[    0.000000] Linux version 5.3.0-29-generic (buildd@lcy01-amd64-024) (gcc version 9.2.1 20191008 (Ubuntu 9.2.1-9ubuntu2)) #31-Ubuntu SMP Fri Jan 17 17:27:26 UTC 2020 (Ubuntu 5.3.0-29.31-generic 5.3.13)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.3.0-29-generic root=UUID=24d514a3-b25c-4ab8-b25f-fc7aa90106bc ro quiet splash iommu=pt vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000]   zhaoxin   Shanghai
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009e01fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000009e02000-0x0000000009ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a20afff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000000a20b000-0x000000000affffff] usable
[    0.000000] BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000b020000-0x000000005b5fdfff] usable
[    0.000000] BIOS-e820: [mem 0x000000005b5fe000-0x000000005b713fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000005b714000-0x000000005b894fff] usable
[    0.000000] BIOS-e820: [mem 0x000000005b895000-0x000000005bca5fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000005bca6000-0x000000005cb0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000005cb10000-0x000000005cba0fff] type 20
[    0.000000] BIOS-e820: [mem 0x000000005cba1000-0x000000005effffff] usable
[    0.000000] BIOS-e820: [mem 0x000000005f000000-0x00000000dfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fd000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021f33ffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.70 by American Megatrends
[    0.000000] efi:  ACPI 2.0=0x5bc22000  ACPI=0x5bc22000  SMBIOS=0x5c9fa000  SMBIOS 3.0=0x5c9f9000  MEMATTR=0x59f7a018  ESRT=0x576f7698
[    0.000000] secureboot: Secure boot could not be determined (mode 0)
[    0.000000] SMBIOS 3.2.0 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. B450M S2H/B450M S2H, BIOS F50a 11/08/2019
[    0.000000] tsc: Fast TSC calibration failed
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] last_pfn = 0x21f340 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF write-through
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000C0000000 mask FFFFE0000000 write-back
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000220000000 aka 8704M
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT
[    0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[    0.000000] last_pfn = 0x5f000 max_arch_pfn = 0x400000000
[    0.000000] esrt: Reserving ESRT space from 0x00000000576f7698 to 0x00000000576f76d0.
[    0.000000] check: Scanning 1 areas for low memory corruption
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x10a401000, 0x10a401fff] PGTABLE
[    0.000000] BRK [0x10a402000, 0x10a402fff] PGTABLE
[    0.000000] BRK [0x10a403000, 0x10a403fff] PGTABLE
[    0.000000] BRK [0x10a404000, 0x10a404fff] PGTABLE
[    0.000000] BRK [0x10a405000, 0x10a405fff] PGTABLE
[    0.000000] BRK [0x10a406000, 0x10a406fff] PGTABLE
[    0.000000] BRK [0x10a407000, 0x10a407fff] PGTABLE
[    0.000000] BRK [0x10a408000, 0x10a408fff] PGTABLE
[    0.000000] BRK [0x10a409000, 0x10a409fff] PGTABLE
[    0.000000] BRK [0x10a40a000, 0x10a40afff] PGTABLE
[    0.000000] BRK [0x10a40b000, 0x10a40bfff] PGTABLE
[    0.000000] BRK [0x10a40c000, 0x10a40cfff] PGTABLE
[    0.000000] RAMDISK: [mem 0x324af000-0x3524efff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x000000005BC22000 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x000000005BC220A8 0000D4 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x000000005BC28E50 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x000000005BC22218 006C35 (v02 ALASKA A M I    01072009 INTL 20160930)
[    0.000000] ACPI: FACS 0x000000005BC8EE00 000040
[    0.000000] ACPI: APIC 0x000000005BC28F68 00015E (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x000000005BC290C8 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FIDT 0x000000005BC29110 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x000000005BC291B0 000060 (v02 ALASKA A M I    01072009 AMI  01072009)
[    0.000000] ACPI: SSDT 0x000000005BC29210 005419 (v02 ALASKA A M I    00000002 MSFT 04000000)
[    0.000000] ACPI: SSDT 0x000000005BC2E630 003699 (v01 ALASKA A M I    00000001 INTL 20160930)
[    0.000000] ACPI: MCFG 0x000000005BC31CD0 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
[    0.000000] ACPI: SSDT 0x000000005BC31D10 006817 (v01 ALASKA A M I    00000001 INTL 20160930)
[    0.000000] ACPI: HPET 0x000000005BC38528 000038 (v01 ALASKA A M I    01072009 AMI  00000005)
[    0.000000] ACPI: UEFI 0x000000005BC38560 000042 (v01 ALASKA A M I    00000002      01000013)
[    0.000000] ACPI: BGRT 0x000000005BC385A8 000038 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: IVRS 0x000000005BC385E0 0000D0 (v02 ALASKA A M I    00000001 AMD  00000000)
[    0.000000] ACPI: SSDT 0x000000005BC386B0 000854 (v01 ALASKA A M I    00000001 AMD  00000001)
[    0.000000] ACPI: CRAT 0x000000005BC38F08 000810 (v01 ALASKA A M I    00000001 AMD  00000001)
[    0.000000] ACPI: CDIT 0x000000005BC39718 000029 (v01 ALASKA A M I    00000001 AMD  00000001)
[    0.000000] ACPI: SSDT 0x000000005BC39748 0012BE (v01 ALASKA A M I    00000001 INTL 20160930)
[    0.000000] ACPI: SSDT 0x000000005BC3AA08 00146E (v01 ALASKA A M I    00000001 INTL 20160930)
[    0.000000] ACPI: SSDT 0x000000005BC3BE78 001EC3 (v01 ALASKA A M I    00000001 INTL 20160930)
[    0.000000] ACPI: SSDT 0x000000005BC3DD40 0000BF (v01 ALASKA A M I    00001000 INTL 20160930)
[    0.000000] ACPI: WSMT 0x000000005BC3DE00 000028 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x000000005BC3DE28 0013F0 (v01 ALASKA A M I    00000001 INTL 20160930)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000021f33ffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x21f315000-0x21f33ffff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000021f33ffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009ffff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000009e01fff]
[    0.000000]   node   0: [mem 0x000000000a000000-0x000000000a1fffff]
[    0.000000]   node   0: [mem 0x000000000a20b000-0x000000000affffff]
[    0.000000]   node   0: [mem 0x000000000b020000-0x000000005b5fdfff]
[    0.000000]   node   0: [mem 0x000000005b714000-0x000000005b894fff]
[    0.000000]   node   0: [mem 0x000000005cba1000-0x000000005effffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000021f33ffff]
[    0.000000] Zeroed struct page in unavailable ranges: 9900 pages
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021f33ffff]
[    0.000000] On node 0 totalpages: 1559700
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 34 pages reserved
[    0.000000]   DMA zone: 3999 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 5927 pages used for memmap
[    0.000000]   DMA32 zone: 379317 pages, LIFO batch:63
[    0.000000]   Normal zone: 18381 pages used for memmap
[    0.000000]   Normal zone: 1176384 pages, LIFO batch:63
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
[    0.000000] IOAPIC[1]: apic_id 6, version 33, address 0xfec01000, GSI 24-55
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000
[    0.000000] smpboot: Allowing 32 CPUs, 28 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x09e02000-0x09ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x0a200000-0x0a20afff]
[    0.000000] PM: Registered nosave memory: [mem 0x0b000000-0x0b01ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x5b5fe000-0x5b713fff]
[    0.000000] PM: Registered nosave memory: [mem 0x5b895000-0x5bca5fff]
[    0.000000] PM: Registered nosave memory: [mem 0x5bca6000-0x5cb0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x5cb10000-0x5cba0fff]
[    0.000000] PM: Registered nosave memory: [mem 0x5f000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfcffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfd000000-0xffffffff]
[    0.000000] [mem 0xe0000000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:1
[    0.000000] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u262144
[    0.000000] pcpu-alloc: s184320 r8192 d28672 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
[    0.000000] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1535294
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.3.0-29-generic root=UUID=24d514a3-b25c-4ab8-b25f-fc7aa90106bc ro quiet splash iommu=pt vt.handoff=7
[    0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 5872228K/6238800K available (14339K kernel code, 2388K rwdata, 4728K rodata, 2668K init, 5056K bss, 366572K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
[    0.000000] ftrace: allocating 43225 entries in 169 pages
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=32.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32
[    0.000000] NR_IRQS: 524544, nr_irqs: 1224, preallocated irqs: 16
[    0.000000] random: crng done (trusting CPU's manufacturer)
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] printk: console [tty0] enabled
[    0.000000] ACPI: Core revision 20190703
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.004000] Switched APIC routing to physical flat.
[    0.004000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.032000] tsc: PIT calibration matches HPET. 2 loops
[    0.032000] tsc: Detected 3493.419 MHz processor
[    0.000004] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x325b084a074, max_idle_ns: 440795239289 ns
[    0.000006] Calibrating delay loop (skipped), value calculated using timer frequency.. 6986.83 BogoMIPS (lpj=13973676)
[    0.000008] pid_max: default: 32768 minimum: 301
[    0.003781] LSM: Security Framework initializing
[    0.003822] Yama: becoming mindful.
[    0.004118] AppArmor: AppArmor initialized
[    0.004317] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.004334] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.004722] *** VALIDATE proc ***
[    0.004795] *** VALIDATE cgroup1 ***
[    0.004797] *** VALIDATE cgroup2 ***
[    0.005032] LVT offset 1 assigned for vector 0xf9
[    0.005081] LVT offset 2 assigned for vector 0xf4
[    0.005095] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
[    0.005095] Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0
[    0.005098] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.005099] Spectre V2 : Mitigation: Full AMD retpoline
[    0.005099] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.005100] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.005101] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.005277] Freeing SMP alternatives memory: 36K
[    0.119156] smpboot: CPU0: AMD Ryzen 3 2200G with Radeon Vega Graphics (family: 0x17, model: 0x11, stepping: 0x0)
[    0.119624] Performance Events: Fam17h core perfctr, AMD PMU driver.
[    0.119629] ... version:                0
[    0.119629] ... bit width:              48
[    0.119630] ... generic registers:      6
[    0.119630] ... value mask:             0000ffffffffffff
[    0.119631] ... max period:             00007fffffffffff
[    0.119631] ... fixed-purpose events:   0
[    0.119631] ... event mask:             000000000000003f
[    0.119697] rcu: Hierarchical SRCU implementation.
[    0.120005] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.120005] smp: Bringing up secondary CPUs ...
[    0.120005] x86: Booting SMP configuration:
[    0.120005] .... node  #0, CPUs:        #1  #2  #3
[    0.124096] smp: Brought up 1 node, 4 CPUs
[    0.124096] smpboot: Max logical packages: 8
[    0.124096] smpboot: Total of 4 processors activated (27947.35 BogoMIPS)
[    0.124836] devtmpfs: initialized
[    0.124836] x86/mm: Memory block size: 128MB
[    0.128046] PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20afff] (45056 bytes)
[    0.128050] PM: Registering ACPI NVS region [mem 0x5b895000-0x5bca5fff] (4263936 bytes)
[    0.128250] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.128250] futex hash table entries: 8192 (order: 7, 524288 bytes, linear)
[    0.129423] pinctrl core: initialized pinctrl subsystem
[    0.129583] PM: RTC time: 19:24:56, date: 2020-01-30
[    0.130095] NET: Registered protocol family 16
[    0.130202] audit: initializing netlink subsys (disabled)
[    0.130209] audit: type=2000 audit(1580412295.160:1): state=initialized audit_enabled=0 res=1
[    0.130209] EISA bus registered
[    0.130209] cpuidle: using governor ladder
[    0.130209] cpuidle: using governor menu
[    0.130209] ACPI: bus type PCI registered
[    0.130209] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.130209] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.130209] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.130209] PCI: Using configuration type 1 for base access
[    0.132773] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.132773] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.136100] ACPI: Added _OSI(Module Device)
[    0.136100] ACPI: Added _OSI(Processor Device)
[    0.136101] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.136101] ACPI: Added _OSI(Processor Aggregator Device)
[    0.136102] ACPI: Added _OSI(Linux-Dell-Video)
[    0.136103] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.136104] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.152413] ACPI: 11 ACPI AML tables successfully acquired and loaded
[    0.153781] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.159622] ACPI: Interpreter enabled
[    0.159636] ACPI: (supports S0 S3 S4 S5)
[    0.159637] ACPI: Using IOAPIC for interrupt routing
[    0.160010] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.160384] ACPI: Enabled 2 GPEs in block 00 to 1F
[    0.173404] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.173409] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.173588] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR]
[    0.173750] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.173760] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.174071] PCI host bridge to bus 0000:00
[    0.174073] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    0.174074] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    0.174074] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[    0.174075] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.174076] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.174077] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.174078] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff window]
[    0.174078] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
[    0.174079] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.174089] pci 0000:00:00.0: [1022:15d0] type 00 class 0x060000
[    0.174213] pci 0000:00:00.2: [1022:15d1] type 00 class 0x080600
[    0.174369] pci 0000:00:01.0: [1022:1452] type 00 class 0x060000
[    0.174491] pci 0000:00:01.1: [1022:15d3] type 01 class 0x060400
[    0.174545] pci 0000:00:01.1: enabling Extended Tags
[    0.174603] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
[    0.174714] pci 0000:00:01.2: [1022:15d3] type 01 class 0x060400
[    0.174768] pci 0000:00:01.2: enabling Extended Tags
[    0.174825] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
[    0.174933] pci 0000:00:01.3: [1022:15d3] type 01 class 0x060400
[    0.174987] pci 0000:00:01.3: enabling Extended Tags
[    0.175044] pci 0000:00:01.3: PME# supported from D0 D3hot D3cold
[    0.175168] pci 0000:00:08.0: [1022:1452] type 00 class 0x060000
[    0.175279] pci 0000:00:08.1: [1022:15db] type 01 class 0x060400
[    0.175337] pci 0000:00:08.1: enabling Extended Tags
[    0.175395] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[    0.175501] pci 0000:00:08.2: [1022:15dc] type 01 class 0x060400
[    0.175559] pci 0000:00:08.2: enabling Extended Tags
[    0.175616] pci 0000:00:08.2: PME# supported from D0 D3hot D3cold
[    0.175754] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
[    0.175935] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
[    0.176167] pci 0000:00:18.0: [1022:15e8] type 00 class 0x060000
[    0.176217] pci 0000:00:18.1: [1022:15e9] type 00 class 0x060000
[    0.176274] pci 0000:00:18.2: [1022:15ea] type 00 class 0x060000
[    0.176324] pci 0000:00:18.3: [1022:15eb] type 00 class 0x060000
[    0.176373] pci 0000:00:18.4: [1022:15ec] type 00 class 0x060000
[    0.176423] pci 0000:00:18.5: [1022:15ed] type 00 class 0x060000
[    0.176472] pci 0000:00:18.6: [1022:15ee] type 00 class 0x060000
[    0.176529] pci 0000:00:18.7: [1022:15ef] type 00 class 0x060000
[    0.176682] pci 0000:01:00.0: [1131:7162] type 00 class 0x048000
[    0.176716] pci 0000:01:00.0: reg 0x10: [mem 0xfcf00000-0xfcffffff 64bit]
[    0.176826] pci 0000:01:00.0: supports D1 D2
[    0.176827] pci 0000:01:00.0: PME# supported from D0 D1 D2
[    0.176910] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.176918] pci 0000:00:01.1: PCI bridge to [bus 01]
[    0.176925] pci 0000:00:01.1:   bridge window [mem 0xfcf00000-0xfcffffff]
[    0.177005] pci 0000:02:00.0: [1022:43d5] type 00 class 0x0c0330
[    0.177034] pci 0000:02:00.0: reg 0x10: [mem 0xfcca0000-0xfcca7fff 64bit]
[    0.177083] pci 0000:02:00.0: enabling Extended Tags
[    0.177147] pci 0000:02:00.0: PME# supported from D3hot D3cold
[    0.177249] pci 0000:02:00.1: [1022:43c8] type 00 class 0x010601
[    0.177312] pci 0000:02:00.1: reg 0x24: [mem 0xfcc80000-0xfcc9ffff]
[    0.177321] pci 0000:02:00.1: reg 0x30: [mem 0xfcc00000-0xfcc7ffff pref]
[    0.177328] pci 0000:02:00.1: enabling Extended Tags
[    0.177378] pci 0000:02:00.1: PME# supported from D3hot D3cold
[    0.177449] pci 0000:02:00.2: [1022:43c6] type 01 class 0x060400
[    0.177508] pci 0000:02:00.2: enabling Extended Tags
[    0.177564] pci 0000:02:00.2: PME# supported from D3hot D3cold
[    0.177686] pci 0000:00:01.2: PCI bridge to [bus 02-09]
[    0.177690] pci 0000:00:01.2:   bridge window [io  0xf000-0xffff]
[    0.177693] pci 0000:00:01.2:   bridge window [mem 0xfca00000-0xfccfffff]
[    0.177812] pci 0000:03:00.0: [1022:43c7] type 01 class 0x060400
[    0.177877] pci 0000:03:00.0: enabling Extended Tags
[    0.177946] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.178044] pci 0000:03:01.0: [1022:43c7] type 01 class 0x060400
[    0.178108] pci 0000:03:01.0: enabling Extended Tags
[    0.178178] pci 0000:03:01.0: PME# supported from D3hot D3cold
[    0.178294] pci 0000:03:04.0: [1022:43c7] type 01 class 0x060400
[    0.178358] pci 0000:03:04.0: enabling Extended Tags
[    0.178427] pci 0000:03:04.0: PME# supported from D3hot D3cold
[    0.178532] pci 0000:03:05.0: [1022:43c7] type 01 class 0x060400
[    0.178597] pci 0000:03:05.0: enabling Extended Tags
[    0.178666] pci 0000:03:05.0: PME# supported from D3hot D3cold
[    0.178766] pci 0000:03:06.0: [1022:43c7] type 01 class 0x060400
[    0.178831] pci 0000:03:06.0: enabling Extended Tags
[    0.178900] pci 0000:03:06.0: PME# supported from D3hot D3cold
[    0.179000] pci 0000:03:07.0: [1022:43c7] type 01 class 0x060400
[    0.179064] pci 0000:03:07.0: enabling Extended Tags
[    0.179133] pci 0000:03:07.0: PME# supported from D3hot D3cold
[    0.179250] pci 0000:02:00.2: PCI bridge to [bus 03-09]
[    0.179256] pci 0000:02:00.2:   bridge window [io  0xf000-0xffff]
[    0.179259] pci 0000:02:00.2:   bridge window [mem 0xfca00000-0xfcbfffff]
[    0.179317] pci 0000:03:00.0: PCI bridge to [bus 04]
[    0.179375] pci 0000:03:01.0: PCI bridge to [bus 05]
[    0.179440] pci 0000:03:04.0: PCI bridge to [bus 06]
[    0.179519] pci 0000:07:00.0: [8086:2526] type 00 class 0x028000
[    0.179566] pci 0000:07:00.0: reg 0x10: [mem 0xfcb00000-0xfcb03fff 64bit]
[    0.179741] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
[    0.179901] pci 0000:03:05.0: PCI bridge to [bus 07]
[    0.179909] pci 0000:03:05.0:   bridge window [mem 0xfcb00000-0xfcbfffff]
[    0.179960] pci 0000:03:06.0: PCI bridge to [bus 08]
[    0.180045] pci 0000:09:00.0: [10ec:8168] type 00 class 0x020000
[    0.180093] pci 0000:09:00.0: reg 0x10: [io  0xf000-0xf0ff]
[    0.180134] pci 0000:09:00.0: reg 0x18: [mem 0xfca04000-0xfca04fff 64bit]
[    0.180160] pci 0000:09:00.0: reg 0x20: [mem 0xfca00000-0xfca03fff 64bit]
[    0.180321] pci 0000:09:00.0: supports D1 D2
[    0.180322] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.180525] pci 0000:03:07.0: PCI bridge to [bus 09]
[    0.180530] pci 0000:03:07.0:   bridge window [io  0xf000-0xffff]
[    0.180534] pci 0000:03:07.0:   bridge window [mem 0xfca00000-0xfcafffff]
[    0.180654] pci 0000:0a:00.0: [126f:2262] type 00 class 0x010802
[    0.180688] pci 0000:0a:00.0: reg 0x10: [mem 0xfce00000-0xfce03fff 64bit]
[    0.180951] pci 0000:00:01.3: PCI bridge to [bus 0a]
[    0.180958] pci 0000:00:01.3:   bridge window [mem 0xfce00000-0xfcefffff]
[    0.181076] pci 0000:0b:00.0: [1002:15dd] type 00 class 0x030000
[    0.181121] pci 0000:0b:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.181138] pci 0000:0b:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit pref]
[    0.181150] pci 0000:0b:00.0: reg 0x20: [io  0xe000-0xe0ff]
[    0.181161] pci 0000:0b:00.0: reg 0x24: [mem 0xfc900000-0xfc97ffff]
[    0.181181] pci 0000:0b:00.0: enabling Extended Tags
[    0.181196] pci 0000:0b:00.0: BAR 0: assigned to efifb
[    0.181296] pci 0000:0b:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.181425] pci 0000:0b:00.1: [1002:15de] type 00 class 0x040300
[    0.181454] pci 0000:0b:00.1: reg 0x10: [mem 0xfc988000-0xfc98bfff]
[    0.181526] pci 0000:0b:00.1: enabling Extended Tags
[    0.181597] pci 0000:0b:00.1: PME# supported from D1 D2 D3hot D3cold
[    0.181678] pci 0000:0b:00.2: [1022:15df] type 00 class 0x108000
[    0.181728] pci 0000:0b:00.2: reg 0x18: [mem 0xfc800000-0xfc8fffff]
[    0.181760] pci 0000:0b:00.2: reg 0x24: [mem 0xfc98c000-0xfc98dfff]
[    0.181780] pci 0000:0b:00.2: enabling Extended Tags
[    0.181948] pci 0000:0b:00.3: [1022:15e0] type 00 class 0x0c0330
[    0.181982] pci 0000:0b:00.3: reg 0x10: [mem 0xfc700000-0xfc7fffff 64bit]
[    0.182044] pci 0000:0b:00.3: enabling Extended Tags
[    0.182122] pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold
[    0.182216] pci 0000:0b:00.4: [1022:15e1] type 00 class 0x0c0330
[    0.182250] pci 0000:0b:00.4: reg 0x10: [mem 0xfc600000-0xfc6fffff 64bit]
[    0.182311] pci 0000:0b:00.4: enabling Extended Tags
[    0.182389] pci 0000:0b:00.4: PME# supported from D0 D3hot D3cold
[    0.182477] pci 0000:0b:00.6: [1022:15e3] type 00 class 0x040300
[    0.182506] pci 0000:0b:00.6: reg 0x10: [mem 0xfc980000-0xfc987fff]
[    0.182578] pci 0000:0b:00.6: enabling Extended Tags
[    0.182648] pci 0000:0b:00.6: PME# supported from D0 D3hot D3cold
[    0.182791] pci 0000:00:08.1: PCI bridge to [bus 0b]
[    0.182796] pci 0000:00:08.1:   bridge window [io  0xe000-0xefff]
[    0.182799] pci 0000:00:08.1:   bridge window [mem 0xfc600000-0xfc9fffff]
[    0.182804] pci 0000:00:08.1:   bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
[    0.182893] pci 0000:0c:00.0: [1022:7901] type 00 class 0x010601
[    0.182976] pci 0000:0c:00.0: reg 0x24: [mem 0xfcd00000-0xfcd007ff]
[    0.182995] pci 0000:0c:00.0: enabling Extended Tags
[    0.183074] pci 0000:0c:00.0: PME# supported from D3hot D3cold
[    0.183197] pci 0000:00:08.2: PCI bridge to [bus 0c]
[    0.183204] pci 0000:00:08.2:   bridge window [mem 0xfcd00000-0xfcdfffff]
[    0.183832] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
[    0.183893] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
[    0.183945] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
[    0.184014] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
[    0.184073] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[    0.184120] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[    0.184168] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[    0.184215] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[    0.184813] SCSI subsystem initialized
[    0.184813] libata version 3.00 loaded.
[    0.184813] pci 0000:0b:00.0: vgaarb: setting as boot VGA device
[    0.184813] pci 0000:0b:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.184813] pci 0000:0b:00.0: vgaarb: bridge control possible
[    0.184813] vgaarb: loaded
[    0.184813] ACPI: bus type USB registered
[    0.184813] usbcore: registered new interface driver usbfs
[    0.184813] usbcore: registered new interface driver hub
[    0.184813] usbcore: registered new device driver usb
[    0.184813] pps_core: LinuxPPS API ver. 1 registered
[    0.184813] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.184813] PTP clock support registered
[    0.184813] EDAC MC: Ver: 3.0.0
[    0.184813] Registered efivars operations
[    0.184813] PCI: Using ACPI for IRQ routing
[    0.185350] PCI: pci_cache_line_size set to 64 bytes
[    0.185467] Expanded resource Reserved due to conflict with PCI Bus 0000:00
[    0.185468] e820: reserve RAM buffer [mem 0x09e02000-0x0bffffff]
[    0.185470] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
[    0.185470] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
[    0.185471] e820: reserve RAM buffer [mem 0x5b5fe000-0x5bffffff]
[    0.185472] e820: reserve RAM buffer [mem 0x5b895000-0x5bffffff]
[    0.185472] e820: reserve RAM buffer [mem 0x5f000000-0x5fffffff]
[    0.185473] e820: reserve RAM buffer [mem 0x21f340000-0x21fffffff]
[    0.185620] NetLabel: Initializing
[    0.185621] NetLabel:  domain hash size = 128
[    0.185621] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.185635] NetLabel:  unlabeled traffic allowed by default
[    0.188102] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.188107] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.189059] clocksource: Switched to clocksource tsc-early
[    0.201136] VFS: Disk quotas dquot_6.6.0
[    0.201182] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.201234] *** VALIDATE hugetlbfs ***
[    0.201337] AppArmor: AppArmor Filesystem Enabled
[    0.201367] pnp: PnP ACPI init
[    0.201539] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.201543] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.201604] system 00:01: [mem 0x60000000-0xdfffffff window] has been reserved
[    0.201607] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.201773] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.201932] system 00:03: [io  0x0a00-0x0a2f] has been reserved
[    0.201934] system 00:03: [io  0x0a30-0x0a3f] has been reserved
[    0.201935] system 00:03: [io  0x0a40-0x0a4f] has been reserved
[    0.201937] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.202333] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.202335] system 00:04: [io  0x040b] has been reserved
[    0.202335] system 00:04: [io  0x04d6] has been reserved
[    0.202336] system 00:04: [io  0x0c00-0x0c01] has been reserved
[    0.202337] system 00:04: [io  0x0c14] has been reserved
[    0.202338] system 00:04: [io  0x0c50-0x0c51] has been reserved
[    0.202339] system 00:04: [io  0x0c52] has been reserved
[    0.202339] system 00:04: [io  0x0c6c] has been reserved
[    0.202340] system 00:04: [io  0x0c6f] has been reserved
[    0.202341] system 00:04: [io  0x0cd0-0x0cd1] has been reserved
[    0.202342] system 00:04: [io  0x0cd2-0x0cd3] has been reserved
[    0.202342] system 00:04: [io  0x0cd4-0x0cd5] has been reserved
[    0.202343] system 00:04: [io  0x0cd6-0x0cd7] has been reserved
[    0.202351] system 00:04: [io  0x0cd8-0x0cdf] has been reserved
[    0.202352] system 00:04: [io  0x0800-0x089f] has been reserved
[    0.202353] system 00:04: [io  0x0b00-0x0b0f] has been reserved
[    0.202354] system 00:04: [io  0x0b20-0x0b3f] has been reserved
[    0.202354] system 00:04: [io  0x0900-0x090f] has been reserved
[    0.202355] system 00:04: [io  0x0910-0x091f] has been reserved
[    0.202356] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.202357] system 00:04: [mem 0xfec01000-0xfec01fff] could not be reserved
[    0.202358] system 00:04: [mem 0xfedc0000-0xfedc0fff] has been reserved
[    0.202359] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.202360] system 00:04: [mem 0xfed80000-0xfed8ffff] could not be reserved
[    0.202361] system 00:04: [mem 0xfec10000-0xfec10fff] has been reserved
[    0.202362] system 00:04: [mem 0xff000000-0xffffffff] has been reserved
[    0.202364] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.202869] pnp: PnP ACPI: found 5 devices
[    0.204946] thermal_sys: Registered thermal governor 'fair_share'
[    0.204947] thermal_sys: Registered thermal governor 'bang_bang'
[    0.204948] thermal_sys: Registered thermal governor 'step_wise'
[    0.204948] thermal_sys: Registered thermal governor 'user_space'
[    0.204948] thermal_sys: Registered thermal governor 'power_allocator'
[    0.209514] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.209546] pci 0000:00:01.1: PCI bridge to [bus 01]
[    0.209552] pci 0000:00:01.1:   bridge window [mem 0xfcf00000-0xfcffffff]
[    0.209561] pci 0000:03:00.0: PCI bridge to [bus 04]
[    0.209573] pci 0000:03:01.0: PCI bridge to [bus 05]
[    0.209585] pci 0000:03:04.0: PCI bridge to [bus 06]
[    0.209597] pci 0000:03:05.0: PCI bridge to [bus 07]
[    0.209602] pci 0000:03:05.0:   bridge window [mem 0xfcb00000-0xfcbfffff]
[    0.209610] pci 0000:03:06.0: PCI bridge to [bus 08]
[    0.209622] pci 0000:03:07.0: PCI bridge to [bus 09]
[    0.209624] pci 0000:03:07.0:   bridge window [io  0xf000-0xffff]
[    0.209628] pci 0000:03:07.0:   bridge window [mem 0xfca00000-0xfcafffff]
[    0.209637] pci 0000:02:00.2: PCI bridge to [bus 03-09]
[    0.209639] pci 0000:02:00.2:   bridge window [io  0xf000-0xffff]
[    0.209643] pci 0000:02:00.2:   bridge window [mem 0xfca00000-0xfcbfffff]
[    0.209651] pci 0000:00:01.2: PCI bridge to [bus 02-09]
[    0.209652] pci 0000:00:01.2:   bridge window [io  0xf000-0xffff]
[    0.209657] pci 0000:00:01.2:   bridge window [mem 0xfca00000-0xfccfffff]
[    0.209665] pci 0000:00:01.3: PCI bridge to [bus 0a]
[    0.209669] pci 0000:00:01.3:   bridge window [mem 0xfce00000-0xfcefffff]
[    0.209677] pci 0000:00:08.1: PCI bridge to [bus 0b]
[    0.209684] pci 0000:00:08.1:   bridge window [io  0xe000-0xefff]
[    0.209688] pci 0000:00:08.1:   bridge window [mem 0xfc600000-0xfc9fffff]
[    0.209691] pci 0000:00:08.1:   bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
[    0.209697] pci 0000:00:08.2: PCI bridge to [bus 0c]
[    0.209701] pci 0000:00:08.2:   bridge window [mem 0xfcd00000-0xfcdfffff]
[    0.209710] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    0.209711] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    0.209712] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    0.209713] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.209713] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.209714] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.209715] pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec2ffff window]
[    0.209716] pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window]
[    0.209716] pci_bus 0000:01: resource 1 [mem 0xfcf00000-0xfcffffff]
[    0.209717] pci_bus 0000:02: resource 0 [io  0xf000-0xffff]
[    0.209718] pci_bus 0000:02: resource 1 [mem 0xfca00000-0xfccfffff]
[    0.209719] pci_bus 0000:03: resource 0 [io  0xf000-0xffff]
[    0.209719] pci_bus 0000:03: resource 1 [mem 0xfca00000-0xfcbfffff]
[    0.209720] pci_bus 0000:07: resource 1 [mem 0xfcb00000-0xfcbfffff]
[    0.209721] pci_bus 0000:09: resource 0 [io  0xf000-0xffff]
[    0.209722] pci_bus 0000:09: resource 1 [mem 0xfca00000-0xfcafffff]
[    0.209723] pci_bus 0000:0a: resource 1 [mem 0xfce00000-0xfcefffff]
[    0.209724] pci_bus 0000:0b: resource 0 [io  0xe000-0xefff]
[    0.209724] pci_bus 0000:0b: resource 1 [mem 0xfc600000-0xfc9fffff]
[    0.209725] pci_bus 0000:0b: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref]
[    0.209726] pci_bus 0000:0c: resource 1 [mem 0xfcd00000-0xfcdfffff]
[    0.209945] NET: Registered protocol family 2
[    0.210165] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.210218] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.210368] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.210439] TCP: Hash tables configured (established 65536 bind 65536)
[    0.210489] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.210509] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.210739] NET: Registered protocol family 1
[    0.210742] NET: Registered protocol family 44
[    0.210962] pci 0000:0b:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.210970] pci 0000:0b:00.1: D0 power state depends on 0000:0b:00.0
[    0.211251] PCI: CLS 64 bytes, default 64
[    0.211294] Trying to unpack rootfs image as initramfs...
[    0.301001] Freeing initrd memory: 46720K
[    0.301111] pci 0000:00:00.2: AMD-Vi: Unable to write to IOMMU perf counter.
[    0.301198] pci 0000:00:00.2: can't derive routing for PCI INT A
[    0.301199] pci 0000:00:00.2: PCI INT A: not connected
[    0.302009] pci 0000:00:01.0: Adding to iommu group 0
[    0.302058] pci 0000:00:01.0: Using iommu direct mapping
[    0.302086] pci 0000:00:01.1: Adding to iommu group 0
[    0.302106] pci 0000:00:01.2: Adding to iommu group 0
[    0.302126] pci 0000:00:01.3: Adding to iommu group 0
[    0.302356] pci 0000:00:08.0: Adding to iommu group 1
[    0.302401] pci 0000:00:08.0: Using iommu direct mapping
[    0.302428] pci 0000:00:08.1: Adding to iommu group 1
[    0.302454] pci 0000:00:08.2: Adding to iommu group 1
[    0.302666] pci 0000:00:14.0: Adding to iommu group 2
[    0.302712] pci 0000:00:14.0: Using iommu direct mapping
[    0.302735] pci 0000:00:14.3: Adding to iommu group 2
[    0.302961] pci 0000:00:18.0: Adding to iommu group 3
[    0.303006] pci 0000:00:18.0: Using iommu direct mapping
[    0.303029] pci 0000:00:18.1: Adding to iommu group 3
[    0.303051] pci 0000:00:18.2: Adding to iommu group 3
[    0.303065] pci 0000:00:18.3: Adding to iommu group 3
[    0.303080] pci 0000:00:18.4: Adding to iommu group 3
[    0.303096] pci 0000:00:18.5: Adding to iommu group 3
[    0.303111] pci 0000:00:18.6: Adding to iommu group 3
[    0.303126] pci 0000:00:18.7: Adding to iommu group 3
[    0.303149] pci 0000:01:00.0: Adding to iommu group 0
[    0.303167] pci 0000:02:00.0: Adding to iommu group 0
[    0.303189] pci 0000:02:00.1: Adding to iommu group 0
[    0.303204] pci 0000:02:00.2: Adding to iommu group 0
[    0.303219] pci 0000:03:00.0: Adding to iommu group 0
[    0.303235] pci 0000:03:01.0: Adding to iommu group 0
[    0.303250] pci 0000:03:04.0: Adding to iommu group 0
[    0.303274] pci 0000:03:05.0: Adding to iommu group 0
[    0.303289] pci 0000:03:06.0: Adding to iommu group 0
[    0.303312] pci 0000:03:07.0: Adding to iommu group 0
[    0.303332] pci 0000:07:00.0: Adding to iommu group 0
[    0.303355] pci 0000:09:00.0: Adding to iommu group 0
[    0.303374] pci 0000:0a:00.0: Adding to iommu group 0
[    0.303455] pci 0000:0b:00.0: Adding to iommu group 1
[    0.303491] pci 0000:0b:00.1: Adding to iommu group 1
[    0.303527] pci 0000:0b:00.2: Adding to iommu group 1
[    0.303563] pci 0000:0b:00.3: Adding to iommu group 1
[    0.303607] pci 0000:0b:00.4: Adding to iommu group 1
[    0.303642] pci 0000:0b:00.6: Adding to iommu group 1
[    0.303680] pci 0000:0c:00.0: Adding to iommu group 1
[    0.303886] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
[    0.303887] pci 0000:00:00.2: AMD-Vi: Extended features (0x4f77ef22294ada):
[    0.303887]  PPR NX GT IA GA PC GA_vAPIC
[    0.303889] AMD-Vi: Interrupt remapping enabled
[    0.303890] AMD-Vi: Virtual APIC enabled
[    0.304319] AMD-Vi: Lazy IO/TLB flushing enabled
[    0.304320] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.304321] software IO TLB: mapped [mem 0x534b8000-0x574b8000] (64MB)
[    0.304362] amd_uncore: AMD NB counters detected
[    0.304373] amd_uncore: AMD LLC counters detected
[    0.304595] check: Scanning for low memory corruption every 60 seconds
[    0.307021] Initialise system trusted keyrings
[    0.307069] Key type blacklist registered
[    0.307216] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[    0.309333] zbud: loaded
[    0.310182] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.310638] fuse: init (API version 7.31)
[    0.310973] Platform Keyring initialized
[    0.315638] Key type asymmetric registered
[    0.315639] Asymmetric key parser 'x509' registered
[    0.315649] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    0.315722] io scheduler mq-deadline registered
[    0.316739] pcieport 0000:00:01.1: PME: Signaling with IRQ 26
[    0.316889] pcieport 0000:00:01.2: PME: Signaling with IRQ 27
[    0.317040] pcieport 0000:00:01.3: PME: Signaling with IRQ 28
[    0.317180] pcieport 0000:00:08.1: PME: Signaling with IRQ 29
[    0.317418] pcieport 0000:00:08.2: PME: Signaling with IRQ 30
[    0.318594] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.318659] efifb: probing for efifb
[    0.318690] efifb: showing boot graphics
[    0.319932] efifb: framebuffer at 0xe0000000, using 3072k, total 3072k
[    0.319933] efifb: mode is 1024x768x32, linelength=4096, pages=1
[    0.319933] efifb: scrolling: redraw
[    0.319934] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.320010] fbcon: Deferring console take-over
[    0.320012] fb0: EFI VGA frame buffer device
[    0.320120] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.320132] ACPI: Power Button [PWRB]
[    0.320162] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.320175] ACPI: Power Button [PWRF]
[    0.320215] Monitor-Mwait will be used to enter C-1 state
[    1.308364] tsc: Refined TSC clocksource calibration: 3493.435 MHz
[    1.308387] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x325b17c40e7, max_idle_ns: 440795347064 ns
[    1.308427] clocksource: Switched to clocksource tsc
[    2.334156] ACPI: Invalid passive threshold
[    2.334450] thermal LNXTHERM:00: registered as thermal_zone0
[    2.334451] ACPI: Thermal Zone [TZ10] (17 C)
[    2.334914] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    2.336581] Linux agpgart interface v0.103
[    2.340801] loop: module loaded
[    2.341026] libphy: Fixed MDIO Bus: probed
[    2.341027] tun: Universal TUN/TAP device driver, 1.6
[    2.341082] PPP generic driver version 2.4.2
[    2.341155] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.341158] ehci-pci: EHCI PCI platform driver
[    2.341168] ehci-platform: EHCI generic platform driver
[    2.341173] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.341174] ohci-pci: OHCI PCI platform driver
[    2.341180] ohci-platform: OHCI generic platform driver
[    2.341183] uhci_hcd: USB Universal Host Controller Interface driver
[    2.341307] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    2.341312] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
[    2.396615] xhci_hcd 0000:02:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000000000410
[    2.396825] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
[    2.396826] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.396827] usb usb1: Product: xHCI Host Controller
[    2.396828] usb usb1: Manufacturer: Linux 5.3.0-29-generic xhci-hcd
[    2.396829] usb usb1: SerialNumber: 0000:02:00.0
[    2.396954] hub 1-0:1.0: USB hub found
[    2.396969] hub 1-0:1.0: 10 ports detected
[    2.397293] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    2.397295] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[    2.397297] xhci_hcd 0000:02:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[    2.397336] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.397349] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03
[    2.397350] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.397351] usb usb2: Product: xHCI Host Controller
[    2.397352] usb usb2: Manufacturer: Linux 5.3.0-29-generic xhci-hcd
[    2.397352] usb usb2: SerialNumber: 0000:02:00.0
[    2.397541] hub 2-0:1.0: USB hub found
[    2.397548] hub 2-0:1.0: 4 ports detected
[    2.397639] usb: port power management may be unreliable
[    2.397768] xhci_hcd 0000:0b:00.3: xHCI Host Controller
[    2.397771] xhci_hcd 0000:0b:00.3: new USB bus registered, assigned bus number 3
[    2.397954] xhci_hcd 0000:0b:00.3: hcc params 0x0270ffe5 hci version 0x110 quirks 0x0000000840000410
[    2.398337] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
[    2.398338] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.398339] usb usb3: Product: xHCI Host Controller
[    2.398340] usb usb3: Manufacturer: Linux 5.3.0-29-generic xhci-hcd
[    2.398340] usb usb3: SerialNumber: 0000:0b:00.3
[    2.398444] hub 3-0:1.0: USB hub found
[    2.398457] hub 3-0:1.0: 4 ports detected
[    2.398739] xhci_hcd 0000:0b:00.3: xHCI Host Controller
[    2.398749] xhci_hcd 0000:0b:00.3: new USB bus registered, assigned bus number 4
[    2.398750] xhci_hcd 0000:0b:00.3: Host supports USB 3.1 Enhanced SuperSpeed
[    2.398783] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.398825] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03
[    2.398825] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.398826] usb usb4: Product: xHCI Host Controller
[    2.398827] usb usb4: Manufacturer: Linux 5.3.0-29-generic xhci-hcd
[    2.398827] usb usb4: SerialNumber: 0000:0b:00.3
[    2.398926] hub 4-0:1.0: USB hub found
[    2.398948] hub 4-0:1.0: 4 ports detected
[    2.399387] xhci_hcd 0000:0b:00.4: xHCI Host Controller
[    2.399397] xhci_hcd 0000:0b:00.4: new USB bus registered, assigned bus number 5
[    2.399555] xhci_hcd 0000:0b:00.4: hcc params 0x0260ffe5 hci version 0x110 quirks 0x0000000840000410
[    2.399902] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
[    2.399903] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.399904] usb usb5: Product: xHCI Host Controller
[    2.399905] usb usb5: Manufacturer: Linux 5.3.0-29-generic xhci-hcd
[    2.399905] usb usb5: SerialNumber: 0000:0b:00.4
[    2.399975] hub 5-0:1.0: USB hub found
[    2.399984] hub 5-0:1.0: 1 port detected
[    2.400078] xhci_hcd 0000:0b:00.4: xHCI Host Controller
[    2.400080] xhci_hcd 0000:0b:00.4: new USB bus registered, assigned bus number 6
[    2.400081] xhci_hcd 0000:0b:00.4: Host supports USB 3.1 Enhanced SuperSpeed
[    2.400113] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.400126] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03
[    2.400127] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.400127] usb usb6: Product: xHCI Host Controller
[    2.400128] usb usb6: Manufacturer: Linux 5.3.0-29-generic xhci-hcd
[    2.400128] usb usb6: SerialNumber: 0000:0b:00.4
[    2.400227] hub 6-0:1.0: USB hub found
[    2.400236] hub 6-0:1.0: 1 port detected
[    2.400318] i8042: PNP: No PS/2 controller found.
[    2.400397] mousedev: PS/2 mouse device common for all mice
[    2.400522] rtc_cmos 00:02: RTC can wake from S4
[    2.400724] rtc_cmos 00:02: registered as rtc0
[    2.400740] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    2.400744] i2c /dev entries driver
[    2.400813] device-mapper: uevent: version 1.0.3
[    2.400897] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com
[    2.400917] platform eisa.0: Probing EISA bus 0
[    2.400918] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    2.400919] platform eisa.0: Cannot allocate resource for EISA slot 1
[    2.400920] platform eisa.0: Cannot allocate resource for EISA slot 2
[    2.400920] platform eisa.0: Cannot allocate resource for EISA slot 3
[    2.400921] platform eisa.0: Cannot allocate resource for EISA slot 4
[    2.400922] platform eisa.0: Cannot allocate resource for EISA slot 5
[    2.400922] platform eisa.0: Cannot allocate resource for EISA slot 6
[    2.400923] platform eisa.0: Cannot allocate resource for EISA slot 7
[    2.400924] platform eisa.0: Cannot allocate resource for EISA slot 8
[    2.400924] platform eisa.0: EISA: Detected 0 cards
[    2.401037] ledtrig-cpu: registered to indicate activity on CPUs
[    2.401039] EFI Variables Facility v0.08 2004-May-17
[    2.419598] NET: Registered protocol family 10
[    2.425391] Segment Routing with IPv6
[    2.425416] NET: Registered protocol family 17
[    2.425545] Key type dns_resolver registered
[    2.425950] RAS: Correctable Errors collector initialized.
[    2.425973] microcode: CPU0: patch_level=0x08101016
[    2.425977] microcode: CPU1: patch_level=0x08101016
[    2.425989] microcode: CPU2: patch_level=0x08101016
[    2.426010] microcode: CPU3: patch_level=0x08101016
[    2.426028] microcode: Microcode Update Driver: v2.2.
[    2.426049] sched_clock: Marking stable (2458020203, -31994810)->(2432534548, -6509155)
[    2.426161] registered taskstats version 1
[    2.426168] Loading compiled-in X.509 certificates
[    2.427639] Loaded X.509 cert 'Build time autogenerated kernel key: e010219b5d6ca0f28448e71ca03baad031d32c9b'
[    2.427661] zswap: loaded using pool lzo/zbud
[    2.432962] Key type big_key registered
[    2.435501] Key type encrypted registered
[    2.435503] AppArmor: AppArmor sha1 policy hashing enabled
[    2.438720] ima: No TPM chip found, activating TPM-bypass!
[    2.438737] ima: Allocated hash algorithm: sha1
[    2.438742] No architecture policies found
[    2.438749] evm: Initialising EVM extended attributes:
[    2.438749] evm: security.selinux
[    2.438749] evm: security.SMACK64
[    2.438750] evm: security.SMACK64EXEC
[    2.438750] evm: security.SMACK64TRANSMUTE
[    2.438750] evm: security.SMACK64MMAP
[    2.438751] evm: security.apparmor
[    2.438751] evm: security.ima
[    2.438751] evm: security.capability
[    2.438752] evm: HMAC attrs: 0x1
[    2.439754] PM:   Magic number: 4:614:446
[    2.439904] rtc_cmos 00:02: setting system clock to 2020-01-30T19:24:58 UTC (1580412298)
[    2.440041] acpi_cpufreq: overriding BIOS provided _PSD data
[    2.441553] Freeing unused decrypted memory: 2040K
[    2.441940] Freeing unused kernel image memory: 2668K
[    2.460034] Write protecting the kernel read-only data: 22528k
[    2.460907] Freeing unused kernel image memory: 2008K
[    2.461305] Freeing unused kernel image memory: 1416K
[    2.470371] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    2.470373] Run /init as init process
[    2.541119] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    2.541783] acpi device:02: registered as cooling_device4
[    2.541837] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input2
[    2.541927] ACPI: Video Device [VGA1] (multi-head: yes  rom: no  post: no)
[    2.542046] acpi device:10: registered as cooling_device5
[    2.542096] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0f/LNXVIDEO:01/input/input3
[    2.554903] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[    2.560004] ahci 0000:02:00.1: version 3.0
[    2.560220] ahci 0000:02:00.1: SSS flag set, parallel bus scan disabled
[    2.560268] ahci 0000:02:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x33 impl SATA mode
[    2.560270] ahci 0000:02:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst
[    2.561369] scsi host0: ahci
[    2.561586] scsi host1: ahci
[    2.561714] scsi host2: ahci
[    2.562235] scsi host3: ahci
[    2.562522] scsi host4: ahci
[    2.565073] scsi host5: ahci
[    2.566741] scsi host6: ahci
[    2.567254] nvme nvme0: pci function 0000:0a:00.0
[    2.572089] scsi host7: ahci
[    2.572195] ata1: SATA max UDMA/133 abar m131072@0xfcc80000 port 0xfcc80100 irq 55
[    2.572215] ata2: SATA max UDMA/133 abar m131072@0xfcc80000 port 0xfcc80180 irq 55
[    2.572216] ata3: DUMMY
[    2.572217] ata4: DUMMY
[    2.572234] ata5: SATA max UDMA/133 abar m131072@0xfcc80000 port 0xfcc80300 irq 55
[    2.572253] ata6: SATA max UDMA/133 abar m131072@0xfcc80000 port 0xfcc80380 irq 55
[    2.572254] ata7: DUMMY
[    2.572254] ata8: DUMMY
[    2.581244] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\GSA1.SMBI) (20190703/utaddress-204)
[    2.581250] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.582144] libphy: r8169: probed
[    2.582440] r8169 0000:09:00.0 eth0: RTL8168h/8111h, b4:2e:99:1b:46:7c, XID 541, IRQ 58
[    2.582442] r8169 0000:09:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    2.582973] ahci 0000:0c:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[    2.582975] ahci 0000:0c:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
[    2.592019] scsi host8: ahci
[    2.592139] ata9: SATA max UDMA/133 abar m2048@0xfcd00000 port 0xfcd00100 irq 60
[    2.624185] r8169 0000:09:00.0 enp9s0: renamed from eth0
[    2.740026] usb 3-2: new high-speed USB device number 2 using xhci_hcd
[    2.740043] usb 1-5: new low-speed USB device number 2 using xhci_hcd
[    2.780372] nvme nvme0: missing or invalid SUBNQN field.
[    2.782308] nvme nvme0: 15/0/0 default/read/poll queues
[    2.784287]  nvme0n1: p1 p2 p3 p4 p5 p6 p7 p8
[    2.903637] usb 3-2: New USB device found, idVendor=1d19, idProduct=1101, bcdDevice= 1.00
[    2.903639] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.903640] usb 3-2: Product: Rtl2832UDVB
[    2.903641] usb 3-2: Manufacturer: Realtek
[    2.903642] usb 3-2: SerialNumber: 0
[    2.907166] ata9: SATA link down (SStatus 0 SControl 300)
[    3.005667] usb 1-5: New USB device found, idVendor=046e, idProduct=557f, bcdDevice= 0.50
[    3.005669] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.005671] usb 1-5: Product: USB Multimedia Cordless Kit
[    3.005672] usb 1-5: Manufacturer: BTC
[    3.052069] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.056597] ata1.00: ATA-8: WDC WD15EADS-00R6B0, 01.00A01, max UDMA/133
[    3.056601] ata1.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    3.061064] ata1.00: configured for UDMA/133
[    3.061396] scsi 0:0:0:0: Direct-Access     ATA      WDC WD15EADS-00R 0A01 PQ: 0 ANSI: 5
[    3.061759] sd 0:0:0:0: [sda] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[    3.061775] sd 0:0:0:0: [sda] Write Protect is off
[    3.061778] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.061801] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.061903] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    3.066148]  sda: sda1
[    3.066595] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.140362] usb 1-6: new full-speed USB device number 3 using xhci_hcd
[    3.372813] ata2: SATA link down (SStatus 0 SControl 300)
[    3.472332] usb 1-6: New USB device found, idVendor=1934, idProduct=5168, bcdDevice= 0.01
[    3.472335] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.472338] usb 1-6: Product: eHome Infrared Transceiver
[    3.472340] usb 1-6: Manufacturer: FINTEK
[    3.472341] usb 1-6: SerialNumber: 88636562727801
[    3.608048] usb 1-7: new high-speed USB device number 4 using xhci_hcd
[    3.686381] ata5: SATA link down (SStatus 0 SControl 330)
[    3.779805] usb 1-7: New USB device found, idVendor=1f4d, idProduct=3000, bcdDevice= 0.00
[    3.779809] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.779811] usb 1-7: Product: USB Stick
[    3.779813] usb 1-7: Manufacturer: Max
[    3.779814] usb 1-7: SerialNumber: 080116
[    3.924323] usb 1-8: new high-speed USB device number 5 using xhci_hcd
[    3.999577] ata6: SATA link down (SStatus 0 SControl 330)
[    4.204812] usb 1-8: New USB device found, idVendor=15f4, idProduct=0135, bcdDevice=40.01
[    4.204814] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.204816] usb 1-8: Product: T2hybrid
[    4.204817] usb 1-8: Manufacturer: Astrometa
[    4.271375] hidraw: raw HID events driver (C) Jiri Kosina
[    4.308092] usbcore: registered new interface driver usbhid
[    4.308093] usbhid: USB HID core driver
[    4.310554] input: BTC USB Multimedia Cordless Kit as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-5/1-5:1.0/0003:046E:557F.0001/input/input4
[    4.368619] hid-generic 0003:046E:557F.0001: input,hidraw0: USB HID v1.11 Keyboard [BTC USB Multimedia Cordless Kit] on usb-0000:02:00.0-5/input0
[    4.369072] input: BTC USB Multimedia Cordless Kit System Control as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-5/1-5:1.1/0003:046E:557F.0002/input/input5
[    4.428638] input: BTC USB Multimedia Cordless Kit Consumer Control as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-5/1-5:1.1/0003:046E:557F.0002/input/input6
[    4.428751] input: BTC USB Multimedia Cordless Kit Mouse as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-5/1-5:1.1/0003:046E:557F.0002/input/input8
[    4.428974] hid-generic 0003:046E:557F.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [BTC USB Multimedia Cordless Kit] on usb-0000:02:00.0-5/input1
[    4.471577] fbcon: Taking over console
[    4.471660] Console: switching to colour frame buffer device 128x48
[    4.475206] EXT4-fs (nvme0n1p6): mounted filesystem with ordered data mode. Opts: (null)
[    4.546029] systemd[1]: Inserted module 'autofs4'
[    4.589088] systemd[1]: systemd 242 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    4.608061] systemd[1]: Detected architecture x86-64.
[    4.611995] systemd[1]: Set hostname to <gio-B450M-S2H>.
[    4.612432] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument
[    4.663468] systemd[1]: /lib/systemd/system/dbus.socket:4: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
[    4.671269] systemd[1]: /lib/systemd/system/tvheadend.service:7: PIDFile= references a path below legacy directory /var/run/, updating /var/run/tvheadend.pid → /run/tvheadend.pid; please update the unit file accordingly.
[    4.671617] systemd[1]: /etc/systemd/system/teamviewerd.service:8: PIDFile= references a path below legacy directory /var/run/, updating /var/run/teamviewerd.pid → /run/teamviewerd.pid; please update the unit file accordingly.
[    4.686185] systemd[1]: /lib/systemd/system/smbd.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/samba/smbd.pid → /run/samba/smbd.pid; please update the unit file accordingly.
[    4.688162] systemd[1]: /lib/systemd/system/nmbd.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/samba/nmbd.pid → /run/samba/nmbd.pid; please update the unit file accordingly.
[    4.706021] systemd[1]: Listening on udev Control Socket.
[    4.723491] EXT4-fs (nvme0n1p6): re-mounted. Opts: errors=remount-ro
[    4.727442] lp: driver loaded but no devices found
[    4.730424] ppdev: user-space parallel port driver
[    4.987220] systemd-journald[360]: Received request to flush runtime journal from PID 1
[    5.033105] rc_core: loading out-of-tree module taints kernel.
[    5.033134] rc_core: module verification failed: signature and/or required key missing - tainting kernel
[    5.033482] WARNING: You are using an experimental version of the media stack.
               	As the driver is backported to an older kernel, it doesn't offer
               	enough quality for its usage in production.
               	Use it with care.
               Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):

[    5.038476] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    5.060539] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    5.070124] mc: Linux media interface: v0.10
[    5.076193] videodev: Linux video capture interface: v2.00
[    5.076194] WARNING: You are using an experimental version of the media stack.
               	As the driver is backported to an older kernel, it doesn't offer
               	enough quality for its usage in production.
               	Use it with care.
               Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):

[    5.079883] Intel(R) Wireless WiFi driver for Linux
[    5.079884] Copyright(c) 2003- 2015 Intel Corporation
[    5.079953] iwlwifi 0000:07:00.0: enabling device (0000 -> 0002)
[    5.082737] WARNING: You are using an experimental version of the media stack.
               	As the driver is backported to an older kernel, it doesn't offer
               	enough quality for its usage in production.
               	Use it with care.
               Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):

[    5.085417] iwlwifi 0000:07:00.0: Found debug destination: EXTERNAL_DRAM
[    5.085418] iwlwifi 0000:07:00.0: Found debug configuration: 0
[    5.085775] iwlwifi 0000:07:00.0: loaded firmware version 46.93e59cf4.0 op_mode iwlmvm
[    5.087241] dw2102: su3000_identify_state
[    5.087242] dvb-usb: found a 'SU3000HD DVB-S USB2.0' in warm state.
[    5.087247] dw2102: su3000_power_ctrl: 1, initialized 0
[    5.087369] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[    5.094421] dvbdev: DVB: registering new adapter (SU3000HD DVB-S USB2.0)
[    5.094425] usb 1-7: media controller created
[    5.096020] Registered IR keymap rc-rc6-mce
[    5.100146] dvb-usb: MAC address: 00:af:78:66:2c:81
[    5.100605] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
[    5.108861] IR RC6 protocol handler initialized
[    5.112462] usb 3-2: dvb_usb_v2: found a 'Dexatek DK DVB-T Dongle' in warm state
[    5.149955] usb 3-2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[    5.149960] dvbdev: DVB: registering new adapter (Dexatek DK DVB-T Dongle)
[    5.149962] usb 3-2: media controller created
[    5.150219] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
[    5.150419] iwlwifi 0000:07:00.0: Detected Intel(R) Wireless-AC 9260 160MHz, REV=0x324
[    5.157843] iwlwifi 0000:07:00.0: Applying debug destination EXTERNAL_DRAM
[    5.158812] iwlwifi 0000:07:00.0: Allocated 0x00400000 bytes for firmware monitor.
[    5.161188] cryptd: max_cpu_qlen set to 1000
[    5.162907] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    5.163912] i2c i2c-1: Added multiplexed i2c bus 2
[    5.163913] rtl2832 1-0010: Realtek RTL2832 successfully attached
[    5.163924] usb 3-2: DVB: registering adapter 1 frontend 0 (Realtek RTL2832 (DVB-T))...
[    5.163927] dvbdev: dvb_create_media_entity: media entity 'Realtek RTL2832 (DVB-T)' registered.
[    5.176682] rc rc0: Media Center Ed. eHome Infrared Remote Transceiver (1934:5168) as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-6/1-6:1.0/rc/rc0
[    5.178010] rc rc0: lirc_dev: driver mceusb registered at minor = 0, raw IR receiver, raw IR transmitter
[    5.178056] input: Media Center Ed. eHome Infrared Remote Transceiver (1934:5168) as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-6/1-6:1.0/rc/rc0/input9
[    5.183564] i2c i2c-2: fc0012: Fitipower FC0012 successfully identified
[    5.207222] iwlwifi 0000:07:00.0: base HW address: d4:3b:04:d9:79:7f
[    5.213283] AVX2 version of gcm_enc/dec engaged.
[    5.213284] AES CTR mode by8 optimization enabled
[    5.216211] rtl2832_sdr rtl2832_sdr.0.auto: Registered as swradio0
[    5.216213] rtl2832_sdr rtl2832_sdr.0.auto: Realtek RTL2832 SDR attached
[    5.216213] rtl2832_sdr rtl2832_sdr.0.auto: SDR API is still slightly experimental and functionality changes may follow
[    5.222850] [drm] amdgpu kernel modesetting enabled.
[    5.222939] Parsing CRAT table with 1 nodes
[    5.222942] Creating topology SYSFS entries
[    5.222972] Topology: Add APU node [0x0:0x0]
[    5.222973] Finished initializing topology
[    5.223029] amdgpu 0000:0b:00.0: remove_conflicting_pci_framebuffers: bar 0: 0xe0000000 -> 0xefffffff
[    5.223030] amdgpu 0000:0b:00.0: remove_conflicting_pci_framebuffers: bar 2: 0xf0000000 -> 0xf01fffff
[    5.223031] amdgpu 0000:0b:00.0: remove_conflicting_pci_framebuffers: bar 5: 0xfc900000 -> 0xfc97ffff
[    5.223033] checking generic (e0000000 300000) vs hw (e0000000 10000000)
[    5.223033] fb0: switching to amdgpudrmfb from EFI VGA
[    5.223078] Console: switching to colour dummy device 80x25
[    5.223105] amdgpu 0000:0b:00.0: vgaarb: deactivate vga console
[    5.223881] [drm] initializing kernel modesetting (RAVEN 0x1002:0x15DD 0x1002:0x15DD 0xC8).
[    5.223896] [drm] register mmio base: 0xFC900000
[    5.223896] [drm] register mmio size: 524288
[    5.223917] [drm] add ip block number 0 <soc15_common>
[    5.223918] [drm] add ip block number 1 <gmc_v9_0>
[    5.223918] [drm] add ip block number 2 <vega10_ih>
[    5.223919] [drm] add ip block number 3 <psp>
[    5.223919] [drm] add ip block number 4 <gfx_v9_0>
[    5.223920] [drm] add ip block number 5 <sdma_v4_0>
[    5.223921] [drm] add ip block number 6 <powerplay>
[    5.223921] [drm] add ip block number 7 <dm>
[    5.223922] [drm] add ip block number 8 <vcn_v1_0>
[    5.228030] Registered IR keymap rc-empty
[    5.228053] rc rc1: Dexatek DK DVB-T Dongle as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb3/3-2/rc/rc1
[    5.236050] rc rc1: lirc_dev: driver dvb_usb_rtl28xxu registered at minor = 1, raw IR receiver, no transmitter
[    5.236080] input: Dexatek DK DVB-T Dongle as /devices/pci0000:00/0000:00:08.1/0000:0b:00.3/usb3/3-2/rc/rc1/input10
[    5.264779] [drm] BIOS signature incorrect 0 0
[    5.264807] ATOM BIOS: 113-RAVEN-114
[    5.265083] [drm] VCN decode is enabled in VM mode
[    5.265083] [drm] VCN encode is enabled in VM mode
[    5.265083] [drm] VCN jpeg decode is enabled in VM mode
[    5.265119] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
[    5.265126] amdgpu 0000:0b:00.0: VRAM: 2048M 0x000000F400000000 - 0x000000F47FFFFFFF (2048M used)
[    5.265127] amdgpu 0000:0b:00.0: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF
[    5.265128] amdgpu 0000:0b:00.0: AGP: 267419648M 0x000000F800000000 - 0x0000FFFFFFFFFFFF
[    5.265131] [drm] Detected VRAM RAM=2048M, BAR=2048M
[    5.265132] [drm] RAM width 128bits DDR4
[    5.266759] usb 3-2: dvb_usb_v2: schedule remote query interval to 200 msecs
[    5.267930] [TTM] Zone  kernel: Available graphics memory: 3015022 KiB
[    5.267931] [TTM] Zone   dma32: Available graphics memory: 2097152 KiB
[    5.267931] [TTM] Initializing pool allocator
[    5.267934] [TTM] Initializing DMA pool allocator
[    5.268428] [drm] amdgpu: 2048M of VRAM memory ready
[    5.268432] [drm] amdgpu: 3072M of GTT memory ready.
[    5.268442] [drm] GART: num cpu pages 262144, num gpu pages 262144
[    5.268617] [drm] PCIE GART of 1024M enabled (table at 0x000000F400900000).
[    5.275351] usb 3-2: dvb_usb_v2: 'Dexatek DK DVB-T Dongle' successfully initialized and connected
[    5.275396] usbcore: registered new interface driver dvb_usb_rtl28xxu
[    5.276348] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[    5.276624] thermal thermal_zone1: failed to read out thermal zone (-61)
[    5.292247] [drm] use_doorbell being set to: [true]
[    5.300638] amdgpu: [powerplay] hwmgr_sw_init smu backed is smu10_smu
[    5.301681] [drm] Found VCN firmware Version ENC: 1.9 DEC: 1 VEP: 0 Revision: 28
[    5.301690] [drm] PSP loading VCN firmware
[    5.337303] mceusb 1-6:1.0: long-range (0x1) receiver active
[    5.337713] [drm] reserve 0x400000 from 0xf400c00000 for PSP TMR
[    5.376029] mceusb 1-6:1.0: Registered FINTEK eHome Infrared Transceiver with mce emulator interface version 2
[    5.376030] mceusb 1-6:1.0: 0 tx ports (0x0 cabled) and 2 rx sensors (0x1 active)
[    5.382058] snd_hda_intel 0000:0b:00.1: Handle vga_switcheroo audio client
[    5.391623] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.1/0000:0b:00.1/sound/card0/input12
[    5.391690] input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:08.1/0000:0b:00.1/sound/card0/input13
[    5.391730] input: HD-Audio Generic HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:08.1/0000:0b:00.1/sound/card0/input14
[    5.392458] iwlwifi 0000:07:00.0 wlp7s0: renamed from wlan0
[    5.403505] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[    5.403506] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    5.403507] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    5.403508] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[    5.403509] snd_hda_codec_realtek hdaudioC1D0:    dig-out=0x11/0x0
[    5.403509] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[    5.403510] snd_hda_codec_realtek hdaudioC1D0:      Front Mic=0x19
[    5.403511] snd_hda_codec_realtek hdaudioC1D0:      Rear Mic=0x18
[    5.403512] snd_hda_codec_realtek hdaudioC1D0:      Line=0x1a
[    5.416166] Registered IR keymap rc-astrometa-t2hybrid
[    5.442692] IR NEC protocol handler initialized
[    5.445662] Invalid probe, probably not a DS3000
[    5.445670] dw2102: su3000_frontend_attach: attaching demodulator of type m88ds3103 at i2c address 0x68
[    5.447611] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:0b:00.6/sound/card1/input15
[    5.447662] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:0b:00.6/sound/card1/input16
[    5.447707] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:0b:00.6/sound/card1/input17
[    5.447744] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:08.1/0000:0b:00.6/sound/card1/input18
[    5.447792] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:0b:00.6/sound/card1/input19
[    5.450299] kvm: disabled by bios
[    5.461262] i2c i2c-0: Added multiplexed i2c bus 3
[    5.497447] kvm: disabled by bios
[    5.497817] MCE: In-kernel MCE decoding enabled.
[    5.512491] EDAC amd64: Node 0: DRAM ECC disabled.
[    5.512493] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[    5.516049] rc rc2: Astrometa T2Hybrid (15f4:0135) as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-8/1-8:1.0/rc/rc2
[    5.516081] rc rc2: lirc_dev: driver mceusb registered at minor = 2, raw IR receiver, no transmitter
[    5.516109] input: Astrometa T2Hybrid (15f4:0135) as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-8/1-8:1.0/rc/rc2/input11
[    5.527904] [drm] DM_PPLIB: values for F clock
[    5.527905] [drm] DM_PPLIB:	 0 in kHz, 3649 in mV
[    5.527906] [drm] DM_PPLIB:	 400000 in kHz, 3649 in mV
[    5.527906] [drm] DM_PPLIB:	 933000 in kHz, 4074 in mV
[    5.527906] [drm] DM_PPLIB:	 1067000 in kHz, 4250 in mV
[    5.527907] ------------[ cut here ]------------
[    5.528004] WARNING: CPU: 2 PID: 457 at drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dcn_calcs.c:1452 dcn_bw_update_from_pplib.cold+0x7f/0xa8 [amdgpu]
[    5.528004] Modules linked in: fjes(-) amd64_edac_mod(-) edac_mce_amd ts2020(OE) m88ds3103(OE) ccp ds3000(OE) ir_nec_decoder(OE) kvm snd_hda_codec_realtek snd_hda_codec_generic irqbypass ledtrig_audio snd_hda_codec_hdmi rc_astrometa_t2hybrid(OE) snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep crct10dif_pclmul snd_pcm crc32_pclmul snd_seq_midi ghash_clmulni_intel snd_seq_midi_event snd_rawmidi snd_seq rtl2832_sdr(OE) amdgpu(+) videobuf2_v4l2(OE) snd_seq_device aesni_intel fc0012(OE) snd_timer aes_x86_64 rtl2832(OE) amd_iommu_v2 crypto_simd gpu_sched i2c_mux cryptd ttm glue_helper drm_kms_helper snd iwlmvm drm wmi_bmof mac80211 i2c_algo_bit fb_sys_fops syscopyarea dvb_usb_rtl28xxu(OE) sysfillrect k10temp dvb_usb_v2(OE) ir_rc6_decoder(OE) sysimgblt libarc4 soundcore dvb_usb_dw2102(OE+) dvb_usb(OE) dvb_core(OE) videobuf2_vmalloc(OE) videobuf2_memops(OE) iwlwifi videobuf2_common(OE) videodev(OE) mc(OE) joydev rc_rc6_mce(OE) cfg80211 mceusb(OE+) rc_core(OE) mac_hid sch_fq_codel parport_pc
[    5.528030]  ppdev lp parport ip_tables x_tables autofs4 hid_generic usbhid hid i2c_piix4 nvme nvme_core r8169 realtek ahci libahci wmi video gpio_amdpt gpio_generic
[    5.528039] CPU: 2 PID: 457 Comm: systemd-udevd Tainted: G           OE     5.3.0-29-generic #31-Ubuntu
[    5.528039] Hardware name: Gigabyte Technology Co., Ltd. B450M S2H/B450M S2H, BIOS F50a 11/08/2019
[    5.528109] RIP: 0010:dcn_bw_update_from_pplib.cold+0x7f/0xa8 [amdgpu]
[    5.528111] Code: 48 8b 93 60 03 00 00 db 42 78 83 f9 02 77 37 b8 02 00 00 00 8d 71 ff e9 59 bb f3 ff 48 c7 c7 58 f5 d8 c0 31 c0 e8 ea 86 a3 f1 <0f> 0b e9 f4 bb f3 ff 48 c7 c7 58 f5 d8 c0 31 c0 e8 d5 86 a3 f1 0f
[    5.528111] RSP: 0018:ffffb1f240d93598 EFLAGS: 00010246
[    5.528113] RAX: 0000000000000024 RBX: ffff974cd3870000 RCX: 0000000000000006
[    5.528113] RDX: 0000000000000000 RSI: 0000000000000092 RDI: ffff974cd8697440
[    5.528114] RBP: ffffb1f240d936e8 R08: 000000000000041c R09: 0000000000000004
[    5.528114] R10: 0000000000000000 R11: 0000000000000001 R12: ffffb1f240d93638
[    5.528115] R13: ffff974cd07f0680 R14: 0000000000000001 R15: ffff974ccddbad80
[    5.528116] FS:  00007f00243e8880(0000) GS:ffff974cd8680000(0000) knlGS:0000000000000000
[    5.528117] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    5.528117] CR2: 00005633b2a401b0 CR3: 0000000215a64000 CR4: 00000000003406e0
[    5.528118] Call Trace:
[    5.528191]  construct+0x994/0xa50 [amdgpu]
[    5.528194]  ? _cond_resched+0x19/0x30
[    5.528197]  ? kmem_cache_alloc_trace+0x163/0x230
[    5.528264]  dcn10_create_resource_pool+0x41/0x60 [amdgpu]
[    5.528329]  dc_create_resource_pool+0x1b0/0x1d0 [amdgpu]
[    5.528397]  ? dal_gpio_service_create+0x9f/0xe0 [amdgpu]
[    5.528460]  construct+0x223/0x5b0 [amdgpu]
[    5.528463]  ? kmalloc_order_trace+0x24/0xa0
[    5.528526]  dc_create+0x3b/0x100 [amdgpu]
[    5.528592]  amdgpu_dm_init+0x129/0x1a0 [amdgpu]
[    5.528657]  dm_hw_init+0x13/0x30 [amdgpu]
[    5.528724]  amdgpu_device_ip_init+0x345/0x3df [amdgpu]
[    5.528790]  amdgpu_device_init.cold+0x7e0/0xbb4 [amdgpu]
[    5.528837]  amdgpu_driver_load_kms+0x5f/0x1e0 [amdgpu]
[    5.528846]  drm_dev_register+0x12f/0x170 [drm]
[    5.528891]  amdgpu_pci_probe+0xf7/0x160 [amdgpu]
[    5.528894]  ? __pm_runtime_resume+0x60/0x80
[    5.528896]  local_pci_probe+0x48/0x80
[    5.528898]  pci_device_probe+0x10f/0x1b0
[    5.528900]  really_probe+0xfb/0x3a0
[    5.528901]  driver_probe_device+0x5f/0xe0
[    5.528903]  device_driver_attach+0x5d/0x70
[    5.528904]  __driver_attach+0x8f/0x150
[    5.528905]  ? device_driver_attach+0x70/0x70
[    5.528907]  bus_for_each_dev+0x7e/0xc0
[    5.528908]  driver_attach+0x1e/0x20
[    5.528909]  bus_add_driver+0x14f/0x1f0
[    5.528911]  driver_register+0x74/0xc0
[    5.528912]  __pci_register_driver+0x57/0x60
[    5.528962]  amdgpu_init+0x83/0x8d [amdgpu]
[    5.528963]  ? 0xffffffffc0e83000
[    5.528965]  do_one_initcall+0x4a/0x1fa
[    5.528966]  ? _cond_resched+0x19/0x30
[    5.528968]  ? kmem_cache_alloc_trace+0x163/0x230
[    5.528970]  do_init_module+0x62/0x250
[    5.528971]  load_module+0x10d4/0x1220
[    5.528974]  __do_sys_finit_module+0xbe/0x120
[    5.528975]  ? __do_sys_finit_module+0xbe/0x120
[    5.528977]  __x64_sys_finit_module+0x1a/0x20
[    5.528978]  do_syscall_64+0x5a/0x130
[    5.528980]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[    5.528981] RIP: 0033:0x7f002495b94d
[    5.528982] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 13 e5 0c 00 f7 d8 64 89 01 48
[    5.528983] RSP: 002b:00007ffdabdf7a58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[    5.528984] RAX: ffffffffffffffda RBX: 00005633b2a35170 RCX: 00007f002495b94d
[    5.528985] RDX: 0000000000000000 RSI: 00007f0024838cad RDI: 0000000000000017
[    5.528985] RBP: 00007f0024838cad R08: 0000000000000000 R09: 00005633b2a35170
[    5.528986] R10: 0000000000000017 R11: 0000000000000246 R12: 0000000000000000
[    5.528986] R13: 00005633b2a8fc60 R14: 0000000000020000 R15: 00005633b2a35170
[    5.528988] ---[ end trace 52ecab2ff3f138f3 ]---
[    5.528998] [drm] DM_PPLIB: values for DCF clock
[    5.528998] [drm] DM_PPLIB:	 300000 in kHz, 3649 in mV
[    5.528999] [drm] DM_PPLIB:	 600000 in kHz, 4074 in mV
[    5.528999] [drm] DM_PPLIB:	 626000 in kHz, 4250 in mV
[    5.528999] [drm] DM_PPLIB:	 654000 in kHz, 4399 in mV
[    5.551333] ts2020 3-0060: Montage Technology TS2022 successfully identified
[    5.551366] usb 1-7: DVB: registering adapter 0 frontend 0 (Montage Technology M88DS3103)...
[    5.551372] dvbdev: dvb_create_media_entity: media entity 'Montage Technology M88DS3103' registered.
[    5.562755] kvm: disabled by bios
[    5.564138] [drm] Display Core initialized with v3.2.35!
[    5.589887] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    5.589887] [drm] Driver supports precise vblank timestamp query.
[    5.607482] [drm] VCN decode and encode initialized successfully(under SPG Mode).
[    5.608769] kfd kfd: Allocated 3969056 bytes on gart
[    5.610013] Topology: Add APU node [0x15dd:0x1002]
[    5.610017] kfd kfd: added device 1002:15dd
[    5.612803] [drm] fb mappable at 0x61000000
[    5.612804] [drm] vram apper at 0x60000000
[    5.612804] [drm] size 8294400
[    5.612804] [drm] fb depth is 24
[    5.612805] [drm]    pitch is 7680
[    5.612880] fbcon: amdgpudrmfb (fb0) is primary device
[    5.612966] Console: switching to colour frame buffer device 240x67
[    5.612986] amdgpu 0000:0b:00.0: fb0: amdgpudrmfb frame buffer device
[    5.628178] amdgpu 0000:0b:00.0: ring gfx uses VM inv eng 0 on hub 0
[    5.628180] amdgpu 0000:0b:00.0: ring comp_1.0.0 uses VM inv eng 1 on hub 0
[    5.628181] amdgpu 0000:0b:00.0: ring comp_1.1.0 uses VM inv eng 4 on hub 0
[    5.628182] amdgpu 0000:0b:00.0: ring comp_1.2.0 uses VM inv eng 5 on hub 0
[    5.628183] amdgpu 0000:0b:00.0: ring comp_1.3.0 uses VM inv eng 6 on hub 0
[    5.628184] amdgpu 0000:0b:00.0: ring comp_1.0.1 uses VM inv eng 7 on hub 0
[    5.628184] amdgpu 0000:0b:00.0: ring comp_1.1.1 uses VM inv eng 8 on hub 0
[    5.628185] amdgpu 0000:0b:00.0: ring comp_1.2.1 uses VM inv eng 9 on hub 0
[    5.628186] amdgpu 0000:0b:00.0: ring comp_1.3.1 uses VM inv eng 10 on hub 0
[    5.628187] amdgpu 0000:0b:00.0: ring kiq_2.1.0 uses VM inv eng 11 on hub 0
[    5.628188] amdgpu 0000:0b:00.0: ring sdma0 uses VM inv eng 0 on hub 1
[    5.628189] amdgpu 0000:0b:00.0: ring vcn_dec uses VM inv eng 1 on hub 1
[    5.628190] amdgpu 0000:0b:00.0: ring vcn_enc0 uses VM inv eng 4 on hub 1
[    5.628190] amdgpu 0000:0b:00.0: ring vcn_enc1 uses VM inv eng 5 on hub 1
[    5.628191] amdgpu 0000:0b:00.0: ring vcn_jpeg uses VM inv eng 6 on hub 1
[    5.635990] EDAC amd64: Node 0: DRAM ECC disabled.
[    5.635991] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[    5.636055] kvm: disabled by bios
[    5.643653] [drm] Initialized amdgpu 3.33.0 20150101 for 0000:0b:00.0 on minor 0
[    5.660473] Registered IR keymap rc-su3000
[    5.660519] rc rc3: SU3000HD DVB-S USB2.0 as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-7/rc/rc3
[    5.660860] rc rc3: lirc_dev: driver dw2102 registered at minor = 3, scancode receiver, no transmitter
[    5.660895] input: SU3000HD DVB-S USB2.0 as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-7/rc/rc3/input20
[    5.660939] dvb-usb: schedule remote query interval to 150 msecs.
[    5.660941] dw2102: su3000_power_ctrl: 0, initialized 1
[    5.660941] dvb-usb: SU3000HD DVB-S USB2.0 successfully initialized and connected.
[    5.660969] usbcore: registered new interface driver dw2102
[    5.684500] EDAC amd64: Node 0: DRAM ECC disabled.
[    5.684501] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[    5.704077] Adding 5510140k swap on /dev/nvme0n1p8.  Priority:-2 extents:1 across:5510140k SSFS
[    5.720295] mceusb 1-8:1.0: long-range (0x1) receiver active
[    5.744532] EDAC amd64: Node 0: DRAM ECC disabled.
[    5.744534] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[    5.763751] EXT4-fs (nvme0n1p7): mounted filesystem with ordered data mode. Opts: (null)
[    5.784135] mceusb 1-8:1.0: Registered Astrometa T2hybrid with mce emulator interface version 1
[    5.784137] mceusb 1-8:1.0: 2 tx ports (0x3 cabled) and 2 rx sensors (0x1 active)
[    5.784213] usbcore: registered new interface driver mceusb
[    5.801537] v4l2_common: exports duplicate symbol v4l2_ctrl_query_fill (owned by videodev)
[    5.836225] v4l2_common: exports duplicate symbol v4l2_ctrl_query_fill (owned by videodev)
[    5.880212] v4l2_common: exports duplicate symbol v4l2_ctrl_query_fill (owned by videodev)
[    5.912139] v4l2_common: exports duplicate symbol v4l2_ctrl_query_fill (owned by videodev)
[    5.952132] v4l2_common: exports duplicate symbol v4l2_ctrl_query_fill (owned by videodev)
[    5.992123] v4l2_common: exports duplicate symbol v4l2_ctrl_query_fill (owned by videodev)
[    6.028129] v4l2_common: exports duplicate symbol v4l2_ctrl_query_fill (owned by videodev)
[    6.189528] audit: type=1400 audit(1580412302.247:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=833 comm="apparmor_parser"
[    6.197006] audit: type=1400 audit(1580412302.255:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=834 comm="apparmor_parser"
[    6.197008] audit: type=1400 audit(1580412302.255:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=834 comm="apparmor_parser"
[    6.197010] audit: type=1400 audit(1580412302.255:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=834 comm="apparmor_parser"
[    6.197011] audit: type=1400 audit(1580412302.255:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=834 comm="apparmor_parser"
[    6.197426] audit: type=1400 audit(1580412302.255:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=836 comm="apparmor_parser"
[    6.197428] audit: type=1400 audit(1580412302.255:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=836 comm="apparmor_parser"
[    6.197717] audit: type=1400 audit(1580412302.255:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=835 comm="apparmor_parser"
[    6.197719] audit: type=1400 audit(1580412302.255:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=835 comm="apparmor_parser"
[    6.197720] audit: type=1400 audit(1580412302.255:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=835 comm="apparmor_parser"
[    7.382580] Generic Realtek PHY r8169-900:00: attached PHY driver [Generic Realtek PHY] (mii_bus:phy_addr=r8169-900:00, irq=IGNORE)
[    7.501325] r8169 0000:09:00.0 enp9s0: Link is Down
[    7.510768] iwlwifi 0000:07:00.0: Applying debug destination EXTERNAL_DRAM
[    7.624679] iwlwifi 0000:07:00.0: Applying debug destination EXTERNAL_DRAM
[    7.689090] iwlwifi 0000:07:00.0: FW already configured (0) - re-configuring
[    8.004039] usb 3-2: DVB: adapter 1 frontend 0 frequency 0 out of range (174000000..862000000)
[    8.005807] dw2102: su3000_power_ctrl: 1, initialized 1
[    8.010046] m88ds3103 0-0068: found a 'Montage Technology M88DS3103' in cold state
[    8.010730] m88ds3103 0-0068: downloading firmware from file 'dvb-demod-m88ds3103.fw'
[    9.053069] m88ds3103 0-0068: found a 'Montage Technology M88DS3103' in warm state
[    9.053072] m88ds3103 0-0068: firmware version: 3.B
[    9.068879] usb 1-7: DVB: adapter 0 frontend 0 frequency 0 out of range (950000..2150000)
[   10.302366] rfkill: input handler disabled
[   11.222758] wlp7s0: authenticate with 22:b0:01:93:ec:6f
[   11.225841] wlp7s0: send auth to 22:b0:01:93:ec:6f (try 1/3)
[   11.265284] wlp7s0: authenticated
[   11.268220] wlp7s0: associate with 22:b0:01:93:ec:6f (try 1/3)
[   11.269281] wlp7s0: RX AssocResp from 22:b0:01:93:ec:6f (capab=0x1011 status=0 aid=4)
[   11.271328] wlp7s0: associated
[   11.278618] wlp7s0: Limiting TX power to 30 (30 - 0) dBm as advertised by 22:b0:01:93:ec:6f
[   11.465687] IPv6: ADDRCONF(NETDEV_CHANGE): wlp7s0: link becomes ready