View difference between Paste ID: urx0q9if and QjaBHztp

 #!/bin/bash
-# Date 12:00 - 4-sep ### 102
+# Date 12:00 - 4-sep
 # nvOC v0019 by fullzero
 
 # + contributors:
 
 # BaliMiner: BaliMiner_TELEGRAM_ALERTS
 # BaliMiner BTC address:  1HbzxQ6AVeWYvFm322KtxZcJJLAqfJHpN8
 
 # IAmNotAJeep: IAmNotAJeep_and_Maxximus007_WATCHDOG
 #              Methods for improved system stability
 # IAmNotAJeep BTC address:  13PnEKpfVzNseWkrm6LoueKcCMPj74zPv7
 
 # lost_post: upPASTE (timeout based _Pahttps://pastebin.com/edit/QjaBHztprallax_ Mode auto-updating)
 #            Methods for separating settings and implementation
 #            Methods for AUTO_UPDATE
 # lost_post BTC address:  1GFTEtLLvvwoa4ogDntD5oaXBgJLYokzTC
 
 # Maxximus007: Maxximus007_AUTO_TEMPERATURE_CONTROL
 #              Expectless 1bash
 #	       IAmNotAJeep_and_Maxximus007_WATCHDOG
 # Maxximus007 BTC address:  1JAFefdPVAs3WQiTqnYWbsjifJAEjQcjQ8
 
 # _Parallax_:  _Parallax_ Mode ( wget + pastebin oneBash updating )
 #              Methods for image size reduction
 #              Methods for logging and system enhancements (with next version)
 # _Parallax_ BTC address:  329k8rDgxHHcHAEXfwznqv25Go5LERGWLp
 
 # salfter: SALFTER_NICEHASH_PROFIT_SWITCHING
 #          SALFTER_MPH_PROFIT_SWITCHING
 # salfter BTC address:  1TipsGocnz2N5qgAm9f7JLrsMqkb3oXe2
 
 # xleejohnx: SRR support
 # xleejohnx BTC address:  1EY5WbiW3YkWanSKEGcjCETpQfCR81wc56
 
 # Open a terminal to launch miner; will auto launch on boot
 
 # firefox has an OP bookmark; look at the OP for more information
 
 # USE ALL CAPS
 
 # CHOOSE COIN FROM:
 
 # XMR  SIGT   UBQ   ONION DMD  GRS
 # ZPOOL_SKUNK ZPOOL_LYRA2V2  ZPOOL_BLAKE2S  ZPOOL_EQUIHASH ZPOOL_NEOSCRYPT
 # ZPOOL_LBC
 # MPH_EQUIHASH
-# ZEC  ZCOIN  HUSH  ZEN  ZCL  KMD
+# ZEC  ZCOIN  HUSH  ZEN  ZCL  KMD
-# NICE_ETHASH  ETH    MUSIC  ETC  EXP  DCR  PASC
+# NICE_ETHASH  ETH    MUSIC  ETC  EXP  DCR  PASC
 # MONA  VTC    DGB    SIA  FTC  LBC
 # DUAL_ETC_DCR    DUAL_ETC_PASC    DUAL_ETC_LBC    DUAL_ETC_SC
 # DUAL_EXP_DCR    DUAL_EXP_PASC    DUAL_EXP_LBC    DUAL_EXP_SC
 # DUAL_ETH_DCR    DUAL_ETH_PASC    DUAL_ETH_LBC    DUAL_ETH_SC
 # DUAL_MUSIC_DCR  DUAL_MUSIC_PASC  DUAL_MUSIC_LBC  DUAL_MUSIC_SC
 # SALFTER_NICEHASH_PROFIT_SWITCHING
 # SALFTER_MPH_PROFIT_SWITCHING
 
 COIN="ZPOOL_NEOSCRYPT"
 
 Maxximus007_AUTO_TEMPERATURE_CONTROL="YES"
 
 IAmNotAJeep_and_Maxximus007_WATCHDOG="YES"
 
 # LOCAL will attach the mining process to the gnome or guake terminal
 # REMOTE will leave it unattached / ready for SSH
 LOCALorREMOTE="REMOTE"          # LOCAL  or  REMOTE
 
 TEAMVIEWER="NO"                 # YES NO
 
 SSH="YES"                       # YES NO
 
 POWERLIMIT="YES"              	# YES NO
 
 
 #OC_ZEC
 #	POWERLIMIT_WATTS=140
 #__CORE_OVERCLOCK=150
 #MEMORY_OVERCLOCK=800
 
 #OC
 	POWERLIMIT_WATTS=130
 __CORE_OVERCLOCK=150
 MEMORY_OVERCLOCK=100
 
 MANUAL_FAN="NO"             	# YES NO
 
 	FAN_SPEED=75                    # Set fan speed if MANUAL_FAN="YES"
 
 # GLOBAL_WORKERNAME will use a single worker name for all coins
 GLOBAL_WORKERNAME="YES"         # YES NO
 
 	# HOST will use the rigs host address
 	# MAC will use the rigs NIC's MAC address
 	# CUSTOM will use your own
 	AUTO_WORKERNAME="HOST"         # HOST  or  MAC  or  CUSTOM
 
 	# if AUTO_WORKERNAME="CUSTOM"
 	CUSTOM_WORKERNAME="nvOC_v0019"
 
 # AUTO_UPDATE will enable your rig to pull updates
 AUTO_UPDATE="NO"                # YES NO
 
 	# BETA will pull the newest unverified updates
 	# STABLE will only pull verified updates
 	AUTO_UPDATE="STABLE"         # STABLE  or  BETA
 
 	AUTO_UPDATE_TIMEOUT_IN_MINUTES=1440
 
 _Parallax_MODE="YES"             # YES NO
 
 	pasteBASH="0KUW3Cpn"  #change for v0019
 
 	upPASTE_TIMEOUT_IN_MINUTES=30
 
 CLEAR_LOGS_ON_BOOT="YES"        # YES NO
 
 BaliMiner_TELEGRAM_ALERTS="YES"           # YES NO
 # ensure IAmNotAJeep_and_Maxximus007_WATCHDOG is set to "YES" if using TELEGRAM_ALERTS to ensure reboot telegrams
 # use BotFather ( https://core.telegram.org/bots/api ) to make a new bot and get a CHATID and APIKEY
 # BaliMiner is going to make a Guide (+ hopefully a video demonstrating how to set this up; it is not as straightforward as I expected it to be; but it is worth the time to have Telegram Alerts)
 
 	TELEGRAM_TIMEOUT_IN_MINUTES=30
 
 	TELEGRAM_CHATID="97994046"
 
 	TELEGRAM_APIKEY="408504581:AAHen-E4peZrlVhJx-GlnADyiVDgGiR4O8g"
 
     TELEGRAM_ALERT_APIKEY="439775621:AAGVlXtdkaD8B-TQmsSo6N4oQME6qHPO3t4"
 
 
 
 # Mine XMR with CPU
 plusCPU="NO"		        # YES NO
 
 	threadCOUNT="1"                 # Number of threads for plusCPU: varies per CPU
 
 P106_100_FULL_HEADLESS_MODE="NO"
 
 AUTO_REBOOT="NO"
 
 	REBOOT_TIMEOUT_IN_MINUTES=1440  # once every 24 hours
 
 # If you are using a slow USB Key
 SLOW_USB_KEY_MODE="NO"        	# YES NO
 
 GPUPowerMizerMode_Adjust="YES"
 
 	# Set PowerMizerMode
 	GPUPowerMizerMode=2
 
 SRR="NO"                        # YES NO
 	SRR_SERIAL="000055"
 	__SRR_SLOT="1"
 
 
 #######################################################################################
 
 # Maxximus007_AUTO_TEMPERATURE_CONTROL
 
 # Set the target temperature; Recommended ranges: 55 - 75.  Don't set it too low, if the temperature can't be reached with fan adjustments it will decrease power.  If the actual temp is above the target temp this script will up the fan speed.  If actual temp is above value set above and fan speed is 100, the script will lower the power limit.
 
 TARGET_TEMP=70
 
 __FAN_ADJUST=5      # Adjustment size in percent
 
 POWER_ADJUST=5      # Adjustment size in watts
 
 # Difference in actual temperature allowed before action:  Works only if current is BELOW target temp
 
 ALLOWED_TEMP_DIFF=3
 
 # Restore original power limit if fan speed is lower than this percentage
 
 RESTORE_POWER_LIMIT=90
 
 # lowest fan speed that will be used
-MINIMAL_FAN_SPEED=60
+
 MINIMAL_FAN_SPEED=70
 
 ########################################################################################
 #GLOBAL_WORKERNAME implementation
 IPW=$(ifconfig | sed -En 's/127.0.0.1//;s/.*inet (addr:)?(([0-9]*\.){3}[0-9]*).*/\2/p')
 IP_AS_WORKER=$(echo -n $IPW | tail -c -3 | sed 'y/./0/')
 MAC=$(ifconfig -a | grep -Po 'HWaddr \K.*$')
 MAC_AS_WORKER=$(echo -n $MAC | sed 'y/:/_/')
 if [ $GLOBAL_WORKERNAME == "YES" ]
 then
 if [ $AUTO_WORKERNAME == "HOST" ]
 then
 WORKERNAME=nv$IP_AS_WORKER
 fi
 if [ $AUTO_WORKERNAME == "MAC" ]
 then
 WORKERNAME=$MAC_AS_WORKER
 fi
 if [ $AUTO_WORKERNAME == "CUSTOM" ]
 then
 WORKERNAME=$CUSTOM_WORKERNAME
 fi
 fi
 ########################################################################################
 
 # set YOUR ADDRESSES, WORKERS, POOL and PORT:
 
 ZEC_WORKER="$WORKERNAME/papampi@gmail.com"
 ZEC_ADDRESS="t1JP85rFPJ3qnpJQTe6AjPqkuLS9yQy3H7y"
 ZEC_POOL="zec-eu1.nanopool.org"
 ZEC_PORT="6666"
 EWBF_VERSION="3_4"  # choose 3_3  or  3_4
 
 # change EWBF_PERCENT to alter donation percent for EWBF Miner
 EWBF_PERCENT=0
 
 ZCL_WORKER="$WORKERNAME"
 ZCL_ADDRESS="papampi"
 ZCL_POOL="zcl.suprnova.cc"
 ZCL_PORT="4042"
 
 ZEN_WORKER="$WORKERNAME"
 ZEN_ADDRESS="papampi"
 ZEN_POOL="zen.suprnova.cc"
 ZEN_PORT="3618"
 
 HUSH_WORKER="$WORKERNAME"
 HUSH_ADDRESS="papampi"
 HUSH_POOL="zdash.suprnova.cc"
 HUSH_PORT="4048"
 
 KMD_WORKER="$WORKERNAME"
 KMD_ADDRESS="papampi"
 KMD_POOL="kmd.suprnova.cc"
 KMD_PORT="6250"
 
 MPH_WORKER="$WORKERNAME"
 MPH_ADDRESS="papampi"
 MPH_EQUIHASH_POOL="us-east.equihash-hub.miningpoolhub.com"
 MPH_EQUIHASH_PORT="17023"
 
 MPH_WORKER="$WORKERNAME"
 MPH_ADDRESS="papampi"
 MPH_ETHASH_POOL="us-east.ethash-hub.miningpoolhub.com:17020"
 
 ZCOIN_WORKER="$WORKERNAME"
 ZCOIN_ADDRESS="papampi"
 ZCOIN_POOL="stratum+tcp://xzc.suprnova.cc:1569"
 
 SIGT_WORKER="$WORKERNAME"
 SIGT_ADDRESS="papampi"
 SIGT_POOL="stratum+tcp://sigt.suprnova.cc:7106"
 SIGT_INTENSITY=25
 
 UBQ_WORKER="$WORKERNAME"
 UBQ_ADDRESS="0xfdf3f92948d68a7d2854559497fe398b6cc709d4"
 UBQ_POOL="stratum+tcp://eu.ubiqpool.io:8008"
 UBQ_EXTENSION_ARGUMENTS=""
 
 # ZPOOL uses your BTC_ADDRESS
 ZPOOL_LYRA2V2_POOL="stratum+tcp://lyra2v2.mine.zpool.ca:4533"
 
 # ZPOOL uses your BTC_ADDRESS
 ZPOOL_BLAKE2S_POOL="stratum+tcp://blake2s.mine.zpool.ca:5766"
 
 # ZPOOL uses your BTC_ADDRESS
 ZPOOL_LBC_POOL="stratum+tcp://lbc.mine.zpool.ca:3334"
 
 # ZPOOL uses your BTC_ADDRESS
 ZPOOL_EQUIHASH_POOL="equihash.mine.zpool.ca"
 ZPOOL_EQUIHASH_PORT="2142"
 
 # ZPOOL uses your BTC_ADDRESS
 ZPOOL_NEOSCRYPT_POOL="stratum+tcp://neoscrypt.mine.zpool.ca:4233"
 
 DMD_WORKER="$WORKERNAME"
 DMD_ADDRESS="papampi"
 DMD_POOL="stratum+tcp://us.miningfield.com:3377"
 
 GRS_WORKER="$WORKERNAME"
 GRS_ADDRESS="xxxxxxxxxxxxxxxxxxxxxx"
 GRS_POOL="stratum+tcp://erebor.dwarfpool.com:3345"
 
 MONA_WORKER="$WORKERNAME"
 MONA_ADDRESS="papampi"
 MONA_POOL="stratum+tcp://mona.suprnova.cc:2995"
 
 # if YES ensure you update BTC_ADDRESS
 VTC_AUTOCONVERT_TO_BTC="YES"        #YES  NO
 VTC_WORKER="$WORKERNAME"
 VTC_ADDRESS="xxxxxxxxxxxxxxxxxxxxxxxxxxxxx"
 VTC_POOL="stratum+tcp://lyra2v2.mine.zpool.ca:4533"
 
 # if YES ensure you update BTC_ADDRESS
 # ZPOOL_SKUNK HERE
 SKUNK_AUTOCONVERT_TO_BTC="YES"        #YES  NO
 SKUNK_WORKER="$WORKERNAME"
 SKUNK_ADDRESS="VsvtYL2mz3YFM3fpt5pb28zHodTbnJodRc"
 SKUNK_POOL="stratum+tcp://skunk.mine.zpool.ca:8433"
 
 
 BTC_ADDRESS="1Hh8HeXgezTGAqusSHT1APPN3NaDSPnVDg"
 
 
 # NICE_ETHASH autoconverts to BTC: ensure you update BTC_ADDRESS if you use NICE_ETHASH
 NICE_ETHASH_WORKER="$WORKERNAME"
 NICE_ETHASH_POOL="stratum+tcp://daggerhashimoto.usa.nicehash.com:3353"
 GENOIL_NICE_ETHASH_POOL="daggerhashimoto.usa.nicehash.com:3353"
 NICE_ETHASH_EXTENSION_ARGUMENTS=""   # add any additional claymore arguments desired here
 
 # if YES ensure you update BTC_ADDRESS
 DGB_AUTOCONVERT_TO_BTC="YES"        #YES  NO
 DGB_INTENSITY=26
 DGB_ADDRESS="DKhCswL8Ff5UyZWdVEbyUVvDhLYMmfVLP7"
 DGB_POOL="stratum+tcp://skein.mine.zpool.ca:4933"
 
 LBC_WORKER="$WORKERNAME"
 LBC_ADDRESS="papampi"
 LBC_POOL="stratum+tcp://lbry.suprnova.cc:6256"
 
 FTC_WORKER="$WORKERNAME"
 FTC_ADDRESS="papampi"
 FTC_POOL="stratum+tcp://coinotron.com:3337"
 
 ONION_ADDRESS="DijjrA5hMtFxuqt2U3BiF5gZ1sejxVQBFi"
 ONION_POOL="stratum+tcp://kawaiipool.party:3633"
 
 
 USE_ENVIRONMENTAL_VARIBLES="NO"   #YES  NO
 
 DOT_POOL_FORMAT_or_FORWARD_SLASH_POOL_FORMAT="DOT"    # DOT  or  SLASH         # formerly ETHERMINEdotORG
 
 CLAYMORE_VERSION="9_8"    # choose 9_8  or  9_7  or  9_5  or  9_4  or  8_0
 
 ETHMINER_or_GENOIL_or_CLAYMORE="ETHMINER"  # choose  ETHMINER  or  GENOIL  or  CLAYMORE
 
 
 ETH_WORKER="$WORKERNAME/papampi@gmail.com"
 ETH_ADDRESS="0xCd5A01dF2AEb625672940850F5d08c49CdCE2E93"
 ETH_POOL="eth-us-east1.nanopool.org:9999"
 ETH_EXTENSION_ARGUMENTS=""    # add any additional claymore arguments desired here
 
 ETC_WORKER="$WORKERNAME/papampi@gmail.com"
 ETC_ADDRESS="0xa9aec2e736feefab291ce0aa796b1959a5b1d137"
 ETC_POOL="etc-us-east1.nanopool.org:19999"
 ETC_EXTENSION_ARGUMENTS=""    # add any additional claymore arguments desired here
 
 EXP_WORKER="$WORKERNAME"
 EXP_ADDRESS="0xa7108c64e6fec3193091f2cae2a5c62a36d4396a"
 EXP_POOL="exp-us.dwarfpool.com:8018"
 EXP_EXTENSION_ARGUMENTS=""    # add any additional claymore arguments desired here
 
 MUSIC_WORKER="$WORKERNAME"
 MUSIC_ADDRESS="0x48919b296f648bd2edfeb6f336d2b3f66a741ea5"
 MUSIC_POOL="stratum+tcp://213.154.202.174:3334"
 MUSIC_EXTENSION_ARGUMENTS=""    # add any additional claymore arguments desired here
 
 SC_WORKER="$WORKERNAME"
 SC_ADDRESS="1569a3353bb3353aedc6e0b79e796787ffcbe45d6caaa28f678ba74a5c50fdb02e735244e706"
 SC_POOL="sia-us-east1.nanopool.org:7777"
 SC_GW_POOL="sia-us-east1.nanopool.org:9980"
 
 DCR_WORKER="$WORKERNAME"
 DCR_ADDRESS="papampi"
 DCR_POOL="stratum+tcp://dcr.suprnova.cc:3252"
 
 PASC_WORKER="$WORKERNAME"
 PASC_ADDRESS="86646-64.b12a9833f216b5a8"
 PASC_POOL="pasc-us-east1.nanopool.org:15555"
 
 # if plusCPU is "YES" replace with your XMR info
 XMR_WORKER="$WORKERNAME"
 XMR_ADDRESS="47sghzufGhJJDQEbScMCwVBimTuq6L5JiRixD8VeGbpjCTA12noXmi4ZyBZLc99e66NtnKff34fHsGRoyZk3ES1s1V4QVcB.23d5f83d0021a50d8f809f4727c8622d3ea25798942bcb1ba0eee40cc157f65c"
 XMR_POOL="xmr-us-east1.nanopool.org:14444"
 
 ######################################################################################
 
 # SALFTER_NICEHASH_PROFIT_SWITCHING & SALFTER_MPH_PROFIT_SWITCHING Settings
 
 CURRENCY=USD
 
 POWER_COST=0.10
 
 MINIMUM_PROFIT=0.0
 
 MPH_USERNAME=papampi
 
 # this is salfters BTC address:  1TipsGocnz2N5qgAm9f7JLrsMqkb3oXe2
 
 PAYMENT_ADDRESS=1Hh8HeXgezTGAqusSHT1APPN3NaDSPnVDg
 
 WORKER_NAME=$WORKERNAME
 
 PROFIT_CHECK_TIMEOUT=900
 
 # ENSURE YOU USE Maxximus007_AUTO_TEMPERATURE_CONTROL for fanspeed
-daggerhashimoto_POWERLIMIT_WATTS=140
+
-__daggerhashimoto_CORE_OVERCLOCK=150
+
-daggerhashimoto_MEMORY_OVERCLOCK=800
+daggerhashimoto_POWERLIMIT_WATTS=125
 __daggerhashimoto_CORE_OVERCLOCK=100
-equihash_POWERLIMIT_WATTS=140
+daggerhashimoto_MEMORY_OVERCLOCK=100
-__equihash_CORE_OVERCLOCK=150
+
-equihash_MEMORY_OVERCLOCK=800
+equihash_POWERLIMIT_WATTS=125
 __equihash_CORE_OVERCLOCK=100
-neoscrypt_POWERLIMIT_WATTS=140
+equihash_MEMORY_OVERCLOCK=100
-__neoscrypt_CORE_OVERCLOCK=150
+
-neoscrypt_MEMORY_OVERCLOCK=800
+neoscrypt_POWERLIMIT_WATTS=125
 __neoscrypt_CORE_OVERCLOCK=100
-lyra2rev2_POWERLIMIT_WATTS=140
+neoscrypt_MEMORY_OVERCLOCK=100
-__lyra2rev2_CORE_OVERCLOCK=150
+
-lyra2rev2_MEMORY_OVERCLOCK=800
+lyra2rev2_POWERLIMIT_WATTS=125
 __lyra2rev2_CORE_OVERCLOCK=100
-lbry_POWERLIMIT_WATTS=140
+lyra2rev2_MEMORY_OVERCLOCK=100
-__lbry_CORE_OVERCLOCK=150
+
-lbry_MEMORY_OVERCLOCK=800
+lbry_POWERLIMIT_WATTS=125
 __lbry_CORE_OVERCLOCK=100
-Blake_Vanilla_POWERLIMIT_WATTS=140
+lbry_MEMORY_OVERCLOCK=100
-__Blake_Vanilla_CORE_OVERCLOCK=150
+
-Blake_Vanilla_MEMORY_OVERCLOCK=800
+Blake_Vanilla_POWERLIMIT_WATTS=125
 __Blake_Vanilla_CORE_OVERCLOCK=100
-Cryptonight_POWERLIMIT_WATTS=140
+Blake_Vanilla_MEMORY_OVERCLOCK=100
-__Cryptonight_CORE_OVERCLOCK=150
+
-Cryptonight_MEMORY_OVERCLOCK=800
+Cryptonight_POWERLIMIT_WATTS=125
 __Cryptonight_CORE_OVERCLOCK=100
-Groestl_POWERLIMIT_WATTS=140
+Cryptonight_MEMORY_OVERCLOCK=100
-__Groestl_CORE_OVERCLOCK=150
+
-Groestl_MEMORY_OVERCLOCK==800
+Groestl_POWERLIMIT_WATTS=125
 __Groestl_CORE_OVERCLOCK=100
-Keccak_POWERLIMIT_WATTS=140
+Groestl_MEMORY_OVERCLOCK=100
-__Keccak_CORE_OVERCLOCK=150
+
-Keccak_MEMORY_OVERCLOCK=800
+Keccak_POWERLIMIT_WATTS=125
 __Keccak_CORE_OVERCLOCK=100
-Myriad_Groestl_POWERLIMIT_WATTS=140
+Keccak_MEMORY_OVERCLOCK=100
-__Myriad_Groestl_CORE_OVERCLOCK=150
+
-Myriad_Groestl_MEMORY_OVERCLOCK=800
+Myriad_Groestl_POWERLIMIT_WATTS=125
 __Myriad_Groestl_CORE_OVERCLOCK=100
-Qubit_POWERLIMIT_WATTS=140
+Myriad_Groestl_MEMORY_OVERCLOCK=100
-__Qubit_CORE_OVERCLOCK=150
+
-Qubit_MEMORY_OVERCLOCK=800
+Qubit_POWERLIMIT_WATTS=125
 __Qubit_CORE_OVERCLOCK=100
-Scrypt_POWERLIMIT_WATTS=140
+Qubit_MEMORY_OVERCLOCK=100
-__Scrypt_CORE_OVERCLOCK=150
+
-Scrypt_MEMORY_OVERCLOCK=800
+Scrypt_POWERLIMIT_WATTS=125
 __Scrypt_CORE_OVERCLOCK=100
-Sia_POWERLIMIT_WATTS=140
+Scrypt_MEMORY_OVERCLOCK=100
-__Sia_CORE_OVERCLOCK=150
+
-Sia_MEMORY_OVERCLOCK=800
+Sia_POWERLIMIT_WATTS=125
 __Sia_CORE_OVERCLOCK=100
-Skein_POWERLIMIT_WATTS=140
+Sia_MEMORY_OVERCLOCK=100
-__Skein_CORE_OVERCLOCK=150
+
-Skein_MEMORY_OVERCLOCK=800
+Skein_POWERLIMIT_WATTS=125
 __Skein_CORE_OVERCLOCK=100
-X11_POWERLIMIT_WATTS=140
+Skein_MEMORY_OVERCLOCK=100
-__X11_CORE_OVERCLOCK=150
+
-X11_MEMORY_OVERCLOCK=800
+X11_POWERLIMIT_WATTS=125
 __X11_CORE_OVERCLOCK=100
 X11_MEMORY_OVERCLOCK=100
 
 
 # settings below are for rigs using individual powerlimit / target temps / clocks only
 
 ###########################################################################
 ###########################################################################
 ###########################################################################
 ###########################################################################
 ###########################################################################
 ###########################################################################
 ###########################################################################
 ###########################################################################
 
 INDIVIDUAL_POWERLIMIT="NO"   	# YES NO
 
 # Set individual powerlimits here if INDIVIDUAL_POWERLIMIT="YES"
 INDIVIDUAL_POWERLIMIT_0=53
 INDIVIDUAL_POWERLIMIT_1=53
 INDIVIDUAL_POWERLIMIT_2=53
 INDIVIDUAL_POWERLIMIT_3=53
 INDIVIDUAL_POWERLIMIT_4=53
 INDIVIDUAL_POWERLIMIT_5=53
 INDIVIDUAL_POWERLIMIT_6=53
 INDIVIDUAL_POWERLIMIT_7=53
 INDIVIDUAL_POWERLIMIT_8=53
 INDIVIDUAL_POWERLIMIT_9=53
 INDIVIDUAL_POWERLIMIT_10=53
 INDIVIDUAL_POWERLIMIT_11=53
 INDIVIDUAL_POWERLIMIT_12=53
 INDIVIDUAL_POWERLIMIT_13=53
 
 
-TARGET_TEMP_0=70
+
 
 # Set individual target temps here if INDIVIDUAL_TARGET_TEMPS="YES"
 TARGET_TEMP_0=75
 TARGET_TEMP_1=70
 TARGET_TEMP_2=70
 TARGET_TEMP_3=70
 TARGET_TEMP_4=70
 TARGET_TEMP_5=70
 TARGET_TEMP_6=70
 TARGET_TEMP_7=70
 TARGET_TEMP_8=70
 TARGET_TEMP_9=70
 TARGET_TEMP_10=70
 TARGET_TEMP_11=70
 TARGET_TEMP_12=70
 TARGET_TEMP_13=70
 
 
 INDIVIDUAL_CLOCKS="NO"      	# YES NO
 
 # Set individual clocks here if INDIVIDUAL_CLOCKS="YES"
 __CORE_OVERCLOCK_0=100
 MEMORY_OVERCLOCK_0=100
 
 __CORE_OVERCLOCK_1=100
 MEMORY_OVERCLOCK_1=100
 
 __CORE_OVERCLOCK_2=100
 MEMORY_OVERCLOCK_2=100
 
 __CORE_OVERCLOCK_3=100
 MEMORY_OVERCLOCK_3=100
 
 __CORE_OVERCLOCK_4=100
 MEMORY_OVERCLOCK_4=100
 
 __CORE_OVERCLOCK_5=100
 MEMORY_OVERCLOCK_5=100
 
 __CORE_OVERCLOCK_6=100
 MEMORY_OVERCLOCK_6=100
 
 __CORE_OVERCLOCK_7=100
 MEMORY_OVERCLOCK_7=100
 
 __CORE_OVERCLOCK_8=100
 MEMORY_OVERCLOCK_8=100
 
 __CORE_OVERCLOCK_9=100
 MEMORY_OVERCLOCK_9=100
 
 __CORE_OVERCLOCK_10=100
 MEMORY_OVERCLOCK_10=100
 
 __CORE_OVERCLOCK_11=100
 MEMORY_OVERCLOCK_11=100
 
 __CORE_OVERCLOCK_12=100
 MEMORY_OVERCLOCK_12=100
 
 __CORE_OVERCLOCK_13=100
 MEMORY_OVERCLOCK_13=100