daily pastebin goal
12%
SHARE
TWEET

smartctl 17-11-13

Battosai94 Nov 17th, 2013 33 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. smartctl 6.2 2013-04-20 r3812 [x86_64-linux-3.11.0-12-generic] (local build)
  2. Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family:     Western Digital Scorpio Blue Serial ATA
  6. Device Model:     WDC WD3200BEVT-22ZCT0
  7. Serial Number:    WD-WXE308P51203
  8. LU WWN Device Id: 5 0014ee 2ac0b78e3
  9. Firmware Version: 11.01A11
  10. User Capacity:    320,072,933,376 bytes [320 GB]
  11. Sector Size:      512 bytes logical/physical
  12. Rotation Rate:    5400 rpm
  13. Device is:        In smartctl database [for details use: -P show]
  14. ATA Version is:   ATA8-ACS (minor revision not indicated)
  15. SATA Version is:  SATA 2.5, 1.5 Gb/s
  16. Local Time is:    Sun Nov 17 14:08:41 2013 UTC
  17. SMART support is: Available - device has SMART capability.
  18. SMART support is: Enabled
  19.  
  20. === START OF READ SMART DATA SECTION ===
  21. SMART overall-health self-assessment test result: PASSED
  22.  
  23. General SMART Values:
  24. Offline data collection status:  (0x00) Offline data collection activity
  25.                                         was never started.
  26.                                         Auto Offline Data Collection: Disabled.
  27. Self-test execution status:      ( 121) The previous self-test completed having
  28.                                         the read element of the test failed.
  29. Total time to complete Offline
  30. data collection:                (10800) seconds.
  31. Offline data collection
  32. capabilities:                    (0x7b) SMART execute Offline immediate.
  33.                                         Auto Offline data collection on/off support.
  34.                                         Suspend Offline collection upon new
  35.                                         command.
  36.                                         Offline surface scan supported.
  37.                                         Self-test supported.
  38.                                         Conveyance Self-test supported.
  39.                                         Selective Self-test supported.
  40. SMART capabilities:            (0x0003) Saves SMART data before entering
  41.                                         power-saving mode.
  42.                                         Supports SMART auto save timer.
  43. Error logging capability:        (0x01) Error logging supported.
  44.                                         General Purpose Logging supported.
  45. Short self-test routine
  46. recommended polling time:        (   2) minutes.
  47. Extended self-test routine
  48. recommended polling time:        ( 127) minutes.
  49. Conveyance self-test routine
  50. recommended polling time:        (   5) minutes.
  51. SCT capabilities:              (0x303f) SCT Status supported.
  52.                                         SCT Error Recovery Control supported.
  53.                                         SCT Feature Control supported.
  54.                                         SCT Data Table supported.
  55.  
  56. SMART Attributes Data Structure revision number: 16
  57. Vendor Specific SMART Attributes with Thresholds:
  58. ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  59.   1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       963
  60.   3 Spin_Up_Time            0x0027   193   186   021    Pre-fail  Always       -       1341
  61.   4 Start_Stop_Count        0x0032   096   096   000    Old_age   Always       -       4915
  62.   5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  63.   7 Seek_Error_Rate         0x002e   100   253   051    Old_age   Always       -       0
  64.   9 Power_On_Hours          0x0032   070   070   000    Old_age   Always       -       22093
  65.  10 Spin_Retry_Count        0x0033   100   098   051    Pre-fail  Always       -       0
  66.  11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       0
  67.  12 Power_Cycle_Count       0x0032   096   096   000    Old_age   Always       -       4225
  68. 192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       566
  69. 193 Load_Cycle_Count        0x0032   129   129   000    Old_age   Always       -       215661
  70. 194 Temperature_Celsius     0x0022   105   074   000    Old_age   Always       -       42
  71. 196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
  72. 197 Current_Pending_Sector  0x0032   199   199   000    Old_age   Always       -       75
  73. 198 Offline_Uncorrectable   0x0030   100   253   000    Old_age   Offline      -       0
  74. 199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
  75. 200 Multi_Zone_Error_Rate   0x0009   100   253   051    Pre-fail  Offline      -       0
  76.  
  77. SMART Error Log Version: 1
  78. ATA Error Count: 5124 (device log contains only the most recent five errors)
  79.         CR = Command Register [HEX]
  80.         FR = Features Register [HEX]
  81.         SC = Sector Count Register [HEX]
  82.         SN = Sector Number Register [HEX]
  83.         CL = Cylinder Low Register [HEX]
  84.         CH = Cylinder High Register [HEX]
  85.         DH = Device/Head Register [HEX]
  86.         DC = Device Command Register [HEX]
  87.         ER = Error register [HEX]
  88.         ST = Status register [HEX]
  89. Powered_Up_Time is measured from power on, and printed as
  90. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  91. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  92.  
  93. Error 5124 occurred at disk power-on lifetime: 22093 hours (920 days + 13 hours)
  94.   When the command that caused the error occurred, the device was active or idle.
  95.  
  96.   After command completion occurred, registers were:
  97.   ER ST SC SN CL CH DH
  98.   -- -- -- -- -- -- --
  99.   40 51 00 00 00 00 e0  Error: UNC at LBA = 0x00000000 = 0
  100.  
  101.   Commands leading to the command that caused the error were:
  102.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  103.   -- -- -- -- -- -- -- --  ----------------  --------------------
  104.   c8 00 08 00 00 00 00 00      01:21:34.150  READ DMA
  105.   ef 10 02 00 00 00 00 00      01:21:34.150  SET FEATURES [Enable SATA feature]
  106.   27 00 00 00 00 00 00 00      01:21:34.149  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  107.   ec 00 00 00 00 00 00 00      01:21:34.149  IDENTIFY DEVICE
  108.   ef 03 42 00 00 00 00 00      01:21:34.149  SET FEATURES [Set transfer mode]
  109.  
  110. Error 5123 occurred at disk power-on lifetime: 22093 hours (920 days + 13 hours)
  111.   When the command that caused the error occurred, the device was active or idle.
  112.  
  113.   After command completion occurred, registers were:
  114.   ER ST SC SN CL CH DH
  115.   -- -- -- -- -- -- --
  116.   40 51 00 00 00 00 e0  Error: UNC at LBA = 0x00000000 = 0
  117.  
  118.   Commands leading to the command that caused the error were:
  119.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  120.   -- -- -- -- -- -- -- --  ----------------  --------------------
  121.   c8 00 20 00 00 00 00 00      01:21:31.202  READ DMA
  122.   ef 10 02 00 00 00 00 00      01:21:31.202  SET FEATURES [Enable SATA feature]
  123.   27 00 00 00 00 00 00 00      01:21:31.202  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  124.   ec 00 00 00 00 00 00 00      01:21:31.201  IDENTIFY DEVICE
  125.   ef 03 42 00 00 00 00 00      01:21:31.201  SET FEATURES [Set transfer mode]
  126.  
  127. Error 5122 occurred at disk power-on lifetime: 22093 hours (920 days + 13 hours)
  128.   When the command that caused the error occurred, the device was active or idle.
  129.  
  130.   After command completion occurred, registers were:
  131.   ER ST SC SN CL CH DH
  132.   -- -- -- -- -- -- --
  133.   01 51 00 00 00 00 e0  Error: AMNF at LBA = 0x00000000 = 0
  134.  
  135.   Commands leading to the command that caused the error were:
  136.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  137.   -- -- -- -- -- -- -- --  ----------------  --------------------
  138.   c8 00 20 00 00 00 00 00      01:21:28.107  READ DMA
  139.   ef 10 02 00 00 00 00 00      01:21:28.107  SET FEATURES [Enable SATA feature]
  140.   27 00 00 00 00 00 00 00      01:21:28.107  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  141.   ec 00 00 00 00 00 00 00      01:21:28.106  IDENTIFY DEVICE
  142.   ef 03 42 00 00 00 00 00      01:21:28.106  SET FEATURES [Set transfer mode]
  143.  
  144. Error 5121 occurred at disk power-on lifetime: 22093 hours (920 days + 13 hours)
  145.   When the command that caused the error occurred, the device was active or idle.
  146.  
  147.   After command completion occurred, registers were:
  148.   ER ST SC SN CL CH DH
  149.   -- -- -- -- -- -- --
  150.   01 51 00 00 00 00 e0  Error: AMNF at LBA = 0x00000000 = 0
  151.  
  152.   Commands leading to the command that caused the error were:
  153.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  154.   -- -- -- -- -- -- -- --  ----------------  --------------------
  155.   c8 00 20 00 00 00 00 00      01:21:25.014  READ DMA
  156.   25 00 08 a8 ea 42 25 00      01:21:25.014  READ DMA EXT
  157.   ef 10 02 00 00 00 00 00      01:21:25.014  SET FEATURES [Enable SATA feature]
  158.   27 00 00 00 00 00 00 00      01:21:25.013  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  159.   ec 00 00 00 00 00 00 00      01:21:25.013  IDENTIFY DEVICE
  160.  
  161. Error 5120 occurred at disk power-on lifetime: 22093 hours (920 days + 13 hours)
  162.   When the command that caused the error occurred, the device was active or idle.
  163.  
  164.   After command completion occurred, registers were:
  165.   ER ST SC SN CL CH DH
  166.   -- -- -- -- -- -- --
  167.   40 51 00 00 00 00 e0  Error: UNC at LBA = 0x00000000 = 0
  168.  
  169.   Commands leading to the command that caused the error were:
  170.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  171.   -- -- -- -- -- -- -- --  ----------------  --------------------
  172.   c8 00 08 00 00 00 00 00      01:21:21.767  READ DMA
  173.   ef 10 02 00 00 00 00 00      01:21:21.767  SET FEATURES [Enable SATA feature]
  174.   27 00 00 00 00 00 00 00      01:21:21.767  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  175.   ec 00 00 00 00 00 00 00      01:21:21.766  IDENTIFY DEVICE
  176.   ef 03 42 00 00 00 00 00      01:21:21.766  SET FEATURES [Set transfer mode]
  177.  
  178. SMART Self-test log structure revision number 1
  179. Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
  180. # 1  Short offline       Completed: read failure       90%     22093         0
  181. # 2  Short offline       Completed: read failure       90%     22093         0
  182. # 3  Short offline       Completed: read failure       90%     22093         0
  183. # 4  Extended offline    Completed: read failure       90%     22093         0
  184.  
  185. SMART Selective self-test log data structure revision number 1
  186.  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
  187.     1        0        0  Not_testing
  188.     2        0        0  Not_testing
  189.     3        0        0  Not_testing
  190.     4        0        0  Not_testing
  191.     5        0        0  Not_testing
  192. Selective self-test flags (0x0):
  193.   After scanning selected spans, do NOT read-scan remainder of disk.
  194. If Selective self-test is pending on power-up, resume after 0 minute delay.
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top