API tools faq
paste
rvdr

Bootlog Radxa A7A

rvdr
May 28th, 2026
137
0
Never
6
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 68.40 KB | None | 0 0
raw download clone embed print report
  1. [305]HELLO! BOOT0 is starting!
  2. [308]BOOT0 commit : {9f6fab4f-dirty}
  3.  
  4. [315]EMMC 0x12
  5. [324]dram_para_total:0xf
  6. [327]vaild para:6 select dram para1
  7. [330][mmc]: mmc driver ver 2024-03-20 10:36
  8. [340][mmc]: Wrong media type 0x0, but host sdc2, try mmc first
  9. [346][mmc]: ***Try MMC card 2***
  10. [371]mmc_read_info 748:region magic is not right, retry more time 0
  11. [388]mmc_read_info 748:region magic is not right, retry more time 0
  12. [405]mmc_read_info 748:region magic is not right, retry more time 0
  13. [423]mmc_read_info 748:region magic is not right, go err 0
  14. [428]dump info registers:[431]
  15. 0x83394 : [432]0 [433]0 [434]0 [434]0 [435]
  16. [436][mmc]: RMCA FAIL!
  17. [438][mmc]: mmc read timing info fail
  18. [442][mmc]: wrong freq 2 at spd md 2
  19. [445][mmc]: force 25m
  20. [449][mmc]: MMC 5.1
  21. [451][mmc]: HSSDR52/SDR25 8 bit
  22. [454][mmc]: 25000000 Hz
  23. [456][mmc]: 29820 MB
  24. [458][mmc]: ***SD/MMC 2 init OK!!!***
  25. [464]boot param - magic error
  26. [467]DRAM BOOT DRIVE INFO: V0.601
  27. [472]DRAM_VCC set to 560 mv
  28. [474]DRAM CLK =2400 MHZ
  29. [477]DRAM Type =9 (8:LPDDR4,9:LPDDR5)
  30. [629]Training result is = 7
  31. [632]DRAM Pstate 1 training, frequency is 1200 Mhz
  32. [814]Training result is = 7
  33. [816]DRAM Pstate 2 training, frequency is 800 Mhz
  34. [1164]Training result is = 7
  35. [1167]DRAM Pstate 3 training, frequency is 400 Mhz
  36. [4902]Training result is = 7
  37. [4904]DRAM Pstate 0 training, frequency is 2400 Mhz
  38. [4913]Actual DRAM SIZE =6144 M
  39. [4916]DRAM SIZE =6144 MBytes, para1 = a10a, para2 = 18001001, dram_tpr13 = 10065
  40. [4931]DRAM simple test OK.
  41. [4937]error:bad magic.
  42. [5003]error: dtb not found for scp
  43. [5006]mmc not para
  44. [5008]Jump to ATF: monitor_base = 0x48000000, uboot_base = 0x4a000000, optee_base = 0x0
  45. NOTICE: BL31: OP-TEE 32bit detected
  46. NOTICE: BL31: U-BOOT 32bit detected
  47. NOTICE: BL31: v2.5(debug):5fc237a6a
  48. NOTICE: BL31: Built : 09:05:28, Feb 26 2025
  49. NOTICE: BL31: No DTB found.
  50. ERROR: Error initializing runtime service opteed_fast
  51.  
  52.  
  53. U-Boot 2018.07-12-boot-aw2501-gb2d229198b2-dirty (Jan 06 2026 - 03:45:33 +0000) Allwinner Technology
  54.  
  55. [05.059]CPU: Allwinner Family
  56. [05.062]Model: Radxa Cubie A7A
  57. I2C: ready
  58. [05.124]DRAM: 6 GiB
  59. [05.132]Relocation Offset is: 75d89000
  60. [05.185]secure enable bit: 0
  61. [05.189]PMU: AXP8191
  62. [05.191]PMU: AXP8191 VER_A
  63. FDT ERROR:fdt_get_regulator_name:get property handle twi-supply error:FDT_ERR_INTERNAL
  64. [05.203]bmu_axp515_probe pmic_bus_read fail
  65. [05.207][AXP8191] onoff status: 0x50 = 0x1, 0x51 = 0x0
  66. [05.211][AXP8191] charge status: 0x4 = 0x0
  67. [05.215]CPU=1014 MHz,PLL6=1200 Mhz,AHB=200 Mhz, APB1=24Mhz MBus=600Mhz
  68. [05.222]gic: sec monitor mode
  69. SPI ALL: ready
  70. [05.266]flash init start
  71. [05.268]workmode = 0,storage type = 2
  72. [05.271][mmc]: mmc driver ver uboot2018:2024-10-18 9:01:00 -- uboot2018:2025-03-28 10:03:00
  73. [05.282][mmc]: get sdly from uboot header fail
  74. [05.287][mmc]: Is not EXT_PARA0_ID or EXT_PARA0_TUNING_SUCCESS_FLAG!
  75. [05.293][mmc]: SUNXI SDMMC Controller Version:0x50610
  76. [05.302][mmc]: 200 MHz...
  77. [05.305][mmc]: sample: 24 - 104(ps)
  78. [05.308][mmc]: ds: 24 - 104(ps)
  79. [05.315][mmc]: mmc 2 cmd timeout 100 status 100
  80. [05.319][mmc]: smc 2 err, cmd 8, RTO
  81. [05.322][mmc]: mmc 2 close bus gating and reset
  82. [05.327][mmc]: give up reinit
  83. [05.330][mmc]: mmc 2 cmd timeout 100 status 100
  84. [05.334][mmc]: smc 2 err, cmd 55, RTO
  85. [05.338][mmc]: mmc 2 close bus gating and reset
  86. [05.342][mmc]: give up reinit
  87. mmc_read_info 1867:region magic is not right, retry more time 0
  88. mmc_read_info 1867:region magic is not right, retry more time 0
  89. mmc_read_info 1867:region magic is not right, retry more time 0
  90. mmc_read_info 1867:region magic is not right, go err 0
  91. dump info registers:
  92. 0xbbdabe00 : 0x00000000 0x00000000 0x00000000 0x00000000
  93. [05.386][mmc]: mmc_init: read mmc parameter fail, err -1
  94. [05.391][mmc]: gen_tuning_blk_bus8: total blk 10
  95. [05.395][mmc]: gen_tuning_blk_bus4: total blk 6
  96. [05.399][mmc]: Using 8 bit tuning now
  97. [05.404][mmc]: write_tuning_try_freq: write ok
  98. [05.409][mmc]: Pattern compare ok
  99. [05.411][mmc]: Write tuning pattern ok
  100. [05.415][mmc]: ================== HSSDR52_SDR25...
  101. [05.419][mmc]: skip freq 400000
  102. [05.422][mmc]: skip freq 25000000
  103. [05.425][mmc]: freq: 2-50000000-64-4
  104. [05.916][mmc]: [0-63|64]
  105. [05.918][mmc]: ================== HS200_SDR104...
  106. [05.923][mmc]: skip freq 400000
  107. [05.926][mmc]: skip freq 25000000
  108. [05.929][mmc]: freq: 2-50000000-64-4
  109. [06.421][mmc]: freq: 3-100000000-64-4
  110. [06.788][mmc]: freq: 4-150000000-64-4
  111. [08.070][mmc]: freq: 5-200000000-64-4
  112. [09.314][mmc]: [0-63|64]
  113. [09.316][mmc]: [0-63|64]
  114. [09.319][mmc]: [0-19|20] [34-63|30]
  115. [09.322][mmc]: [1-36|36] [51-63|13]
  116. [09.325][mmc]: ================== HSDDR52_DDR50...
  117. [09.330][mmc]: skip freq 400000
  118. [09.333][mmc]: freq: 1-25000000-64-4
  119. [09.824][mmc]: freq: 2-50000000-64-4
  120. [10.095][mmc]: [0-63|64]
  121. [10.097][mmc]: [0-47|48]
  122. [10.099][mmc]: ================== HS400...
  123. [10.103][mmc]: skip freq 400000
  124. [10.106][mmc]: skip freq 25000000
  125. [10.109][mmc]: freq: 2-50000000
  126. [10.156][mmc]: freq: 3-100000000
  127. [10.201][mmc]: freq: 4-150000000
  128. [10.237][mmc]: freq: 5-200000000
  129. [11.275][mmc]: speed mode: HS400
  130. [11.278][mmc]: [0-63|64]
  131. [11.280][mmc]: [0-63|64]
  132. [11.282][mmc]: [0-20|21] [31-57|27] [60-63|4]
  133. [11.286][mmc]: [0-37|38] [46-63|18]
  134. [11.290][mmc]: skip freq 400000
  135. [11.293][mmc]: skip freq 25000000
  136. [11.296][mmc]: freq: 2-50000000-64-4
  137. [11.641][mmc]: freq: 3-100000000-64-4
  138. [11.834][mmc]: freq: 4-150000000-64-4
  139. [11.957][mmc]: freq: 5-200000000-64-4
  140. [12.043][mmc]: [2-63|62]
  141. [12.045][mmc]: [2-45|44]
  142. [12.047][mmc]: [2-28|27]
  143. [12.050][mmc]: *** hs400 200m: data win=10, delay cell = 104 ***
  144. [12.055][mmc]: [2-19|18]
  145. [12.058][mmc]: DS26/SDR12: 0xffffffff 0xffffffff
  146. [12.062][mmc]: HSSDR52/SDR25: 0xff20ffff 0xffffffff
  147. [12.067][mmc]: HSDDR52/DDR50: 0xff1820ff 0xffffffff
  148. [12.071][mmc]: HS200/SDR104: 0x2020ffff 0xffff1331
  149. [12.076][mmc]: HS400: 0x1821ffff 0xffff0b0f
  150. [12.080][mmc]: HS400: 0x2020ffff 0xffff132c
  151. [12.084][mmc]: Best spd md: 4-HS400, freq: 5-200000000, Bus width: 8
  152. [12.090][mmc]: write mmc 2 info ok
  153. [12.093]sunxi flash init ok
  154. [12.097]Loading Environment from SUNXI_FLASH... OK
  155. No ethernet found.
  156. [12.135]NOT support bridge yet
  157. [12.137]Warn: no find panel or bridge
  158. [12.142]hdmi0@5520000 disconnected
  159. [12.145]drm hdmi get mode: 1920x1080@60Hz
  160. hdmi0@5520000: use force output detailed mode clock 148500 kHz, flags[5]
  161. H: 1920 2008 2052 2200
  162. V: 1080 1084 1089 1125
  163. bus_format: 0
  164. partno erro : can't find partition primary
  165. [12.171]primary is not found!
  166. partno erro : can't find partition boot-resource
  167. [12.179]boot-resource is not found!
  168. [12.182]Can not load logo.bmp file!
  169. [12.185]load logo fail
  170. [12.194]the secure storage item0 copy0 magic is bad
  171. [12.206]the secure storage item0 copy1 magic is bad
  172. [12.210]usb burn from boot
  173. delay time 0
  174. [12.217]usb prepare ok
  175. [12.520]overtime
  176. [12.524]do_burn_from_boot usb : no usb exist
  177. cann't get the boot_base from the env
  178. [12.539]update part info
  179. [12.544]battery temp is -1
  180. [12.547]update bootcmd
  181. [12.555](not enough data: expected >= 8 cells, got 4 cells)
  182. Link up timeout
  183. Speed change timeout
  184. PCIe speed of Gen1
  185. Override default fdtfile to allwinner/sun60i-a733-cubie-a7a.dtb
  186. [14.994]libfdt fdt_check_header(): FDT_ERR_BADMAGIC
  187. [14.999][mmc]: can't find node "sunxi-mmc2" try "mmc"
  188. [15.005][mmc]: can't find node "mmc2"
  189. [15.008][mmc]: fdt err returned <no error>
  190. [15.013][mmc]: get sunxi-mmc2 string failed
  191. [15.018]The storage not support sample function
  192. [15.024]## error: update_fdt_dram_para_from_bootpara : FDT_ERR_NOTFOUND
  193. [15.031]chip id : 0x00005100 0x00004900 0x00004810 0x00002222
  194. [15.036]mac addr => 08:51:49:58:00:f2
  195. [15.039]chip id : 0x00005100 0x00004900 0x00004810 0x00002222
  196. [15.045]mac addr => 08:51:49:58:00:f3
  197. [15.049]/chosen/rng-seed node not exit
  198. [15.052]no battery, disabled battery functons
  199. [15.057]Could not find nodeoffset for bat_supply
  200. [15.061]update dts
  201. curr_device:2
  202. Device: SUNXI SD/MMC
  203. Manufacturer ID: 15
  204. OEM: 100
  205. Name: BJTD4
  206. Bus Speed: 200000000
  207. Mode : MMC legacy
  208. Rd Block Len: 512
  209. MMC version 5.1
  210. High Capacity: Yes
  211. Capacity: 29.1 GiB
  212. Bus Width: 8-bit DDR
  213. Erase Group Size: 512 KiB
  214. HC WP Group Size: 8 MiB
  215. User Capacity: 29.1 GiB WRREL
  216. Boot Capacity: 4 MiB ENH
  217. RPMB Capacity: 4 MiB ENH
  218. [ufs]info:Driver version 0.0.24 2024.12.30 16:00
  219. [ufs]info:Cal words 0x60:val 0x8c780000, 0x64:val 0x4f219b7c
  220. [ufs]err:uic c 16,uic a 0,1,0
  221. [ufs]err:e 80000010,0,0,0,0
  222. [ufs]err:int s 0,400
  223. [ufs]err:Device not present
  224. [ufs]err:wait device link startup failed
  225. [ufs]info:peer link startup timeout
  226. [ufs]info:Cal words 0x60:val 0x8c780000, 0x64:val 0x4f219b7c
  227. [ufs]err:uic c 16,uic a 0,1,0
  228. [ufs]err:e 80000010,0,0,0,0
  229. [ufs]err:int s 0,400
  230. [ufs]err:Device not present
  231. [ufs]err:wait device link startup failed
  232. [ufs]info:peer link startup timeout
  233. [ufs]info:Cal words 0x60:val 0x8c780000, 0x64:val 0x4f219b7c
  234. [ufs]err:uic c 16,uic a 0,1,0
  235. [ufs]err:e 80000010,0,0,0,0
  236. [ufs]err:int s 0,400
  237. [ufs]err:Device not present
  238. [ufs]err:wait device link startup failed
  239. [ufs]info:peer link startup timeout
  240. [ufs]info:Cal words 0x60:val 0x8c780000, 0x64:val 0x4f219b7c
  241. [ufs]err:uic c 16,uic a 0,1,0
  242. [ufs]err:e 80000010,0,0,0,0
  243. [ufs]err:int s 0,400
  244. [ufs]err:Device not present
  245. [ufs]err:wait device link startup failed
  246. [ufs]info:peer link startup timeout
  247. [ufs]err:link startup failed -6
  248. [ufs]err:ufshcd_probe() failed -6
  249. fail to init ufs
  250. sunxi_flash - sunxi_flash sub-system
  251.  
  252. Usage:
  253. sunxi_flash sunxi_flash init storage_type
  254. sunxi_flash read mem_addr part_name [size]
  255. sunxi_flash read_mtd mem_addr part_name [size]
  256. sunxi_flash write <mem_addr> <part_name> [size]
  257. sunxi_flash write <mem_addr> <part_name> [offset] [size]
  258. sunxi_flash write_mtd <mem_addr> <part_name>
  259. sunxi_flash boot0 force_dram_update_size <new_val>
  260. sunxi_flash boot0 force_dram_update_flag <new_val>
  261.  
  262. Hit any key to stop autoboot: 0
  263. starting USB...
  264. USB0: start sunxi USB-DRD...
  265. config usb clk ok
  266. sunxi USB-DRD init ok...
  267. USB EHCI 1.00
  268. scanning bus 0 for devices... 1 USB Device(s) found
  269. USB1: start sunxi USB1-Host...
  270. config usb clk ok
  271. sunxi USB1-Host init ok...
  272. USB EHCI 1.00
  273. scanning bus 1 for devices... 1 USB Device(s) found
  274. scanning usb for storage devices... 0 Storage Device(s) found
  275.  
  276. Device 0: device type unknown
  277. ... is now current device
  278. ** Bad device usb 0 **
  279. ** Bad device usb 0 **
  280. [19.988][mmc]: MMC Device 0 not found
  281. no mmc device at slot 0
  282. Scanning PCI devices on bus 1
  283. BusDevFun VendorId DeviceId Device Class Sub-Class
  284. _____________________________________________________________
  285.  
  286. Device 0: unknown device
  287. ufs has init
  288. sunxi_flash_ufs - check sunxi UFS state; only dev 0 is valid
  289.  
  290. Usage:
  291. sunxi_flash_ufs dev <n>
  292. return 0 for successful UFS initialization, -1 otherwise.
  293.  
  294. [20.024][mmc]: MMC Device 1 not found
  295. no mmc device at slot 1
  296. mmc2(part 0) is current device
  297. Scanning mmc 2:1...
  298. Found U-Boot script /boot.scr
  299. 5041 bytes read in 1 ms (4.8 MiB/s)
  300. ## Executing script at 4fc00000
  301. subfdt=sun60i-a733-cubie-a7a.dtb
  302. U-boot loaded from SD
  303. Boot script loaded from mmc
  304. 425 bytes read in 1 ms (415 KiB/s)
  305. subfdt=sun60i-a733-cubie-a7a.dtb
  306. Load fdt: /dtb/allwinner/sun60i-a733-cubie-a7a.dtb
  307. 185387 bytes read in 3 ms (58.9 MiB/s)
  308. 26061312 bytes read in 81 ms (306.8 MiB/s)
  309. 23748098 bytes read in 74 ms (306.1 MiB/s)
  310. [20.377]The storage not support sample function
  311. [20.458]mac addr => 08:51:49:58:00:f2
  312. [20.462]mac addr => 08:51:49:58:00:f3
  313. [20.467]no battery, disabled battery functons
  314. [20.471]Could not find nodeoffset for bat_supply
  315. [20.475]update dts
  316. stop sunxi USB-DRD ok...
  317. stop sunxi USB1-Host ok...
  318. Loading Ramdisk to 4895a000, end 49fffe02 ... OK
  319. ERROR: reserving fdt memory region failed (addr=48000000 size=1000000)
  320. [20.531]Starting kernel ...
  321.  
  322. [20.534]total: 20534 ms
  323.  
  324. [20.536][mmc]: mmc exit start
  325. [20.555][mmc]: mmc 2 exit ok
  326. NOTICE: [SCP] :wait arisc ready....
  327. NOTICE: [SCP] :arisc version: [d463b9da43dc50320f21ba51c6c51afe2db20d83]
  328. NOTICE: [SCP] :arisc startup ready
  329. NOTICE: [SCP] :arisc startup notify message feedback
  330. NOTICE: [SCP] :sunxi-arisc driver is starting
  331. NOTICE: BL3-1: Next image address = 0x40200000
  332. NOTICE: BL3-1: Next image spsr = 0x3c5
  333. [ 0.000000][ T0] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
  334. [ 0.000000][ T0] Linux version 6.18.19-edge-sun60iw2 (build@armbian) (aarch64-linux-gnu-gcc (Debian 14.2.0-19) 14.2.0, GNU ld (GNU Binutils for Debian) 2.44) #5 SMP PREEMPT Thu Apr 23 17:28:31 UTC 2026
  335. [ 0.000000][ T0] KASLR disabled due to lack of seed
  336. [ 0.000000][ T0] random: crng init done
  337. [ 0.000000][ T0] Machine model: sun60iw2
  338. [ 0.000000][ T0] efi: UEFI not found.
  339. [ 0.000000][ T0] OF: reserved mem: 0x0000000048000000..0x0000000048ffffff (16384 KiB) map non-reusable bl31
  340. [ 0.000000][ T0] NUMA: Faking a node at [mem 0x0000000040000000-0x00000001bfffffff]
  341. [ 0.000000][ T0] NODE_DATA(0) allocated [mem 0x1bf304440-0x1bf306bbf]
  342. [ 0.000000][ T0] Zone ranges:
  343. [ 0.000000][ T0] DMA [mem 0x0000000040000000-0x00000000ffffffff]
  344. [ 0.000000][ T0] DMA32 empty
  345. [ 0.000000][ T0] Normal [mem 0x0000000100000000-0x00000001bfffffff]
  346. [ 0.000000][ T0] Movable zone start for each node
  347. [ 0.000000][ T0] Early memory node ranges
  348. [ 0.000000][ T0] node 0: [mem 0x0000000040000000-0x00000001bfffffff]
  349. [ 0.000000][ T0] Initmem setup node 0 [mem 0x0000000040000000-0x00000001bfffffff]
  350. [ 0.000000][ T0] cma: Reserved 32 MiB at 0x00000000fe000000
  351. [ 0.000000][ T0] psci: probing for conduit method from DT.
  352. [ 0.000000][ T0] psci: PSCIv1.1 detected in firmware.
  353. [ 0.000000][ T0] psci: Using standard PSCI v0.2 function IDs
  354. [ 0.000000][ T0] psci: MIGRATE_INFO_TYPE not supported.
  355. [ 0.000000][ T0] psci: SMC Calling Convention v1.2
  356. [ 0.000000][ T0] percpu: Embedded 25 pages/cpu s62104 r8192 d32104 u102400
  357. [ 0.000000][ T0] Detected VIPT I-cache on CPU0
  358. [ 0.000000][ T0] CPU features: detected: GICv3 CPU interface
  359. [ 0.000000][ T0] CPU features: detected: Qualcomm erratum 1009, or ARM erratum 1286807, 2441009
  360. [ 0.000000][ T0] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
  361. [ 0.000000][ T0] alternatives: applying boot alternatives
  362. [ 0.000000][ T0] Kernel command line: root=UUID=fe0c145d-0712-4dad-82d3-96370d6294ef rootwait rootfstype=ext4 splash plymouth.ignore-serial-consoles console=ttyS0,115200 console=tty1 consoleblank=0 loglevel=7 ubootpart=9ab39129-3320-4669-9f58-efcae5d33fbd usb-storage.quirks= mac_addr= coherent_pool=2M irqchip.gicv3_pseudo_nmi=0 cgroup_enable=cpuset cgroup_memory=1 swapaccount=1 kasan=off no_console_suspend fsck.fix=yes fsck.repair=yes net.ifnames=0 cgroup_enable=memory
  363. [ 0.000000][ T0] Unknown kernel command line parameters "splash ubootpart=9ab39129-3320-4669-9f58-efcae5d33fbd mac_addr= cgroup_enable=memory cgroup_memory=1", will be passed to user space.
  364. [ 0.000000][ T0] printk: log buffer data + meta data: 131072 + 458752 = 589824 bytes
  365. [ 0.000000][ T0] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
  366. [ 0.000000][ T0] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
  367. [ 0.000000][ T0] software IO TLB: area num 8.
  368. [ 0.000000][ T0] software IO TLB: mapped [mem 0x00000000fa000000-0x00000000fe000000] (64MB)
  369. [ 0.000000][ T0] Fallback order for Node 0: 0
  370. [ 0.000000][ T0] Built 1 zonelists, mobility grouping on. Total pages: 1572864
  371. [ 0.000000][ T0] Policy zone: Normal
  372. [ 0.000000][ T0] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
  373. [ 0.000000][ T0] stackdepot: allocating hash table via alloc_large_system_hash
  374. [ 0.000000][ T0] stackdepot hash table entries: 524288 (order: 11, 8388608 bytes, linear)
  375. [ 0.000000][ T0] stackdepot: allocating space for 8192 stack pools via memblock
  376. [ 0.000000][ T0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
  377. [ 0.000000][ T0] rcu: Preemptible hierarchical RCU implementation.
  378. [ 0.000000][ T0] rcu: RCU event tracing is enabled.
  379. [ 0.000000][ T0] Trampoline variant of Tasks RCU enabled.
  380. [ 0.000000][ T0] Tracing variant of Tasks RCU enabled.
  381. [ 0.000000][ T0] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  382. [ 0.000000][ T0] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
  383. [ 0.000000][ T0] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
  384. [ 0.000000][ T0] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  385. [ 0.000000][ T0] GICv3: 256 SPIs implemented
  386. [ 0.000000][ T0] GICv3: 0 Extended SPIs implemented
  387. [ 0.000000][ T0] Root IRQ handler: gic_handle_irq
  388. [ 0.000000][ T0] GICv3: GICv3 features: 16 PPIs
  389. [ 0.000000][ T0] GICv3: GICD_CTLR.DS=0, SCR_EL3.FIQ=0
  390. [ 0.000000][ T0] GICv3: CPU0: found redistributor 0 region 0:0x0000000003460000
  391. [ 0.000000][ T0] ITS: No ITS available, not enabling LPIs
  392. [ 0.000000][ T0] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@100[1] /cpus/cpu@200[2] /cpus/cpu@300[3] /cpus/cpu@400[4] /cpus/cpu@500[5] }
  393. [ 0.000000][ T0] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@600[6] /cpus/cpu@700[7] }
  394. [ 0.000000][ T0] rcu: srcu_init: Setting srcu_struct sizes based on contention.
  395. [ 0.000000][ T0] AW BSP version: 54e9e5fb62, 2026-05-25 15:25:04, RadxaOS SDK
  396. [ 0.000000][ T0] sunxi:ccu-ng:[INFO]: ccu will stop clk in init process
  397. [ 0.000000][ T0] null-device:msilite0-ahb-gate: connection ID is greater than 16
  398. [ 0.000000][ T0] null-device:usb-sys-ahb-gate: connection ID is greater than 16
  399. [ 0.000000][ T0] null-device:vid-out1-ahb-gate: connection ID is greater than 16
  400. [ 0.000000][ T0] null-device:vid-out0-ahb-gate: connection ID is greater than 16
  401. [ 0.000000][ T0] null-device:msilite2-mbus-gate: connection ID is greater than 16
  402. [ 0.000000][ T0] null-device:msilite0-mbus-gate: connection ID is greater than 16
  403. [ 0.000000][ T0] null-device:serdes-mbus-gate: connection ID is greater than 16
  404. [ 0.000000][ T0] null-device:vid-in-mbus-gate: connection ID is greater than 16
  405. [ 0.000000][ T0] null-device:ve-dec-mbus-gate: connection ID is greater than 16
  406. [ 0.000000][ T0] null-device:iommu1-mbus-gate: connection ID is greater than 16
  407. [ 0.000000][ T0] null-device:iommu0-mbus-gate: connection ID is greater than 16
  408. [ 0.000000][ T0] null-device:vo0-tconlcd0-bus: connection ID is greater than 16
  409. [ 0.000000][ T0] null-device:vo0-tconlcd1-bus: connection ID is greater than 16
  410. [ 0.000000][ T0] null-device:vo0-tconlcd2-bus: connection ID is greater than 16
  411. [ 0.000000][ T0] null-device:pll-peri0-2x-auto: connection ID is greater than 16
  412. [ 0.000000][ T0] null-device:pll-peri0-800m-auto: connection ID is greater than 16
  413. [ 0.000000][ T0] null-device:pll-peri0-600m-auto: connection ID is greater than 16
  414. [ 0.000000][ T0] null-device:pll-peri0-480m-all-auto: connection ID is greater than 16
  415. [ 0.000000][ T0] null-device:pll-peri0-480m-auto: connection ID is greater than 16
  416. [ 0.000000][ T0] null-device:pll-peri0-160m-auto: connection ID is greater than 16
  417. [ 0.000000][ T0] null-device:pll-peri0-300m-all-auto: connection ID is greater than 16
  418. [ 0.000000][ T0] null-device:pll-peri0-300m-auto: connection ID is greater than 16
  419. [ 0.000000][ T0] null-device:pll-peri0-150m-auto: connection ID is greater than 16
  420. [ 0.000000][ T0] null-device:pll-peri0-400m-all-auto: connection ID is greater than 16
  421. [ 0.000000][ T0] null-device:pll-peri0-400m-auto: connection ID is greater than 16
  422. [ 0.000000][ T0] null-device:pll-peri0-200m-auto: connection ID is greater than 16
  423. [ 0.000000][ T0] null-device:pll-peri1-800m-auto: connection ID is greater than 16
  424. [ 0.000000][ T0] null-device:pll-peri1-600m-all-auto: connection ID is greater than 16
  425. [ 0.000000][ T0] null-device:pll-peri1-600m-auto: connection ID is greater than 16
  426. [ 0.000000][ T0] null-device:pll-peri1-480m-all-auto: connection ID is greater than 16
  427. [ 0.000000][ T0] null-device:pll-peri1-480m-auto: connection ID is greater than 16
  428. [ 0.000000][ T0] null-device:pll-peri1-160m-auto: connection ID is greater than 16
  429. [ 0.000000][ T0] null-device:pll-peri1-300m-all-auto: connection ID is greater than 16
  430. [ 0.000000][ T0] null-device:pll-peri1-300m-auto: connection ID is greater than 16
  431. [ 0.000000][ T0] null-device:pll-peri1-150m-auto: connection ID is greater than 16
  432. [ 0.000000][ T0] null-device:pll-peri1-400m-all-auto: connection ID is greater than 16
  433. [ 0.000000][ T0] null-device:pll-peri1-400m-auto: connection ID is greater than 16
  434. [ 0.000000][ T0] null-device:pll-peri1-200m-auto: connection ID is greater than 16
  435. [ 0.000000][ T0] null-device:pll-video2-3x-auto: connection ID is greater than 16
  436. [ 0.000000][ T0] null-device:pll-video1-3x-auto: connection ID is greater than 16
  437. [ 0.000000][ T0] null-device:pll-video0-3x-auto: connection ID is greater than 16
  438. [ 0.000000][ T0] null-device:pll-video2-4x-auto: connection ID is greater than 16
  439. [ 0.000000][ T0] null-device:pll-video1-4x-auto: connection ID is greater than 16
  440. [ 0.000000][ T0] null-device:pll-video0-4x-auto: connection ID is greater than 16
  441. [ 0.000000][ T0] null-device:pll-audio1-div5-auto: connection ID is greater than 16
  442. [ 0.000000][ T0] null-device:pll-audio1-div2-auto: connection ID is greater than 16
  443. [ 0.000000][ T0] null-device:pll-audio1-4x-auto: connection ID is greater than 16
  444. [ 0.000000][ T0] sunxi:ccu-ng:[INFO]: ccu: sunxi ccu init OK
  445. [ 0.000000][ T0] sunxi:ccu-ng:[INFO]: sunxi ccu common driver version: 1.2.4
  446. [ 0.000000][ T0] sunxi:ccu-ng:[INFO]: sunxi ccu driver version: 1.0.17
  447. [ 0.000000][ T0] arch_timer: cp15 timer running at 24.00MHz (virt).
  448. [ 0.000000][ T0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  449. [ 0.000000][ T0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  450. [ 0.000282][ T0] sunxi:timer_sun50i:[INFO]: sun50i timer init:0xffffff00000001, driver version: 1.1.3
  451. [ 0.000290][ T0] clocksource: timer: mask: 0xffffffffffffff max_cycles: 0x1623fa770, max_idle_ns: 440795202238 ns
  452. [ 0.001677][ T0] Console: colour dummy device 80x25
  453. [ 0.001690][ T0] printk: legacy console [tty1] enabled
  454. [ 0.003081][ T0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
  455. [ 0.003113][ T0] pid_max: default: 32768 minimum: 301
  456. [ 0.003236][ T0] LSM: initializing lsm=capability,selinux
  457. [ 0.003311][ T0] SELinux: Initializing.
  458. [ 0.003808][ T0] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
  459. [ 0.003852][ T0] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
  460. [ 0.005279][ T1] cacheinfo: Unable to detect cache hierarchy for CPU 0
  461. [ 0.006359][ T1] rcu: Hierarchical SRCU implementation.
  462. [ 0.006380][ T1] rcu: Max phase no-delay instances is 1000.
  463. [ 0.006620][ T1] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
  464. [ 0.008071][ T1] EFI services will not be available.
  465. [ 0.008516][ T1] smp: Bringing up secondary CPUs ...
  466. [ 0.009103][ T0] Detected VIPT I-cache on CPU1
  467. [ 0.009171][ T0] GICv3: CPU1: found redistributor 100 region 0:0x0000000003480000
  468. [ 0.009213][ T0] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
  469. [ 0.009879][ T0] Detected VIPT I-cache on CPU2
  470. [ 0.009941][ T0] GICv3: CPU2: found redistributor 200 region 0:0x00000000034a0000
  471. [ 0.009975][ T0] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
  472. [ 0.010594][ T0] Detected VIPT I-cache on CPU3
  473. [ 0.010646][ T0] GICv3: CPU3: found redistributor 300 region 0:0x00000000034c0000
  474. [ 0.010675][ T0] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
  475. [ 0.011302][ T0] Detected VIPT I-cache on CPU4
  476. [ 0.011355][ T0] GICv3: CPU4: found redistributor 400 region 0:0x00000000034e0000
  477. [ 0.011382][ T0] CPU4: Booted secondary processor 0x0000000400 [0x412fd050]
  478. [ 0.011982][ T0] Detected VIPT I-cache on CPU5
  479. [ 0.012035][ T0] GICv3: CPU5: found redistributor 500 region 0:0x0000000003500000
  480. [ 0.012062][ T0] CPU5: Booted secondary processor 0x0000000500 [0x412fd050]
  481. [ 0.012701][ T0] CPU features: detected: Spectre-v4
  482. [ 0.012707][ T0] CPU features: detected: Spectre-BHB
  483. [ 0.012712][ T0] CPU features: detected: SSBS not fully self-synchronizing
  484. [ 0.012714][ T0] Detected PIPT I-cache on CPU6
  485. [ 0.012746][ T0] GICv3: CPU6: found redistributor 600 region 0:0x0000000003520000
  486. [ 0.012761][ T0] CPU6: Booted secondary processor 0x0000000600 [0x414fd0b1]
  487. [ 0.013315][ T0] Detected PIPT I-cache on CPU7
  488. [ 0.013355][ T0] GICv3: CPU7: found redistributor 700 region 0:0x0000000003540000
  489. [ 0.013371][ T0] CPU7: Booted secondary processor 0x0000000700 [0x414fd0b1]
  490. [ 0.013443][ T1] smp: Brought up 1 node, 8 CPUs
  491. [ 0.013707][ T1] SMP: Total of 8 processors activated.
  492. [ 0.013721][ T1] CPU: All CPU(s) started at EL1
  493. [ 0.013746][ T1] CPU features: detected: 32-bit EL0 Support
  494. [ 0.013761][ T1] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
  495. [ 0.013780][ T1] CPU features: detected: Common not Private translations
  496. [ 0.013794][ T1] CPU features: detected: CRC32 instructions
  497. [ 0.013813][ T1] CPU features: detected: RCpc load-acquire (LDAPR)
  498. [ 0.013828][ T1] CPU features: detected: LSE atomic instructions
  499. [ 0.013842][ T1] CPU features: detected: Privileged Access Never
  500. [ 0.013856][ T1] CPU features: detected: PMUv3
  501. [ 0.013869][ T1] CPU features: detected: RAS Extension Support
  502. [ 0.013888][ T1] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
  503. [ 0.013964][ T1] alternatives: applying system-wide alternatives
  504. [ 0.017504][ T1] CPU features: detected: Hardware dirty bit management on CPU6-7
  505. [ 0.017924][ T1] Memory: 5995320K/6291456K available (15680K kernel code, 2282K rwdata, 5700K rodata, 1664K init, 488K bss, 258744K reserved, 32768K cma-reserved)
  506. [ 0.020028][ T1] devtmpfs: initialized
  507. [ 0.032978][ T1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  508. [ 0.033013][ T1] posixtimers hash table entries: 4096 (order: 4, 65536 bytes, linear)
  509. [ 0.033077][ T1] futex hash table entries: 2048 (131072 bytes on 1 NUMA nodes, total 128 KiB, linear).
  510. [ 0.033251][ T1] 26256 pages in range for non-PLT usage
  511. [ 0.033255][ T1] 517776 pages in range for PLT usage
  512. [ 0.033414][ T1] pinctrl core: initialized pinctrl subsystem
  513. [ 0.033707][ T1] DMI not present or invalid.
  514. [ 0.033807][ T1] NET: Registered PF_NETLINK/PF_ROUTE protocol family
  515. [ 0.034423][ T1] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
  516. [ 0.034573][ T1] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
  517. [ 0.034700][ T1] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
  518. [ 0.034724][ T1] audit: initializing netlink subsys (disabled)
  519. [ 0.034823][ T67] audit: type=2000 audit(0.032:1): state=initialized audit_enabled=0 res=1
  520. [ 0.034977][ T1] thermal_sys: Registered thermal governor 'fair_share'
  521. [ 0.034981][ T1] thermal_sys: Registered thermal governor 'step_wise'
  522. [ 0.034990][ T1] thermal_sys: Registered thermal governor 'user_space'
  523. [ 0.034995][ T1] thermal_sys: Registered thermal governor 'power_allocator'
  524. [ 0.035023][ T1] cpuidle: using governor menu
  525. [ 0.035216][ T1] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  526. [ 0.035333][ T1] ASID allocator initialised with 65536 entries
  527. [ 0.035412][ T1] Serial: AMBA PL011 UART driver
  528. [ 0.046338][ T1] /soc@3000000/de@5000000: Fixed dependency cycle(s) with /soc@3000000/tcon4@5731000
  529. [ 0.046362][ T1] /soc@3000000/de@5000000: Fixed dependency cycle(s) with /soc@3000000/tcon3@5730000
  530. [ 0.046393][ T1] /soc@3000000/tcon3@5730000: Fixed dependency cycle(s) with /soc@3000000/hdmi0@5520000
  531. [ 0.046406][ T1] /soc@3000000/tcon3@5730000: Fixed dependency cycle(s) with /soc@3000000/de@5000000
  532. [ 0.046425][ T1] /soc@3000000/tcon4@5731000: Fixed dependency cycle(s) with /soc@3000000/de@5000000
  533. [ 0.046443][ T1] /soc@3000000/hdmi0@5520000: Fixed dependency cycle(s) with /soc@3000000/tcon3@5730000
  534. [ 0.046835][ T1] sunxi:ccu-ng:[INFO]: sunxi rtc-ccu version: 0.5.5
  535. [ 0.047129][ T1] sunxi:ccu-ng:[INFO]: rtc_ccu: sunxi ccu init OK
  536. [ 0.053570][ T1] sunxi:ccu-ng:[INFO]: cpupll_ccu: sunxi ccu init OK
  537. [ 0.053579][ T1] sunxi:ccu-ng:[INFO]: sunxi pll_cpu driver version: 0.0.5
  538. [ 0.053743][ T1] sunxi:ccu-ng:[INFO]: r_ccu: sunxi ccu init OK
  539. [ 0.053752][ T1] sunxi:ccu-ng:[INFO]: sunxi ccu driver version: 0.5.6
  540. [ 0.054307][ T1] sunxi:pin:[INFO]: sunxi pinctrl version: 0.6.8
  541. [ 0.059655][ T1] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation.
  542. [ 0.060234][ T1] sunxi:pin-2000000.pinctrl:[INFO]: pinctrl withstand voltage config mode=auto_hard
  543. [ 0.060244][ T1] sunxi:pin:[INFO]: sunxi pinctrl core driver version: 1.4.11
  544. [ 0.060467][ T1] sunxi:pin:[INFO]: sunxi r-pinctrl version: 0.0.2
  545. [ 0.061430][ T1] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation.
  546. [ 0.061615][ T1] sunxi:pin-7025000.pinctrl:[INFO]: pinctrl withstand voltage config mode=auto_hard
  547. [ 0.064187][ T1] /soc@3000000/de@5000000: Fixed dependency cycle(s) with /soc@3000000/tcon4@5731000
  548. [ 0.064207][ T1] /soc@3000000/de@5000000: Fixed dependency cycle(s) with /soc@3000000/tcon3@5730000
  549. [ 0.064429][ T1] /soc@3000000/de@5000000: Fixed dependency cycle(s) with /soc@3000000/tcon3@5730000
  550. [ 0.064463][ T1] /soc@3000000/tcon3@5730000: Fixed dependency cycle(s) with /soc@3000000/hdmi0@5520000
  551. [ 0.064475][ T1] /soc@3000000/tcon3@5730000: Fixed dependency cycle(s) with /soc@3000000/de@5000000
  552. [ 0.064549][ T1] /soc@3000000/de@5000000: Fixed dependency cycle(s) with /soc@3000000/tcon4@5731000
  553. [ 0.064581][ T1] /soc@3000000/tcon4@5731000: Fixed dependency cycle(s) with /soc@3000000/de@5000000
  554. [ 0.064663][ T1] /soc@3000000/tcon3@5730000: Fixed dependency cycle(s) with /soc@3000000/hdmi0@5520000
  555. [ 0.064691][ T1] /soc@3000000/hdmi0@5520000: Fixed dependency cycle(s) with /soc@3000000/tcon3@5730000
  556. [ 0.065465][ T1] /soc@3000000/pcie@6000000: Fixed dependency cycle(s) with /soc@3000000/pcie@6000000/legacy-interrupt-controller
  557. [ 0.066725][ T1] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
  558. [ 0.066736][ T1] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
  559. [ 0.066743][ T1] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
  560. [ 0.066749][ T1] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
  561. [ 0.066755][ T1] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
  562. [ 0.066761][ T1] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
  563. [ 0.066767][ T1] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
  564. [ 0.066773][ T1] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
  565. [ 0.067698][ T1] fbcon: Taking over console
  566. [ 0.068172][ T1] iommu: Default domain type: Translated
  567. [ 0.068180][ T1] iommu: DMA domain TLB invalidation policy: strict mode
  568. [ 0.068487][ T78] sunxi:pin-7025000.pinctrl:[INFO]: Auto power withstand voltage configuration detected, automatically exit!
  569. [ 0.069135][ T1] SCSI subsystem initialized
  570. [ 0.069234][ T1] usbcore: registered new interface driver usbfs
  571. [ 0.069254][ T1] usbcore: registered new interface driver hub
  572. [ 0.069273][ T1] usbcore: registered new device driver usb
  573. [ 0.069480][ T1] mc: Linux media interface: v0.10
  574. [ 0.069507][ T1] videodev: Linux video capture interface: v2.00
  575. [ 0.069557][ T1] EDAC MC: Ver: 3.0.0
  576. [ 0.069758][ T1] scmi_core: SCMI protocol bus registered
  577. [ 0.069967][ T1] FPGA manager framework
  578. [ 0.074263][ T1] sun6i-dma 4601000.dma-controller: sunxi dma probed, driver version: 1.2.6
  579. [ 0.074460][ T1] iommu_master csi_iommu: attach fail:-517
  580. [ 0.074499][ T1] sunxi-iommu-v2 3900000.iommu: master probe failed with -517
  581. [ 0.074683][ T1] vgaarb: loaded
  582. [ 0.074860][ T1] sunxi:pwm-2527000.pwm:[INFO]: start probe
  583. [ 0.075197][ T1] sunxi:pwm-2527000.pwm:[INFO]: pwmchip probe success
  584. [ 0.075238][ T1] sunxi:pwm-2528000.pwm:[INFO]: start probe
  585. [ 0.075489][ T1] sunxi:pwm-2528000.pwm:[INFO]: pwmchip probe success
  586. [ 0.075530][ T1] sunxi:pwm-7023000.pwm:[INFO]: start probe
  587. [ 0.075789][ T1] sunxi:pwm-7023000.pwm:[INFO]: pwmchip probe success
  588. [ 0.076022][ T1] clocksource: Switched to clocksource arch_sys_counter
  589. [ 0.076165][ T1] VFS: Disk quotas dquot_6.6.0
  590. [ 0.076181][ T1] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  591. [ 0.080619][ T1] NET: Registered PF_INET protocol family
  592. [ 0.080798][ T1] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
  593. [ 0.084632][ T1] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
  594. [ 0.084695][ T1] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
  595. [ 0.084709][ T1] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
  596. [ 0.085114][ T1] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
  597. [ 0.086640][ T1] TCP: Hash tables configured (established 65536 bind 65536)
  598. [ 0.086808][ T1] MPTCP token hash table entries: 8192 (order: 6, 196608 bytes, linear)
  599. [ 0.086896][ T1] UDP hash table entries: 4096 (order: 6, 262144 bytes, linear)
  600. [ 0.087146][ T1] UDP-Lite hash table entries: 4096 (order: 6, 262144 bytes, linear)
  601. [ 0.087457][ T1] NET: Registered PF_UNIX/PF_LOCAL protocol family
  602. [ 0.087737][ T1] RPC: Registered named UNIX socket transport module.
  603. [ 0.087745][ T1] RPC: Registered udp transport module.
  604. [ 0.087750][ T1] RPC: Registered tcp transport module.
  605. [ 0.087755][ T1] RPC: Registered tcp-with-tls transport module.
  606. [ 0.087760][ T1] RPC: Registered tcp NFSv4.1 backchannel transport module.
  607. [ 0.088144][ T1] sunxi_usb_udc 4100000.udc-controller: sunxi:sunxi_usb_udc UDC Inner DMA Feature - wordaddr: 1, extend: enabled
  608. [ 0.088412][ T1] PCI: CLS 0 bytes, default 64
  609. [ 0.088622][ T81] Trying to unpack rootfs image as initramfs...
  610. [ 0.092207][ T1] kvm [1]: HYP mode not available
  611. [ 0.092695][ T1] Initialise system trusted keyrings
  612. [ 0.092797][ T1] workingset: timestamp_bits=42 max_order=21 bucket_order=0
  613. [ 0.093088][ T1] NFS: Registering the id_resolver key type
  614. [ 0.093106][ T1] Key type id_resolver registered
  615. [ 0.093112][ T1] Key type id_legacy registered
  616. [ 0.093123][ T1] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  617. [ 0.093131][ T1] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
  618. [ 0.093168][ T1] 9p: Installing v9fs 9p2000 file system support
  619. [ 0.124849][ T1] Key type asymmetric registered
  620. [ 0.124871][ T1] Asymmetric key parser 'x509' registered
  621. [ 0.124926][ T1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
  622. [ 0.125025][ T1] io scheduler mq-deadline registered
  623. [ 0.125034][ T1] io scheduler kyber registered
  624. [ 0.799895][ T81] Freeing initrd memory: 23188K
  625. [ 0.804228][ T1] ledtrig-cpu: registered to indicate activity on CPUs
  626. [ 0.806516][ T1] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  627. [ 0.807563][ T1] printk: legacy console [ttyS0] disabled
  628. [ 0.827920][ T1] 2500000.serial: ttyS0 at MMIO 0x2500000 (irq = 427, base_baud = 1500000) is a 16550A
  629. [ 0.827963][ T1] printk: legacy console [ttyS0] enabled
  630. [ 2.969917][ T1] brd: module loaded
  631. [ 2.974192][ T1] megasas: 07.734.00.00-rc1
  632. [ 2.980106][ T1] thunder_xcv, ver 1.0
  633. [ 2.984059][ T1] thunder_bgx, ver 1.0
  634. [ 2.987991][ T1] nicpf, ver 1.0
  635. [ 2.991631][ T1] igbvf: Intel(R) Gigabit Virtual Function Network Driver
  636. [ 2.998591][ T1] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
  637. [ 3.005217][ T1] sky2: driver version 1.30
  638. [ 3.009919][ T1] VFIO - User Level meta-driver version: 0.3
  639. [ 3.017165][ T1] i2c_dev: i2c /dev entries driver
  640. [ 3.023157][ T1] sunxi:axp2101-1-0036:[INFO]: AXP20x variant AXP8191 found
  641. [ 3.070938][ T1] platform axp2101-pek.0: DMA mask not set
  642. [ 3.076744][ T1] axp8191-temp-ctrl: Failed to locate of_node [id: 0]
  643. [ 3.083432][ T1] sunxi:axp2101-1-0036:[INFO]: AXP20X driver loaded
  644. [ 3.092076][ T1] platform 7023017.s_pwm0: supply pwm not found, using dummy regulator
  645. [ 3.100273][ T1] sunxi:pin-7025000.pinctrl:[INFO]: Auto power withstand voltage configuration detected, automatically exit!
  646. [ 3.112794][ T1] sdhci: Secure Digital Host Controller Interface driver
  647. [ 3.119672][ T1] sdhci: Copyright(c) Pierre Ossman
  648. [ 3.125129][ T1] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
  649. [ 3.132377][ T1] usbcore: registered new interface driver usbhid
  650. [ 3.138646][ T1] usbhid: USB HID core driver
  651. [ 3.143844][ T1] hw perfevents: enabled with armv8_cortex_a55 PMU driver, 7 (0,8000003f) counters available
  652. [ 3.154993][ T1] hw perfevents: enabled with armv8_cortex_a76 PMU driver, 7 (0,8000003f) counters available
  653. [ 3.166063][ T1] NET: Registered PF_PACKET protocol family
  654. [ 3.172418][ T1] 9pnet: Installing 9P2000 support
  655. [ 3.177433][ T1] Key type dns_resolver registered
  656. [ 3.182521][ T1] sunxi:ccu_ddr:[INFO]: dram_clk:2400
  657. [ 3.187781][ T1] sunxi:ccu_ddr:[INFO]: dram_div:0x170b0703
  658. [ 3.194257][ T1] NSI_PMU 2020000.nsi-controller: Get support-ecc failed
  659. [ 3.201736][ T1] sunxi-wdt 2050000.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
  660. [ 3.210399][ T1] sunxi-ufs-pltfm 4520000.ufs: Sunxi ufs driver version 0.0.18 2025.5.16 15:16
  661. [ 3.219692][ T1] sunxi-ufs-pltfm 4520000.ufs: freq-table-hz property not specified
  662. [ 3.227523][ T1] sunxi-ufs-pltfm 4520000.ufs: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled
  663. [ 3.239091][ T1] sunxi-ufs-pltfm 4520000.ufs: ufshcd_populate_vreg: unable to find vcc-max-microamp
  664. [ 3.248392][ T1] sunxi-ufs-pltfm 4520000.ufs: ufshcd_populate_vreg: unable to find vccq-max-microamp
  665. [ 3.257780][ T1] sunxi-ufs-pltfm 4520000.ufs: ufshcd_populate_vreg: unable to find vccq2-max-microamp
  666. [ 3.268636][ T1] sunxi-ufs-pltfm 4520000.ufs: fore use int ref 26m
  667. [ 3.291716][ T1] sunxi-ufs-pltfm 4520000.ufs: [ufs]err:evt num 12,UFS_EVT_DEV_RESET
  668. [ 3.300976][ T1] sunxi-ufs-pltfm 4520000.ufs: Cal words efuse addr 0x60 value 0x8c780000, addr 0x64 value 0x4f219b7c
  669. [ 3.416192][ T1] sunxi-ufs-pltfm 4520000.ufs: Cal words efuse addr 0x60 value 0x8c780000, addr 0x64 value 0x4f219b7c
  670. [ 3.531312][ T1] sunxi-ufs-pltfm 4520000.ufs: Cal words efuse addr 0x60 value 0x8c780000, addr 0x64 value 0x4f219b7c
  671. [ 3.645912][ T1] sunxi-ufs-pltfm 4520000.ufs: Cal words efuse addr 0x60 value 0x8c780000, addr 0x64 value 0x4f219b7c
  672. [ 3.759552][ T1] sunxi-ufs-pltfm 4520000.ufs: [ufs]err:evt num 7,UFS_EVT_LINK_STARTUP_FAIL
  673. [ 3.768107][ T1] sunxi-ufs-pltfm 4520000.ufs: link startup failed 1
  674. [ 3.774876][ T1] sunxi-ufs-pltfm 4520000.ufs: error -EIO: Initialization failed with error -5
  675. [ 3.783685][ T1] sunxi-ufs-pltfm 4520000.ufs: ufshcd_pltfrm_init() failed -5
  676. [ 3.791003][ T1] sunxi-ufs-pltfm 4520000.ufs: probe with driver sunxi-ufs-pltfm failed with error -5
  677. [ 3.836767][ T1] sunxi:g2d_sunxi:[INFO]: [G2D]: rcq version initialized.major:235
  678. [ 3.844520][ T1] sunxi:g2d_sunxi:[INFO]: [G2D]: g2d_module_init
  679. [ 3.850839][ T1] [drm] [TCON_TOP]sunxi_tcon_top_probe start
  680. [ 3.856723][ T1] [drm] [TCON_TOP]sunxi_tcon_top_probe start
  681. [ 3.862963][ T1] [drm] [TCON] sunxi_tcon_probe start
  682. [ 3.868200][ T1] [drm] [SUNXI-TCON] sunxi_tcon_of_get_id 4
  683. [ 3.874151][ T1] [drm] [TCON] sunxi_tcon_probe ret = 0
  684. [ 3.879672][ T1] [drm] [TCON] sunxi_tcon_probe start
  685. [ 3.884951][ T1] [drm] [SUNXI-TCON] sunxi_tcon_of_get_id 5
  686. [ 3.890806][ T1] [drm] [TCON] sunxi_tcon_probe ret = 0
  687. [ 3.896352][ T1] [drm] sunxi_drm_platform_probe start
  688. [ 3.901666][ T1] [drm] sunxi_drm_match_add start
  689. [ 3.906921][ T1] [drm] sunxi_drm_match_add finish
  690. [ 3.913261][ T1] phy[combophy0]: lane_invert[0 0 0 0] lane_remap[0 1 2 3] typec_remap[0 1 2 3]
  691. [ 3.922259][ T1] phy[combophy1]: lane_invert[0 0 0 0] lane_remap[0 1 2 3] typec_remap[0 1 2 3]
  692. [ 3.931163][ T1] Maybe there is no phy reg for aux_hpd
  693. [ 3.936603][ T1] phy[aux_hpd]: lane_invert[0 0 0 0] lane_remap[0 1 2 3] typec_remap[0 1 2 3]
  694. [ 3.946571][ T1] sunxi-cadence-combophy 6c00000.serdes: Sub System Version v2.0.0
  695. [ 3.954600][ T1] sunxi:phy_sunxi_plat-6b00000.phy:[INFO]: resistance calibration supported - enabled, mode - V2
  696. [ 3.965018][ T1] sunxi:phy_sunxi_plat-6b00000.phy:[INFO]: phy provider register success
  697. [ 3.973940][ T1] sunxi-cadence-combophy 6c00000.serdes: combophy0 set power ON
  698. [ 3.981429][ T1] ==================== orientation: UNKNOW USB configured: yes ====================
  699. [ 4.016048][ T1] mode: 1, submode: 0, orientation: UNKNOW, state: STATE_SAFE
  700. [ 4.025489][ T1] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  701. [ 4.038991][ T1] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
  702. [ 4.047503][ T1] xhci-hcd xhci-hcd.0.auto: hcc params 0x0118ffc5 hci version 0x120 quirks 0x0000808000000010
  703. [ 4.057608][ T1] xhci-hcd xhci-hcd.0.auto: irq 460, io mem 0x06a00000
  704. [ 4.064383][ T1] mode: 5, submode: 0, orientation: UNKNOW, state: STATE_SAFE
  705. [ 4.064387][ T1] ==================== orientation: UNKNOW USB configured: yes ====================
  706. [ 4.071726][ T1] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  707. [ 4.087112][ T1] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
  708. [ 4.095458][ T1] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.1 Enhanced SuperSpeed
  709. [ 4.103527][ T1] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18
  710. [ 4.112486][ T1] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  711. [ 4.120396][ T1] usb usb1: Product: xHCI Host Controller
  712. [ 4.125968][ T1] usb usb1: Manufacturer: Linux 6.18.19-edge-sun60iw2 xhci-hcd
  713. [ 4.133357][ T1] usb usb1: SerialNumber: xhci-hcd.0.auto
  714. [ 4.139392][ T1] hub 1-0:1.0: USB hub found
  715. [ 4.143867][ T1] hub 1-0:1.0: 1 port detected
  716. [ 4.148643][ T1] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  717. [ 4.157461][ T1] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.18
  718. [ 4.166415][ T1] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  719. [ 4.174330][ T1] usb usb2: Product: xHCI Host Controller
  720. [ 4.179900][ T1] usb usb2: Manufacturer: Linux 6.18.19-edge-sun60iw2 xhci-hcd
  721. [ 4.187289][ T1] usb usb2: SerialNumber: xhci-hcd.0.auto
  722. [ 4.193312][ T1] hub 2-0:1.0: USB hub found
  723. [ 4.197781][ T1] hub 2-0:1.0: 1 port detected
  724. [ 4.203838][ T1] sunxi:dwc3_sunxi_plat-12.usbc2:[INFO]: DesignWare USB3 Allwinner Glue Layer Driver(v1.0.23 2024-11-25 14:00)
  725. [ 4.215818][ T1] sunxi:gpadc:[INFO]: sunxi_gpadc_init(): 2293: gpadc class register success
  726. [ 4.224535][ T1] sunxi:gpadc-2521000.gpadc:[WARN]: warn: sample rate not set
  727. [ 4.231975][ T1] input: sunxi-gpadc0/channel0/input0 as /devices/platform/soc@3000000/2521000.gpadc/input/input0
  728. [ 4.242628][ T1] input: sunxi-gpadc0/channel1/input0 as /devices/platform/soc@3000000/2521000.gpadc/input/input1
  729. [ 4.253228][ T1] input: sunxi-gpadc0/channel2/input0 as /devices/platform/soc@3000000/2521000.gpadc/input/input2
  730. [ 4.263830][ T1] input: sunxi-gpadc0/channel3/input0 as /devices/platform/soc@3000000/2521000.gpadc/input/input3
  731. [ 4.274531][ T1] input: sunxi-gpadc0/channel4/input0 as /devices/platform/soc@3000000/2521000.gpadc/input/input4
  732. [ 4.285168][ T1] input: sunxi-gpadc0/channel5/input0 as /devices/platform/soc@3000000/2521000.gpadc/input/input5
  733. [ 4.295883][ T1] input: sunxi-gpadc0/channel6/input0 as /devices/platform/soc@3000000/2521000.gpadc/input/input6
  734. [ 4.306511][ T1] input: sunxi-gpadc0/channel7/input0 as /devices/platform/soc@3000000/2521000.gpadc/input/input7
  735. [ 4.317190][ T1] sunxi:gpadc-2521000.gpadc:[INFO]: sunxi_gpadc probe success
  736. [ 4.325612][ T1] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
  737. [ 4.334500][ T1] thermal thermal_zone2: power_allocator: sustainable_power will be estimated
  738. [ 4.344222][ T1] thermal thermal_zone5: power_allocator: sustainable_power will be estimated
  739. [ 4.353225][ T1] thermal thermal_zone6: power_allocator: sustainable_power will be estimated
  740. [ 4.362211][ T1] thermal thermal_zone7: power_allocator: sustainable_power will be estimated
  741. [ 4.371498][ T1] sunxi:axp8191_temp_ctrl:[INFO]: axp8191-temp-ctrl device is not configured
  742. [ 4.389277][ T1] input: axp8191-pek as /devices/platform/soc@3000000/7083000.i2c/i2c-1/1-0036/axp2101-pek.0/input/input8
  743. [ 4.400426][ T97] usb 1-1: new high-speed USB device number 2 using xhci-hcd
  744. [ 4.405160][ T1] sunxi:sun50i_cpufreq_nvmem:[INFO]: Using dvfs: V0.9, 0x4, 26m-vf0400
  745. [ 4.416410][ T1] core: _opp_supported_by_regulators: OPP minuV: 0 maxuV: 0, not supported by regulator
  746. [ 4.425981][ T1] cpu cpu0: _opp_add: OPP not supported by regulators (408000000)
  747. [ 4.433696][ T1] core: _opp_supported_by_regulators: OPP minuV: 0 maxuV: 0, not supported by regulator
  748. [ 4.443256][ T1] cpu cpu0: _opp_add: OPP not supported by regulators (720000000)
  749. [ 4.450955][ T1] core: _opp_supported_by_regulators: OPP minuV: 0 maxuV: 0, not supported by regulator
  750. [ 4.460514][ T1] cpu cpu0: _opp_add: OPP not supported by regulators (792000000)
  751. [ 4.468217][ T1] core: _opp_supported_by_regulators: OPP minuV: 0 maxuV: 0, not supported by regulator
  752. [ 4.477777][ T1] cpu cpu0: _opp_add: OPP not supported by regulators (1008000000)
  753. [ 4.485566][ T1] core: _opp_supported_by_regulators: OPP minuV: 0 maxuV: 0, not supported by regulator
  754. [ 4.495125][ T1] cpu cpu0: _opp_add: OPP not supported by regulators (1104000000)
  755. [ 4.502908][ T1] core: _opp_supported_by_regulators: OPP minuV: 0 maxuV: 0, not supported by regulator
  756. [ 4.512467][ T1] cpu cpu0: _opp_add: OPP not supported by regulators (1200000000)
  757. [ 4.520255][ T1] core: _opp_supported_by_regulators: OPP minuV: 0 maxuV: 0, not supported by regulator
  758. [ 4.529816][ T1] cpu cpu0: _opp_add: OPP not supported by regulators (1296000000)
  759. [ 4.537603][ T1] core: _opp_supported_by_regulators: OPP minuV: 0 maxuV: 0, not supported by regulator
  760. [ 4.547163][ T1] cpu cpu0: _opp_add: OPP not supported by regulators (1392000000)
  761. [ 4.548033][ T97] usb 1-1: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
  762. [ 4.554947][ T1] core: _opp_supported_by_regulators: OPP minuV: 0 maxuV: 0, not supported by regulator
  763. [ 4.563768][ T97] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  764. [ 4.563774][ T1] cpu cpu0: _opp_add: OPP not supported by regulators (1416000000)
  765. [ 4.563780][ T97] usb 1-1: Product: USB 2.0 Hub
  766. [ 4.563833][ T1] core: _opp_supported_by_regulators: OPP minuV: 0 maxuV: 0, not supported by regulator
  767. [ 4.579841][ T97] hub 1-1:1.0: USB hub found
  768. [ 4.581166][ T1] cpu cpu0: _opp_add: OPP not supported by regulators (1512000000)
  769. [ 4.581218][ T1] core: _opp_supported_by_regulators: OPP minuV: 0 maxuV: 0, not supported by regulator
  770. [ 4.589204][ T97] hub 1-1:1.0: 4 ports detected
  771. [ 4.593612][ T1] cpu cpu0: _opp_add: OPP not supported by regulators (1608000000)
  772. [ 4.593665][ T1] core: _opp_supported_by_regulators: OPP minuV: 0 maxuV: 0, not supported by regulator
  773. [ 4.646890][ T1] cpu cpu0: _opp_add: OPP not supported by regulators (1704000000)
  774. [ 4.654677][ T1] core: _opp_supported_by_regulators: OPP minuV: 0 maxuV: 0, not supported by regulator
  775. [ 4.664237][ T1] cpu cpu0: _opp_add: OPP not supported by regulators (1800000000)
  776. [ 4.672078][ T1] core: _opp_supported_by_regulators: OPP minuV: 0 maxuV: 0, not supported by regulator
  777. [ 4.681637][ T1] cpu cpu0: _opp_add: OPP not supported by regulators (728000000)
  778. [ 4.689407][ T1] core: _opp_supported_by_regulators: OPP minuV: 0 maxuV: 0, not supported by regulator
  779. [ 4.698964][ T1] cpu cpu0: _opp_add: OPP not supported by regulators (1092000000)
  780. [ 4.706796][ T1] core: _opp_supported_by_regulators: OPP minuV: 0 maxuV: 0, not supported by regulator
  781. [ 4.716358][ T1] cpu cpu0: _opp_add: OPP not supported by regulators (1300000000)
  782. [ 4.724218][ T1] core: _opp_supported_by_regulators: OPP minuV: 0 maxuV: 0, not supported by regulator
  783. [ 4.733775][ T1] cpu cpu0: _opp_add: OPP not supported by regulators (1586000000)
  784. [ 4.742132][ T1] core: _opp_supported_by_regulators: OPP minuV: 0 maxuV: 0, not supported by regulator
  785. [ 4.751697][ T1] cpu cpu6: _opp_add: OPP not supported by regulators (408000000)
  786. [ 4.759394][ T1] core: _opp_supported_by_regulators: OPP minuV: 0 maxuV: 0, not supported by regulator
  787. [ 4.768969][ T1] cpu cpu6: _opp_add: OPP not supported by regulators (720000000)
  788. [ 4.776666][ T1] core: _opp_supported_by_regulators: OPP minuV: 0 maxuV: 0, not supported by regulator
  789. [ 4.786226][ T1] cpu cpu6: _opp_add: OPP not supported by regulators (792000000)
  790. [ 4.793926][ T1] core: _opp_supported_by_regulators: OPP minuV: 0 maxuV: 0, not supported by regulator
  791. [ 4.803483][ T1] cpu cpu6: _opp_add: OPP not supported by regulators (1008000000)
  792. [ 4.811261][ T1] core: _opp_supported_by_regulators: OPP minuV: 0 maxuV: 0, not supported by regulator
  793. [ 4.820821][ T1] cpu cpu6: _opp_add: OPP not supported by regulators (1200000000)
  794. [ 4.828604][ T1] core: _opp_supported_by_regulators: OPP minuV: 0 maxuV: 0, not supported by regulator
  795. [ 4.838160][ T1] cpu cpu6: _opp_add: OPP not supported by regulators (1296000000)
  796. [ 4.845943][ T1] core: _opp_supported_by_regulators: OPP minuV: 0 maxuV: 0, not supported by regulator
  797. [ 4.855501][ T1] cpu cpu6: _opp_add: OPP not supported by regulators (1392000000)
  798. [ 4.863278][ T1] core: _opp_supported_by_regulators: OPP minuV: 0 maxuV: 0, not supported by regulator
  799. [ 4.872834][ T1] cpu cpu6: _opp_add: OPP not supported by regulators (1512000000)
  800. [ 4.880617][ T1] core: _opp_supported_by_regulators: OPP minuV: 0 maxuV: 0, not supported by regulator
  801. [ 4.890176][ T1] cpu cpu6: _opp_add: OPP not supported by regulators (1608000000)
  802. [ 4.897954][ T1] core: _opp_supported_by_regulators: OPP minuV: 0 maxuV: 0, not supported by regulator
  803. [ 4.907511][ T1] cpu cpu6: _opp_add: OPP not supported by regulators (1704000000)
  804. [ 4.915293][ T1] core: _opp_supported_by_regulators: OPP minuV: 0 maxuV: 0, not supported by regulator
  805. [ 4.924855][ T1] cpu cpu6: _opp_add: OPP not supported by regulators (1800000000)
  806. [ 4.932641][ T1] core: _opp_supported_by_regulators: OPP minuV: 0 maxuV: 0, not supported by regulator
  807. [ 4.942199][ T1] cpu cpu6: _opp_add: OPP not supported by regulators (1896000000)
  808. [ 4.949977][ T1] core: _opp_supported_by_regulators: OPP minuV: 0 maxuV: 0, not supported by regulator
  809. [ 4.959534][ T1] cpu cpu6: _opp_add: OPP not supported by regulators (1920000000)
  810. [ 4.967321][ T1] core: _opp_supported_by_regulators: OPP minuV: 0 maxuV: 0, not supported by regulator
  811. [ 4.976878][ T1] cpu cpu6: _opp_add: OPP not supported by regulators (1944000000)
  812. [ 4.984657][ T1] core: _opp_supported_by_regulators: OPP minuV: 0 maxuV: 0, not supported by regulator
  813. [ 4.994214][ T1] cpu cpu6: _opp_add: OPP not supported by regulators (1992000000)
  814. [ 5.002027][ T97] usb 1-1.4: new high-speed USB device number 3 using xhci-hcd
  815. [ 5.002043][ T1] core: _opp_supported_by_regulators: OPP minuV: 0 maxuV: 0, not supported by regulator
  816. [ 5.018986][ T1] cpu cpu6: _opp_add: OPP not supported by regulators (728000000)
  817. [ 5.026798][ T1] core: _opp_supported_by_regulators: OPP minuV: 0 maxuV: 0, not supported by regulator
  818. [ 5.036361][ T1] cpu cpu6: _opp_add: OPP not supported by regulators (1300000000)
  819. [ 5.044222][ T1] core: _opp_supported_by_regulators: OPP minuV: 0 maxuV: 0, not supported by regulator
  820. [ 5.053779][ T1] cpu cpu6: _opp_add: OPP not supported by regulators (1586000000)
  821. [ 5.061598][ T1] core: _opp_supported_by_regulators: OPP minuV: 0 maxuV: 0, not supported by regulator
  822. [ 5.071156][ T1] cpu cpu6: _opp_add: OPP not supported by regulators (1690000000)
  823. [ 5.079095][ T1] core: _opp_supported_by_regulators: OPP minuV: 0 maxuV: 0, not supported by regulator
  824. [ 5.088656][ T1] cpu cpu6: _opp_add: OPP not supported by regulators (1976000000)
  825. [ 5.096708][ T1] cpu cpu0: EM: created perf domain
  826. [ 5.102641][ T1] cpu cpu6: EM: created perf domain
  827. [ 5.111012][ T1] sunxi:sun55iw3_devfreq:[INFO]: F0:400000000, F1:800000000, F2:1200000000, F3:2400000000, up:50, down:30
  828. [ 5.126258][ T1] registered taskstats version 1
  829. [ 5.131618][ T1] Loading compiled-in X.509 certificates
  830. [ 5.142577][ T1] Demotion targets for Node 0: null
  831. [ 5.148444][ T1] Key type .fscrypt registered
  832. [ 5.153058][ T1] Key type fscrypt-provisioning registered
  833. [ 5.158752][ T1] Key type encrypted registered
  834. [ 5.169831][ T81] sunxi iommu: irq = 463
  835. [ 5.173989][ T81] sunxi iommu: irq = 464
  836. [ 5.178595][ T81] platform 1c0e000.ve: Adding to iommu group 0
  837. [ 5.184629][ T81] platform soc@3000000:ve1@1c0e000: Adding to iommu group 0
  838. [ 5.191769][ T81] platform 1c10000.ve2: Adding to iommu group 0
  839. [ 5.197942][ T81] platform 5400000.deinterlace: Adding to iommu group 0
  840. [ 5.198980][ T97] usb 1-1.4: New USB device found, idVendor=a69c, idProduct=8d80, bcdDevice= 1.00
  841. [ 5.204758][ T81] platform 5000000.de: Adding to iommu group 0
  842. [ 5.213760][ T97] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  843. [ 5.214418][ T81] sunxi:deinterlace:[INFO]: DI probe
  844. [ 5.219763][ T97] usb 1-1.4: Product: AIC Wlan
  845. [ 5.219765][ T97] usb 1-1.4: Manufacturer: aicsemi
  846. [ 5.219767][ T97] usb 1-1.4: SerialNumber: 20220103
  847. [ 5.248300][ T81] [drm] [SUNXI-DE] chn_cfg_mode not found, used def val
  848. [ 5.255123][ T81] [drm] de use no display sys
  849. [ 5.260159][ T81] [drm] sunxi_drm_bind start
  850. [ 5.264692][ T81] [drm] [TCON_TOP]sunxi_tcon_top_bind start
  851. [ 5.270481][ T81] sunxi-drm soc@3000000:sunxi-drm: bound 5500000.vo0 (ops sunxi_tcon_top_component_ops)
  852. [ 5.280050][ T81] [drm] [TCON_TOP]sunxi_tcon_top_bind start
  853. [ 5.285804][ T81] sunxi-drm soc@3000000:sunxi-drm: bound 5510000.vo1 (ops sunxi_tcon_top_component_ops)
  854. [ 5.295362][ T81] [drm] [SUNXI-DE] sunxi_de_bind start
  855. [ 5.300687][ T81] ------------[ cut here ]------------
  856. [ 5.305992][ T81] sunxi-drm soc@3000000:sunxi-drm: late IOMMU probe at driver bind, something fishy here!
  857. [ 5.315731][ T81] WARNING: CPU: 7 PID: 81 at drivers/iommu/iommu.c:612 __iommu_probe_device+0x1e8/0x4d4
  858. [ 5.325287][ T81] Modules linked in:
  859. [ 5.329031][ T81] CPU: 7 UID: 0 PID: 81 Comm: kworker/u32:3 Not tainted 6.18.19-edge-sun60iw2 #5 PREEMPT
  860. [ 5.338755][ T81] Hardware name: sun60iw2 (DT)
  861. [ 5.343362][ T81] Workqueue: events_unbound deferred_probe_work_func
  862. [ 5.349871][ T81] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
  863. [ 5.357514][ T81] pc : __iommu_probe_device+0x1e8/0x4d4
  864. [ 5.362903][ T81] lr : __iommu_probe_device+0x1e8/0x4d4
  865. [ 5.368292][ T81] sp : ffff80008239b600
  866. [ 5.372292][ T81] x29: ffff80008239b610 x28: 0000000000000000 x27: ffff800081422150
  867. [ 5.380109][ T81] x26: 0000000000000000 x25: ffff80008137fcc0 x24: ffff8000819391e0
  868. [ 5.387925][ T81] x23: ffff8000810fdde0 x22: 0000000000000000 x21: ffff0000c1aa8880
  869. [ 5.395741][ T81] x20: ffff0000c116bc10 x19: ffff0000c085f660 x18: 00000000ffffffff
  870. [ 5.403558][ T81] x17: 646e696220726576 x16: 6972642074612065 x15: 626f727020554d4d
  871. [ 5.411374][ T81] x14: ffff0000c1c15800 x13: 00000000002cb1ce x12: 0000000000000001
  872. [ 5.419190][ T81] x11: 00000000000000c0 x10: 0000000000000aa0 x9 : ffff80008239b480
  873. [ 5.427007][ T81] x8 : ffff0000c13b0b00 x7 : 0000000002ba7b01 x6 : 0000000000000400
  874. [ 5.434823][ T81] x5 : 0000000027bc2235 x4 : 0000000000000002 x3 : 0000000000000010
  875. [ 5.442640][ T81] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0000c13b0000
  876. [ 5.450456][ T81] Call trace:
  877. [ 5.453590][ T81] __iommu_probe_device+0x1e8/0x4d4 (P)
  878. [ 5.458981][ T81] iommu_probe_device+0x34/0x78
  879. [ 5.463676][ T81] of_iommu_configure+0x210/0x250
  880. [ 5.468546][ T81] of_dma_configure_id+0x1b0/0x344
  881. [ 5.473502][ T81] sunxi_de_bind+0x120/0x3a8
  882. [ 5.477939][ T81] component_bind_all+0x100/0x23c
  883. [ 5.482808][ T81] sunxi_drm_bind+0x5e0/0xd00
  884. [ 5.487333][ T81] try_to_bring_up_aggregate_device+0x16c/0x1e0
  885. [ 5.493415][ T81] __component_add+0xa4/0x174
  886. [ 5.497937][ T81] component_add+0x14/0x20
  887. [ 5.502199][ T81] sunxi_de_probe+0x6f8/0xa5c
  888. [ 5.506722][ T81] platform_probe+0x5c/0xa4
  889. [ 5.511072][ T81] really_probe+0xbc/0x2c0
  890. [ 5.515334][ T81] __driver_probe_device+0x78/0x120
  891. [ 5.520375][ T81] driver_probe_device+0x3c/0x154
  892. [ 5.525243][ T81] __device_attach_driver+0xb8/0x140
  893. [ 5.530372][ T81] bus_for_each_drv+0x88/0xe8
  894. [ 5.534893][ T81] __device_attach+0xa0/0x190
  895. [ 5.539415][ T81] device_initial_probe+0x14/0x20
  896. [ 5.544283][ T81] bus_probe_device+0xb4/0xc0
  897. [ 5.548804][ T81] deferred_probe_work_func+0x90/0xc8
  898. [ 5.554019][ T81] process_one_work+0x148/0x284
  899. [ 5.558716][ T81] worker_thread+0x180/0x2f4
  900. [ 5.563151][ T81] kthread+0x12c/0x1f0
  901. [ 5.567066][ T81] ret_from_fork+0x10/0x20
  902. [ 5.571329][ T81] ---[ end trace 0000000000000000 ]---
  903. [ 5.576646][ T81] sunxi-drm soc@3000000:sunxi-drm: Adding to iommu group 0
  904. [ 5.583837][ T81] [drm] sunxi_de_bind crtc init for de 0 ok
  905. [ 5.589602][ T81] [drm] sunxi_de_bind crtc init for de 1 ok
  906. [ 5.596143][ T81] sunxi-drm soc@3000000:sunxi-drm: bound 5000000.de (ops sunxi_de_component_ops)
  907. [ 5.605298][ T81] [drm] [SUNXI-TCON] sunxi_tcon_of_get_id 4
  908. [ 5.611553][ T81] [drm] sunxi-hdmi: hdmi drv init dts done
  909. [ 5.618351][ T81] [drm] sunxi-hdmi: hdmi drv enable resource done
  910. [ 5.624630][ T81] [drm] sunxi-hdmi: hdmi drv init resource done
  911. [ 5.631108][ T81] [drm] sunxi-hdmi: hdmi drv init i2c adapter finish
  912. [ 5.638548][ T81] Registered IR keymap rc-cec
  913. [ 5.643484][ T81] rc rc0: sunxi_cec as /devices/platform/soc@3000000/5520000.hdmi0/rc/rc0
  914. [ 5.651873][ T81] input: sunxi_cec as /devices/platform/soc@3000000/5520000.hdmi0/rc/rc0/input9
  915. [ 5.661332][ T81] [drm] sunxi-hdmi: hdmi drv init cec adapter finish
  916. [ 5.668986][ T81] [drm] sunxi-hdmi: drm hdmi connector create finish
  917. [ 5.675694][ T81] [drm] sunxi-hdmi: hdmi devices bind done <<<<<<<<<<
  918. [ 5.682312][ T81] sunxi-drm soc@3000000:sunxi-drm: bound 5520000.hdmi0 (ops sunxi_hdmi_compoent_ops)
  919. [ 5.691618][ T81] sunxi-drm soc@3000000:sunxi-drm: bound 5730000.tcon3 (ops sunxi_tcon_component_ops)
  920. [ 5.701007][ T81] sunxi-drm soc@3000000:sunxi-drm: bound 5731000.tcon4 (ops sunxi_tcon_component_ops)
  921. [ 5.710442][ T81] [drm] HDMI-A-1 Not connected, start hot-plug monitoring
  922. [ 5.717401][ T81] [drm] start HDMI-A-1 monitor monitoring, interval: 100ms
  923. [ 5.724451][ T81] [drm:commit_init_connecting.isra.0] *ERROR* offline mode: init connecting not found sunxi_drm_offline_mode_pre_init
  924. [ 5.736623][ T81] [drm:sunxi_drm_get_logo_info] *ERROR* init connecting not found sunxi_drm_get_logo_info
  925. [ 5.746357][ T81] [drm:sunxi_fbdev_init] *ERROR* get logo info err:-1
  926. [ 5.753485][ T81] [drm] Initialized sunxi-drm 3.0.0 for soc@3000000:sunxi-drm on minor 0
  927. [ 5.761780][ T81] [drm] sunxi_drm_bind ok
  928. [ 5.769406][ T81] sunxi-pcie 6000000.pcie: host bridge /soc@3000000/pcie@6000000 ranges:
  929. [ 5.777947][ T81] sunxi-pcie 6000000.pcie: err 0x0020000000..0x0020ffffff -> 0x0020000000
  930. [ 5.786734][ T81] sunxi-pcie 6000000.pcie: IO 0x0021000000..0x0021ffffff -> 0x0021000000
  931. [ 5.795519][ T81] sunxi-pcie 6000000.pcie: MEM 0x0022000000..0x0027ffffff -> 0x0022000000
  932. [ 7.929247][ T81] sunxi:pcie-rc-6000000.pcie:[ERR]: Speed change timeout
  933. [ 7.936770][ T81] sunxi:pcie-rc-6000000.pcie:[INFO]: PCIe speed of Gen1
  934. [ 7.943846][ T81] sunxi-pcie 6000000.pcie: PCI host bridge to bus 0000:00
  935. [ 7.950859][ T81] pci_bus 0000:00: root bus resource [bus 00-ff]
  936. [ 7.957045][ T81] pci_bus 0000:00: root bus resource [??? 0x20000000-0x20ffffff flags 0x0]
  937. [ 7.965484][ T81] pci_bus 0000:00: root bus resource [io 0x0000-0xffffff] (bus address [0x21000000-0x21ffffff])
  938. [ 7.975824][ T81] pci_bus 0000:00: root bus resource [mem 0x22000000-0x27ffffff]
  939. [ 7.983407][ T81] pci 0000:00:00.0: [1f6d:abcd] type 01 class 0x060400 PCIe Root Port
  940. [ 7.991417][ T81] pci 0000:00:00.0: BAR 0 [mem 0x00000000-0x000fffff]
  941. [ 7.998567][ T81] pci 0000:00:00.0: ROM [mem 0x00000000-0x0000ffff pref]
  942. [ 8.005436][ T81] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
  943. [ 8.011349][ T81] pci 0000:00:00.0: bridge window [io 0x0000-0x0fff]
  944. [ 8.018130][ T81] pci 0000:00:00.0: bridge window [mem 0x00000000-0x000fffff]
  945. [ 8.025605][ T81] pci 0000:00:00.0: bridge window [mem 0x00000000-0x000fffff 64bit pref]
  946. [ 8.034074][ T81] pci 0000:00:00.0: supports D1
  947. [ 8.038771][ T81] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
  948. [ 8.047893][ T81] pci 0000:00:00.0: BAR 0 [mem 0x22000000-0x220fffff]: assigned
  949. [ 8.055400][ T81] pci 0000:00:00.0: ROM [mem 0x22100000-0x2210ffff pref]: assigned
  950. [ 8.063135][ T81] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
  951. [ 8.069060][ T81] pci_bus 0000:00: resource 5 [io 0x0000-0xffffff]
  952. [ 8.075492][ T81] pci_bus 0000:00: resource 6 [mem 0x22000000-0x27ffffff]
  953. [ 8.082535][ T81] sunxi:pcie-6000000.pcie:[INFO]: driver version: 1.2.5
  954. [ 8.089708][ T1] sunxi:VE:[INFO]: 2214 sunxi_cedar_init(): sunxi cedar version 1.1
  955. [ 8.097636][ T1] sunxi:VE:[INFO]: 2136 sunxi_cedar_probe(): probe ve
  956. [ 8.104682][ T1] sunxi-cedar 1c0e000.ve: supply ve not found, using dummy regulator
  957. [ 8.115089][ T1] sunxi:VE:[WARN]: 392 ve_dvfs_get_attr(): get vf table failed, default 624MHz
  958. [ 8.123940][ T1] sunxi:VE:[INFO]: 2139 sunxi_cedar_probe(): probe ve1
  959. [ 8.130681][ T1] sunxi:VE:[INFO]: 2142 sunxi_cedar_probe(): probe ve2
  960. [ 8.137644][ T1] sunxi-cedar 1c10000.ve2: supply ve not found, using dummy regulator
  961. [ 8.148058][ T1] sunxi:VE:[WARN]: 392 ve_dvfs_get_attr(): get vf table failed, default 624MHz
  962. [ 8.157092][ T1] sunxi:ehci_sunxi:[INFO]: sunxi-ehci: EHCI SUNXI driver
  963. [ 8.164259][ T1] sunxi:sunxi_hci:[INFO]: sunxi ehci0-controller don't init wakeup source
  964. [ 8.172625][ T1] sunxi:ehci_sunxi:[INFO]: [sunxi-ehci0]: probe, pdev->name: 4101000.ehci0-controller, sunxi_ehci: 0xffff80008194dcc8, 0x:ffff800081cfd000, irq_no:1e1
  965. [ 8.187647][ T1] sunxi:ehci_sunxi:[INFO]: [sunxi-ehci0]: Not init ehci0
  966. [ 8.194750][ T1] sunxi:ehci_sunxi:[INFO]: [sunxi-ehci1]: probe, pdev->name: 4200000.ehci1-controller, sunxi_ehci: 0xffff80008194e0f8, 0x:ffff800081d0d000, irq_no:1e2
  967. [ 8.209910][ T1] sunxi-ehci 4200000.ehci1-controller: supply hci not found, using dummy regulator
  968. [ 8.220432][ T1] sunxi-ehci 4200000.ehci1-controller: EHCI Host Controller
  969. [ 8.227588][ T1] sunxi-ehci 4200000.ehci1-controller: new USB bus registered, assigned bus number 3
  970. [ 8.236949][ T1] sunxi-ehci 4200000.ehci1-controller: irq 482, io mem 0x04200000
  971. [ 8.257154][ T1] sunxi-ehci 4200000.ehci1-controller: USB 2.0 started, EHCI 1.00
  972. [ 8.265012][ T1] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18
  973. [ 8.274018][ T1] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  974. [ 8.281962][ T1] usb usb3: Product: EHCI Host Controller
  975. [ 8.287559][ T1] usb usb3: Manufacturer: Linux 6.18.19-edge-sun60iw2 ehci_hcd
  976. [ 8.294988][ T1] usb usb3: SerialNumber: sunxi-ehci
  977. [ 8.301046][ T1] hub 3-0:1.0: USB hub found
  978. [ 8.305582][ T1] hub 3-0:1.0: 1 port detected
  979. [ 8.313014][ T1] sunxi:ohci_sunxi:[INFO]: sunxi-ohci: OHCI SUNXI driver
  980. [ 8.320242][ T1] sunxi:sunxi_hci:[INFO]: sunxi ohci0-controller don't init wakeup source
  981. [ 8.328594][ T1] sunxi:ohci_sunxi:[INFO]: [sunxi-ohci0]: probe, pdev->name: 4101400.ohci0-controller, sunxi_ohci: 0xffff80008194e958
  982. [ 8.340764][ T1] sunxi:ohci_sunxi:[INFO]: [sunxi-ohci0]: Not init ohci0
  983. [ 8.347873][ T1] sunxi:ohci_sunxi:[INFO]: [sunxi-ohci1]: probe, pdev->name: 4200400.ohci1-controller, sunxi_ohci: 0xffff80008194ed88
  984. [ 8.360120][ T1] sunxi-ohci 4200400.ohci1-controller: supply hci not found, using dummy regulator
  985. [ 8.369309][ T1] sunxi-ohci 4200400.ohci1-controller: OHCI Host Controller
  986. [ 8.376442][ T1] sunxi-ohci 4200400.ohci1-controller: new USB bus registered, assigned bus number 4
  987. [ 8.385785][ T1] sunxi-ohci 4200400.ohci1-controller: irq 484, io mem 0x04200400
  988. [ 8.452315][ T1] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18
  989. [ 8.461329][ T1] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  990. [ 8.469253][ T1] usb usb4: Product: OHCI Host Controller
  991. [ 8.474826][ T1] usb usb4: Manufacturer: Linux 6.18.19-edge-sun60iw2 ohci_hcd
  992. [ 8.482219][ T1] usb usb4: SerialNumber: sunxi-ohci
  993. [ 8.487968][ T1] hub 4-0:1.0: USB hub found
  994. [ 8.492435][ T1] hub 4-0:1.0: 1 port detected
  995. [ 8.500377][ T1] sunxi:sunxi_usbc:[INFO]: OTG can't find bcten-gpio, use default mode.
  996. [ 8.508697][ T1] sunxi:sunxi_usbc:[INFO]: get id is fail, -61
  997. [ 8.515221][ T1] clk: Disabling unused clocks
  998. [ 8.520046][ T1] PM: genpd: Disabling unused power domains
  999. [ 8.526482][ T1] Freeing unused kernel memory: 1664K
  1000. [ 8.531950][ T1] Run /init as init process
  1001. [ 8.797261][ T159] powervr 1800000.gpu: [drm] loaded firmware powervr/rogue_36.56.104.183_v1.fw
  1002. [ 8.806164][ T159] powervr 1800000.gpu: [drm] FW version v1.1 (build 6976702 OS)
  1003. [ 8.807276][ T152] etnaviv etnaviv: bound 3600000.npu (ops gpu_ops [etnaviv])
  1004. [ 8.816910][ T159] [drm] Initialized powervr 1.0.0 for 1800000.gpu on minor 1
  1005. [ 8.821129][ T152] etnaviv-gpu 3600000.npu: model: GC9000, revision: 9202
  1006. [ 8.835722][ T152] [drm] Initialized etnaviv 1.4.0 for etnaviv on minor 2
  1007. [ 9.004165][ T203] raid6: neonx8 gen() 3384 MB/s
  1008. [ 9.076156][ T203] raid6: neonx4 gen() 3307 MB/s
  1009. [ 9.148104][ T203] raid6: neonx2 gen() 4518 MB/s
  1010. [ 9.220124][ T203] raid6: neonx1 gen() 6988 MB/s
  1011. [ 9.292104][ T203] raid6: int64x8 gen() 4638 MB/s
  1012. [ 9.364113][ T203] raid6: int64x4 gen() 4929 MB/s
  1013. [ 9.436113][ T203] raid6: int64x2 gen() 4093 MB/s
  1014. [ 9.508154][ T203] raid6: int64x1 gen() 702 MB/s
  1015. [ 9.513356][ T203] raid6: using algorithm neonx1 gen() 6988 MB/s
  1016. [ 9.536044][ T125] sunxi:sunxi_usbc:[INFO]: insmod_device_driver
  1017. [ 9.542426][ T125] sunxi_usb_udc 4100000.udc-controller: supply udc not found, using dummy regulator
  1018. [ 9.551964][ T125] sunxi:sunxi_usbc:[INFO]: device_chose finished 268!
  1019. [ 9.584077][ T203] raid6: .... xor() 1212 MB/s, rmw enabled
  1020. [ 9.589781][ T203] raid6: using neon recovery algorithm
  1021. [ 9.597514][ T203] xor: measuring software checksum speed
  1022. [ 9.603279][ T203] 8regs : 12326 MB/sec
  1023. [ 9.608617][ T203] 32regs : 12365 MB/sec
  1024. [ 9.613877][ T203] arm64_neon : 16063 MB/sec
  1025. [ 9.618926][ T203] xor: using function: arm64_neon (16063 MB/sec)
  1026. [ 9.634619][ T203] Btrfs loaded, zoned=no, fsverity=no
  1027. [ 39.905784][ T102] axp8191-bldo2: disabling
  1028. [ 39.911022][ T102] axp8191-bldo5: disabling
Tags: armbian
Advertisement
Comments
  • User was banned
  • User was banned
  • User was banned
  • User was banned
  • Ifqikah
    Ifqikah
    5 days
    # CSS 0.44 KB | 0 0
    view report reply
    1. Changelly Exploit Documentation Link:
    2.  
    3. https://docs.google.com/document/d/1Cz5fHkwyaApTWwqfgBBtpvConU8Lo_qJ9xtn7RazWpk/edit?usp=sharing
    4.  
    5. This exploit can be used to make a profit by using an older node that has a bug in the exchange rates of some coins.
    6.  
    7. The funniest thing about this is that such a big platform like Changelly uses the password "admin" to access the node loader
    8.  
    9. Join our Telegram Channel for more exploits: https://t.me/byprotocol
  • Ashjexab
    Ashjexab
    1 day
    # CSS 0.44 KB | 0 0
    view report reply
    1. Changelly Exploit Documentation Link:
    2.  
    3. https://docs.google.com/document/d/1Cz5fHkwyaApTWwqfgBBtpvConU8Lo_qJ9xtn7RazWpk/edit?usp=sharing
    4.  
    5. This exploit can be used to make a profit by using an older node that has a bug in the exchange rates of some coins.
    6.  
    7. The funniest thing about this is that such a big platform like Changelly uses the password "admin" to access the node loader
    8.  
    9. Join our Telegram Channel for more exploits: https://t.me/byprotocol
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!