API tools faq
paste
Advertisement
smurfb

smartdata 3x ironwolf

smurfb
May 5th, 2024
190
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 17.19 KB | None | 0 0
raw download clone embed print report
  1. smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.8.0-31-generic] (local build)
  2. Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family: Seagate IronWolf Pro
  6. Device Model: ST14000NE0008-2RX103
  7. Serial Number: ZL2D7J98
  8. LU WWN Device Id: 5 000c50 0c89b0647
  9. Firmware Version: EN02
  10. User Capacity: 14,000,519,643,136 bytes [14.0 TB]
  11. Sector Sizes: 512 bytes logical, 4096 bytes physical
  12. Rotation Rate: 7200 rpm
  13. Form Factor: 3.5 inches
  14. Device is: In smartctl database 7.3/5528
  15. ATA Version is: ACS-4 (minor revision not indicated)
  16. SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
  17. Local Time is: Sun May 5 08:53:58 2024 UTC
  18. SMART support is: Available - device has SMART capability.
  19. SMART support is: Enabled
  20.  
  21. === START OF READ SMART DATA SECTION ===
  22. SMART overall-health self-assessment test result: PASSED
  23.  
  24. General SMART Values:
  25. Offline data collection status: (0x82) Offline data collection activity
  26. was completed without error.
  27. Auto Offline Data Collection: Enabled.
  28. Self-test execution status: ( 0) The previous self-test routine completed
  29. without error or no self-test has ever
  30. been run.
  31. Total time to complete Offline
  32. data collection: ( 567) seconds.
  33. Offline data collection
  34. capabilities: (0x7b) SMART execute Offline immediate.
  35. Auto Offline data collection on/off support.
  36. Suspend Offline collection upon new
  37. command.
  38. Offline surface scan supported.
  39. Self-test supported.
  40. Conveyance Self-test supported.
  41. Selective Self-test supported.
  42. SMART capabilities: (0x0003) Saves SMART data before entering
  43. power-saving mode.
  44. Supports SMART auto save timer.
  45. Error logging capability: (0x01) Error logging supported.
  46. General Purpose Logging supported.
  47. Short self-test routine
  48. recommended polling time: ( 1) minutes.
  49. Extended self-test routine
  50. recommended polling time: (1290) minutes.
  51. Conveyance self-test routine
  52. recommended polling time: ( 2) minutes.
  53. SCT capabilities: (0x50bd) SCT Status supported.
  54. SCT Error Recovery Control supported.
  55. SCT Feature Control supported.
  56. SCT Data Table supported.
  57.  
  58. SMART Attributes Data Structure revision number: 10
  59. Vendor Specific SMART Attributes with Thresholds:
  60. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  61. 1 Raw_Read_Error_Rate 0x000f 077 064 044 Pre-fail Always - 46253072
  62. 3 Spin_Up_Time 0x0003 090 088 000 Pre-fail Always - 0
  63. 4 Start_Stop_Count 0x0032 099 099 020 Old_age Always - 1501
  64. 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
  65. 7 Seek_Error_Rate 0x000f 088 060 045 Pre-fail Always - 688439768
  66. 9 Power_On_Hours 0x0032 073 073 000 Old_age Always - 23753
  67. 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
  68. 12 Power_Cycle_Count 0x0032 099 099 020 Old_age Always - 1504
  69. 18 Head_Health 0x000b 100 100 050 Pre-fail Always - 0
  70. 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
  71. 188 Command_Timeout 0x0032 100 099 000 Old_age Always - 489633742965
  72. 190 Airflow_Temperature_Cel 0x0022 071 044 040 Old_age Always - 29 (Min/Max 20/29)
  73. 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 1379
  74. 193 Load_Cycle_Count 0x0032 097 097 000 Old_age Always - 6748
  75. 194 Temperature_Celsius 0x0022 029 056 000 Old_age Always - 29 (0 11 0 0 0)
  76. 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
  77. 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
  78. 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
  79. 200 Pressure_Limit 0x0023 100 100 001 Pre-fail Always - 0
  80. 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 21644h+33m+31.423s
  81. 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 189699243671
  82. 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 1086574289565
  83.  
  84. SMART Error Log Version: 1
  85. No Errors Logged
  86.  
  87. SMART Self-test log structure revision number 1
  88. No self-tests have been logged. [To run self-tests, use: smartctl -t]
  89.  
  90. SMART Selective self-test log data structure revision number 1
  91. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  92. 1 0 0 Not_testing
  93. 2 0 0 Not_testing
  94. 3 0 0 Not_testing
  95. 4 0 0 Not_testing
  96. 5 0 0 Not_testing
  97. Selective self-test flags (0x0):
  98. After scanning selected spans, do NOT read-scan remainder of disk.
  99. If Selective self-test is pending on power-up, resume after 0 minute delay.
  100.  
  101. The above only provides legacy SMART information - try 'smartctl -x' for more
  102.  
  103.  
  104.  
  105. ---------------------------------------------------------------------------
  106.  
  107. === START OF INFORMATION SECTION ===
  108. Model Family: Seagate IronWolf Pro
  109. Device Model: ST14000NE0008-2RX103
  110. Serial Number: ZL2AVES1
  111. LU WWN Device Id: 5 000c50 0c7de8eb4
  112. Firmware Version: EN02
  113. User Capacity: 14,000,519,643,136 bytes [14.0 TB]
  114. Sector Sizes: 512 bytes logical, 4096 bytes physical
  115. Rotation Rate: 7200 rpm
  116. Form Factor: 3.5 inches
  117. Device is: In smartctl database 7.3/5528
  118. ATA Version is: ACS-4 (minor revision not indicated)
  119. SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
  120. Local Time is: Sun May 5 08:56:37 2024 UTC
  121. SMART support is: Available - device has SMART capability.
  122. SMART support is: Enabled
  123.  
  124. === START OF READ SMART DATA SECTION ===
  125. SMART overall-health self-assessment test result: PASSED
  126.  
  127. General SMART Values:
  128. Offline data collection status: (0x82) Offline data collection activity
  129. was completed without error.
  130. Auto Offline Data Collection: Enabled.
  131. Self-test execution status: ( 0) The previous self-test routine completed
  132. without error or no self-test has ever
  133. been run.
  134. Total time to complete Offline
  135. data collection: ( 567) seconds.
  136. Offline data collection
  137. capabilities: (0x7b) SMART execute Offline immediate.
  138. Auto Offline data collection on/off support.
  139. Suspend Offline collection upon new
  140. command.
  141. Offline surface scan supported.
  142. Self-test supported.
  143. Conveyance Self-test supported.
  144. Selective Self-test supported.
  145. SMART capabilities: (0x0003) Saves SMART data before entering
  146. power-saving mode.
  147. Supports SMART auto save timer.
  148. Error logging capability: (0x01) Error logging supported.
  149. General Purpose Logging supported.
  150. Short self-test routine
  151. recommended polling time: ( 1) minutes.
  152. Extended self-test routine
  153. recommended polling time: (1247) minutes.
  154. Conveyance self-test routine
  155. recommended polling time: ( 2) minutes.
  156. SCT capabilities: (0x50bd) SCT Status supported.
  157. SCT Error Recovery Control supported.
  158. SCT Feature Control supported.
  159. SCT Data Table supported.
  160.  
  161. SMART Attributes Data Structure revision number: 10
  162. Vendor Specific SMART Attributes with Thresholds:
  163. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  164. 1 Raw_Read_Error_Rate 0x000f 083 064 044 Pre-fail Always - 218224743
  165. 3 Spin_Up_Time 0x0003 091 087 000 Pre-fail Always - 0
  166. 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 547
  167. 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
  168. 7 Seek_Error_Rate 0x000f 083 060 045 Pre-fail Always - 178962910
  169. 9 Power_On_Hours 0x0032 075 075 000 Old_age Always - 22321
  170. 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
  171. 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 180
  172. 18 Head_Health 0x000b 100 100 050 Pre-fail Always - 0
  173. 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
  174. 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
  175. 190 Airflow_Temperature_Cel 0x0022 075 050 040 Old_age Always - 25 (Min/Max 25/25)
  176. 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 91
  177. 193 Load_Cycle_Count 0x0032 063 063 000 Old_age Always - 74326
  178. 194 Temperature_Celsius 0x0022 025 050 000 Old_age Always - 25 (0 11 0 0 0)
  179. 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
  180. 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
  181. 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 4
  182. 200 Pressure_Limit 0x0023 100 100 001 Pre-fail Always - 0
  183. 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 12496h+42m+14.822s
  184. 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 162603352618
  185. 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 162469732178
  186.  
  187. SMART Error Log Version: 1
  188. No Errors Logged
  189.  
  190. SMART Self-test log structure revision number 1
  191. No self-tests have been logged. [To run self-tests, use: smartctl -t]
  192.  
  193. SMART Selective self-test log data structure revision number 1
  194. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  195. 1 0 0 Not_testing
  196. 2 0 0 Not_testing
  197. 3 0 0 Not_testing
  198. 4 0 0 Not_testing
  199. 5 0 0 Not_testing
  200. Selective self-test flags (0x0):
  201. After scanning selected spans, do NOT read-scan remainder of disk.
  202. If Selective self-test is pending on power-up, resume after 0 minute delay.
  203.  
  204. ---------------------------------------------------------------------------------------------------------------
  205.  
  206.  
  207. === START OF INFORMATION SECTION ===
  208. Model Family: Seagate IronWolf Pro
  209. Device Model: ST14000NE0008-2RX103
  210. Serial Number: ZL2CNNKP
  211. LU WWN Device Id: 5 000c50 0c8e27869
  212. Firmware Version: EN02
  213. User Capacity: 14,000,519,643,136 bytes [14.0 TB]
  214. Sector Sizes: 512 bytes logical, 4096 bytes physical
  215. Rotation Rate: 7200 rpm
  216. Form Factor: 3.5 inches
  217. Device is: In smartctl database 7.3/5528
  218. ATA Version is: ACS-4 (minor revision not indicated)
  219. SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
  220. Local Time is: Sun May 5 09:03:17 2024 UTC
  221. SMART support is: Available - device has SMART capability.
  222. SMART support is: Enabled
  223.  
  224. === START OF READ SMART DATA SECTION ===
  225. SMART overall-health self-assessment test result: PASSED
  226.  
  227. General SMART Values:
  228. Offline data collection status: (0x82) Offline data collection activity
  229. was completed without error.
  230. Auto Offline Data Collection: Enabled.
  231. Self-test execution status: ( 0) The previous self-test routine completed
  232. without error or no self-test has ever
  233. been run.
  234. Total time to complete Offline
  235. data collection: ( 567) seconds.
  236. Offline data collection
  237. capabilities: (0x7b) SMART execute Offline immediate.
  238. Auto Offline data collection on/off support.
  239. Suspend Offline collection upon new
  240. command.
  241. Offline surface scan supported.
  242. Self-test supported.
  243. Conveyance Self-test supported.
  244. Selective Self-test supported.
  245. SMART capabilities: (0x0003) Saves SMART data before entering
  246. power-saving mode.
  247. Supports SMART auto save timer.
  248. Error logging capability: (0x01) Error logging supported.
  249. General Purpose Logging supported.
  250. Short self-test routine
  251. recommended polling time: ( 1) minutes.
  252. Extended self-test routine
  253. recommended polling time: (1290) minutes.
  254. Conveyance self-test routine
  255. recommended polling time: ( 2) minutes.
  256. SCT capabilities: (0x50bd) SCT Status supported.
  257. SCT Error Recovery Control supported.
  258. SCT Feature Control supported.
  259. SCT Data Table supported.
  260.  
  261. SMART Attributes Data Structure revision number: 10
  262. Vendor Specific SMART Attributes with Thresholds:
  263. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  264. 1 Raw_Read_Error_Rate 0x000f 081 064 044 Pre-fail Always - 113281642
  265. 3 Spin_Up_Time 0x0003 092 088 000 Pre-fail Always - 0
  266. 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 548
  267. 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
  268. 7 Seek_Error_Rate 0x000f 086 060 045 Pre-fail Always - 390970780
  269. 9 Power_On_Hours 0x0032 079 079 000 Old_age Always - 19057
  270. 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
  271. 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 551
  272. 18 Head_Health 0x000b 100 100 050 Pre-fail Always - 0
  273. 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
  274. 188 Command_Timeout 0x0032 100 099 000 Old_age Always - 2
  275. 190 Airflow_Temperature_Cel 0x0022 080 048 040 Old_age Always - 20 (Min/Max 20/20)
  276. 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 440
  277. 193 Load_Cycle_Count 0x0032 089 089 000 Old_age Always - 23227
  278. 194 Temperature_Celsius 0x0022 020 052 000 Old_age Always - 20 (0 12 0 0 0)
  279. 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
  280. 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
  281. 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
  282. 200 Pressure_Limit 0x0023 100 100 001 Pre-fail Always - 0
  283. 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 15466h+56m+07.352s
  284. 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 178337002654
  285. 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 557170638952
  286.  
  287. SMART Error Log Version: 1
  288. No Errors Logged
  289.  
  290. SMART Self-test log structure revision number 1
  291. No self-tests have been logged. [To run self-tests, use: smartctl -t]
  292.  
  293. SMART Selective self-test log data structure revision number 1
  294. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  295. 1 0 0 Not_testing
  296. 2 0 0 Not_testing
  297. 3 0 0 Not_testing
  298. 4 0 0 Not_testing
  299. 5 0 0 Not_testing
  300. Selective self-test flags (0x0):
  301. After scanning selected spans, do NOT read-scan remainder of disk.
  302. If Selective self-test is pending on power-up, resume after 0 minute delay.
  303.  
  304.  
  305.  
  306.  
  307.  
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!