Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- kc7noa-IBase@linux-wc5e:~> LimeQuickTest
- [ TESTING STARTED ]
- ->Start time: Sun Mar 10 19:49:04 2019
- Cannot claim interface - Resource busy
- Failed to open device
- connection is not open
- Write(64 bytes) failed
- connection is not open
- Write(64 bytes) failed
- Failed to open. Device is busy.
- Error: Unable to connect
- Failed to connect
- kc7noa-IBase@linux-wc5e:~> LimeQuickTest
- [ TESTING STARTED ]
- ->Start time: Sun Mar 10 19:49:09 2019
- Read(64 bytes) failed
- Gateware version mismatch!
- Expected gateware version 2, revision 18
- But found version 0, revision 0
- Follow the FW and FPGA upgrade instructions:
- http://wiki.myriadrf.org/Lime_Suite#Flashing_images
- Or run update on the command line: LimeUtil --update
- Read(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- ->Device: LimeSDR-USB, media=USB 3.0, module=FX3, addr=1d50:6108, serial=0009060B00473825
- Serial Number: 0009060B00473825
- Write(64 bytes) failed
- [ Clock Network Test ]
- ->FX3 GPIF clock test
- Write(64 bytes) failed
- Write(64 bytes) failed
- ->FX3 GPIF clock test FAILED
- ->Si5351C test
- Write(64 bytes) failed
- Write(64 bytes) failed
- FAILED
- ->ADF4002 Test
- Write(64 bytes) failed
- FAILED
- ->VCTCXO test
- Write(64 bytes) failed
- FAILED
- ->Clock Network Test FAILED
- [ FPGA EEPROM Test ]
- ->Read EEPROM
- ->Read data: 11 01 13 11 01 13 02
- ->FPGA EEPROM Test PASSED
- [ LMS7002M Test ]
- ->Perform Registers Test
- Write(64 bytes) failed
- SPI_write() failed
- Write(64 bytes) failed
- SPI_write() failed
- Write(64 bytes) failed
- SPI_write() failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- ->LMS7002M Test FAILED
- [ RF Loopback Test ]
- ->Configure LMS
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- SetFrequencyCGEN(491.52 MHz) failed
- Failed to set sample rate
- ->RF Loopback Test FAILED
- => Board tests FAILED <=
- Elapsed time: 3.44 seconds
- kc7noa-IBase@linux-wc5e:~> LimeQuickTest
- [ TESTING STARTED ]
- ->Start time: Sun Mar 10 19:49:15 2019
- Read(64 bytes) failed
- Gateware version mismatch!
- Expected gateware version 2, revision 18
- But found version 0, revision 0
- Follow the FW and FPGA upgrade instructions:
- http://wiki.myriadrf.org/Lime_Suite#Flashing_images
- Or run update on the command line: LimeUtil --update
- Read(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- ->Device: LimeSDR-USB, media=USB 3.0, module=FX3, addr=1d50:6108, serial=0009060B00473825
- Serial Number: 0009060B00473825
- Write(64 bytes) failed
- [ Clock Network Test ]
- ->FX3 GPIF clock test
- Write(64 bytes) failed
- Write(64 bytes) failed
- ->FX3 GPIF clock test FAILED
- ->Si5351C test
- Write(64 bytes) failed
- Write(64 bytes) failed
- FAILED
- ->ADF4002 Test
- Write(64 bytes) failed
- FAILED
- ->VCTCXO test
- Write(64 bytes) failed
- FAILED
- ->Clock Network Test FAILED
- [ FPGA EEPROM Test ]
- ->Read EEPROM
- ->Read data: 11 01 13 11 01 13 02
- ->FPGA EEPROM Test PASSED
- [ LMS7002M Test ]
- ->Perform Registers Test
- Write(64 bytes) failed
- SPI_write() failed
- Write(64 bytes) failed
- SPI_write() failed
- Write(64 bytes) failed
- SPI_write() failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- ->LMS7002M Test FAILED
- [ RF Loopback Test ]
- ->Configure LMS
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- SetFrequencyCGEN(491.52 MHz) failed
- Failed to set sample rate
- ->RF Loopback Test FAILED
- => Board tests FAILED <=
- Elapsed time: 3.53 seconds
- kc7noa-IBase@linux-wc5e:~> LimeQuickTest
- [ TESTING STARTED ]
- ->Start time: Sun Mar 10 19:53:36 2019
- Read(64 bytes) failed
- Gateware version mismatch!
- Expected gateware version 2, revision 18
- But found version 0, revision 0
- Follow the FW and FPGA upgrade instructions:
- http://wiki.myriadrf.org/Lime_Suite#Flashing_images
- Or run update on the command line: LimeUtil --update
- Read(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- ->Device: LimeSDR-USB, media=USB 3.0, module=FX3, addr=1d50:6108, serial=0009060B00473825
- Serial Number: 0009060B00473825
- Write(64 bytes) failed
- [ Clock Network Test ]
- ->FX3 GPIF clock test
- Write(64 bytes) failed
- Write(64 bytes) failed
- ->FX3 GPIF clock test FAILED
- ->Si5351C test
- Write(64 bytes) failed
- Write(64 bytes) failed
- FAILED
- ->ADF4002 Test
- Write(64 bytes) failed
- FAILED
- ->VCTCXO test
- Write(64 bytes) failed
- FAILED
- ->Clock Network Test FAILED
- [ FPGA EEPROM Test ]
- ->Read EEPROM
- ->Read data: 11 01 13 11 01 13 02
- ->FPGA EEPROM Test PASSED
- [ LMS7002M Test ]
- ->Perform Registers Test
- Write(64 bytes) failed
- SPI_write() failed
- Write(64 bytes) failed
- SPI_write() failed
- Write(64 bytes) failed
- SPI_write() failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- ->LMS7002M Test FAILED
- [ RF Loopback Test ]
- ->Configure LMS
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- SetFrequencyCGEN(491.52 MHz) failed
- Failed to set sample rate
- ->RF Loopback Test FAILED
- => Board tests FAILED <=
- Elapsed time: 3.54 seconds
- kc7noa-IBase@linux-wc5e:~> LimeQuickTest
- [ TESTING STARTED ]
- ->Start time: Sun Mar 10 19:53:42 2019
- Read(64 bytes) failed
- Gateware version mismatch!
- Expected gateware version 2, revision 18
- But found version 0, revision 0
- Follow the FW and FPGA upgrade instructions:
- http://wiki.myriadrf.org/Lime_Suite#Flashing_images
- Or run update on the command line: LimeUtil --update
- Read(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- ->Device: LimeSDR-USB, media=USB 3.0, module=FX3, addr=1d50:6108, serial=0009060B00473825
- Serial Number: 0009060B00473825
- Write(64 bytes) failed
- [ Clock Network Test ]
- ->FX3 GPIF clock test
- Write(64 bytes) failed
- Write(64 bytes) failed
- ->FX3 GPIF clock test FAILED
- ->Si5351C test
- Write(64 bytes) failed
- Write(64 bytes) failed
- FAILED
- ->ADF4002 Test
- Write(64 bytes) failed
- FAILED
- ->VCTCXO test
- Write(64 bytes) failed
- FAILED
- ->Clock Network Test FAILED
- [ FPGA EEPROM Test ]
- ->Read EEPROM
- ->Read data: 11 01 13 11 01 13 02
- ->FPGA EEPROM Test PASSED
- [ LMS7002M Test ]
- ->Perform Registers Test
- Write(64 bytes) failed
- SPI_write() failed
- Write(64 bytes) failed
- SPI_write() failed
- Write(64 bytes) failed
- SPI_write() failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- ->LMS7002M Test FAILED
- [ RF Loopback Test ]
- ->Configure LMS
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- SetFrequencyCGEN(491.52 MHz) failed
- Failed to set sample rate
- ->RF Loopback Test FAILED
- => Board tests FAILED <=
- Elapsed time: 3.54 seconds
- kc7noa-IBase@linux-wc5e:~> LimeQuickTest
- [ TESTING STARTED ]
- ->Start time: Sun Mar 10 19:53:58 2019
- Read(64 bytes) failed
- Gateware version mismatch!
- Expected gateware version 2, revision 18
- But found version 0, revision 0
- Follow the FW and FPGA upgrade instructions:
- http://wiki.myriadrf.org/Lime_Suite#Flashing_images
- Or run update on the command line: LimeUtil --update
- Read(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- ->Device: LimeSDR-USB, media=USB 3.0, module=FX3, addr=1d50:6108, serial=0009060B00473825
- Serial Number: 0009060B00473825
- Write(64 bytes) failed
- [ Clock Network Test ]
- ->FX3 GPIF clock test
- Write(64 bytes) failed
- Write(64 bytes) failed
- ->FX3 GPIF clock test FAILED
- ->Si5351C test
- Write(64 bytes) failed
- Write(64 bytes) failed
- FAILED
- ->ADF4002 Test
- Write(64 bytes) failed
- FAILED
- ->VCTCXO test
- Write(64 bytes) failed
- FAILED
- ->Clock Network Test FAILED
- [ FPGA EEPROM Test ]
- ->Read EEPROM
- ->Read data: 11 01 13 11 01 13 02
- ->FPGA EEPROM Test PASSED
- [ LMS7002M Test ]
- ->Perform Registers Test
- Write(64 bytes) failed
- SPI_write() failed
- Write(64 bytes) failed
- SPI_write() failed
- Write(64 bytes) failed
- SPI_write() failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- ->LMS7002M Test FAILED
- [ RF Loopback Test ]
- ->Configure LMS
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- SetFrequencyCGEN(491.52 MHz) failed
- Failed to set sample rate
- ->RF Loopback Test FAILED
- => Board tests FAILED <=
- Elapsed time: 3.54 seconds
- kc7noa-IBase@linux-wc5e:~> LimeQuickTest
- [ TESTING STARTED ]
- ->Start time: Sun Mar 10 19:55:09 2019
- Read(64 bytes) failed
- Gateware version mismatch!
- Expected gateware version 2, revision 18
- But found version 0, revision 0
- Follow the FW and FPGA upgrade instructions:
- http://wiki.myriadrf.org/Lime_Suite#Flashing_images
- Or run update on the command line: LimeUtil --update
- Read(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- ->Device: LimeSDR-USB, media=USB 3.0, module=FX3, addr=1d50:6108, serial=0009060B00473825
- Serial Number: 0009060B00473825
- Write(64 bytes) failed
- [ Clock Network Test ]
- ->FX3 GPIF clock test
- Write(64 bytes) failed
- Write(64 bytes) failed
- ->FX3 GPIF clock test FAILED
- ->Si5351C test
- Write(64 bytes) failed
- Write(64 bytes) failed
- FAILED
- ->ADF4002 Test
- Write(64 bytes) failed
- FAILED
- ->VCTCXO test
- Write(64 bytes) failed
- FAILED
- ->Clock Network Test FAILED
- [ FPGA EEPROM Test ]
- ->Read EEPROM
- ->Read data: 11 01 13 11 01 13 02
- ->FPGA EEPROM Test PASSED
- [ LMS7002M Test ]
- ->Perform Registers Test
- Write(64 bytes) failed
- SPI_write() failed
- Write(64 bytes) failed
- SPI_write() failed
- Write(64 bytes) failed
- SPI_write() failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- ->LMS7002M Test FAILED
- [ RF Loopback Test ]
- ->Configure LMS
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- SetFrequencyCGEN(491.52 MHz) failed
- Failed to set sample rate
- ->RF Loopback Test FAILED
- => Board tests FAILED <=
- Elapsed time: 3.54 seconds
- kc7noa-IBase@linux-wc5e:~> LimeQuickTest
- [ TESTING STARTED ]
- ->Start time: Sun Mar 10 19:55:30 2019
- Read(64 bytes) failed
- Gateware version mismatch!
- Expected gateware version 2, revision 18
- But found version 0, revision 0
- Follow the FW and FPGA upgrade instructions:
- http://wiki.myriadrf.org/Lime_Suite#Flashing_images
- Or run update on the command line: LimeUtil --update
- Read(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- ->Device: LimeSDR-USB, media=USB 3.0, module=FX3, addr=1d50:6108, serial=0009060B00473825
- Serial Number: 0009060B00473825
- Write(64 bytes) failed
- [ Clock Network Test ]
- ->FX3 GPIF clock test
- Write(64 bytes) failed
- Write(64 bytes) failed
- ->FX3 GPIF clock test FAILED
- ->Si5351C test
- Write(64 bytes) failed
- Write(64 bytes) failed
- FAILED
- ->ADF4002 Test
- Write(64 bytes) failed
- FAILED
- ->VCTCXO test
- Write(64 bytes) failed
- FAILED
- ->Clock Network Test FAILED
- [ FPGA EEPROM Test ]
- ->Read EEPROM
- ->Read data: 11 01 13 11 01 13 02
- ->FPGA EEPROM Test PASSED
- [ LMS7002M Test ]
- ->Perform Registers Test
- Write(64 bytes) failed
- SPI_write() failed
- Write(64 bytes) failed
- SPI_write() failed
- Write(64 bytes) failed
- SPI_write() failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- ->LMS7002M Test FAILED
- [ RF Loopback Test ]
- ->Configure LMS
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- SetFrequencyCGEN(491.52 MHz) failed
- Failed to set sample rate
- ->RF Loopback Test FAILED
- => Board tests FAILED <=
- Elapsed time: 3.54 seconds
- kc7noa-IBase@linux-wc5e:~> LimeQuickTest
- [ TESTING STARTED ]
- ->Start time: Sun Mar 10 19:57:53 2019
- Read(64 bytes) failed
- Gateware version mismatch!
- Expected gateware version 2, revision 18
- But found version 0, revision 0
- Follow the FW and FPGA upgrade instructions:
- http://wiki.myriadrf.org/Lime_Suite#Flashing_images
- Or run update on the command line: LimeUtil --update
- Read(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- ->Device: LimeSDR-USB, media=USB 3.0, module=FX3, addr=1d50:6108, serial=0009060B00473825
- Serial Number: 0009060B00473825
- Write(64 bytes) failed
- [ Clock Network Test ]
- ->FX3 GPIF clock test
- Write(64 bytes) failed
- Write(64 bytes) failed
- ->FX3 GPIF clock test FAILED
- ->Si5351C test
- Write(64 bytes) failed
- Write(64 bytes) failed
- FAILED
- ->ADF4002 Test
- Write(64 bytes) failed
- FAILED
- ->VCTCXO test
- Write(64 bytes) failed
- FAILED
- ->Clock Network Test FAILED
- [ FPGA EEPROM Test ]
- ->Read EEPROM
- ->Read data: 11 01 13 11 01 13 02
- ->FPGA EEPROM Test PASSED
- [ LMS7002M Test ]
- ->Perform Registers Test
- Write(64 bytes) failed
- SPI_write() failed
- Write(64 bytes) failed
- SPI_write() failed
- Write(64 bytes) failed
- SPI_write() failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- ->LMS7002M Test FAILED
- [ RF Loopback Test ]
- ->Configure LMS
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- SetFrequencyCGEN(491.52 MHz) failed
- Failed to set sample rate
- ->RF Loopback Test FAILED
- => Board tests FAILED <=
- Elapsed time: 3.54 seconds
- kc7noa-IBase@linux-wc5e:~> LimeQuickTest
- [ TESTING STARTED ]
- ->Start time: Sun Mar 10 19:58:14 2019
- Read(64 bytes) failed
- Gateware version mismatch!
- Expected gateware version 2, revision 18
- But found version 0, revision 0
- Follow the FW and FPGA upgrade instructions:
- http://wiki.myriadrf.org/Lime_Suite#Flashing_images
- Or run update on the command line: LimeUtil --update
- Read(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- ->Device: LimeSDR-USB, media=USB 3.0, module=FX3, addr=1d50:6108, serial=0009060B00473825
- Serial Number: 0009060B00473825
- Write(64 bytes) failed
- [ Clock Network Test ]
- ->FX3 GPIF clock test
- Write(64 bytes) failed
- Write(64 bytes) failed
- ->FX3 GPIF clock test FAILED
- ->Si5351C test
- Write(64 bytes) failed
- Write(64 bytes) failed
- FAILED
- ->ADF4002 Test
- Write(64 bytes) failed
- FAILED
- ->VCTCXO test
- Write(64 bytes) failed
- FAILED
- ->Clock Network Test FAILED
- [ FPGA EEPROM Test ]
- ->Read EEPROM
- ->Read data: 11 01 13 11 01 13 02
- ->FPGA EEPROM Test PASSED
- [ LMS7002M Test ]
- ->Perform Registers Test
- Write(64 bytes) failed
- SPI_write() failed
- Write(64 bytes) failed
- SPI_write() failed
- Write(64 bytes) failed
- SPI_write() failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- ->LMS7002M Test FAILED
- [ RF Loopback Test ]
- ->Configure LMS
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- Write(64 bytes) failed
- SetFrequencyCGEN(491.52 MHz) failed
- Failed to set sample rate
- ->RF Loopback Test FAILED
- => Board tests FAILED <=
- Elapsed time: 3.53 seconds
- kc7noa-IBase@linux-wc5e:~> LimeQuickTest
- [ TESTING STARTED ]
- ->Start time: Sun Mar 10 19:58:30 2019
- Gateware version mismatch!
- Expected gateware version 2, revision 18
- But found version 2, revision 20
- Follow the FW and FPGA upgrade instructions:
- http://wiki.myriadrf.org/Lime_Suite#Flashing_images
- Or run update on the command line: LimeUtil --update
- ->Device: LimeSDR-USB, media=USB 3.0, module=FX3, addr=1d50:6108, serial=0009060B00473825
- Serial Number: 0009060B00473825
- [ Clock Network Test ]
- ->FX3 GPIF clock test
- Test results: 48100; 51856; 55612 - PASSED
- ->Si5351C test
- CLK0: 17554 / 17554 - PASSED
- CLK1: 17554 / 17554 - PASSED
- CLK2: 17554 / 17554 - PASSED
- CLK3: 17554 / 17554 - PASSED
- CLK4: 17554 / 17554 - PASSED
- CLK5: 17554 / 17554 - PASSED
- CLK6: 17554 / 17554 - PASSED
- ->ADF4002 Test
- Result: 10 - PASSED
- ->VCTCXO test
- Results : 5112960 (min); 5113094 (max) - PASSED
- ->Clock Network Test PASSED
- [ FPGA EEPROM Test ]
- ->Read EEPROM
- ->Read data: 11 01 13 11 01 13 02
- ->FPGA EEPROM Test PASSED
- [ LMS7002M Test ]
- ->Perform Registers Test
- ->External Reset line test
- Reg 0x20: Write value 0xFFFD, Read value 0xFFFD
- Reg 0x20: value after reset 0x0FFFF
- ->LMS7002M Test PASSED
- [ RF Loopback Test ]
- ->Configure LMS
- ->Run Tests (TX_2-> LNA_L):
- CH0 (SXR=800.0MHz, SXT=805.0MHz): Result:(-13.5 dBFS, 5.00 MHz) - PASSED
- CH1 (SXR=800.0MHz, SXT=805.0MHz): Result:(-15.4 dBFS, 5.00 MHz) - PASSED
- ->Run Tests (TX_1 -> LNA_W):
- CH0 (SXR=1800.0MHz, SXT=1805.0MHz): Result:(-13.7 dBFS, 5.00 MHz) - PASSED
- CH1 (SXR=1800.0MHz, SXT=1805.0MHz): Result:(-19.4 dBFS, 5.00 MHz) - PASSED
- ->Run Tests (TX_2-> LNA_H):
- CH0 (SXR=2500.0MHz, SXT=2505.0MHz): Result:(-18.3 dBFS, 5.00 MHz) - PASSED
- CH1 (SXR=2500.0MHz, SXT=2505.0MHz): Result:(-12.8 dBFS, 5.00 MHz) - PASSED
- ->RF Loopback Test PASSED
- => Board tests PASSED <=
- Elapsed time: 1.60 seconds
- kc7noa-IBase@linux-wc5e:~>
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement