API tools faq
paste
Guest User

Untitled

a guest
Apr 16th, 2026
23
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 15.80 KB | None | 0 0
raw download clone embed print report
  1. [HW] Version: Branch: limesuiteng-integration Abrev. Hash: d948c2962f Date: Mon Jan 26 18:46:49 2026 +0200
  2. [GNB_APP] Initialized RAN Context: RC.nb_nr_inst = 1, RC.nb_nr_macrlc_inst = 1, RC.nb_nr_L1_inst = 1, RC.nb_RU = 1, RC.nb_nr_CC[0] = 1
  3. [NR_PHY] Initializing gNB RAN context: RC.nb_nr_L1_inst = 1
  4. [NR_PHY] Registered with MAC interface module (0x56384f8d88a0)
  5. [NR_PHY] Initializing NR L1: RC.nb_nr_L1_inst = 1
  6. [NR_PHY] L1_RX_THREAD_CORE -1 (15)
  7. [NR_PHY] TX_AMP = 519 (-36 dBFS)
  8. [PHY] No prs_config configuration found..!!
  9. [GNB_APP] pdsch_AntennaPorts N1 1 N2 1 XP 1 pusch_AntennaPorts 1
  10. [GNB_APP] minTXRXTIME 2
  11. [GNB_APP] CSI-RS 1, SRS 1, report type 0 (ssb_rsrp), 256 QAM may be on, delta_MCS off, maxMIMO_Layers -1, HARQ feedback enabled, num DLHARQ:16, num ULHARQ:16
  12. [GNB_APP] No RedCap configuration found
  13. [GNB_APP] No PTRS configuration found
  14. [GNB_APP] sr_ProhibitTimer 0, sr_TransMax 64, sr_ProhibitTimer_v1700 0, t300 400, t301 400, t310 2000, n310 10, t311 3000, n311 1, t319 400
  15. [NR_MAC] Candidates per PDCCH aggregation level on UESS: L1: 0, L2: 2, L4: 0, L8: 0, L16: 0
  16. [RRC] Read in ServingCellConfigCommon (PhysCellId 0, ABSFREQSSB 636672, DLBand 78, ABSFREQPOINTA 636060, DLBW 51,RACH_TargetReceivedPower -96
  17. [RRC] absoluteFrequencySSB 636672 corresponds to 3550080000 Hz
  18. [NR_MAC] TDD period index = 6, based on the sum of dl_UL_TransmissionPeriodicity from Pattern1 (5.000000 ms) and Pattern2 (0.000000 ms): Total = 5.000000 ms
  19. [UTIL] threadCreate() for MAC_STATS: creating thread with affinity ffffffff, priority 2
  20. [NR_MAC] PUSCH Target 200, PUCCH Target 200, PUCCH Failure 10, PUSCH Failure 10
  21. [NR_PHY] Copying 0 blacklisted PRB to L1 context
  22. [NR_MAC] Set TX antenna number to 1, Set RX antenna number to 1 (num ssb 1: 80000000,0)
  23. [NR_MAC] TDD period index = 6, based on the sum of dl_UL_TransmissionPeriodicity from Pattern1 (5.000000 ms) and Pattern2 (0.000000 ms): Total = 5.000000 ms
  24. [NR_MAC] Set TDD configuration period to: 8 DL slots, 3 UL slots, 10 slots per period (NR_TDD_UL_DL_Pattern is 7 DL slots, 2 UL slots, 6 DL symbols, 4 UL symbols)
  25. [NR_MAC] Configured 1 TDD patterns (total slots: pattern1 = 10, pattern2 = 0)
  26. [NR_PHY] Set TDD Period Configuration: 2 periods per frame, 20 slots to be configured (8 DL, 3 UL)
  27. [NR_PHY] TDD period configuration: slot 0 is DOWNLINK
  28. [NR_PHY] TDD period configuration: slot 1 is DOWNLINK
  29. [NR_PHY] TDD period configuration: slot 2 is DOWNLINK
  30. [NR_PHY] TDD period configuration: slot 3 is DOWNLINK
  31. [NR_PHY] TDD period configuration: slot 4 is DOWNLINK
  32. [NR_PHY] TDD period configuration: slot 5 is DOWNLINK
  33. [NR_PHY] TDD period configuration: slot 6 is DOWNLINK
  34. [NR_PHY] TDD period configuration: slot 7 is FLEXIBLE: DDDDDDFFFFUUUU
  35. [NR_PHY] TDD period configuration: slot 8 is UPLINK
  36. [NR_PHY] TDD period configuration: slot 9 is UPLINK
  37. [NR_MAC] Command line parameters for OAI UE: -C 3550080000 -r 51 --numerology 1 --band 78 --ssb 186
  38. [NR_PHY] dlfreq:3550080 ulfreq:3550080 deltaduplex:0 khz, uldl_min_offset:0 khz
  39. [NR_PHY] dlfreq:3550080 ulfreq:3550080 deltaduplex:0 khz, uldl_min_offset:0 khz
  40. [NR_PHY] dlfreq:3550080 ulfreq:3550080 deltaduplex:0 khz, uldl_min_offset:0 khz
  41. [NR_PHY] dlfreq:3550080 ulfreq:3550080 deltaduplex:0 khz, uldl_min_offset:0 khz
  42. [NR_PHY] dlfreq:3550080 ulfreq:3550080 deltaduplex:0 khz, uldl_min_offset:0 khz
  43. [NR_PHY] dlfreq:3550080 ulfreq:3550080 deltaduplex:0 khz, uldl_min_offset:0 khz
  44. DL frequency 3550080000: band 78, UL frequency 3550080000
  45. [PHY] DL frequency 3550080000 Hz, UL frequency 3550080000 Hz: band 78, uldl offset 0 Hz
  46. [PHY] Initializing frame parms for mu 1, N_RB 51, Ncp 0
  47. [PHY] Init: N_RB_DL 51, first_carrier_offset 718, nb_prefix_samples 72,nb_prefix_samples0 88, ofdm_symbol_size 1024
  48. [NR_MAC] TDA index 0: start 0 length 13 k2 2
  49. [NR_MAC] TDA index 1: start 0 length 12 k2 2
  50. [NR_MAC] TDA index 2: start 10 length 3 k2 2
  51. [NR_RRC] SIB1 freq: offsetToPointA 30
  52. [GNB_APP] F1AP: gNB idx 0 gNB_DU_id 3584, gNB_DU_name gNB-OAI, TAC 1 MCC/MNC/length 240/99/2 cellID 305419896
  53. [GNB_APP] ngran_DU: Configuring Cell 0 for TDD
  54. [GNB_APP] SDAP layer is disabled
  55. [GNB_APP] Data Radio Bearer count 1
  56. [GNB_APP] Parsed IPv4 address for NG AMF: 192.168.70.129
  57. [UTIL] threadCreate() for TASK_SCTP: creating thread with affinity ffffffff, priority 50
  58. [X2AP] X2AP is disabled.
  59. [UTIL] threadCreate() for TASK_NGAP: creating thread with affinity ffffffff, priority 50
  60. [UTIL] threadCreate() for TASK_RRC_GNB: creating thread with affinity ffffffff, priority 50
  61. [NGAP] Starting NGAP layer
  62. [RRC] Received message NGAP_REGISTER_GNB_REQ
  63. [NGAP] Registered new gNB[0] and macro gNB id 3584
  64. [NGAP] [gNB 0] check the amf registration state
  65. [GTPU] Configuring GTPu
  66. [GTPU] SA mode
  67. [GTPU] Configuring GTPu address : 192.168.70.129, port : 2152
  68. [GTPU] Initializing UDP for local address 192.168.70.129 with port 2152
  69. [NR_RRC] Entering main loop of NR_RRC message task
  70. [GTPU] Created gtpu instance id: 90
  71. [UTIL] threadCreate() for GTPrx_90: creating thread with affinity ffffffff, priority 50
  72. [RRC] Received message SCTP_NEW_ASSOCIATION_RESP
  73. [NGAP] Send NGSetupRequest to AMF
  74. [NGAP] 3584 -> 0000e000
  75. [RRC] Received message SCTP_DATA_IND
  76. [NGAP] Served GUAMIs for AMF OAI-AMF (assoc_id=60):
  77. [NGAP] GUAMI:
  78. [NGAP] PLMN: MCC=240, MNC=99
  79. [NGAP] AMF Region ID: 1
  80. [NGAP] AMF Set ID: 1
  81. [NGAP] AMF Pointer: 1
  82. [NGAP] Supported PLMN 0: MCC=240 MNC=99
  83. [NGAP] Supported slice (PLMN 0): SST=0x01 SD=000
  84. [NGAP] Received NGSetupResponse from AMF
  85. [UTIL] threadCreate() for TASK_GNB_APP: creating thread with affinity ffffffff, priority 50
  86. [NR_RRC] Accepting new CU-UP ID 3584 name gNB-OAI (assoc_id -1)
  87. [UTIL] threadCreate() for TASK_GTPV1_U: creating thread with affinity ffffffff, priority 50
  88. [GNB_APP] [gNB 0] Received NGAP_REGISTER_GNB_CNF: associated AMF 1
  89. [NR_RRC] Received F1 Setup Request from gNB_DU 3584 (gNB-OAI) on assoc_id -1
  90. [NR_RRC] Accepting DU 3584 (gNB-OAI), sending F1 Setup Response
  91. [NR_RRC] DU uses RRC version 17.3.0
  92. [MAC] received F1 Setup Response from CU (null)
  93. [MAC] CU uses RRC version 17.3.0
  94. [MAC] Clearing the DU's UE states before, if any.
  95. [NR_RRC] cell PLMN 240.99 Cell ID 305419896 is in service
  96. [MAC] received gNB-DU configuration update acknowledge
  97. [UTIL] threadCreate() for time source realtime: creating thread with affinity ffffffff, priority 2
  98. [UTIL] time manager configuration: [time source: reatime] [mode: standalone] [server IP: 127.0.0.1} [server port: 7374] (server IP/port not used)
  99. [PHY] RU clock source set as internal
  100. [PHY] number of L1 instances 1, number of RU 1, number of CPU cores 12
  101. [PHY] Initialized RU proc 0 (,synch_to_ext_device),
  102. [PHY] RU thread-pool core string -1,-1 (size 2)
  103. [UTIL] threadCreate() for Tpool0_-1: creating thread with affinity ffffffff, priority 97
  104. [UTIL] threadCreate() for Tpool1_-1: creating thread with affinity ffffffff, priority 97
  105. [HW] [nr-softmodem.c] RU threads created
  106. [UTIL] threadCreate() for ru_thread: creating thread with affinity ffffffff, priority 97
  107. [PHY] Starting RU 0 (,synch_to_ext_device) on cpu 1
  108. [PHY] Initializing frame parms for mu 1, N_RB 51, Ncp 0
  109. [PHY] Init: N_RB_DL 51, first_carrier_offset 718, nb_prefix_samples 72,nb_prefix_samples0 88, ofdm_symbol_size 1024
  110. [PHY] fp->scs=30000
  111. [PHY] fp->ofdm_symbol_size=1024
  112. [PHY] fp->nb_prefix_samples0=88
  113. [PHY] fp->nb_prefix_samples=72
  114. [PHY] fp->slots_per_subframe=2
  115. [PHY] fp->samples_per_subframe_wCP=28672
  116. [PHY] fp->samples_per_frame_wCP=286720
  117. [PHY] fp->samples_per_subframe=30720
  118. [PHY] fp->samples_per_frame=307200
  119. [PHY] fp->dl_CarrierFreq=3550080000
  120. [PHY] fp->ul_CarrierFreq=3550080000
  121. [PHY] fp->Nid_cell=0
  122. [PHY] fp->first_carrier_offset=718
  123. [PHY] fp->ssb_start_subcarrier=0
  124. [PHY] fp->Ncp=0
  125. [PHY] fp->N_RB_DL=51
  126. [PHY] fp->numerology_index=1
  127. [PHY] fp->nr_band=78
  128. [PHY] fp->ofdm_offset_divisor=8
  129. [PHY] fp->threequarter_fs=0
  130. [PHY] fp->sl_CarrierFreq=0
  131. [PHY] fp->N_RB_SL=0
  132. [NR_PHY] nb_tx_streams 1, nb_rx_streams 1, num_Beams_period 1
  133. [PHY] Setting RF config for N_RB 51, NB_RX 1, NB_TX 1
  134. [PHY] tune_offset 0 Hz, sample_rate 30720000 Hz
  135. [PHY] Channel 0: setting tx_gain offset 0, tx_freq 3550080000 Hz
  136. [PHY] Channel 0: setting rx_gain offset 75, rx_freq 3550080000 Hz
  137. [HW] rf-config-file: /home/redferne/code/openairinterface5g/radio/LMSSDR/LimeSDR_redferne.cfg
  138. [HW] cwd: /home/redferne/code/openairinterface5g/radio/LMSSDR
  139. [HW] Available devices:
  140. [HW] "LimeSDR-USB, media=USB3.0, addr=1d50:6108, serial=0009062000C5180D"
  141. [HW] Connected: LimeSDR-USB, media=USB3.0, addr=1d50:6108, serial=0009062000C5180D
  142. [HW] dev0 chip0 loaded with: /home/redferne/code/openairinterface5g/radio/LMSSDR/LimeSDR_above_1p8GHz_1v4.ini
  143. [HW] Rx channel0: dev0 chip0 ch0 , LO: 3550.080 MHz SR: 30.720 MHz BW: 20.000 MHz | path: 1('LNAH')
  144. [HW] Tx channel0: dev0 chip0 ch0 , LO: 3550.080 MHz SR: 30.720 MHz BW: 20.000 MHz | path: 1('Band1')
  145. [HW] dev0 configure.
  146. [HW] Set Rx LO frequency (3550080000 Hz)
  147. [HW] SX VCO:7100160000 Hz, RefClk:30720000 Hz, INT:111, FRAC:589824, DIV_LOCH:0, EN_DIV2_DIVPROG:1
  148. [HW] Tuning Rx VCOH (ICT_VCO:255):
  149. [HW] TuneVCO(SXR) - searching interval [0:128]
  150. [HW] binary search:
  151. [HW] csw=64 cmphl=0
  152. [HW] csw=96 cmphl=0
  153. [HW] csw=112 cmphl=0
  154. [HW] csw=120 cmphl=0
  155. [HW] csw=124 cmphl=0
  156. [HW] csw=126 cmphl=0
  157. [HW] csw=127 cmphl=0
  158. [HW] adjust with linear search:
  159. [HW] CSW interval failed to lock
  160. [HW] TuneVCO(SXR) - searching interval [128:256]
  161. [HW] binary search:
  162. [HW] csw=192 cmphl=3
  163. [HW] csw=160 cmphl=3
  164. [HW] csw=144 cmphl=2
  165. [HW] csw=152 cmphl=2
  166. [HW] csw=156 cmphl=2
  167. [HW] csw=158 cmphl=2
  168. [HW] csw=159 cmphl=2
  169. [HW] adjust with linear search:
  170. [HW] csw=143 cmphl=0
  171. [HW] CSW: lowest=144, highest=159, will use=151
  172. [HW] choosing wider CSW locking range: low=144, high=159
  173. [HW] TuneVCO(SXR) - confirmed lock with final csw=151, cmphl=2
  174. [HW] VCOH : csw=151 tune ok
  175. [HW] Selected: VCOH, CSW_VCO: 151
  176. [HW] Set Tx LO frequency (3550080000 Hz)
  177. [HW] SX VCO:7100160000 Hz, RefClk:30720000 Hz, INT:111, FRAC:589824, DIV_LOCH:0, EN_DIV2_DIVPROG:1
  178. [HW] Tuning Tx VCOH (ICT_VCO:255):
  179. [HW] TuneVCO(SXT) - searching interval [0:128]
  180. [HW] binary search:
  181. [HW] csw=64 cmphl=0
  182. [HW] csw=96 cmphl=0
  183. [HW] csw=112 cmphl=0
  184. [HW] csw=120 cmphl=0
  185. [HW] csw=124 cmphl=0
  186. [HW] csw=126 cmphl=0
  187. [HW] csw=127 cmphl=0
  188. [HW] adjust with linear search:
  189. [HW] CSW interval failed to lock
  190. [HW] TuneVCO(SXT) - searching interval [128:256]
  191. [HW] binary search:
  192. [HW] csw=192 cmphl=3
  193. [HW] csw=160 cmphl=3
  194. [HW] csw=144 cmphl=2
  195. [HW] csw=152 cmphl=2
  196. [HW] csw=156 cmphl=2
  197. [HW] csw=158 cmphl=2
  198. [HW] csw=159 cmphl=2
  199. [HW] adjust with linear search:
  200. [HW] csw=143 cmphl=0
  201. [HW] CSW: lowest=144, highest=159, will use=151
  202. [HW] choosing wider CSW locking range: low=144, high=159
  203. [HW] TuneVCO(SXT) - confirmed lock with final csw=151, cmphl=2
  204. [HW] VCOH : csw=151 tune ok
  205. [HW] Selected: VCOH, CSW_VCO: 151
  206. [HW] lms7002m_set_rx_lpf: bandwidth(20000000): TIA_C=242, TIA_RCOMP=11, TIA_CCOMP=2, RX_L_C=59, RX_H_C=255
  207.  
  208. [HW] lms7002m_set_tx_lpf: bandwidth(20000000): LAD=140, H=0
  209.  
  210. [HW] Custom .ini configuration file is loaded, SetTxLPF will not calibrate CG_IAMP_TBB
  211. [HW] lms7002m_set_rx_lpf: RxLPF bypassed
  212. [HW] lms7002m_set_tx_lpf: TxLPF bypassed.
  213. [HW] Custom .ini configuration file is loaded, SetTxLPF will not calibrate CG_IAMP_TBB
  214. [HW] Sampling rate set(30.720 MHz): CGEN:491.520 MHz, Decim: 2^2, Interp: 2^2
  215. [HW] INT 63, FRAC 0, DIV_OUTCH_CGEN 1
  216. [HW] CGEN_VCO 0 Hz, RefClk 30720000 Hz
  217. [HW] FPGA::SetInterfaceFreq tx:61.440 MHz rx:61.440 MHz channel:0
  218. [HW] FPGA SetPllFrequency: PLL[1] input:61.440 MHz clockCount:2
  219. [HW] CLK[0] Fout:61.440 MHz bypass:0 phase:165.646 findPhase: 0
  220. [HW] CLK[1] Fout:61.440 MHz bypass:0 phase:165.646 findPhase: 1
  221. [HW] FPGA PLL[1] M=20, N=1, Fvco=1228.800 MHz (Requested 1228.800 MHz)
  222. [HW] FPGA SetPllFrequency: PLL[0] input:61.440 MHz clockCount:2
  223. [HW] CLK[0] Fout:61.440 MHz bypass:0 phase:106.26 findPhase: 0
  224. [HW] CLK[1] Fout:61.440 MHz bypass:0 phase:106.26 findPhase: 1
  225. [HW] FPGA PLL[0] M=20, N=1, Fvco=1228.800 MHz (Requested 1228.800 MHz)
  226. [HW] FPGA::SetInterfaceFreq tx:61.440 MHz rx:61.440 MHz channel:0
  227. [HW] FPGA SetPllFrequency: PLL[1] input:61.440 MHz clockCount:2
  228. [HW] CLK[0] Fout:61.440 MHz bypass:0 phase:165.646 findPhase: 0
  229. [HW] CLK[1] Fout:61.440 MHz bypass:0 phase:165.646 findPhase: 1
  230. [HW] FPGA PLL[1] M=20, N=1, Fvco=1228.800 MHz (Requested 1228.800 MHz)
  231. [HW] FPGA SetPllFrequency: PLL[0] input:61.440 MHz clockCount:2
  232. [HW] CLK[0] Fout:61.440 MHz bypass:0 phase:106.26 findPhase: 0
  233. [HW] CLK[1] Fout:61.440 MHz bypass:0 phase:106.26 findPhase: 1
  234. [HW] FPGA PLL[0] M=20, N=1, Fvco=1228.800 MHz (Requested 1228.800 MHz)
  235. [HW] chip0 ch0 Rx gain set LNA:15, PGA:21
  236. [HW] chip0 ch0 Tx gain set MAIN:0, LIN:0
  237. [HW] LimeSDR: resetting USB FIFO
  238. [HW] FPGA: StopStreaming
  239. [HW] FPGA: StopWaveformPlayback
  240. [HW] FPGA: ResetPacketCounters
  241. [HW] FPGA: ResetTimestamp
  242. [HW] USB ep:81 Rx0 Setup: usePoll:1 rxSamplesInPkt:1360 rxPacketsInBatch:2, DMA_ReadSize:8192, link:I12, batchSizeInTime:88.5417us FS:30720000.000000, FIFO=5647*1360
  243.  
  244. [HW] RxSetup wait for Rx worker thread.
  245. [HW] Rx worker thread ready.
  246. [HW] Tx0 Setup: samplesInTxPkt:1360 maxTxPktInBatch:11, batchSizeInTime:486.979us
  247. [HW] TxSetup wait for Tx worker.
  248. [HW] Tx worker thread ready.
  249. [HW] Port[0] Stream samples format: I12 , link: I12
  250. [HW] [RAU] has loaded LMSSDR device.
  251. [PHY] RU 0 Setting N_TA_offset to 400 samples (UL Freq 3540900, N_RB 51, mu 1)
  252. [PHY] Signaling main thread that RU 0 is ready, sl_ahead 6
  253. [PHY] L1 configured without analog beamforming
  254. [PHY] Attaching RU 0 antenna 0 to gNB antenna 0
  255. [UTIL] threadCreate() for Tpool0_-1: creating thread with affinity ffffffff, priority 97
  256. [UTIL] threadCreate() for Tpool1_-1: creating thread with affinity ffffffff, priority 97
  257. [UTIL] threadCreate() for Tpool2_-1: creating thread with affinity ffffffff, priority 97
  258. [UTIL] threadCreate() for Tpool3_-1: creating thread with affinity ffffffff, priority 97
  259. [UTIL] threadCreate() for Tpool4_-1: creating thread with affinity ffffffff, priority 97
  260. [UTIL] threadCreate() for Tpool5_-1: creating thread with affinity ffffffff, priority 97
  261. [UTIL] threadCreate() for Tpool6_-1: creating thread with affinity ffffffff, priority 97
  262. [UTIL] threadCreate() for Tpool7_-1: creating thread with affinity ffffffff, priority 97
  263. [UTIL] threadCreate() for L1_rx_thread: creating thread with affinity ffffffff, priority 97
  264. [UTIL] threadCreate() for L1_tx_thread: creating thread with affinity ffffffff, priority 97
  265. [UTIL] threadCreate() for L1_stats: creating thread with affinity ffffffff, priority 1
  266. TYPE <CTRL-C> TO TERMINATE
  267. [PHY] got sync (L1_stats_thread)
  268. [PHY] got sync (ru_thread)
  269. [HW] FPGA: StartStreaming
  270. [PHY] RU 0 rf device ready
  271. [PHY] RU 0 RF started cpu_meas_enabled 0
  272. [HW] Rx receive loop start.
  273. [HW] Tx transmit loop start.
  274. [PHY] Command line parameters for OAI UE: -C 3550080000 -r 51 --numerology 1 --ssb 186
  275. [HW] USB ep:81 Rx0: 92.529 MB/s | TS:30718320 pkt:22588 o:0(+0) l:0(+0) dma:11294/11295(+1) swFIFO:0
  276. [HW] USB ep:01 Tx0: 68.707 MB/s | TS:30796800 pkt:16998 u:0(+0) l:0(+0) dma:1595/1600(+5) tsAdvance:+2104/+2303/+2489us, f:0
  277. [NR_MAC] Frame.Slot 128.0
  278.  
  279. [HW] USB ep:81 Rx0: 92.520 MB/s | TS:61440720 pkt:45178 o:0(+0) l:0(+0) dma:22589/22589(+0) swFIFO:1
  280. [HW] USB ep:01 Tx0: 68.986 MB/s | TS:61532160 pkt:34009 u:0(+0) l:0(+0) dma:3196/3201(+5) tsAdvance:+2164/+2312/+2489us, f:0
  281. [NR_MAC] Frame.Slot 256.0
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!