API tools faq
paste
Advertisement
altima

Untitled

altima
Sep 23rd, 2019
190
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 17.95 KB | None | 0 0
raw download clone embed print report
  1. smartctl 7.0 2018-12-30 r4883 [x86_64-linux-4.19.63-calculate] (local build)
  2. Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family: SAMSUNG SpinPoint P80 SD
  6. Device Model: SAMSUNG HD160JJ
  7. Serial Number: S08HJ10YB09809
  8. Firmware Version: ZM100-33
  9. User Capacity: 160,041,885,696 bytes [160 GB]
  10. Sector Size: 512 bytes logical/physical
  11. Device is: In smartctl database [for details use: -P show]
  12. ATA Version is: ATA/ATAPI-7 T13/1532D revision 4a
  13. Local Time is: Mon Sep 23 14:15:33 2019 MSK
  14. SMART support is: Available - device has SMART capability.
  15. SMART support is: Enabled
  16.  
  17. === START OF READ SMART DATA SECTION ===
  18. SMART overall-health self-assessment test result: PASSED
  19.  
  20. General SMART Values:
  21. Offline data collection status: (0x82) Offline data collection activity
  22. was completed without error.
  23. Auto Offline Data Collection: Enabled.
  24. Self-test execution status: ( 0) The previous self-test routine completed
  25. without error or no self-test has ever
  26. been run.
  27. Total time to complete Offline
  28. data collection: ( 3608) seconds.
  29. Offline data collection
  30. capabilities: (0x5b) SMART execute Offline immediate.
  31. Auto Offline data collection on/off support.
  32. Suspend Offline collection upon new
  33. command.
  34. Offline surface scan supported.
  35. Self-test supported.
  36. No Conveyance Self-test supported.
  37. Selective Self-test supported.
  38. SMART capabilities: (0x0003) Saves SMART data before entering
  39. power-saving mode.
  40. Supports SMART auto save timer.
  41. Error logging capability: (0x01) Error logging supported.
  42. General Purpose Logging supported.
  43. Short self-test routine
  44. recommended polling time: ( 1) minutes.
  45. Extended self-test routine
  46. recommended polling time: ( 60) minutes.
  47. SCT capabilities: (0x003f) SCT Status supported.
  48. SCT Error Recovery Control supported.
  49. SCT Feature Control supported.
  50. SCT Data Table supported.
  51.  
  52. SMART Attributes Data Structure revision number: 16
  53. Vendor Specific SMART Attributes with Thresholds:
  54. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  55. 1 Raw_Read_Error_Rate 0x000f 253 098 051 Pre-fail Always - 0
  56. 3 Spin_Up_Time 0x0007 100 100 025 Pre-fail Always - 6144
  57. 4 Start_Stop_Count 0x0032 084 084 000 Old_age Always - 17096
  58. 5 Reallocated_Sector_Ct 0x0033 088 088 010 Pre-fail Always - 116
  59. 7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail Always - 0
  60. 8 Seek_Time_Performance 0x0025 253 253 015 Pre-fail Offline - 0
  61. 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 28777
  62. 10 Spin_Retry_Count 0x0033 253 253 051 Pre-fail Always - 0
  63. 11 Calibration_Retry_Count 0x0012 253 002 000 Old_age Always - 0
  64. 12 Power_Cycle_Count 0x0032 090 090 000 Old_age Always - 10285
  65. 190 Airflow_Temperature_Cel 0x0022 154 088 000 Old_age Always - 28
  66. 194 Temperature_Celsius 0x0022 154 088 000 Old_age Always - 28
  67. 195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 822
  68. 196 Reallocated_Event_Count 0x0032 088 088 000 Old_age Always - 116
  69. 197 Current_Pending_Sector 0x0012 253 097 000 Old_age Always - 0
  70. 198 Offline_Uncorrectable 0x0030 253 100 000 Old_age Offline - 0
  71. 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 1
  72. 200 Multi_Zone_Error_Rate 0x000a 253 100 000 Old_age Always - 0
  73. 201 Soft_Read_Error_Rate 0x000a 253 096 000 Old_age Always - 0
  74. 202 Data_Address_Mark_Errs 0x0032 100 100 000 Old_age Always - 6
  75.  
  76. SMART Error Log Version: 1
  77. ATA Error Count: 1013 (device log contains only the most recent five errors)
  78. CR = Command Register [HEX]
  79. FR = Features Register [HEX]
  80. SC = Sector Count Register [HEX]
  81. SN = Sector Number Register [HEX]
  82. CL = Cylinder Low Register [HEX]
  83. CH = Cylinder High Register [HEX]
  84. DH = Device/Head Register [HEX]
  85. DC = Device Command Register [HEX]
  86. ER = Error register [HEX]
  87. ST = Status register [HEX]
  88. Powered_Up_Time is measured from power on, and printed as
  89. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  90. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  91.  
  92. Error 1013 occurred at disk power-on lifetime: 24177 hours (1007 days + 9 hours)
  93. When the command that caused the error occurred, the device was active or idle.
  94.  
  95. After command completion occurred, registers were:
  96. ER ST SC SN CL CH DH
  97. -- -- -- -- -- -- --
  98. 40 51 08 38 ae 35 e5 Error: UNC 8 sectors at LBA = 0x0535ae38 = 87404088
  99.  
  100. Commands leading to the command that caused the error were:
  101. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  102. -- -- -- -- -- -- -- -- ---------------- --------------------
  103. c8 00 08 38 ae 35 e5 00 00:28:41.813 READ DMA
  104. ca 00 10 e0 25 2a e1 00 00:28:41.813 WRITE DMA
  105. ef 10 02 00 00 00 a0 00 00:28:41.813 SET FEATURES [Enable SATA feature]
  106. ec 00 00 00 00 00 a0 00 00:28:41.813 IDENTIFY DEVICE
  107. ef 03 46 00 00 00 a0 00 00:28:41.813 SET FEATURES [Set transfer mode]
  108.  
  109. Error 1012 occurred at disk power-on lifetime: 24177 hours (1007 days + 9 hours)
  110. When the command that caused the error occurred, the device was active or idle.
  111.  
  112. After command completion occurred, registers were:
  113. ER ST SC SN CL CH DH
  114. -- -- -- -- -- -- --
  115. 40 51 08 38 ae 35 e5 Error: UNC 8 sectors at LBA = 0x0535ae38 = 87404088
  116.  
  117. Commands leading to the command that caused the error were:
  118. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  119. -- -- -- -- -- -- -- -- ---------------- --------------------
  120. c8 00 08 38 ae 35 e5 00 00:28:39.875 READ DMA
  121. c8 00 08 d0 af 35 e5 00 00:28:39.875 READ DMA
  122. c8 00 08 c8 af 35 e5 00 00:28:39.875 READ DMA
  123. c8 00 08 c0 af 35 e5 00 00:28:39.875 READ DMA
  124. c8 00 08 b8 af 35 e5 00 00:28:39.875 READ DMA
  125.  
  126. Error 1011 occurred at disk power-on lifetime: 24177 hours (1007 days + 9 hours)
  127. When the command that caused the error occurred, the device was active or idle.
  128.  
  129. After command completion occurred, registers were:
  130. ER ST SC SN CL CH DH
  131. -- -- -- -- -- -- --
  132. 40 51 08 38 ae 35 e5 Error: UNC 8 sectors at LBA = 0x0535ae38 = 87404088
  133.  
  134. Commands leading to the command that caused the error were:
  135. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  136. -- -- -- -- -- -- -- -- ---------------- --------------------
  137. c8 00 08 38 ae 35 e5 00 00:28:38.000 READ DMA
  138. ef 10 02 00 00 00 a0 00 00:28:38.000 SET FEATURES [Enable SATA feature]
  139. ec 00 00 00 00 00 a0 00 00:28:38.000 IDENTIFY DEVICE
  140. ef 03 46 00 00 00 a0 00 00:28:38.000 SET FEATURES [Set transfer mode]
  141. ef 10 02 00 00 00 a0 00 00:28:38.000 SET FEATURES [Enable SATA feature]
  142.  
  143. Error 1010 occurred at disk power-on lifetime: 24177 hours (1007 days + 9 hours)
  144. When the command that caused the error occurred, the device was active or idle.
  145.  
  146. After command completion occurred, registers were:
  147. ER ST SC SN CL CH DH
  148. -- -- -- -- -- -- --
  149. 40 51 08 38 ae 35 e5 Error: UNC 8 sectors at LBA = 0x0535ae38 = 87404088
  150.  
  151. Commands leading to the command that caused the error were:
  152. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  153. -- -- -- -- -- -- -- -- ---------------- --------------------
  154. c8 00 08 38 ae 35 e5 00 00:28:36.063 READ DMA
  155. ef 90 03 00 00 00 a0 00 00:28:36.063 SET FEATURES [Disable SATA feature]
  156. ef 10 02 00 00 00 a0 00 00:28:36.063 SET FEATURES [Enable SATA feature]
  157. ec 00 00 00 00 00 a0 00 00:28:36.063 IDENTIFY DEVICE
  158. ef 03 46 00 00 00 a0 00 00:28:36.063 SET FEATURES [Set transfer mode]
  159.  
  160. Error 1009 occurred at disk power-on lifetime: 20727 hours (863 days + 15 hours)
  161. When the command that caused the error occurred, the device was active or idle.
  162.  
  163. After command completion occurred, registers were:
  164. ER ST SC SN CL CH DH
  165. -- -- -- -- -- -- --
  166. 40 51 a8 90 b1 35 e5 Error: UNC 168 sectors at LBA = 0x0535b190 = 87404944
  167.  
  168. Commands leading to the command that caused the error were:
  169. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  170. -- -- -- -- -- -- -- -- ---------------- --------------------
  171. c8 00 a8 90 b1 35 e5 00 11:45:02.750 READ DMA
  172. ec 00 00 00 00 00 a0 00 11:45:02.750 IDENTIFY DEVICE
  173. ef 03 46 00 00 00 a0 00 11:45:02.750 SET FEATURES [Set transfer mode]
  174. ec 00 00 00 00 00 a0 00 11:45:02.688 IDENTIFY DEVICE
  175. 00 00 01 01 00 00 a0 00 11:45:02.563 NOP [Abort queued commands]
  176.  
  177. SMART Self-test log structure revision number 1
  178. No self-tests have been logged. [To run self-tests, use: smartctl -t]
  179.  
  180. SMART Selective self-test log data structure revision number 0
  181. Note: revision number not 1 implies that no selective self-test has ever been run
  182. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  183. 1 0 0 Not_testing
  184. 2 0 0 Not_testing
  185. 3 0 0 Not_testing
  186. 4 0 0 Not_testing
  187. 5 0 0 Not_testing
  188. Selective self-test flags (0x0):
  189. After scanning selected spans, do NOT read-scan remainder of disk.
  190. If Selective self-test is pending on power-up, resume after 0 minute delay.
  191.  
  192. ===================================================================================
  193. smartctl 7.0 2018-12-30 r4883 [x86_64-linux-4.19.63-calculate] (local build)
  194. Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org
  195.  
  196. === START OF INFORMATION SECTION ===
  197. Model Family: Seagate Barracuda 7200.7 and 7200.7 Plus
  198. Device Model: ST3120827AS
  199. Serial Number: 4MT12ZBL
  200. Firmware Version: 3.42
  201. User Capacity: 120,034,123,776 bytes [120 GB]
  202. Sector Size: 512 bytes logical/physical
  203. Device is: In smartctl database [for details use: -P show]
  204. ATA Version is: ATA/ATAPI-6 T13/1410D revision 2
  205. Local Time is: Mon Sep 23 14:17:08 2019 MSK
  206. SMART support is: Available - device has SMART capability.
  207. SMART support is: Enabled
  208.  
  209. === START OF READ SMART DATA SECTION ===
  210. SMART overall-health self-assessment test result: PASSED
  211.  
  212. General SMART Values:
  213. Offline data collection status: (0x82) Offline data collection activity
  214. was completed without error.
  215. Auto Offline Data Collection: Enabled.
  216. Self-test execution status: ( 0) The previous self-test routine completed
  217. without error or no self-test has ever
  218. been run.
  219. Total time to complete Offline
  220. data collection: ( 430) seconds.
  221. Offline data collection
  222. capabilities: (0x5b) SMART execute Offline immediate.
  223. Auto Offline data collection on/off support.
  224. Suspend Offline collection upon new
  225. command.
  226. Offline surface scan supported.
  227. Self-test supported.
  228. No Conveyance Self-test supported.
  229. Selective Self-test supported.
  230. SMART capabilities: (0x0003) Saves SMART data before entering
  231. power-saving mode.
  232. Supports SMART auto save timer.
  233. Error logging capability: (0x01) Error logging supported.
  234. No General Purpose Logging support.
  235. Short self-test routine
  236. recommended polling time: ( 1) minutes.
  237. Extended self-test routine
  238. recommended polling time: ( 71) minutes.
  239.  
  240. SMART Attributes Data Structure revision number: 10
  241. Vendor Specific SMART Attributes with Thresholds:
  242. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  243. 1 Raw_Read_Error_Rate 0x000f 054 045 006 Pre-fail Always - 140435854
  244. 3 Spin_Up_Time 0x0003 096 096 000 Pre-fail Always - 0
  245. 4 Start_Stop_Count 0x0032 085 085 020 Old_age Always - 16359
  246. 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
  247. 7 Seek_Error_Rate 0x000f 084 060 030 Pre-fail Always - 257268705
  248. 9 Power_On_Hours 0x0032 074 074 000 Old_age Always - 22865
  249. 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
  250. 12 Power_Cycle_Count 0x0032 092 092 020 Old_age Always - 8616
  251. 194 Temperature_Celsius 0x0022 029 045 000 Old_age Always - 29 (0 5 0 0 0)
  252. 195 Hardware_ECC_Recovered 0x001a 054 045 000 Old_age Always - 140435854
  253. 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 1
  254. 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 1
  255. 199 UDMA_CRC_Error_Count 0x003e 200 199 000 Old_age Always - 2
  256. 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
  257. 202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0
  258.  
  259. SMART Error Log Version: 1
  260. ATA Error Count: 6994 (device log contains only the most recent five errors)
  261. CR = Command Register [HEX]
  262. FR = Features Register [HEX]
  263. SC = Sector Count Register [HEX]
  264. SN = Sector Number Register [HEX]
  265. CL = Cylinder Low Register [HEX]
  266. CH = Cylinder High Register [HEX]
  267. DH = Device/Head Register [HEX]
  268. DC = Device Command Register [HEX]
  269. ER = Error register [HEX]
  270. ST = Status register [HEX]
  271. Powered_Up_Time is measured from power on, and printed as
  272. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  273. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  274.  
  275. Error 6994 occurred at disk power-on lifetime: 9218 hours (384 days + 2 hours)
  276. When the command that caused the error occurred, the device was active or idle.
  277.  
  278. After command completion occurred, registers were:
  279. ER ST SC SN CL CH DH
  280. -- -- -- -- -- -- --
  281. 40 51 00 47 02 60 e0 Error: UNC at LBA = 0x00600247 = 6292039
  282.  
  283. Commands leading to the command that caused the error were:
  284. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  285. -- -- -- -- -- -- -- -- ---------------- --------------------
  286. c8 00 02 47 02 60 e0 00 01:08:35.015 READ DMA
  287. c8 00 02 45 02 60 e0 00 01:08:35.015 READ DMA
  288. c8 00 02 43 02 60 e0 00 01:08:35.015 READ DMA
  289. c8 00 01 00 00 00 e0 00 01:08:35.008 READ DMA
  290. c8 00 02 41 02 60 e0 00 01:08:35.002 READ DMA
  291.  
  292. Error 6993 occurred at disk power-on lifetime: 9218 hours (384 days + 2 hours)
  293. When the command that caused the error occurred, the device was active or idle.
  294.  
  295. After command completion occurred, registers were:
  296. ER ST SC SN CL CH DH
  297. -- -- -- -- -- -- --
  298. 40 51 08 47 02 60 e0 Error: UNC 8 sectors at LBA = 0x00600247 = 6292039
  299.  
  300. Commands leading to the command that caused the error were:
  301. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  302. -- -- -- -- -- -- -- -- ---------------- --------------------
  303. c8 00 00 3f 02 60 e0 00 01:08:31.119 READ DMA
  304. c8 00 02 5d 10 60 e0 00 01:08:31.107 READ DMA
  305. c8 00 00 3f 01 60 e0 00 01:08:31.106 READ DMA
  306. c8 00 00 3f 00 60 e0 00 01:08:31.102 READ DMA
  307. c8 00 02 4b 00 60 e0 00 01:08:31.101 READ DMA
  308.  
  309. Error 6992 occurred at disk power-on lifetime: 9216 hours (384 days + 0 hours)
  310. When the command that caused the error occurred, the device was active or idle.
  311.  
  312. After command completion occurred, registers were:
  313. ER ST SC SN CL CH DH
  314. -- -- -- -- -- -- --
  315. 40 51 11 40 46 2a e2 Error: UNC 17 sectors at LBA = 0x022a4640 = 36324928
  316.  
  317. Commands leading to the command that caused the error were:
  318. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  319. -- -- -- -- -- -- -- -- ---------------- --------------------
  320. c8 00 80 2f 46 2a e2 00 01:16:07.815 READ DMA
  321. c8 00 01 00 00 00 e0 00 01:16:07.815 READ DMA
  322. c8 00 80 2f 46 2a e2 00 01:16:07.814 READ DMA
  323. c8 00 01 00 00 00 e0 00 01:16:34.581 READ DMA
  324. c8 00 80 2f 46 2a e2 00 01:16:34.567 READ DMA
  325.  
  326. Error 6991 occurred at disk power-on lifetime: 9216 hours (384 days + 0 hours)
  327. When the command that caused the error occurred, the device was active or idle.
  328.  
  329. After command completion occurred, registers were:
  330. ER ST SC SN CL CH DH
  331. -- -- -- -- -- -- --
  332. 40 51 11 40 46 2a e2 Error: UNC 17 sectors at LBA = 0x022a4640 = 36324928
  333.  
  334. Commands leading to the command that caused the error were:
  335. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  336. -- -- -- -- -- -- -- -- ---------------- --------------------
  337. c8 00 80 2f 46 2a e2 00 01:16:07.815 READ DMA
  338. c8 00 01 00 00 00 e0 00 01:16:07.815 READ DMA
  339. c8 00 80 2f 46 2a e2 00 01:16:07.814 READ DMA
  340. ec 00 00 00 00 00 a0 00 01:16:07.804 IDENTIFY DEVICE
  341. c4 03 80 2f 46 2a e2 00 01:16:07.790 READ MULTIPLE
  342.  
  343. Error 6990 occurred at disk power-on lifetime: 9216 hours (384 days + 0 hours)
  344. When the command that caused the error occurred, the device was active or idle.
  345.  
  346. After command completion occurred, registers were:
  347. ER ST SC SN CL CH DH
  348. -- -- -- -- -- -- --
  349. 40 51 11 40 46 2a e2 Error: UNC 17 sectors at LBA = 0x022a4640 = 36324928
  350.  
  351. Commands leading to the command that caused the error were:
  352. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  353. -- -- -- -- -- -- -- -- ---------------- --------------------
  354. c8 00 80 2f 46 2a e2 00 01:16:07.815 READ DMA
  355. ec 00 00 00 00 00 a0 00 01:16:07.815 IDENTIFY DEVICE
  356. c4 03 80 2f 46 2a e2 00 01:16:07.814 READ MULTIPLE
  357. ef 03 45 01 10 00 a0 00 01:16:07.804 SET FEATURES [Set transfer mode]
  358. c6 00 10 01 00 00 a0 00 01:16:07.790 SET MULTIPLE MODE
  359.  
  360. SMART Self-test log structure revision number 1
  361. No self-tests have been logged. [To run self-tests, use: smartctl -t]
  362.  
  363. SMART Selective self-test log data structure revision number 1
  364. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  365. 1 0 0 Not_testing
  366. 2 0 0 Not_testing
  367. 3 0 0 Not_testing
  368. 4 0 0 Not_testing
  369. 5 0 0 Not_testing
  370. Selective self-test flags (0x0):
  371. After scanning selected spans, do NOT read-scan remainder of disk.
  372. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!