Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000@0] Booting Linux on physical CPU 0x0
- [ 0.000000@0] Linux version 4.9.182 (relkai@hammbwcor01) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) ) #1 SMP PREEMPT Sat Aug 17 02:14:20 CEST 2019
- [ 0.000000@0] Boot CPU: AArch64 Processor [410fd034]
- [ 0.000000@0] Machine model: Amlogic S905X2
- [ 0.000000@0] efi: Getting EFI parameters from FDT:
- [ 0.000000@0] efi: UEFI not found.
- [ 0.000000@0] OF: reserved mem: __reserved_mem_alloc_size, start:0x0000000077800000, end:0x0000000078000000, len:8 MiB
- [ 0.000000@0] Reserved memory: created CMA memory pool at 0x0000000077800000, size 8 MiB
- [ 0.000000@0] OF: reserved mem: initialized node linux,meson-fb, compatible id shared-dma-pool
- [ 0.000000@0] Reserved memory: created CMA memory pool at 0x00000000e8800000, size 128 MiB
- [ 0.000000@0] OF: reserved mem: initialized node linux,ion-dev, compatible id shared-dma-pool
- [ 0.000000@0] Reserved memory: created CMA memory pool at 0x00000000e6000000, size 40 MiB
- [ 0.000000@0] OF: reserved mem: initialized node linux,di_cma, compatible id shared-dma-pool
- [ 0.000000@0] Reserved memory: created DMA memory pool at 0x00000000f0900000, size 0 MiB
- [ 0.000000@0] OF: reserved mem: initialized node linux,ppmgr, compatible id shared-dma-pool
- [ 0.000000@0] Reserved memory: created CMA memory pool at 0x00000000d2c00000, size 308 MiB
- [ 0.000000@0] OF: reserved mem: initialized node linux,codec_mm_cma, compatible id shared-dma-pool
- [ 0.000000@0] OF: reserved mem: initialized node linux,codec_mm_reserved, compatible id amlogic, codec-mm-reserved
- [ 0.000000@0] OF: reserved mem: __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB
- [ 0.000000@0] Reserved memory: created CMA memory pool at 0x0000000005000000, size 4 MiB
- [ 0.000000@0] OF: reserved mem: initialized node linux,secmon, compatible id shared-dma-pool
- [ 0.000000@0] cma: Reserved 8 MiB at 0x00000000d2400000
- [ 0.000000@0] On node 0 totalpages: 985088
- [ 0.000000@0] DMA zone: 15392 pages used for memmap
- [ 0.000000@0] DMA zone: 0 pages reserved
- [ 0.000000@0] DMA zone: 985088 pages, LIFO batch:31
- [ 0.000000@0] psci: probing for conduit method from DT.
- [ 0.000000@0] psci: PSCIv1.0 detected in firmware.
- [ 0.000000@0] psci: Using standard PSCI v0.2 function IDs
- [ 0.000000@0] psci: MIGRATE_INFO_TYPE not supported.
- [ 0.000000@0] psci: SMC Calling Convention v1.1
- [ 0.000000@0] percpu: Embedded 22 pages/cpu s52056 r8192 d29864 u90112
- [ 0.000000@0] pcpu-alloc: s52056 r8192 d29864 u90112 alloc=22*4096
- [ 0.000000@0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
- [ 0.000000@0] Detected VIPT I-cache on CPU0
- [ 0.000000@0] CPU features: enabling workaround for ARM erratum 845719
- [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 969696
- [ 0.000000@0] Kernel command line: rootfstype=ramfs init=/init console=ttyS0,115200 no_console_suspend earlyprintk=aml-uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 logo=osd0,loaded,0x3d800000 vout=1080p60hz,enable panel_type=lcd_1 hdmimode=1080p60hz frac_rate_policy=1 cvbsmode=576cvbs osd_reverse=0 video_reverse=0 androidboot.selinux=permissive androidboot.firstboot=0 jtag=disable androidboot.hardware=amlogic androidboot.serialno=m1381923a1303 mac=************ androidboot.mac=************* androidboot.rpmb_state=1 BOOT_IMAGE=kernel.img boot=LABEL=COREELEC disk=LABEL=STORAGE console=ttyS0,115200 console=tty0 no_console_suspend enable_wol=1 hdmitx=cec3f hk-lirc-helper.remotewakeup=0xbf40fe01 hk-lirc-helper.decode_type=0x0 # NEC hk-lirc-helper.remotewakeupmask=0xffffffff hdmimode=1080p60hz logo=osd0,loaded,0x3d800000 quiet console=tty0 systemd.show_status=auto
- [ 0.000000@0] fb: osd0
- [ 0.000000@0] fb: loaded
- [ 0.000000@0] fb: 0x3d800000
- [ 0.000000@0] lcd: panel_type: lcd_1
- [ 0.000000@0] vout: get hdmimode: 1080p60hz
- [ 0.000000@0] hdmitx: hdmitx boot frac_rate_policy: 1
- [ 0.000000@0] vout: get cvbsmode: 576cvbs
- [ 0.000000@0] vpp_axis_reverse: bootargs is 0
- [ 0.000000@0] DI: di_read_canvas_reverse: bootargs is 0.
- [ 0.000000@0] phlock_phase_config: bootargs is 0.
- [ 0.000000@0] hdmitx: hdmitx: android device found, setting cec mode to:0x3f
- [ 0.000000@0] hdmitx: HDMI hdmi_cec_func_config:0x3f
- [ 0.000000@0] vout: get hdmimode: 1080p60hz
- [ 0.000000@0] fb: osd0
- [ 0.000000@0] fb: loaded
- [ 0.000000@0] fb: 0x3d800000
- [ 0.000000@0] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000@0] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
- [ 0.000000@0] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
- [ 0.000000@0] Memory: 3328652K/3940352K available (11388K kernel code, 1628K rwdata, 9108K rodata, 4736K init, 1692K bss, 103796K reserved, 507904K cma-reserved)
- [ 0.000000@0] Virtual kernel memory layout:
- [ 0.000000@0] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
- [ 0.000000@0] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
- [ 0.000000@0] .text : 0xffffff8009080000 - 0xffffff8009ba0000 ( 11392 KB)
- [ 0.000000@0] .rodata : 0xffffff8009ba0000 - 0xffffff800a490000 ( 9152 KB)
- [ 0.000000@0] .init : 0xffffff800a490000 - 0xffffff800a930000 ( 4736 KB)
- [ 0.000000@0] .data : 0xffffff800a930000 - 0xffffff800aac7200 ( 1629 KB)
- [ 0.000000@0] .bss : 0xffffff800aac7200 - 0xffffff800ac6e47c ( 1693 KB)
- [ 0.000000@0] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB)
- [ 0.000000@0] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
- [ 0.000000@0] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)
- [ 0.000000@0] 0xffffffbf00004000 - 0xffffffbf03c24000 ( 60 MB actual)
- [ 0.000000@0] memory : 0xffffffc000100000 - 0xffffffc0f0900000 ( 3848 MB)
- [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000@0] Preemptible hierarchical RCU implementation.
- [ 0.000000@0] Build-time adjustment of leaf fanout to 64.
- [ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
- [ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
- [ 0.000000@0] NR_IRQS:64 nr_irqs:64 0
- [ 0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized
- [ 0.000000@0] g12a_aoclkc_init: register ao clk ok!
- [ 0.000000@0] Meson chip version = RevB (28:B - 40:0)
- [ 0.000000@0] meson_g12a_sdemmc_init: register amlogic sdemmc clk
- [ 0.000000@0] meson_g12a_sdemmc_init: register amlogic sdemmc clk
- [ 0.000000@0] meson_g12a_gpu_init: register meson gpu clk
- [ 0.000000@0] meson_g12a_media_init: register meson media clk
- [ 0.000000@0] meson_g12a_misc_init: register amlogic g12a misc clks
- [ 0.000000@0] meson_g12a_misc_init: done.
- [ 0.000000@0] g12a_clkc_init initialization complete
- [ 0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys).
- [ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
- [ 0.000004@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
- [ 0.000027@0] meson_bc_timer: mclk->mux_reg =ffffff800800c190,mclk->reg =ffffff800800e194
- [ 0.000499@0] Console: colour dummy device 80x25
- [ 0.000512@0] console [tty0] enabled
- [ 0.000526@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
- [ 0.000533@0] pid_max: default: 32768 minimum: 301
- [ 0.000620@0] Security Framework initialized
- [ 0.000627@0] SELinux: Initializing.
- [ 0.000665@0] SELinux: Starting in permissive mode
- [ 0.000695@0] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.000702@0] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.001351@0] ftrace: allocating 37611 entries in 147 pages
- [ 0.062967@0] sched-energy: CPU device node has no sched-energy-costs
- [ 0.062975@0] CPU0: update cpu_capacity 1024
- [ 0.062986@0] ASID allocator initialised with 65536 entries
- [ 0.094799@0] EFI services will not be available.
- [ 0.142959@1] Detected VIPT I-cache on CPU1
- [ 0.143012@1] CPU1: update cpu_capacity 1024
- [ 0.143014@1] CPU1: Booted secondary processor [410fd034]
- [ 0.175001@2] Detected VIPT I-cache on CPU2
- [ 0.175029@2] CPU2: update cpu_capacity 1024
- [ 0.175031@2] CPU2: Booted secondary processor [410fd034]
- [ 0.207069@3] Detected VIPT I-cache on CPU3
- [ 0.207094@3] CPU3: update cpu_capacity 1024
- [ 0.207097@3] CPU3: Booted secondary processor [410fd034]
- [ 0.207160@0] Brought up 4 CPUs
- [ 0.207164@0] SMP: Total of 4 processors activated.
- [ 0.207169@0] CPU features: detected feature: 32-bit EL0 Support
- [ 0.207244@0] CPU: All CPU(s) started at EL2
- [ 0.207264@0] alternatives: patching kernel code
- [ 0.208531@0] devtmpfs: initialized
- [ 0.229475@0] DMI not present or invalid.
- [ 0.229743@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
- [ 0.229755@0] futex hash table entries: 1024 (order: 4, 65536 bytes)
- [ 0.241278@0] pinctrl core: initialized pinctrl subsystem
- [ 0.242183@0] NET: Registered protocol family 16
- [ 0.244859@0] schedtune: init normalization constants...
- [ 0.244862@0] schedtune: no energy model data
- [ 0.244864@0] schedtune: disabled!
- [ 0.263233@0] cpuidle: using governor menu
- [ 0.263310@0] register canvas platform driver
- [ 0.263338@0] register rdma platform driver
- [ 0.263362@0] aml_vdac_init: module init
- [ 0.266030@0] vdso: 2 pages (1 code @ ffffff8009ba7000, 1 data @ ffffff800a935000)
- [ 0.266045@0] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
- [ 0.266970@0] DMA: preallocated 2048 KiB pool for atomic allocations
- [ 0.267136@0] clkmsr: clkmsr: driver init
- [ 0.267138@0] codec_mm_module_init
- [ 0.267184@0] media_configs_system_init
- [ 0.268944@0] aml_iomap: amlogic iomap probe done
- [ 0.269328@0] vpu: driver version: v20190329(7-g12a)
- [ 0.269334@0] vpu: load vpu_clk: 666666667Hz(7)
- [ 0.269541@0] vpu: clktree_init
- [ 0.269589@0] vpu: vpu_probe OK
- [ 0.273089@0] clkmsr: msr_clk_reg0=ffffff8008238004,msr_clk_reg2=ffffff800823a00c
- [ 0.273097@0] clkmsr: msr_ring_reg0=ffffff800823c5fc
- [ 0.276301@0] aml_vdac_probe:probe start.cpu_id:6,name:meson-g12ab-vdac
- [ 0.276483@0] aml_vdac_probe: ok
- [ 0.276594@0] canvas_probe reg=00000000ff638000,size=2000
- [ 0.276610@0] canvas maped reg_base =ffffff8008268000
- [ 0.282191@0] rdma_probe,cpu_type:1, ver:0, len:8
- [ 0.282449@0] rdma_register, rdma_table_addr ffffff8008277000 rdma_table_addr_phy d2600000 reg_buf ffffffc0cda48000
- [ 0.282453@0] rdma_register success, handle 1 table_size 32768
- [ 0.282456@0] set_rdma_handle video rdma handle = 1.
- [ 0.283153@0] aml_snd_reg_map[0], reg:ff640000, size:2000
- [ 0.283164@0] aml_snd_reg_map[1], reg:ff642000, size:2000
- [ 0.283172@0] aml_snd_reg_map[2], reg:ff64a000, size:2000
- [ 0.283180@0] aml_snd_reg_map[3], reg:ff642800, size:1800
- [ 0.283191@0] aml_snd_reg_map[4], reg:ffd01000, size:1000
- [ 0.283193@0] amlogic auge_snd_iomap probe done
- [ 0.284477@0] cvbs_out: cvbsout_probe, cpu_id:4,name:meson-g12a-cvbsout
- [ 0.284490@0] cvbs_out: clk path:0
- [ 0.284492@0] cvbs_out: error: failed to get vdac_config
- [ 0.284670@0] vout: vout1: register server: cvbs_vout_server
- [ 0.284673@0] cvbs_out: register cvbs module server ok
- [ 0.284675@0] vout: vout2: register server: cvbs_vout2_server
- [ 0.284677@0] cvbs_out: register cvbs module vout2 server ok
- [ 0.284683@0] cvbs_out: chrdev devno 264241152 for disp
- [ 0.284883@0] cvbs_out: create cdev cvbs
- [ 0.284886@0] cvbs_out: cvbsout_probe OK
- [ 0.285349@0] codec_mm codec_mm: assigned reserved memory node linux,codec_mm_cma
- [ 0.285417@0] codec_mm codec_mm: assigned reserved memory node linux,codec_mm_cma
- [ 0.285419@0] codec_mm_probe ok
- [ 0.469304@3] SCSI subsystem initialized
- [ 0.469523@3] usbcore: registered new interface driver usbfs
- [ 0.469569@3] usbcore: registered new interface driver hub
- [ 0.469654@3] usbcore: registered new device driver usb
- [ 0.469782@3] pps_core: LinuxPPS API ver. 1 registered
- [ 0.469785@3] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 0.469806@3] PTP clock support registered
- [ 0.469957@3] dmi: Firmware registration failed.
- [ 0.470255@3] secmon: reserve_mem_size:0x300000
- [ 0.470361@3] secmon secmon: assigned reserved memory node linux,secmon
- [ 0.470364@3] secmon: can't fine clear_range
- [ 0.470561@3] secmon: get page:ffffffbf00140000, 5000
- [ 0.470566@3] secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000
- [ 0.470568@3] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000
- [ 0.471412@3] hdmitx: system: amhdmitx_probe start
- [ 0.471415@3] hdmitx: system: Ver: 20181019
- [ 0.471449@3] hdmitx: system: hdmitx_device.chip_type : 10
- [ 0.471452@3] hdmitx: system: hdmitx_device.dongle_mode: 0
- [ 0.471486@3] hdmitx: system: not find product desc
- [ 0.471488@3] hdmitx: system: not find match pwr-ctl
- [ 0.471518@3] hdmitx: system: hdmitx_device.drm_feature : 0
- [ 0.471543@3] hdmitx: system: hpd irq = 30
- [ 0.471635@3] hdmitx: system: hdcp22_tx_skp failed to probe
- [ 0.471639@3] hdmitx: system: hdcp22_tx_esm failed to probe
- [ 0.472082@3] vout: vout1: register server: hdmitx_vout_server
- [ 0.472086@3] vout: vout2: register server: hdmitx_vout2_server
- [ 0.472525@3] hdmitx: hdmitx20: Mapped PHY: 0xffd00000
- [ 0.472535@3] hdmitx: hdmitx20: Mapped PHY: 0xff634400
- [ 0.472542@3] hdmitx: hdmitx20: Mapped PHY: 0xff900000
- [ 0.472560@3] hdmitx: hdmitx20: Mapped PHY: 0xff800000
- [ 0.472567@3] hdmitx: hdmitx20: Mapped PHY: 0xff63c000
- [ 0.472571@3] hdmitx: hdmitx20: Mapped PHY: 0xffd00000
- [ 0.472574@3] hdmitx: hdmitx20: Mapped PHY: 0xff608000
- [ 0.472578@3] hdmitx: hdmitx20: Mapped PHY: 0xff600000
- [ 0.472582@3] hdmitx: hdmitx20: Mapped PHY: 0xffe01000
- [ 0.472591@3] hdmitx: hw: alread display in uboot 0x10
- [ 0.472620@3] hdmitx: hw: avmute set to 1
- [ 0.472700@3] hdmitx: system: amhdmitx_probe end
- [ 0.473406@3] vout: create vout attribute OK
- [ 0.473564@2] vout: vout_fops_create OK
- [ 0.473568@2] vout: vout1: register server: nulldisp_vout_server
- [ 0.473594@2] hdmitx: hdmitx_set_current_vmode[3655]
- [ 0.473596@2] hdmitx: system: recalc before 1080p60hz 60 1
- [ 0.473600@2] hdmitx: system: recalc after 1080p60hz 2997 50
- [ 0.473605@2] hdmitx: system: get current mode: 1080p60hz
- [ 0.473608@2] hdmitx: system: update rx hdr info 0
- [ 0.473612@2] hdmitx: system: update physcial size: 16 9
- [ 0.473630@2] hdmitx: system: [set_disp_mode_auto] ALREADY init VIC = 16
- [ 0.473634@2] vout: init mode 1080p60hz set ok
- [ 0.473735@2] vout: aml_tvout_mode_monitor
- [ 0.473748@2] vout: aml_vout_probe OK
- [ 0.473980@2] chip type:0x28
- [ 0.474431@2] MEMORY:[100000+f0800000]
- [ 0.474437@2] ramdump_probe, storage device:data
- [ 0.474440@2] NO valid ramdump args:0 0
- [ 0.474451@2] ramdump_probe, set sticky to 8f09
- [ 0.474623@2] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.475514@2] NetLabel: Initializing
- [ 0.475518@2] NetLabel: domain hash size = 128
- [ 0.475520@2] NetLabel: protocols = UNLABELED CIPSOv4
- [ 0.475566@2] NetLabel: unlabeled traffic allowed by default
- [ 0.478466@2] clocksource: Switched to clocksource arch_sys_counter
- [ 0.480549@0] hdmitx: system: irq 80000004 0
- [ 0.500585@0] hdmitx: system: irq 80000002 0
- [ 0.543681@0] VFS: Disk quotas dquot_6.6.0
- [ 0.543779@0] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 0.555674@0] NET: Registered protocol family 2
- [ 0.556395@0] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
- [ 0.556609@0] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
- [ 0.557286@0] TCP: Hash tables configured (established 32768 bind 32768)
- [ 0.557415@0] UDP hash table entries: 2048 (order: 4, 65536 bytes)
- [ 0.557490@0] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
- [ 0.557794@0] NET: Registered protocol family 1
- [ 0.559991@0] wifi: power_on_pin_OD = 0;
- [ 0.560006@0] aml_wifi wifi: [wifi_dev_probe] no power_on_pin2
- [ 0.560141@0] meson-pwm ffd19000.pwm: pwm pinmux : can't get pinctrl
- [ 0.560190@0] meson-pwm ffd19000.pwm: pwm pinmux : can't get pinctrl
- [ 0.560205@0] aml_wifi wifi: [pwm_double_channel_conf_dt] wifi pwm dt ok
- [ 0.560226@0] aml_wifi wifi: [pwm_double_channel_conf] wifi pwm conf ok
- [ 0.560230@0] aml_wifi wifi: [wifi_dev_probe] dhd_static_buf setup
- [ 0.560234@0] Wifi: bcmdhd_init_wlan_mem: bcmdhd_init_wlan_mem 1.579.77.41.9
- [ 0.560617@0] Wifi: bcmdhd_init_wlan_mem: bcmdhd_init_wlan_mem prealloc ok
- [ 0.560622@0] aml_wifi wifi: [wifi_dev_probe] interrupt_pin=483
- [ 0.560626@0] aml_wifi wifi: [wifi_dev_probe] irq_num=0, irq_trigger_type=1
- [ 0.560630@0] aml_wifi wifi: [wifi_dev_probe] power_on_pin=482
- [ 0.560634@0] aml_wifi wifi: [wifi_dev_probe] clock_32k_pin=0
- [ 0.560951@0] aml_wifi wifi: [wifi_setup_dt] wifi_setup_dt
- [ 0.561083@0] aml_wifi wifi: [wifi_setup_dt] irq num is:(52)
- [ 0.561088@0] aml_wifi wifi: [wifi_setup_dt] interrupt_pin(483)
- [ 0.561105@0] aml_wifi wifi: [wifi_setup_dt] power_on_pin(482)
- [ 0.561289@0] Unpacking initramfs...
- [ 0.579430@0] Freeing initrd memory: 4636K
- [ 0.582560@0] hw perfevents: clusterb_enabled = 0
- [ 0.582570@0] hw perfevents: cpumasks 0xf, 0x0
- [ 0.582614@0] hw perfevents: cluster A irq = 10
- [ 0.582737@0] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
- [ 0.585933@0] audit: initializing netlink subsys (disabled)
- [ 0.586013@0] audit: type=2000 audit(0.540:1): initialized
- [ 0.586956@1] workingset: timestamp_bits=46 max_order=20 bucket_order=0
- [ 0.597601@3] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.597856@3] Registering sdcardfs 0.1
- [ 0.599566@1] SELinux: Registering netfilter hooks
- [ 0.603783@1] NET: Registered protocol family 38
- [ 0.603799@1] Key type asymmetric registered
- [ 0.603803@1] Asymmetric key parser 'x509' registered
- [ 0.604151@1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
- [ 0.604160@1] io scheduler noop registered (default)
- [ 0.604164@1] io scheduler deadline registered
- [ 0.604354@1] io scheduler cfq registered
- [ 0.605940@1] meson-pwm ff802000.pwm: pwm pinmux : can't get pinctrl
- [ 0.607284@3] random: fast init done
- [ 0.607335@3] random: crng init done
- [ 0.607634@1] [drm] Initialized
- [ 0.607738@1] mali ffe40000.bifrost: Continuing without Mali regulator control
- [ 0.607941@1] mali ffe40000.bifrost: max pp is 2
- [ 0.607947@1] mali ffe40000.bifrost: set min pp to default 1
- [ 0.607950@1] mali ffe40000.bifrost: min pp is 1
- [ 0.607955@1] mali ffe40000.bifrost: min clk is 4
- [ 0.607980@1] mali ffe40000.bifrost: hiu io source 0xffffff80083b9000
- [ 0.607988@1] mali ffe40000.bifrost: hiu io source 0xffffff80083bb000
- [ 0.607992@1] mali ffe40000.bifrost: num of pp used most of time 1
- [ 0.607996@1] mali ffe40000.bifrost: clock dvfs cfg table size is 4
- [ 0.608086@1] mali ffe40000.bifrost: max clk set 2
- [ 0.608091@1] mali ffe40000.bifrost: max clk is 2
- [ 0.608095@1] mali ffe40000.bifrost: turbo clk set to 3
- [ 0.608098@1] mali ffe40000.bifrost: turbo clk is 3
- [ 0.608103@1] mali ffe40000.bifrost: default clk is 1
- [ 0.608110@1] mali ffe40000.bifrost: ====================0====================
- [ 0.608110@1] clk_freq= 285714285, clk_parent=fclk_div7, voltage=1150, keep_count=2, threshod=<100 200>, clk_sample=285
- [ 0.608116@1] mali ffe40000.bifrost: ====================1====================
- [ 0.608116@1] clk_freq= 666666666, clk_parent=fclk_div3, voltage=1150, keep_count=1, threshod=<85 200>, clk_sample=666
- [ 0.608124@1] mali ffe40000.bifrost: ====================2====================
- [ 0.608124@1] clk_freq= 846000000, clk_parent= gp0_pll, voltage=1150, keep_count=1, threshod=<179 255>, clk_sample=846
- [ 0.608130@1] mali ffe40000.bifrost: ====================3====================
- [ 0.608130@1] clk_freq= 846000000, clk_parent= gp0_pll, voltage=1150, keep_count=1, threshod=<179 255>, clk_sample=846
- [ 0.608134@1] mali ffe40000.bifrost: clock dvfs table size is 4
- [ 0.608287@1] mali_plat=ffffff800a9bc108
- [ 0.608481@1] meson_gcooldev is null, no set min status
- [ 0.608485@1] gpu cooling register okay with err=0
- [ 0.608564@1] meson_gcooldev is null, no set min status
- [ 0.608567@1] gpu core cooling register okay with err=0
- [ 0.608599@1] shader_present=1, tiler_present=1, l2_present=1
- [ 0.608700@1] Mali_pwr_on:gpu_irq : 200
- [ 0.609018@1] mali ffe40000.bifrost: GPU identified as 0x3 arch 7.0.9 r0p0 status 0
- [ 0.610827@1] mali ffe40000.bifrost: Probed as mali0
- [ 0.611568@1] Unable to detect cache hierarchy for CPU 0
- [ 0.617546@1] loop: module loaded
- [ 0.618303@0] zram: Added device: zram0
- [ 0.618871@0] mtdoops: mtd device (mtddev=name/number) must be supplied
- [ 0.619654@0] libphy: Fixed MDIO Bus: probed
- [ 0.620672@0] REG0:Addr = ffffff80083d1540
- [ 0.620684@0] Not set cali_val for REG1
- [ 0.621141@0] meson6-dwmac ff3f0000.ethernet: no reset control found
- [ 0.621146@0] stmmac - user ID: 0x11, Synopsys ID: 0x37
- [ 0.621148@0] Ring mode enabled
- [ 0.621153@0] DMA HW capability register supported
- [ 0.621157@0] Normal descriptors
- [ 0.621158@0] RX Checksum Offload Engine supported
- [ 0.621161@0] COE Type 2
- [ 0.621162@0] TX Checksum insertion supported
- [ 0.621164@0] Wake-Up On Lan supported
- [ 0.621210@0] Enable RX Mitigation via HW Watchdog Timer
- [ 0.624426@0] libphy: stmmac: probed
- [ 0.624439@0] eth%d: PHY ID 001cc916 at 0 IRQ POLL (stmmac-0:00) active
- [ 0.624443@0] eth%d: PHY ID 001cc916 at 7 IRQ POLL (stmmac-0:07)
- [ 0.626329@0] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.626339@0] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 0.627050@0] usbcore: registered new interface driver cdc_acm
- [ 0.627057@0] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
- [ 0.627136@0] usbcore: registered new interface driver usb-storage
- [ 0.627295@0] usbcore: registered new interface driver usbserial
- [ 0.627342@0] usbcore: registered new interface driver usbserial_generic
- [ 0.627385@0] usbserial: USB Serial support registered for generic
- [ 0.627942@1] mousedev: PS/2 mouse device common for all mice
- [ 0.628382@0] i2c /dev entries driver
- [ 0.630934@3] ledtrig-cpu: registered to indicate activity on CPUs
- [ 0.631359@3] hidraw: raw HID events driver (C) Jiri Kosina
- [ 0.631842@1] usbcore: registered new interface driver usbhid
- [ 0.631846@1] usbhid: USB HID core driver
- [ 0.632752@1] value of voltage_tolerance 0
- [ 0.633746@1] cpu cpu0: meson_cpufreq_init: CPU 0 initialized
- [ 0.635475@1] ff803000.serial: clock gate not found
- [ 0.635574@1] meson_uart ff803000.serial: ==uart0 reg addr = ffffff80083d5000
- [ 0.635627@1] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 20, base_baud = 1500000) is a meson_uart
- [ 0.635640@1] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 0 to 115200
- [ 0.679029@1] console [ttyS0] enabled
- [ 0.680098@0] meson_uart ffd24000.serial: ==uart1 reg addr = ffffff80083d7000
- [ 0.680184@0] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 29, base_baud = 1500000) is a meson_uart
- [ 0.681789@3] amlogic-new-usb2-v2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff80083fa000
- [ 0.682180@3] amlogic-new-usb3-v2 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff80083fe080
- [ 0.684239@3] aml_dma ff63e000.aml_dma: Aml dma
- [ 0.686317@3] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma
- [ 0.686975@1] aml_tdes_dma ff63e000.aml_dma:aml_tdes: Aml TDES_dma
- [ 0.687826@1] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma
- [ 0.688114@1] meson-remote: Driver init
- [ 0.688263@1] meson-remote: IR XMP protocol handler initialized
- [ 0.690903@0] ion_dev soc:ion_dev: assigned reserved memory node linux,ion-dev
- [ 0.691674@0] ge2d: ge2d_init_module
- [ 0.691967@0] ge2d: ge2d_dev major:238
- [ 0.692345@1] ge2d: clock source clk_ge2d_gate ffffffc0cdbea3c0
- [ 0.692382@1] ge2d: clock clk_ge2d source ffffffc0cdbea800
- [ 0.692400@1] ge2d: clock source clk_vapb_0 ffffffc0cdbeaf80
- [ 0.692406@1] ge2d: ge2d init clock is 500000000 HZ, VPU clock is 666666656 HZ
- [ 0.692564@1] ge2d: ge2d clock is 499 MHZ
- [ 0.692577@1] ge2d: find address resource
- [ 0.692600@1] ge2d: map io source 0x00000000ff940000,size=65536 to 0xffffff8008520000
- [ 0.692604@1] ge2d: reserved mem init failed
- [ 0.692607@1] ge2d: ge2d: pdev=ffffffc0cda0d400, irq=33, clk=ffffffc0cdbea3c0
- [ 0.692679@1] ge2d: ge2d start monitor
- [ 0.692774@1] ge2d: ge2d workqueue monitor start
- [ 0.693483@0] amvideom vsync irq: 34
- [ 0.694744@0] fb: osd_init_module
- [ 0.695127@0] fb: viu vsync irq: 34
- [ 0.695138@0] fb: viu2 vsync irq: 42
- [ 0.695340@0] 0x000000d8:Y=d8,U=0,V=0
- [ 0.695342@0] 0x000000d9:Y=d9,U=0,V=0
- [ 0.695344@0] 0x000000da:Y=da,U=0,V=0
- [ 0.695346@0] 0x000000db:Y=db,U=0,V=0
- [ 0.695857@0] fb: osd_rdma_init: rdma_table p=0xd2608000,op=0xd2608000 , v=0xffffff8008511000
- [ 0.695918@0] rdma_register, rdma_table_addr ffffff8008513000 rdma_table_addr_phy d2609000 reg_buf ffffffc0cdae4000
- [ 0.695921@0] rdma_register success, handle 2 table_size 4096
- [ 0.695925@0] fb: osd_rdma_init:osd rdma handle = 2.
- [ 0.695946@0] fb: mem_size: 0x800000
- [ 0.695948@0] fb: mem_size: 0x4b80000
- [ 0.695949@0] fb: mem_size: 0x100000
- [ 0.695950@0] fb: mem_size: 0x100000
- [ 0.695951@0] fb: mem_size: 0x800000
- [ 0.696117@0] meson-fb meson-fb: assigned reserved memory node linux,meson-fb
- [ 0.696122@0] fb: reserved memory base:0x0000000077800000, size:800000
- [ 0.696419@0] fb: fb def : 1920 1080 1920 2160 32
- [ 0.696421@0] fb: init fbdev bpp is:32
- [ 0.709869@0] fb: osd[0] enable: 1 (swapper/0)
- [ 0.727614@1] fb: set osd0 reverse as NONE
- [ 0.743187@0] fb: osd probe OK
- [ 0.743568@0] hdmitx: hdcp: hdmitx_hdcp_init
- [ 0.744489@0] vout: vout2: create vout2 attribute OK
- [ 0.744725@1] vout: vout2: vout2_fops_create OK
- [ 0.744728@1] vout: vout2: register server: nulldisp_vout2_server
- [ 0.744741@1] vout: vout2: init mode null set ok
- [ 0.745071@1] vout: vout2: clktree_init
- [ 0.745187@1] vout: vout2: aml_vout2_probe OK
- [ 0.745380@1] DI: di_module_init ok.
- [ 0.745387@1] DI: di_module_init: major 235
- [ 0.745953@3] deinterlace deinterlace: assigned reserved memory node linux,di_cma
- [ 0.745964@3] DI: CMA size 0x2800000.
- [ 0.745997@3] pre_irq:48
- [ 0.746004@3] post_irq:49
- [ 0.746006@3] DI: di_probe allocate rdma channel 0.
- [ 0.746014@3] di_get_vpu_clkb: get clk vpu error.
- [ 0.746072@3] DI: vpu clkb <334000000, 667000000>
- [ 0.746131@3] DI:enable vpu clkb.
- [ 0.746145@3] 0x000000dc:Y=dc,U=0,V=0
- [ 0.746147@3] 0x000000dd:Y=dd,U=0,V=0
- [ 0.746149@3] 0x000000de:Y=de,U=0,V=0
- [ 0.746151@3] 0x000000df:Y=df,U=0,V=0
- [ 0.746152@3] 0x000000e0:Y=e0,U=0,V=0
- [ 0.746154@3] 0x000000e1:Y=e1,U=0,V=0
- [ 0.746156@3] 0x000000e2:Y=e2,U=0,V=0
- [ 0.746157@3] 0x000000e3:Y=e3,U=0,V=0
- [ 0.746159@3] 0x000000f0:Y=f0,U=0,V=0
- [ 0.746161@3] 0x000000f1:Y=f1,U=0,V=0
- [ 0.746165@3] 0x000000f2:Y=f2,U=0,V=0
- [ 0.746167@3] 0x000000f3:Y=f3,U=0,V=0
- [ 0.746169@3] 0x000000f4:Y=f4,U=0,V=0
- [ 0.746171@3] 0x000000f5:Y=f5,U=0,V=0
- [ 0.746173@3] 0x000000f6:Y=f6,U=0,V=0
- [ 0.746174@3] 0x000000f7:Y=f7,U=0,V=0
- [ 0.746177@3] 0x000000f8:Y=f8,U=0,V=0
- [ 0.746179@3] 0x000000f9:Y=f9,U=0,V=0
- [ 0.746181@3] 0x000000fa:Y=fa,U=0,V=0
- [ 0.746183@3] 0x000000fb:Y=fb,U=0,V=0
- [ 0.746184@3] 0x000000fc:Y=fc,U=0,V=0
- [ 0.746186@3] 0x000000fd:Y=fd,U=0,V=0
- [ 0.746189@3] 0x000000fe:Y=fe,U=0,V=0
- [ 0.746192@3] DI: support post write back 254.
- [ 0.746437@3] DI: di_probe:Di use HRTIMER
- [ 0.746680@1] di_probe:ok
- [ 0.746843@1] vdin_drv_init: major 511
- [ 0.747232@1] vdin_drv_init: vdin driver init done
- [ 0.747236@1] [viuin..]viuin_init_module viuin module init
- [ 0.747661@1] [viuin..]viuin_probe probe ok.
- [ 0.748138@1] [RX]-hdmirx: hdmirx_init.
- [ 0.748142@1] ESM HLD: Initializing...
- [ 0.748352@3] tvin_afe: tvafe_drv_init: major 509
- [ 0.748638@3] tvin_afe: tvafe_drv_init.
- [ 0.748817@3] tvafe_vbi: vbi: vbi_init.
- [ 0.748969@3] PPMGRDRV: warn: ppmgr module init func called
- [ 0.749083@3] PPMGRDRV: err: ppmgr_driver_probe called
- [ 0.750395@3] Reserved memory: failed to init DMA memory pool at 0x00000000f0900000, size 0 MiB
- [ 0.759063@3] PPMGRDRV: info: ppmgr_dev major:507
- [ 0.760174@0] picdec_driver_probe called.
- [ 0.760613@3] picdec: probe of picdec failed with error -22
- [ 0.760885@1] videosync_create_instance dev_s ffffffc0b63f8c00,dev_s->dev ffffffc0ab451800
- [ 0.760887@1] videosync_create_instance reg videosync.0
- [ 0.760997@1] aml_vecm_init:module init
- [ 0.761001@0] videosync_thread started
- [ 0.761413@1]
- [ 0.761413@1] VECM probe start
- [ 0.761750@3] Can't find wb_sel.
- [ 0.761751@3] hdr:Can't find cfg_en_osd_100.
- [ 0.761755@3] amlogic, vecm
- [ 0.761757@3] vlock dt support: 1
- [ 0.761759@3] vlock dt new_fsm: 0
- [ 0.761760@3] vlock dt hwver: 0
- [ 0.761761@3] vlock dt phlock_en: 0
- [ 0.761763@3] Can't find vlock_en.
- [ 0.761765@3] Can't find vlock_mode.
- [ 0.761766@3] Can't find vlock_pll_m_limit.
- [ 0.761767@3] Can't find vlock_line_limit.
- [ 0.761780@3] param_config vlock_en:1
- [ 0.761814@3] vlock_status_init vlock_en:0
- [ 0.761816@3] aml_vecm_probe: ok
- [ 0.762655@3] meson-mmc: mmc driver version: 3.02, 2017-05-15: New Emmc Host Controller
- [ 0.764002@3] meson-mmc: >>>>>>>>hostbase ffffff8008531000, dmode
- [ 0.765461@3] meson-mmc: actual_clock :400000, HHI_nand: 0x80
- [ 0.765466@3] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000033c
- [ 0.765509@3] meson-mmc: emmc: fixdiv calc done: adj = 2d2000
- [ 0.802531@3] meson-mmc: meson_mmc_probe() : success!
- [ 0.810306@0] meson-mmc: >>>>>>>>hostbase ffffff800853a000, dmode
- [ 0.810996@0] meson-mmc: gpio_cd = 1ca
- [ 0.851739@0] meson-mmc: >>>>>>>>hostbase ffffff800853a000, dmode
- [ 0.852685@0] meson-mmc: actual_clock :400000, HHI_nand: 0x80
- [ 0.852689@0] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000033c
- [ 0.890540@0] meson-mmc: meson_mmc_probe() : success!
- [ 0.891171@0] amlogic mtd driver init
- [ 0.892265@1] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0
- [ 0.892451@1] input: aml_vkeypad as /devices/platform/rtc/input/input0
- [ 0.894219@3] meson-aml-mmc ffe07000.emmc: divider requested rate 200000000 != actual rate 199999997: ret=0
- [ 0.894228@3] meson-mmc: actual_clock :199999997, HHI_nand: 0x80
- [ 0.894231@3] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x10000345
- [ 0.894241@3] meson-mmc: Data 1 aligned delay is 0
- [ 0.894245@3] meson-mmc: emmc: clk 199999997 tuning start
- [ 0.894524@0] cectx ff80023c.aocec: cec driver date:Ver 2019/3/25
- [ 0.894524@0]
- [ 0.897129@0] cectx ff80023c.aocec: compatible:amlogic, aocec-g12a
- [ 0.902839@0] cectx ff80023c.aocec: cecb_ver:0x1
- [ 0.907419@0] cectx ff80023c.aocec: line_reg:0x1
- [ 0.912121@0] cectx ff80023c.aocec: line_bit:0x3
- [ 0.916591@0] cectx ff80023c.aocec: ee_to_ao:0x1
- [ 0.921520@0] input: cec_input as /devices/virtual/input/input1
- [ 0.922037@3] cectx ff80023c.aocec: not find 'port_num'
- [ 0.926501@3] cectx ff80023c.aocec: using cec:1
- [ 0.930981@3] cectx ff80023c.aocec: no hdmirx regs
- [ 0.935672@3] cectx ff80023c.aocec: no hhi regs
- [ 0.940233@3] cectx ff80023c.aocec: not find 'output'
- [ 0.946195@3] meson-mmc: emmc: rx_tuning_result[0] = 40
- [ 0.946739@1] cectx ff80023c.aocec: irq cnt:2
- [ 0.950063@0] cectx ff80023c.aocec: wakeup_reason:0x0
- [ 0.954684@0] cectx ff80023c.aocec: cev val1: 0x0;val2: 0x0
- [ 0.960221@0] cectx ff80023c.aocec: aml_cec_probe success end
- [ 0.966432@3] meson-mmc: emmc: rx_tuning_result[1] = 40
- [ 0.966451@0] unifykey: storage in base: 0xffffffc005000000
- [ 0.966475@0] unifykey: storage out base: 0xffffffc005040000
- [ 0.966478@0] unifykey: storage block base: 0xffffffc005080000
- [ 0.966480@0] unifykey: probe done!
- [ 0.966695@3] meson-mmc: Tuning transfer error: nmatch=0 tuning_err:0xffffffac
- [ 0.967075@0] unifykey: no efuse-version set, use default value: -1
- [ 0.967077@0] unifykey: key unify config unifykey-num is 16
- [ 0.967175@0] unifykey: key unify fact unifykey-num is 16
- [ 0.967191@0] unifykey: unifykey_devno: 1f600000
- [ 0.967569@1] unifykey: device unifykeys created ok
- [ 0.967657@1] unifykey: aml_unifykeys_init done!
- [ 0.967805@1] meson ts init
- [ 0.967965@1] tsensor id: 0
- [ 0.968247@1] tsensor trim info: 0xda0080fa!
- [ 0.968251@1] tsensor hireboot: 0xc0ff2b00
- [ 0.968385@1] meson ts init
- [ 0.968407@1] tsensor id: 1
- [ 0.968514@1] tsensor trim info: 0xda0080d0!
- [ 0.968515@1] tsensor hireboot: 0xc0ff2af0
- [ 0.968807@1] audio_dsp: [dsp]register dsp to char divece(257)
- [ 0.969199@1] amaudio: amaudio: driver amaudio init!
- [ 0.969703@1] amaudio: amaudio_init - amaudio: driver amaudio succuess!
- [ 0.970779@1] sysled: module init
- [ 0.971210@1] meson_wdt ffd0f0d0.watchdog: start watchdog
- [ 0.971212@1] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog
- [ 0.971563@0] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done
- [ 0.972171@0] amlogic rfkill init
- [ 0.972333@0] enter bt_probe of_node
- [ 0.972394@0] not get gpio_en
- [ 0.972406@0] power on valid level is high
- [ 0.972406@0] bt: power_on_pin_OD = 0;
- [ 0.972408@0] bt: power_off_flag = 1;
- [ 0.972409@0] dis power down = 0;
- [ 0.974384@3] meson-mmc: emmc: rx_tuning_result[3] = 40
- [ 0.975517@3] meson-mmc: emmc: rx_tuning_result[4] = 40
- [ 0.975521@3] meson-mmc: emmc: best_win_start =3, best_win_size =4
- [ 0.975525@3] meson-mmc: emmc: sd_emmc_regs->gclock=0x10000345,sd_emmc_regs->gadjust=0x2000
- [ 0.975632@3] emmc: new HS200 MMC card at address 0001
- [ 0.975638@3] emmc: clock 199999997, 8-bit-bus-width
- [ 0.975638@3]
- [ 0.980504@3] mmcblk0: emmc:0001 CJNB4R 58.2 GiB
- [ 0.980754@3] mmcblk0boot0: emmc:0001 CJNB4R partition 1 4.00 MiB
- [ 0.980960@3] mmcblk0boot1: emmc:0001 CJNB4R partition 2 4.00 MiB
- [ 0.981182@3] mmcblk0rpmb: emmc:0001 CJNB4R partition 3 4.00 MiB
- [ 0.982816@3] meson-mmc: Enter aml_emmc_partition_ops
- [ 0.983321@3] meson-mmc: [mmc_read_partition_tbl] mmc read partition OK!
- [ 0.983324@3] meson-mmc: add_emmc_partition
- [ 0.983607@3] meson-mmc: [mmcblk0p01] bootloader offset 0x000000000000, size 0x000000400000
- [ 0.983621@3] meson-mmc: [mmcblk0p02] reserved offset 0x000002400000, size 0x000004000000
- [ 0.983630@3] meson-mmc: [mmcblk0p03] cache offset 0x000006c00000, size 0x000046000000
- [ 0.983792@3] meson-mmc: [mmcblk0p04] env offset 0x00004d400000, size 0x000000800000
- [ 0.983810@3] meson-mmc: [mmcblk0p05] logo offset 0x00004e400000, size 0x000000800000
- [ 0.983822@3] meson-mmc: [mmcblk0p06] recovery offset 0x00004f400000, size 0x000001800000
- [ 0.983833@3] meson-mmc: [mmcblk0p07] misc offset 0x000051400000, size 0x000000800000
- [ 0.983843@3] meson-mmc: [mmcblk0p08] dto offset 0x000052400000, size 0x000000800000
- [ 0.983853@3] meson-mmc: [mmcblk0p09] cri_data offset 0x000053400000, size 0x000000800000
- [ 0.983863@3] meson-mmc: [mmcblk0p10] param offset 0x000054400000, size 0x000001000000
- [ 0.983874@3] meson-mmc: [mmcblk0p11] boot offset 0x000055c00000, size 0x000001000000
- [ 0.983884@3] meson-mmc: [mmcblk0p12] rsv offset 0x000057400000, size 0x000001000000
- [ 0.983894@3] meson-mmc: [mmcblk0p13] tee offset 0x000058c00000, size 0x000002000000
- [ 0.983903@3] meson-mmc: [mmcblk0p14] vendor offset 0x00005b400000, size 0x000010000000
- [ 0.983913@3] meson-mmc: [mmcblk0p15] odm offset 0x00006bc00000, size 0x000010000000
- [ 0.983923@3] meson-mmc: [mmcblk0p16] system offset 0x00007c400000, size 0x000074000000
- [ 0.983933@3] meson-mmc: [mmcblk0p17] data offset 0x0000f0c00000, size 0x000d9ec00000
- [ 0.983962@3] card key: card_blk_probe.
- [ 0.983967@3] emmc_key_init:183 emmc key lba_start:0x12020,lba_end:0x12220
- [ 0.983972@3] emmc key: emmc_key_init:205 ok.
- [ 0.983976@3] meson-mmc: amlmmc_dtb_init: register dtb chardev
- [ 0.988446@3] meson-mmc: calc cf336dcd, store cf336dcd
- [ 0.992906@3] meson-mmc: calc cf336dcd, store cf336dcd
- [ 0.992911@3] meson-mmc: total valid 2
- [ 0.993371@3] meson-mmc: amlmmc_dtb_init: register dtb chardev OK
- [ 0.993426@3] meson-mmc: Exit aml_emmc_partition_ops OK.
- [ 1.030755@0] hdmitx: system: plugin
- [ 1.032799@0] hdmitx: hdmitx: ddc rd8b error 0x50 0x00 0x00
- [ 1.058558@0] meson-mmc: card IN
- [ 1.128447@2] Now can use cma, free:2590, wm:2656
- [ 1.162722@0] hdmitx: edid: EDID Parser:
- [ 1.162752@0] hdmitx: edid: get dtd0 vic: 16
- [ 1.162773@0] hdmitx: edid: dump_dtd_info[1908]
- [ 1.162776@0] hdmitx: edid: pixel_clock: 8475
- [ 1.162778@0] hdmitx: edid: h_active: 1360
- [ 1.162779@0] hdmitx: edid: h_blank: 416
- [ 1.162781@0] hdmitx: edid: v_active: 768
- [ 1.162782@0] hdmitx: edid: v_blank: 30
- [ 1.162784@0] hdmitx: edid: h_sync_offset: 72
- [ 1.162786@0] hdmitx: edid: h_sync: 136
- [ 1.162788@0] hdmitx: edid: v_sync_offset: 3
- [ 1.162789@0] hdmitx: edid: v_sync: 5
- [ 1.162813@0] hdmitx: edid: get dtd1 vic: 19
- [ 1.162816@0] hdmitx: edid: find IEEEOUT
- [ 1.162843@0] hdmitx: edid: check sum valid
- [ 1.162846@0] hdmitx: edid: check sum valid
- [ 1.162853@0] hdmitx: edid: update rx hdr info 0 at edid parsing
- [ 1.162856@0] hdmitx: edid: check sum valid
- [ 1.162857@0] hdmitx: edid: check sum valid
- [ 1.162866@0] hdmitx: edid: blk0 raw data
- [ 1.162891@0] hdmitx: edid:
- [ 1.162891@0] 00ffffffffffff001e6db29c42f302000911010380462778ead9b0a357499c25
- [ 1.162891@0] 11494ba56e00314045406140d1c00101010101010101023a801871382d40582c
- [ 1.162891@0] 4500c48e2100001e1b2150a051001e3048883500bc862100001c000000fc0035
- [ 1.162891@0] 3050433535200a2020202020000000fd00324b1c430f000a20202020202001a6
- [ 1.162891@0]
- [ 1.162891@0]
- [ 1.162894@0] hdmitx: edid: blk1 raw data
- [ 1.162918@0] hdmitx: edid:
- [ 1.162918@0] 020321f14e021101031213041405211f202210230907078301000065030c0010
- [ 1.162918@0] 00011d00bc52d01e20b8285540c48e2100001e011d007251d01e206e285500c4
- [ 1.162918@0] 8e2100001e011d80d0721c1620102c2580c48e2100009e8c0ad090204031200c
- [ 1.162918@0] 405500c48e210000184e1f008051001e3040803700bc882100001800000000cc
- [ 1.162918@0]
- [ 1.162918@0]
- [ 1.162924@0] hdmitx: system: update physcial size: 700 390
- [ 1.162935@0] hdmitx: system: get current mode: 1080p60hz
- [ 1.162938@0] hdmitx: system: update rx hdr info 0
- [ 1.162940@0] hdmitx: system: update physcial size: 700 390
- [ 1.162971@0] hdmitx: system: [set_disp_mode_auto] ALREADY init VIC = 16
- [ 1.162975@0] hdmitx: hw: set audio
- [ 1.162981@0] hdmitx: hw: hdmitx tx_aud_src = 0
- [ 1.162993@0] hdmitx: system: irq 80000001 0
- [ 1.163016@0] hdmitx: fs = 0, cd = 4, tmds_clk = 148352
- [ 1.163020@0] hdmitx: hw: aud_n_para = 5824
- [ 1.163029@0] hdmitx: hw: set channel status
- [ 1.250308@2] clear:e6c00000, free:e6c00000, tick:734095 us
- [ 1.264269@0] meson-mmc: normal card in
- [ 1.266483@0] hdmitx: [0x10000103]: 0x00000008
- [ 1.266486@0] hdmitx: [0x10000104]: 0x00000001
- [ 1.266489@0] hdmitx: [0x10000170]: 0x00000010
- [ 1.266491@0] hdmitx: [0x10000180]: 0x000000ff
- [ 1.266493@0] hdmitx: [0x10000181]: 0x000000ff
- [ 1.266495@0] hdmitx: [0x10000182]: 0x00000003
- [ 1.266496@0] hdmitx: [0x10000183]: 0x00000007
- [ 1.266498@0] hdmitx: [0x10000184]: 0x0000003f
- [ 1.266500@0] hdmitx: [0x10000185]: 0x00000002
- [ 1.266502@0] hdmitx: [0x10000187]: 0x000000ff
- [ 1.266504@0] hdmitx: [0x10000188]: 0x00000003
- [ 1.386524@0] meson-mmc: actual_clock :400000, HHI_nand: 0x80
- [ 1.386526@0] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000033c
- [ 1.418954@3] meson-saradc ff809000.saradc: set delay per tick to <1ms> by default.
- [ 1.418960@3] meson-saradc ff809000.saradc: set ticks per period to <1> by default.
- [ 1.420324@3] dmc_monitor_probe
- [ 1.437210@3] defendkey ff630218.defendkey: Reserved memory is not enough!
- [ 1.438477@3] defendkey: probe of ff630218.defendkey failed with error -22
- [ 1.438965@3] register clk_set_setting cpu[40]
- [ 1.439223@3] Registered firmware driver success.
- [ 1.439999@3] Try to load video/h264_enc.bin ...
- [ 1.440050@3] load firmware size : 76288, Name : video/h264_enc.bin.
- [ 1.440057@3] the fw pack ver v0.0 is too lower.
- [ 1.440058@3] it may work abnormally so need to be update in time.
- [ 1.440637@3] Try to load video/video_ucode.bin ...
- [ 1.441582@3] load firmware size : 1671680, Name : video/video_ucode.bin.
- [ 1.451811@3] ammvdec_mpeg4_driver_init_module
- [ 1.451860@3] amvdec_vc1 module init
- [ 1.451904@3] amvdec_h264 module init
- [ 1.452013@3] ammvdec_h264 module init
- [ 1.452060@3] amvdec_h265 module init
- [ 1.452149@3] amvdec_vp9 module init
- [ 1.452365@3] amvdec_avs module init
- [ 1.452534@3] amvenc_avc_probe -- reserved memory config fail.
- [ 1.452536@3] amvenc_avc - cma memory pool size: 60 MB
- [ 1.452557@3] encode_wq_init.
- [ 1.452561@3] encode start monitor.
- [ 1.452749@3] encode workqueue monitor start.
- [ 1.452870@3] vpu_init
- [ 1.452984@3] vpu_probe
- [ 1.452987@3] HevcEnc reserved memory config fail.
- [ 1.452988@3] HevcEnc - cma memory pool size: 64 MB
- [ 1.453005@3] HevcEnc - wave420l_irq: 40
- [ 1.453048@3] vpu base address get from platform driver physical base addr=0xff610000, virtual base=0xffffff80085a4000
- [ 1.453180@3] success to probe vpu device with video memory from cma
- [ 1.453332@3] Amlogic A/V streaming port init
- [ 1.454384@2] get gate demux control ok ffffffc0cd44fa40
- [ 1.454397@2] get gate parser_top control ok ffffffc0cd44f980
- [ 1.454422@2] get gate vdec control ok ffffffc0cd44f840
- [ 1.454451@2] get gate clk_81 control ok ffffffc0cd44ff40
- [ 1.454517@2] get gate clk_vdec_mux control ok ffffffc0cd44fe80
- [ 1.454556@2] get gate clk_hcodec_mux control ok ffffffc0cd44fd80
- [ 1.454599@2] get gate clk_hevc_mux control ok ffffffc0cd44fc80
- [ 1.454647@2] get gate clk_hevcb_mux control ok ffffffc0cd44fb80
- [ 1.454667@2] get gate ahbarb0 control ok ffffffc0cd44f940
- [ 1.454674@2] get gate asyncfifo control failed (null)
- [ 1.456141@2] aml_codec_T9015 ff632000.t9015: aml_T9015_audio_codec_probe
- [ 1.456239@2] T9015 acodec used by auge, tdmout:1
- [ 1.456988@2] Error: Driver 'spdif-dit' is already registered, aborting...
- [ 1.459178@2] asoc debug: aml_audio_controller_probe-116
- [ 1.460253@2] asoc-aml-card auge_sound: aml_card_probe, parse error -517
- [ 1.465933@2] aml_card_probe error ret:-517
- [ 1.470328@2] aml_tdm_platform_probe, tdm ID = 0, lane_cnt = 4
- [ 1.470343@2] TDM id 0 i2s2hdmi:0
- [ 1.470353@2] snd_tdm ff642000.audiobus:tdma: lane_mask_out = 0, lane_oe_mask_out = 0
- [ 1.470546@2] No channel mask node Channel_Mask
- [ 1.470760@2] aml_tdm_platform_probe, tdm ID = 1, lane_cnt = 4
- [ 1.470814@2] TDM id 1 samesource_sel:3
- [ 1.470816@2] TDM id 1 i2s2hdmi:0
- [ 1.470822@2] snd_tdm ff642000.audiobus:tdmb: lane_mask_out = 1, lane_oe_mask_out = 0
- [ 1.471019@2] No channel mask node Channel_Mask
- [ 1.471160@2] aml_tdm_platform_probe, tdm ID = 2, lane_cnt = 4
- [ 1.471169@2] TDM id 2 i2s2hdmi:0
- [ 1.471175@2] snd_tdm ff642000.audiobus:tdmc: lane_mask_out = 0, lane_oe_mask_out = 1
- [ 1.471313@2] No channel mask node Channel_Mask
- [ 1.471883@2] aml_spdif_platform_probe, spdif ID = 0
- [ 1.472160@2] SPDIF id 0 asrc_id:0 auto_asrc:0
- [ 1.472229@2] spdifout_play_with_zerodata, spdif id:0 enable:0
- [ 1.472233@2] spdif_a fifo ctrl, frddr:0 type:3, 32 bits, chmask 0x3, swap 0x10
- [ 1.472239@2] spdif_info: rate: 48000, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x200, ch1_r:0x200
- [ 1.472245@2] hdmitx: audio: aout notify format CT_PCM
- [ 1.472247@2] hdmitx: hw: set audio
- [ 1.472249@2] hdmitx: hw: hdmitx tx_aud_src = 0
- [ 1.472264@2] hdmitx: fs = 3, cd = 4, tmds_clk = 148352
- [ 1.472266@2] hdmitx: hw: aud_n_para = 5824
- [ 1.472273@2] hdmitx: hw: set channel status
- [ 1.472302@2] hdmitx: audio: Audio Type: PCM
- [ 1.472304@2] hdmitx: audio: set audio param
- [ 1.472307@2] spdif_a is set to enable
- [ 1.472317@2] aml_spdif_platform_probe, register soc platform
- [ 1.472347@2] aml_spdif_platform_probe, spdif ID = 1
- [ 1.472395@2] spdifout_play_with_zerodata, spdif id:1 enable:0
- [ 1.472397@2] spdif_b fifo ctrl, frddr:0 type:3, 32 bits, chmask 0x3, swap 0x10
- [ 1.472401@2] spdif_info: rate: 48000, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x200, ch1_r:0x200
- [ 1.472405@2] spdif_b is set to enable
- [ 1.472415@2] aml_spdif_platform_probe, register soc platform
- [ 1.473079@2] default set lane_mask_in as all lanes.
- [ 1.473082@2] aml_pdm_platform_probe pdm filter mode from dts:1
- [ 1.473092@2] aml_pdm_platform_probe, register soc platform
- [ 1.473388@2] audio_ddr_mngr: 0, irqs toddr 21, frddr 24
- [ 1.473391@2] audio_ddr_mngr: 1, irqs toddr 22, frddr 25
- [ 1.473393@2] audio_ddr_mngr: 2, irqs toddr 23, frddr 26
- [ 1.473615@2] audiolocker_platform_probe
- [ 1.473947@2] resample_platform_probe
- [ 1.474314@2] parse power det src:4, hi_th:0x70000, lo_th:0x16000
- [ 1.474785@2] Register vad
- [ 1.474994@2] Netfilter messages via NETLINK v0.30.
- [ 1.475097@2] Initializing XFRM netlink socket
- [ 1.475113@2] NET: Registered protocol family 17
- [ 1.475142@2] Key type dns_resolver registered
- [ 1.476856@2] Registered swp emulation handler
- [ 1.476867@2] Registered cp15_barrier emulation handler
- [ 1.476874@2] Registered setend emulation handler
- [ 1.477362@2] registered taskstats version 1
- [ 1.495800@0] meson-mmc: actual_clock :50000000, HHI_nand: 0x80
- [ 1.495806@0] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x10000254
- [ 1.496159@0] sd: new high speed SDHC card at address aaaa
- [ 1.496162@0] sd: clock 50000000, 4-bit-bus-width
- [ 1.496162@0]
- [ 1.496591@0] mmcblk1: sd:aaaa SP32G 29.7 GiB
- [ 1.497799@0] mmcblk1: p1 p2
- [ 1.690638@2] aml_dai_spdif_probe
- [ 1.690650@2] aml_dai_spdif_probe
- [ 1.690663@2] set normal 512 fs /4 fs
- [ 1.690692@2] set spdifout clk:6144000, mpll:24576000
- [ 1.690694@2] get spdifout clk:6143997, mpll:24575987
- [ 1.690706@2] aml_dai_set_spdif_fmt , fmt 0x4010
- [ 1.690800@2] aml_spdif_new spdif_b, clk continuous:1
- [ 1.690803@2] spdifout_play_with_zerodata_free, spdif id:1
- [ 1.691130@2] asoc-aml-card auge_sound: dummy <-> SPDIF-B mapping ok
- [ 1.691147@2] set mclk:12288000, mpll:24576000, get mclk:12287994, mpll:24575987
- [ 1.691151@2] aml_dai_set_tdm_slot(), txmask(0x3), rxmask(0x3)
- [ 1.691152@2] lanes_out_cnt(1), lanes_in_cnt(1)
- [ 1.691154@2] lanes_oe_out_cnt(0), lanes_oe_in_cnt(0)
- [ 1.691155@2] lanes_lb_cnt(0)
- [ 1.691156@2] slots(2), slot_width(32)
- [ 1.691168@2] asoc aml_dai_set_tdm_fmt, 0x4011, ffffffc0cdb74418, id(1), clksel(1)
- [ 1.691173@2] master_mode(1), binv(1), finv(1) out_skew(2), in_skew(3)
- [ 1.691501@2] asoc-aml-card auge_sound: T9015-audio-hifi <-> TDM-B mapping ok
- [ 1.691504@2] set normal 512 fs /4 fs
- [ 1.691518@2] set spdifout clk:6144000, mpll:24576000
- [ 1.691520@2] get spdifout clk:6143997, mpll:24575987
- [ 1.691522@2] aml_dai_set_spdif_fmt , fmt 0x4010
- [ 1.691593@2] aml_spdif_new spdif_a, clk continuous:1
- [ 1.691594@2] spdifout_play_with_zerodata_free, spdif id:0
- [ 1.691815@2] asoc-aml-card auge_sound: dummy <-> SPDIF mapping ok
- [ 1.693645@2] snd_card_add_kcontrols card:ffffffc0cd4c6018
- [ 1.693665@2] effect_v2 is not init
- [ 1.693667@2] Not init vad
- [ 1.693668@2] Failed to add VAD controls
- [ 1.693688@2] eq/drc v1 function enable
- [ 1.718558@2] add line-out mute controls
- [ 1.719417@2] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host
- [ 1.722169@2] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
- [ 1.722184@2] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
- [ 1.722195@2] usb: xhci: determined sg_tablesize: 4294967295
- [ 1.722501@2] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228fe6c hci version 0x110 quirks 0x20010010
- [ 1.722542@2] xhci-hcd xhci-hcd.0.auto: irq 14, io mem 0xff500000
- [ 1.722667@2] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 1.722670@2] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.722673@2] usb usb1: Product: xHCI Host Controller
- [ 1.722676@2] usb usb1: Manufacturer: Linux 4.9.182 xhci-hcd
- [ 1.722678@2] usb usb1: SerialNumber: xhci-hcd.0.auto
- [ 1.723257@2] hub 1-0:1.0: USB hub found
- [ 1.723277@2] hub 1-0:1.0: 2 ports detected
- [ 1.723509@2] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
- [ 1.723519@2] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
- [ 1.723528@2] usb: xhci: determined sg_tablesize: 4294967295
- [ 1.723570@2] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
- [ 1.723637@2] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
- [ 1.723641@2] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.723643@2] usb usb2: Product: xHCI Host Controller
- [ 1.723646@2] usb usb2: Manufacturer: Linux 4.9.182 xhci-hcd
- [ 1.723649@2] usb usb2: SerialNumber: xhci-hcd.0.auto
- [ 1.723953@2] hub 2-0:1.0: USB hub found
- [ 1.723970@2] hub 2-0:1.0: 1 port detected
- [ 1.724512@2] aml_vrtc rtc: setting system clock to 2019-08-17 22:53:23 UTC (1566082403)
- [ 1.724799@2] dwc_otg ff400000.dwc2_a: dwc_otg_driver_probe(ffffffc0cd9c0000)
- [ 1.724827@2] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0
- [ 1.724832@2] dwc_otg_driver_probe host only, not probe usb_otg!!!
- [ 1.725765@2] meson_cdev probe
- [ 1.725776@2] thermal: read gpupp failed
- [ 1.725974@2] meson_cdev index: 0
- [ 1.726092@2] thermal: read gpupp failed
- [ 1.728097@2] meson_cdev index: 1
- [ 1.728103@2] cpucore_cooling_register, max_cpu_core_num:4
- [ 1.728197@2] meson_cdev index: 2
- [ 1.728201@2] thermal: read gpupp failed
- [ 1.731920@2] meson_cdev index: 3
- [ 1.731959@2] find tzd id: 0
- [ 1.732085@2] find tzd id: 0
- [ 1.732110@2] meson_cdev probe done
- [ 1.732291@2] gxbb_pm: enter meson_pm_probe!
- [ 1.732319@2] gxbb_pm: meson_pm_probe done
- [ 1.732648@2] ALSA device list:
- [ 1.732651@2] #0: AML-AUGESOUND
- [ 1.734110@2] Freeing unused kernel memory: 4736K
- [ 1.778346@3] fb: malloc_osd_memory, cma:ffffff800ab82730
- [ 1.778356@3] fb: malloc_osd_memory, 1286, base:0x0000000077800000, size:8388608
- [ 1.778385@3] fb: use ion buffer for fb memory, fb_index=0
- [ 1.798770@3] meson-fb meson-fb: create ion_client ffffffc0cd0fc540, handle=ffffffc0cd0f55c0
- [ 1.798779@3] meson-fb meson-fb: ion memory(0): created fb at 0x00000000e8800000, size 75 MiB
- [ 1.798782@3] fb: Frame buffer memory assigned at
- [ 1.798785@3] fb: 0, phy: 0x00000000e8800000, vir:0xffffff800ac74000, size=77312K
- [ 1.798785@3]
- [ 1.798788@3] fb: logo_index=0,fb_index=0
- [ 1.798791@3] fb: ---------------clear fb0 memory ffffff800ac74000
- [ 1.825462@3] fb: osd[0] canvas.idx =0x40
- [ 1.825465@3] fb: osd[0] canvas.addr=0xe8800000
- [ 1.825467@3] fb: osd[0] canvas.width=7680
- [ 1.825468@3] fb: osd[0] canvas.height=2160
- [ 1.825470@3] fb: osd[0] frame.width=1920
- [ 1.825471@3] fb: osd[0] frame.height=1080
- [ 1.825473@3] fb: osd[0] out_addr_id =0x1
- [ 1.827764@3] fb: osd_release now.index=0,open_count=1
- [ 1.829582@0] fb: malloc_osd_memory, cma:ffffff800ab82730
- [ 1.829591@0] fb: malloc_osd_memory, 1286, base:0x0000000077800000, size:8388608
- [ 1.829593@0] fb: use ion buffer for fb memory, fb_index=1
- [ 1.830547@0] meson-fb meson-fb: create ion_client ffffffc0cd0fc540, handle=ffffffc0ab60b940
- [ 1.830552@0] meson-fb meson-fb: ion memory(1): created fb at 0x00000000ed400000, size 1 MiB
- [ 1.830554@0] fb: Frame buffer memory assigned at
- [ 1.830558@0] fb: 1, phy: 0x00000000ed400000, vir:0xffffff8008df5000, size=1024K
- [ 1.830558@0]
- [ 1.830560@0] fb: logo_index=0,fb_index=1
- [ 1.830562@0] fb: ---------------clear fb1 memory ffffff8008df5000
- [ 1.830924@0] fb: osd[1] canvas.idx =0x43
- [ 1.830926@0] fb: osd[1] canvas.addr=0xed400000
- [ 1.830927@0] fb: osd[1] canvas.width=128
- [ 1.830929@0] fb: osd[1] canvas.height=32
- [ 1.830930@0] fb: osd[1] frame.width=32
- [ 1.830932@0] fb: osd[1] frame.height=32
- [ 1.830933@0] fb: osd[1] out_addr_id =0x2
- [ 1.844428@0] fb: osd_release now.index=1,open_count=1
- [ 1.861101@0] vfm_map_store:rm default
- [ 1.861101@0]
- [ 1.861164@0] vfm_map_store:add default decoder ppmgr deinterlace amvideo
- [ 1.861164@0]
- [ 1.861224@0] fb: osd[0] enable: 1 (sh)
- [ 1.877575@0] fb: osd[1] enable: 0 (sh)
- [ 1.905100@3] font: no symbol version for module_layout
- [ 1.910908@3] Console: switching to colour frame buffer device 240x67
- [ 2.847251@2] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities
- [ 2.960451@2] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)
- [ 11.494536@2] vout: aml_tvout_mode_work: monitor_timeout
- [ 11.545891@2] cgroup: cgroup2: unknown option "nsdelegate"
- [ 11.551694@2] systemd[1]: systemd 242 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD +IDN2 -IDN -PCRE2 default-hierarchy=hybrid)
- [ 11.552187@2] systemd[1]: Detected architecture arm64.
- [ 11.556563@2] systemd[1]: Set hostname to <CoreELEC>.
- [ 11.580804@2] systemd[1]: File /usr/lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
- [ 11.580816@2] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
- [ 11.624847@2] systemd[1]: Binding to IPv6 address not available since kernel does not support IPv6.
- [ 11.624889@2] systemd[1]: Binding to IPv6 address not available since kernel does not support IPv6.
- [ 11.654445@2] systemd[1]: Listening on RPCbind Server Activation Socket.
- [ 11.655349@2] systemd[1]: Listening on udev Kernel Socket.
- [ 11.655565@2] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
- [ 11.678727@1] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 115200 to 115200
- [ 11.691087@1] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 115200 to 115200
- [ 11.713618@2] kernel-overlays-setup: setup base modules
- [ 11.816892@2] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/base/lib/modules/4.9.182
- [ 11.850600@0] kernel-overlays-setup: added firmware from /usr/lib/kernel-overlays/base/lib/firmware
- [ 11.850745@0] kernel-overlays-setup: adding overlays from /storage/.cache/kernel-overlays
- [ 11.853181@0] kernel-overlays-setup: done
- [ 11.898217@0] media: Linux media interface: v0.10
- [ 11.911270@0] Linux video capture interface: v2.00
- [ 11.924528@0] amlvid:info: amlvideo_init called
- [ 11.924533@0] amlvid:info: amlvideo_create_instance called
- [ 11.924539@0] amlvid:info: v4l2_dev.name=:amlvideo-000
- [ 11.925065@2] amlvideo-000: V4L2 device registered as video10
- [ 11.941248@2] lirc_helper: wakeupkey 0xbf40fe01, protocol 0x0, mask 0xffffffff
- [ 11.944106@2] wifi_dummy: loading out-of-tree module taints kernel.
- [ 11.944370@2] Triggered SDIO WiFi power on and bus rescan.
- [ 11.944395@2] aml_wifi wifi: [extern_wifi_set_enable] WIFI Disable! 482
- [ 12.058197@0] systemd-journald[2354]: Received request to flush runtime journal from PID 1
- [ 12.178221@2] NET: Registered protocol family 10
- [ 12.262528@3] aml_wifi wifi: [extern_wifi_set_enable] WIFI Enable! 482
- [ 12.583599@0] meson-mmc: sdio: resp_timeout,vstat:0xa1ff2800,virqc:3fff
- [ 12.583607@0] meson-mmc: sdio: err: wait for irq service, bus_fsm:0x8
- [ 12.583678@1] meson-mmc: meson_mmc_irq_thread_v3 600 sdio: cmd:52
- [ 12.584795@0] meson-mmc: sdio: resp_timeout,vstat:0x9dff0800,virqc:3fff
- [ 12.584797@0] meson-mmc: sdio: err: wait for desc write back, bus_fsm:0x7
- [ 12.584805@1] meson-mmc: meson_mmc_irq_thread_v3 600 sdio: cmd:52
- [ 12.589541@0] meson-mmc: sdio: resp_timeout,vstat:0xa1ff2800,virqc:3fff
- [ 12.589548@0] meson-mmc: sdio: err: wait for irq service, bus_fsm:0x8
- [ 12.589570@1] meson-mmc: meson_mmc_irq_thread_v3 600 sdio: cmd:8
- [ 12.592381@3] meson-mmc: actual_clock :0, HHI_nand: 0x80
- [ 12.592387@3] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000033c
- [ 12.614525@3] meson-mmc: actual_clock :400000, HHI_nand: 0x80
- [ 12.614533@3] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000033c
- [ 12.635533@3] sdio: queuing unknown CIS tuple 0x80 (2 bytes)
- [ 12.638883@3] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 12.642077@3] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 12.647928@3] sdio: queuing unknown CIS tuple 0x80 (7 bytes)
- [ 12.762522@3] meson-aml-mmc ffe05000.sd2: divider requested rate 200000000 != actual rate 199999997: ret=0
- [ 12.762531@3] meson-mmc: actual_clock :199999997, HHI_nand: 0x80
- [ 12.762533@3] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x10000245
- [ 12.762538@3] meson-mmc: Data 1 aligned delay is 0
- [ 12.762540@3] meson-mmc: sdio: clk 199999997 tuning start
- [ 12.762570@3] meson-mmc: Tuning transfer error: nmatch=0 tuning_err:0xffffffac
- [ 12.763314@3] meson-mmc: sdio: rx_tuning_result[1] = 40
- [ 12.764033@3] meson-mmc: sdio: rx_tuning_result[2] = 40
- [ 12.764747@3] meson-mmc: sdio: rx_tuning_result[3] = 40
- [ 12.765462@3] meson-mmc: sdio: rx_tuning_result[4] = 40
- [ 12.765466@3] meson-mmc: sdio: best_win_start =1, best_win_size =4
- [ 12.765469@3] meson-mmc: sdio: sd_emmc_regs->gclock=0x10000245,sd_emmc_regs->gadjust=0x32000
- [ 12.769032@3] sdio: new ultra high speed SDR104 SDIO card at address 0001
- [ 12.769041@2] sdio: clock 199999997, 4-bit-bus-width
- [ 12.769041@2]
- [ 12.769472@2] meson-mmc: [sdio_reinit] finish
- [ 13.276688@0] fb: osd_release now.index=0,open_count=1
- [ 13.276746@0] Console: switching to colour dummy device 80x25
- [ 13.630559@0] Registered IR keymap rc-empty
- [ 13.632793@0] input: meson-ir as /devices/platform/ff808040.meson-ir/rc/rc0/input2
- [ 13.634312@2] rc rc0: meson-ir as /devices/platform/ff808040.meson-ir/rc/rc0
- [ 13.653084@3] meson-ir ff808040.meson-ir: AO_RTI_PIN_MUX : 0x100011
- [ 13.653097@3] meson-ir ff808040.meson-ir: receiver initialized
- [ 13.666770@0] lirc_dev: IR Remote Control driver registered, major 495
- [ 13.674635@3] rc rc0: lirc_dev: driver ir-lirc-codec (meson-ir) registered at minor = 0
- [ 13.674646@3] IR LIRC bridge handler initialized
- [ 13.732702@2] decoder registered as /dev/video26
- [ 13.922952@1] set mac for wol = ***************
- [ 13.942246@3] meson6-dwmac ff3f0000.ethernet eth0: fail to init PTP.
- [ 13.948629@3] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 13.985470@2] dhd_module_init: in
- [ 13.985490@2] ======== bcm_wlan_set_plat_data ========
- [ 13.985493@2] host_oob_irq: 52
- [ 13.985495@2] host_oob_irq_flags=0x418
- [ 13.985496@2] dhd_wifi_platform_load: Enter
- [ 13.985526@2] Power-up adapter 'DHD generic adapter'
- [ 13.985530@2] wifi_platform_set_power = 1
- [ 13.985531@2] ======== PULL WL_REG_ON HIGH! ========
- [ 13.985552@2] aml_wifi wifi: [extern_wifi_set_enable] WIFI Disable! 482
- [ 14.068200@1] [0] vcodec_dec decoder
- [ 14.068390@1] [0] release decoder
- [ 14.132055@1] IR NEC protocol handler initialized
- [ 14.222713@2] aml_wifi wifi: [extern_wifi_set_enable] WIFI Enable! 482
- [ 14.730559@1] wifi_platform_bus_enumerate device present 1
- [ 14.730566@1] ======== Card detection to detect SDIO card! ========
- [ 14.730569@1] sdio_reset_comm():
- [ 14.730616@1] meson-aml-mmc ffe05000.sd2: divider requested rate 200000000 != actual rate 199999997: ret=0
- [ 14.730619@1] meson-mmc: actual_clock :199999997, HHI_nand: 0x80
- [ 14.730622@1] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x10000245
- [ 14.735268@0] meson-aml-mmc ffe05000.sd2: divider requested rate 200000000 != actual rate 199999997: ret=0
- [ 14.735276@0] meson-mmc: actual_clock :199999997, HHI_nand: 0x80
- [ 14.735278@0] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x10000245
- [ 14.736337@0] meson-mmc: actual_clock :400000, HHI_nand: 0x80
- [ 14.736340@0] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000023c
- [ 14.739298@1] meson-mmc: actual_clock :0, HHI_nand: 0x80
- [ 14.739304@1] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000023c
- [ 14.758561@1] meson-mmc: actual_clock :400000, HHI_nand: 0x80
- [ 14.758568@1] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000023c
- [ 14.788807@3] sdio: queuing unknown CIS tuple 0x80 (2 bytes)
- [ 14.794880@2] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 14.798274@2] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 14.804444@2] sdio: queuing unknown CIS tuple 0x80 (7 bytes)
- [ 14.825579@2] OpenVFD: Version: V1.3.0
- [ 14.825589@2] OpenVFD: vfd_gpio_clk: #0 = 0x01; #1 = 0x06; #2 = 0x10;
- [ 14.825592@2] OpenVFD: vfd_gpio_dat: #0 = 0x01; #1 = 0x07; #2 = 0x10;
- [ 14.825595@2] OpenVFD: vfd_gpio_stb: #0 = 0x00; #1 = 0x00; #2 = 0xFF;
- [ 14.825598@2] OpenVFD: vfd_gpio0: #0 = 0x00; #1 = 0x00; #2 = 0xFF;
- [ 14.825601@2] OpenVFD: vfd_gpio1: #0 = 0x00; #1 = 0x00; #2 = 0xFF;
- [ 14.825604@2] OpenVFD: vfd_gpio2: #0 = 0x00; #1 = 0x00; #2 = 0xFF;
- [ 14.825607@2] OpenVFD: vfd_gpio3: #0 = 0x00; #1 = 0x00; #2 = 0xFF;
- [ 14.825610@2] OpenVFD: vfd_gpio_protocol: #0 = 0x00; #1 = 0x00;
- [ 14.825613@2] OpenVFD: vfd_chars: #0 = 0x00; #1 = 0x01; #2 = 0x02; #3 = 0x03; #4 = 0x04;
- [ 14.825618@2] OpenVFD: vfd_dot_bits: #0 = 0x00; #1 = 0x01; #2 = 0x02; #3 = 0x03; #4 = 0x04; #5 = 0x05; #6 = 0x06;
- [ 14.825622@2] OpenVFD: vfd_display_type: #0 = 0x01; #1 = 0x00; #2 = 0x00; #3 = 0x06;
- [ 14.825627@2] OpenVFD: Detected gpio chips: periphs-banks, aobus-banks.
- [ 14.825631@2] OpenVFD: "aobus-banks" chip found. base = 496, pin count = 16, pin = 6, offset = 502
- [ 14.825634@2] OpenVFD: "aobus-banks" chip found. base = 496, pin count = 16, pin = 7, offset = 503
- [ 14.825635@2] OpenVFD: Skipping vfd_gpio_stb evaluation (0xFF)
- [ 14.825636@2] OpenVFD: Skipping vfd_gpio0 evaluation (0xFF)
- [ 14.825638@2] OpenVFD: Skipping vfd_gpio1 evaluation (0xFF)
- [ 14.825639@2] OpenVFD: Skipping vfd_gpio2 evaluation (0xFF)
- [ 14.825640@2] OpenVFD: Skipping vfd_gpio3 evaluation (0xFF)
- [ 14.826085@2] OpenVFD: Select FD6551 controller
- [ 14.826153@2] OpenVFD: SW I2C interface intialized (address = 0x0000 (N/A), MSB mode, pull-ups on)
- [ 14.953608@2] meson-aml-mmc ffe05000.sd2: divider requested rate 200000000 != actual rate 199999997: ret=0
- [ 14.953617@2] meson-mmc: actual_clock :199999997, HHI_nand: 0x80
- [ 14.953619@2] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x10000245
- [ 14.953624@2] meson-mmc: Data 1 aligned delay is 0
- [ 14.953627@2] meson-mmc: sdio: clk 199999997 tuning start
- [ 14.953671@2] meson-mmc: Tuning transfer error: nmatch=0 tuning_err:0xffffffac
- [ 14.956124@2] meson-mmc: sdio: rx_tuning_result[1] = 40
- [ 14.957019@2] meson-mmc: sdio: rx_tuning_result[2] = 40
- [ 14.957980@2] meson-mmc: sdio: rx_tuning_result[3] = 40
- [ 14.959787@2] meson-mmc: sdio: rx_tuning_result[4] = 40
- [ 14.959795@2] meson-mmc: sdio: best_win_start =1, best_win_size =4
- [ 14.959798@2] meson-mmc: sdio: sd_emmc_regs->gclock=0x10000245,sd_emmc_regs->gadjust=0x32000
- [ 14.959805@2] meson-mmc: [sdio_reinit] finish
- [ 14.976384@2] bcmsdh_register: register client driver
- [ 14.976603@2] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
- [ 14.976741@2] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
- [ 14.976745@2] bus num (host idx)=2, slot num (rca)=1
- [ 14.976748@2] found adapter info 'DHD generic adapter'
- [ 14.976806@2] sdioh_attach: set sd_f2_blocksize 256
- [ 14.977190@2] dhdsdio_probe : no mutex held. set lock
- [ 14.977314@2] F1 signature read @0x18000000=0x15264345
- [ 14.981987@2] F1 signature OK, socitype:0x1 chip:0x4345 rev:0x6 pkg:0x2
- [ 14.983066@1] DHD: dongle ram size is set to 819200(orig 819200) at 0x198000
- [ 14.983152@1] wifi_platform_get_mac_addr
- [ 14.983155@1] ======== bcm_wlan_get_mac_address ========
- [ 14.983157@1] custom wifi mac is not set
- [ 14.983165@1] dhd_conf_set_chiprev: chip=0x4345, chiprev=6
- [ 14.983196@1] dhd_conf_set_conf_path_by_nv_path: config_path=/usr/lib/firmware/brcm/config.txt
- [ 14.984029@1] dhd_os_open_image: /usr/lib/firmware/brcm/config.txt (181 bytes) open success
- [ 14.990108@1] dhd_conf_read_nv_by_chip: nv_by_chip_count=6
- [ 14.990119@1] dhd_conf_read_nv_by_chip: chip=0xa9a6, chiprev=2, name=nvram_ap6236.txt
- [ 14.990121@1] dhd_conf_read_nv_by_chip: chip=0x4345, chiprev=6, name=nvram_ap6255.txt
- [ 14.990123@1] dhd_conf_read_nv_by_chip: chip=0x4330, chiprev=4, name=nvram_ap6330.txt
- [ 14.990126@1] dhd_conf_read_nv_by_chip: chip=0x4339, chiprev=1, name=nvram_ap6335.txt
- [ 14.990128@1] dhd_conf_read_nv_by_chip: chip=0x4354, chiprev=2, name=nvram_ap6356.txt
- [ 14.990130@1] dhd_conf_read_nv_by_chip: chip=0x4359, chiprev=9, name=nvram_ap6398s.txt
- [ 14.990441@1] dhd_conf_read_config: PM = 0
- [ 14.991278@1] wl_create_event_handler(): thread:wl_event_handler:1029 started
- [ 14.991440@1] tsk Enter, tsk = 0xffffffc0c6e61a90
- [ 14.992097@1] dhd_attach(): thread:dhd_watchdog_thread:102a started
- [ 14.992261@1] dhd_attach(): thread:dhd_dpc:102e started
- [ 14.992347@1] dhd_attach(): thread:dhd_rxf:102f started
- [ 14.992356@1] dhd_deferred_work_init: work queue initialized
- [ 15.009502@1] Dongle Host Driver, version 1.363.59.144.2.git (r)
- [ 15.010073@1] Register interface [wlan0] MAC: ************
- [ 15.010073@1]
- [ 15.010119@1] wl_event_handler: was terminated
- [ 15.010183@1] wl_destroy_event_handler(): thread:wl_event_handler:1029 terminated OK
- [ 15.010189@1] dhd_wl_ioctl: returning as busstate=0
- [ 15.011732@1] dhd_open: WLAN driver is not initialized
- [ 15.011819@1] bcmsdh_oob_intr_unregister: Enter
- [ 15.011821@1] bcmsdh_oob_intr_unregister: irq is not registered
- [ 15.011831@1] dhd_txglom_enable: enable 0
- [ 15.011833@1] dhd_conf_set_txglom_params: swtxglom=0, txglom_ext=0
- [ 15.011835@1] dhd_conf_set_txglom_params: txglom_bucket_size=0
- [ 15.011837@1] dhd_conf_set_txglom_params: txglomsize=0, deferred_tx_len=0, bus_txglom=-1
- [ 15.011838@1] dhd_conf_set_txglom_params: tx_in_rx=1, tx_max_offset=0
- [ 15.011841@1] sdioh_set_mode: set txglom_mode to multi-desc
- [ 15.011844@1] dhd_bus_devreset: WLAN OFF DONE
- [ 15.011982@3] wifi_platform_set_power = 0
- [ 15.011986@3] ======== PULL WL_REG_ON LOW! ========
- [ 15.011989@3] dhdsdio_probe : the lock is released.
- [ 15.012163@3] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
- [ 15.012245@3] dhd_module_init: Exit err=0
- [ 15.153190@1] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 0 to 9600
- [ 15.153242@1] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 9600 to 9600
- [ 15.153264@1] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 9600 to 115200
- [ 15.533944@1] cectx ff80023c.aocec: bad iniator with self:CEC RX len 5: 0f 87 00 e0 91
- [ 16.038552@1] dhd_open: Enter ffffffc0cc724000
- [ 16.038565@1]
- [ 16.038565@1] Dongle Host Driver, version 1.363.59.144.2.git (r)
- [ 16.038568@1] wl_android_wifi_on in 1
- [ 16.038571@1] wl_android_wifi_on in 2: g_wifi_on=0
- [ 16.038574@1] wifi_platform_set_power = 1
- [ 16.038576@1] ======== PULL WL_REG_ON HIGH! ========
- [ 16.038591@1] aml_wifi wifi: [extern_wifi_set_enable] WIFI Disable! 482
- [ 16.238632@1] aml_wifi wifi: [extern_wifi_set_enable] WIFI Enable! 482
- [ 16.746530@1] sdio_reset_comm():
- [ 16.746580@1] meson-aml-mmc ffe05000.sd2: divider requested rate 200000000 != actual rate 199999997: ret=0
- [ 16.746584@1] meson-mmc: actual_clock :199999997, HHI_nand: 0x80
- [ 16.746586@1] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x10000245
- [ 16.748730@0] meson-aml-mmc ffe05000.sd2: divider requested rate 200000000 != actual rate 199999997: ret=0
- [ 16.748735@0] meson-mmc: actual_clock :199999997, HHI_nand: 0x80
- [ 16.748737@0] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x10000245
- [ 16.749782@0] meson-mmc: actual_clock :400000, HHI_nand: 0x80
- [ 16.749784@0] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000023c
- [ 16.752680@0] meson-mmc: actual_clock :0, HHI_nand: 0x80
- [ 16.752687@0] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000023c
- [ 16.774567@0] meson-mmc: actual_clock :400000, HHI_nand: 0x80
- [ 16.774575@0] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x1000023c
- [ 16.795375@0] sdio: queuing unknown CIS tuple 0x80 (2 bytes)
- [ 16.798594@2] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 16.963654@2] meson-aml-mmc ffe05000.sd2: divider requested rate 200000000 != actual rate 199999997: ret=0
- [ 16.963663@2] meson-mmc: actual_clock :199999997, HHI_nand: 0x80
- [ 16.963666@2] meson-mmc: [meson_mmc_clk_set_rate_v3] after clock: 0x10000245
- [ 16.963670@2] meson-mmc: Data 1 aligned delay is 0
- [ 16.963673@2] meson-mmc: sdio: clk 199999997 tuning start
- [ 16.963703@2] meson-mmc: Tuning transfer error: nmatch=0 tuning_err:0xffffffac
- [ 16.964488@2] meson-mmc: sdio: rx_tuning_result[1] = 40
- [ 16.965329@2] meson-mmc: sdio: rx_tuning_result[2] = 40
- [ 16.966143@2] meson-mmc: sdio: rx_tuning_result[3] = 40
- [ 16.967060@1] meson-mmc: sdio: rx_tuning_result[4] = 40
- [ 16.967065@1] meson-mmc: sdio: best_win_start =1, best_win_size =4
- [ 16.967068@1] meson-mmc: sdio: sd_emmc_regs->gclock=0x10000245,sd_emmc_regs->gadjust=0x32000
- [ 16.967130@1] sdioh_start: set sd_f2_blocksize 256
- [ 16.967482@1]
- [ 16.967482@1]
- [ 16.967482@1] dhd_bus_devreset: == WLAN ON ==
- [ 16.967584@1] F1 signature read @0x18000000=0x15264345
- [ 16.970578@2] F1 signature OK, socitype:0x1 chip:0x4345 rev:0x6 pkg:0x2
- [ 16.971187@2] DHD: dongle ram size is set to 819200(orig 819200) at 0x198000
- [ 16.971515@2] dhd_os_open_image: /usr/lib/firmware/brcm/config.txt (181 bytes) open success
- [ 16.971687@2] dhd_conf_read_nv_by_chip: nv_by_chip_count=6
- [ 16.971690@2] dhd_conf_read_nv_by_chip: chip=0xa9a6, chiprev=2, name=nvram_ap6236.txt
- [ 16.971693@2] dhd_conf_read_nv_by_chip: chip=0x4345, chiprev=6, name=nvram_ap6255.txt
- [ 16.971695@2] dhd_conf_read_nv_by_chip: chip=0x4330, chiprev=4, name=nvram_ap6330.txt
- [ 16.971697@2] dhd_conf_read_nv_by_chip: chip=0x4339, chiprev=1, name=nvram_ap6335.txt
- [ 16.971699@2] dhd_conf_read_nv_by_chip: chip=0x4354, chiprev=2, name=nvram_ap6356.txt
- [ 16.971702@2] dhd_conf_read_nv_by_chip: chip=0x4359, chiprev=9, name=nvram_ap6398s.txt
- [ 16.972010@2] dhd_conf_read_config: PM = 0
- [ 16.972079@2] dhd_conf_set_fw_name_by_chip: firmware_path=/usr/lib/firmware/brcm/fw_bcm43455c0_ag.bin
- [ 16.972082@2] dhd_conf_set_nv_name_by_chip: nvram_path=/usr/lib/firmware/brcm/nvram_ap6255.txt
- [ 16.972084@2] dhdsdio_download_firmware: set use_rxchain 0
- [ 16.972086@2] dhdsdio_download_firmware: set txglomsize 36
- [ 16.972087@2] Final fw_path=/usr/lib/firmware/brcm/fw_bcm43455c0_ag.bin
- [ 16.972088@2] Final nv_path=/usr/lib/firmware/brcm/nvram_ap6255.txt
- [ 16.972089@2] Final conf_path=/usr/lib/firmware/brcm/config.txt
- [ 16.972535@2] dhd_os_open_image: /usr/lib/firmware/brcm/fw_bcm43455c0_ag.bin (617600 bytes) open success
- [ 17.046116@2] dhd_os_open_image: /usr/lib/firmware/brcm/nvram_ap6255.txt (1644 bytes) open success
- [ 17.051042@2] NVRAM version: AP6255_NVRAM_V1.0_29052015
- [ 17.051641@2] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
- [ 17.898660@0] dhdsdio_htclk: HT Avail timeout (1000000): clkctl 0x50
- [ 17.898667@0] dhd_bus_init: clock state is wrong. state = 1
- [ 18.022809@3] meson6-dwmac ff3f0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
- [ 18.762585@0] dhdsdio_htclk: HT Avail timeout (1000000): clkctl 0x50
- [ 18.762848@0] dhd_net_bus_devreset: dhd_bus_devreset: -1
- [ 18.762852@0] dhd_wl_ioctl: returning as busstate=0
- [ 18.762855@0] dhd_net_bus_devreset: dhd_bus_devreset: -35
- [ 18.762908@0] wifi_platform_set_power = 0
- [ 18.762910@0] ======== PULL WL_REG_ON LOW! ========
- [ 18.762913@0] wl_android_wifi_on: Failed
- [ 18.762916@0] dhd_open : wl_android_wifi_on failed (-1)
- [ 18.762919@0] dhd_stop: Enter ffffffc0cc724000
- [ 18.762921@0] wl_android_wifi_off in 1
- [ 18.762923@0] wl_android_wifi_off in 2: g_wifi_on=0, on_failure=1
- [ 18.762925@0] dhd_wl_ioctl: returning as busstate=0
- [ 18.762926@0] dhd_net_bus_devreset: dhd_bus_devreset: -35
- [ 18.762975@0] wifi_platform_set_power = 0
- [ 18.762976@0] ======== PULL WL_REG_ON LOW! ========
- [ 18.762977@0] wl_android_wifi_off out
- [ 18.762980@0] dhd_stop: Exit
- [ 18.762985@0] dhd_open: Exit ret=-1
- [ 18.763907@3] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 18.780269@2] 8021q: 802.1Q VLAN Support v1.8
- [ 18.874588@2] the demux clock on, ref cnt: 1
- [ 18.874597@2] the parser_top clock on, ref cnt: 1
- [ 18.874601@2] the vdec clock on, ref cnt: 1
- [ 18.874622@2] the clk_hevc_mux clock on, ref cnt: 1
- [ 18.874626@2] the clk_hevcb_mux clock on, ref cnt: 1
- [ 18.874709@2] hevc mux clock is 499999992 Hz
- [ 18.874735@2] hevc back mux clock is 499999992 Hz
- [ 18.874762@2] the clk_vdec_mux clock on, ref cnt: 1
- [ 18.874786@2] vdec mux clock is 499999992 Hz
- [ 18.874855@2] vdec_create instance ffffff800feb8000, total 1
- [ 18.874865@2] vdec_release instance ffffff800feb8000, total 1
- [ 18.874884@2] the clk_hevc_mux clock off, ref cnt: 0
- [ 18.874887@2] the clk_hevcb_mux clock off, ref cnt: 0
- [ 18.874900@2] the clk_vdec_mux clock off, ref cnt: 0
- [ 18.874904@2] the vdec clock off, ref cnt: 0
- [ 18.874906@2] the parser_top clock off, ref cnt: 0
- [ 18.874909@2] the demux clock off, ref cnt: 0
- [ 19.233018@1] audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:tdmb
- [ 19.234407@1] tdm playback mute: 1, lane_cnt = 4
- [ 19.234542@0] audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:tdmb
- [ 19.235340@1] audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:tdmb
- [ 19.236454@1] tdm playback mute: 1, lane_cnt = 4
- [ 19.236531@1] audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:tdmb
- [ 19.237270@1] audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:tdmb
- [ 19.237602@1] tdm playback mute: 1, lane_cnt = 4
- [ 19.237661@1] audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:tdmb
- [ 19.238313@1] audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:tdmb
- [ 19.238669@1] tdm playback mute: 1, lane_cnt = 4
- [ 19.238728@1] audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:tdmb
- [ 19.239475@1] audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:tdmb
- [ 19.239896@1] tdm playback mute: 1, lane_cnt = 4
- [ 19.239971@1] audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:tdmb
- [ 19.256838@1] audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:tdmb
- [ 19.258430@1] tdm playback mute: 1, lane_cnt = 4
- [ 19.258705@1] audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:tdmb
- [ 19.259415@1] spdif_a keep clk continuous
- [ 19.259420@1] aml_spdif_open
- [ 19.259574@1] audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:spdif
- [ 19.260098@1] spdif_a keep clk continuous
- [ 19.260103@1] aml_spdif_close
- [ 19.260156@1] audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:spdif
- [ 19.260692@1] spdif_b keep clk continuous
- [ 19.260695@1] aml_spdif_open
- [ 19.260813@1] audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:spdif_b
- [ 19.261934@1] spdif_b keep clk continuous
- [ 19.261944@1] aml_spdif_close
- [ 19.262007@1] audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:spdif_b
- [ 19.268770@2] audio_dsp: buf=0
- [ 19.268778@2] audio_dsp: IEC958_mode_raw=0
- [ 19.268807@2] audio_dsp: IEC958_mode_codec= 0, IEC958 type 2 CH PCM
- [ 19.268809@2] audio_dsp: last mode 0,now 0
- [ 19.272935@2] spdif_b keep clk continuous
- [ 19.272942@2] aml_spdif_open
- [ 19.273127@2] audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:spdif_b
- [ 19.273997@2] set normal 512 fs /4 fs
- [ 19.274025@2] set spdifout clk:5644800, mpll:22579200
- [ 19.274028@2] get spdifout clk:5644797, mpll:22579186
- [ 19.274031@2] aml_dai_set_spdif_fmt , fmt 0x4010
- [ 19.274035@2] set normal 512 fs /4 fs
- [ 19.274044@2] set spdifout clk:5644800, mpll:22579200
- [ 19.274045@2] get spdifout clk:5644797, mpll:22579186
- [ 19.274125@2] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0
- [ 19.274133@2] hdmitx: hw: set audio
- [ 19.274135@2] hdmitx: hw: hdmitx tx_aud_src = 0
- [ 19.274149@2] hdmitx: fs = 2, cd = 4, tmds_clk = 148352
- [ 19.274151@2] hdmitx: hw: aud_n_para = 8918
- [ 19.274159@2] hdmitx: hw: set channel status
- [ 19.274189@2] hdmitx: audio: Audio Type: PCM
- [ 19.274191@2] hdmitx: audio: set audio param
- [ 19.274194@2] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
- [ 19.298809@2] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0
- [ 19.298824@2] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
- [ 19.300426@2] spdif_b keep clk continuous
- [ 19.300438@2] aml_spdif_close
- [ 19.300502@2] audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:spdif_b
- [ 19.345099@0] fb: osd_release now.index=0,open_count=1
- [ 19.357078@1] fb: malloc_osd_memory, cma:ffffff800ab82730
- [ 19.357089@1] fb: malloc_osd_memory, 1286, base:0x0000000077800000, size:8388608
- [ 19.357092@1] fb: use ion buffer for fb memory, fb_index=2
- [ 19.358853@1] meson-fb meson-fb: create ion_client ffffffc0cd0fc540, handle=ffffffc0c9247480
- [ 19.358861@1] meson-fb meson-fb: ion memory(2): created fb at 0x00000000ed500000, size 1 MiB
- [ 19.358864@1] fb: Frame buffer memory assigned at
- [ 19.358867@1] fb: 2, phy: 0x00000000ed500000, vir:0xffffff800ff02000, size=1024K
- [ 19.358867@1]
- [ 19.358870@1] fb: logo_index=0,fb_index=2
- [ 19.358872@1] fb: ---------------clear fb2 memory ffffff800ff02000
- [ 19.359377@1] fb: osd[2] canvas.idx =0x41
- [ 19.359378@1] fb: osd[2] canvas.addr=0xed500000
- [ 19.359380@1] fb: osd[2] canvas.width=128
- [ 19.359381@1] fb: osd[2] canvas.height=32
- [ 19.359383@1] fb: osd[2] frame.width=32
- [ 19.359384@1] fb: osd[2] frame.height=32
- [ 19.359386@1] fb: osd[2] out_addr_id =0x3
- [ 19.361918@0] fb: vpu clkc clock is 199 MHZ
- [ 19.361929@0] vpu: switch_vpu_mem_pd: unsupport vpu mod: 53
- [ 19.361935@0] fb: malloc_osd_memory, cma:ffffff800ab82730
- [ 19.361938@0] fb: malloc_osd_memory, 1286, base:0x0000000077800000, size:8388608
- [ 19.361940@0] fb: use ion buffer for fb memory, fb_index=3
- [ 19.367998@2] meson-fb meson-fb: create ion_client ffffffc0cd0fc540, handle=ffffffc0cd78bdc0
- [ 19.368007@2] meson-fb meson-fb: ion memory(3): created fb at 0x00000000ed600000, size 8 MiB
- [ 19.368010@2] fb: Frame buffer memory assigned at
- [ 19.368013@2] fb: 3, phy: 0x00000000ed600000, vir:0xffffff8010003000, size=8192K
- [ 19.368013@2]
- [ 19.368016@2] fb: logo_index=0,fb_index=3
- [ 19.368018@2] fb: ---------------clear fb3 memory ffffff8010003000
- [ 19.371557@2] fb: osd[3] canvas.idx =0x42
- [ 19.371562@2] fb: osd[3] canvas.addr=0xed600000
- [ 19.371564@2] fb: osd[3] canvas.width=128
- [ 19.371566@2] fb: osd[3] canvas.height=32
- [ 19.371567@2] fb: osd[3] frame.width=32
- [ 19.371569@2] fb: osd[3] frame.height=32
- [ 19.371570@2] fb: osd[3] out_addr_id =0x4
- [ 19.382122@2] vout: vmode set to null
- [ 19.382213@2] fb: current vmode=1080p60hz, cmd: 0x10000
- [ 19.382217@2] vlock: event MODE_CHANGE_PRE 0
- [ 19.382268@2] vout: new mode null set ok
- [ 19.382271@2] fb: current vmode=null, cmd: 0x20000
- [ 19.382368@2] hdmitx: system: set frac_rate_policy as 1
- [ 19.382389@2] vout: vmode set to 1080p60hz
- [ 19.382421@2] fb: current vmode=null, cmd: 0x10000
- [ 19.382426@2] hdmitx: hdmitx_set_current_vmode[3655]
- [ 19.382428@2] hdmitx: system: recalc before 1080p60hz 2997 50
- [ 19.382431@2] hdmitx: system: recalc after 1080p60hz 2997 50
- [ 19.382437@2] hdmitx: system: get current mode: 1080p60hz
- [ 19.382440@2] hdmitx: system: update rx hdr info 0
- [ 19.382442@2] hdmitx: system: update physcial size: 700 390
- [ 19.382514@2] hdmitx: video: already init VIC = 0 Now VIC = 16
- [ 19.382519@2] hdmitx: hw: div40: 0
- [ 19.412533@2] hdmitx: ddc w1b error 0x54 0x20 0x00
- [ 19.412546@2] hdmitx: frac_rate = 1
- [ 19.412550@2] hdmitx: hdmitx: set clk: VIC = 16 cd = 4 cs = 2 frac_rate = 1
- [ 19.412556@2] hdmitx: config HPLL = 5940000 frac_rate = 1
- [ 19.412611@2] hdmitx: HPLLv1: 0xdb3a04f7
- [ 19.412612@2] hdmitx: config HPLL done
- [ 19.412621@2] hdmitx: set_hpll_od3_clk_div[610] div = 6
- [ 19.412626@2] hdmitx: j = 4 vid_clk_div = 1
- [ 19.412632@2] hdmitx: set enc for VIC: 16
- [ 19.415649@2] hdmitx: hw: config hdmitx IP vic = 16 cd:4 cs: 2
- [ 19.546537@2] hdmitx: video: Sink is HDMI device
- [ 19.546567@2] hdmitx: hw: set audio
- [ 19.546575@2] hdmitx: hw: hdmitx tx_aud_src = 0
- [ 19.546588@2] hdmitx: fs = 2, cd = 4, tmds_clk = 148352
- [ 19.546590@2] hdmitx: hw: aud_n_para = 8918
- [ 19.546597@2] hdmitx: hw: set channel status
- [ 19.546626@2] hdmitx: audio: Audio Type: PCM
- [ 19.546632@2] vout: new mode 1080p60hz set ok
- [ 19.546639@2] fb: current vmode=1080p60hz, cmd: 0x20000
- [ 19.546648@2] fb: osd_update_disp_axis_hw:pan_data(0,0,1919,1079)
- [ 19.546650@2] fb: osd_update_disp_axis_hw:dispdata(0,0,1919,1079)
- [ 19.559374@0] fb: osd_update_disp_axis_hw:pan_data(0,0,31,31)
- [ 19.559376@0] fb: osd_update_disp_axis_hw:dispdata(0,0,31,31)
- [ 19.576083@0] fb: osd_update_disp_axis_hw:pan_data(0,0,31,31)
- [ 19.576086@0] fb: osd_update_disp_axis_hw:dispdata(0,0,31,31)
- [ 19.592715@0] vlock: event MODE_CHANGE
- [ 19.610459@3] audio_dsp: buf=0
- [ 19.610500@3] audio_dsp: IEC958_mode_raw=0
- [ 19.610540@3] audio_dsp: IEC958_mode_codec= 0, IEC958 type 2 CH PCM
- [ 19.610542@3] audio_dsp: last mode 0,now 0
- [ 19.614782@3] spdif_b keep clk continuous
- [ 19.614788@3] aml_spdif_open
- [ 19.614982@2] audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:spdif_b
- [ 19.618016@2] set normal 512 fs /4 fs
- [ 19.618055@2] set spdifout clk:5644800, mpll:22579200
- [ 19.618058@2] get spdifout clk:5644797, mpll:22579186
- [ 19.618061@2] aml_dai_set_spdif_fmt , fmt 0x4010
- [ 19.618066@2] set normal 512 fs /4 fs
- [ 19.618073@2] set spdifout clk:5644800, mpll:22579200
- [ 19.618075@2] get spdifout clk:5644797, mpll:22579186
- [ 19.618144@2] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0
- [ 19.618154@2] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
- [ 19.618347@2] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0
- [ 19.618353@2] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
- [ 19.619707@3] spdif_b keep clk continuous
- [ 19.619719@3] aml_spdif_close
- [ 19.619822@3] audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:spdif_b
- [ 20.075834@2] vout: vmode set to null
- [ 20.075920@2] fb: current vmode=1080p60hz, cmd: 0x10000
- [ 20.075924@2] vlock: event MODE_CHANGE_PRE 0
- [ 20.075977@2] vout: new mode null set ok
- [ 20.075979@2] fb: current vmode=null, cmd: 0x20000
- [ 20.076074@2] hdmitx: system: set frac_rate_policy as 1
- [ 20.076094@2] vout: vmode set to 1080p60hz
- [ 20.076123@2] fb: current vmode=null, cmd: 0x10000
- [ 20.076129@2] hdmitx: hdmitx_set_current_vmode[3655]
- [ 20.076131@2] hdmitx: system: recalc before 1080p60hz 2997 50
- [ 20.076134@2] hdmitx: system: recalc after 1080p60hz 2997 50
- [ 20.076141@2] hdmitx: hdmitx: display colourdepth was 8 in cur_param 0xffffff800aa23b20 (VIC: 16)
- [ 20.076142@2] hdmitx: system: get current mode: 1080p60hz
- [ 20.076145@2] hdmitx: system: update rx hdr info 0
- [ 20.076147@2] hdmitx: system: update physcial size: 700 390
- [ 20.076156@2] hdmitx: hdmitx: display colourdepth is 10 in cur_param 0xffffff800aa23b20 (VIC: 16)
- [ 20.076159@2] hdmitx: Bitdepth is set to 10 bits but display does not support deep colour
- [ 20.076186@2] hdmitx: video: already init VIC = 0 Now VIC = 16
- [ 20.076190@2] hdmitx: hw: div40: 0
- [ 20.102746@0] hdmitx: system: irq 80000001 0
- [ 20.104532@2] hdmitx: ddc w1b error 0x54 0x20 0x00
- [ 20.104545@2] hdmitx: frac_rate = 1
- [ 20.104549@2] hdmitx: hdmitx: set clk: VIC = 16 cd = 4 cs = 2 frac_rate = 1
- [ 20.104555@2] hdmitx: config HPLL = 5940000 frac_rate = 1
- [ 20.104610@2] hdmitx: HPLLv1: 0xdb3a04f7
- [ 20.104612@2] hdmitx: config HPLL done
- [ 20.104620@2] hdmitx: set_hpll_od3_clk_div[610] div = 6
- [ 20.104625@2] hdmitx: j = 4 vid_clk_div = 1
- [ 20.104631@2] hdmitx: set enc for VIC: 16
- [ 20.104646@0] hdmitx: system: irq 80000001 0
- [ 20.107649@2] hdmitx: hw: config hdmitx IP vic = 16 cd:4 cs: 2
- [ 20.206533@2] hdmitx: [0x10000104]: 0x00000001
- [ 20.206543@2] hdmitx: [0x10000180]: 0x000000ff
- [ 20.206545@2] hdmitx: [0x10000181]: 0x000000ff
- [ 20.206547@2] hdmitx: [0x10000182]: 0x00000003
- [ 20.206549@2] hdmitx: [0x10000183]: 0x00000007
- [ 20.206551@2] hdmitx: [0x10000184]: 0x0000003f
- [ 20.206553@2] hdmitx: [0x10000185]: 0x00000002
- [ 20.206555@2] hdmitx: [0x10000187]: 0x000000ff
- [ 20.206557@2] hdmitx: [0x10000188]: 0x00000003
- [ 20.238649@0] hdmitx: video: Sink is HDMI device
- [ 20.238676@0] hdmitx: hw: set audio
- [ 20.238685@0] hdmitx: hw: hdmitx tx_aud_src = 0
- [ 20.238699@0] hdmitx: fs = 2, cd = 4, tmds_clk = 148352
- [ 20.238701@0] hdmitx: hw: aud_n_para = 8918
- [ 20.238709@0] hdmitx: hw: set channel status
- [ 20.238739@0] hdmitx: audio: Audio Type: PCM
- [ 20.238744@0] vout: new mode 1080p60hz set ok
- [ 20.238751@0] fb: current vmode=1080p60hz, cmd: 0x20000
- [ 20.238760@0] fb: osd_update_disp_axis_hw:pan_data(0,0,1919,1079)
- [ 20.238762@0] fb: osd_update_disp_axis_hw:dispdata(0,0,1919,1079)
- [ 20.251377@0] fb: osd_update_disp_axis_hw:pan_data(0,0,31,31)
- [ 20.251379@0] fb: osd_update_disp_axis_hw:dispdata(0,0,31,31)
- [ 20.268063@0] fb: osd_update_disp_axis_hw:pan_data(0,0,31,31)
- [ 20.268065@0] fb: osd_update_disp_axis_hw:dispdata(0,0,31,31)
- [ 20.284737@0] vlock: event MODE_CHANGE
- [ 20.302641@2] audio_dsp: buf=0
- [ 20.302650@2] audio_dsp: IEC958_mode_raw=0
- [ 20.302686@2] audio_dsp: IEC958_mode_codec= 0, IEC958 type 2 CH PCM
- [ 20.302689@2] audio_dsp: last mode 0,now 0
- [ 20.306569@2] spdif_b keep clk continuous
- [ 20.306575@2] aml_spdif_open
- [ 20.307366@2] audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:spdif_b
- [ 20.308218@2] set normal 512 fs /4 fs
- [ 20.308251@2] set spdifout clk:5644800, mpll:22579200
- [ 20.308254@2] get spdifout clk:5644797, mpll:22579186
- [ 20.308257@2] aml_dai_set_spdif_fmt , fmt 0x4010
- [ 20.308261@2] set normal 512 fs /4 fs
- [ 20.308268@2] set spdifout clk:5644800, mpll:22579200
- [ 20.308270@2] get spdifout clk:5644797, mpll:22579186
- [ 20.308328@2] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0
- [ 20.308338@2] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
- [ 20.308512@2] spdif_info: rate: 44100, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x0, ch1_r:0x0
- [ 20.308517@2] aml_spdif_fifo_ctrl, bit depth:16, frddr type:1, toddr:type:1
- [ 20.309663@1] spdif_b keep clk continuous
- [ 20.309675@1] aml_spdif_close
- [ 20.309783@1] audio_ddr_mngr: frddrs[0] released by device ff642000.audiobus:spdif_b
- [ 22.843437@1] cectx ff80023c.aocec: bad iniator with self:CEC RX len 5: 0f 87 00 e0 91
- [ 22.916130@1] cectx ff80023c.aocec: bad iniator with self:CEC RX len 2: 0f 8c
- [ 23.664669@1] cectx ff80023c.aocec: bad iniator with self:CEC RX len 5: 0f 87 00 e0 91
- [ 23.737661@1] cectx ff80023c.aocec: bad iniator with self:CEC RX len 2: 0f 8c
- [ 29.581187@1] OpenVFD: Select FD6551 controller
- [ 62.470517@0] fb: mem_free_work, free memory: addr:800000
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement