Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [root@Sailfish lib]# dmesg
- [ 0.000000] Booting Linux on physical CPU 0x0
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Initializing cgroup subsys cpuacct
- [ 0.000000] Linux version 3.10.96+ (moderator@FM4U5-X250) (gcc version 4.9 20150123 (prerelease) (GCC) ) #13 SMP PREEMPT Fri Jan 26 15:21:42 UTC 2018
- [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=30c7387d
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
- [ 0.000000] Machine: tn8, model: NVIDIA Tegra124 TN8 FFD, serial: 0
- [ 0.000000] Found tsec, start=0xfe000000 size=2000000
- [ 0.000000] Found tegra_fbmem: 011e0000@ad012000
- [ 0.000000] Reserved memory: initialized node iram-carveout, compatible id nvidia,iram-carveout
- [ 0.000000] Tegra reserved memory:
- LP0: fdaff000 - fdafffff
- Bootloader framebuffer: ad012000 - ae1f1fff
- Bootloader framebuffer2: 00000000 - 00000000
- Framebuffer: 00000000 - 00000000
- 2nd Framebuffer: 00000000 - 00000000
- Carveout: 00000000 - 00000000
- Vpr: 00000000 - 0b9fffff
- Tsec: fe000000 - ffffffff
- Bootloader Debug Data: 00000000 - 00000000
- [ 0.000000] Nck: fdb00000 - fdbfffff
- [ 0.000000] cma: CMA: reserved 188 MiB at f1c00000
- [ 0.000000] cma: CMA: reserved 16 MiB at ab400000
- [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
- [ 0.000000] On node 0 totalpages: 514048
- [ 0.000000] free_area_init_node: node 0, pgdat c10950c0, node_mem_map c2645000
- [ 0.000000] Normal zone: 1416 pages used for memmap
- [ 0.000000] Normal zone: 0 pages reserved
- [ 0.000000] Normal zone: 181248 pages, LIFO batch:31
- [ 0.000000] HighMem zone: 2604 pages used for memmap
- [ 0.000000] HighMem zone: 332800 pages, LIFO batch:31
- [ 0.000000] DTS File Name: /dvs/git/dirty/git-master_android/kernel/arch/arm/boot/dts/tegra124-tn8-p1761-1270-a04-e-byd-battery.dts
- [ 0.000000] DTB Build time: May 20 2017 07:17:34
- [ 0.000000] Tegra12: CPU Speedo value 2290, Soc Speedo value 2242, Gpu Speedo value 2093
- [ 0.000000] Tegra12: CPU Speedo ID 5, Soc Speedo ID 0, Gpu Speedo ID 1
- [ 0.000000] Tegra12: CPU Process ID 0,Soc Process ID 1,Gpu Process ID 0
- [ 0.000000] Tegra Revision: A01 SKU: 0x1f CPU Process: 0 Core Process: 1 Bootrom patch v0x0
- [ 0.000000] tegra: PLLP fixed rate: 408000000
- [ 0.000000] tegra_clk_shared_bus_user_init: c2bus client se left ON
- [ 0.000000] tegra_clk_shared_bus_user_init: c3bus client tsec left ON
- [ 0.000000] Lowering cpu_lp maximum rate from 1350000000 to 1044000000
- [ 0.000000] Lowering sbus maximum rate from 420000000 to 372000000
- [ 0.000000] Lowering vic03 maximum rate from 900000000 to 756000000
- [ 0.000000] Lowering tsec maximum rate from 900000000 to 756000000
- [ 0.000000] Lowering msenc maximum rate from 600000000 to 480000000
- [ 0.000000] Lowering se maximum rate from 600000000 to 480000000
- [ 0.000000] Lowering vde maximum rate from 600000000 to 480000000
- [ 0.000000] Lowering host1x maximum rate from 500000000 to 408000000
- [ 0.000000] Lowering vi maximum rate from 700000000 to 600000000
- [ 0.000000] Lowering isp maximum rate from 700000000 to 600000000
- [ 0.000000] Lowering c4bus maximum rate from 700000000 to 600000000
- [ 0.000000] Lowering pll_c maximum rate from 1400000000 to 1066000000
- [ 0.000000] Lowering pll_c2 maximum rate from 1200000000 to 1066000000
- [ 0.000000] Lowering pll_c3 maximum rate from 1200000000 to 1066000000
- [ 0.000000] Lowering hdmi maximum rate from 594000000 to 297000000
- [ 0.000000] Lowering sdmmc1 maximum rate from 208000000 to 204000000
- [ 0.000000] Lowering sdmmc3 maximum rate from 208000000 to 204000000
- [ 0.000000] Lowering gbus maximum rate from 1032000000 to 852000000
- [ 0.000000] Lowering cpu_g maximum rate from 3000000000 to 2218500000
- [ 0.000000] tegra dvfs: VDD_CPU nominal 1260mV, scaling enabled
- [ 0.000000] tegra dvfs: VDD_CORE nominal 1150mV, scaling enabled
- [ 0.000000] tegra dvfs: VDD_GPU nominal 1200mV, scaling enabled
- [ 0.000000] Switching to timer-based delay loop
- [ 0.000000] Tegra reset control registration success
- [ 0.000000] tegra_powergate_init: DONE
- [ 0.000000] Timed out waiting for pll_e lock bit ([0xec] = 0x4300)
- [ 0.000000] Timed out waiting for pll_e lock bit ([0xec] = 0x4300)
- [ 0.000000] PERCPU: Embedded 9 pages/cpu @c3633000 s14400 r8192 d14272 u36864
- [ 0.000000] pcpu-alloc: s14400 r8192 d14272 u36864 alloc=9*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 512632
- [ 0.000000] Kernel command line: androidboot.hardware=tn8 audit=0 selinux=0 androidboot.security=unlocked tegraid=40.1.1.0.0 mem=2010M@2048M memtype=0 vpr_resize tsec=32M@4064M otf_key=5d9eb6e5fc0620b7f6daaefd746b2d3a ddr_die=2048M@2048M section=256M commchip_id=0 usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 androidboot.serialno=0423416021807006c99b androidboot.commchip_id=0 androidboot.modem=none androidboot.touch_vendor_id=0 androidboot.touch_panel_id=9 androidboot.touch_feature=0 androidboot.orientation=0 androidboot.batterytype=1 fiq_debugger.script=reset touch_id=0@9 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,3 sku_override=0 usbcore.old_scheme_first=1 lp0_vec=4096@0xfdaff000 tegra_fbmem=18743296@0xad012000 core_edp_mv=1150 core_edp_ma=4000 board_info=0x06e1:0x00ea:0x04:0x00:0x00 tegraboot=sdmmc gpt gpt_sector=41983 modem_id=0 nck=1048576@0xfdb00000 android.kerneltype=normal androidboot.bootreason=pmc:software_reset,pmic:NoReason vmall
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Memory: 2008MB = 2008MB total
- [ 0.000000] Memory: 1784108k/1784108k available, 274132k reserved, 1120384K highmem
- [ 0.000000] Virtual kernel memory layout:
- vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- vmalloc : 0xec800000 - 0xff000000 ( 296 MB)
- lowmem : 0xc0000000 - 0xec400000 ( 708 MB)
- pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- .text : 0xc0008000 - 0xc0f3b09c (15565 kB)
- .init : 0xc0f3c000 - 0xc0fea840 ( 699 kB)
- .data : 0xc0fec000 - 0xc10bd7dc ( 838 kB)
- .bss : 0xc11e4d18 - 0xc18b858c (6991 kB)
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:704
- [ 0.000000] the number of interrupt controllers found is 5
- [ 0.000000] of_clk_get_from_provider: tegra clock 5 not found
- [ 0.000000] Architected local timer running at 12.00MHz (phys).
- [ 0.000000] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 2863311536128ns
- [ 0.000000] Ignoring duplicate/late registration of read_current_timer delay
- [ 0.000000] Console: colour dummy device 80x30
- [ 0.000510] Calibrating delay loop (skipped), value calculated using timer frequency.. lpj=12000
- [ 0.000526] pid_max: default: 32768 minimum: 301
- [ 0.000735] Security Framework initialized
- [ 0.000839] Mount-cache hash table entries: 512
- [ 0.033906] Initializing cgroup subsys debug
- [ 0.033924] Initializing cgroup subsys devices
- [ 0.033942] Initializing cgroup subsys freezer
- [ 0.033953] Initializing cgroup subsys net_cls
- [ 0.033964] Initializing cgroup subsys blkio
- [ 0.033974] Initializing cgroup subsys perf_event
- [ 0.033996] Initializing cgroup subsys net_prio
- [ 0.034049] CPU: Testing write buffer coherency: ok
- [ 0.034087] ftrace: allocating 38437 entries in 76 pages
- [ 0.083074] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- [ 0.083383] psci: probing for conduit method from DT.
- [ 0.083396] psci: PSCIv0.2 detected in firmware.
- [ 0.083403] psci: Using standard PSCI v0.2 function IDs
- [ 0.083421] Setting up static identity map for 0xc0ba34f8 - 0xc0ba3594
- [ 0.083465] tegra_nct_init: magic(0x7443566e),vid(0xffff),pid(0xffff),ver(V1.0),rev(43)
- [ 0.087046] ftrace: Allocated trace_printk buffers
- [ 0.096809] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
- [ 0.099828] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
- [ 0.102867] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
- [ 0.103012] Brought up 4 CPUs
- [ 0.103032] SMP: Total of 4 processors activated.
- [ 0.103039] CPU: All CPU(s) started in SVC mode.
- [ 0.103902] devtmpfs: initialized
- [ 0.113173] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
- [ 0.115396] pinctrl core: initialized pinctrl subsystem
- [ 0.115747] regulator-dummy: ; Rail ON
- [ 0.120526] Initializing plugin-manager
- [ 0.120655] Plugin-manager not available
- [ 0.120735] Adding domain nvavp-pd to PM domain mc-clk-pd
- [ 0.123025] NET: Registered protocol family 16
- [ 0.126611] DMA: preallocated 256 KiB pool for atomic coherent allocations
- [ 0.128580] console [pstore-1] enabled
- [ 0.128758] ramoops: attached 0x200000@0xfd800000, ecc: 0/0
- [ 0.129132] I2C first dynamic bus number based on alias = 6
- [ 0.129191] cpuidle: using governor ladder
- [ 0.129202] cpuidle: using governor menu
- [ 0.129776] PMC: Setting PMIC interrupt active-low
- [ 0.130363] tegra-pmc device create success
- [ 0.130376] ### PMC reset source: Software reset
- [ 0.134843] ardbeg_camera_auxdata: update camera lookup table.
- [ 0.135060] platform nvavp-pd.1: SMMU isn't ready yet
- [ 0.137120] mapped MMIO address: 0xfdc19000 -> 0x70019000
- [ 0.146346] tegra124-pinctrl 70000868.pinmux: Probed Tegra pinctrl driver
- [ 0.147154] GPIO chip tegra-gpio: created GPIO range 0->250 ==> 70000868.pinmux PIN 0->250
- [ 0.147468] tegra-gpio 6000d000.gpio: Initialising GPIO state 0: name default
- [ 0.147571] gpiochip_add: registered GPIOs 0 to 255 on device: tegra-gpio
- [ 0.148700] platform tegra12-se: SMMU isn't ready yet
- [ 0.149389] platform nvavp-pd.1: domain=ea034910 allocates as[0]=ea050064
- [ 0.149605] platform tegra12-se: domain=ea034750 allocates as[0]=ea0500a4
- [ 0.149663] tegra_smmu 70019000.iommu: Loaded Tegra IOMMU driver
- [ 0.157469] Wake16 for irq=34
- [ 0.159619] platform tegradc.0: domain=ea044310 allocates as[0]=ea0500e4
- [ 0.166700] platform tegradc.0: IOVA linear map 0x00000000ad012000(11e0000)
- [ 0.166968] platform tegradc.0: IOVA linear map 0x00000000f1c00000(bc00000)
- [ 0.167400] platform tegradc.1: domain=ea04aed0 allocates as[0]=ea050124
- [ 0.174442] platform tegradc.1: IOVA linear map 0x00000000ad012000(11e0000)
- [ 0.174696] platform tegradc.1: IOVA linear map 0x00000000f1c00000(bc00000)
- [ 0.176558] platform gk20a.0: domain=ea04a150 allocates as[0]=ea050164
- [ 0.176794] Wake58 for irq=81
- [ 0.176838] Wake41 for irq=129
- [ 0.176849] Wake43 for irq=129
- [ 0.176891] Wake40 for irq=53
- [ 0.176901] Wake42 for irq=53
- [ 0.178377] Wake39 for irq=52
- [ 0.178903] platform tegra-otg: domain=ea05e210 allocates as[0]=ea0501a4
- [ 0.184564] gpio wake7 for gpio=166
- [ 0.184723] board_info: id:sku:fab:major:minor = 0x06e1:0x00ea:0x04:0x45:0x00
- [ 0.184803] display board info: id 0x791, fab 0x0
- [ 0.185047] ardbeg_modem_init: modem_id = 0
- [ 0.185073] Shield ERS 0x6e1
- [ 0.186855] /chosen/nvidia,debug-console-over-sd read failed: -22
- [ 0.187013] platform sdhci-tegra.2: domain=ea1118d0 allocates as[0]=ea0501e4
- [ 0.187860] Clear bootloader IO dpd settings
- [ 0.188066] Loading EMC tables from DeviceTree.
- [ 0.189132] tegra: pll_m is selected as scalable EMC clock source
- [ 0.189163] Lowering emc maximum rate from 1200000000 to 924000000
- [ 0.189180] tegra: validated EMC DFS table
- [ 0.189440] swapper/0 isomgr_init(): iso emc max clk=924000KHz
- [ 0.189453] swapper/0 isomgr_init(): max_iso_bw=7392000KB
- [ 0.189745] ardbeg_touch_init init raydium touch
- [ 0.189884] Raydium - touch platform_id : 11
- [ 0.189960] Temp sensor are from DT
- [ 0.189980] tegra_soctherm_init: initializing soctherm using deprecated API
- [ 0.190242] vdso32: 2 pages (1 code, 1 data) at base c11bb000
- [ 0.190278] hw-breakpoint: Failed to enable monitor mode on CPU 0.
- [ 0.190283] hw-breakpoint: Failed to enable monitor mode on CPU 2.
- [ 0.190288] hw-breakpoint: Failed to enable monitor mode on CPU 3.
- [ 0.191594] [TLK] starting platform early init (TLK built: May 20 2017 07:10:36)
- [ 0.191608] [TLK] NS PHYS buffer support available
- [ 0.191619] [TLK] [secure_otf] te_register_ta_event_handler: registering ta event handler 0x9c85 events_mask: 0x2
- [ 0.191629] [TLK] [hdcp_service] NvTsecKeyEncryption: entry
- [ 0.191639] [TLK] [hdcp_service] TsecInit: entry: MemSize=1700
- [ 0.191648] [TLK] [hdcp_service] KeyEncryption: entry
- [ 0.191657] [TLK] [hdcp_service] KeyEncryption: exit
- [ 0.191667] [TLK] [hdcp_service] TsecDeInit: entry
- [ 0.191676] [TLK] [hdcp_service] TsecDeInit: exit
- [ 0.191685] [TLK] [hdcp_service] NvTsecKeyEncryption: exit
- [ 0.191825] nvdumper: not configured
- [ 0.192210] Tegra restart notifier registered.
- [ 0.206981] bio: create slab <bio-0> at 0
- [ 0.209681] reg-fixed-voltage 0.regulator: Consumer c1 does not have device name
- [ 0.209703] reg-fixed-voltage 0.regulator: Consumer c2 does not have device name
- [ 0.209718] of_get_named_gpio_flags: can't parse gpios property
- [ 0.209828] vdd_ac_bat: 5000 mV ; Rail ON
- [ 0.211868] vgaarb: loaded
- [ 0.212562] SCSI subsystem initialized
- [ 0.212760] libata version 3.00 loaded.
- [ 0.212960] usbcore: registered new interface driver usbfs
- [ 0.213018] usbcore: registered new interface driver hub
- [ 0.213130] usbcore: registered new device driver usb
- [ 0.213520] of_get_named_gpio_flags exited with status 20
- [ 0.213539] of_get_named_gpio_flags exited with status 21
- [ 0.213891] gpio wake27 for gpio=144
- [ 0.215088] of_get_named_gpio_flags exited with status 157
- [ 0.215108] of_get_named_gpio_flags exited with status 158
- [ 0.216636] of_get_named_gpio_flags exited with status 217
- [ 0.216656] of_get_named_gpio_flags exited with status 218
- [ 0.216968] of_get_named_gpio_flags exited with status 172
- [ 0.216987] of_get_named_gpio_flags exited with status 173
- [ 0.217306] of_get_named_gpio_flags exited with status 206
- [ 0.217325] of_get_named_gpio_flags exited with status 207
- [ 0.217983] palmas 4-0058: Irq flag is 0x00000000
- [ 0.218875] palmas 4-0058: Internal DesignRev 0x04, SWRev 0xBE
- [ 0.218894] palmas 4-0058: ES version 2.3: ChipRevision 0xB3BE
- [ 0.221781] gpiochip_find_base: found new base at 1016
- [ 0.221877] gpiochip_add: registered GPIOs 1016 to 1023 on device: gpio.40
- [ 0.228068] palmas-pinctrl pinmux.44: Muxing GPIO dfde, PWM 0, LED 0
- [ 0.228941] palmas-pmic pmic.49: Consumer c1 does not have device name
- [ 0.228989] palmas-pmic pmic.49: Consumer c1 does not have device name
- [ 0.229033] palmas-pmic pmic.49: Consumer c1 does not have device name
- [ 0.229049] palmas-pmic pmic.49: Consumer c2 does not have device name
- [ 0.229063] palmas-pmic pmic.49: Consumer c3 does not have device name
- [ 0.229077] palmas-pmic pmic.49: Consumer c4 does not have device name
- [ 0.229127] palmas-pmic pmic.49: Consumer c1 does not have device name
- [ 0.229183] palmas-pmic pmic.49: Consumer c3 does not have device name
- [ 0.229197] palmas-pmic pmic.49: Consumer c4 does not have device name
- [ 0.229211] palmas-pmic pmic.49: Consumer c5 does not have device name
- [ 0.229224] palmas-pmic pmic.49: Consumer c6 does not have device name
- [ 0.229254] palmas-pmic pmic.49: Consumer c14 does not have device name
- [ 0.229268] palmas-pmic pmic.49: Consumer c15 does not have device name
- [ 0.229282] palmas-pmic pmic.49: Consumer c16 does not have device name
- [ 0.229296] palmas-pmic pmic.49: Consumer c17 does not have device name
- [ 0.229447] palmas-pmic pmic.49: Consumer c1 does not have device name
- [ 0.229461] palmas-pmic pmic.49: Consumer c2 does not have device name
- [ 0.229475] palmas-pmic pmic.49: Consumer c3 does not have device name
- [ 0.229488] palmas-pmic pmic.49: Consumer c4 does not have device name
- [ 0.229502] palmas-pmic pmic.49: Consumer c5 does not have device name
- [ 0.229515] palmas-pmic pmic.49: Consumer c6 does not have device name
- [ 0.229529] palmas-pmic pmic.49: Consumer c7 does not have device name
- [ 0.229543] palmas-pmic pmic.49: Consumer c8 does not have device name
- [ 0.229745] palmas-pmic pmic.49: Consumer c1 does not have device name
- [ 0.229760] palmas-pmic pmic.49: Consumer c2 does not have device name
- [ 0.229819] palmas-pmic pmic.49: Consumer c1 does not have device name
- [ 0.229934] of_get_named_gpio_flags: can't parse gpios property
- [ 0.229951] of_get_named_gpio_flags: can't parse gpios property
- [ 0.229965] of_get_named_gpio_flags: can't parse gpios property
- [ 0.229980] of_get_named_gpio_flags: can't parse gpios property
- [ 0.229994] of_get_named_gpio_flags: can't parse gpios property
- [ 0.230008] of_get_named_gpio_flags: can't parse gpios property
- [ 0.230027] of_get_named_gpio_flags: can't parse gpios property
- [ 0.230041] of_get_named_gpio_flags: can't parse gpios property
- [ 0.230055] of_get_named_gpio_flags: can't parse gpios property
- [ 0.230068] of_get_named_gpio_flags: can't parse gpios property
- [ 0.230082] of_get_named_gpio_flags: can't parse gpios property
- [ 0.230097] of_get_named_gpio_flags: can't parse gpios property
- [ 0.230109] of_get_named_gpio_flags: can't parse gpios property
- [ 0.230122] of_get_named_gpio_flags: can't parse gpios property
- [ 0.230136] of_get_named_gpio_flags: can't parse gpios property
- [ 0.230149] of_get_named_gpio_flags: can't parse gpios property
- [ 0.230163] of_get_named_gpio_flags: can't parse gpios property
- [ 0.230177] of_get_named_gpio_flags: can't parse gpios property
- [ 0.230191] of_get_named_gpio_flags: can't parse gpios property
- [ 0.231860] vdd-cpu: 650 <--> 1400 mV at 1000 mV with ramp delay 5000 uV/us ; Rail ON
- [ 0.234437] vdd-gpu: applied init 1000000uV constraint
- [ 0.235823] vdd-gpu: 700 <--> 1400 mV at 1000 mV with ramp delay 5000 uV/us ; Rail ON
- [ 0.238255] vddio-ddr: at 1350 mV with ramp delay 5000 uV/us ; Rail ON
- [ 0.239777] vdd-core: 700 <--> 1400 mV at 1150 mV ; Rail ON
- [ 0.242703] vdd-1v8: at 1800 mV with ramp delay 5000 uV/us ; Rail ON
- [ 0.245031] vdd-snsr: 3300 mV ; Rail ON
- [ 0.246475] vdd-out2-5v0: 5000 mV ; Rail ON
- [ 0.248105] vdd-out1-5v0: 5000 mV ; Rail ON
- [ 0.249492] avdd-pll: at 1050 mV ; Rail ON
- [ 0.249728] avdd-pll: supplied by vddio-ddr
- [ 0.251943] avdd-lcd: 3300 mV ; Rail ON
- [ 0.253745] vdd-touch: 3300 mV ; Rail OFF
- [ 0.255564] avdd-cam1: 2700 mV ; Rail OFF
- [ 0.257141] avdd-dsi-csi: at 1200 mV ; Rail ON
- [ 0.257377] avdd-dsi-csi: supplied by vdd-1v8
- [ 0.259241] vpp-fuse: 1800 mV ; Rail OFF
- [ 0.261072] avdd-cam-af: 2700 mV ; Rail OFF
- [ 0.264075] vdd-rtc: 950 mV ; Rail ON
- [ 0.265341] vddio-sdmmc-2: 1800 <--> 3300 mV at 1800 mV ; Rail OFF
- [ 0.265585] vddio-sdmmc-2: supplied by vdd-snsr
- [ 0.268040] vddio-hv: at 3300 mV ; Rail ON
- [ 0.268280] vddio-hv: supplied by vdd-out2-5v0
- [ 0.270912] avdd-usb: at 3300 mV ; Rail ON
- [ 0.271150] avdd-usb: supplied by vdd-out2-5v0
- [ 0.272277] REGEN1: at 4300 mV ; Rail OFF
- [ 0.272613] REGEN2: at 4300 mV ; Rail OFF
- [ 0.272941] REGEN3: at 4300 mV ; Rail OFF
- [ 0.273279] SYSEN1: at 4300 mV ; Rail OFF
- [ 0.273608] SYSEN2: at 4300 mV ; Rail OFF
- [ 0.275106] of_get_named_gpio_flags: can't parse gpios property
- [ 0.275117] of_get_named_gpio_flags: can't parse gpios property
- [ 0.275806] media: Linux media interface: v0.10
- [ 0.275858] Linux video capture interface: v2.00
- [ 0.276022] bq2419x-st8 1-006b: Battery_id 1
- [ 0.276167] of_get_named_gpio_flags exited with status 68
- [ 0.276809] bq2419x-st8 1-006b: chip type BQ2419X/3 detected
- [ 0.281016] bq2419x-charger: normal standby ; Rail ON
- [ 0.281111] bq2419x-st8 1-006b: Registering battery charger driver
- [ 0.287595] gpio wake33 for gpio=72
- [ 0.288320] bq2419x-vbus: normal standby ; Rail OFF
- [ 0.288432] bq2419x-st8 1-006b: Charging enabled
- [ 0.289524] bq2419x-st8 1-006b: Charging enabled
- [ 0.290912] Tegra WDT enabled on probe. Timeout = 120 seconds.
- [ 0.291209] tegra_wdt 60005100.watchdog: tegra_wdt_probe done
- [ 0.293615] palmas-wdt watchdog.43: watchdog timer unlocked
- [ 0.294241] palmas-wdt watchdog.43: WATCHDOG starting with timeout 128
- [ 0.300600] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.301032] Bluetooth: Core ver 2.16
- [ 0.301095] NET: Registered protocol family 31
- [ 0.301107] Bluetooth: HCI device and connection manager initialized
- [ 0.301126] Bluetooth: HCI socket layer initialized
- [ 0.301143] Bluetooth: L2CAP socket layer initialized
- [ 0.301176] Bluetooth: SCO socket layer initialized
- [ 0.301533] cfg80211: Calling CRDA to update world regulatory domain
- [ 0.301781] nfc: nfc_init: NFC Core ver 0.1
- [ 0.301844] NET: Registered protocol family 39
- [ 0.301870] ardbeg_wifi_power: 1
- [ 0.402153] of_get_named_gpio_flags exited with status 58
- [ 0.402282] en-lcd-bl: 5000 mV ; Rail ON
- [ 0.402460] of_get_named_gpio_flags exited with status 136
- [ 0.402578] vddio_sd: 3300 mV ; Rail OFF
- [ 0.402627] vddio_sd: supplied by vdd-snsr
- [ 0.402824] reg-fixed-sync-voltage 3.regulator: Consumer c2 does not have device name
- [ 0.402874] of_get_named_gpio_flags exited with status 1022
- [ 0.403390] vddio_dvdd_lcd: 1800 mV ; Rail OFF
- [ 0.403437] vddio_dvdd_lcd: supplied by vdd-1v8
- [ 0.403653] reg-fixed-sync-voltage 4.regulator: Consumer c6 does not have device name
- [ 0.403694] of_get_named_gpio_flags exited with status 1020
- [ 0.404383] vdd_cam_af: 1800 mV ; Rail OFF
- [ 0.404429] vdd_cam_af: supplied by vdd-1v8
- [ 0.404679] of_get_named_gpio_flags exited with status 109
- [ 0.404805] vdd-hdmi-n5: 1200 mV ; Rail OFF
- [ 0.404851] vdd-hdmi-n5: supplied by vddio-ddr
- [ 0.405084] of_get_named_gpio_flags exited with status 86
- [ 0.405197] vddio_hdmi_5v0: 5000 mV ; Rail OFF
- [ 0.405243] vddio_hdmi_5v0: supplied by vdd-out1-5v0
- [ 0.405436] of_get_named_gpio_flags exited with status 81
- [ 0.405547] vdd_ts_1v8: 1800 mV ; Rail OFF
- [ 0.405596] vdd_ts_1v8: supplied by vdd-1v8
- [ 0.405801] of_get_named_gpio_flags exited with status 1018
- [ 0.406516] avdd_ts_3v3: 3300 mV ; Rail OFF
- [ 0.406566] avdd_ts_3v3: supplied by vdd-touch
- [ 0.408898] extcon-cable-xlate 0.extcon: not found proper cable state
- [ 0.409213] ERROR: could not get extcon-dev /extcon/extcon@0:vbus(0)
- [ 0.409232] extcon-cable-xlate 0.extcon: ecx_probe() get success
- [ 0.415256] palmas-usb extcon.39: vbus-irq() INT3_LINE_STATE 0x80
- [ 0.415300] palmas-usb extcon.39: USB cable is attached
- [ 0.718184] palmas-usb extcon.39: id-state: 0x10
- [ 0.718198] palmas-usb extcon.39: All cable detached
- [ 0.720604] Switching to clocksource arch_sys_counter
- [ 0.753737] FS-Cache: Loaded
- [ 0.753808] nvmap_heap_init: nvmap_heap_init: created heap block cache
- [ 0.754004] tegra-carveouts tegra-carveouts.17: iram :dma coherent mem declare 0x0000000040001000,258048
- [ 0.754019] tegra-carveouts tegra-carveouts.17: assigned reserved memory node iram-carveout
- [ 0.754036] dma_declare_coherent_resizable_cma_memory:278: resizable heap=vpr, base=0x0x00000000f1c00000, size=0xbc00000
- [ 0.754055] dma-vpr: heap size is not multiple of cma_chunk_size heap_info->num_chunks (6) rem_chunk_size(0x1c00000)
- [ 0.754243] cma: enabled page replacement for spfn=f1c00, epfn=fd800
- [ 0.754257] dma_declare_coherent_resizable_cma_memory:325: resizable cma heap=vpr create successful
- [ 0.754268] nvmap_page_pool_init: Total RAM pages: 498251
- [ 0.754282] nvmap_page_pool_init: nvmap page pool size: 62281 pages (243 MB)
- [ 0.754381] nvmap_background_zero_thread: PP zeroing thread starting.
- [ 0.755170] misc nvmap: created heap iram base 0x40001000 size (252KiB)
- [ 0.755798] misc nvmap: created heap vpr base 0xf1c00000 size (192512KiB)
- [ 0.755977] nvmap:inner cache maint threshold=1048576
- [ 0.766441] Wake39 for irq=52
- [ 0.766744] tegra-otg tegra-otg: otg transceiver registered
- [ 0.767358] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type therm_est
- [ 0.767630] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type Tboard
- [ 0.767747] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type Tdiode
- [ 0.767846] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type Battery
- [ 0.768025] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die
- [ 0.769870] tegra-pwr-detect power-detect.24: Rail pwrdet-nand is having fixed voltage 1800000
- [ 0.769962] tegra-pwr-detect power-detect.24: Rail pwrdet-uart is having fixed voltage 1800000
- [ 0.770042] tegra-pwr-detect power-detect.24: Rail pwrdet-bb is having fixed voltage 1800000
- [ 0.770127] tegra-pwr-detect power-detect.24: Rail pwrdet-audio is having fixed voltage 1800000
- [ 0.770208] tegra-pwr-detect power-detect.24: Rail pwrdet-mipi is having fixed voltage 1200000
- [ 0.770552] tegra-pwr-detect power-detect.24: Rail pwrdet-cam is having fixed voltage 1800000
- [ 0.770869] tegra-pwr-detect power-detect.24: Rail pwrdet-pex-ctl is having fixed voltage 3300000
- [ 0.770959] tegra-pwr-detect power-detect.24: Rail pwrdet-sdmmc1 is having fixed voltage 1800000
- [ 0.771049] tegra-pwr-detect power-detect.24: Rail pwrdet-sdmmc3 is having voltages: 1800000:3300000
- [ 0.771363] tegra-pwr-detect power-detect.24: Rail pwrdet-sdmmc4 is having fixed voltage 1800000
- [ 0.771705] tegra-pwr-detect power-detect.24: Rail pwrdet-hv is having fixed voltage 3300000
- [ 0.771729] tegra-pwr-detect power-detect.24: started io power detection dynamic control
- [ 0.771743] tegra-pwr-detect power-detect.24: NO_IO_POWER setting 0x2400 package mask 0x1
- [ 0.772049] NET: Registered protocol family 2
- [ 0.772886] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.773075] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.773255] TCP: Hash tables configured (established 8192 bind 8192)
- [ 0.773303] TCP: reno registered
- [ 0.773320] UDP hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.773364] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.773641] NET: Registered protocol family 1
- [ 0.774063] RPC: Registered named UNIX socket transport module.
- [ 0.774076] RPC: Registered udp transport module.
- [ 0.774086] RPC: Registered tcp transport module.
- [ 0.774095] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.774108] PCI: CLS 0 bytes, default 64
- [ 0.774443] tegra-fuse tegra-fuse: Fuse driver initialized succesfully
- [ 0.775643] lc709203f 1-000b: Device Params 0x0301
- [ 0.775680] lc709203f 1-000b: Battery_id 1
- [ 0.782262] power_supply battery: driver failed to report `constant_charge_current' property: -22
- [ 0.782481] lc709203f 1-000b: Registering battery gauge driver
- [ 0.782746] gpio wake54 for gpio=133
- [ 0.782869] lc709203f 1-000b: Battery Voltage 4081mV and SoC 84%
- [ 0.783287] Unpacking initramfs...
- [ 0.784255] lc709203f 1-000b: Battery IIO current channel battery-current not registered yet
- [ 0.787709] lc709203f 1-000b: Battery IIO current channel battery-current not registered yet
- [ 0.828723] Freeing initrd memory: 784K (c2580000 - c2644000)
- [ 0.828772] Adding domain host1x-pd to PM domain mc-clk-pd
- [ 0.835288] host1x host1x: initialized
- [ 0.837842] hw perfevents: enabled with ARMv7 Cortex-A15 PMU driver, 7 counters available
- [ 0.840690] bounce pool size: 64 pages
- [ 0.842729] NTFS driver 2.1.30 [Flags: R/O].
- [ 0.843010] fuse init (API version 7.22)
- [ 0.843227] msgmni has been set to 1329
- [ 0.845885] io scheduler noop registered
- [ 0.845902] io scheduler deadline registered
- [ 0.845972] io scheduler cfq registered (default)
- [ 0.847122] no avaiable target backlight node
- [ 0.847162] of_get_named_gpio_flags: can't parse gpios property
- [ 0.847203] pwm-backlight pwm-backlight: PWM request fail by devm_pwm_get, trying of_pwm_get
- [ 0.847476] Adding domain tsec-pd to PM domain host1x-pd
- [ 0.886868] tsec tsec: initialized
- [ 0.887521] Adding domain vic03-pd to PM domain host1x-pd
- [ 0.887551] Adding domain msenc-pd to PM domain host1x-pd
- [ 0.890327] falcon vic03.0: initialized
- [ 0.891561] falcon msenc: initialized
- [ 0.892731] tegradc tegradc.0: Display dc.54200000 registered with id=0
- [ 0.892751] of_dc_parse_platform_data: No dc-or-node is defined in DT
- [ 0.892805] display board info: id 0x791, fab 0x0
- [ 0.893028] display board info: id 0x791, fab 0x0
- [ 0.893196] of_get_named_gpio_flags: can't parse gpios property
- [ 0.893391] of_dc_parse_platform_data: could not find vrr-settings node
- [ 0.893403] of_dc_parse_platform_data: nvidia,hdmi-vrr-caps not present
- [ 0.893422] of_dc_parse_platform_data: could not find cmu node for adobeRGB
- [ 0.893546] tegradc tegradc.0: DT parsed successfully
- [ 0.893936] tegradc tegradc.0: DSI: HS clock rate is 467500
- [ 0.894115] sysedp_create_consumer: unable to create dsi_0, no consumer_data for dsi_0 found
- [ 0.895352] of_get_named_gpio_flags exited with status 108
- [ 0.895365] of_get_named_gpio_flags: can't parse gpios property
- [ 0.895376] of_get_named_gpio_flags: can't parse gpios property
- [ 0.895386] of_get_named_gpio_flags: can't parse gpios property
- [ 0.895404] of_get_named_gpio_flags exited with status 57
- [ 0.895414] of_get_named_gpio_flags: can't parse gpios property
- [ 0.895424] of_get_named_gpio_flags: can't parse gpios property
- [ 0.895433] of_get_named_gpio_flags: can't parse gpios property
- [ 0.918874] tegradc tegradc.0: DC initialized, skipping tegra_dc_program_mode.
- [ 0.920233] tegradc tegradc.0: probed
- [ 1.097231] tegradc tegradc.0: fb registered
- [ 1.097262] tegradc tegradc.0: nominal-pclk:155787000 parent:467500000 div:3.0 pclk:155833333 154229130~169807830
- [ 1.097610] tegradc tegradc.1: Display dc.54240000 registered with id=1
- [ 1.097634] of_dc_parse_platform_data: No dc-or-node is defined in DT
- [ 1.098069] of_get_named_gpio_flags exited with status 111
- [ 1.098097] of_dc_parse_platform_data: could not find vrr-settings node
- [ 1.098108] of_dc_parse_platform_data: nvidia,hdmi-vrr-caps not present
- [ 1.098119] of_dc_parse_platform_data: could not find SD settings node
- [ 1.098130] of_dc_parse_platform_data: could not find cmu node
- [ 1.098141] of_dc_parse_platform_data: could not find cmu node for adobeRGB
- [ 1.098161] tegradc tegradc.1: DT parsed successfully
- [ 1.099543] nvhdcp: using "always on" policy.
- [ 1.099707] gpio wake4 for gpio=111
- [ 1.100718] tegradc tegradc.1: probed
- [ 1.251931] tegradc tegradc.1: fb registered
- [ 1.251983] hdmi_state_machine_worker (tid eaceaa80): state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1
- [ 1.251998] hdmi_state_machine_set_state_l: switching from state 7 (Takeover from bootloader) to state 0 (Reset)
- [ 1.252753] tegra_camera_platform tegra-camera-platform.35: tegra_camera_probe:camera_platform_driver probe
- [ 1.252983] misc tegra_camera_ctrl: tegra_camera_isomgr_register camera's max_iso_bw 800000
- [ 1.256580] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels
- [ 1.257519] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
- [ 1.259327] 70006300.serial: ttyS0 at MMIO 0x70006300 (irq = 122) is a Tegra
- [ 1.292680] hdmi_state_machine_worker (tid eaceaa80): state 0 (Reset), hpd 0, pending_hpd_evt 0
- [ 1.292685] hdmi_disable_l: audio_switch 0
- [ 1.292687] hdmi_disable_l: hpd_switch 0
- [ 1.292698] hdmi_disable_l: skipping redundant disconnect
- [ 1.292703] hdmi_state_machine_set_state_l: switching from state 0 (Reset) to state 1 (Check Plug)
- [ 1.305971] hdmi_state_machine_worker (tid eaceaa80): state 1 (Check Plug), hpd 0, pending_hpd_evt 0
- [ 1.305976] hdmi_disable_l: audio_switch 0
- [ 1.305978] hdmi_disable_l: hpd_switch 0
- [ 1.305984] hdmi_disable_l: skipping redundant disconnect
- [ 1.305989] hdmi_state_machine_set_state_l: switching from state 1 (Check Plug) to state 3 (Disabled)
- [ 1.411866] extcon-cable-xlate 0.extcon: Extcon Init success
- [ 2.413736] extcon-cable-xlate 0.extcon: New cable state 0x0001
- [ 2.413743] extcon-cable-xlate 0.extcon: Cable0 USB is attach
- [ 3.814556] console [ttyS0] enabled
- [ 3.819078] 70006000.serial: ttyTHS0 at MMIO 0x70006000 (irq = 68) is a SERIAL_TEGRA
- [ 3.827179] 70006040.serial: ttyTHS1 at MMIO 0x70006040 (irq = 69) is a SERIAL_TEGRA
- [ 3.835269] 70006200.serial: ttyTHS2 at MMIO 0x70006200 (irq = 78) is a SERIAL_TEGRA
- [ 3.843758] Adding domain gpu-pd to PM domain host1x-pd
- [ 3.849265] gk20a gk20a.0: load platform data from DT node.
- [ 3.890051] loop: module loaded
- [ 3.893707] zram: Created 1 device(s) ...
- [ 3.897866] Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti
- [ 3.905988] tegra_cec tegra_cec: dt=1 start=0x70015000 end=0x70015FFF irq=35
- [ 3.913130] tegra_cec tegra_cec: tegra_cec_init started
- [ 3.918586] tegra_cec tegra_cec: cec_add_sysfs ret=0
- [ 3.923573] tegra_cec tegra_cec: probed
- [ 3.928632] regulator_get() failed for (bluedroid_pm,avdd), -19
- [ 3.934570] bluedroid_pm_probe: regulator avdd not available
- [ 3.940253] regulator_get() failed for (bluedroid_pm,dvdd), -19
- [ 3.946182] bluedroid_pm_probe: regulator dvdd not available
- [ 3.951872] of_get_named_gpio_flags exited with status 185
- [ 3.951890] of_get_named_gpio_flags exited with status 137
- [ 3.951908] of_get_named_gpio_flags exited with status 166
- [ 3.951925] of_get_named_gpio_flags exited with status 241
- [ 3.952095] gpio wake7 for gpio=166
- [ 3.956488] tegra_profiler: Branch: Dev
- [ 3.960346] tegra_profiler: Version: 1.107
- [ 3.964454] tegra_profiler: Samples version: 36
- [ 3.969004] tegra_profiler: IO version: 20
- [ 3.973116] armv7_pmu: arch: Cortex A15, type: 4, ver: 0
- [ 3.978440] armv7_pmu: arch: Cortex A15, type: 4, ver: 0
- [ 3.983764] armv7_pmu: arch: Cortex A15, type: 4, ver: 0
- [ 3.989087] armv7_pmu: arch: Cortex A15, type: 4, ver: 0
- [ 3.994595] tegra_profiler: auth: init
- [ 3.999725] spi-tegra114 7000d400.spi: Prod settings list not initialized
- [ 4.006593] spi-tegra114 7000d400.spi: Static pin configuration used
- [ 4.013585] spi-tegra114 7000da00.spi: Prod settings list not initialized
- [ 4.020453] spi-tegra114 7000da00.spi: Static pin configuration used
- [ 4.027503] tun: Universal TUN/TAP device driver, 1.6
- [ 4.032573] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
- [ 4.038969] PPP generic driver version 2.4.2
- [ 4.043407] PPP BSD Compression module registered
- [ 4.048131] PPP Deflate Compression module registered
- [ 4.053208] PPP MPPE Compression module registered
- [ 4.058013] NET: Registered protocol family 24
- [ 4.062525] usbcore: registered new interface driver r8152
- [ 4.068072] usbcore: registered new interface driver asix
- [ 4.073519] usbcore: registered new interface driver ax88179_178a
- [ 4.079679] usbcore: registered new interface driver cdc_ether
- [ 4.085574] usbcore: registered new interface driver smsc95xx
- [ 4.091371] usbcore: registered new interface driver cdc_subset
- [ 4.097367] usbcore: registered new interface driver cdc_ncm
- [ 4.103055] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 4.109997] ehci-pci: EHCI PCI platform driver
- [ 4.114848] tegra_xusb_read_usb_calib: usb_calib0 = 0x0285838b
- [ 4.120715] tegra_xhci_probe doesn't have any port enabled
- [ 4.126490] usbcore: registered new interface driver cdc_acm
- [ 4.132164] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
- [ 4.140213] usbcore: registered new interface driver cdc_wdm
- [ 4.145937] usbcore: registered new interface driver usb-storage
- [ 4.152057] usbcore: registered new interface driver usbserial
- [ 4.157940] usbcore: registered new interface driver option
- [ 4.163554] usbserial: USB Serial support registered for GSM modem (1-port)
- [ 4.170565] usbcore: registered new interface driver pl2303
- [ 4.176177] usbserial: USB Serial support registered for pl2303
- [ 4.182146] usbcore: registered new interface driver modem_boot_hsic
- [ 4.188548] usbcore: registered new interface driver nvshieldled
- [ 4.194693] Nvidia Tegra High-Speed USB Device Controller driver (Apr 30, 2012)
- [ 4.202317] tegra USB phy - inst[0] platform info:
- [ 4.207123] port_otg: yes
- [ 4.209759] has_hostpc: yes
- [ 4.212565] phy_interface: USB_PHY_INTF_UTMI
- [ 4.216845] op_mode: TEGRA_USB_OPMODE_DEVICE
- [ 4.221126] qc2_voltage: 0
- [ 4.223845] vbus_pmu_irq: 0
- [ 4.226674] charging: enabled
- [ 4.229655] remote_wakeup: disabled
- [ 4.239820] usbcore: registered new interface driver xpad
- [ 4.245679] gpio wake34 for gpio=82
- [ 4.249464] input: touch as /devices/platform/7000d400.spi/spi_master/spi0/spi0.0/input/input0
- [ 4.268283] avdd_ts_3v3: Disabling parent
- [ 4.289696] otg state changed: SUSPEND --> PERIPHERAL
- [ 4.420891] rm_ts_spidev spi0.0: Raydium - Spi Probe Done!!
- [ 4.426897] rmidev_init: rmi_dev initialization.
- [ 4.428724] Wake16 for irq=34
- [ 4.431694] Enabling wake16
- [ 4.435227] tegra-rtc 7000e000.rtc: rtc core: registered tegra-rtc as rtc1
- [ 4.445896] palmas-rtc rtc.41: rtc core: registered rtc.41 as rtc0
- [ 4.454062] i2c /dev entries driver
- [ 4.458499] virtual_init
- [ 4.463350] nvavp nvavp: allocated IOVA at 8ff00000 for AVP os
- [ 4.470048] tegra_dtv_probe: probing dtv.
- [ 4.474155] setup_stream called
- [ 4.474166] setup_stream: bufsize = 4096, bufnum = 4
- [ 4.479051] setup_dma called
- [ 4.479573] ar0832_init: ++
- [ 4.483103] [IMX135] sensor driver loading
- [ 4.487270] [IMX179] sensor driver loading
- [ 4.491435] [imx132] sensor driver loading
- [ 4.495636] [ar0261] sensor driver loading
- [ 4.499959] ov7695 sensor driver loading
- [ 4.503954] mt9m114 sensor driver loading
- [ 4.508032] [ov10823] sensor driver loading
- [ 4.512478] pcl-generic pcl-generic: virtual_chip_add
- [ 4.517602] pcl-generic pcl-generic: virtual_chip_add
- [ 4.522730] pcl-generic pcl-generic: virtual_chip_add
- [ 4.527813] pcl-generic pcl-generic: of_parse_dpd can't find dpd table
- [ 4.535431] usbcore: registered new interface driver uvcvideo
- [ 4.541273] USB Video Class driver (1.1.1)
- [ 4.558402] of_get_named_gpio_flags exited with status 85
- [ 4.558423] of_get_named_gpio_flags exited with status 179
- [ 4.558441] of_get_named_gpio_flags exited with status 66
- [ 4.558773] tegra-i2c 7000c400.i2c: no acknowledge from address 0x44
- [ 4.566722] iqs253 1-0044: devname:iqs253 func:iqs253_probe device not present
- [ 4.570470] of_get_named_gpio_flags exited with status 221
- [ 4.571576] regulator_get() failed for (2-0010,dvdd), -19
- [ 4.571586] ov5693 2-0010: ov5693_regulator_get dvdd ERR: ffffffed
- [ 4.585540] iqs253 1-0044: devname:iqs253 func:iqs253_probe line:612 probe failed
- [ 4.593099] iqs253: probe of 1-0044 failed with error -121
- [ 4.601601] ashmem: initialized
- [ 4.605572] ozwpan ozwpan: Ozmo Devices WPAN
- [ 4.609937] ozwpan ozwpan: new USB bus registered, assigned bus number 1
- [ 4.616888] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
- [ 4.623762] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 4.631041] usb usb1: Product: Ozmo Devices WPAN
- [ 4.635677] usb usb1: Manufacturer: Linux 3.10.96+ Ozmo WPAN
- [ 4.641352] usb usb1: SerialNumber: ozwpan
- [ 4.642816] of_get_named_gpio_flags exited with status 222
- [ 4.643098] regulator_get() failed for (2-0036,vdig), -19
- [ 4.643107] ov5693 2-0036: ov5693_regulator_get vdig ERR: ffffffed
- [ 4.657547] hub 1-0:1.0: USB hub found
- [ 4.661332] hub 1-0:1.0: 4 ports detected
- [ 4.665766] p->oz_protocol_init = 0xc07a76b0
- [ 4.675114] of-generic-adc-thermal generic-adc-thermal.36: Thermal sensor registerd for thermal zone Tboard
- [ 4.685018] of-generic-adc-thermal generic-adc-thermal.37: TDiode Parameters:
- [ 4.692336] of-generic-adc-thermal generic-adc-thermal.37: m1: ffffffffffa8df1e, m2: ffffffffffabc63d, b1: 24bbbf09930, b2: 2588d7fedc8, k: 2
- [ 4.705517] of-generic-adc-thermal generic-adc-thermal.37: Thermal sensor registerd for thermal zone Tdiode
- [ 4.718148] device-mapper: uevent: version 1.0.3
- [ 4.723025] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: [email protected]
- [ 4.731636] Bluetooth: HCI UART driver ver 2.2
- [ 4.736132] Bluetooth: HCI H4 protocol initialized
- [ 4.741110] sdhci: Secure Digital Host Controller Interface driver
- [ 4.747304] sdhci: Copyright(c) Pierre Ossman
- [ 4.751672] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 4.757768] mmc0 using board files instead of DT
- [ 4.762424] sdhci-tegra sdhci-tegra.3: Parent select= pll_p rate=408000000
- [ 4.769315] sdhci-tegra sdhci-tegra.3: Parent select= pll_c rate=600000000
- [ 4.776715] sdhci-tegra sdhci-tegra.3: Speedo value 2242
- [ 4.782051] sdhci-tegra sdhci-tegra.3: Tuning constraints: nom_mv 1150, boot_mv 1150, min_or_mv 1100
- [ 4.791600] mmc0: no vqmmc regulator found
- [ 4.795728] mmc0: no vmmc regulator found
- [ 4.799754] mmc0: Invalid maximum block size, assuming 512 bytes
- [ 4.829707] mmc0: SDHCI controller on sdhci-tegra.3 [sdhci-tegra.3] using ADMA
- [ 4.837169] mmc1 using board files instead of DT
- [ 4.841817] sdhci-tegra sdhci-tegra.2: Parent select= pll_p rate=408000000
- [ 4.848711] sdhci-tegra sdhci-tegra.2: Parent select= pll_c rate=600000000
- [ 4.858535] sdhci-tegra sdhci-tegra.2: Speedo value 2242
- [ 4.863883] sdhci-tegra sdhci-tegra.2: Tuning constraints: nom_mv 1150, boot_mv 1150, min_or_mv 1100
- [ 4.873208] mmc1: no vqmmc regulator found
- [ 4.877415] mmc1: no vmmc regulator found
- [ 4.881522] mmc1: Invalid maximum block size, assuming 512 bytes
- [ 4.912704] mmc1: SDHCI controller on sdhci-tegra.2 [sdhci-tegra.2] using ADMA
- [ 4.919983] tegra_cec tegra_cec: Can't find physical addresse.
- [ 4.925893] tegra_cec tegra_cec: tegra_cec_init Done.
- [ 4.926134] gpio wake56 for gpio=170
- [ 4.926428] mmc2 using board files instead of DT
- [ 4.926446] sdhci-tegra sdhci-tegra.0: Parent select= pll_p rate=408000000
- [ 4.926458] sdhci-tegra sdhci-tegra.0: Parent select= pll_c rate=600000000
- [ 4.926950] sdhci-tegra sdhci-tegra.0: vddio_sd_slot regulator not found: -517. Assuming vddio_sd_slot is not required.
- [ 4.926964] sdhci-tegra sdhci-tegra.0: Speedo value 2242
- [ 4.926973] sdhci-tegra sdhci-tegra.0: Tuning constraints: nom_mv 1150, boot_mv 1150, min_or_mv 1100
- [ 4.978388] mmc2: no vqmmc regulator found
- [ 4.982520] mmc2: no vmmc regulator found
- [ 4.986545] mmc2: Invalid maximum block size, assuming 512 bytes
- [ 4.992592] sysedp_create_consumer: unable to create sdhci-tegra.0, no consumer_data for sdhci-tegra.0 found
- [ 5.000963] mmc0: BKOPS_EN bit is not set
- [ 5.009299] sdhci-tegra sdhci-tegra.3: Found T2T coeffs data
- [ 5.014981] sdhci-tegra sdhci-tegra.3: 200MHz tap hole coeffs found
- [ 5.028704] mmc2: SDHCI controller on sdhci-tegra.0 [sdhci-tegra.0] using ADMA
- [ 5.037897] tegra-se tegra12-se: tegra_se_probe: complete
- [ 5.043743] hidraw: raw HID events driver (C) Jiri Kosina
- [ 5.051719] usbcore: registered new interface driver usbhid
- [ 5.057304] usbhid: USB HID core driver
- [ 5.061165] tegra_bootloader_debug: Created tegra_bootloader directory
- [ 5.067709] tegra_bootloader_debug: Created sysfs interface tegra_bootloader_verify_regs in tegra_bootloader directory
- [ 5.078412] tegra_bootloader_debug: Created sysfs interface tegra_bootloader_prof in tegra_bootloader directory
- [ 5.089160] ptm ptm: ETB is initialized.
- [ 5.093224] ptm ptm: PTM driver initialized.
- [ 5.100750] ptm ptm: Failed to start the PTM device
- [ 5.106149] soctherm: tz:0 not found, skip thresh prog
- [ 5.111303] soctherm: tz:1 not found, skip thresh prog
- [ 5.116449] soctherm: tz:2 not found, skip thresh prog
- [ 5.121593] soctherm: tz:3 not found, skip thresh prog
- [ 5.127644] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type CPU-therm
- [ 5.136439] thermal thermal_zone6: Registering thermal zone thermal_zone6 for type GPU-therm
- [ 5.145076] thermal thermal_zone7: Registering thermal zone thermal_zone7 for type MEM-therm
- [ 5.153739] thermal thermal_zone8: Registering thermal zone thermal_zone8 for type PLL-therm
- [ 5.162677] tegra_throttle : init passed
- [ 5.168163] Tegra cpuquiet initialized: disabled
- [ 5.172968] cpu-tegra: init EDP limit: 2116 MHz
- [ 5.179611] mpu6xxx 0-0069: nvi_probe mpu6xxx
- [ 5.184428] cm3217 0-0010: cm_probe
- [ 5.198484] cm3217 0-0010: nvs_probe (iio)
- [ 5.203139] cm3217 0-0010: nvs_probe (iio) light done
- [ 5.208209] cm3217 0-0010: cm_probe done
- [ 5.220113] usbcore: registered new interface driver snd-usb-audio
- [ 5.227010] MAX98090 driver registered
- [ 5.231786] tegra_offload_platform probe successfull.
- [ 5.240004] succefully registered offload ops
- [ 5.298430] **********Auto tuning windows*************
- [ 5.303594] WIN_ATTR legend: 0-BOUN_ST, 1-BOUN_END, 2-HOLE
- [ 5.309097] win[0]: 0(0) - 58(1)
- [ 5.312345] win[1]: 63(0) - 143(1)
- [ 5.315764] win[2]: 149(0) - 229(1)
- [ 5.319270] win[3]: 235(0) - 255(1)
- [ 5.322773] ***************************************
- [ 5.327683] ********tuning windows after inserting holes*****
- [ 5.333443] WIN_ATTR legend: 0-BOUN_ST, 1-BOUN_END, 2-HOLE
- [ 5.338944] win[0]:-22(0) - 45(2)
- [ 5.342275] win[1]:47(2) - 58(1)
- [ 5.345519] win[2]:63(0) - 130(2)
- [ 5.348850] win[3]:132(2) - 143(1)
- [ 5.352267] win[4]:149(0) - 215(2)
- [ 5.355684] win[5]:217(2) - 229(1)
- [ 5.359102] win[6]:235(0) - 255(1)
- [ 5.362525] ***********************************************
- [ 5.368114] **********Tuning values*********
- [ 5.372397] **estimated values**
- [ 5.375642] T2T_Vmax 57, T2T_Vmin 80, 1'st_hole_Vmax 47, UI_Vmax 87
- [ 5.381920] **Calculated values**
- [ 5.385250] T2T_Vmax 58, 1'st_hole_Vmax 46, UI_Vmax 85
- [ 5.390400] T2T_Vmin 58, 1'st_hole_Vmin 46, UI_Vmin 86
- [ 5.395549] ***********************************
- [ 5.399092] mpu6xxx 0-0069: nvi_id_dev: FOUND HW ID=0x74 USING: mpu6515
- [ 5.406780] ***********final tuning windows**********
- [ 5.411843] win[0]: -5 - 36
- [ 5.414651] win[1]: 57 - 41
- [ 5.417459] win[2]: 80 - 116
- [ 5.420359] win[3]: 148 - 126
- [ 5.423341] win[4]: 166 - 196
- [ 5.426324] win[5]: 239 - 212
- [ 5.429305] win[6]: 252 - 238
- [ 5.432288] ********************************
- [ 5.436572] best tap win - (-5-36), best tap value 16
- [ 5.441642] sdhci-tegra sdhci-tegra.3: sdhci_tegra_verify_best_tap: tuning freq 200000000hz, best tap 16
- [ 5.453744] mmc0: new HS200 MMC card at address 0001
- [ 5.459042] mmcblk mmc0:0001: Card claimed for testing.
- [ 5.464588] mmcblk0: mmc0:0001 SDW16G 14.6 GiB
- [ 5.469408] mmcblk0rpmb: mmc0:0001 SDW16G partition 3 4.00 MiB
- [ 5.478996] Primary GPT is invalid, using alternate GPT.
- [ 5.484477] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24
- [ 5.244388] tegra30_avp_audio_platform_probe successful.
- [ 5.700767] rt5639 0-001c: Codec Settling took 0 ms
- [ 5.718394] rt5639 0-001c: read 0xfd=0x6
- [ 5.738155] rt5639 0-001c: ASoC: mux INR Mux has no paths
- [ 5.743585] rt5639 0-001c: ASoC: mux INL Mux has no paths
- [ 5.749861] rt5639 0-001c: rt5639_headset_detect jack_type = 1
- [ 5.756082] tegra-snd-rt5639 tegra-snd-rt5639.0: rt5639-aif1 <-> tegra30-i2s.1 mapping ok
- [ 5.764967] tegra-snd-rt5639 tegra-snd-rt5639.0: dit-hifi <-> tegra30-spdif mapping ok
- [ 5.773544] tegra-snd-rt5639 tegra-snd-rt5639.0: dit-hifi <-> tegra30-i2s.3 mapping ok
- [ 5.782223] tegra-snd-rt5639 tegra-snd-rt5639.0: rt5639-aif1 <-> dit-hifi mapping ok
- [ 5.790587] tegra-snd-rt5639 tegra-snd-rt5639.0: dit-hifi <-> dit-hifi mapping ok
- [ 5.798704] tegra-snd-rt5639 tegra-snd-rt5639.0: Allocating for stream playback
- [ 5.806123] tegra-snd-rt5639 tegra-snd-rt5639.0: Allocating for stream capture
- [ 5.813508] tegra-snd-rt5639 tegra-snd-rt5639.0: snd-soc-dummy-dai <-> tegra-offload-pcm mapping ok
- [ 5.823005] compress asoc: snd-soc-dummy-dai <-> tegra-offload-compr mapping ok
- [ 5.830707] tegra-snd-rt5639 tegra-snd-rt5639.0: Allocating for stream playback
- [ 5.838182] tegra-snd-rt5639 tegra-snd-rt5639.0: Allocating for stream capture
- [ 5.845560] tegra-snd-rt5639 tegra-snd-rt5639.0: snd-soc-dummy-dai <-> tegra-offload-pcm mapping ok
- [ 5.854970] tegra-snd-rt5639 tegra-snd-rt5639.0: rt5639-aif1 <-> tegra30-i2s.1 mapping ok
- [ 5.866432] input: tegra-rt5639 Headphone Jack as /devices/platform/tegra-snd-rt5639.0/sound/card1/input1
- [ 5.878469] oprofile: using timer interrupt.
- [ 5.882868] GACT probability NOT on
- [ 5.886378] Mirror/redirect action on
- [ 5.890118] u32 classifier
- [ 5.892889] Actions configured
- [ 5.896310] Netfilter messages via NETLINK v0.30.
- [ 5.901035] nfnl_acct: registering with nfnetlink.
- [ 5.905937] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
- [ 5.912500] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
- [ 5.919478] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
- [ 5.925773] xt_time: kernel timezone is -0000
- [ 5.930441] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 5.935966] arp_tables: (C) 2002 David S. Miller
- [ 5.940726] TCP: cubic registered
- [ 5.944108] Initializing XFRM netlink socket
- [ 5.948602] NET: Registered protocol family 10
- [ 5.953783] mip6: Mobile IPv6
- [ 5.956862] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 5.962463] sit: IPv6 over IPv4 tunneling driver
- [ 5.968065] NET: Registered protocol family 17
- [ 5.972557] NET: Registered protocol family 15
- [ 5.977073] mpu6xxx 0-0069: nvi_init DMP FW loaded
- [ 5.981894] mpu6xxx 0-0069: nvs_probe (iio)
- [ 5.981947] Bridge firewalling registered
- [ 5.982142] Bluetooth: RFCOMM socket layer initialized
- [ 5.982147] Bluetooth: RFCOMM ver 1.11
- [ 5.982153] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- [ 5.982167] Bluetooth: HIDP socket layer initialized
- [ 5.982205] NET: Registered protocol family 35
- [ 6.014477] NET: Registered protocol family 37
- [ 6.015139] mpu6xxx 0-0069: nvs_probe (iio) accelerometer done
- [ 6.015147] mpu6xxx 0-0069: nvs_probe (iio)
- [ 6.015937] mpu6xxx 0-0069: nvs_probe (iio) gyroscope done
- [ 6.015944] mpu6xxx 0-0069: nvs_probe (iio)
- [ 6.016443] mpu6xxx 0-0069: nvs_probe (iio) gyro_temp done
- [ 6.016449] mpu6xxx 0-0069: nvs_probe (iio)
- [ 6.016956] mpu6xxx 0-0069: nvs_probe (iio) significant_motion done
- [ 6.016962] mpu6xxx 0-0069: nvs_probe (iio)
- [ 6.016968] mpu6xxx 0-0069: nvs_probe step_detector disabled
- [ 6.016973] mpu6xxx 0-0069: nvs_probe (iio)
- [ 6.017655] mpu6xxx 0-0069: nvs_probe (iio) quaternion done
- [ 6.017679] mpu6xxx 0-0069: nvs_probe (iio)
- [ 6.017685] mpu6xxx 0-0069: nvs_probe geomagnetic_rotation_vector disabled
- [ 6.017690] mpu6xxx 0-0069: nvs_probe (iio)
- [ 6.017696] mpu6xxx 0-0069: nvs_probe gyroscope_uncalibrated disabled
- [ 6.017822] gpio wake27 for gpio=144
- [ 6.099363] rt5639 0-001c: rt5639_headset_detect jack_type = 1
- [ 6.105353] Key type dns_resolver registered
- [ 6.105446] mpu6xxx 0-0069: nvi_dmp_fw_load_worker done
- [ 6.114873] NET: Registered protocol family 41
- [ 6.124584] mmc1: host does not support reading read-only switch. assuming write-enable.
- [ 6.135771] sdhci-tegra sdhci-tegra.2: Found T2T coeffs data
- [ 6.141454] sdhci-tegra sdhci-tegra.2: 81MHz tap hole coeffs found
- [ 6.153839] Registering SWP/SWPB emulation handler
- [ 6.162988] Adding domain ve-pd to PM domain host1x-pd
- [ 6.170504] isp isp.0: initialized
- [ 6.174910] isp isp.1: initialized
- [ 6.178552] vdd-hdmi-n5: incomplete constraints, leaving on
- [ 6.184136] vdd_cam_af: incomplete constraints, leaving on
- [ 6.190202] bq2419x-charger: incomplete constraints, leaving on
- [ 6.198099] vdd-gpu: incomplete constraints, leaving on
- [ 6.203339] regulator-dummy: incomplete constraints, leaving on
- [ 6.225260] wifi_set_power = 1
- [ 6.228441] ardbeg_wifi_power: 1
- [ 6.415521] **********Auto tuning windows*************
- [ 6.420673] WIN_ATTR legend: 0-BOUN_ST, 1-BOUN_END, 2-HOLE
- [ 6.426184] win[0]: 0(0) - 60(1)
- [ 6.429429] win[1]: 67(0) - 255(1)
- [ 6.432841] ***************************************
- [ 6.437741] ********tuning windows after inserting holes*****
- [ 6.443495] WIN_ATTR legend: 0-BOUN_ST, 1-BOUN_END, 2-HOLE
- [ 6.448992] win[0]:-142(0) - 60(1)
- [ 6.452406] win[1]:67(0) - 132(2)
- [ 6.455733] win[2]:134(2) - 255(1)
- [ 6.459144] ***********************************************
- [ 6.464726] **********Tuning values*********
- [ 6.469004] **estimated values**
- [ 6.472247] T2T_Vmax 59, T2T_Vmin 82, 1'st_hole_Vmax 133, UI_Vmax 209
- [ 6.478694] **Calculated values**
- [ 6.482020] T2T_Vmax 59, 1'st_hole_Vmax 133, UI_Vmax 209
- [ 6.487342] T2T_Vmin 90, 1'st_hole_Vmin 79, UI_Vmin 137
- [ 6.492575] ***********************************
- [ 6.497117] ***********final tuning windows**********
- [ 6.502177] win[0]: -82 - 28
- [ 6.505071] win[1]: 83 - 69
- [ 6.507877] win[2]: 150 - 156
- [ 6.510855] ********************************
- [ 6.515137] best tap win - (-82-28), best tap value 0
- [ 6.520203] sdhci-tegra sdhci-tegra.2: sdhci_tegra_verify_best_tap: tuning freq 81600000hz, best tap 0
- [ 6.530591] mmc1: new ultra high speed SDR50 SDXC card at address 59b4
- [ 6.537309] mmcblk mmc1:59b4: Card claimed for testing.
- [ 6.542773] mmcblk1: mmc1:59b4 00000 119 GiB
- [ 6.557432] mmcblk1: p1
- [ 6.591773] sdhci-tegra sdhci-tegra.0: Found T2T coeffs data
- [ 6.597457] sdhci-tegra sdhci-tegra.0: 204MHz tap hole coeffs found
- [ 6.732701] wifi_set_carddetect = 1
- [ 6.889387] **********Auto tuning windows*************
- [ 6.894692] WIN_ATTR legend: 0-BOUN_ST, 1-BOUN_END, 2-HOLE
- [ 6.900195] win[0]: 2(0) - 77(1)
- [ 6.903438] win[1]: 85(0) - 160(1)
- [ 6.906853] win[2]: 169(0) - 244(1)
- [ 6.910352] ***************************************
- [ 6.915249] ********tuning windows after inserting holes*****
- [ 6.921005] WIN_ATTR legend: 0-BOUN_ST, 1-BOUN_END, 2-HOLE
- [ 6.926499] win[0]:2(0) - 32(2)
- [ 6.929655] win[1]:34(2) - 77(1)
- [ 6.932896] win[2]:85(0) - 115(2)
- [ 6.936224] win[3]:117(2) - 160(1)
- [ 6.939638] win[4]:169(0) - 198(2)
- [ 6.943053] win[5]:200(2) - 244(1)
- [ 6.946465] ***********************************************
- [ 6.952046] **********Tuning values*********
- [ 6.956332] **estimated values**
- [ 6.959575] T2T_Vmax 59, T2T_Vmin 81, 1'st_hole_Vmax 33, UI_Vmax 83
- [ 6.965848] **Calculated values**
- [ 6.969175] T2T_Vmax 59, 1'st_hole_Vmax 33, UI_Vmax 83
- [ 6.974322] T2T_Vmin 59, 1'st_hole_Vmin 33, UI_Vmin 83
- [ 6.979467] ***********************************
- [ 6.984010] ***********final tuning windows**********
- [ 6.989072] win[0]: 18 - 24
- [ 6.991878] win[1]: 43 - 61
- [ 6.994684] win[2]: 101 - 101
- [ 6.997672] win[3]: 132 - 144
- [ 7.000650] win[4]: 185 - 179
- [ 7.003629] win[5]: 220 - 228
- [ 7.006608] ********************************
- [ 7.010889] best tap win - (43-61), best tap value 52
- [ 7.015958] sdhci-tegra sdhci-tegra.0: sdhci_tegra_verify_best_tap: tuning freq 204000000hz, best tap 52
- [ 7.029689] mmc2: new ultra high speed SDR104 SDIO card at address 0001
- [ 7.053201] wifi_set_carddetect = 0
- [ 7.056917] wifi_set_carddetect = 0
- [ 7.061254] SDIO Vendor ID:02d0 and SDIO Device ID: 4324
- [ 7.074728] F1 signature OK, socitype:0x1 chip:0x4324 rev:0x2 pkg:0xd
- [ 7.082596] DHD: dongle ram size is set to 589824(orig 589824) at 0x0
- [ 7.090649] CFG80211-ERROR) wl_setup_wiphy : Registering Vendor80211
- [ 7.097455] wl_create_event_handler(): thread:wl_event_handler:90 started
- [ 7.097471] CFG80211-ERROR) wl_event_handler : tsk Enter, tsk = 0xe9881444
- [ 7.111370] dhd_attach(): thread:dhd_watchdog_thread:91 started
- [ 7.117400] dhd_attach(): thread:dhd_dpc:92 started
- [ 7.122398] dhd_attach(): thread:dhd_rxf:93 started
- [ 7.127385] dhd_attach(): thread:dhd_sysioc:94 started
- [ 7.132818] wifi_get_mac_addr
- [ 7.135872] tegra_nct_read_item: checksum err(0x65008e40/0x0)
- [ 7.141633] _ardbeg_wifi_get_mac_addr_nct: Couldn't find MAC address from NCT
- [ 7.148801] _ardbeg_wifi_get_mac_addr_file: cannot open /mnt/factory/wifi/wifi_mac.txt
- [ 7.157281] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:11:22:33
- [ 7.165563] tegra_sysfs_register
- [ 7.170721]
- Dongle Host Driver, version 1.88.55 (r)
- Compiled in drivers/net/wireless/bcmdhd on Jan 22 2018 at 08:00:46
- [ 7.184291] wifi_set_power = 0
- [ 7.187361] ardbeg_wifi_power: 0
- [ 7.690708] =========== WLAN placed in RESET ========
- [ 7.695986] file system registered
- [ 7.700632] android_usb gadget: Mass Storage Function, version: 2009/09/11
- [ 7.707525] android_usb gadget: Number of LUNs=1
- [ 7.712158] lun0: LUN: removable file: (no medium)
- [ 7.717505] android_maxim14675_set_voltage: max_voltage (vbus) = 12000000
- [ 7.724310] android_maxim14675_set_voltage: max_voltage (vbus) = 12000mV
- [ 7.731033] android_usb gadget: android_usb ready
- [ 8.112380] tegra-udc: bind to driver android_usb
- [ 8.117477] of_get_named_gpio_flags exited with status 130
- [ 8.117504] of_get_named_gpio_flags exited with status 128
- [ 8.117529] of_get_named_gpio_flags exited with status 135
- [ 8.117552] of_get_named_gpio_flags exited with status 134
- [ 8.117574] of_get_named_gpio_flags exited with status 179
- [ 8.117598] of_get_named_gpio_flags exited with status 140
- [ 8.117647] gpiod_set_debounce: gpio-130 status -22
- [ 8.117757] gpiod_set_debounce: gpio-128 status -22
- [ 8.117769] gpio wake51 for gpio=128
- [ 8.121425] gpiod_set_debounce: gpio-135 status -22
- [ 8.121503] gpiod_set_debounce: gpio-134 status -22
- [ 8.121576] gpiod_set_debounce: gpio-179 status -22
- [ 8.121586] gpio wake11 for gpio=179
- [ 8.125239] gpiod_set_debounce: gpio-140 status -22
- [ 8.125250] gpio wake50 for gpio=140
- [ 8.129070] input: gpio-keys as /devices/platform/gpio-keys.33/input/input2
- [ 8.137343] palmas-rtc rtc.41: setting system clock to 2018-01-26 19:42:38 UTC (1516995758)
- [ 8.146514] vi vi: vi_probe: ++
- [ 8.150977] vi vi: initialized
- [ 8.154154] vi vi: Failed to find num of channels, set TPG mode
- [ 8.160107] vi vi: Set TPG mode to 2
- [ 8.164135] power-supply-extcon psy_extcon.30: Extcon name tegra-udc
- [ 8.170976] power-supply-extcon psy_extcon.30: No cable detected
- [ 8.177096] power-supply-extcon psy_extcon.30: psy_extcon_probe() get success
- [ 8.184463] [dram-timers] DRAM derating cdev registered.
- [ 8.189890] Disabling clocks left on by bootloader:
- [ 8.194762] audio_2x
- [ 8.197234] audio
- [ 8.199436] audio4
- [ 8.201724] audio3
- [ 8.204013] audio2
- [ 8.206300] audio1
- [ 8.208587] audio0
- [ 8.210947] clk72mhz
- [ 8.213413] entropy
- [ 8.215795] dsi2-fixed
- [ 8.218428] dsi1-fixed
- [ 8.221072] mipi-cal-fixed
- [ 8.224052] mipi-cal
- [ 8.226523] trace
- [ 8.228729] bsev
- [ 8.230847] sdmmc4_ddr
- [ 8.233525] cclk_lp
- [ 8.235905] pll_x_out0
- [ 8.238539] pll_u_12M
- [ 8.241100] pll_m_out1
- [ 8.244071] tegra_dvfs: vdd_cpu connected to regulator
- [ 8.249378] tegra_dvfs: vdd_core connected to regulator
- [ 8.254760] tegra_dvfs: vdd_gpu connected to regulator
- [ 8.261307] tegra_cl_dvfs tegra_cl_dvfs: DT data retrieved successfully
- [ 8.268186] tegra_dvfs: registered vdd_cpu simon notifier
- [ 8.273778] tegra_cl_dvfs_init_cdev: cpu_cold cooling device registered
- [ 8.274118] Tegra CPU DFLL is initialized with use_dfll = 1
- [ 8.274203] CPU rate: 696 MHz
- [ 8.276054] tegra dvfs: tegra sysfs cap interface is initialized
- [ 8.276166] tegra dvfs: tegra sysfs gpu & emc interface is initialized
- [ 8.276170] tegra dvfs: registered vdd_gpu simon notifier
- [ 8.276177] last reset is due to software reset
- [ 8.276180] KERNEL: PMC reset status reg: 0x3
- [ 8.281483] tegra_actmon.emc: Completed initialization (0)
- [ 8.281799] tegra_actmon.avp: Completed initialization (0)
- [ 8.281833] Failed to find tegra_mon.cpu_emc clock
- [ 8.281837] tegra_mon.cpu_emc: Failed initialization (-19)
- [ 8.282153] ak89xx 0-000d: ak89xx akm_probe
- [ 8.358050] mpu6xxx 0-0069: nvi_aux_dev_valid MPU read 0x48 from device 0xd
- [ 8.365102] ak89xx 0-000d: akm_id_dev AUTO ID=48 ret=0
- [ 8.399680] ak89xx 0-000d: akm_self_test ERR: -16
- [ 9.228485] ak89xx 0-000d: nvs_probe (iio)
- [ 9.233321] ak89xx 0-000d: nvs_probe (iio) magnetic_field done
- [ 9.239178] ak89xx 0-000d: akm_probe done
- [ 9.246319] Set maximum possible CPU frequency 2218500
- [ 9.251452] ALSA device list:
- [ 9.254423] #0: HDA NVIDIA Tegra at 0x70038000 irq 113
- [ 9.259725] #1: tegra-rt5639
- [ 9.263064] Freeing unused kernel memory: 696K (c0f3c000 - c0fea000)
- [ 9.270209] trampoline: Running trampoline v27
- [ 9.275079] trampoline: Initializing devices...
- [ 9.280212] trampoline: Linking partition 'TOS' as 'TOS'
- [ 9.285754] trampoline: Linking partition 'EKS' as 'EKS'
- [ 9.291290] trampoline: Linking partition 'FB' as 'FB'
- [ 9.296623] trampoline: Linking partition 'NCT' as 'NCT'
- [ 9.302132] trampoline: Linking partition 'WB0' as 'WB0'
- [ 9.307643] trampoline: Linking partition 'RP1' as 'RP1'
- [ 9.313163] trampoline: Linking partition 'RP2' as 'RP2'
- [ 9.318686] trampoline: Linking partition 'RP3' as 'RP3'
- [ 9.324189] trampoline: Linking partition 'RP4' as 'RP4'
- [ 9.330098] trampoline: Linking partition 'SOS' as 'SOS'
- [ 9.335606] trampoline: Linking partition 'DTB' as 'DTB'
- [ 9.341150] trampoline: Linking partition 'LNX' as 'LNX'
- [ 9.346670] trampoline: Linking partition 'APP' as 'APP'
- [ 9.352177] trampoline: Linking partition 'CAC' as 'CAC'
- [ 9.357778] trampoline: Linking partition 'MSC' as 'MSC'
- [ 9.363398] trampoline: Linking partition 'USP' as 'USP'
- [ 9.368958] trampoline: Linking partition 'MDA' as 'MDA'
- [ 9.374548] trampoline: Linking partition 'FCT' as 'FCT'
- [ 9.380090] trampoline: Linking partition 'LBP' as 'LBP'
- [ 9.385748] trampoline: Linking partition 'CHG' as 'CHG'
- [ 9.391341] trampoline: Linking partition 'FBP' as 'FBP'
- [ 9.396700] EXT4-fs (mmcblk0p13): mounted filesystem with ordered data mode. Opts: (null)
- [ 9.396995] trampoline: Linking partition 'FCG' as 'FCG'
- [ 9.397296] trampoline: Linking partition 'UDA' as 'UDA'
- [ 9.397611] trampoline: Linking partition 'GPT' as 'GPT'
- [ 9.401682] trampoline: Done initializing
- [ 9.401746] trampoline: Failed to find fstab!
- [ 9.502360] trampoline: Running main_init
- [ 9.506395] trampoline: Fixing up symlink '/sbin/ueventd' -> '../main_init' to '/sbin/ueventd' -> '../init')
- [ 9.516261] trampoline: Fixing up symlink '/sbin/watchdogd' -> '../main_init' to '/sbin/watchdogd' -> '../init')
- [ 10.275373] trampoline: Opened /dev/watchdog, preventing auto-reboot.
- [ 11.765269] EXT4-fs (mmcblk0p23): couldn't mount as ext3 due to feature incompatibilities
- [ 11.775663] EXT4-fs (mmcblk0p23): couldn't mount as ext2 due to feature incompatibilities
- [ 11.787366] EXT4-fs (mmcblk0p23): warning: maximal mount count reached, running e2fsck is recommended
- [ 11.798872] EXT4-fs (mmcblk0p23): mounted filesystem with ordered data mode. Opts: (null)
- [ 11.944376] android_usb: already disabled
- [ 11.951637] bq2419x-st8 1-006b: Setting charging current 2
- [ 11.963082] rndis_function_bind_config MAC: 00:00:00:00:00:00
- [ 11.968893] android_usb gadget: using random self ethernet address
- [ 11.975067] android_usb gadget: using random host ethernet address
- [ 11.981460] rndis0: MAC 9a:9a:1a:e8:a9:b8
- [ 11.985472] rndis0: HOST MAC 92:b5:55:72:04:83
- [ 11.994947] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready
- [ 12.157675] bq2419x-st8 1-006b: Charging enabled
- [ 12.165510] lc709203f 1-000b: lc709203f_update_battery_status() Battery status: 1 and SoC: 82% UI status: 1
- [ 12.175257] power-supply-extcon psy_extcon.30: USB charger cable detected
- [ 12.182061] tegra-udc tegra-udc.0: notification status (1,1,0) (0x0, 0x2)
- [ 12.188883] android_work: did not send uevent (0 0 (null))
- [ 12.284801] android_work: sent uevent USB_STATE=CONNECTED
- [ 12.293825] android_work: sent uevent USB_STATE=DISCONNECTED
- [ 12.428671] android_work: sent uevent USB_STATE=CONNECTED
- [ 12.436869] android_usb gadget: high-speed config #1: android
- [ 12.443100] IPv6: ADDRCONF(NETDEV_CHANGE): rndis0: link becomes ready
- [ 12.449981] rndis_command_complete: MaxTransferSize: 2048 : Multi_pkt_txr: disabled
- [ 12.457800] tegra-udc tegra-udc.0: connected to SDP
- [ 12.462747] bq2419x-st8 1-006b: Setting charging current 500
- [ 12.468752] android_work: sent uevent USB_STATE=CONFIGURED
- [ 12.669686] bq2419x-st8 1-006b: Charging enabled
- [ 12.679048] bq2419x-st8 1-006b: Changing VINDPM to soc:voltage:vreg 82:4520:8
- [ 12.687854] lc709203f 1-000b: lc709203f_update_battery_status() Battery status: 1 and SoC: 82% UI status: 1
- [ 12.697587] power-supply-extcon psy_extcon.30: Charging cable removed
- [ 12.704096] power-supply-extcon psy_extcon.30: USB charger cable detected
- [ 12.710899] tegra-udc tegra-udc.0: notification status (1,1,0) (0x2, 0x2)
- [ 13.066808] EXT4-fs (mmcblk0p23): re-mounted. Opts: (null)
- [ 13.086790] preinit: (13.05) Welcome to SailfishOS 2.1.3.7 (Kymijoki) (armv7hl)
- [ 13.094623] preinit: (13.06) "Magic Close" /dev/watchdog with character 'V'
- [ 13.117742] preinit: (13.08) is_erase_needed: No : 0
- [ 13.147989] preinit: (13.11) get_bootstate: USER : 0
- [ 13.153408] preinit: (13.11) BOOTSTATE = USER
- [ 13.160519] preinit: (13.12) Booting to default.target
- [ 13.190504] systemd[1]: systemd 225 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK -SYSVINIT +UTMP -LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
- [ 13.208876] systemd[1]: Detected architecture arm.
- [ 13.216381] systemd[1]: Set hostname to <Sailfish>.
- [ 13.301525] systemd[1]: sys-fs-pstore.mount: Cannot create mount unit for API file system /sys/fs/pstore. Refusing.
- [ 13.319114] systemd[1]: data.mount: Unit is bound to inactive unit dev-mmcblk0p23.device. Stopping, too.
- [ 13.355970] systemd[1]: sys-fs-pstore.mount: Cannot add dependency job, ignoring: Unit sys-fs-pstore.mount failed to load: Invalid argument. See system logs and 'systemctl status sys-fs-pstore.mount' for details.
- [ 13.376872] systemd[1]: Created slice Root Slice.
- [ 13.381853] systemd[1]: Listening on Journal Socket (/dev/log).
- [ 13.390820] systemd[1]: Created slice User and Session Slice.
- [ 13.399641] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
- [ 13.409374] systemd[1]: Listening on udev Control Socket.
- [ 13.418250] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
- [ 13.429252] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
- [ 13.440513] systemd[1]: Reached target Swap.
- [ 13.447828] systemd[1]: Listening on Journal Socket.
- [ 13.456269] systemd[1]: Created slice System Slice.
- [ 13.465518] systemd[1]: Mounting Droid mount for /dev/cpuctl...
- [ 13.475711] systemd[1]: Mounting Droid mount for /dev/cpuset...
- [ 13.486073] systemd[1]: Starting Journal Service...
- [ 13.495539] systemd[1]: Starting Setup Virtual Console...
- [ 13.505229] systemd[1]: Starting Remount Root and Kernel File Systems...
- [ 13.517118] systemd[1]: Mounting Droid mount for /dev/stune...
- [ 13.529131] systemd[1]: Created slice system-serial\x2dgetty.slice.
- [ 13.540543] EXT4-fs (mmcblk0p23): re-mounted. Opts: (null)
- [ 13.540673] systemd[1]: Mounting Droid mount for /dev/bfqio...
- [ 13.556671] systemd[1]: Reached target Slices.
- [ 13.565691] systemd[1]: Starting Create list of required static device nodes for the current kernel...
- [ 13.579505] systemd[1]: Mounting FFS mount...
- [ 13.588810] systemd[1]: Mounting Debug File System...
- [ 13.598897] systemd[1]: Mounting Temporary Directory...
- [ 13.607265] systemd[1]: Listening on udev Kernel Socket.
- [ 13.621562] systemd[1]: Mounted Debug File System.
- [ 13.629704] systemd[1]: Mounted FFS mount.
- [ 13.636518] systemd[1]: Mounted Temporary Directory.
- [ 13.644620] systemd[1]: dev-cpuctl.mount: Mount process exited, code=exited status=32
- [ 13.655837] systemd[1]: Failed to mount Droid mount for /dev/cpuctl.
- [ 13.665328] systemd[1]: dev-cpuctl.mount: Unit entered failed state.
- [ 13.674531] systemd[1]: dev-cpuset.mount: Mount process exited, code=exited status=32
- [ 13.686024] systemd[1]: Failed to mount Droid mount for /dev/cpuset.
- [ 13.695514] systemd[1]: dev-cpuset.mount: Unit entered failed state.
- [ 13.705174] systemd[1]: Started Setup Virtual Console.
- [ 13.713773] systemd[1]: Started Remount Root and Kernel File Systems.
- [ 13.723236] systemd[1]: dev-stune.mount: Mount process exited, code=exited status=32
- [ 13.734573] systemd[1]: Failed to mount Droid mount for /dev/stune.
- [ 13.744056] systemd[1]: dev-stune.mount: Unit entered failed state.
- [ 13.753831] systemd[1]: dev-bfqio.mount: Mount process exited, code=exited status=32
- [ 13.765134] systemd[1]: Failed to mount Droid mount for /dev/bfqio.
- [ 13.774650] systemd[1]: dev-bfqio.mount: Unit entered failed state.
- [ 13.784238] systemd[1]: Started Create list of required static device nodes for the current kernel.
- [ 13.797300] systemd[1]: Started Journal Service.
- [ 13.911678] systemd-journald[567]: Received request to flush runtime journal from PID 1
- [ 14.455737] EXT4-fs (mmcblk0p8): warning: maximal mount count reached, running e2fsck is recommended
- [ 14.473448] EXT4-fs (mmcblk0p8): mounted filesystem with writeback data mode. Opts: data=writeback
- [ 17.165308] bq2419x-st8 1-006b: Battery temp 27
- [ 19.043316] trampoline: Starting rm-wrapper...
- [ 21.187874] tegra_simon_cpu_grading_cb: graded cpu: v = 800, t = 35500, grade = 0
- [ 43.869527] oz_net_notifier: event NETDEV_DOWN
- [ 43.874106] oz_binding_remove: Remove binding: 'rndis0'
- [ 43.880458] oz_net_notifier: event NETDEV_UNREGISTER
- [ 43.888789] oz_binding_remove: Remove binding: 'rndis0'
- [ 43.907065] rndis_function_bind_config MAC: 92:B5:55:72:04:83
- [ 43.913291] android_usb gadget: using random self ethernet address
- [ 43.919636] android_usb gadget: using previous host ethernet address
- [ 43.927104] rndis0: MAC 0a:21:1c:0d:95:a3
- [ 43.931337] rndis0: HOST MAC 92:b5:55:72:04:83
- [ 43.939052] bq2419x-st8 1-006b: Setting charging current 2
- [ 43.979721] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready
- [ 44.115202] android_work: sent uevent USB_STATE=DISCONNECTED
- [ 44.145882] bq2419x-st8 1-006b: Charging enabled
- [ 44.155229] lc709203f 1-000b: lc709203f_update_battery_status() Battery status: 1 and SoC: 82% UI status: 1
- [ 44.178956] power-supply-extcon psy_extcon.30: Charging cable removed
- [ 44.185774] power-supply-extcon psy_extcon.30: USB charger cable detected
- [ 44.192893] tegra-udc tegra-udc.0: notification status (1,1,0) (0x2, 0x2)
- [ 44.218859] droid-hal-init: init first stage started!
- [ 44.227733] droid-hal-init: init second stage started!
- [ 44.233716] android_work: sent uevent USB_STATE=CONNECTED
- [ 44.239469] android_work: sent uevent USB_STATE=DISCONNECTED
- [ 44.251278] droid-hal-init: property_set("ro.boot.hardware", "tn8") failed
- [ 44.260053] droid-hal-init: Running restorecon...
- [ 44.265294] droid-hal-init: waitpid failed: No child processes
- [ 44.274503] droid-hal-init: (Loading properties from /default.prop took 0.00s.)
- [ 44.285513] droid-hal-init: property 'ro.product.cpu.abi' doesn't exist while expanding '/init.extraenv.${ro.product.cpu.abi}.rc'
- [ 44.297309] droid-hal-init: /init.rc: 11: error while expanding import
- [ 44.311446] droid-hal-init: (Parsing /init.environ.rc took 0.00s.)
- [ 44.334575] droid-hal-init: could not import file 'init.configfs.usb.rc' from 'init.nv_dev_board.usb.rc': No such file or directory
- [ 44.347077] droid-hal-init: (Parsing init.nv_dev_board.usb.rc took 0.02s.)
- [ 44.366513] droid-hal-init: (Parsing init.none.rc took 0.00s.)
- [ 44.373631] android_work: sent uevent USB_STATE=CONNECTED
- [ 44.384700] android_usb gadget: high-speed config #1: android
- [ 44.392027] rndis_command_complete: MaxTransferSize: 2048 : Multi_pkt_txr: disabled
- [ 44.392056] droid-hal-init: init.comms.rc: 55: invalid keyword 'schedrt'
- [ 44.392564] droid-hal-init: (Parsing init.comms.rc took 0.02s.)
- [ 44.415217] droid-hal-init: (Parsing init.hdcp.rc took 0.02s.)
- [ 44.415351] IPv6: ADDRCONF(NETDEV_CHANGE): rndis0: link becomes ready
- [ 44.417063] tegra-udc tegra-udc.0: connected to SDP
- [ 44.417074] bq2419x-st8 1-006b: Setting charging current 500
- [ 44.417125] android_work: sent uevent USB_STATE=CONFIGURED
- [ 44.446489] droid-hal-init: (Parsing init.tlk.rc took 0.00s.)
- [ 44.452275] droid-hal-init: could not import file 'init.tf.rc' from 'init.tegra.rc': No such file or directory
- [ 44.464796] droid-hal-init: (Parsing init.ussrd.rc took 0.00s.)
- [ 44.470756] droid-hal-init: could not import file 'init.qvs.rc' from 'init.tegra.rc': No such file or directory
- [ 44.480864] droid-hal-init: (Parsing init.tegra.rc took 0.16s.)
- [ 44.486801] droid-hal-init: (Parsing init.tegra_emmc.rc took 0.16s.)
- [ 44.495744] droid-hal-init: init.tn8_common.rc: 26: symlink requires 2 arguments
- [ 44.503338] droid-hal-init: could not import file 'init.tn8diag.rc' from 'init.tn8_common.rc': No such file or directory
- [ 44.514218] droid-hal-init: (Parsing init.tn8_common.rc took 0.02s.)
- [ 44.523249] droid-hal-init: (Parsing init.t124.rc took 0.00s.)
- [ 44.531410] droid-hal-init: (Parsing init.cal.rc took 0.00s.)
- [ 44.539481] droid-hal-init: (Parsing init.ray_touch.rc took 0.00s.)
- [ 44.545773] droid-hal-init: (Parsing /init.tn8.rc took 0.23s.)
- [ 44.554987] droid-hal-init: (Parsing /init.usb.configfs.rc took 0.00s.)
- [ 44.563945] droid-hal-init: (Parsing /init.zygote32.rc took 0.00s.)
- [ 44.573311] droid-hal-init: ignored duplicate definition of service 'bugreport'droid-hal-init: (Parsing /init.cm.rc took 0.01s.)
- [ 44.585032] droid-hal-init: (Parsing /init.rc took 0.30s.)
- [ 44.590872] droid-hal-init: Waiting for /dev/.coldboot_done...
- [ 44.596731] droid-hal-init: Waiting for /dev/.coldboot_done took 0.01s.
- [ 44.603376] droid-hal-init: /dev/hw_random not found
- [ 44.608389] keychord: using input dev gpio-keys for fevent
- [ 44.614252] droid-hal-init: loglevel: invalid log level'64'
- [ 44.620685] bq2419x-st8 1-006b: Charging enabled
- [ 44.620801] droid-hal-init: write_file: Unable to open '/proc/sys/kernel/hung_task_timeout_secs': No such file or directory
- [ 44.622993] droid-hal-init: write_file: Unable to open '/proc/sys/abi/swp': No such file or directory
- [ 44.624547] droid-hal-init: write_file: Unable to open '/d/tegra_actmon/cpu_emc/avg_act_threshold': No such file or directory
- [ 44.624686] droid-hal-init: cannot find '/sbin/watchdogd' (No such file or directory), disabling 'watchdogd'
- [ 44.625021] droid-hal-init: /dev/hw_random not found
- [ 44.625124] droid-hal-init: Starting service 'droid_init_done'...
- [ 44.625915] droid-hal-init: write_file: Unable to write to '/sys/class/android_usb/android0/f_ffs/aliases': Device or resource busy
- [ 44.626624] fs_mgr: Cannot open file /fstab.tn8
- [ 44.626689] droid-hal-init: fs_mgr_mount_all returned an error
- [ 44.704741] bq2419x-st8 1-006b: Changing VINDPM to soc:voltage:vreg 82:4520:8
- [ 44.705239] droid-hal-init: (Parsing /usr/libexec/droid-hybris/system/etc/init/atrace.rc took 0.00s.)
- [ 44.722802] lc709203f 1-000b: lc709203f_update_battery_status() Battery status: 1 and SoC: 82% UI status: 1
- [ 44.732573] power-supply-extcon psy_extcon.30: Charging cable removed
- [ 44.732852] droid-hal-init: (Parsing /usr/libexec/droid-hybris/system/etc/init/bootstat.rc took 0.03s.)
- [ 44.748466] power-supply-extcon psy_extcon.30: USB charger cable detected
- [ 44.755319] tegra-udc tegra-udc.0: notification status (1,1,0) (0x2, 0x2)
- [ 44.764436] droid-hal-init: (Parsing /usr/libexec/droid-hybris/system/etc/init/debuggerd.rc took 0.03s.)
- [ 44.776718] droid-hal-init: (Parsing /usr/libexec/droid-hybris/system/etc/init/drmserver.rc took 0.00s.)
- [ 44.788861] droid-hal-init: (Parsing /usr/libexec/droid-hybris/system/etc/init/dumpstate.rc took 0.00s.)
- [ 44.800740] droid-hal-init: (Parsing /usr/libexec/droid-hybris/system/etc/init/gatekeeperd.rc took 0.00s.)
- [ 44.812789] droid-hal-init: (Parsing /usr/libexec/droid-hybris/system/etc/init/init-debug.rc took 0.00s.)
- [ 44.824882] droid-hal-init: (Parsing /usr/libexec/droid-hybris/system/etc/init/installd.rc took 0.00s.)
- [ 44.838734] droid-hal-init: (Parsing /usr/libexec/droid-hybris/system/etc/init/logcatd.rc took 0.00s.)
- [ 44.851617] droid-hal-init: (Parsing /usr/libexec/droid-hybris/system/etc/init/logd.rc took 0.00s.)
- [ 44.865315] droid-hal-init: (Parsing /usr/libexec/droid-hybris/system/etc/init/mediacodec.rc took 0.00s.)
- [ 44.881981] droid-hal-init: (Parsing /usr/libexec/droid-hybris/system/etc/init/mediadrmserver.rc took 0.00s.)
- [ 44.892872] droid-hal-init: (Parsing /usr/libexec/droid-hybris/system/etc/init/mediaextractor.rc took 0.00s.)
- [ 44.907567] droid-hal-init: (Parsing /usr/libexec/droid-hybris/system/etc/init/mtpd.rc took 0.00s.)
- [ 44.920355] droid-hal-init: (Parsing /usr/libexec/droid-hybris/system/etc/init/perfprofd.rc took 0.00s.)
- [ 44.941808] droid-hal-init: (Parsing /usr/libexec/droid-hybris/system/etc/init/racoon.rc took 0.01s.)
- [ 44.955443] droid-hal-init: (Parsing /usr/libexec/droid-hybris/system/etc/init/rild.rc took 0.00s.)
- [ 44.968765] droid-hal-init: (Parsing /usr/libexec/droid-hybris/system/etc/init/servicemanager.rc took 0.00s.)
- [ 44.981579] droid-hal-init: Could not import file '/usr/libexec/droid-hybris/system/etc/init/superuser.rc'
- [ 44.999866] droid-hal-init: (Parsing /usr/libexec/droid-hybris/system/etc/init/uncrypt.rc took 0.01s.)
- [ 45.021337] droid-hal-init: (Parsing /usr/libexec/droid-hybris/system/etc/init/vdc.rc took 0.01s.)
- [ 45.026290] warning: `ofonod' uses 32-bit capabilities (legacy support in use)
- [ 45.038839] droid-hal-init: (Parsing /usr/libexec/droid-hybris/system/etc/init/vold.rc took 0.00s.)
- [ 45.051118] droid-hal-init: fs_mgr_mount_all returned unexpected error 255
- [ 45.058111] fs_mgr: Cannot open file /fstab.tn8
- [ 45.063840] droid-hal-init: Starting service 'logd'...
- [ 45.077242] droid-hal-init: (Loading properties from /system/build.prop took 0.00s.)
- [ 45.085086] droid-hal-init: (Loading properties from /vendor/build.prop took 0.00s.)
- [ 45.092969] droid-hal-init: (Loading properties from /factory/factory.prop took 0.00s.)
- [ 45.107951] droid-hal-init: Setting build properties for wx_na_wf model
- [ 45.116881] fs_mgr: Cannot open file /fstab.tn8
- [ 45.121483] droid-hal-init: unable to read fstab /fstab.tn8: No such file or directory
- [ 45.129985] droid-hal-init: Starting service 'debuggerd'...
- [ 45.137209] droid-hal-init: do_start: Service debuggerd64 not found
- [ 45.153066] droid-hal-init: Starting service 'vold'...
- [ 45.167715] droid-hal-init: Not bootcharting.
- [ 45.185963] logd.auditd: start
- [ 45.189119] logd.klogd: 45155437737
- [ 45.372145] droid-hal-init: Starting service 'exec 1 (/system/bin/tzdatacheck)'...
- [ 45.445604] fs_mgr: Cannot open file /fstab.tn8
- [ 45.461303] droid-hal-init: Service 'exec 1 (/system/bin/tzdatacheck)' (pid 906) exited with status 0
- [ 45.476018] droid-hal-init: Starting service 'start-gps'...
- [ 45.505999] droid-hal-init: Starting service 'sysinit'...
- [ 45.516327] droid-hal-init: (Loading properties from /data/local.prop took 0.00s.)
- [ 45.716186] droid-hal-init: Starting service 'logd-reinit'...
- [ 45.725033] droid-hal-init: Starting service 'servicemanager'...
- [ 45.735113] droid-hal-init: Starting service 'tlk_daemon'...
- [ 45.743959] droid-hal-init: Starting service 'ss_status'...
- [ 45.750388] droid-hal-init: cannot find '/vendor/bin/eks2_client' (No such file or directory), disabling 'eks2_client'
- [ 45.761362] [TLK] [storage] Storage version: ss(3.0)
- [ 45.762889] droid-hal-init: Starting service 'ussr_setup'...
- [ 45.763700] droid-hal-init: Starting service 'ussrd'...
- [ 45.764266] droid-hal-init: Starting service 'rm_ts_service'...
- [ 45.764839] droid-hal-init: Starting service 'drm'...
- [ 45.765496] droid-hal-init: Starting service 'installd'...
- [ 45.766142] droid-hal-init: Starting service 'mediacodec'...
- [ 45.767943] droid-hal-init: Starting service 'mediadrm'...
- [ 45.768586] droid-hal-init: Starting service 'mediaextractor'...
- [ 45.769208] droid-hal-init: Starting service 'ril-daemon'...
- [ 45.769806] droid-hal-init: cannot find '/usr/libexec/droid-hybris/system/bin/minimediaservice' (No such file or directory), disabling 'minimedia'
- [ 45.769845] droid-hal-init: cannot find '/usr/libexec/droid-hybris/system/bin/minisfservice' (No such file or directory), disabling 'minisf'
- [ 45.769883] droid-hal-init: cannot find '/usr/libexec/droid-hybris/system/bin/miniafservice' (No such file or directory), disabling 'miniaf'
- [ 45.770173] droid-hal-init: Starting service 'gpsd'...
- [ 45.770476] logd.daemon: reinit
- [ 45.773461] droid-hal-init: Service 'logd-reinit' (pid 950) exited with status 0
- [ 45.908138] droid-hal-init: Service 'start-gps' (pid 927) exited with status 0
- [ 45.921440] droid-hal-init: Service 'droid_init_done' (pid 798) exited with status 0
- [ 45.942304] Tegra cpuquiet clusterswitch enabled
- [ 45.949419] droid-hal-init: write_file: Unable to write to '/sys/module/tegra12_emc/parameters/pasr_enable': Function not implemented
- [ 45.974722] droid-hal-init: Service 'ss_status' (pid 953) exited with status 0
- [ 45.998212] droid-hal-init: Starting service 'gatekeeperd'...
- [ 46.022002] droid-hal-init: Starting service 'perfprofd'...
- [ 46.029131] droid-hal-init: Starting service 'console'...
- [ 46.035253] droid-hal-init: property_set("ro.radio.noril", "true") failed
- [ 46.258614] droid-hal-init: Service 'sysinit' (pid 932) exited with status 0
- [ 46.603970] edid invalid
- [ 46.624231] tegra_simon_gpu_grading_cb: graded gpu: v = 800, t = 36000, grade = 0
- [ 47.110396] edid invalid
- [ 47.286798] droid-hal-init: Service 'ussr_setup' (pid 954) exited with status 0
- [ 47.352010] rm_ts_spidev spi0.0: Raydium - Firmware v73.19
- [ 47.367991] rm_ts_spidev spi0.0: Raydium - Enable input device done
- [ 48.390591] droid-hal-init: write_file: Unable to open '/sys/class/tty/ttyS0/console_write_enable': No such file or directory
- [ 48.402382] droid-hal-init: Starting service 'exec 2 (/system/bin/bootstat)'...
- [ 48.460174] droid-hal-init: Service 'exec 2 (/system/bin/bootstat)' (pid 1341) exited with status 0
- [ 48.470287] droid-hal-init: Starting service 'exec 3 (/system/bin/bootstat)'...
- [ 48.506565] droid-hal-init: Service 'exec 3 (/system/bin/bootstat)' (pid 1356) exited with status 0
- [ 48.516269] droid-hal-init: Starting service 'exec 4 (/system/bin/bootstat)'...
- [ 48.541553] droid-hal-init: Service 'exec 4 (/system/bin/bootstat)' (pid 1357) exited with status 0
- [ 48.550739] droid-hal-init: Starting service 'exec 5 (/system/bin/bootstat)'...
- [ 48.580309] droid-hal-init: Service 'exec 5 (/system/bin/bootstat)' (pid 1358) exited with status 0
- [ 48.592017] edid invalid
- [ 50.001638] droid-hal-init: Service 'console' (pid 996) exited with status 129
- [ 50.013133] droid-hal-init: Service 'console' (pid 996) killing any children in process group
- [ 50.042359] edid invalid
- [ 51.118164] droid-hal-init: Starting service 'console'...
- [ 51.532747] edid invalid
- [ 53.374548] cgroup: systemd (1) created nested cgroup for controller "blkio" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
- [ 119.047451] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
- [ 653.556962] edid invalid
- [ 654.801428] edid invalid
- [ 656.077196] edid invalid
- [ 657.553132] edid invalid
- [ 722.048984] edid invalid
- [ 1083.400474] bq2419x-st8 1-006b: Changing VINDPM to soc:voltage:vreg 85:4600:9
- [ 1176.260372] edid invalid
- [ 1393.561215] edid invalid
- [ 1459.287858] edid invalid
- [ 2330.521788] edid invalid
- [ 4072.522699] edid invalid
- [root@Sailfish lib]#
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement