patched kernel panic

TIM-1.0
WTMI-devel-18.12.0-a0a1cb8
WTMI: system early-init
CPU VDD voltage default value: 1.155V
NOTICE:  Booting Trusted Firmware
NOTICE:  BL1: v1.5(release):1f8ca7e (Marvell-devel-18.12.2)
NOTICE:  BL1: Built : 09:47:03, Feb 20 2019
NOTICE:  BL1: Booting BL2
NOTICE:  BL2: v1.5(release):1f8ca7e (Marvell-devel-18.12.2)
NOTICE:  BL2: Built : 09:47:04, Feb 20 2019
NOTICE:  BL1: Booting BL31
NOTICE:  BL31: v1.5(release):1f8ca7e (Marvell-devel-18.12.2)
NOTICE:  BL31: Built : 09:4

U-Boot 2018.03-devel-18.12.3-gc9aa92c-armbian (Feb 20 2019 - 09:45:04 +0100)

Model: Marvell Armada 3720 Community Board ESPRESSOBin
       CPU     1000 [MHz]
       L2      800 [MHz]
       TClock  200 [MHz]
       DDR     800 [MHz]
DRAM:  1 GiB
Comphy chip #0:
Comphy-0: USB3          5 Gbps
Comphy-1: PEX0          2.5 Gbps
Comphy-2: SATA0         6 Gbps
SATA link 0 timeout.
AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
flags: ncq led only pmp fbss pio slum part sxs
PCIE-0: Link down
MMC:   sdhci@d0000: 0, sdhci@d8000: 1
Loading Environment from SPI Flash... SF: Detected w25q32dw with page size 256 Bytes, erase size 4 KiB, total 4 MiB
OK
Model: Marvell Armada 3720 Community Board ESPRESSOBin
Net:   eth0: neta@30000 [PRIME]
Hit any key to stop autoboot:  0
/
Card did not respond to voltage select!
** Bad device mmc 1 **
## Executing script at 06d00000
Wrong image format for "source" command
/boot/
Card did not respond to voltage select!
** Bad device mmc 1 **
## Executing script at 06d00000
Wrong image format for "source" command
/
** File not found /boot.scr **
## Executing script at 06d00000
Wrong image format for "source" command
/boot/
1120 bytes read in 15 ms (72.3 KiB/s)
## Executing script at 06d00000
221 bytes read in 5 ms (43 KiB/s)
16486912 bytes read in 708 ms (22.2 MiB/s)
4686790 bytes read in 211 ms (21.2 MiB/s)
** File not found /boot/dtb/marvell/armada-3720-community.dtb **
8942 bytes read in 9 ms (969.7 KiB/s)
## Loading init Ramdisk from Legacy Image at 01100000 ...
   Image Name:   uInitrd
   Image Type:   AArch64 Linux RAMDisk Image (gzip compressed)
   Data Size:    4686726 Bytes = 4.5 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 06000000
   Booting using the fdt blob at 0x6000000
   Loading Ramdisk to 3f1b2000, end 3f62a386 ... OK
   Using Device Tree in place at 0000000006000000, end 00000000060052ed

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[    0.000000] Linux version 4.19.27-mvebu64 (root@ubuntu) (gcc version 7.2.1 20171011 (Linaro GCC 7.2-2017.11)) #5.76 SMP PREEMPT Thu Mar 7 11:54:00 CET 2019
[    0.000000] Machine model: Globalscale Marvell ESPRESSOBin Board
[    0.000000] earlycon: ar3700_uart0 at MMIO 0x00000000d0012000 (options '')
[    0.000000] bootconsole [ar3700_uart0] enabled
[    4.288927] Internal error: synchronous parity or ECC error: 86000018 [#1] PREEMPT SMP
[    4.294233] Modules linked in:
[    4.297370] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.19.27-mvebu64 #5.76
[    4.304534] Hardware name: Globalscale Marvell ESPRESSOBin Board (DT)
[    4.311167] pstate: 80000085 (Nzcv daIf -PAN -UAO)
[    4.316104] pc : cpu_load_update_nohz_stop+0x0/0xb8
[    4.321115] lr : __tick_nohz_idle_restart_tick+0x40/0xe0
[    4.326576] sp : ffffff80090e3ee0
[    4.329980] x29: ffffff80090e3ee0 x28: 0000000000000000
[    4.335446] x27: 0000000000000000 x26: 0000000000000000
[    4.340912] x25: 0000000000000000 x24: 0000000000000000
[    4.346377] x23: 0000000000000000 x22: 00000000ff60b530
[    4.351842] x21: ffffff8009088000 x20: 00000000ff60b530
[    4.357308] x19: ffffffc03ffd5d08 x18: ffffffffffffffff
[    4.362773] x17: 0000000000000001 x16: 0000000000000000
[    4.368240] x15: 0000000000000100 x14: 0000000000000100
[    4.373705] x13: 0000000000000400 x12: 0000000000000000
[    4.379171] x11: 0000000000000001 x10: 0000000000000910
[    4.384636] x9 : ffffff80090e3ea0 x8 : ffffffc03fa03d70
[    4.390102] x7 : ffffffc03ffd3248 x6 : 0000000007bb65d0
[    4.395567] x5 : 00ffffffffffffff x4 : 0010ed7f00000000
[    4.401032] x3 : 0000000000000000 x2 : ffffff8009089000
[    4.406499] x1 : 00000000003d0900 x0 : 0000000000080e30
[    4.411966] Process swapper/1 (pid: 0, stack limit = 0x(____ptrval____))
[    4.418864] Call trace:
[    4.421375]  cpu_load_update_nohz_stop+0x0/0xb8
[    4.426034]  tick_nohz_idle_exit+0x90/0xc0
[    4.430245]  do_idle+0x178/0x298
[    4.433559]  cpu_startup_entry+0x20/0x28
[    4.437595]  secondary_start_kernel+0x1a8/0x1e8
[    4.442254] Code: f9409401 f9000401 d65f03c0 d503201f (a9bc7bfd)
[    4.448525] SError Interrupt on CPU0, code 0xbf000001 -- SError
[    4.454615] ---[ end trace 41b57507bd483c61 ]---
[    4.459365] Kernel panic - not syncing: Attempted to kill the idle task!
[    4.466263] SMP: stopping secondary CPUs
[    5.510296] SMP: failed to stop secondary CPUs 0-1
[    5.512366] Kernel Offset: disabled
[    5.515950] CPU features: 0x0,2080200c
[    5.519802] Memory Limit: none
[    5.522942] ---[ end Kernel panic - not syncing: Attempted to kill the idle task! ]---