pasf

/*
  Blink
 Turns on an LED on for one second, then off for one second, repeatedly.

 This example code is in the public domain.
 */
int d3 = 3; //DIGITAL
int d5 = 5;
int d6 = 6;
int c4 = 10;
int c9 = 11;
int c8 = 13;
int c3 = 2;
// int d3 = 3;
//int d5 = 5;
void setup() {
  // initialize the digital pin as an output.
  // Pin 13 has an LED connected on most Arduino boards:
  pinMode(d3, OUTPUT);
  pinMode(d5, OUTPUT);
  pinMode(d6, OUTPUT);
  pinMode(c4, OUTPUT);
  pinMode(c9, OUTPUT);
  pinMode(c8, OUTPUT);
  pinMode(c3, OUTPUT);
  Serial.begin(9600);

}

void loop() {
  //B
  digitalWrite(d3, HIGH);
  digitalWrite(c9, HIGH);
  digitalWrite(d5, HIGH);
  digitalWrite(d6, HIGH);
  digitalWrite(c4, HIGH);
  digitalWrite(c8, HIGH);
  digitalWrite(c3, HIGH);

  delay(1500);
  //TURN DISPLAY OFF
  digitalWrite(d3, LOW);
  digitalWrite(c9, LOW);
  digitalWrite(d5, LOW);
  digitalWrite(d6, LOW);
  digitalWrite(c4, LOW);
  digitalWrite(c8, LOW);
  digitalWrite(c3, LOW);

  delay(1500);

  //I
  digitalWrite(d3, HIGH);
  digitalWrite(c9, HIGH);
  digitalWrite(d5, HIGH);

  digitalWrite(c4, HIGH);
  digitalWrite(c8, HIGH);
  digitalWrite(c3, HIGH);

}

void boobies(){
  //B
  digitalWrite(d3, HIGH);
  digitalWrite(c9, HIGH);
  digitalWrite(d5, HIGH);
  digitalWrite(d6, HIGH);
  digitalWrite(c4, HIGH);
  digitalWrite(c8, HIGH);
  digitalWrite(c3, HIGH);
  delay(1500);
  digitalWrite(d3, LOW);
  digitalWrite(c9, LOW);


  digitalWrite(d5, LOW);
  digitalWrite(d6, LOW);
  digitalWrite(c4, LOW);
  digitalWrite(c8, LOW);
  digitalWrite(c3, LOW);
  //O
  /*digitalWrite(d3, HIGH);
   digitalWrite(c9, HIGH);
   digitalWrite(d5, HIGH);

   digitalWrite(c4, HIGH);
   digitalWrite(c8, HIGH);
   digitalWrite(c3, HIGH);
   delay(1500);
   blank();
   //O
   digitalWrite(d3, HIGH);
   digitalWrite(c9, HIGH);
   digitalWrite(d5, HIGH);

   digitalWrite(c4, HIGH);
   digitalWrite(c8, HIGH);
   digitalWrite(c3, HIGH);
   delay(1500);
   blank();
   //B
   digitalWrite(d3, HIGH);
   digitalWrite(c9, HIGH);
   digitalWrite(d5, HIGH);
   digitalWrite(d6, HIGH);
   digitalWrite(c4, HIGH);
   digitalWrite(c8, HIGH);
   digitalWrite(c3, HIGH);
   //I
   delay(1500);
   blank();
   digitalWrite(d3, HIGH);
   digitalWrite(d5, HIGH);
   delay(1500);
   blank();
   digitalWrite(c4, HIGH);
   digitalWrite(c3, HIGH);
   digitalWrite(d6, HIGH);
   digitalWrite(d5, HIGH);
   digitalWrite(c9, HIGH);
}