View difference between Paste ID: wcJF1Rfv and jresNSCN

 ROM VER: 1.0.3
 CFG 01
-Read\0xe0
+
  X
 
 
 
 
 =======================================================================
 
 Wireless ADSL Gateway DANUBE Loader 64M-V0.02 build Nov 22 2007 17:32:23
 
                     Arcadyan Technology Corporation
 
 =======================================================================
 
 EON EN29LV320B bottom boot 16-bit mode found
 
 
 Copying boot params.....DONE
 
 
 
 Press Space Bar 3 times to enter command mode ...
 
 Flash Checking - fw/ui...  Passed.
 
 
 Image[1] at 0xb0060000, len:987697, type:255
 
 Firmware image at -1, ART image at -1
 
 
 Run-up Normal Firmware...
 
 
 Unzipping firmware at 0x80002000 ... [ZIP 1]  done
 
 Run-time code running ...
 
 
 Ready to run firmware
 
 [    0.000000] Linux version 3.3.8 (pepe@debian) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #6 Sat Jan 12 17:15:19 CET 2013
 [    0.000000] SoC: Danube rev 1.3
 [    0.000000] bootconsole [early0] enabled
 [    0.000000] CPU revision is: 00019641 (MIPS 24KEc)
 
 [    0.000000] Found BRN-BOOT instead of u-boot
 
 [    0.000000] Determined physical RAM map:
 [    0.000000]  memory: 04000000 @ 00000000 (usable)
 [    0.000000] Initrd not found or empty - disabling initrd
 [    0.000000] Kernel command line: console=ttyLTQ1,115200 rootfstype=squashfs,jffs2 machtype=ARV4518PW
 [    0.000000] PID hash table entries: 256 (order: -4, 1024 bytes)
 [    0.000000] Dentry cache hash table entries: 8192 (order: 1, 32768 bytes)
 [    0.000000] Inode-cache hash table entries: 4096 (order: 0, 16384 bytes)
 [    0.000000] Writing ErrCtl register=00034528
 [    0.000000] Readback ErrCtl register=00034528
 [    0.000000] Memory: 62016k/65536k available (2315k kernel code, 3520k reserved, 424k data, 176k init, 0k highmem)
 [    0.000000] SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
 [    0.000000] NR_IRQS:256
 [    0.000000] CPU Clock: 333MHz
 [    0.000000] Calibrating delay loop... 221.18 BogoMIPS (lpj=442368)
 [    0.036000] pid_max: default: 32768 minimum: 301
 [    0.040000] Mount-cache hash table entries: 2048
 [    0.052000] NET: Registered protocol family 16
 [    0.060000] gpiochip_add: registered GPIOs 0 to 15 on device: ltq_gpio
 [    0.064000] gpiochip_add: registered GPIOs 16 to 31 on device: ltq_gpio
 [    0.068000] MIPS: machine is ARV4518PW - SMC7908A-ISP, Airties WAV-221
 [    0.072000] gpiochip_add: registered GPIOs 100 to 115 on device: ltq_ebu
 [    0.084000] DMA-API: debugging out of memory - disabling
 [    0.104000] bio: create slab <bio-0> at 0
 [    0.112000] PCI host bridge to bus 0000:00
 [    0.116000] pci_bus 0000:00: root bus resource [mem 0x18000000-0x19ffffff]
 [    0.120000] pci_bus 0000:00: root bus resource [io  0x1ae00000-0x1affffff]
 [    0.124000] pci 0000:00:0e.0: BAR 0: assigned [mem 0x18000000-0x1800ffff]
 [    0.128000] pci 0000:00:0e.0: SLOT:14 PIN:1 IRQ:30
 [    0.132000] Switching to clocksource MIPS
 [    0.140000] NET: Registered protocol family 2
 [    0.148000] IP route cache hash table entries: 4096 (order: 0, 16384 bytes)
 [    0.152000] TCP established hash table entries: 2048 (order: 0, 16384 bytes)
 [    0.160000] TCP bind hash table entries: 2048 (order: -1, 8192 bytes)
 [    0.168000] TCP: Hash tables configured (established 2048 bind 2048)
 [    0.172000] TCP reno registered
 [    0.176000] UDP hash table entries: 1024 (order: 0, 16384 bytes)
 [    0.184000] UDP-Lite hash table entries: 1024 (order: 0, 16384 bytes)
 [    0.188000] NET: Registered protocol family 1
 [    0.196000] gptu: totally 6 16-bit timers/counters
 [    0.200000] gptu: misc_register on minor 63
 [    0.204000] gptu: succeeded to request irq 126
 [    0.208000] gptu: succeeded to request irq 127
 [    0.212000] gptu: succeeded to request irq 128
 [    0.216000] gptu: succeeded to request irq 129
 [    0.224000] gptu: succeeded to request irq 130
 [    0.228000] gptu: succeeded to request irq 131
 [    0.272000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
 [    0.276000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
 [    0.288000] msgmni has been set to 121
 [    0.292000] io scheduler noop registered
 [    0.296000] io scheduler cfq registered (default)
 [    0.304000] ltq_asc.1: ttyLTQ1 at MMIO 0x1e100c00 (irq = 112) is a ltq_asc
 [    0.308000] console [ttyLTQ1] enabled, bootconsole disabled
 [    0.308000] console [ttyLTQ1] enabled, bootconsole disabled
 [    0.324000] ltq_nor: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x00007f Chip ID 0x0022f9
 [    0.332000] Amd/Fujitsu Extended Query Table at 0x0040
 [    0.336000]   Amd/Fujitsu Extended Query version 1.1.
 [    0.344000] number of CFI chips: 1
 [    0.344000] Creating 5 MTD partitions on "ltq_nor":
 [    0.352000] 0x000000000000-0x000000020000 : "brn-boot"
 [    0.360000] 0x000000020000-0x000000050000 : "config"
 [    0.364000] 0x000000050000-0x0000003e0000 : "linux"
 [    0.436000] no uImage or brnImage or eva found in linux partition
 [    0.440000] Can't split linux partition
 [    0.444000] 0x0000003e0000-0x0000003f0000 : "reserved"
 [    0.452000] 0x0000003f0000-0x000000400000 : "eeprom"
 [    0.476000] ltq_mii: probed
 [    0.508000] Registering RTL8306SD switch with Chip ID: 0x5988, version: 0x0000
 [    0.512000] eth0: attached PHY [Realtek RTL8306S] (phy_addr=ltq_etop-fffffff:00, irq=-1)
 [    0.536000] TCP cubic registered
 [    0.536000] NET: Registered protocol family 17
 [    0.540000] 8021q: 802.1Q VLAN Support
 [    0.544000] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)