API tools faq
paste
lcvette

xk7130 closed loop finally 6-22-18

lcvette
Jun 22nd, 2018
122
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 18.08 KB | None | 0 0
raw download clone embed print report
  1. # Generated by PNCconf at Thu Nov 9 12:55:45 2017
  2. # If you make changes to this file, they will be
  3. # overwritten when you run PNCconf again
  4.  
  5. loadrt trivkins
  6. loadrt [EMCMOT]EMCMOT servo_period_nsec=[EMCMOT]SERVO_PERIOD num_joints=[TRAJ]AXES num_dio=16
  7. loadrt hostmot2
  8. loadrt hm2_eth board_ip="10.10.10.10" config=" num_encoders=6 num_pwmgens=0 num_stepgens=5 sserial_port_0=00000x"
  9. setp hm2_7i92.0.watchdog.timeout_ns 5000000
  10. loadrt pid names=pid.x,pid.y,pid.z,pid.a,pid.s
  11. loadrt abs names=abs.spindle
  12. loadrt lowpass names=lowpass.spindle
  13. loadrt scale names=scale.spindle
  14. loadrt near
  15. loadrt xor2 count=4
  16.  
  17. addf hm2_7i92.0.read servo-thread
  18. addf motion-command-handler servo-thread
  19. addf motion-controller servo-thread
  20. addf pid.x.do-pid-calcs servo-thread
  21. addf pid.y.do-pid-calcs servo-thread
  22. addf pid.z.do-pid-calcs servo-thread
  23. addf pid.a.do-pid-calcs servo-thread
  24. addf pid.s.do-pid-calcs servo-thread
  25. addf scale.spindle servo-thread
  26. addf abs.spindle servo-thread
  27. addf lowpass.spindle servo-thread
  28. addf near.0 servo-thread
  29. addf hm2_7i92.0.write servo-thread
  30. addf xor2.0 servo-thread
  31. addf xor2.1 servo-thread
  32.  
  33. setp hm2_7i92.0.dpll.01.timer-us -100
  34. setp hm2_7i92.0.stepgen.timer-number 1
  35. setp hm2_7i92.0.encoder.timer-number 1
  36.  
  37. # external output signals
  38.  
  39. # --- DIGITAL OUTPUT ---
  40. net atc-out hm2_7i92.0.7i76.0.3.output-07 <= motion.digital-out-00
  41. net atc-in hm2_7i92.0.7i76.0.3.output-08 <= motion.digital-out-01
  42.  
  43. # --- INCLUDES MANUAL TOOL RELEASE BUTTON INPUT BELOW ---
  44. net unclamp-tool-button xor2.0.in0 <= hm2_7i92.0.7i76.0.3.input-06
  45. net unclamp-tool-toolchange xor2.0.in1 <= motion.digital-out-02
  46. net drawbar-release hm2_7i92.0.7i76.0.3.output-03 <= xor2.0.out
  47. net atc-fwd hm2_7i92.0.7i76.0.3.output-05 <= motion.digital-out-03
  48. net atc-rev hm2_7i92.0.7i76.0.3.output-06 <= motion.digital-out-04
  49.  
  50. # --- SPINDLE ORIENT BEGIN ---
  51. net spindle-orient-start motion.spindle-orient hm2_7i92.0.7i77.0.0.output-08
  52.  
  53. # --- SPINDLE-ENABLE ---
  54. net spindle-enable hm2_7i92.0.7i77.0.0.output-09
  55.  
  56. # --- SPINDLE lOCKED ---
  57. net spindle-locked motion.spindle-locked hm2_7i92.0.7i77.0.0.output-11
  58.  
  59. # --- X-ENABLE ---
  60. net x-enable hm2_7i92.0.7i76.0.3.output-12
  61.  
  62. # --- Y-ENABLE ---
  63. net y-enable hm2_7i92.0.7i76.0.3.output-13
  64.  
  65. # --- Z-ENABLE ---
  66. net z-enable hm2_7i92.0.7i76.0.3.output-14
  67.  
  68. # --- A-ENABLE ---
  69. net a-enable hm2_7i92.0.7i76.0.3.output-15
  70.  
  71. # --- Z-ENABLE ---
  72. net z-enable hm2_7i92.0.7i76.0.3.output-01
  73.  
  74. # --- COOLANT-FLOOD ---
  75. net coolant-flood hm2_7i92.0.7i76.0.3.output-04
  76.  
  77. # external input signals
  78.  
  79. # --- SPINDLE ORIENT ENDED ---
  80. net spindle-orient-end motion.spindle-is-oriented hm2_7i92.0.7i77.0.0.input-31
  81.  
  82. # --- ESTOP-EXT ---
  83. net estop-ext <= hm2_7i92.0.7i76.0.3.input-21
  84.  
  85. # --- PROBE-IN ---
  86. net probe-in <= hm2_7i92.0.7i77.0.0.input-15
  87.  
  88. # --- DIGITAL INPUTS ---
  89. net atc-is-in hm2_7i92.0.7i76.0.3.input-01 <= motion.digital-in-00
  90.  
  91. net atc-is-out hm2_7i92.0.7i76.0.3.input-00 <= motion.digital-in-01
  92.  
  93. net atc-zero hm2_7i92.0.7i76.0.3.input-03 <= motion.digital-in-03
  94.  
  95. net atc-index hm2_7i92.0.7i76.0.3.input-02 <= motion.digital-in-04
  96.  
  97. net tool-released hm2_7i92.0.7i76.0.3.input-05 <= motion.digital-in-02
  98.  
  99. net tool-clamped hm2_7i92.0.7i76.0.3.input-07 <= motion.digital-in-05
  100.  
  101. # --- HOME-Z ---
  102. net home-z <= hm2_7i92.0.7i77.0.0.input-05-not
  103.  
  104. # --- LIMIT-Z ---
  105. net limit-z <= hm2_7i92.0.7i77.0.0.input-04-not
  106.  
  107. # --- HOME-Y ---
  108. net home-y <= hm2_7i92.0.7i77.0.0.input-03-not
  109.  
  110. # --- LIMIT-Y ---
  111. net limit-y <= hm2_7i92.0.7i77.0.0.input-02-not
  112.  
  113. # --- HOME-X ---
  114. net home-x <= hm2_7i92.0.7i77.0.0.input-01-not
  115.  
  116. # --- LIMIT-X ---
  117. net limit-x <= hm2_7i92.0.7i77.0.0.input-00-not
  118.  
  119. #*******************
  120. # AXIS X
  121. #*******************
  122.  
  123. setp pid.x.Pgain [AXIS_0]P
  124. setp pid.x.Igain [AXIS_0]I
  125. setp pid.x.Dgain [AXIS_0]D
  126. setp pid.x.bias [AXIS_0]BIAS
  127. setp pid.x.FF0 [AXIS_0]FF0
  128. setp pid.x.FF1 [AXIS_0]FF1
  129. setp pid.x.FF2 [AXIS_0]FF2
  130. setp pid.x.deadband [AXIS_0]DEADBAND
  131. setp pid.x.maxoutput [AXIS_0]MAX_OUTPUT
  132. setp pid.x.error-previous-target true
  133. setp pid.x.maxerror 0
  134.  
  135. net x-index-enable <=> pid.x.index-enable
  136. net x-enable => pid.x.enable
  137. net x-pos-cmd => pid.x.command
  138. net x-vel-cmd => pid.x.command-deriv
  139. net x-pos-fb => pid.x.feedback
  140. net x-output => pid.x.output
  141.  
  142. # Step Gen signals/setup
  143.  
  144. setp hm2_7i92.0.stepgen.00.dirsetup [AXIS_0]DIRSETUP
  145. setp hm2_7i92.0.stepgen.00.dirhold [AXIS_0]DIRHOLD
  146. setp hm2_7i92.0.stepgen.00.steplen [AXIS_0]STEPLEN
  147. setp hm2_7i92.0.stepgen.00.stepspace [AXIS_0]STEPSPACE
  148. setp hm2_7i92.0.stepgen.00.position-scale [AXIS_0]STEP_SCALE
  149. setp hm2_7i92.0.stepgen.00.step_type 0
  150. setp hm2_7i92.0.stepgen.00.control-type 1
  151. setp hm2_7i92.0.stepgen.00.maxaccel [AXIS_0]STEPGEN_MAXACCEL
  152. setp hm2_7i92.0.stepgen.00.maxvel [AXIS_0]STEPGEN_MAXVEL
  153.  
  154. # ---closedloop stepper signals---
  155.  
  156. net x-pos-cmd <= axis.0.motor-pos-cmd
  157. net x-vel-cmd <= axis.0.joint-vel-cmd
  158. net x-output <= hm2_7i92.0.stepgen.00.velocity-cmd
  159. ##net x-pos-fb <= hm2_7i92.0.stepgen.00.position-fb
  160. net x-pos-fb <= hm2_7i92.0.encoder.01.position
  161. ##net x-pos-fb => axis.0.motor-pos-fb
  162. ##net x-encpos-fb => axis.0.motor-pos-fb
  163. net x-enable <= axis.0.amp-enable-out
  164. net x-enable => hm2_7i92.0.stepgen.00.enable
  165.  
  166. # ---Encoder feedback signals/setup---
  167.  
  168. setp hm2_7i92.0.encoder.01.counter-mode 0
  169. setp hm2_7i92.0.encoder.01.filter 1
  170. setp hm2_7i92.0.encoder.01.index-invert 0
  171. setp hm2_7i92.0.encoder.01.index-mask 0
  172. setp hm2_7i92.0.encoder.01.index-mask-invert 0
  173. setp hm2_7i92.0.encoder.01.scale [AXIS_0]ENCODER_SCALE
  174.  
  175. # ****the following line is for drive tuning purposes only****
  176. ##net x-encpos-fb <= hm2_7i92.0.encoder.01.position
  177. net x-vel-fb <= hm2_7i92.0.encoder.01.velocity
  178. net x-pos-fb => axis.0.motor-pos-fb
  179. net x-index-enable axis.0.index-enable <=> hm2_7i92.0.encoder.01.index-enable
  180. net x-pos-rawcounts <= hm2_7i92.0.encoder.01.rawcounts
  181.  
  182. # ---setup home / limit switch signals---
  183.  
  184. net home-x => axis.0.home-sw-in
  185. net limit-x => axis.0.neg-lim-sw-in
  186.  
  187. #*******************
  188. # AXIS Y
  189. #*******************
  190.  
  191. setp pid.y.Pgain [AXIS_1]P
  192. setp pid.y.Igain [AXIS_1]I
  193. setp pid.y.Dgain [AXIS_1]D
  194. setp pid.y.bias [AXIS_1]BIAS
  195. setp pid.y.FF0 [AXIS_1]FF0
  196. setp pid.y.FF1 [AXIS_1]FF1
  197. setp pid.y.FF2 [AXIS_1]FF2
  198. setp pid.y.deadband [AXIS_1]DEADBAND
  199. setp pid.y.maxoutput [AXIS_1]MAX_OUTPUT
  200. setp pid.y.error-previous-target true
  201. setp pid.y.maxerror 0
  202.  
  203. net y-index-enable <=> pid.y.index-enable
  204. net y-enable => pid.y.enable
  205. net y-pos-cmd => pid.y.command
  206. net y-vel-cmd => pid.y.command-deriv
  207. net y-pos-fb => pid.y.feedback
  208. net y-output => pid.y.output
  209.  
  210. # Step Gen signals/setup
  211.  
  212. setp hm2_7i92.0.stepgen.01.dirsetup [AXIS_1]DIRSETUP
  213. setp hm2_7i92.0.stepgen.01.dirhold [AXIS_1]DIRHOLD
  214. setp hm2_7i92.0.stepgen.01.steplen [AXIS_1]STEPLEN
  215. setp hm2_7i92.0.stepgen.01.stepspace [AXIS_1]STEPSPACE
  216. setp hm2_7i92.0.stepgen.01.position-scale [AXIS_1]STEP_SCALE
  217. setp hm2_7i92.0.stepgen.01.step_type 0
  218. setp hm2_7i92.0.stepgen.01.control-type 1
  219. setp hm2_7i92.0.stepgen.01.maxaccel [AXIS_1]STEPGEN_MAXACCEL
  220. setp hm2_7i92.0.stepgen.01.maxvel [AXIS_1]STEPGEN_MAXVEL
  221.  
  222. # ---closedloop stepper signals---
  223.  
  224. net y-pos-cmd <= axis.1.motor-pos-cmd
  225. net y-vel-cmd <= axis.1.joint-vel-cmd
  226. net y-output <= hm2_7i92.0.stepgen.01.velocity-cmd
  227. ##net y-pos-fb <= hm2_7i92.0.stepgen.01.position-fb
  228. net y-pos-fb <= hm2_7i92.0.encoder.02.position
  229. ##net y-pos-fb => axis.1.motor-pos-fb
  230. ##net y-encpos-fb => axis.1.motor-pos-fb
  231. net y-enable <= axis.1.amp-enable-out
  232. net y-enable => hm2_7i92.0.stepgen.01.enable
  233.  
  234. # ---Encoder feedback signals/setup---
  235.  
  236. setp hm2_7i92.0.encoder.02.counter-mode 0
  237. setp hm2_7i92.0.encoder.02.filter 1
  238. setp hm2_7i92.0.encoder.02.index-invert 0
  239. setp hm2_7i92.0.encoder.02.index-mask 0
  240. setp hm2_7i92.0.encoder.02.index-mask-invert 0
  241. setp hm2_7i92.0.encoder.02.scale [AXIS_1]ENCODER_SCALE
  242.  
  243. # ****the following line is for drive tuning purposes only****
  244. ##net y-encpos-fb <= hm2_7i92.0.encoder.02.position
  245. net y-vel-fb <= hm2_7i92.0.encoder.02.velocity
  246. net y-pos-fb => axis.1.motor-pos-fb
  247. net y-index-enable axis.1.index-enable <=> hm2_7i92.0.encoder.02.index-enable
  248. net y-pos-rawcounts <= hm2_7i92.0.encoder.02.rawcounts
  249.  
  250. # ---setup home / limit switch signals---
  251.  
  252. net home-y => axis.1.home-sw-in
  253. net limit-y => axis.1.neg-lim-sw-in
  254.  
  255.  
  256. #*******************
  257. # AXIS Z
  258. #*******************
  259.  
  260. setp pid.z.Pgain [AXIS_2]P
  261. setp pid.z.Igain [AXIS_2]I
  262. setp pid.z.Dgain [AXIS_2]D
  263. setp pid.z.bias [AXIS_2]BIAS
  264. setp pid.z.FF0 [AXIS_2]FF0
  265. setp pid.z.FF1 [AXIS_2]FF1
  266. setp pid.z.FF2 [AXIS_2]FF2
  267. setp pid.z.deadband [AXIS_2]DEADBAND
  268. setp pid.z.maxoutput [AXIS_2]MAX_OUTPUT
  269. setp pid.z.error-previous-target true
  270. setp pid.z.maxerror 0
  271.  
  272. net z-index-enable <=> pid.z.index-enable
  273. net z-enable => pid.z.enable
  274. net z-pos-cmd => pid.z.command
  275. net z-vel-cmd => pid.z.command-deriv
  276. net z-pos-fb => pid.z.feedback
  277. net z-output => pid.z.output
  278.  
  279. # Step Gen signals/setup
  280.  
  281. setp hm2_7i92.0.stepgen.02.dirsetup [AXIS_2]DIRSETUP
  282. setp hm2_7i92.0.stepgen.02.dirhold [AXIS_2]DIRHOLD
  283. setp hm2_7i92.0.stepgen.02.steplen [AXIS_2]STEPLEN
  284. setp hm2_7i92.0.stepgen.02.stepspace [AXIS_2]STEPSPACE
  285. setp hm2_7i92.0.stepgen.02.position-scale [AXIS_2]STEP_SCALE
  286. setp hm2_7i92.0.stepgen.02.step_type 0
  287. setp hm2_7i92.0.stepgen.02.control-type 1
  288. setp hm2_7i92.0.stepgen.02.maxaccel [AXIS_2]STEPGEN_MAXACCEL
  289. setp hm2_7i92.0.stepgen.02.maxvel [AXIS_2]STEPGEN_MAXVEL
  290.  
  291. # ---closedloop stepper signals---
  292.  
  293. net z-pos-cmd <= axis.2.motor-pos-cmd
  294. net z-vel-cmd <= axis.2.joint-vel-cmd
  295. net z-output <= hm2_7i92.0.stepgen.02.velocity-cmd
  296. ##net z-pos-fb <= hm2_7i92.0.stepgen.02.position-fb
  297. net z-pos-fb <= hm2_7i92.0.encoder.03.position
  298. ##net z-pos-fb => axis.2.motor-pos-fb
  299. ##net z-encpos-fb => axis.2.motor-pos-fb
  300. net z-enable <= axis.2.amp-enable-out
  301. net z-enable => hm2_7i92.0.stepgen.02.enable
  302.  
  303. # ---Encoder feedback signals/setup---
  304.  
  305. setp hm2_7i92.0.encoder.03.counter-mode 0
  306. setp hm2_7i92.0.encoder.03.filter 1
  307. setp hm2_7i92.0.encoder.03.index-invert 0
  308. setp hm2_7i92.0.encoder.03.index-mask 0
  309. setp hm2_7i92.0.encoder.03.index-mask-invert 0
  310. setp hm2_7i92.0.encoder.03.scale [AXIS_2]ENCODER_SCALE
  311.  
  312. # ****the following line is for drive tuning purposes only****
  313. ##net z-encpos-fb <= hm2_7i92.0.encoder.03.position
  314. net z-vel-fb <= hm2_7i92.0.encoder.03.velocity
  315. net z-pos-fb => axis.2.motor-pos-fb
  316. net z-index-enable axis.2.index-enable <=> hm2_7i92.0.encoder.03.index-enable
  317. net z-pos-rawcounts <= hm2_7i92.0.encoder.03.rawcounts
  318.  
  319. # ---setup home / limit switch signals---
  320.  
  321. net home-z => axis.2.home-sw-in
  322. net limit-z => axis.2.neg-lim-sw-in
  323.  
  324.  
  325. #*******************
  326. # AXIS A
  327. #*******************
  328.  
  329. setp pid.a.Pgain [AXIS_3]P
  330. setp pid.a.Igain [AXIS_3]I
  331. setp pid.a.Dgain [AXIS_3]D
  332. setp pid.a.bias [AXIS_3]BIAS
  333. setp pid.a.FF0 [AXIS_3]FF0
  334. setp pid.a.FF1 [AXIS_3]FF1
  335. setp pid.a.FF2 [AXIS_3]FF2
  336. setp pid.a.deadband [AXIS_3]DEADBAND
  337. setp pid.a.maxoutput [AXIS_3]MAX_OUTPUT
  338. setp pid.a.error-previous-target true
  339. setp pid.a.maxerror 0
  340.  
  341. net a-index-enable <=> pid.a.index-enable
  342. net a-enable => pid.a.enable
  343. net a-pos-cmd => pid.a.command
  344. net a-vel-cmd => pid.a.command-deriv
  345. net a-pos-fb => pid.a.feedback
  346. net a-output => pid.a.output
  347.  
  348. # Step Gen signals/setup
  349.  
  350. setp hm2_7i92.0.stepgen.03.dirsetup [AXIS_3]DIRSETUP
  351. setp hm2_7i92.0.stepgen.03.dirhold [AXIS_3]DIRHOLD
  352. setp hm2_7i92.0.stepgen.03.steplen [AXIS_3]STEPLEN
  353. setp hm2_7i92.0.stepgen.03.stepspace [AXIS_3]STEPSPACE
  354. setp hm2_7i92.0.stepgen.03.position-scale [AXIS_3]STEP_SCALE
  355. setp hm2_7i92.0.stepgen.03.step_type 0
  356. setp hm2_7i92.0.stepgen.03.control-type 1
  357. setp hm2_7i92.0.stepgen.03.maxaccel [AXIS_3]STEPGEN_MAXACCEL
  358. setp hm2_7i92.0.stepgen.03.maxvel [AXIS_3]STEPGEN_MAXVEL
  359.  
  360. # ---closedloop stepper signals---
  361.  
  362. net a-pos-cmd <= axis.3.motor-pos-cmd
  363. net a-vel-cmd <= axis.3.joint-vel-cmd
  364. net a-output <= hm2_7i92.0.stepgen.03.velocity-cmd
  365. net a-pos-fb <= hm2_7i92.0.encoder.04.position
  366. net a-pos-fb => axis.3.motor-pos-fb
  367. net a-enable <= axis.3.amp-enable-out
  368. net a-enable => hm2_7i92.0.stepgen.03.enable
  369.  
  370. # ---Encoder feedback signals/setup---
  371.  
  372. setp hm2_7i92.0.encoder.04.counter-mode 0
  373. setp hm2_7i92.0.encoder.04.filter 1
  374. setp hm2_7i92.0.encoder.04.index-invert 0
  375. setp hm2_7i92.0.encoder.04.index-mask 0
  376. setp hm2_7i92.0.encoder.04.index-mask-invert 0
  377. setp hm2_7i92.0.encoder.04.scale [AXIS_3]ENCODER_SCALE
  378.  
  379.  
  380. net a-vel-fb <= hm2_7i92.0.encoder.04.velocity
  381. net a-pos-fb => axis.3.motor-pos-fb
  382. net a-index-enable axis.3.index-enable <=> hm2_7i92.0.encoder.04.index-enable
  383. net a-pos-rawcounts <= hm2_7i92.0.encoder.04.rawcounts
  384.  
  385. # ---setup home / limit switch signals---
  386.  
  387. net a-home-sw => axis.3.home-sw-in
  388. net a-neg-limit => axis.3.neg-lim-sw-in
  389. net a-pos-limit => axis.3.pos-lim-sw-in
  390.  
  391. #*******************
  392. # SPINDLE S
  393. #*******************
  394.  
  395. setp pid.s.Pgain [SPINDLE_9]P
  396. setp pid.s.Igain [SPINDLE_9]I
  397. setp pid.s.Dgain [SPINDLE_9]D
  398. setp pid.s.bias [SPINDLE_9]BIAS
  399. setp pid.s.FF0 [SPINDLE_9]FF0
  400. setp pid.s.FF1 [SPINDLE_9]FF1
  401. setp pid.s.FF2 [SPINDLE_9]FF2
  402. setp pid.s.deadband [SPINDLE_9]DEADBAND
  403. setp pid.s.maxoutput [SPINDLE_9]MAX_OUTPUT
  404. setp pid.s.error-previous-target true
  405.  
  406. net spindle-index-enable <=> pid.s.index-enable
  407. net spindle-enable => pid.s.enable
  408. net spindle-vel-cmd-rpm => pid.s.command
  409. net spindle-vel-fb-rpm-abs => pid.s.feedback
  410. net spindle-output <= pid.s.output
  411.  
  412. # ---PWM Generator signals/setup---
  413.  
  414. setp hm2_7i92.0.7i77.0.1.analogout0-scalemax [SPINDLE_9]OUTPUT_SCALE
  415. setp hm2_7i92.0.7i77.0.1.analogout0-minlim [SPINDLE_9]OUTPUT_MIN_LIMIT
  416. setp hm2_7i92.0.7i77.0.1.analogout0-maxlim [SPINDLE_9]OUTPUT_MAX_LIMIT
  417.  
  418. net spindle-output => hm2_7i92.0.7i77.0.1.analogout0
  419. net spindle-enable hm2_7i92.0.7i77.0.1.analogena
  420.  
  421. # ---Encoder feedback signals/setup---
  422.  
  423. setp hm2_7i92.0.encoder.00.counter-mode 0
  424. setp hm2_7i92.0.encoder.00.filter 1
  425. setp hm2_7i92.0.encoder.00.index-invert 0
  426. setp hm2_7i92.0.encoder.00.index-mask 0
  427. setp hm2_7i92.0.encoder.00.index-mask-invert 0
  428. setp hm2_7i92.0.encoder.00.scale [SPINDLE_9]ENCODER_SCALE
  429.  
  430. net spindle-revs <= hm2_7i92.0.encoder.00.position
  431. net spindle-vel-fb-rps <= hm2_7i92.0.encoder.00.velocity
  432. net spindle-index-enable <=> hm2_7i92.0.encoder.00.index-enable
  433.  
  434. # ---setup spindle control signals---
  435.  
  436. net spindle-vel-cmd-rps <= motion.spindle-speed-out-rps
  437. net spindle-vel-cmd-rps-abs <= motion.spindle-speed-out-rps-abs
  438. net spindle-vel-cmd-rpm <= motion.spindle-speed-out
  439. net spindle-vel-cmd-rpm-abs <= motion.spindle-speed-out-abs
  440. net spindle-enable <= motion.spindle-on
  441. net spindle-cw <= motion.spindle-forward
  442. net spindle-ccw <= motion.spindle-reverse
  443. net spindle-brake <= motion.spindle-brake
  444. net spindle-revs => motion.spindle-revs
  445. net spindle-at-speed => motion.spindle-at-speed
  446. net spindle-vel-fb-rps => motion.spindle-speed-in
  447. net spindle-index-enable <=> motion.spindle-index-enable
  448.  
  449. # ---Setup spindle at speed signals---
  450.  
  451. net spindle-vel-cmd-rps => near.0.in1
  452. net spindle-vel-fb-rps => near.0.in2
  453.  
  454. ##########################
  455. net spindle-at-speed <= near.0.out
  456. ##########################
  457. setp near.0.scale 1.000000
  458. ##########################
  459. setp near.0.difference 5
  460.  
  461. ##sets spindle-at-speed true
  462.  
  463. # Use ACTUAL spindle velocity from spindle encoder
  464. # spindle-velocity bounces around so we filter it with lowpass
  465. # spindle-velocity is signed so we use absolute component to remove sign
  466. # ACTUAL velocity is in RPS not RPM so we scale it.
  467.  
  468. setp scale.spindle.gain 60
  469. setp lowpass.spindle.gain 1.000000
  470. net spindle-vel-fb-rps => scale.spindle.in
  471. net spindle-fb-rpm scale.spindle.out => abs.spindle.in
  472. net spindle-fb-rpm-abs abs.spindle.out => lowpass.spindle.in
  473. net spindle-fb-rpm-abs-filtered lowpass.spindle.out
  474.  
  475. # ---coolant signals---
  476. net coolant-mist <= iocontrol.0.coolant-mist
  477. net coolant-flood <= iocontrol.0.coolant-flood
  478.  
  479. # ---probe signal---
  480.  
  481. net probe-in => motion.probe-input
  482.  
  483. # ---motion control signals---
  484.  
  485. net in-position <= motion.in-position
  486. net machine-is-enabled <= motion.motion-enabled
  487.  
  488. # ---digital in / out signals---
  489.  
  490. # ---estop signals---
  491.  
  492. net estop-out <= iocontrol.0.user-enable-out
  493. net estop-ext => iocontrol.0.emc-enable-in
  494.  
  495. # ---manual tool change signals---
  496.  
  497. #loadusr -W hal_manualtoolchange
  498. #net tool-change-request iocontrol.0.tool-change => hal_manualtoolchange.change
  499. #net tool-change-confirmed iocontrol.0.tool-changed <= hal_manualtoolchange.changed
  500. #net tool-number iocontrol.0.tool-prep-number => hal_manualtoolchange.number
  501. net tool-prepare-loopback iocontrol.0.tool-prepare => iocontrol.0.tool-prepared
  502. net tool-change-loop iocontrol.0.tool-change => iocontrol.0.tool-changed
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!