Guest User

Untitled

a guest
Oct 10th, 2021
220
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 32.46 KB | None | 0 0
  1. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
  2. [ 0.000000] Linux version 5.10.63-18-raspberrypi4-ARCH (builduser@leming) (aarch64-unknown-linux-gnu-gcc (GCC) 10.2.0, GNU ld (GNU Binutils) 2.35) #1 SMP PREEMPT Sat Oct 9 03:45:19 MDT 2021
  3. [ 0.000000] random: fast init done
  4. [ 0.000000] Machine model: Raspberry Pi 4 Model B Rev 1.1
  5. [ 0.000000] Reserved memory: created CMA memory pool at 0x000000000e800000, size 512 MiB
  6. [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
  7. [ 0.000000] Zone ranges:
  8. [ 0.000000] DMA [mem 0x0000000000000000-0x000000003fffffff]
  9. [ 0.000000] DMA32 [mem 0x0000000040000000-0x00000000fbffffff]
  10. [ 0.000000] Normal empty
  11. [ 0.000000] Movable zone start for each node
  12. [ 0.000000] Early memory node ranges
  13. [ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff]
  14. [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000fbffffff]
  15. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000fbffffff]
  16. [ 0.000000] On node 0 totalpages: 1012736
  17. [ 0.000000] DMA zone: 3792 pages used for memmap
  18. [ 0.000000] DMA zone: 0 pages reserved
  19. [ 0.000000] DMA zone: 242688 pages, LIFO batch:63
  20. [ 0.000000] DMA32 zone: 12032 pages used for memmap
  21. [ 0.000000] DMA32 zone: 770048 pages, LIFO batch:63
  22. [ 0.000000] percpu: Embedded 32 pages/cpu s91096 r8192 d31784 u131072
  23. [ 0.000000] pcpu-alloc: s91096 r8192 d31784 u131072 alloc=32*4096
  24. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  25. [ 0.000000] Detected PIPT I-cache on CPU0
  26. [ 0.000000] CPU features: detected: Spectre-v2
  27. [ 0.000000] CPU features: detected: Spectre-v4
  28. [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
  29. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 996912
  30. [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=DC:A6:32:48:2E:0B vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 root=/dev/mmcblk0p2 rw rootwait console=ttyAMA0,115200 console=tty1 selinux=0 plymouth.enable=0 smsc95xx.turbo_mode=N dwc_otg.lpm_enable=0 kgdboc=ttyAMA0,115200 audit=0
  31. [ 0.000000] audit: disabled (until reboot)
  32. [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
  33. [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
  34. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  35. [ 0.000000] software IO TLB: mapped [mem 0x0000000037400000-0x000000003b400000] (64MB)
  36. [ 0.000000] Memory: 3350628K/4050944K available (12542K kernel code, 1902K rwdata, 4280K rodata, 2560K init, 1224K bss, 176028K reserved, 524288K cma-reserved)
  37. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  38. [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  39. [ 0.000000] Trampoline variant of Tasks RCU enabled.
  40. [ 0.000000] Tracing variant of Tasks RCU enabled.
  41. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  42. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  43. [ 0.000000] GIC: Using split EOI/Deactivate mode
  44. [ 0.000000] random: get_random_bytes called from start_kernel+0x3c8/0x588 with crng_init=1
  45. [ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
  46. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
  47. [ 0.000006] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
  48. [ 0.000241] Console: colour dummy device 80x25
  49. [ 0.000632] printk: console [tty1] enabled
  50. [ 0.000685] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
  51. [ 0.000718] pid_max: default: 32768 minimum: 301
  52. [ 0.001037] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
  53. [ 0.001111] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
  54. [ 0.002179] cgroup: Disabling memory control group subsystem
  55. [ 0.003851] rcu: Hierarchical SRCU implementation.
  56. [ 0.005168] smp: Bringing up secondary CPUs ...
  57. [ 0.005899] Detected PIPT I-cache on CPU1
  58. [ 0.005973] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
  59. [ 0.006800] Detected PIPT I-cache on CPU2
  60. [ 0.006846] CPU2: Booted secondary processor 0x0000000002 [0x410fd083]
  61. [ 0.007633] Detected PIPT I-cache on CPU3
  62. [ 0.007679] CPU3: Booted secondary processor 0x0000000003 [0x410fd083]
  63. [ 0.007800] smp: Brought up 1 node, 4 CPUs
  64. [ 0.007873] SMP: Total of 4 processors activated.
  65. [ 0.007890] CPU features: detected: 32-bit EL0 Support
  66. [ 0.007907] CPU features: detected: CRC32 instructions
  67. [ 0.007989] CPU features: detected: 32-bit EL1 Support
  68. [ 0.034413] CPU: All CPU(s) started at EL2
  69. [ 0.034489] alternatives: patching kernel code
  70. [ 0.036356] devtmpfs: initialized
  71. [ 0.045886] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  72. [ 0.045944] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
  73. [ 0.059529] pinctrl core: initialized pinctrl subsystem
  74. [ 0.060628] NET: Registered protocol family 16
  75. [ 0.062807] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
  76. [ 0.063064] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
  77. [ 0.063674] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
  78. [ 0.064251] thermal_sys: Registered thermal governor 'step_wise'
  79. [ 0.064701] cpuidle: using governor menu
  80. [ 0.065131] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  81. [ 0.065273] ASID allocator initialised with 65536 entries
  82. [ 0.065398] Serial: AMBA PL011 UART driver
  83. [ 0.082542] bcm2835-mbox fe00b880.mailbox: mailbox enabled
  84. [ 0.088328] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-09-30T19:21:03, variant start
  85. [ 0.092347] raspberrypi-firmware soc:firmware: Firmware hash is 51215b4f6e3966401ecd99652a35cf1c25069113
  86. [ 0.118136] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
  87. [ 0.118174] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
  88. [ 0.118195] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  89. [ 0.118213] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
  90. [ 0.121710] cryptd: max_cpu_qlen set to 1000
  91. [ 0.192568] raid6: neonx8 gen() 1706 MB/s
  92. [ 0.260678] raid6: neonx8 xor() 1283 MB/s
  93. [ 0.328781] raid6: neonx4 gen() 1778 MB/s
  94. [ 0.396892] raid6: neonx4 xor() 1355 MB/s
  95. [ 0.465014] raid6: neonx2 gen() 1555 MB/s
  96. [ 0.533113] raid6: neonx2 xor() 1204 MB/s
  97. [ 0.601238] raid6: neonx1 gen() 1167 MB/s
  98. [ 0.669345] raid6: neonx1 xor() 937 MB/s
  99. [ 0.737457] raid6: int64x8 gen() 1006 MB/s
  100. [ 0.805550] raid6: int64x8 xor() 570 MB/s
  101. [ 0.873712] raid6: int64x4 gen() 1015 MB/s
  102. [ 0.941811] raid6: int64x4 xor() 574 MB/s
  103. [ 1.009866] raid6: int64x2 gen() 949 MB/s
  104. [ 1.077979] raid6: int64x2 xor() 523 MB/s
  105. [ 1.146079] raid6: int64x1 gen() 731 MB/s
  106. [ 1.214169] raid6: int64x1 xor() 383 MB/s
  107. [ 1.214185] raid6: using algorithm neonx4 gen() 1778 MB/s
  108. [ 1.214200] raid6: .... xor() 1355 MB/s, rmw enabled
  109. [ 1.214218] raid6: using neon recovery algorithm
  110. [ 1.214748] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1
  111. [ 1.217000] iommu: Default domain type: Translated
  112. [ 1.217230] vgaarb: loaded
  113. [ 1.217709] SCSI subsystem initialized
  114. [ 1.217909] usbcore: registered new interface driver usbfs
  115. [ 1.217965] usbcore: registered new interface driver hub
  116. [ 1.218021] usbcore: registered new device driver usb
  117. [ 1.219829] clocksource: Switched to clocksource arch_sys_counter
  118. [ 2.231544] VFS: Disk quotas dquot_6.6.0
  119. [ 2.231654] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  120. [ 2.231865] FS-Cache: Loaded
  121. [ 2.232232] CacheFiles: Loaded
  122. [ 2.233097] simple-framebuffer 3e402000.framebuffer: framebuffer at 0x3e402000, 0x7f8000 bytes, mapped to 0x(____ptrval____)
  123. [ 2.233127] simple-framebuffer 3e402000.framebuffer: format=a8r8g8b8, mode=1920x1080x32, linelength=7680
  124. [ 2.245042] Console: switching to colour frame buffer device 240x67
  125. [ 2.255903] simple-framebuffer 3e402000.framebuffer: fb0: simplefb registered!
  126. [ 2.263394] NET: Registered protocol family 2
  127. [ 2.264012] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
  128. [ 2.267160] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
  129. [ 2.267382] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
  130. [ 2.267679] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
  131. [ 2.268363] TCP: Hash tables configured (established 32768 bind 32768)
  132. [ 2.268666] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
  133. [ 2.268810] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
  134. [ 2.269154] NET: Registered protocol family 1
  135. [ 2.269918] RPC: Registered named UNIX socket transport module.
  136. [ 2.269994] RPC: Registered udp transport module.
  137. [ 2.270049] RPC: Registered tcp transport module.
  138. [ 2.270105] RPC: Registered tcp NFSv4.1 backchannel transport module.
  139. [ 2.270180] NET: Registered protocol family 44
  140. [ 2.270244] PCI: CLS 0 bytes, default 64
  141. [ 2.270500] Trying to unpack rootfs image as initramfs...
  142. [ 2.734819] Freeing initrd memory: 7092K
  143. [ 2.736577] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
  144. [ 2.736874] kvm [1]: IPA Size Limit: 44 bits
  145. [ 2.737975] kvm [1]: vgic interrupt IRQ9
  146. [ 2.738248] kvm [1]: Hyp mode initialized successfully
  147. [ 2.739646] Initialise system trusted keyrings
  148. [ 2.740023] workingset: timestamp_bits=46 max_order=20 bucket_order=0
  149. [ 2.745813] zbud: loaded
  150. [ 2.747387] FS-Cache: Netfs 'nfs' registered for caching
  151. [ 2.748101] NFS: Registering the id_resolver key type
  152. [ 2.748193] Key type id_resolver registered
  153. [ 2.748247] Key type id_legacy registered
  154. [ 2.748396] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  155. [ 2.748483] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
  156. [ 2.813193] xor: measuring software checksum speed
  157. [ 2.817223] 8regs : 2522 MB/sec
  158. [ 2.820687] 32regs : 2903 MB/sec
  159. [ 2.824873] arm64_neon : 2408 MB/sec
  160. [ 2.824929] xor: using function: 32regs (2903 MB/sec)
  161. [ 2.824995] async_tx: api initialized (async)
  162. [ 2.827569] Key type asymmetric registered
  163. [ 2.830131] Asymmetric key parser 'x509' registered
  164. [ 2.832762] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
  165. [ 2.835566] io scheduler mq-deadline registered
  166. [ 2.838245] io scheduler kyber registered
  167. [ 2.841021] io scheduler bfq registered
  168. [ 2.846450] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
  169. [ 2.849212] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
  170. [ 2.851931] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x063fffffff -> 0x00c0000000
  171. [ 2.854645] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00bfffffff -> 0x0400000000
  172. [ 2.905909] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
  173. [ 2.908794] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
  174. [ 2.911456] pci_bus 0000:00: root bus resource [bus 00-ff]
  175. [ 2.914164] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff])
  176. [ 2.916964] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
  177. [ 2.919825] pci 0000:00:00.0: PME# supported from D0 D3hot
  178. [ 2.925875] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  179. [ 2.928828] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
  180. [ 2.931590] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
  181. [ 2.934467] pci 0000:01:00.0: PME# supported from D0 D3cold
  182. [ 2.940388] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
  183. [ 2.943148] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
  184. [ 2.945900] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
  185. [ 2.948614] pci 0000:00:00.0: PCI bridge to [bus 01]
  186. [ 2.951260] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff]
  187. [ 2.954152] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
  188. [ 2.956971] pcieport 0000:00:00.0: PME: Signaling with IRQ 48
  189. [ 2.960004] pcieport 0000:00:00.0: AER: enabled with IRQ 48
  190. [ 2.965950] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
  191. [ 2.969998] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
  192. [ 2.973295] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
  193. [ 2.976229] cacheinfo: Unable to detect cache hierarchy for CPU 0
  194. [ 2.988464] brd: module loaded
  195. [ 3.123955] loop: module loaded
  196. [ 3.127885] Loading iSCSI transport class v2.0-870.
  197. [ 3.132978] libphy: Fixed MDIO Bus: probed
  198. [ 3.136287] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
  199. [ 3.147848] libphy: bcmgenet MII bus: probed
  200. [ 3.203924] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
  201. [ 3.207500] usbcore: registered new interface driver r8152
  202. [ 3.210209] usbcore: registered new interface driver lan78xx
  203. [ 3.212860] usbcore: registered new interface driver smsc95xx
  204. [ 3.216783] xhci_hcd 0000:01:00.0: enabling device (0000 -> 0002)
  205. [ 3.219415] xhci_hcd 0000:01:00.0: xHCI Host Controller
  206. [ 3.222007] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
  207. [ 3.225225] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000060000000890
  208. [ 3.228552] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
  209. [ 3.231183] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  210. [ 3.233784] usb usb1: Product: xHCI Host Controller
  211. [ 3.236391] usb usb1: Manufacturer: Linux 5.10.63-18-raspberrypi4-ARCH xhci-hcd
  212. [ 3.239008] usb usb1: SerialNumber: 0000:01:00.0
  213. [ 3.242171] hub 1-0:1.0: USB hub found
  214. [ 3.244839] hub 1-0:1.0: 1 port detected
  215. [ 3.247856] xhci_hcd 0000:01:00.0: xHCI Host Controller
  216. [ 3.250431] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
  217. [ 3.253082] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
  218. [ 3.255908] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
  219. [ 3.258531] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  220. [ 3.261179] usb usb2: Product: xHCI Host Controller
  221. [ 3.263829] usb usb2: Manufacturer: Linux 5.10.63-18-raspberrypi4-ARCH xhci-hcd
  222. [ 3.266504] usb usb2: SerialNumber: 0000:01:00.0
  223. [ 3.269734] hub 2-0:1.0: USB hub found
  224. [ 3.272460] hub 2-0:1.0: 4 ports detected
  225. [ 3.276150] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
  226. [ 3.278912] dwc_otg: FIQ enabled
  227. [ 3.278920] dwc_otg: NAK holdoff enabled
  228. [ 3.278926] dwc_otg: FIQ split-transaction FSM enabled
  229. [ 3.278936] Module dwc_common_port init
  230. [ 3.279379] usbcore: registered new interface driver uas
  231. [ 3.282104] usbcore: registered new interface driver usb-storage
  232. [ 3.285098] mousedev: PS/2 mouse device common for all mice
  233. [ 3.288933] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
  234. [ 3.292037] device-mapper: uevent: version 1.0.3
  235. [ 3.294920] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: [email protected]
  236. [ 3.298301] device-mapper: multipath round-robin: version 1.2.0 loaded
  237. [ 3.300999] device-mapper: multipath queue-length: version 0.2.0 loaded
  238. [ 3.303666] device-mapper: multipath service-time: version 0.3.0 loaded
  239. [ 3.306338] device-mapper: raid: Loading target version 1.15.1
  240. [ 3.311267] sdhci: Secure Digital Host Controller Interface driver
  241. [ 3.313960] sdhci: Copyright(c) Pierre Ossman
  242. [ 3.315686] Error: Driver 'sdhost-bcm2835' is already registered, aborting...
  243. [ 3.316887] sdhci-pltfm: SDHCI platform and OF driver helper
  244. [ 3.319724] ledtrig-cpu: registered to indicate activity on CPUs
  245. [ 3.321060] hid: raw HID events driver (C) Jiri Kosina
  246. [ 3.322384] usbcore: registered new interface driver usbhid
  247. [ 3.323586] usbhid: USB HID core driver
  248. [ 3.327709] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
  249. [ 3.329120] [vc_sm_connected_init]: start
  250. [ 3.333908] [vc_sm_connected_init]: installed successfully
  251. [ 3.335363] Initializing XFRM netlink socket
  252. [ 3.336777] NET: Registered protocol family 17
  253. [ 3.338265] Key type dns_resolver registered
  254. [ 3.339977] registered taskstats version 1
  255. [ 3.341359] Loading compiled-in X.509 certificates
  256. [ 3.342922] Key type ._fscrypt registered
  257. [ 3.344317] Key type .fscrypt registered
  258. [ 3.345655] Key type fscrypt-provisioning registered
  259. [ 3.347403] Btrfs loaded, crc32c=crc32c-generic
  260. [ 3.354610] Key type encrypted registered
  261. [ 3.360784] uart-pl011 fe201000.serial: there is not valid maps for state default
  262. [ 3.362320] uart-pl011 fe201000.serial: cts_event_workaround enabled
  263. [ 3.363794] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 21, base_baud = 0) is a PL011 rev2
  264. [ 4.843205] printk: console [ttyAMA0] enabled
  265. [ 4.857030] KGDB: Registered I/O driver kgdboc
  266. [ 4.865566] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
  267. [ 4.875394] of_cfs_init
  268. [ 4.879243] of_cfs_init: OK
  269. [ 4.920560] mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA
  270. [ 4.934174] Freeing unused kernel memory: 2560K
  271. [ 4.940021] Run /init as init process
  272. [ 4.944883] with arguments:
  273. [ 4.944886] /init
  274. [ 4.944889] with environment:
  275. [ 4.944891] HOME=/
  276. [ 4.944893] TERM=linux
  277. [ 4.944896] selinux=0
  278. [ 4.944899] kgdboc=ttyAMA0,115200
  279. [ 4.975896] usb 1-1: new high-speed USB device number 2 using xhci_hcd
  280. [ 5.027045] mmc0: new ultra high speed DDR50 SDHC card at address 0001
  281. [ 5.035623] mmcblk0: mmc0:0001 EB1QT 29.8 GiB
  282. [ 5.048510] mmcblk0: p1 p2
  283. [ 5.134446] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.20
  284. [ 5.147879] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  285. [ 5.164077] usb 1-1: Product: USB2.0 Hub
  286. [ 5.173823] hub 1-1:1.0: USB hub found
  287. [ 5.179706] hub 1-1:1.0: 4 ports detected
  288. [ 5.408424] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  289. [ 5.483877] usb 1-1.1: new full-speed USB device number 3 using xhci_hcd
  290. [ 5.602397] usb 1-1.1: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.01
  291. [ 5.613137] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  292. [ 5.621932] usb 1-1.1: Product: USB Receiver
  293. [ 5.627647] usb 1-1.1: Manufacturer: Logitech
  294. [ 5.642025] input: Logitech USB Receiver as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:046D:C52B.0001/input/input0
  295. [ 5.716325] hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:01:00.0-1.1/input0
  296. [ 5.739672] input: Logitech USB Receiver Mouse as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C52B.0002/input/input1
  297. [ 5.757485] input: Logitech USB Receiver Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C52B.0002/input/input2
  298. [ 5.805968] systemd[1]: System time before build time, advancing clock.
  299. [ 5.836196] input: Logitech USB Receiver System Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C52B.0002/input/input3
  300. [ 5.856156] hid-generic 0003:046D:C52B.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:01:00.0-1.1/input1
  301. [ 5.877396] hid-generic 0003:046D:C52B.0003: hiddev97,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:01:00.0-1.1/input2
  302. [ 5.893212] NET: Registered protocol family 10
  303. [ 5.931183] Segment Routing with IPv6
  304. [ 5.967616] systemd[1]: systemd 249.4-2-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
  305. [ 5.975849] usb 1-1.3: new full-speed USB device number 4 using xhci_hcd
  306. [ 6.003970] systemd[1]: Detected architecture arm64.
  307. [ 6.030210] systemd[1]: Hostname set to <PC19>.
  308. [ 6.129220] usb 1-1.3: New USB device found, idVendor=25a7, idProduct=1047, bcdDevice= 6.00
  309. [ 6.140824] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  310. [ 6.150297] usb 1-1.3: Product: ZY RMC
  311. [ 6.155817] usb 1-1.3: Manufacturer: ZY.Ltd
  312. [ 6.167547] input: ZY.Ltd ZY RMC as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:25A7:1047.0004/input/input5
  313. [ 6.202093] uart-pl011 fe201000.serial: no DMA platform data
  314. [ 6.248492] hid-generic 0003:25A7:1047.0004: input,hidraw3: USB HID v1.01 Keyboard [ZY.Ltd ZY RMC] on usb-0000:01:00.0-1.3/input0
  315. [ 6.269761] input: ZY.Ltd ZY RMC Mouse as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:25A7:1047.0005/input/input6
  316. [ 6.287321] input: ZY.Ltd ZY RMC Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:25A7:1047.0005/input/input7
  317. [ 6.364060] input: ZY.Ltd ZY RMC System Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:25A7:1047.0005/input/input8
  318. [ 6.382678] hid-generic 0003:25A7:1047.0005: input,hiddev98,hidraw4: USB HID v1.01 Mouse [ZY.Ltd ZY RMC] on usb-0000:01:00.0-1.3/input1
  319. [ 6.475155] systemd[1]: Queued start job for default target Graphical Interface.
  320. [ 6.485672] random: systemd: uninitialized urandom read (16 bytes read)
  321. [ 6.495346] systemd[1]: Created slice Slice /system/getty.
  322. [ 6.504928] random: systemd: uninitialized urandom read (16 bytes read)
  323. [ 6.513967] systemd[1]: Created slice Slice /system/modprobe.
  324. [ 6.523699] random: systemd: uninitialized urandom read (16 bytes read)
  325. [ 6.532644] systemd[1]: Created slice Slice /system/serial-getty.
  326. [ 6.543018] systemd[1]: Created slice User and Session Slice.
  327. [ 6.552926] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  328. [ 6.565011] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  329. [ 6.577022] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
  330. [ 6.590646] systemd[1]: Reached target Local Encrypted Volumes.
  331. [ 6.600785] systemd[1]: Reached target Path Units.
  332. [ 6.609719] systemd[1]: Reached target Remote File Systems.
  333. [ 6.619438] systemd[1]: Reached target Slice Units.
  334. [ 6.628433] systemd[1]: Reached target Swaps.
  335. [ 6.636902] systemd[1]: Reached target Local Verity Integrity Protected Volumes.
  336. [ 6.648603] systemd[1]: Listening on Device-mapper event daemon FIFOs.
  337. [ 6.662392] systemd[1]: Listening on Process Core Dump Socket.
  338. [ 6.675809] systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
  339. [ 6.686339] systemd[1]: Listening on Journal Socket (/dev/log).
  340. [ 6.696944] systemd[1]: Listening on Journal Socket.
  341. [ 6.706029] systemd[1]: Listening on Network Service Netlink Socket.
  342. [ 6.721445] systemd[1]: Listening on udev Control Socket.
  343. [ 6.731049] systemd[1]: Listening on udev Kernel Socket.
  344. [ 6.742192] systemd[1]: Mounting Huge Pages File System...
  345. [ 6.753144] systemd[1]: Mounting POSIX Message Queue File System...
  346. [ 6.764938] systemd[1]: Mounting Kernel Debug File System...
  347. [ 6.776110] systemd[1]: Mounting Kernel Trace File System...
  348. [ 6.792589] systemd[1]: Mounting Temporary Directory /tmp...
  349. [ 6.804991] systemd[1]: Starting Create List of Static Device Nodes...
  350. [ 6.817509] systemd[1]: Starting Load Kernel Module configfs...
  351. [ 6.828963] systemd[1]: Starting Load Kernel Module drm...
  352. [ 6.840008] systemd[1]: Starting Load Kernel Module fuse...
  353. [ 6.852610] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
  354. [ 6.853187] fuse: init (API version 7.32)
  355. [ 6.869965] systemd[1]: Condition check resulted in Load Kernel Modules being skipped.
  356. [ 6.881654] systemd[1]: Starting Remount Root and Kernel File Systems...
  357. [ 6.892518] systemd[1]: Condition check resulted in Repartition Root Disk being skipped.
  358. [ 6.904104] systemd[1]: Starting Apply Kernel Variables...
  359. [ 6.915148] systemd[1]: Starting Coldplug All udev Devices...
  360. [ 6.929245] systemd[1]: Mounted Huge Pages File System.
  361. [ 6.938387] systemd[1]: Mounted POSIX Message Queue File System.
  362. [ 6.948049] systemd[1]: Mounted Kernel Debug File System.
  363. [ 6.957000] systemd[1]: Mounted Kernel Trace File System.
  364. [ 6.965990] systemd[1]: Mounted Temporary Directory /tmp.
  365. [ 6.975402] systemd[1]: Finished Create List of Static Device Nodes.
  366. [ 6.988581] systemd[1]: [email protected]: Deactivated successfully.
  367. [ 6.997618] systemd[1]: Finished Load Kernel Module configfs.
  368. [ 7.007439] systemd[1]: [email protected]: Deactivated successfully.
  369. [ 7.016120] systemd[1]: Finished Load Kernel Module drm.
  370. [ 7.025102] systemd[1]: [email protected]: Deactivated successfully.
  371. [ 7.033652] systemd[1]: Finished Load Kernel Module fuse.
  372. [ 7.042587] systemd[1]: Finished Remount Root and Kernel File Systems.
  373. [ 7.052926] systemd[1]: Finished Apply Kernel Variables.
  374. [ 7.065206] systemd[1]: Mounting FUSE Control File System...
  375. [ 7.076298] systemd[1]: Mounting Kernel Configuration File System...
  376. [ 7.086344] systemd[1]: Condition check resulted in First Boot Wizard being skipped.
  377. [ 7.101060] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
  378. [ 7.113005] systemd[1]: Starting Load/Save Random Seed...
  379. [ 7.122324] systemd[1]: Condition check resulted in Create System Users being skipped.
  380. [ 7.133833] systemd[1]: Starting Create Static Device Nodes in /dev...
  381. [ 7.147975] systemd[1]: Starting CLI Netfilter Manager...
  382. [ 7.159113] systemd[1]: Mounted FUSE Control File System.
  383. [ 7.169320] systemd[1]: Finished Coldplug All udev Devices.
  384. [ 7.178861] systemd[1]: Mounted Kernel Configuration File System.
  385. [ 7.232866] systemd[1]: Finished Create Static Device Nodes in /dev.
  386. [ 7.243776] systemd[1]: Reached target Preparation for Local File Systems.
  387. [ 7.256138] systemd[1]: Set up automount net-192.168.4.51-mnt.automount.
  388. [ 7.267036] systemd[1]: Condition check resulted in Virtual Machine and Container Storage (Compatibility) being skipped.
  389. [ 7.279688] systemd[1]: Condition check resulted in Entropy Daemon based on the HAVEGE algorithm being skipped.
  390. [ 7.295409] systemd[1]: Starting Journal Service...
  391. [ 7.308074] systemd[1]: Starting Rule-based Manager for Device Events and Files...
  392. [ 7.394067] systemd[1]: Started Journal Service.
  393. [ 7.422479] systemd-journald[246]: Received client request to flush runtime journal.
  394. [ 7.429320] systemd-journald[246]: File /var/log/journal/ae2b95ed23d44658b292c597bcac356c/system.journal corrupted or uncleanly shut down, renaming and replacing.
  395. [ 7.682890] iproc-rng200 fe104000.rng: hwrng registered
  396. [ 7.730196] mc: Linux media interface: v0.10
  397. [ 7.770404] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 0
  398. [ 7.826871] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay)
  399. [ 7.841993] bcmgenet fd580000.ethernet eth0: Link is Down
  400. [ 7.859598] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
  401. [ 7.885888] videodev: Linux video capture interface: v2.00
  402. [ 7.899522] bcm2835_audio bcm2835_audio: card created with 4 channels
  403. [ 7.944210] bcm2835_audio bcm2835_audio: card created with 4 channels
  404. [ 7.946651] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
  405. [ 8.013901] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
  406. [ 8.021623] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
  407. [ 8.081204] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
  408. [ 8.090733] rpivid_hevc: module is from the staging directory, the quality is unknown, you have been warned.
  409. [ 8.146078] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
  410. [ 8.232220] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
  411. [ 8.246676] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
  412. [ 8.284904] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
  413. [ 8.296008] rpivid feb10000.codec: Device registered as /dev/video19
  414. [ 8.311171] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
  415. [ 8.312288] checking generic (3e402000 7f8000) vs hw (0 ffffffffffffffff)
  416. [ 8.321929] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
  417. [ 8.327426] fb0: switching to vc4drmfb from simple
  418. [ 8.352243] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
  419. [ 8.372557] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
  420. [ 8.385181] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
  421. [ 8.396710] Console: switching to colour dummy device 80x25
  422. [ 8.397899] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
  423. [ 8.428068] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
  424. [ 8.428249] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
  425. [ 8.428739] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
  426. [ 8.444193] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
  427. [ 8.444238] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
  428. [ 8.450290] bcm2835-codec bcm2835-codec: Device registered as /dev/video18
  429. [ 8.450332] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx
  430. [ 8.588405] vc4-drm gpu: bound fe600000.firmwarekms (ops vc4_fkms_ops [vc4])
  431. [ 8.601350] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 1
  432. [ 8.655737] Console: switching to colour frame buffer device 240x67
  433. [ 8.659858] logitech-djreceiver 0003:046D:C52B.0003: hiddev96,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:01:00.0-1.1/input2
  434. [ 8.713752] vc4-drm gpu: [drm] fb0: vc4drmfb frame buffer device
  435. [ 8.789576] input: Logitech Wireless Device PID:4024 Keyboard as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1/1-1.1:1.2/0003:046D:C52B.0003/0003:046D:4024.0006/input/input9
  436. [ 8.825029] input: Logitech Wireless Device PID:4024 Mouse as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1/1-1.1:1.2/0003:046D:C52B.0003/0003:046D:4024.0006/input/input10
  437. [ 8.864754] input: Logitech Wireless Device PID:4024 Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1/1-1.1:1.2/0003:046D:C52B.0003/0003:046D:4024.0006/input/input11
  438. [ 8.906097] hid-generic 0003:046D:4024.0006: input,hidraw1: USB HID v1.11 Keyboard [Logitech Wireless Device PID:4024] on usb-0000:01:00.0-1.1/input2:1
  439. [ 9.137699] 8021q: 802.1Q VLAN Support v1.8
  440. [ 9.206858] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  441. [ 9.229628] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  442. [ 9.269271] input: Logitech K400 as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1/1-1.1:1.2/0003:046D:C52B.0003/0003:046D:4024.0006/input/input15
  443. [ 9.288471] logitech-hidpp-device 0003:046D:4024.0006: input,hidraw1: USB HID v1.11 Keyboard [Logitech K400] on usb-0000:01:00.0-1.1/input2:1
  444. [ 9.667876] random: crng init done
  445. [ 9.667894] random: 7 urandom warning(s) missed due to ratelimiting
  446. [ 9.759926] Under-voltage detected! (0x00050005)
  447. [ 11.936086] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
  448. [ 11.944424] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  449. [ 13.791929] Voltage normalised (0x00000000)
  450. [ 24.104337] logitech-hidpp-device 0003:046D:4024.0006: HID++ 2.0 device connected.
  451.  
Advertisement
Add Comment
Please, Sign In to add comment