API tools faq
paste
Advertisement
ciusss89

BOOTLOG

ciusss89
Oct 2nd, 2017
754
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
Bash 8.27 KB | None | 0 0
raw download clone embed print report
  1. OpenWrt kernel loader for AR7XXX/AR9XXX
  2. Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
  3. Decompressing kernel... done!
  4. Starting kernel at 80060000...
  5.  
  6. [    0.000000] Linux version 4.4.89 (giuseppe@vaio) (gcc version 5.4.0 (LEDE GCC 5.4.0 r4940-00e9a7aacb66) ) #0 Fri Sep 29 10:32:44 2017
  7. [    0.000000] bootconsole [early0] enabled
  8. [    0.000000] CPU0 revision is: 00019750 (MIPS 74Kc)
  9. [    0.000000] SoC: Qualcomm Atheros QCA9556 ver 1 rev 0
  10. [    0.000000] Determined physical RAM map:
  11. [    0.000000]  memory: 04000000 @ 00000000 (usable)
  12. [    0.000000] User-defined physical RAM map:
  13. [    0.000000]  memory: 04000000 @ 00000000 (usable)
  14. [    0.000000] Initrd not found or empty - disabling initrd
  15. [    0.000000] No valid device tree found, continuing without
  16. [    0.000000] Zone ranges:
  17. [    0.000000]   Normal   [mem 0x0000000000000000-0x0000000003ffffff]
  18. [    0.000000] Movable zone start for each node
  19. [    0.000000] Early memory node ranges
  20. [    0.000000]   node   0: [mem 0x0000000000000000-0x0000000003ffffff]
  21. [    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
  22. [    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
  23. [    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
  24. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
  25. [    0.000000] Kernel command line: no-uart no-nand parts=1 boot_part_size=16777216 gpio=537917997 HZ=360000000 mem=64M kmac=E4:8D:8C:BE:15:FB board=wapg-sc Board=wapg-sc hw_opt=00684001 boot=0 mlc=10 console=ttyS0,115200 rootfstype=squashfs noinitrd
  26. [    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
  27. [    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
  28. [    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
  29. [    0.000000] Writing ErrCtl register=00000000
  30. [    0.000000] Readback ErrCtl register=00000000
  31. [    0.000000] Memory: 57544K/65536K available (3317K kernel code, 167K rwdata, 816K rodata, 2476K init, 198K bss, 7992K reserved, 0K cma-reserved)
  32. [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  33. [    0.000000] NR_IRQS:51
  34. [    0.000000] Clocks: CPU:720.000MHz, DDR:600.000MHz, AHB:240.000MHz, Ref:40.000MHz
  35. [    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 5309056796 ns
  36. [    0.000007] sched_clock: 32 bits at 360MHz, resolution 2ns, wraps every 5965232126ns
  37. [    0.008678] Calibrating delay loop... 358.80 BogoMIPS (lpj=1794048)
  38. [    0.071709] pid_max: default: 32768 minimum: 301
  39. [    0.076945] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  40. [    0.084324] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  41. [    0.094391] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  42. [    0.105370] futex hash table entries: 256 (order: -1, 3072 bytes)
  43. [    0.112783] NET: Registered protocol family 16
  44. [    0.121564] MIPS: machine is MikroTik RouterBOARD wAP G-5HacT2HnD
  45. [    0.357756] clocksource: Switched to clocksource MIPS
  46. [    0.364543] NET: Registered protocol family 2
  47. [    0.370078] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
  48. [    0.377895] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  49. [    0.384990] TCP: Hash tables configured (established 1024 bind 1024)
  50. [    0.392160] UDP hash table entries: 256 (order: 0, 4096 bytes)
  51. [    0.398704] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  52. [    0.405921] NET: Registered protocol family 1
  53. [    2.682710] Crashlog allocated RAM at address 0x3f00000
  54. [    2.700631] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  55. [    2.707138] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  56. [    2.767616] io scheduler noop registered
  57. [    2.772040] io scheduler deadline registered (default)
  58. [    2.778004] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
  59. [    2.785444] console [ttyS0] disabled
  60. [    2.809503] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 2500000) is a 16550A
  61. [    2.819126] console [ttyS0] enabled
  62. [    2.819126] console [ttyS0] enabled
  63. [    2.826531] bootconsole [early0] disabled
  64. [    2.826531] bootconsole [early0] disabled
  65. [    2.837710] m25p80 spi0.0: found w25q128, expected m25p80
  66. [    2.843247] m25p80 spi0.0: w25q128 (16384 Kbytes)
  67. [    2.848033] Creating 6 MTD partitions on "spi0.0":
  68. [    2.852897] 0x000000000000-0x00000000e000 : "routerboot"
  69. [    2.860397] 0x00000000e000-0x00000000f000 : "hard_config"
  70. [    2.867273] 0x00000000f000-0x000000010000 : "bios"
  71. [    2.873512] 0x000000010000-0x00000001f000 : "routerboot2"
  72. [    2.880403] 0x00000001f000-0x000000020000 : "soft_config"
  73. [    2.887237] 0x000000020000-0x000001000000 : "firmware"
  74. [    2.947538] libphy: GPIO Bitbanged MDIO: probed
  75. [    3.618462] ag71xx ag71xx.1: connected to PHY at gpio-1:00 [uid=004dd074, driver=Atheros 8031/8033 ethernet]
  76. [    3.629029] eth0: Atheros AG71xx at 0xba000000, irq 5, mode:SGMII
  77. [    3.636632] NET: Registered protocol family 10
  78. [    3.643908] NET: Registered protocol family 17
  79. [    3.648537] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
  80. [    3.661454] 8021q: 802.1Q VLAN Support v1.8
  81. [    3.681639] Freeing unused kernel memory: 2476K
  82. [    3.697709] init: Console is alive
  83. [    3.701422] init: - watchdog -
  84. [    3.716801] kmodloader: loading kernel modules from /etc/modules-boot.d/*
  85. [    3.725922] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
  86. [    3.735863] init: - preinit -
  87. [    3.871923] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  88. Press the [f] key and hit [enter] to enter failsafe mode
  89. Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
  90. [    7.004852] procd: - early -
  91. [    7.008474] procd: - watchdog -
  92. [    7.549752] procd: - watchdog -
  93. [    7.553168] procd: - ubus -
  94. [    7.562167] random: ubusd: uninitialized urandom read (4 bytes read, 12 bits of entropy available)
  95. [    7.606315] random: ubusd: uninitialized urandom read (4 bytes read, 12 bits of entropy available)
  96. [    7.615898] random: ubusd: uninitialized urandom read (4 bytes read, 12 bits of entropy available)
  97. [    7.625134] random: ubusd: uninitialized urandom read (4 bytes read, 12 bits of entropy available)
  98. [    7.634503] random: ubusd: uninitialized urandom read (4 bytes read, 12 bits of entropy available)
  99. [    7.643668] random: ubusd: uninitialized urandom read (4 bytes read, 12 bits of entropy available)
  100. [    7.652987] random: ubusd: uninitialized urandom read (4 bytes read, 12 bits of entropy available)
  101. [    7.662289] random: ubusd: uninitialized urandom read (4 bytes read, 12 bits of entropy available)
  102. [    7.671795] procd: - init -
  103. Please press Enter to activate this console.
  104. [    7.810800] kmodloader: loading kernel modules from /etc/modules.d/*
  105. [    7.820910] ip6_tables: (C) 2000-2006 Netfilter Core Team
  106. [    7.834903] Loading modules backported from Linux version wt-2017-01-31-0-ge882dff19e7f
  107. [    7.843076] Backport generated by backports.git backports-20160324-13-g24da7d3c
  108. [    7.921570] ip_tables: (C) 2000-2006 Netfilter Core Team
  109. [    7.934012] nf_conntrack version 0.5.0 (937 buckets, 3748 max)
  110. [    7.980300] xt_time: kernel timezone is -0000
  111. [    7.996240] PPP generic driver version 2.4.2
  112. [    8.002724] NET: Registered protocol family 24
  113. [    8.043487] ieee80211 phy0: Atheros AR9550 Rev:0 mem=0xb8100000, irq=47
  114.  
  115.  
  116.  
  117. BusyBox v1.27.2 () built-in shell (ash)
  118.  
  119.      _________
  120.     /        /\      _    ___ ___  ___
  121.    /  LE    /  \    | |  | __|   \| __|
  122.   /    DE  /    \   | |__| _|| |) | _|
  123.  /________/  LE  \  |____|___|___/|___|                      lede-project.org
  124.  \        \   DE /
  125.   \    LE  \    /  -----------------------------------------------------------
  126.    \  DE    \  /    Reboot (SNAPSHOT, r4940+10-00e9a7aacb66)
  127.     \________\/    -----------------------------------------------------------
  128.  
  129. [    8.130022] kmodloader: done loading kernel modules from /etc/modules.d/*
  130. === WARNING! =====================================
  131. There is no root password defined on this device!
  132. Use the "passwd" command to set up a new password
  133. in order to prevent unauthorized SSH logins.
  134. --------------------------------------------------
  135. root@(none):/#
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!