC (Broadcom Corporation) [hci0] 0.760981
- @ MGMT Open: bluetoothd (privileged) version 1.14 {0x0001} 0.760983
- > HCI Event: Connect Request (0x04) plen 10 #1 [hci0] 2.731128
- Address: B4:EA:9A:D0:A3:E1 (OUI B4-EA-9A)
- Class: 0x002508
- Major class: Peripheral (mouse, joystick, keyboards)
- Minor class: 0x02
- Limited Discoverable Mode
- Link type: ACL (0x01)
- < HCI Command: Accept Connection Request (0x01|0x0009) plen 7 #2 [hci0] 2.731200
- Address: B4:EA:9A:D0:A3:E1 (OUI B4-EA-9A)
- Role: Central (0x00)
- > HCI Event: Command Status (0x0f) plen 4 #3 [hci0] 2.733839
- Accept Connection Request (0x01|0x0009) ncmd 1
- Status: Success (0x00)
- > HCI Event: Role Change (0x12) plen 8 #4 [hci0] 2.893648
- Status: Success (0x00)
- Address: B4:EA:9A:D0:A3:E1 (OUI B4-EA-9A)
- Role: Central (0x00)
- > HCI Event: Connect Complete (0x03) plen 11 #5 [hci0] 2.907764
- Status: Success (0x00)
- Handle: 11
- Address: B4:EA:9A:D0:A3:E1 (OUI B4-EA-9A)
- Link type: ACL (0x01)
- Encryption: Disabled (0x00)
- < HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2 #6 [hci0] 2.908225
- Handle: 11
- > HCI Event: Command Status (0x0f) plen 4 #7 [hci0] 2.908831
- Read Remote Supported Features (0x01|0x001b) ncmd 1
- Status: Success (0x00)
- < HCI Command: Write Scan Enable (0x03|0x001a) plen 1 #8 [hci0] 2.908889
- Scan enable: No Scans (0x00)
- > HCI Event: Read Remote Supported Features (0x0b) plen 11 #9 [hci0] 2.908968
- Status: Success (0x00)
- Handle: 11
- Features: 0xbf 0xfe 0x8d 0xfe 0xc8 0x2d 0x79 0x83
- 3 slot packets
- 5 slot packets
- Encryption
- Slot offset
- Timing accuracy
- Role switch
- Sniff mode
- Power control requests
- Channel quality driven data rate (CQDDR)
- SCO link
- HV2 packets
- HV3 packets
- u-law log synchronous data
- A-law log synchronous data
- CVSD synchronous data
- Power control
- Transparent synchronous data
- Broadcast Encryption
- Enhanced Data Rate ACL 2 Mbps mode
- Enhanced Data Rate ACL 3 Mbps mode
- Enhanced inquiry scan
- Interlaced inquiry scan
- Interlaced page scan
- RSSI with inquiry results
- Extended SCO link (EV3 packets)
- AFH capable peripheral
- LE Supported (Controller)
- 3-slot Enhanced Data Rate ACL packets
- 5-slot Enhanced Data Rate ACL packets
- Pause encryption
- AFH capable central
- Enhanced Data Rate eSCO 2 Mbps mode
- Extended Inquiry Response
- Secure Simple Pairing
- Encapsulated PDU
- Erroneous Data Reporting
- Non-flushable Packet Boundary Flag
- Link Supervision Timeout Changed Event
- Inquiry TX Power Level
- Extended features
- > HCI Event: Command Complete (0x0e) plen 4 #10 [hci0] 2.909404
- Write Scan Enable (0x03|0x001a) ncmd 1
- Status: Success (0x00)
- < HCI Command: Read Remote Extended Features (0x01|0x001c) plen 3 #11 [hci0] 2.909470
- Handle: 11
- Page: 1
- > HCI Event: Command Status (0x0f) plen 4 #12 [hci0] 2.910341
- Read Remote Extended Features (0x01|0x001c) ncmd 1
- Status: Success (0x00)
- > HCI Event: Read Remote Extended Features (0x23) plen 13 #13 [hci0] 2.910495
- Status: Success (0x00)
- Handle: 11
- Page: 1/1
- Features: 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00
- Secure Simple Pairing (Host Support)
- < HCI Command: Remote Name Request (0x01|0x0019) plen 10 #14 [hci0] 2.910558
- Address: B4:EA:9A:D0:A3:E1 (OUI B4-EA-9A)
- Page scan repetition mode: R2 (0x02)
- Page scan mode: Mandatory (0x00)
- Clock offset: 0x0000
- < ACL Data TX: Handle 11 flags 0x00 dlen 10 #15 [hci0] 2.910575
- L2CAP: Information Request (0x0a) ident 1 len 2
- Type: Extended features supported (0x0002)
- > HCI Event: Command Status (0x0f) plen 4 #16 [hci0] 2.911292
- Remote Name Request (0x01|0x0019) ncmd 1
- Status: Success (0x00)
- > HCI Event: Max Slots Change (0x1b) plen 3 #17 [hci0] 2.912665
- Handle: 11
- Max slots: 5
- > HCI Event: Remote Name Req Complete (0x07) plen 255 #18 [hci0] 2.930150
- Status: Success (0x00)
- Address: B4:EA:9A:D0:A3:E1 (OUI B4-EA-9A)
- Name: Wireless Controller
- @ MGMT Event: Device Connected (0x000b) plen 39 {0x0001} [hci0] 2.930201
- BR/EDR Address: B4:EA:9A:D0:A3:E1 (OUI B4-EA-9A)
- Flags: 0x00000000
- Data length: 26
- Name (complete): Wireless Controller
- Class: 0x002508
- Major class: Peripheral (mouse, joystick, keyboards)
- Minor class: 0x02
- Limited Discoverable Mode
- > ACL Data RX: Handle 11 flags 0x02 dlen 12 #19 [hci0] 3.012655
- L2CAP: Information Response (0x0b) ident 1 len 4
- Type: Extended features supported (0x0002)
- Result: Not supported (0x0001)
- > HCI Event: Link Key Request (0x17) plen 6 #20 [hci0] 3.015176
- Address: B4:EA:9A:D0:A3:E1 (OUI B4-EA-9A)
- < HCI Command: Link Key Request Reply (0x01|0x000b) plen 22 #21 [hci0] 3.015237
- Address: B4:EA:9A:D0:A3:E1 (OUI B4-EA-9A)
- Link key: 581d03bf515312453c5838dae3f9a43f
- > HCI Event: Command Complete (0x0e) plen 10 #22 [hci0] 3.017256
- Link Key Request Reply (0x01|0x000b) ncmd 1
- Status: Success (0x00)
- Address: B4:EA:9A:D0:A3:E1 (OUI B4-EA-9A)
- > ACL Data RX: Handle 11 flags 0x02 dlen 12 #23 [hci0] 3.026391
- L2CAP: Connection Request (0x02) ident 3 len 4
- PSM: 17 (0x0011)
- Source CID: 80
- < ACL Data TX: Handle 11 flags 0x00 dlen 16 #24 [hci0] 3.026453
- L2CAP: Connection Response (0x03) ident 3 len 8
- Destination CID: 0
- Source CID: 80
- Result: Connection refused - security block (0x0003)
- Status: No further information available (0x0000)
- > HCI Event: Encryption Change (0x08) plen 4 #25 [hci0] 3.038558
- Status: Success (0x00)
- Handle: 11
- Encryption: Enabled with E0 (0x01)
- < HCI Command: Read Encryption Key Size (0x05|0x0008) plen 2 #26 [hci0] 3.038613
- Handle: 11
- > HCI Event: Command Complete (0x0e) plen 7 #27 [hci0] 3.038971
- Read Encryption Key Size (0x05|0x0008) ncmd 1
- Status: Success (0x00)
- Handle: 11
- Key size: 16
- > HCI Event: Number of Completed Packets (0x13) plen 5 #28 [hci0] 3.041428
- Num handles: 1
- Handle: 11
- Count: 2
- < HCI Command: Disconnect (0x01|0x0006) plen 3 #29 [hci0] 6.961957
- Handle: 11
- Reason: Authentication Failure (0x05)
- > HCI Event: Command Status (0x0f) plen 4 #30 [hci0] 6.962518
- Disconnect (0x01|0x0006) ncmd 1
- Status: Success (0x00)
- > HCI Event: Disconnect Complete (0x05) plen 4 #31 [hci0] 7.046298
- Status: Success (0x00)
- Handle: 11
- Reason: Connection Terminated By Local Host (0x16)
- @ MGMT Event: Device Disconnected (0x000c) plen 8 {0x0001} [hci0] 7.046349
- BR/EDR Address: B4:EA:9A:D0:A3:E1 (OUI B4-EA-9A)
- Reason: Connection terminated by local host (0x02)
- < HCI Command: Write Scan Enable (0x03|0x001a) plen 1 #32 [hci0] 7.078144
- Scan enable: Page Scan (0x02)
- > HCI Event: Command Complete (0x0e) plen 4 #33 [hci0] 7.078692
- Write Scan Enable (0x03|0x001a) ncmd 1
- Status: Success (0x00)
Add Comment
Please, Sign In to add comment