Advertisement
Pteridium

Untitled

Jan 14th, 2013
202
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. ROM VER: 1.0.3
  2. CFG 01
  3. Read EEPROMX
  4. X
  5.  
  6.  
  7.  
  8.  
  9. =======================================================================
  10.  
  11. Wireless ADSL Gateway DANUBE Loader 64M-V0.02 build Nov 22 2007 17:32:23
  12.  
  13. Arcadyan Technology Corporation
  14.  
  15. =======================================================================
  16.  
  17. EON EN29LV320B bottom boot 16-bit mode found
  18.  
  19.  
  20. Copying boot params.....DONE
  21.  
  22.  
  23.  
  24. Press Space Bar 3 times to enter command mode ...
  25.  
  26. Flash Checking - fw/ui... Passed.
  27.  
  28.  
  29. Image[1] at 0xb0060000, len:987697, type:255
  30.  
  31. Firmware image at -1, ART image at -1
  32.  
  33.  
  34. Run-up Normal Firmware...
  35.  
  36.  
  37. Unzipping firmware at 0x80002000 ... [ZIP 1] done
  38.  
  39. Run-time code running ...
  40.  
  41.  
  42. Ready to run firmware
  43.  
  44. [ 0.000000] Linux version 3.3.8 (pepe@debian) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #6 Sat Jan 12 17:15:19 CET 2013
  45. [ 0.000000] SoC: Danube rev 1.3
  46. [ 0.000000] bootconsole [early0] enabled
  47. [ 0.000000] CPU revision is: 00019641 (MIPS 24KEc)
  48.  
  49. [ 0.000000] Found BRN-BOOT instead of u-boot
  50.  
  51. [ 0.000000] Determined physical RAM map:
  52. [ 0.000000] memory: 04000000 @ 00000000 (usable)
  53. [ 0.000000] Initrd not found or empty - disabling initrd
  54. [ 0.000000] Kernel command line: console=ttyLTQ1,115200 rootfstype=squashfs,jffs2 machtype=ARV4518PW
  55. [ 0.000000] PID hash table entries: 256 (order: -4, 1024 bytes)
  56. [ 0.000000] Dentry cache hash table entries: 8192 (order: 1, 32768 bytes)
  57. [ 0.000000] Inode-cache hash table entries: 4096 (order: 0, 16384 bytes)
  58. [ 0.000000] Writing ErrCtl register=00034528
  59. [ 0.000000] Readback ErrCtl register=00034528
  60. [ 0.000000] Memory: 62016k/65536k available (2315k kernel code, 3520k reserved, 424k data, 176k init, 0k highmem)
  61. [ 0.000000] SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  62. [ 0.000000] NR_IRQS:256
  63. [ 0.000000] CPU Clock: 333MHz
  64. [ 0.000000] Calibrating delay loop... 221.18 BogoMIPS (lpj=442368)
  65. [ 0.036000] pid_max: default: 32768 minimum: 301
  66. [ 0.040000] Mount-cache hash table entries: 2048
  67. [ 0.052000] NET: Registered protocol family 16
  68. [ 0.060000] gpiochip_add: registered GPIOs 0 to 15 on device: ltq_gpio
  69. [ 0.064000] gpiochip_add: registered GPIOs 16 to 31 on device: ltq_gpio
  70. [ 0.068000] MIPS: machine is ARV4518PW - SMC7908A-ISP, Airties WAV-221
  71. [ 0.072000] gpiochip_add: registered GPIOs 100 to 115 on device: ltq_ebu
  72. [ 0.084000] DMA-API: debugging out of memory - disabling
  73. [ 0.104000] bio: create slab <bio-0> at 0
  74. [ 0.112000] PCI host bridge to bus 0000:00
  75. [ 0.116000] pci_bus 0000:00: root bus resource [mem 0x18000000-0x19ffffff]
  76. [ 0.120000] pci_bus 0000:00: root bus resource [io 0x1ae00000-0x1affffff]
  77. [ 0.124000] pci 0000:00:0e.0: BAR 0: assigned [mem 0x18000000-0x1800ffff]
  78. [ 0.128000] pci 0000:00:0e.0: SLOT:14 PIN:1 IRQ:30
  79. [ 0.132000] Switching to clocksource MIPS
  80. [ 0.140000] NET: Registered protocol family 2
  81. [ 0.148000] IP route cache hash table entries: 4096 (order: 0, 16384 bytes)
  82. [ 0.152000] TCP established hash table entries: 2048 (order: 0, 16384 bytes)
  83. [ 0.160000] TCP bind hash table entries: 2048 (order: -1, 8192 bytes)
  84. [ 0.168000] TCP: Hash tables configured (established 2048 bind 2048)
  85. [ 0.172000] TCP reno registered
  86. [ 0.176000] UDP hash table entries: 1024 (order: 0, 16384 bytes)
  87. [ 0.184000] UDP-Lite hash table entries: 1024 (order: 0, 16384 bytes)
  88. [ 0.188000] NET: Registered protocol family 1
  89. [ 0.196000] gptu: totally 6 16-bit timers/counters
  90. [ 0.200000] gptu: misc_register on minor 63
  91. [ 0.204000] gptu: succeeded to request irq 126
  92. [ 0.208000] gptu: succeeded to request irq 127
  93. [ 0.212000] gptu: succeeded to request irq 128
  94. [ 0.216000] gptu: succeeded to request irq 129
  95. [ 0.224000] gptu: succeeded to request irq 130
  96. [ 0.228000] gptu: succeeded to request irq 131
  97. [ 0.272000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  98. [ 0.276000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  99. [ 0.288000] msgmni has been set to 121
  100. [ 0.292000] io scheduler noop registered
  101. [ 0.296000] io scheduler cfq registered (default)
  102. [ 0.304000] ltq_asc.1: ttyLTQ1 at MMIO 0x1e100c00 (irq = 112) is a ltq_asc
  103. [ 0.308000] console [ttyLTQ1] enabled, bootconsole disabled
  104. [ 0.308000] console [ttyLTQ1] enabled, bootconsole disabled
  105. [ 0.324000] ltq_nor: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x00007f Chip ID 0x0022f9
  106. [ 0.332000] Amd/Fujitsu Extended Query Table at 0x0040
  107. [ 0.336000] Amd/Fujitsu Extended Query version 1.1.
  108. [ 0.344000] number of CFI chips: 1
  109. [ 0.344000] Creating 5 MTD partitions on "ltq_nor":
  110. [ 0.352000] 0x000000000000-0x000000020000 : "brn-boot"
  111. [ 0.360000] 0x000000020000-0x000000050000 : "config"
  112. [ 0.364000] 0x000000050000-0x0000003e0000 : "linux"
  113. [ 0.436000] no uImage or brnImage or eva found in linux partition
  114. [ 0.440000] Can't split linux partition
  115. [ 0.444000] 0x0000003e0000-0x0000003f0000 : "reserved"
  116. [ 0.452000] 0x0000003f0000-0x000000400000 : "eeprom"
  117. [ 0.476000] ltq_mii: probed
  118. [ 0.508000] Registering RTL8306SD switch with Chip ID: 0x5988, version: 0x0000
  119. [ 0.512000] eth0: attached PHY [Realtek RTL8306S] (phy_addr=ltq_etop-fffffff:00, irq=-1)
  120. [ 0.536000] TCP cubic registered
  121. [ 0.536000] NET: Registered protocol family 17
  122. [ 0.540000] 8021q: 802.1Q VLAN Support
  123. [ 0.544000] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement