API tools faq
paste
B1gtuna

Dora Overo Kernel Panic not syncing: VFS

B1gtuna
Jan 27th, 2014
140
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 10.32 KB | None | 0 0
raw download clone embed print report
  1. Restarting system.
  2. �tذb�$U
  3. @ @ @D��` @ @
  4. U-Boot SPL 2013.10 (Dec 19 2013 - 14:56:41)
  5. reading u-boot.img
  6. reading u-boot.img
  7.  
  8.  
  9. U-Boot 2013.10 (Dec 19 2013 - 14:56:41)
  10.  
  11. OMAP36XX/37XX-GP ES1.2, CPU-OPP2, L3-200MHz, Max CPU Clock 1 Ghz
  12. Gumstix Overo board + LPDDR/NAND
  13. I2C: ready
  14. DRAM: 512 MiB
  15. NAND: 512 MiB
  16. MMC: OMAP SD/MMC: 0
  17. *** Warning - bad CRC, using default environment
  18.  
  19. In: serial
  20. Out: serial
  21. Err: serial
  22. Board revision: 1
  23. Tranceiver detected on mmc2
  24. No EEPROM on expansion board
  25. Die ID #245e00029ff800000168300f18022002
  26. Net: smc911x-0
  27. Warning: smc911x-0 using MAC address from net device
  28.  
  29. Hit any key to stop autoboot: 0
  30. mmc0 is current device
  31. reading boot.scr
  32. ** Unable to read file boot.scr **
  33. reading uEnv.txt
  34. ** Unable to read file uEnv.txt **
  35. reading uImage
  36. 3360760 bytes read in 213 ms (15 MiB/s)
  37. Booting from mmc ...
  38. ## Booting kernel from Legacy Image at 82000000 ...
  39. Image Name: Linux-3.2.0+
  40. Image Type: ARM Linux Kernel Image (uncompressed)
  41. Data Size: 3360696 Bytes = 3.2 MiB
  42. Load Address: 80008000
  43. Entry Point: 80008000
  44. Verifying Checksum ... OK
  45. Loading Kernel Image ... OK
  46.  
  47. Starting kernel ...
  48.  
  49. Uncompressing Linux... done, booting the kernel.
  50. Initializing cgroup subsys cpuset
  51. Initializing cgroup subsys cpu
  52. Linux version 3.2.0+ (ash@gumstux) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-1ubuntu1) ) #19 PREEMPT Wed Jan 22 15:38:11 PST 2014
  53. CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7d
  54. CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  55. Machine: Gumstix Overo
  56. Reserving 12582912 bytes SDRAM for VRAM
  57. Memory policy: ECC disabled, Data cache writeback
  58. OMAP3630 ES1.2 (l2cache neon isp 192mhz_clk )
  59. Clocking rate (Crystal/Core/MPU): 26.0/400/600 MHz
  60. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 126976
  61. Kernel command line: console=ttyO2,115200n8 mpurate=500 vram=12M omapfb.mode=dvi:1024x768MR-16@60 omapdss.def_disp=dvi root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait
  62. PID hash table entries: 2048 (order: 1, 8192 bytes)
  63. Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  64. Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  65. allocated 2097152 bytes of page_cgroup
  66. please try 'cgroup_disable=memory' option if you don't want memory cgroups
  67. Memory: 500MB = 500MB total
  68. Memory: 497964k/497964k available, 26324k reserved, 0K highmem
  69. Virtual kernel memory layout:
  70. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  71. fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  72. vmalloc : 0xe0800000 - 0xf8000000 ( 376 MB)
  73. lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
  74. pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  75. modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  76. .text : 0xc0008000 - 0xc0629f04 (6280 kB)
  77. .init : 0xc062a000 - 0xc065f000 ( 212 kB)
  78. .data : 0xc0660000 - 0xc06b9e40 ( 360 kB)
  79. .bss : 0xc06b9e64 - 0xc0746fe4 ( 565 kB)
  80. NR_IRQS:410
  81. IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
  82. Total of 96 interrupts on 1 active controller
  83. OMAP clockevent source: GPTIMER1 at 32768 Hz
  84. sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
  85. Console: colour dummy device 80x30
  86. Calibrating delay loop... 597.64 BogoMIPS (lpj=2334720)
  87. pid_max: default: 32768 minimum: 301
  88. Mount-cache hash table entries: 512
  89. Initializing cgroup subsys debug
  90. Initializing cgroup subsys cpuacct
  91. Initializing cgroup subsys memory
  92. Initializing cgroup subsys devices
  93. Initializing cgroup subsys freezer
  94. Initializing cgroup subsys perf_event
  95. CPU: Testing write buffer coherency: ok
  96. devtmpfs: initialized
  97. print_constraints: dummy:
  98. NET: Registered protocol family 16
  99. GPMC revision 5.0
  100. OMAP GPIO hardware version 2.5
  101. omap_mux_init: Add partition: #1: core, flags: 0
  102. Reprogramming SDRC clock to 400000000 Hz
  103. dpll3_m2_clk rate change failed: -22
  104. Found NAND on CS0
  105. Registering NAND on CS0
  106. hw-breakpoint: debug architecture 0x4 unsupported.
  107. omap-mcbsp.2: alias fck already exists
  108. omap-mcbsp.3: alias fck already exists
  109. Calibrating delay loop (skipped) already calibrated this CPU
  110. Switched to new clocking rate (Crystal/Core/MPU): 26.0/400/500 MHz
  111. OMAP DMA hardware revision 5.0
  112. bio: create slab <bio-0> at 0
  113. SCSI subsystem initialized
  114. usbcore: registered new interface driver usbfs
  115. usbcore: registered new interface driver hub
  116. usbcore: registered new device driver usb
  117. omap_i2c omap_i2c.1: bus 1 rev1.4.0 at 2600 kHz
  118. twl4030: PIH (irq 7) chaining IRQs 368..375
  119. twl4030: power (irq 373) chaining IRQs 376..383
  120. twl4030: gpio (irq 368) chaining IRQs 384..401
  121. print_constraints: VUSB1V5: 1500 mV normal standby
  122. print_constraints: VUSB1V8: 1800 mV normal standby
  123. print_constraints: VUSB3V1: 3100 mV normal standby
  124. twl4030_usb twl4030_usb: Initialized TWL4030 USB module
  125. print_constraints: VMMC1: 1850 <--> 3150 mV at 3150 mV normal standby
  126. print_constraints: VDAC: 1800 mV normal standby
  127. print_constraints: VDVI: 1800 mV normal standby
  128. omap_i2c omap_i2c.3: bus 3 rev1.4.0 at 100 kHz
  129. Advanced Linux Sound Architecture Driver Version 1.0.24.
  130. Switching to clocksource 32k_counter
  131. musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
  132. musb-hdrc musb-hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92
  133. NET: Registered protocol family 2
  134. IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
  135. TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  136. TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
  137. TCP: Hash tables configured (established 16384 bind 16384)
  138. TCP reno registered
  139. UDP hash table entries: 256 (order: 0, 4096 bytes)
  140. UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  141. NET: Registered protocol family 1
  142. RPC: Registered named UNIX socket transport module.
  143. RPC: Registered udp transport module.
  144. RPC: Registered tcp transport module.
  145. RPC: Registered tcp NFSv4.1 backchannel transport module.
  146. audit: initializing netlink socket (disabled)
  147. type=2000 audit(0.132:1): initialized
  148. VFS: Disk quotas dquot_6.5.2
  149. Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  150. Registering unionfs 2.5.10 (for 3.1.0-rc4)
  151. JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
  152. fuse init (API version 7.17)
  153. msgmni has been set to 972
  154. Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  155. io scheduler noop registered
  156. io scheduler deadline registered (default)
  157. OMAP DSS rev 2.0
  158. omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0
  159. omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1
  160. omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2
  161. console [ttyO2] enabled
  162. omap_uart.3: ttyO3 at MMIO 0x49042000 (irq = 80) is a OMAP UART3
  163. loop: module loaded
  164. twl4030_madc twl4030_madc: clk disabled, enabling
  165. omap2-nand driver initializing
  166. ONFI flash detected
  167. NAND device: Manufacturer ID: 0x2c, Chip ID: 0xbc (Micron NAND 512MiB 1,8V 16-bit)
  168. Creating 5 MTD partitions on "omap2-nand.0":
  169. 0x000000000000-0x000000080000 : "xloader"
  170. 0x000000080000-0x000000240000 : "uboot"
  171. 0x000000240000-0x000000280000 : "uboot environment"
  172. 0x000000280000-0x000000680000 : "linux"
  173. 0x000000680000-0x000020000000 : "rootfs"
  174. smsc911x: Driver version 2008-10-21
  175. smsc911x-mdio: probed
  176. smsc911x smsc911x.0: eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=0:01, irq=-1)
  177. smsc911x smsc911x.0: eth0: MAC Address: 00:15:c9:28:de:7c
  178. smsc911x: Driver version 2008-10-21
  179. usbcore: registered new interface driver asix
  180. usbcore: registered new interface driver cdc_ether
  181. cdc_ncm: 04-Aug-2011
  182. usbcore: registered new interface driver cdc_ncm
  183. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  184. ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
  185. ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
  186. ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
  187. ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
  188. usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  189. usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  190. usb usb1: Product: OMAP-EHCI Host Controller
  191. usb usb1: Manufacturer: Linux 3.2.0+ ehci_hcd
  192. usb usb1: SerialNumber: ehci-omap.0
  193. hub 1-0:1.0: USB hub found
  194. hub 1-0:1.0: 3 ports detected
  195. Initializing USB Mass Storage driver...
  196. usbcore: registered new interface driver usb-storage
  197. USB Mass Storage support registered.
  198. mousedev: PS/2 mouse device common for all mice
  199. ft5x0x_ts 3-0038: Unabled to fetch data, error: -121
  200. input: ft5x0x_ts as /devices/platform/omap/omap_i2c.3/i2c-3/3-0038/input/input0
  201. twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
  202. i2c /dev entries driver
  203. cpuidle: using governor ladder
  204. cpuidle: using governor menu
  205. usbcore: registered new interface driver usbhid
  206. usbhid: USB HID core driver
  207. omap-iommu omap-iommu.0: isp registered
  208. usbcore: registered new interface driver snd-usb-audio
  209. overo SoC init
  210. asoc: twl4030-hifi <-> omap-mcbsp-dai.1 mapping ok
  211. ALSA device list:
  212. #0: overo
  213. oprofile: hardware counters not available
  214. oprofile: using timer interrupt.
  215. TCP cubic registered
  216. NET: Registered protocol family 17
  217. NET: Registered protocol family 15
  218. Registering the dns_resolver key type
  219. VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
  220. ThumbEE CPU extension supported.
  221. sr_init: No PMIC hook to init smartreflex
  222. smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized
  223. smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized
  224. clock: disabling unused clocks to save power
  225. registered taskstats version 1
  226. fbcvt: 1024x768@60: CVT Name - .786M3-R
  227. Console: switching to colour frame buffer device 128x48
  228. regulator_init_complete: VDAC: incomplete constraints, leaving on
  229. twl_rtc twl_rtc: setting system clock to 2000-01-01 00:26:13 UTC (946686373)
  230. Waiting for root device /dev/mmcblk0p2...
  231. mmc0: host does not support reading read-only switch. assuming write-enable.
  232. mmc0: new high speed SDHC card at address b368
  233. mmcblk0: mmc0:b368 LEXAR 7.45 GiB
  234. mmcblk0: unknown partition table
  235. VFS: Cannot open root device "mmcblk0p2" or unknown-block(179,2)
  236. Please append a correct "root=" boot option; here are the available partitions:
  237. 1f00 512 mtdblock0 (driver?)
  238. 1f01 1792 mtdblock1 (driver?)
  239. 1f02 256 mtdblock2 (driver?)
  240. 1f03 4096 mtdblock3 (driver?)
  241. 1f04 517632 mtdblock4 (driver?)
  242. b300 7822336 mmcblk0 driver: mmcblk
  243. Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(179,2)
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!