View difference between Paste ID: 86Y8HnBp and e0KRbgSM

 /*
   Blink
  Turns on an LED on for one second, then off for one second, repeatedly.
 
  This example code is in the public domain.
  */
 int d3 = 3; //DIGITAL
 int d5 = 5;
 int d6 = 6;
 int c4 = 10;
 int c9 = 11;
 int c8 = 13;
 int c3 = 2;
 // int d3 = 3;
 //int d5 = 5;
 void setup() {
   // initialize the digital pin as an output.
   // Pin 13 has an LED connected on most Arduino boards:
   pinMode(d3, OUTPUT);
   pinMode(d5, OUTPUT);
   pinMode(d6, OUTPUT);
   pinMode(c4, OUTPUT);
   pinMode(c9, OUTPUT);
   pinMode(c8, OUTPUT);
   pinMode(c3, OUTPUT);
   Serial.begin(9600);
 
 }
 
 void loop() {
   //B
   digitalWrite(d3, HIGH);
   digitalWrite(c9, HIGH);
   digitalWrite(d5, HIGH);
   digitalWrite(d6, HIGH);
   digitalWrite(c4, HIGH);
   digitalWrite(c8, HIGH);
   digitalWrite(c3, HIGH);
   delay(1500);
 
   //TURN DISPLAY OFF
   digitalWrite(d3, LOW);
   digitalWrite(c9, LOW);
   digitalWrite(d5, LOW);
   digitalWrite(d6, LOW);
   digitalWrite(c4, LOW);
   digitalWrite(c8, LOW);
-  digitalWrite(c3, LOW);
+  digitalWrite(c3, LOW);
   delay(1500);
 }