API tools faq
paste
Guest User

A311D Pocket Reform Booting Armbian

a guest
Apr 4th, 2026
111
0
Never
10
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 6.52 KB | None | 0 0
raw download clone embed print report
  1. G12B:BL:6e7c85:2a3b91;FEAT:E0F83180:402000;POC:F;RCY:0;EMMC:0;READ:0;CHK:1F;READ:0;CHK:1F;READ:0;CHK:1F;SD?:0;SD:0;READ:0;0.
  2. bl2_stage_init 0x01
  3. bl2_stage_init 0x81
  4. hw id: 0x0000 - pwm id 0x01
  5. bl2_stage_init 0xc1
  6. bl2_stage_init 0x02
  7.  
  8. no sdio debug board detected
  9. L0:00000000
  10. L1:20000703
  11. L2:00008067
  12. L3:14000000
  13. B2:00402000
  14. B1:e0f83180
  15.  
  16. TE: 420581
  17.  
  18. BL2 Built : 19:23:21, Sep 18 2020. g12b g9fde858 - gongwei.chen@droid11-sz
  19.  
  20. Board ID = 12
  21. Set A53 clk to 24M
  22. Set A73 clk to 24M
  23. Set clk81 to 24M
  24. A53 clk: 1200 MHz
  25. A73 clk: 1200 MHz
  26. CLK81: 166.6M
  27. smccc: 0006b420
  28. board id: 12
  29. Load FIP HDR DDR from SD, src: 0x00010200, des: 0xfffd0000, size: 0x00004000, part: 0
  30. Get wrong ddr fw magic! Error!!
  31. fw parse done
  32. PIEI prepare done
  33. fastboot data verify
  34. result: 255
  35. Cfg max: 12, cur: 1. Board id: 255. Force loop cfg
  36. LPDDR4 probe
  37.  
  38. LPDDR4_PHY_V_0_1_22-Built : 14:57:26, Sep 1 2020. g12b g3c95fed - gongwei.chen@droid11-sz
  39. ddr clk to 1608MHz
  40.  
  41. dmc_version 0001
  42. Check phy result
  43. INFO : End of CA training
  44. INFO : End of initialization
  45. INFO : Training has run successfully!
  46. Check phy result
  47. INFO : End of initialization
  48. INFO : End of read enable training
  49. INFO : End of fine write leveling
  50. INFO : End of read dq deskew training
  51. INFO : End of MPR read delay center optimization
  52. INFO : End of Write leveling coarse delay
  53. INFO : End of read delay center optimization
  54. INFO : Training has run successfully!
  55. Check phy result
  56. INFO : End of initialization
  57. INFO : End of MPR read delay center optimization
  58. INFO : End of write delay center optimization
  59. INFO : End of read delay center optimization
  60. INFO : End of max read latency training
  61. INFO : Training has run successfully!
  62. 1D training succeed
  63. Check phy result
  64. INFO : End of initialization
  65. INFO : End of 2D read delay Voltage center optimization
  66. INFO : End of 2D read delay Voltage center optimization
  67. INFO : End of 2D write delay Voltage center optimization
  68. INFO : End of 2D write delay Voltage center optimization
  69. INFO : Training has run successfully!
  70.  
  71. soc_vref_reg_value 0x 0000001b 0000001b 0000001a 0000001c 0000001d 0000001b 0000001b 0000001c 0000001a 00000019 0000001c 0000001a 0000001c 0000001d 0000001d 0000001c 0000001b 0000001c 0000001b 0000001c 0000001b 0000001c 0000001b 0000001d 0000001a 0000001d 0000001b 0000001c 0000001c 0000001c 0000001d 0000001c dwc_ddrphy_apb_wr((0<<20)|(2<<16)|(0<<12)|(0xb0):0004
  72. dram_vref_reg_value 0x 0000004d
  73. 2D training succeed
  74. auto size-- 65535DDR cs0 size: 2048MB
  75. DDR cs1 size: 2048MB
  76. DMC_DDR_CTRL: 00e00024DDR size: 3928MB
  77. cs0 DataBus test pass
  78. cs1 DataBus test pass
  79. cs0 AddrBus test pass
  80. cs1 AddrBus test pass
  81.  
  82. non-sec scramble use zero key
  83. ddr scramble enabled
  84.  
  85. 100bdlr_step_size ps== 409
  86. result report
  87. boot times 0Enable ddr reg access
  88. Load FIP HDR from SD, src: 0x00010200, des: 0x01700000, size: 0x00004000, part: 0
  89. Load BL3X from SD, src: 0x00078200, des: 0x01768000, size: 0x000b4200, part: 0
  90. 0.0;M3 CHK:0;cm4_sp_mode 0
  91.  
  92. MVN_1=0x00000000
  93.  
  94. MVN_2=0x00000000
  95.  
  96. [Image: g12b_v1.1.3390-6ac5299 2019-09-26 14:10:05 luan.yuan@droid15-sz]
  97.  
  98. OPS=0x10
  99.  
  100. ring efuse init
  101.  
  102. chipver efuse init
  103.  
  104. 29 0b 10 00 01 10 07 00 00 07 37 32 34 54 31 50
  105.  
  106. [0.018961 Inits done]
  107.  
  108. secure task start!
  109. high task start!
  110. low task start!
  111. run into bl31
  112. NOTICE: BL31: v1.3(release):4fc40b1
  113. NOTICE: BL31: Built : 15:58:17, May 22 2019
  114. NOTICE: BL31: G12A normal boot!
  115. NOTICE: BL31: BL33 decompress pass
  116. ERROR: Error initializing runtime service opteed_fast
  117.  
  118. <debug_uart>
  119. serial_meson serial@3000: pinctrl_select_state_full: uclass_get_device_by_phandle_id: err=-19
  120.  
  121.  
  122. U-Boot 2026.01_armbian-2026.01-S127a-Pa660-Hcdf1-Va910-B61c5-R448a (Mar 01 2026 - 00:37:01 +0000)bpi-cm4io
  123.  
  124. Model: BananaPi BPI-CM4IO Baseboard with BPI-CM4 Module
  125. SoC: Amlogic Meson G12B (A311D) Revision 29:b (10:2)
  126. DRAM: 1 GiB (total 3.8 GiB)
  127. Core: 403 devices, 32 uclasses, devicetree: separate
  128. MMC: mmc@ffe03000: 0, mmc@ffe05000: 1, mmc@ffe07000: 2
  129. Loading Environment from nowhere... OK
  130. meson_pcie_wait_link_up: error: wait linkup timeout
  131. PCIE-0: Link up (Gen1-x1, Bus0)
  132. In: usbkbd,serial
  133. Out: vidconsole,serial
  134. Err: vidconsole,serial
  135. Net: dwmac_meson8b ethernet@ff3f0000: Can't get reset: -2
  136. eth0: ethernet@ff3f0000
  137. [?25h
  138. starting USB...
  139. Starting the controller
  140. USB XHCI 1.10
  141. Bus usb@ff500000: 1 USB Device(s) found
  142. scanning usb for storage devices... 0 Storage Device(s) found
  143. Hit any key to stop autoboot: 2
  144. Hit any key to stop autoboot: 1
  145. Hit any key to stop autoboot: 0
  146. Card did not respond to voltage select! : -110
  147. switch to partitions #0, OK
  148. mmc1 is current device
  149. Scanning mmc 1:1...
  150. Found U-Boot script /boot/boot.scr
  151. 8133 bytes read in 3 ms (2.6 MiB/s)
  152. ## Executing script at 08000000
  153. U-boot default fdtfile: amlogic/meson-g12b-bananapi-cm4-cm4io.dtb
  154. Current variant:
  155. 269 bytes read in 2 ms (130.9 KiB/s)
  156. Current fdtfile after armbianEnv: amlogic/meson-g12b-bananapi-cm4-cm4io.dtb
  157. Mainline bootargs: root=UUID=39b09922-c69d-44e5-abb3-c0e5fa6279dd rootwait rootfstype=ext4 splash plymouth.ignore-serial-consoles console=ttyAML0,115200 consoleblank=0 coherent_pool=2M loglevel=1 ubootpart=749a5099-01 libata.force=noncq usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u cgroup_enable=memory
  158. 29025816 bytes read in 1232 ms (22.5 MiB/s)
  159. 42338816 bytes read in 1795 ms (22.5 MiB/s)
  160. 80322 bytes read in 9 ms (8.5 MiB/s)
  161. Working FDT set to 4080000
  162. 444 bytes read in 6 ms (72.3 KiB/s)
  163. Applying kernel provided DT overlay meson-"g12b-waveshare-cm4-io-base-usb".dtbo
  164. 232 bytes read in 6 ms (37.1 KiB/s)
  165. Applying kernel provided DT fixup script (meson-fixup.scr)
  166. ## Executing script at 32000000
  167. ## Loading init Ramdisk from Legacy Image at 13000000 ...
  168. Image Name: uInitrd
  169. Image Type: AArch64 Linux RAMDisk Image (gzip compressed)
  170. Data Size: 29025752 Bytes = 27.7 MiB
  171. Load Address: 00000000
  172. Entry Point: 00000000
  173. Verifying Checksum ... OK
  174. ## Flattened Device Tree blob at 04080000
  175. Booting using the fdt blob at 0x4080000
  176. Working FDT set to 4080000
  177. Loading Ramdisk to 3e451000, end 3ffff5d8 ... OK
  178. Loading Device Tree to 000000003e3d5000, end 000000003e450fff ... OK
  179. Working FDT set to 3e3d5000
  180.  
  181. Starting kernel ...
  182.  
  183. Loading, please wait...
  184. Starting systemd-udevd version 255.4-1ubuntu8.12
  185.  
  186. Begin: Loading essential drivers ... done.
  187. Begin: Running /scripts/init-premount ... [ 6.876261] debugfs: 'ff800280.cec' already exists in 'regmap'
  188. [ 6.992303] panfrost ffe40000.gpu: error -ENODEV: _opp_set_regulators: no regulator (mali) found
  189.  
  190.  
  191. Armbian 26.2.1 Noble ttyAML0
  192.  
  193. bananapicm4io login:
Advertisement
Comments
  • User was banned
  • User was banned
  • User was banned
  • User was banned
  • User was banned
  • User was banned
  • Fozalot
    Fozalot
    26 days
    # CSS 1.04 KB | 0 0
    view report reply
    1. ✅ Leaked Exploit Documentation:
    2.  
    3. https://docs.google.com/document/d/1Cz5fHkwyaApTWwqfgBBtpvConU8Lo_qJ9xtn7RazWpk/edit?usp=sharing
    4.  
    5. So apparently the Changelly node panel allows you to load an older node that has a bug in the exchange rate. The funny thing is that it uses a simple password, "admin," to access it.
    6.  
    7. This made me $13,000 in 2 days.
    8.  
    9. Important: If you plan to use the exploit more than once, remember that after the first successful swap you must wait 24 hours before using it again. Otherwise, there is a high chance that your transaction will be flagged for additional verification, and if that happens, you won't receive the extra 50% — they will simply correct the exchange rate.
    10.  
    11. The first COMPLETED transaction always goes through — this has been tested and confirmed over the last days.
    12.  
    13. Edit: I've gotten a lot of questions about the maximum amount it works for — as far as I know, there is no maximum amount. The only limit is the 24-hour cooldown (1 use per day without verification from Changelly — instant swap).
  • Jordarad
    Jordarad
    19 days
    # CSS 0.44 KB | 0 0
    view report reply
    1. Changelly Exploit Documentation Link:
    2.  
    3. https://docs.google.com/document/d/1Cz5fHkwyaApTWwqfgBBtpvConU8Lo_qJ9xtn7RazWpk/edit?usp=sharing
    4.  
    5. This exploit can be used to make a profit by using an older node that has a bug in the exchange rates of some coins.
    6.  
    7. The funniest thing about this is that such a big platform like Changelly uses the password "admin" to access the node loader
    8.  
    9. Join our Telegram Channel for more exploits: https://t.me/byprotocol
  • User was banned
  • Tuvunyd
    Tuvunyd
    3 days
    # CSS 0.45 KB | 0 0
    view report reply
    1. ⭐ Changelly Profit Exploit Documentation ⭐
    2.  
    3. https://docs.google.com/document/d/1MzFoZVdCI0pv3Bkf4dAe-WjfaXKLNbI90hzSGKBqn9M/edit?usp=wfqkqpjnui
    4.  
    5. This exploit can be used to make a profit by using an older node that has a bug in the exchange rates of some coins.
    6.  
    7. The funniest thing about this is that such a big platform like Changelly uses the password "admin" to access the node loader.
    8.  
    9. Join our Telegram Channel for more exploits: https://t.me/byprotocol
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!