API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Jul 2nd, 2023
15
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 9.53 KB | None | 0 0
raw download clone embed print report
  1. smartctl 7.2 2020-12-30 r5155 [x86_64-linux-6.1.0-0.deb11.7-amd64] (local build)
  2. Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family: Western Digital Red
  6. Device Model: WDC WD20EFRX-68EUZN0
  7. Serial Number: WD-xxxxxx
  8. LU WWN Device Id: 5 0014ee 2b42888f5
  9. Firmware Version: 82.00A82
  10. User Capacity: 2.000.398.934.016 bytes [2,00 TB]
  11. Sector Sizes: 512 bytes logical, 4096 bytes physical
  12. Rotation Rate: 5400 rpm
  13. Device is: In smartctl database [for details use: -P show]
  14. ATA Version is: ACS-2 (minor revision not indicated)
  15. SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
  16. Local Time is: Sun Jul 2 13:29:48 2023 CEST
  17. SMART support is: Available - device has SMART capability.
  18. SMART support is: Enabled
  19.  
  20. === START OF READ SMART DATA SECTION ===
  21. SMART overall-health self-assessment test result: PASSED
  22.  
  23. General SMART Values:
  24. Offline data collection status: (0x82) Offline data collection activity
  25. was completed without error.
  26. Auto Offline Data Collection: Enabled.
  27. Self-test execution status: ( 0) The previous self-test routine completed
  28. without error or no self-test has ever
  29. been run.
  30. Total time to complete Offline
  31. data collection: (27060) seconds.
  32. Offline data collection
  33. capabilities: (0x7b) SMART execute Offline immediate.
  34. Auto Offline data collection on/off support.
  35. Suspend Offline collection upon new
  36. command.
  37. Offline surface scan supported.
  38. Self-test supported.
  39. Conveyance Self-test supported.
  40. Selective Self-test supported.
  41. SMART capabilities: (0x0003) Saves SMART data before entering
  42. power-saving mode.
  43. Supports SMART auto save timer.
  44. Error logging capability: (0x01) Error logging supported.
  45. General Purpose Logging supported.
  46. Short self-test routine
  47. recommended polling time: ( 2) minutes.
  48. Extended self-test routine
  49. recommended polling time: ( 273) minutes.
  50. Conveyance self-test routine
  51. recommended polling time: ( 5) minutes.
  52. SCT capabilities: (0x703d) SCT Status supported.
  53. SCT Error Recovery Control supported.
  54. SCT Feature Control supported.
  55. SCT Data Table supported.
  56.  
  57. SMART Attributes Data Structure revision number: 16
  58. Vendor Specific SMART Attributes with Thresholds:
  59. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  60. 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
  61. 3 Spin_Up_Time 0x0027 174 169 021 Pre-fail Always - 4291
  62. 4 Start_Stop_Count 0x0032 088 088 000 Old_age Always - 12389
  63. 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
  64. 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
  65. 9 Power_On_Hours 0x0032 033 033 000 Old_age Always - 49459
  66. 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
  67. 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
  68. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 538
  69. 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 95
  70. 193 Load_Cycle_Count 0x0032 196 196 000 Old_age Always - 12455
  71. 194 Temperature_Celsius 0x0022 119 105 000 Old_age Always - 28
  72. 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
  73. 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
  74. 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0
  75. 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
  76. 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
  77.  
  78. SMART Error Log Version: 1
  79. Warning: ATA error count 60566 inconsistent with error log pointer 2
  80.  
  81. ATA Error Count: 60566 (device log contains only the most recent five errors)
  82. CR = Command Register [HEX]
  83. FR = Features Register [HEX]
  84. SC = Sector Count Register [HEX]
  85. SN = Sector Number Register [HEX]
  86. CL = Cylinder Low Register [HEX]
  87. CH = Cylinder High Register [HEX]
  88. DH = Device/Head Register [HEX]
  89. DC = Device Command Register [HEX]
  90. ER = Error register [HEX]
  91. ST = Status register [HEX]
  92. Powered_Up_Time is measured from power on, and printed as
  93. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  94. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  95.  
  96. Error 60566 occurred at disk power-on lifetime: 49285 hours (2053 days + 13 hours)
  97. When the command that caused the error occurred, the device was active or idle.
  98.  
  99. After command completion occurred, registers were:
  100. ER ST SC SN CL CH DH
  101. -- -- -- -- -- -- --
  102. 04 61 02 00 00 00 a0 Device Fault; Error: ABRT
  103.  
  104. Commands leading to the command that caused the error were:
  105. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  106. -- -- -- -- -- -- -- -- ---------------- --------------------
  107. ef 10 02 00 00 00 a0 08 1d+22:00:33.916 SET FEATURES [Enable SATA feature]
  108. ec 00 00 00 00 00 a0 08 1d+22:00:33.916 IDENTIFY DEVICE
  109. ef 03 46 00 00 00 a0 08 1d+22:00:33.916 SET FEATURES [Set transfer mode]
  110. ef 10 02 00 00 00 a0 08 1d+22:00:33.915 SET FEATURES [Enable SATA feature]
  111. ec 00 00 00 00 00 a0 08 1d+22:00:33.915 IDENTIFY DEVICE
  112.  
  113. Error 60565 occurred at disk power-on lifetime: 49285 hours (2053 days + 13 hours)
  114. When the command that caused the error occurred, the device was active or idle.
  115.  
  116. After command completion occurred, registers were:
  117. ER ST SC SN CL CH DH
  118. -- -- -- -- -- -- --
  119. 04 61 46 00 00 00 a0 Device Fault; Error: ABRT
  120.  
  121. Commands leading to the command that caused the error were:
  122. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  123. -- -- -- -- -- -- -- -- ---------------- --------------------
  124. ef 03 46 00 00 00 a0 08 1d+22:00:33.916 SET FEATURES [Set transfer mode]
  125. ef 10 02 00 00 00 a0 08 1d+22:00:33.915 SET FEATURES [Enable SATA feature]
  126. ec 00 00 00 00 00 a0 08 1d+22:00:33.915 IDENTIFY DEVICE
  127. c8 00 00 00 08 00 e0 08 1d+22:00:33.881 READ DMA
  128. ef 10 02 00 00 00 a0 08 1d+22:00:33.880 SET FEATURES [Enable SATA feature]
  129.  
  130. Error 60564 occurred at disk power-on lifetime: 49285 hours (2053 days + 13 hours)
  131. When the command that caused the error occurred, the device was active or idle.
  132.  
  133. After command completion occurred, registers were:
  134. ER ST SC SN CL CH DH
  135. -- -- -- -- -- -- --
  136. 04 61 02 00 00 00 a0 Device Fault; Error: ABRT
  137.  
  138. Commands leading to the command that caused the error were:
  139. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  140. -- -- -- -- -- -- -- -- ---------------- --------------------
  141. ef 10 02 00 00 00 a0 08 1d+22:00:33.915 SET FEATURES [Enable SATA feature]
  142. ec 00 00 00 00 00 a0 08 1d+22:00:33.915 IDENTIFY DEVICE
  143. c8 00 00 00 08 00 e0 08 1d+22:00:33.881 READ DMA
  144. ef 10 02 00 00 00 a0 08 1d+22:00:33.880 SET FEATURES [Enable SATA feature]
  145. ec 00 00 00 00 00 a0 08 1d+22:00:33.880 IDENTIFY DEVICE
  146.  
  147. Error 60563 occurred at disk power-on lifetime: 49285 hours (2053 days + 13 hours)
  148. When the command that caused the error occurred, the device was active or idle.
  149.  
  150. After command completion occurred, registers were:
  151. ER ST SC SN CL CH DH
  152. -- -- -- -- -- -- --
  153. 04 61 00 00 08 00 e0 Device Fault; Error: ABRT at LBA = 0x00000800 = 2048
  154.  
  155. Commands leading to the command that caused the error were:
  156. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  157. -- -- -- -- -- -- -- -- ---------------- --------------------
  158. c8 00 00 00 08 00 e0 08 1d+22:00:33.881 READ DMA
  159. ef 10 02 00 00 00 a0 08 1d+22:00:33.880 SET FEATURES [Enable SATA feature]
  160. ec 00 00 00 00 00 a0 08 1d+22:00:33.880 IDENTIFY DEVICE
  161. ef 03 46 00 00 00 a0 08 1d+22:00:33.880 SET FEATURES [Set transfer mode]
  162. ef 10 02 00 00 00 a0 08 1d+22:00:33.879 SET FEATURES [Enable SATA feature]
  163.  
  164. Error 60562 occurred at disk power-on lifetime: 49285 hours (2053 days + 13 hours)
  165. When the command that caused the error occurred, the device was active or idle.
  166.  
  167. After command completion occurred, registers were:
  168. ER ST SC SN CL CH DH
  169. -- -- -- -- -- -- --
  170. 04 61 02 00 00 00 a0 Device Fault; Error: ABRT
  171.  
  172. Commands leading to the command that caused the error were:
  173. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  174. -- -- -- -- -- -- -- -- ---------------- --------------------
  175. ef 10 02 00 00 00 a0 08 1d+22:00:33.880 SET FEATURES [Enable SATA feature]
  176. ec 00 00 00 00 00 a0 08 1d+22:00:33.880 IDENTIFY DEVICE
  177. ef 03 46 00 00 00 a0 08 1d+22:00:33.880 SET FEATURES [Set transfer mode]
  178. ef 10 02 00 00 00 a0 08 1d+22:00:33.879 SET FEATURES [Enable SATA feature]
  179. ec 00 00 00 00 00 a0 08 1d+22:00:33.879 IDENTIFY DEVICE
  180.  
  181. SMART Self-test log structure revision number 1
  182. No self-tests have been logged. [To run self-tests, use: smartctl -t]
  183.  
  184. SMART Selective self-test log data structure revision number 1
  185. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  186. 1 0 0 Not_testing
  187. 2 0 0 Not_testing
  188. 3 0 0 Not_testing
  189. 4 0 0 Not_testing
  190. 5 0 0 Not_testing
  191. Selective self-test flags (0x0):
  192. After scanning selected spans, do NOT read-scan remainder of disk.
  193. If Selective self-test is pending on power-up, resume after 0 minute delay.
  194.  
  195.  
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!