Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl 6.2 2013-04-20 r3812 [x86_64-linux-3.11.0-12-generic] (local build)
- Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Western Digital Scorpio Blue Serial ATA
- Device Model: WDC WD3200BEVT-22ZCT0
- Serial Number: WD-WXE308P51203
- LU WWN Device Id: 5 0014ee 2ac0b78e3
- Firmware Version: 11.01A11
- User Capacity: 320,072,933,376 bytes [320 GB]
- Sector Size: 512 bytes logical/physical
- Rotation Rate: 5400 rpm
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ATA8-ACS (minor revision not indicated)
- SATA Version is: SATA 2.5, 1.5 Gb/s
- Local Time is: Sun Nov 17 14:08:41 2013 UTC
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 121) The previous self-test completed having
- the read element of the test failed.
- Total time to complete Offline
- data collection: (10800) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 127) minutes.
- Conveyance self-test routine
- recommended polling time: ( 5) minutes.
- SCT capabilities: (0x303f) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 963
- 3 Spin_Up_Time 0x0027 193 186 021 Pre-fail Always - 1341
- 4 Start_Stop_Count 0x0032 096 096 000 Old_age Always - 4915
- 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
- 7 Seek_Error_Rate 0x002e 100 253 051 Old_age Always - 0
- 9 Power_On_Hours 0x0032 070 070 000 Old_age Always - 22093
- 10 Spin_Retry_Count 0x0033 100 098 051 Pre-fail Always - 0
- 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
- 12 Power_Cycle_Count 0x0032 096 096 000 Old_age Always - 4225
- 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 566
- 193 Load_Cycle_Count 0x0032 129 129 000 Old_age Always - 215661
- 194 Temperature_Celsius 0x0022 105 074 000 Old_age Always - 42
- 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
- 197 Current_Pending_Sector 0x0032 199 199 000 Old_age Always - 75
- 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
- 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
- 200 Multi_Zone_Error_Rate 0x0009 100 253 051 Pre-fail Offline - 0
- SMART Error Log Version: 1
- ATA Error Count: 5124 (device log contains only the most recent five errors)
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 5124 occurred at disk power-on lifetime: 22093 hours (920 days + 13 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 00 00 00 e0 Error: UNC at LBA = 0x00000000 = 0
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 08 00 00 00 00 00 01:21:34.150 READ DMA
- ef 10 02 00 00 00 00 00 01:21:34.150 SET FEATURES [Enable SATA feature]
- 27 00 00 00 00 00 00 00 01:21:34.149 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
- ec 00 00 00 00 00 00 00 01:21:34.149 IDENTIFY DEVICE
- ef 03 42 00 00 00 00 00 01:21:34.149 SET FEATURES [Set transfer mode]
- Error 5123 occurred at disk power-on lifetime: 22093 hours (920 days + 13 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 00 00 00 e0 Error: UNC at LBA = 0x00000000 = 0
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 20 00 00 00 00 00 01:21:31.202 READ DMA
- ef 10 02 00 00 00 00 00 01:21:31.202 SET FEATURES [Enable SATA feature]
- 27 00 00 00 00 00 00 00 01:21:31.202 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
- ec 00 00 00 00 00 00 00 01:21:31.201 IDENTIFY DEVICE
- ef 03 42 00 00 00 00 00 01:21:31.201 SET FEATURES [Set transfer mode]
- Error 5122 occurred at disk power-on lifetime: 22093 hours (920 days + 13 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 01 51 00 00 00 00 e0 Error: AMNF at LBA = 0x00000000 = 0
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 20 00 00 00 00 00 01:21:28.107 READ DMA
- ef 10 02 00 00 00 00 00 01:21:28.107 SET FEATURES [Enable SATA feature]
- 27 00 00 00 00 00 00 00 01:21:28.107 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
- ec 00 00 00 00 00 00 00 01:21:28.106 IDENTIFY DEVICE
- ef 03 42 00 00 00 00 00 01:21:28.106 SET FEATURES [Set transfer mode]
- Error 5121 occurred at disk power-on lifetime: 22093 hours (920 days + 13 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 01 51 00 00 00 00 e0 Error: AMNF at LBA = 0x00000000 = 0
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 20 00 00 00 00 00 01:21:25.014 READ DMA
- 25 00 08 a8 ea 42 25 00 01:21:25.014 READ DMA EXT
- ef 10 02 00 00 00 00 00 01:21:25.014 SET FEATURES [Enable SATA feature]
- 27 00 00 00 00 00 00 00 01:21:25.013 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
- ec 00 00 00 00 00 00 00 01:21:25.013 IDENTIFY DEVICE
- Error 5120 occurred at disk power-on lifetime: 22093 hours (920 days + 13 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 00 00 00 00 e0 Error: UNC at LBA = 0x00000000 = 0
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 08 00 00 00 00 00 01:21:21.767 READ DMA
- ef 10 02 00 00 00 00 00 01:21:21.767 SET FEATURES [Enable SATA feature]
- 27 00 00 00 00 00 00 00 01:21:21.767 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
- ec 00 00 00 00 00 00 00 01:21:21.766 IDENTIFY DEVICE
- ef 03 42 00 00 00 00 00 01:21:21.766 SET FEATURES [Set transfer mode]
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed: read failure 90% 22093 0
- # 2 Short offline Completed: read failure 90% 22093 0
- # 3 Short offline Completed: read failure 90% 22093 0
- # 4 Extended offline Completed: read failure 90% 22093 0
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement