API tools faq
paste
Advertisement
naummo

HiKey 960 kernel messages before shut down #2

naummo
Jun 13th, 2018
601
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
C 65.75 KB | None | 0 0
raw download clone embed print report
  1. > adb shell dmesg
  2. [    0.000000] Booting Linux on physical CPU 0x0
  3. [    0.000000] Linux version 4.9.77-geae6367a9237 (android-build@wpiy7.hot.corp.google.com) (gcc version 4.9.x 20150123 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Jan 19 21:54:03 UTC 2018
  4. [    0.000000] Boot CPU: AArch64 Processor [410fd034]
  5. [    0.000000] efi: Getting EFI parameters from FDT:
  6. [    0.000000] efi: UEFI not found.
  7. [    0.000000] Ion: base 0xbe200000, size is 0x1e00000, node name graphic, heap-name carveout_gralloc namesize 17,[99][97][114][118]
  8. [    0.000000] Ion: insert heap-name carveout_gralloc
  9. [    0.000000] OF: reserved mem: initialized node graphic, compatible id hisi_ion
  10. [    0.000000] Reserved memory: created CMA memory pool at 0x0000000016c00000, size 64 MiB
  11. [    0.000000] OF: reserved mem: initialized node fastboot-cma-mem, compatible id shared-dma-pool
  12. [    0.000000] cma: Reserved 64 MiB at 0x00000000ba000000
  13. [    0.000000] On node 0 totalpages: 782271
  14. [    0.000000] DMA zone: 12288 pages used for memmap
  15. [    0.000000] DMA zone: 0 pages reserved
  16. [    0.000000] DMA zone: 782271 pages, LIFO batch:31
  17. [    0.000000] psci: probing for conduit method from DT.
  18. [    0.000000] psci: PSCIv1.0 detected in firmware.
  19. [    0.000000] psci: Using standard PSCI v0.2 function IDs
  20. [    0.000000] psci: MIGRATE_INFO_TYPE not supported.
  21. [    0.000000] percpu: Embedded 21 pages/cpu @ffffffc0be0fd000 s53272 r0 d32744 u86016
  22. [    0.000000] pcpu-alloc: s53272 r0 d32744 u86016 alloc=21*4096
  23. [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
  24. [    0.000000] Detected VIPT I-cache on CPU0
  25. [    0.000000] CPU features: enabling workaround for ARM erratum 845719
  26. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 769983
  27. [    0.000000] Kernel command line: androidboot.hardware=hikey960 console=ttyFIQ0 androidboot.console=ttyFIQ0 firmware_class.path=/system/etc/firmware loglevel=15 buildvariant=userdebug video=HDMI-A-1:1920x1080@60 androidboot.selinux=permissive androidboot.swtype=normal fastboot_version=DailyBuild_201706021648_FASTBOOT setup_logctl=1 fastbootdmd=0 enter_recovery=0 androidboot.mode=normal low_volt_flag=1 boardid=0x000014b5 normal_reset_type=coldboot ddr_die=3072M@0M  efuse_status=2 androidboot.serialno=0123456789ABCDEF himntn=111111111111111010111111101001100010001 boot_slice=0x0001af6b reboot_reason=AP_S_COLDBOOT recovery_update=0 userlock=locked bootlock=unlocked hw_bfm_enable=0 ddr_density=3 swiotlb=2 mdmreglogbase=0x00000000 mdmreglogsize=0x00000000 modem_socp_enable=0 androidboot.hardware=HiKey960 androidboot.veritymode=enforcing androidboot.verifiedbootstate=ORANGE ufs_product_name=KLUBG4G1CE-B0B1 format_data=1 cpu_buck_reg=0x;; androidboot.ddrsize=3 kce_status=1  console=ttyAMA6,1152
  28. [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  29. [    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
  30. [    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
  31. [    0.000000] Memory: 2888100K/3129084K available (12988K kernel code, 1318K rwdata, 3848K rodata, 1152K init, 995K bss, 109912K reserved, 131072K cma-reserved)
  32. [    0.000000] Virtual kernel memory layout:
  33. [    0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
  34. [    0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000   (   250 GB)
  35. [    0.000000] .text : 0xffffff8008080000 - 0xffffff8008d30000   ( 12992 KB)
  36. [    0.000000] .rodata : 0xffffff8008d30000 - 0xffffff8009100000   (  3904 KB)
  37. [    0.000000] .init : 0xffffff8009100000 - 0xffffff8009220000   (  1152 KB)
  38. [    0.000000] .data : 0xffffff8009220000 - 0xffffff8009369a00   (  1319 KB)
  39. [    0.000000] .bss : 0xffffff8009369a00 - 0xffffff800946294c   (   996 KB)
  40. [    0.000000] fixed   : 0xffffffbefe7fb000 - 0xffffffbefec00000   (  4116 KB)
  41. [    0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000   (    16 MB)
  42. [    0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000   (     4 GB maximum)
  43. [    0.000000] 0xffffffbf00000000 - 0xffffffbf03000000   (    48 MB actual)
  44. [    0.000000] memory  : 0xffffffc000000000 - 0xffffffc0c0000000   (  3072 MB)
  45. [    0.000000] Preemptible hierarchical RCU implementation.
  46. [    0.000000] \x09Build-time adjustment of leaf fanout to 64.
  47. [    0.000000] \x09RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
  48. [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
  49. [    0.000000] NR_IRQS:64 nr_irqs:64 0
  50. [    0.000000] arm_arch_timer: Architected cp15 timer(s) running at 1.92MHz (virt).
  51. [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1c570327e, max_idle_ns: 1763180809505 ns
  52. [    0.000004] sched_clock: 56 bits at 1920kHz, resolution 520ns, wraps every 4398046510977ns
  53. [    0.000101] clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58334160866034 ns
  54. [    0.000758] Console: colour dummy device 80x25
  55. [    0.000793] Calibrating delay loop (skipped), value calculated using timer frequency.. 3.84 BogoMIPS (lpj=7680)
  56. [    0.000805] pid_max: default: 32768 minimum: 301
  57. [    0.000980] Security Framework initialized
  58. [    0.000992] SELinux:  Initializing.
  59. [    0.001056] SELinux:  Starting in permissive mode
  60. [    0.001115] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
  61. [    0.001123] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
  62. [    0.002061] ftrace: allocating 41273 entries in 162 pages
  63. [    0.070453] sched-energy: Sched-energy-costs installed from DT
  64. [    0.070484] CPU0: update cpu_capacity 462
  65. [    0.070504] ASID allocator initialised with 32768 entries
  66. [    0.102083] EFI services will not be available.
  67. [    0.150057] Detected VIPT I-cache on CPU1
  68. [    0.150146] CPU1: update cpu_capacity 462
  69. [    0.150149] CPU1: Booted secondary processor [410fd034]
  70. [    0.181953] Detected VIPT I-cache on CPU2
  71. [    0.181989] CPU2: update cpu_capacity 462
  72. [    0.181991] CPU2: Booted secondary processor [410fd034]
  73. [    0.213984] Detected VIPT I-cache on CPU3
  74. [    0.214014] CPU3: update cpu_capacity 462
  75. [    0.214016] CPU3: Booted secondary processor [410fd034]
  76. [    0.247613] Detected VIPT I-cache on CPU4
  77. [    0.247621] CPU features: SANITY CHECK: Unexpected variation in SYS_ID_AA64MMFR0_EL1. Boot CPU: 0x00000000001122, CPU4: 0x00000000101122
  78. [    0.247628] CPU features: Unsupported CPU feature variation detected.
  79. [    0.247648] CPU4: update cpu_capacity 1024
  80. [    0.247649] CPU4: Booted secondary processor [410fd091]
  81. [    0.278028] Detected VIPT I-cache on CPU5
  82. [    0.278033] CPU features: SANITY CHECK: Unexpected variation in SYS_ID_AA64MMFR0_EL1. Boot CPU: 0x00000000001122, CPU5: 0x00000000101122
  83. [    0.278048] CPU5: update cpu_capacity 1024
  84. [    0.278049] CPU5: Booted secondary processor [410fd091]
  85. [    0.310079] Detected VIPT I-cache on CPU6
  86. [    0.310084] CPU features: SANITY CHECK: Unexpected variation in SYS_ID_AA64MMFR0_EL1. Boot CPU: 0x00000000001122, CPU6: 0x00000000101122
  87. [    0.310099] CPU6: update cpu_capacity 1024
  88. [    0.310101] CPU6: Booted secondary processor [410fd091]
  89. [    0.342135] Detected VIPT I-cache on CPU7
  90. [    0.342141] CPU features: SANITY CHECK: Unexpected variation in SYS_ID_AA64MMFR0_EL1. Boot CPU: 0x00000000001122, CPU7: 0x00000000101122
  91. [    0.342156] CPU7: update cpu_capacity 1024
  92. [    0.342157] CPU7: Booted secondary processor [410fd091]
  93. [    0.342230] Brought up 8 CPUs
  94. [    0.342286] SMP: Total of 8 processors activated.
  95. [    0.342297] CPU features: detected feature: 32-bit EL0 Support
  96. [    0.342359] CPU: All CPU(s) started at EL1
  97. [    0.342404] alternatives: patching kernel code
  98. [    0.342554] CPU7: update max cpu_capacity 1024
  99. [    0.346075] CPU2: update max cpu_capacity 462
  100. [    0.346082] CPU5: update max cpu_capacity 1024
  101. [    0.358708] DMI not present or invalid.
  102. [    0.359007] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  103. [    0.359025] futex hash table entries: 2048 (order: 6, 262144 bytes)
  104. [    0.361954] xor: measuring software checksum speed
  105. [    0.401919] 8regs     :  3629.000 MB/sec
  106. [    0.441926] 8regs_prefetch:  3866.000 MB/sec
  107. [    0.481957] 32regs    :  4543.000 MB/sec
  108. [    0.521988] 32regs_prefetch:  3866.000 MB/sec
  109. [    0.521993] xor: using function: 32regs (4543.000 MB/sec)
  110. [    0.522006] pinctrl core: initialized pinctrl subsystem
  111. [    0.523088] NET: Registered protocol family 16
  112. [    0.523780] schedtune: init normalization constants...
  113. [    0.523791] schedtune: CLUSTER[0-3]      min_pwr:     0 max_pwr:   144
  114. [    0.523798] schedtune: CPU[0]            min_pwr:     0 max_pwr:   502
  115. [    0.523804] schedtune: CPU[1]            min_pwr:     0 max_pwr:   502
  116. [    0.523809] schedtune: CPU[2]            min_pwr:     0 max_pwr:   502
  117. [    0.523815] schedtune: CPU[3]            min_pwr:     0 max_pwr:   502
  118. [    0.523820] schedtune: CLUSTER[4-7]      min_pwr:     0 max_pwr:   433
  119. [    0.523826] schedtune: CPU[4]            min_pwr:     0 max_pwr:  2848
  120. [    0.523831] schedtune: CPU[5]            min_pwr:     0 max_pwr:  2848
  121. [    0.523836] schedtune: CPU[6]            min_pwr:     0 max_pwr:  2848
  122. [    0.523841] schedtune: CPU[7]            min_pwr:     0 max_pwr:  2848
  123. [    0.523846] schedtune: SYSTEM            min_pwr:     0 max_pwr: 13977
  124. [    0.523852] schedtune: using normalization constants mul: 739642719 sh1: 1 sh2: 13
  125. [    0.523856] schedtune: verify normalization constants...
  126. [    0.523861] schedtune: max_pwr/2^0: 13977 => norm_pwr:  1024
  127. [    0.523867] schedtune: max_pwr/2^1: 6988 => norm_pwr:   511
  128. [    0.523871] schedtune: max_pwr/2^2: 3494 => norm_pwr:   255
  129. [    0.523876] schedtune: max_pwr/2^3: 1747 => norm_pwr:   127
  130. [    0.523881] schedtune: max_pwr/2^4:  873 => norm_pwr:    63
  131. [    0.523886] schedtune: max_pwr/2^5:  436 => norm_pwr:    31
  132. [    0.523891] schedtune: configured to support 5 boost groups
  133. [    0.539782] cpuidle: using governor ladder
  134. [    0.551788] cpuidle: using governor menu
  135. [    0.551801] Registered FIQ tty driver
  136. [    0.551859] serial_debugger: uart overlay applied
  137. [    0.552373] vdso: 2 pages (1 code @ ffffff8008d37000, 1 data @ ffffff8009224000)
  138. [    0.552384] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  139. [    0.553313] DMA: preallocated 256 KiB pool for atomic allocations
  140. [    0.553384] Serial: AMBA PL011 UART driver
  141. [    0.553636] pstore: using zlib compression
  142. [    0.554102] console [pstore-1] enabled
  143. [    0.554124] pstore: Registered ramoops as persistent store backend
  144. [    0.554133] ramoops: attached 0x100000@0x20a00000, ecc: 0/0
  145. [    0.571432] hi3660-mbox e896b000.mailbox: Mailbox enabled
  146. [    0.572615] uart-pl011 ffd74000.serial: could not find pctldev for node /soc/pinmux@e896c000/uart3_pmx_func, deferring probe
  147. [    0.572834] uart-pl011 fdf01000.serial: could not find pctldev for node /soc/pinmux@e896c000/uart4_pmx_func, deferring probe
  148. [    0.608234] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  149. [    0.674244] raid6: int64x1  gen()  1378 MB/s
  150. [    0.742241] raid6: int64x1  xor()   743 MB/s
  151. [    0.810292] raid6: int64x2  gen()  1605 MB/s
  152. [    0.878357] raid6: int64x2  xor()   955 MB/s
  153. [    0.946428] raid6: int64x4  gen()  1852 MB/s
  154. [    1.014460] raid6: int64x4  xor()  1114 MB/s
  155. [    1.082529] raid6: int64x8  gen()  1646 MB/s
  156. [    1.150564] raid6: int64x8  xor()  1011 MB/s
  157. [    1.218630] raid6: neonx1   gen()  2022 MB/s
  158. [    1.286678] raid6: neonx1   xor()  1163 MB/s
  159. [    1.354742] raid6: neonx2   gen()  3051 MB/s
  160. [    1.422787] raid6: neonx2   xor()  1901 MB/s
  161. [    1.490843] raid6: neonx4   gen()  4496 MB/s
  162. [    1.558892] raid6: neonx4   xor()  2542 MB/s
  163. [    1.626951] raid6: neonx8   gen()  3177 MB/s
  164. [    1.695010] raid6: neonx8   xor()  2159 MB/s
  165. [    1.695018] raid6: using algorithm neonx4 gen() 4496 MB/s
  166. [    1.695026] raid6: .... xor() 2542 MB/s, rmw enabled
  167. [    1.695033] raid6: using intx1 recovery algorithm
  168. [    1.695303] ACPI: Interpreter disabled.
  169. [    1.695978] hisi_smmu_probe_lpae, smmu_phy_pgtable_addr is = b624f7a0
  170. [    1.696097] vgaarb: loaded
  171. [    1.696285] SCSI subsystem initialized
  172. [    1.696427] libata version 3.00 loaded.
  173. [    1.696513] ssp-pl022 ffd68000.spi: could not find pctldev for node /soc/pinmux@fff11000/spi2_pmx_func, deferring probe
  174. [    1.696544] ssp-pl022 ff3b3000.spi: could not find pctldev for node /soc/pinmux@ff3b6000/spi3_pmx_func, deferring probe
  175. [    1.696716] usbcore: registered new interface driver usbfs
  176. [    1.696750] usbcore: registered new interface driver hub
  177. [    1.696826] usbcore: registered new device driver usb
  178. [    1.696846] tcpc_class_init_1.1.1_G
  179. [    1.696865] TCPC class init OK
  180. [    1.696878] Init Richtek RegMap
  181. [    1.697001] i2c_designware ffd71000.i2c: could not find pctldev for node /soc/pinmux@fff11000/i2c0_pmx_func, deferring probe
  182. [    1.697028] i2c_designware ffd72000.i2c: could not find pctldev for node /soc/pinmux@fff11000/i2c1_pmx_func, deferring probe
  183. [    1.697057] i2c_designware fdf0b000.i2c: could not find pctldev for node /soc/pinmux@fff11000/i2c7_pmx_func, deferring probe
  184. [    1.697130] Linux video capture interface: v2.00
  185. [    1.697264] dmi: Firmware registration failed.
  186. [    1.697559] Ion: invalid heap-name in node iommu_info, please check the name
  187. [    1.697571] Ion: invalid heap-name in node linear, please check the name
  188. [    1.697623] Ion: node name [heap_sys_user], heap-name [sys_heap]
  189. [    1.697635] Ion: heap index 0 : name sys_heap base 0x0 size 0x0 id 0 type 0
  190. [    1.697644] Ion: heap sys_heap base =0, try to find dynamic area
  191. [    1.697651] Ion: name = sys_heap, table name carveout_gralloc
  192. [    1.697658] Ion: name = sys_heap, table name  
  193. [    1.697665] Ion: name = sys_heap, table name  
  194. [    1.697672] Ion: name = sys_heap, table name  
  195. [    1.697678] Ion: name = sys_heap, table name  
  196. [    1.697694] Ion: node name [heap_sys_contig], heap-name [sys_contig]
  197. [    1.697705] Ion: heap index 1 : name sys_contig base 0x0 size 0x0 id 1 type 1
  198. [    1.697712] Ion: heap sys_contig base =0, try to find dynamic area
  199. [    1.697719] Ion: name = sys_contig, table name carveout_gralloc
  200. [    1.697726] Ion: name = sys_contig, table name  
  201. [    1.697732] Ion: name = sys_contig, table name  
  202. [    1.697739] Ion: name = sys_contig, table name  
  203. [    1.697745] Ion: name = sys_contig, table name  
  204. [    1.697759] Ion: node name [heap_carveout_gralloc], heap-name [carveout_gralloc]
  205. [    1.697769] Ion: heap index 2 : name carveout_gralloc base 0x0 size 0x0 id 2 type 2
  206. [    1.697777] Ion: heap carveout_gralloc base =0, try to find dynamic area
  207. [    1.697784] Ion: name = carveout_gralloc, table name carveout_gralloc
  208. [    1.697792] Ion: have found heap name carveout_gralloc base = 0xbe200000, size 31457280
  209. [    1.697806] Ion: node name [heap_camera], heap-name [camera_heap]
  210. [    1.697815] Ion: type name error ion_dma_pool!
  211. [    1.697832] in hisi_ion_enable_iommu start
  212. [    1.697845] get_domain_data_lpae:start_addr 0x40000, size 0xbffc0000 align 0x8000
  213. [    1.697859] Ion: id 0  name sys_heap base 0 size 0
  214. [    1.697935] Ion: adding heap sys_heap of type 0 with 0@0
  215. [    1.697943] Ion: id 1  name sys_contig base 0 size 0
  216. [    1.697956] Ion: adding heap sys_contig of type 1 with 0@0
  217. [    1.697964] Ion: id 2  name carveout_gralloc base 3189768192 size 31457280
  218. [    1.702636] Ion: adding heap carveout_gralloc of type 2 with be200000@1e00000
  219. [    1.702906] Advanced Linux Sound Architecture Driver Initialized.
  220. [    1.703277] Bluetooth: Core ver 2.22
  221. [    1.703309] NET: Registered protocol family 31
  222. [    1.703317] Bluetooth: HCI device and connection manager initialized
  223. [    1.703331] Bluetooth: HCI socket layer initialized
  224. [    1.703343] Bluetooth: L2CAP socket layer initialized
  225. [    1.703372] Bluetooth: SCO socket layer initialized
  226. [    1.703674] NetLabel: Initializing
  227. [    1.703683] NetLabel:  domain hash size = 128
  228. [    1.703690] NetLabel:  protocols = UNLABELED CIPSOv4
  229. [    1.703730] NetLabel:  unlabeled traffic allowed by default
  230. [    1.704467] clocksource: Switched to clocksource arch_sys_counter
  231. [    1.768184] VFS: Disk quotas dquot_6.6.0
  232. [    1.768266] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  233. [    1.768641] pnp: PnP ACPI: disabled
  234. [    1.772388] NET: Registered protocol family 2
  235. [    1.772827] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
  236. [    1.772974] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
  237. [    1.773186] TCP: Hash tables configured (established 32768 bind 32768)
  238. [    1.773227] UDP hash table entries: 2048 (order: 4, 65536 bytes)
  239. [    1.773259] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
  240. [    1.773430] NET: Registered protocol family 1
  241. [    1.773458] PCI: CLS 0 bytes, default 128
  242. [    1.773644] Trying to unpack rootfs image as initramfs...
  243. [    1.809812] Freeing initrd memory: 1372K
  244. [    1.810739] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
  245. [    1.810957] kvm [1]: HYP mode not available
  246. [    1.813119] audit: initializing netlink subsys (disabled)
  247. [    1.813184] audit: type=2000 audit(1.759:1): initialized
  248. [    1.813714] workingset: timestamp_bits=46 max_order=20 bucket_order=0
  249. [    1.814409] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  250. [    1.814465] Registering sdcardfs 0.1
  251. [    1.814620] fuse init (API version 7.26)
  252. [    1.814780] 9p: Installing v9fs 9p2000 file system support
  253. [    1.814973] SELinux:  Registering netfilter hooks
  254. [    1.817390] io scheduler noop registered
  255. [    1.817415] io scheduler cfq registered (default)
  256. [    1.818141] pinctrl-single e896c000.pinmux: 124 pins at pa ffffff800959a000 size 496
  257. [    1.818249] pinctrl-single ff37e000.pinmux: 6 pins at pa ffffff800959c000 size 24
  258. [    1.818355] pinctrl-single ff3b6000.pinmux: 12 pins at pa ffffff800959e000 size 48
  259. [    1.818446] pinctrl-single ff3fd000.pinmux: 6 pins at pa ffffff80095a0000 size 24
  260. [    1.818576] pinctrl-single fff11000.pinmux: 42 pins at pa ffffff80095a2000 size 168
  261. [    1.818781] pinctrl-single e896c800.pinmux: 128 pins at pa ffffff80095a4800 size 512
  262. [    1.818882] pinctrl-single ff3b6800.pinmux: 6 pins at pa ffffff80095a6800 size 24
  263. [    1.818986] pinctrl-single ff3fd800.pinmux: 6 pins at pa ffffff80095a8800 size 24
  264. [    1.819085] pinctrl-single ff37e800.pinmux: 6 pins at pa ffffff80095aa800 size 24
  265. [    1.819223] pinctrl-single fff11800.pinmux: 47 pins at pa ffffff80095ac800 size 188
  266. [    1.819820] pl061_gpio e8a0b000.gpio: PL061 GPIO chip @0x00000000e8a0b000 registered
  267. [    1.820188] pl061_gpio e8a0c000.gpio: PL061 GPIO chip @0x00000000e8a0c000 registered
  268. [    1.820564] pl061_gpio e8a0d000.gpio: PL061 GPIO chip @0x00000000e8a0d000 registered
  269. [    1.820918] pl061_gpio e8a0e000.gpio: PL061 GPIO chip @0x00000000e8a0e000 registered
  270. [    1.821266] pl061_gpio e8a0f000.gpio: PL061 GPIO chip @0x00000000e8a0f000 registered
  271. [    1.821608] pl061_gpio e8a10000.gpio: PL061 GPIO chip @0x00000000e8a10000 registered
  272. [    1.821960] pl061_gpio e8a11000.gpio: PL061 GPIO chip @0x00000000e8a11000 registered
  273. [    1.822302] pl061_gpio e8a12000.gpio: PL061 GPIO chip @0x00000000e8a12000 registered
  274. [    1.822646] pl061_gpio e8a13000.gpio: PL061 GPIO chip @0x00000000e8a13000 registered
  275. [    1.822993] pl061_gpio e8a14000.gpio: PL061 GPIO chip @0x00000000e8a14000 registered
  276. [    1.823333] pl061_gpio e8a15000.gpio: PL061 GPIO chip @0x00000000e8a15000 registered
  277. [    1.823683] pl061_gpio e8a16000.gpio: PL061 GPIO chip @0x00000000e8a16000 registered
  278. [    1.824035] pl061_gpio e8a17000.gpio: PL061 GPIO chip @0x00000000e8a17000 registered
  279. [    1.824384] pl061_gpio e8a18000.gpio: PL061 GPIO chip @0x00000000e8a18000 registered
  280. [    1.824750] pl061_gpio e8a19000.gpio: PL061 GPIO chip @0x00000000e8a19000 registered
  281. [    1.825102] pl061_gpio e8a1a000.gpio: PL061 GPIO chip @0x00000000e8a1a000 registered
  282. [    1.825440] pl061_gpio e8a1b000.gpio: PL061 GPIO chip @0x00000000e8a1b000 registered
  283. [    1.825777] pl061_gpio e8a1c000.gpio: PL061 GPIO chip @0x00000000e8a1c000 registered
  284. [    1.826133] pl061_gpio ff3b4000.gpio: PL061 GPIO chip @0x00000000ff3b4000 registered
  285. [    1.826484] pl061_gpio ff3b5000.gpio: PL061 GPIO chip @0x00000000ff3b5000 registered
  286. [    1.826829] pl061_gpio e8a1f000.gpio: PL061 GPIO chip @0x00000000e8a1f000 registered
  287. [    1.827180] pl061_gpio e8a20000.gpio: PL061 GPIO chip @0x00000000e8a20000 registered
  288. [    1.827544] pl061_gpio fff0b000.gpio: PL061 GPIO chip @0x00000000fff0b000 registered
  289. [    1.827897] pl061_gpio fff0c000.gpio: PL061 GPIO chip @0x00000000fff0c000 registered
  290. [    1.828260] pl061_gpio fff0d000.gpio: PL061 GPIO chip @0x00000000fff0d000 registered
  291. [    1.828635] pl061_gpio fff0e000.gpio: PL061 GPIO chip @0x00000000fff0e000 registered
  292. [    1.828999] pl061_gpio fff0f000.gpio: PL061 GPIO chip @0x00000000fff0f000 registered
  293. [    1.829359] pl061_gpio fff10000.gpio: PL061 GPIO chip @0x00000000fff10000 registered
  294. [    1.829711] pl061_gpio fff1d000.gpio: PL061 GPIO chip @0x00000000fff1d000 registered
  295. [    1.860841] OF: PCI: host bridge /soc/pcie@f4000000 ranges:
  296. [    1.860861] OF: PCI:   MEM 0xf6000000..0xf7ffffff -> 0x00000000
  297. [    2.861582] Kirin-pcie f4000000.pcie: Link Fail
  298. [    2.861692] Kirin-pcie f4000000.pcie: PCI host bridge to bus 0000:00
  299. [    2.861705] pci_bus 0000:00: root bus resource [bus 00-01]
  300. [    2.861716] pci_bus 0000:00: root bus resource [mem 0xf6000000-0xf7ffffff] (bus address [0x00000000-0x01ffffff])
  301. [    2.861757] pci 0000:00:00.0: [19e5:3660] type 01 class 0x060400
  302. [    2.861795] pci 0000:00:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
  303. [    2.861933] pci 0000:00:00.0: supports D1 D2
  304. [    2.861942] pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot
  305. [    2.862260] pci 0000:00:00.0: BAR 0: assigned [mem 0xf6000000-0xf6ffffff]
  306. [    2.862275] pci 0000:00:00.0: PCI bridge to [bus 01]
  307. [    2.862557] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt
  308. [    2.862570] pcie_pme 0000:00:00.0:pcie001: service driver pcie_pme loaded
  309. [    2.862676] aer 0000:00:00.0:pcie002: service driver aer loaded
  310. [    2.865175] hisi-asp-dma e804b000.asp_dmac: initialized
  311. [    2.866895] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  312. [    2.868198] [drm] Initialized
  313. [    2.868537] [drm] wait for external HDMI bridge driver.
  314. [    2.868698] mali e82c0000.mali: Continuing without Mali regulator control
  315. [    2.869351] mali e82c0000.mali: GPU identified as 0x0 arch 6.0.10 r0p0 status 2
  316. [    2.869853] mali e82c0000.mali: Using configured power model mali-simple-power-model, and fallback mali-simple-power-model
  317. [    2.870250] mali e82c0000.mali: Probed as mali0
  318. [    2.877507] brd: module loaded
  319. [    2.880478] Error reading temperature for gpu thermal zone: -22
  320. [    2.881227] loop: module loaded
  321. [    2.881470] [I/GPIO_HUB] gpio_hub_probe: step in
  322. [    2.881656] [I/GPIO_HUB] gpio_hub_init:gpio hub init status:0
  323. [    2.883505] ufshcd-hi3660 ff3b0000.ufs: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled
  324. [    2.883517] ufshcd-hi3660 ff3b0000.ufs: ufshcd_populate_vreg: Unable to find vcc-supply regulator, assuming enabled
  325. [    2.883527] ufshcd-hi3660 ff3b0000.ufs: ufshcd_populate_vreg: Unable to find vccq-supply regulator, assuming enabled
  326. [    2.883535] ufshcd-hi3660 ff3b0000.ufs: ufshcd_populate_vreg: Unable to find vccq2-supply regulator, assuming enabled
  327. [    2.905104] scsi host0: ufshcd
  328. [    2.921370] libphy: Fixed MDIO Bus: probed
  329. [    2.921379] tun: Universal TUN/TAP device driver, 1.6
  330. [    2.921386] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  331. [    2.921786] PPP generic driver version 2.4.2
  332. [    2.921867] PPP BSD Compression module registered
  333. [    2.921876] PPP Deflate Compression module registered
  334. [    2.921902] PPP MPPE Compression module registered
  335. [    2.921989] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
  336. [    2.922029] usbcore: registered new interface driver pegasus
  337. [    2.922060] usbcore: registered new interface driver rtl8150
  338. [    2.922092] usbcore: registered new interface driver r8152
  339. [    2.922125] usbcore: registered new interface driver asix
  340. [    2.922157] usbcore: registered new interface driver ax88179_178a
  341. [    2.922189] usbcore: registered new interface driver cdc_ether
  342. [    2.922221] usbcore: registered new interface driver dm9601
  343. [    2.922251] usbcore: registered new interface driver CoreChips
  344. [    2.922282] usbcore: registered new interface driver smsc75xx
  345. [    2.922314] usbcore: registered new interface driver smsc95xx
  346. [    2.922345] usbcore: registered new interface driver net1080
  347. [    2.922376] usbcore: registered new interface driver plusb
  348. [    2.922406] usbcore: registered new interface driver cdc_subset
  349. [    2.922436] usbcore: registered new interface driver zaurus
  350. [    2.922469] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
  351. [    2.922505] usbcore: registered new interface driver cdc_ncm
  352. [    2.922828] [USB3][hisi_dwc3_probe]+
  353. [    2.922951] [USB3][get_phy_param]eye diagram param: 0x1c466e3
  354. [    2.922959] [USB3][get_phy_param]eye diagram host param: 0x1c466e3
  355. [    2.922969] [USB3][get_phy_param]usb3_phy_cr_param: 0xb80
  356. [    2.922976] [USB3][get_phy_param]usb3_phy_host_cr_param: 0x980
  357. [    2.922984] [USB3][get_phy_param]usb3_phy_tx_vboost_lvl: 5
  358. [    2.923010] [USB3][get_resource]this is asic platform (fpga flag 0)
  359. [    2.923017] [USB3][create_attr_file]+
  360. [    2.923087] [USB3][create_attr_file]-
  361. [    2.923097] [USB3][hi3660_usb3phy_init]+
  362. [    2.948620] [USB3][config_femtophy_param]set hs phy param 0x1c466e3 for device
  363. [    2.949238] [USB3][config_femtophy_param]set ss phy rx equalization 0xb80
  364. [    2.950250] [USB3][config_femtophy_param]set ss RX_SCOPE_VDCC 0x1
  365. [    2.950259] [USB3][config_femtophy_param]set ss phy tx vboost lvl 0x5
  366. [    2.950267] [USB3][set_hisi_dwc3_power_flag]set hisi_dwc3_power_flag 1
  367. [    2.950273] [USB3][hi3660_usb3phy_init]-
  368. [    2.950782] [dwc3_otg_init]+
  369. [    2.950793] DWC3_OCFG:\x090x0
  370. [    2.950801] DWC3_OCTL:\x090x40
  371. [    2.950807] DWC3_OEVT:\x090x80000000
  372. [    2.950814] DWC3_OEVTEN:\x090x0
  373. [    2.950821] DWC3_OSTS:\x090x19
  374. [    2.950828] DWC3_BCFG:\x090x0
  375. [    2.950835] DWC3_BCEVT:\x090x0
  376. [    2.950841] DWC3_BCEVTEN:\x090x0
  377. [    2.950847] [dwc3_otg_init]-
  378. [    2.950883] dwc3 ff100000.dwc3: dwc3_host_init if otg, otg will do device_add.
  379. [    2.953383] [USB3][hisi_dwc3_wake_lock]usb otg wake lock
  380. [    2.953395] [USB3][hisi_dwc3_probe]init state: OFF
  381. [    2.953403] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in:1
  382. [    2.953410] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in otg:1
  383. [    2.953418] [USB3][hisi_usb_otg_event]event: 1
  384. [    2.953437] [USB3][hisi_dwc3_probe]-
  385. [    2.953447] [USB3][event_work]+
  386. [    2.953462] [USB3][handle_event][handle_event] type: 1
  387. [    2.953473] [dwc3_otg_work]+\x0a evt = 4
  388. [    2.953483] [dwc3_otg_stop_peripheral]+
  389. [    2.953493] [dwc3_otg_stop_peripheral]-
  390. [    2.953501] [dwc3_suspend_device] +
  391. [    2.953576] [dwc3_suspend_device] -
  392. [    2.953585] [dwc3_otg_work]-
  393. [    2.953594] [USB3][hisi_dwc3_wake_unlock]usb otg wake unlock
  394. [    2.953607] [USB3][handle_event]hisi usb status: DEVICE -> OFF
  395. [    2.953616] [USB3][event_work]-
  396. [    2.953843] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  397. [    2.953852] ehci-pci: EHCI PCI platform driver
  398. [    2.953895] ehci-platform: EHCI generic platform driver
  399. [    2.954023] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  400. [    2.954040] ohci-pci: OHCI PCI platform driver
  401. [    2.954075] ohci-platform: OHCI generic platform driver
  402. [    2.954401] usbcore: registered new interface driver cdc_acm
  403. [    2.954408] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  404. [    2.954442] usbcore: registered new interface driver usb-storage
  405. [    2.954508] usbcore: registered new interface driver usbserial
  406. [    2.954535] usbcore: registered new interface driver usbserial_generic
  407. [    2.954562] usbserial: USB Serial support registered for generic
  408. [    2.954586] usbcore: registered new interface driver ftdi_sio
  409. [    2.954612] usbserial: USB Serial support registered for FTDI USB Serial Device
  410. [    2.954637] usbcore: registered new interface driver option
  411. [    2.954662] usbserial: USB Serial support registered for GSM modem (1-port)
  412. [    2.954688] usbcore: registered new interface driver pl2303
  413. [    2.954713] usbserial: USB Serial support registered for pl2303
  414. [    2.954739] usbcore: registered new interface driver qcserial
  415. [    2.954763] usbserial: USB Serial support registered for Qualcomm USB modem
  416. [    2.954789] usbcore: registered new interface driver usb_serial_simple
  417. [    2.954814] usbserial: USB Serial support registered for carelink
  418. [    2.954839] usbserial: USB Serial support registered for zio
  419. [    2.954863] usbserial: USB Serial support registered for funsoft
  420. [    2.954887] usbserial: USB Serial support registered for flashloader
  421. [    2.954914] usbserial: USB Serial support registered for google
  422. [    2.954938] usbserial: USB Serial support registered for vivopay
  423. [    2.954963] usbserial: USB Serial support registered for moto_modem
  424. [    2.954986] usbserial: USB Serial support registered for novatel_gps
  425. [    2.955010] usbserial: USB Serial support registered for hp4x
  426. [    2.955035] usbserial: USB Serial support registered for suunto
  427. [    2.955059] usbserial: USB Serial support registered for siemens_mpi
  428. [    2.955141] gadgetfs: USB Gadget filesystem, version 24 Aug 2004
  429. [    2.955148] [I/hisi_pd] pd_dpm_init
  430. [    2.955234] [I/hisi_pd] pd_dpm_probe : +++++++++
  431. [    2.955297] [I/hisi_pd] pd_dpm_probe ++++\x0d\x0a\x0d
  432. [    2.955559] rt1711h_init (1.1.8_G): initializing...
  433. [    2.955575] rt1711h node found...
  434. [    2.955865] mousedev: PS/2 mouse device common for all mice
  435. [    2.956357] rtc-pl031 fff04000.rtc: rtc core: registered pl031 as rtc0
  436. [    2.956564] i2c /dev entries driver
  437. [    2.957477] hi3660_thermal fff30000.tsensor: failed to register thermal sensor0: -19
  438. [    2.957494] hi3660_thermal fff30000.tsensor: failed to register thermal sensor1: -19
  439. [    2.957512] hi3660_thermal fff30000.tsensor: failed to register thermal sensor2: -19
  440. [    2.957527] hi3660_thermal fff30000.tsensor: failed to register thermal sensor3: -19
  441. [    2.957571] hi3660_thermal fff30000.tsensor: failed to register thermal sensor5: -19
  442. [    2.957579] hi3660_thermal fff30000.tsensor: Thermal Sensor Loaded
  443. [    2.957852] sp805-wdt e8a06000.watchdog: registration successful
  444. [    2.957967] sp805-wdt e8a07000.watchdog: registration successful
  445. [    2.958021] device-mapper: uevent: version 1.0.3
  446. [    2.958112] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
  447. [    2.958240] Bluetooth: HCI UART driver ver 2.3
  448. [    2.958251] Bluetooth: HCI UART protocol H4 registered
  449. [    2.958304] Bluetooth: HCI UART protocol LL registered
  450. [    2.958343] usbcore: registered new interface driver btusb
  451. [    2.960055] DT idle-states: /cpus/idle-states/cluster-sleep-0 idle state not valid, bailing out
  452. [    2.961307] sdhci: Secure Digital Host Controller Interface driver
  453. [    2.961315] sdhci: Copyright(c) Pierre Ossman
  454. [    2.961340] Synopsys Designware Multimedia Card Interface Driver
  455. [    2.961840] dwmmc_k3 ff37f000.dwmmc1: fifo-depth property not found, using value of FIFOTH register as default
  456. [    2.963979] dwmmc_k3 ff37f000.dwmmc1: IDMAC supports 64-bit address mode.
  457. [    2.964052] dwmmc_k3 ff37f000.dwmmc1: Using internal DMA controller.
  458. [    2.964060] dwmmc_k3 ff37f000.dwmmc1: Version ID is 270a
  459. [    2.964089] dwmmc_k3 ff37f000.dwmmc1: DW MMC controller at irq 55,32 bit host data width,256 deep fifo
  460. [    2.964252] dwmmc_k3 ff37f000.dwmmc1: Got CD GPIO
  461. [    2.987141] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  462. [    3.005942] dwmmc_k3 ff37f000.dwmmc1: 1 slots initialized
  463. [    3.006385] dwmmc_k3 ff3ff000.dwmmc2: fifo-depth property not found, using value of FIFOTH register as default
  464. [    3.009605] dwmmc_k3 ff3ff000.dwmmc2: IDMAC supports 64-bit address mode.
  465. [    3.011624] dwmmc_k3 ff3ff000.dwmmc2: Using internal DMA controller.
  466. [    3.011665] dwmmc_k3 ff3ff000.dwmmc2: Version ID is 270a
  467. [    3.011821] dwmmc_k3 ff3ff000.dwmmc2: DW MMC controller at irq 56,32 bit host data width,256 deep fifo
  468. [    3.012764] sdhci-pltfm: SDHCI platform and OF driver helper
  469. [    3.019127] ledtrig-cpu: registered to indicate activity on CPUs
  470. [    3.019394] hidraw: raw HID events driver (C) Jiri Kosina
  471. [    3.024396] usbcore: registered new interface driver usbhid
  472. [    3.024433] usbhid: USB HID core driver
  473. [    3.025067] ashmem: initialized
  474. [    3.025330] nanohub: loaded; ret=0
  475. [    3.026010] hi6220-serial-debug fff32000.fiq-debugger: No signal IRQ, error=-6
  476. [    3.026047] hi6220-serial-debug fff32000.fiq-debugger: No wakeup IRQ, error=-6
  477. [    3.267946] ufshcd-hi3660 ff3b0000.ufs: ufshcd_read_desc_param: Failed reading descriptor. desc_id 0 param_offset 0 buff_len 31 ret 0
  478. [    3.267960] ufshcd-hi3660 ff3b0000.ufs: ufs_get_device_info: Failed reading Device Desc. err = -22
  479. [    3.267972] ufshcd-hi3660 ff3b0000.ufs: ufs_advertise_fixup_device: Failed getting device info. err = -22
  480. [    3.270320] ufs final power mode: gear = 3, lane = 1, pwr = 1, rate = 2
  481. [    3.270333] ufshcd-hi3660 ff3b0000.ufs: set TX_EQUALIZER 3.5db
  482. [    3.272755] ufshcd-hi3660 ff3b0000.ufs: check TX_EQUALIZER DB value lane0 = 0x1
  483. [    3.272916] ufshcd-hi3660 ff3b0000.ufs: ufshcd_find_max_sup_active_icc_level: Regulator capability was not set, actvIccLevel=0
  484. [    3.278694] scsi 0:0:0:49488: scsi_add_lun: correcting incorrect peripheral device type 0x0 for W-LUN 0x            c150hN
  485. [    3.278710] scsi 0:0:0:49488: Well-known LUN    SAMSUNG  KLUBG4G1CE-B0B1  1000 PQ: 0 ANSI: 6
  486. [    3.325868] scsi 0:0:0:49456: scsi_add_lun: correcting incorrect peripheral device type 0x0 for W-LUN 0x            c130hN
  487. [    3.325873] scsi 0:0:0:49456: Well-known LUN    SAMSUNG  KLUBG4G1CE-B0B1  1000 PQ: 0 ANSI: 6
  488. [    3.385986] scsi 0:0:0:49476: scsi_add_lun: correcting incorrect peripheral device type 0x0 for W-LUN 0x            c144hN
  489. [    3.385992] scsi 0:0:0:49476: Well-known LUN    SAMSUNG  KLUBG4G1CE-B0B1  1000 PQ: 0 ANSI: 6
  490. [    3.437856] scsi 0:0:0:0: Direct-Access     SAMSUNG  KLUBG4G1CE-B0B1  1000 PQ: 0 ANSI: 6
  491. [    3.494016] sd 0:0:0:0: [sda] 1024 4096-byte logical blocks: (4.19 MB/4.00 MiB)
  492. [    3.494020] sd 0:0:0:0: [sda] 16384-byte physical blocks
  493. [    3.494527] scsi 0:0:0:1: Direct-Access     SAMSUNG  KLUBG4G1CE-B0B1  1000 PQ: 0 ANSI: 6
  494. [    3.495247] sd 0:0:0:0: [sda] Write Protect is off
  495. [    3.495252] sd 0:0:0:0: [sda] Mode Sense: 00 32 00 10
  496. [    3.495833] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
  497. [    3.499329] sd 0:0:0:0: [sda] Attached SCSI disk
  498. [    3.539145] sd 0:0:0:1: [sdb] 1024 4096-byte logical blocks: (4.19 MB/4.00 MiB)
  499. [    3.539156] sd 0:0:0:1: [sdb] 16384-byte physical blocks
  500. [    3.539689] scsi 0:0:0:2: Direct-Access     SAMSUNG  KLUBG4G1CE-B0B1  1000 PQ: 0 ANSI: 6
  501. [    3.541340] sd 0:0:0:1: [sdb] Write Protect is off
  502. [    3.541343] sd 0:0:0:1: [sdb] Mode Sense: 00 32 00 10
  503. [    3.541847] sd 0:0:0:1: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
  504. [    3.544598] sd 0:0:0:1: [sdb] Attached SCSI disk
  505. [    3.573692] sd 0:0:0:2: [sdc] 2048 4096-byte logical blocks: (8.39 MB/8.00 MiB)
  506. [    3.573694] sd 0:0:0:2: [sdc] 16384-byte physical blocks
  507. [    3.574186] sd 0:0:0:2: [sdc] Write Protect is off
  508. [    3.574188] sd 0:0:0:2: [sdc] Mode Sense: 00 32 00 10
  509. [    3.574210] scsi 0:0:0:3: Direct-Access     SAMSUNG  KLUBG4G1CE-B0B1  1000 PQ: 0 ANSI: 6
  510. [    3.574448] sd 0:0:0:2: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
  511. [    3.576282] Alternate GPT is invalid, using primary GPT.
  512. [    3.576289] sdc: sdc1
  513. [    3.577222] random: fast init done
  514. [    3.577369] sd 0:0:0:2: [sdc] Attached SCSI disk
  515. [    3.617970] sd 0:0:0:3: [sdd] 7805952 4096-byte logical blocks: (32.0 GB/29.8 GiB)
  516. [    3.617972] sd 0:0:0:3: [sdd] 16384-byte physical blocks
  517. [    3.619854] sd 0:0:0:3: [sdd] Write Protect is off
  518. [    3.619856] sd 0:0:0:3: [sdd] Mode Sense: 00 32 00 10
  519. [    3.620414] sd 0:0:0:3: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
  520. [    3.625761] Alternate GPT is invalid, using primary GPT.
  521. [    3.625773] sdd: sdd1 sdd2 sdd3 sdd4 sdd5 sdd6 sdd7 sdd8 sdd9 sdd10 sdd11 sdd12 sdd13
  522. [    3.627657] sd 0:0:0:3: [sdd] Attached SCSI disk
  523. [    6.267234] console [ttyFIQ0] enabled
  524. [    6.271065] Registered fiq debugger ttyFIQ0
  525. [    6.275703] hisi_ddr_devfreq ddr_devfreq: init success
  526. [    6.281171] optee: probing for conduit method from DT.
  527. [    6.286383] optee: api uid mismatch
  528. [    6.290042] hifi_misc [E][360073]:hifi_check_img_loaded:1472: hifi img is loaded fail: 0xffffffff.
  529. [    6.300661] hifi pdev name[hifidsp].
  530. [    6.304316] DRV_IPCIntInit begin.
  531. [    6.307675] DRV_IPCIntInit line = 220
  532. [    6.311383] BSP_DRV_IPCIntInit end.
  533. [    6.314914] func = mailbox_init, line = 695 baseaddr = 0x8b5f9800
  534. [    6.321089] mem_remap_type: phys_addr:0x8b5f9800 size:0x00010000 npages:17 vaddr:ffffff800b87b800 offset:0x00000800
  535. [    6.331653] i = 0, head_addr = 0xffffff800b87b8f0, data_addr = 0xffffff800b87ecb0
  536. [    6.339226] i = 1, head_addr = 0xffffff800b87b850, data_addr = 0xffffff800b87bcb0
  537. [    6.346800] i = 2, head_addr = 0xffffff800b87b918, data_addr = 0xffffff800b87ecb0
  538. [    6.354371] i = 3, head_addr = 0xffffff800b87b878, data_addr = 0xffffff800b87d4b0
  539. [    6.361945] <<<<<<<<<<<<<<mailbox_create_box cpu_id = 0>>>>>>>>>>>>>>
  540. [    6.368463] ******************func = mailbox_init_all_handle line = 530 src_id = 1 dst_id = 4******************
  541. [    6.378675] ******************func = mailbox_init_all_handle line = 530 src_id = 0 dst_id = 4******************
  542. [    6.388888] ******************func = mailbox_init_all_handle line = 530 src_id = 4 dst_id = 1******************
  543. [    6.399098] ******************func = mailbox_init_all_handle line = 530 src_id = 4 dst_id = 0******************
  544. [    6.410550] mb init OK!
  545. [    6.413614] mb->local_id = 0 dst_id = 0
  546. [    6.417502] hifi_misc [I][364249]:ap_ipc_int_init:914: Enter ap_ipc_int_init
  547. [    6.424635] hifi_misc [I][364483]:ap_ipc_int_init:919: Exit ap_ipc_int_init
  548. [    6.431776] usbcore: registered new interface driver snd-usb-audio
  549. [    6.438523] hisi_i2s e804f800.hisi_i2s: Registered as hisi_i2s
  550. [    6.444515] u32 classifier
  551. [    6.447246] Actions configured
  552. [    6.450692] Netfilter messages via NETLINK v0.30.
  553. [    6.455753] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  554. [    6.462232] ctnetlink v0.93: registering with nfnetlink.
  555. [    6.467984] xt_time: kernel timezone is -0000
  556. [    6.472822] ip_tables: (C) 2000-2006 Netfilter Core Team
  557. [    6.478266] arp_tables: arp_tables: (C) 2002 David S. Miller
  558. [    6.484315] Initializing XFRM netlink socket
  559. [    6.489433] NET: Registered protocol family 10
  560. [    6.495163] mip6: Mobile IPv6
  561. [    6.498177] ip6_tables: (C) 2000-2006 Netfilter Core Team
  562. [    6.504719] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
  563. [    6.510951] NET: Registered protocol family 17
  564. [    6.515458] NET: Registered protocol family 15
  565. [    6.519969] Bridge firewalling registered
  566. [    6.524618] Bluetooth: RFCOMM TTY layer initialized
  567. [    6.529562] Bluetooth: RFCOMM socket layer initialized
  568. [    6.534771] Bluetooth: RFCOMM ver 1.11
  569. [    6.538571] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  570. [    6.544565] Bluetooth: HIDP socket layer initialized
  571. [    6.549589] 8021q: 802.1Q VLAN Support v1.8
  572. [    6.553927] 9pnet: Installing 9P2000 support
  573. [    6.558833] Registered cp15_barrier emulation handler
  574. [    6.564232] Registered setend emulation handler
  575. [    6.568987] registered taskstats version 1
  576. [    6.574896] Btrfs loaded, crc32c=crc32c-arm64-hw
  577. [    6.584886] ffd74000.serial: ttyAMA3 at MMIO 0xffd74000 (irq = 21, base_baud = 0) is a PL011 rev2
  578. [    6.594215] fdf01000.serial: ttyAMA4 at MMIO 0xfdf01000 (irq = 22, base_baud = 0) is a PL011 rev2
  579. [    6.603328] serial serial0: tty port ttyAMA4 registered
  580. [    6.608680] uart-pl011 fdf01000.serial: no DMA platform data
  581. [    6.608901] ssp-pl022 ffd68000.spi: ARM PL022 driver, device ID: 0x00041022
  582. [    6.608934] ssp-pl022 ffd68000.spi: mapped registers from 0x00000000ffd68000 to ffffff800b8e9000
  583. [    6.608971] ssp-pl022 ffd68000.spi: setup for DMA on RX dma0chan0, TX dma0chan1
  584. [    6.609638] ssp-pl022 ff3b3000.spi: ARM PL022 driver, device ID: 0x00041022
  585. [    6.609667] ssp-pl022 ff3b3000.spi: mapped registers from 0x00000000ff3b3000 to ffffff800b8eb000
  586. [    6.609699] ssp-pl022 ff3b3000.spi: setup for DMA on RX dma0chan2, TX dma0chan3
  587. [    6.610619] rt1711_i2c_probe
  588. [    6.610621] I2C functionality : OK...
  589. [    6.612221] rt_parse_dt
  590. [    6.612228] rt1711h_chipID = 0x2171
  591. [    6.612232] regmap_device_register: name = rt1711-4e
  592. [    6.612257] rt_regmap_rt1711-4e: rt register cache data init
  593. [    6.612263] rt_regmap_rt1711-4e: cache cata init successfully
  594. [    6.612341] tcpc_device_register register tcpc device (type_c_port0)
  595. [    6.612407] [I/hisi_pd] tcpc_device_register register_pd_wake_unlock_notifier OK
  596. [    6.612409] PD Timer number = 37
  597. [    6.612622] tcpci_timer_init : init OK
  598. [    6.612804] pd_parse_pdata
  599. [    6.612813] pd_parse_pdata src pdo data =
  600. [    6.612815] pd_parse_pdata 0: 0x00019064
  601. [    6.612818] pd_parse_pdata snk pdo data =
  602. [    6.612820] pd_parse_pdata 0: 0x000190c8
  603. [    6.612821] pd_parse_pdata 1: 0x0002d0c8
  604. [    6.612823] pd_parse_pdata id vdos data =
  605. [    6.612825] pd_parse_pdata 0: 0xd00029cf
  606. [    6.612826] pd_parse_pdata 1: 0x00000000
  607. [    6.612828] pd_parse_pdata 2: 0x00010000
  608. [    6.612831] dpm_caps: local_dr_power
  609. [    6.612833] dpm_caps: local_dr_data
  610. [    6.612836] dpm_caps: local_ext_power
  611. [    6.612838] dpm_caps: local_usb_comm
  612. [    6.612839] dpm_caps: local_usb_suspend
  613. [    6.612841] dpm_caps: local_high_cap
  614. [    6.612843] dpm_caps: local_give_back
  615. [    6.612845] dpm_caps: local_no_suspend
  616. [    6.612846] dpm_caps: local_vconn_supply
  617. [    6.612848] dpm_caps: attemp_discover_cable_dfp
  618. [    6.612850] dpm_caps: attemp_enter_dp_mode
  619. [    6.612852] dpm_caps: attemp_discover_cable
  620. [    6.612853] dpm_caps: attemp_discover_id
  621. [    6.612855] dpm_caps: pr_reject_as_source
  622. [    6.612856] dpm_caps: pr_reject_as_sink
  623. [    6.612858] dpm_caps: pr_check_gp_source
  624. [    6.612860] dpm_caps: pr_check_gp_sink
  625. [    6.612861] dpm_caps: dr_reject_as_dfp
  626. [    6.612863] dpm_caps: dr_reject_as_ufp
  627. [    6.612864] dpm_caps: snk_prefer_low_voltage
  628. [    6.612866] dpm_caps: snk_ignore_mismatch_current
  629. [    6.612869] dpm_caps = 0xc010c10b
  630. [    6.612870] [I/hisi_pd] PE:pd_core_init\x0d
  631. [    6.613156] rt1711_init_alert name = type_c_port0
  632. [    6.613158] rt1711_init_alert gpio # = 291
  633. [    6.613165] GPIO requested...
  634. [    6.613169] rt1711_init_alert : IRQ number = 291
  635. [    6.613170] rt1711_init_alert : irq initialized...
  636. [    6.613337] IRQF_NO_THREAD Test\x0d
  637. [    6.614615] [I/hisi_pd] [TCPC-I]SkipAlert:0x0000\x0d
  638. [    6.616072] [I/hisi_pd] TPC-I:typec_init: DRP\x0d
  639. [    6.616447] [I/GPIO_HUB] gpio_hub_change_typec_power: set typec vbus gpio to 0
  640. [    6.616450] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in:1
  641. [    6.616451] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in otg:1
  642. [    6.616462] [E/GPIO_HUB] gpio_hub_switch_to_hub: switch to hub
  643. [    6.616463] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in:2
  644. [    6.616465] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in otg:2
  645. [    6.616466] [USB3][hisi_usb_otg_event]event: 2
  646. [    6.616480] [I/hisi_pd] TPC-I:** Unattached.SNK\x0d
  647. [    6.616481] [E/hisi_pd] typec_wait_ps_change: typec_wait_ps_change!!!+++++++++++
  648. [    6.616482] [E/hisi_pd] typec_wait_ps_change: typec_wait_ps_change!!!-----------
  649. [    6.616520] [USB3][event_work]+
  650. [    6.616532] [USB3][handle_event][handle_event] type: 2
  651. [    6.616540] [USB3][set_vbus_power]set port power 1
  652. [    6.616557] [dwc3_otg_work]+\x0a evt = 2
  653. [    6.616558] [dwc3_resume_device] +
  654. [    6.616704] [dwc3_resume_device] -
  655. [    6.616711] [dwc3_otg_start_host]+
  656. [    6.616715] tcpc_device_irq_enable : tcpc irq enable OK!
  657. [    6.616716] rt1711_i2c_probe probe OK!
  658. [    6.617412] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  659. [    6.617452] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
  660. [    6.617899] [I/hisi_pd] TPC-I:[CC_Alert] 0/5\x0d
  661. [    6.617908] [I/hisi_pd] TPC-I:** AttachWait.SNK\x0d
  662. [    6.622773] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x00010010
  663. [    6.622907] xhci-hcd xhci-hcd.0.auto: irq 337, io mem 0xff100000
  664. [    6.623327] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  665. [    6.623340] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  666. [    6.623351] usb usb1: Product: xHCI Host Controller
  667. [    6.623362] usb usb1: Manufacturer: Linux 4.9.77-geae6367a9237 xhci-hcd
  668. [    6.623372] usb usb1: SerialNumber: xhci-hcd.0.auto
  669. [    6.624574] hub 1-0:1.0: USB hub found
  670. [    6.624649] hub 1-0:1.0: 1 port detected
  671. [    6.625078] [drm] dss irq = 70.
  672. [    6.625078] [drm] dss_pri_clk:[400000000]->[400000000].
  673. [    6.625128] [drm] dss_pxl0_clk:[144000000]->[144000000].
  674. [    6.625133] get_domain_data_lpae:start_addr 0x8000, size 0xbfff8000 align 0x40000
  675. [    6.625255] [drm] host attach, client name=[adv7533], id=0
  676. [    6.625376] kirin-drm e8600000.dpe: bound e8601000.dsi (ops dsi_ops)
  677. [    6.625378] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  678. [    6.625379] [drm] No driver support for vblank timestamp query.
  679. [    6.625661] [drm] num_crtc=1, num_connector=1.
  680. [    6.625671] [drm:drm_helper_disable_unused_functions] *ERROR* Called for atomic driver, this is not what you want.
  681. [    6.625835] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  682. [    6.625859] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
  683. [    6.625944] kirin-drm e8600000.dpe: No connectors reported connected with modes
  684. [    6.625950] [drm] Cannot find any crtc or sizes - going 1024x768
  685. [    6.626046] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  686. [    6.626361] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
  687. [    6.626375] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  688. [    6.626386] usb usb2: Product: xHCI Host Controller
  689. [    6.626397] usb usb2: Manufacturer: Linux 4.9.77-geae6367a9237 xhci-hcd
  690. [    6.626408] usb usb2: SerialNumber: xhci-hcd.0.auto
  691. [    6.627562] hub 2-0:1.0: USB hub found
  692. [    6.627639] hub 2-0:1.0: 1 port detected
  693. [    6.628495] [dwc3_otg_start_host]-
  694. [    6.628502] [dwc3_otg_work]-
  695. [    6.628510] [USB3][hisi_dwc3_wake_lock]usb otg wake lock
  696. [    6.628522] [USB3][handle_event]hisi usb_status: OFF -> HOST
  697. [    6.628529] [USB3][event_work]-
  698. [    6.738261] [I/hisi_pd] TPC-I:[CC_Change] 0/5\x0d
  699. [    6.738270] [E/hisi_pd] typec_wait_ps_change: typec_wait_ps_change!!!+++++++++++
  700. [    6.738277] [E/hisi_pd] typec_wait_ps_change: typec_wait_ps_change!!!-----------
  701. [    6.738305] [I/GPIO_HUB] gpio_hub_power_off: gpio hub hub vbus no power set success
  702. [    6.738305] [I/GPIO_HUB] gpio_hub_change_typec_power: typec power no change
  703. [    6.738314] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in:3
  704. [    6.738321] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in otg:3
  705. [    6.738329] [USB3][hisi_usb_otg_event]event: 3
  706. [    6.738370] [E/GPIO_HUB] gpio_hub_switch_to_typec: switch to typec
  707. [    6.738393] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in:0
  708. [    6.738401] [USB3][hisi_usb_otg_event]hisi_usb_otg_event in otg:0
  709. [    6.738408] [USB3][hisi_usb_otg_event]event: 0
  710. [    6.738413] [USB3][hisi_usb_otg_event]schedule event_work wait:0]
  711. [    6.738418] [I/hisi_pd] TPC-I:** Attached.SNK\x0d
  712. [    6.738426] [E/hisi_pd] typec_wait_ps_change: typec_wait_ps_change!!!+++++++++++
  713. [    6.738432] [E/hisi_pd] typec_wait_ps_change: typec_wait_ps_change!!!-----------
  714. [    6.738614] [USB3][event_work]+
  715. [    6.738625] [USB3][handle_event][handle_event] type: 3
  716. [    6.738633] [USB3][set_vbus_power]set port power 0
  717. [    6.738642] [I/hisi_pd] pd_dpm_report_bc12 : PD_WAKE_UNLOCK
  718. [    6.738653] [I/hisi_pd] pd_dpm_report_bc12 : event (4)
  719. [    6.738660] [E/hisi_pd] pd_dpm_vbus_notifier_call: pd_dpm_vbus_notifier_call!!!,++++
  720. [    6.738676] [dwc3_otg_work]+\x0a evt = 1
  721. [    6.738676] [dwc3_otg_stop_host]+
  722. [    6.738805] xhci-hcd xhci-hcd.0.auto: remove, state 1
  723. [    6.738840] usb usb2: USB disconnect, device number 1
  724. [    6.739785] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=3,+++
  725. [    6.739796] [I/hisi_pd] pd_dpm_report_pd_sink_vbus : Sink 5000 mV, 500 mA
  726. [    6.739804] [E/hisi_pd] pd_dpm_vbus_notifier_call: pd_dpm_vbus_notifier_call!!!,++++
  727. [    6.739813] [I/hisi_pd] TPC-I:Attached-> SINK\x0d
  728. [    6.739820] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=7,+++
  729. [    6.739828] [I/hisi_pd] pd_dpm_set_typec_state = 2
  730. [    6.739835] [I/hisi_pd] pd_dpm_set_cc_orientation cc_orientation =1
  731. [    6.739863] [I/hisi_pd] [TCPC-I]usb_port_attached\x0d
  732. [    6.739926] [I/hisi_pd] pd_dpm_report_device_attach \x0d
  733. [    6.740073] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered
  734. [    6.740092] xhci-hcd xhci-hcd.0.auto: remove, state 1
  735. [    6.740126] usb usb1: USB disconnect, device number 1
  736. [    6.741510] xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered
  737. [    6.741623] [dwc3_otg_stop_host]-
  738. [    6.741630] [dwc3_suspend_device] +
  739. [    6.741918] [dwc3_suspend_device] -
  740. [    6.741925] [dwc3_otg_work]-
  741. [    6.741933] [USB3][hisi_dwc3_wake_unlock]usb otg wake unlock
  742. [    6.741944] [USB3][handle_event]hiusb_status: HOST -> OFF
  743. [    6.741955] [USB3][handle_event][handle_event] type: 0
  744. [    7.052791] [USB3][detect_charger_type]DCD done
  745. [    7.080810] [USB3][detect_charger_type]Primary Detection done
  746. [    7.080818] [USB3][detect_charger_type]Secondary Detection done
  747. [    7.108795] [USB3][detect_charger_type]type: 0
  748. [    7.108806] [I/hisi_pd] pd_dpm_report_bc12 : event (0)
  749. [    7.108814] [E/hisi_pd] pd_dpm_vbus_notifier_call: pd_dpm_vbus_notifier_call!!!,++++
  750. [    7.108829] [dwc3_otg_work]+\x0a evt = 3
  751. [    7.108829] [dwc3_resume_device] +
  752. [    7.108969] [dwc3_resume_device] -
  753. [    7.108977] [dwc3_otg_start_peripheral]+
  754. [    7.108985] [dwc3_otg_start_peripheral]-
  755. [    7.108992] [dwc3_otg_work]-
  756. [    7.109000] [USB3][hisi_dwc3_wake_lock]usb otg wake lock
  757. [    7.109011] [USB3][handle_event]hisi usb status: OFF -> DEVICE
  758. [    7.109018] [USB3][event_work]-
  759. [    7.117184] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=6,+++
  760. [    7.117192] [I/hisi_pd] pd_dpm_handle_pe_event  unkonw event \x0d
  761. [    7.117493] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=5,+++
  762. [    7.117502] Pending event is same --> ignore this event 2
  763. [    7.117643] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=3,+++
  764. [    7.557348] kirin-drm e8600000.dpe: fb0: dss frame buffer device
  765. [    7.580942] [drm] Initialized kirin 1.0.0 20170309 on minor 0
  766. [    7.587257] dwmmc_k3 ff3ff000.dwmmc2: fifo-depth property not found, using value of FIFOTH register as default
  767. [    7.599544] dwmmc_k3 ff3ff000.dwmmc2: IDMAC supports 64-bit address mode.
  768. [    7.606807] dwmmc_k3 ff3ff000.dwmmc2: Using internal DMA controller.
  769. [    7.613303] dwmmc_k3 ff3ff000.dwmmc2: Version ID is 270a
  770. [    7.618704] dwmmc_k3 ff3ff000.dwmmc2: DW MMC controller at irq 56,32 bit host data width,128 deep fifo
  771. [    7.685768] hci-ti serial0-0: Direct firmware load for ti-connectivity/TIInit_11.8.32.bts failed with error -2
  772. [    7.696008] hci-ti serial0-0: Falling back to user helper
  773. [    7.726824] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  774. [    7.752883] dwmmc_k3 ff3ff000.dwmmc2: 1 slots initialized
  775. [    7.759647] hisi_i2s e804f800.hisi_i2s: Failed to get DMA channel capabilities, falling back to period counting: -6
  776. [    7.770325] asoc-simple-card soc:sound: hdmi-hifi.0 <-> e804f800.hisi_i2s mapping ok
  777. [    7.782064] otg_wakelock_init: No USB transceiver found
  778. [    7.786451] dwmmc_k3 ff3ff000.dwmmc2: card claims to support voltages below defined range
  779. [    7.796121] input: keys as /devices/platform/keys/input/input0
  780. [    7.799497] mmc_host mmc1: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0)
  781. [    7.802633] mmc1: new SDIO card at address 0001
  782. [    7.803616] wl18xx_driver wl18xx.0.auto: Direct firmware load for ti-connectivity/wl18xx-conf.bin failed with error -2
  783. [    7.803619] wl18xx_driver wl18xx.0.auto: Falling back to user helper
  784. [    7.834184] rtc-pl031 fff04000.rtc: setting system clock to 1970-01-01 00:00:14 UTC (14)
  785. [    7.842636] ALSA device list:
  786. [    7.845638] #0: hikey-hdmi
  787. [    7.849068] Freeing unused kernel memory: 1152K
  788. [    7.855874] init: init first stage started!
  789. [    7.860242] init: Using Android DT directory /proc/device-tree/firmware/android/
  790. [    7.867780] init: First stage mount skipped (missing/incompatible fstab in device tree)
  791. [    7.875895] init: Skipped setting INIT_AVB_VERSION (not in recovery mode)
  792. [    7.882832] init: Loading SELinux policy
  793. [    7.889952] SELinux: 8192 avtab hash slots, 16640 rules.
  794. [    7.898684] SELinux: 8192 avtab hash slots, 16640 rules.
  795. [    7.904066] SELinux:  1 users, 4 roles, 1199 types, 0 bools, 1 sens, 1024 cats
  796. [    7.911386] SELinux:  93 classes, 16640 rules
  797. [    7.916915] SELinux:  Completing initialization.
  798. [    7.921588] SELinux:  Setting up existing superblocks.
  799. [    7.978901] audit: type=1403 audit(14.639:2): policy loaded auid=4294967295 ses=4294967295
  800. [    7.987471] selinux: SELinux: Loaded policy from /sepolicy\x0a
  801. [    7.996100] selinux: SELinux: Loaded file_contexts\x0a
  802. [    8.004486] init: init second stage started!
  803. [    8.012470] init: Using Android DT directory /proc/device-tree/firmware/android/
  804. [    8.020346] init: Init cannot set 'ro.boot.hardware' to 'HiKey960': Read-only property was already set
  805. [    8.030549] selinux: SELinux: Loaded file_contexts\x0a
  806. [    8.036907] init: Running restorecon...
  807. [    8.042048] selinux: SELinux:  Could not stat /dev/block: No such file or directory.\x0a
  808. [    8.051475] init: waitid failed: No child processes
  809. [    8.056441] init: Couldn't load property file '/system/etc/prop.default': open() failed: No such file or directory: No such file or directory
  810. [    8.069309] init: Couldn't load property file '/prop.default': open() failed: No such file or directory: No such file or directory
  811. [    8.081490] init: Couldn't load property file '/product/build.prop': open() failed: No such file or directory: No such file or directory
  812. [    8.109885] cgroup: init (1) created nested cgroup for controller "memory" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
  813. [    8.114372] ueventd: ueventd started!
  814. [    8.115125] selinux: SELinux: Loaded file_contexts\x0a
  815. [    8.115146] ueventd: Parsing file /ueventd.rc...
  816. [    8.115393] ueventd: Parsing file /vendor/ueventd.rc...
  817. [    8.115407] ueventd: Unable to read config file '/vendor/ueventd.rc': open() failed: No such file or directory
  818. [    8.115416] ueventd: Parsing file /odm/ueventd.rc...
  819. [    8.115427] ueventd: Unable to read config file '/odm/ueventd.rc': open() failed: No such file or directory
  820. [    8.115461] ueventd: Parsing file /ueventd.hikey960.rc...
  821. [    8.135764] ueventd: firmware: loading 'ti-connectivity/wl18xx-conf.bin' for '/devices/platform/soc/ff3ff000.dwmmc2/mmc_host/mmc1/mmc1:0001/mmc1:0001:2/wl18xx.0.auto/firmware/ti-connectivity!wl18xx-conf.bin'
  822. [    8.140715] ueventd: firmware: loading 'ti-connectivity/TIInit_11.8.32.bts' for '/devices/platform/soc/fdf01000.serial/serial0/serial0-0/firmware/ti-connectivity!TIInit_11.8.32.bts'
  823. [    8.210934] cgroup: "memory" requires setting use_hierarchy to 1 on the root
  824. [    8.218342] audit: type=1400 audit(14.879:3): avc:  denied  { create } for  pid=1 comm="init" name="cgroup.procs" scontext=u:r:init:s0 tcontext=u:object_r:cgroup:s0 tclass=file permissive=1
  825. [    8.244972] Registered swp emulation handler
  826. [    8.249689] audit: type=1400 audit(14.911:4): avc:  denied  { add_name } for  pid=1 comm="init" name="enabled" scontext=u:r:init:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=1
  827. [    8.266346] audit: type=1400 audit(14.927:5): avc:  denied  { create } for  pid=1 comm="init" name="enabled" scontext=u:r:init:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
  828. [    8.282920] audit: type=1400 audit(14.943:6): avc:  denied  { write } for  pid=1 comm="init" name="enabled" dev="sysfs" ino=5542 scontext=u:r:init:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
  829. [    8.301445] audit: type=1400 audit(14.963:7): avc:  denied  { open } for  pid=1 comm="init" path="/sys/kernel/mm/transparent_hugepage/enabled" dev="sysfs" ino=5542 scontext=u:r:init:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
  830. [    8.330342] EXT4-fs (sdd10): Ignoring removed nomblk_io_submit option
  831. [    8.342379] watchdogd: watchdogd started (interval 10, margin 20)!
  832. [    8.358583] EXT4-fs (sdd10): recovery complete
  833. [    8.363492] EXT4-fs (sdd10): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
  834. [    8.389267] EXT4-fs (sdd10): mounted filesystem with ordered data mode. Opts: (null)
  835. [    8.398746] EXT4-fs (sdd5): Ignoring removed nomblk_io_submit option
  836. [    8.408508] EXT4-fs (sdd5): recovery complete
  837. [    8.413811] EXT4-fs (sdd5): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
  838. [    8.442769] Bluetooth: hci0: change remote baud rate command in firmware
  839. [    8.507921] audit: type=1400 audit(15.167:8): avc:  denied  { read } for  pid=2064 comm="e2fsck" name="sdd5" dev="tmpfs" ino=11717 scontext=u:r:fsck:s0 tcontext=u:object_r:block_device:s0 tclass=blk_file permissive=1
  840. [    8.527472] audit: type=1400 audit(15.191:9): avc:  denied  { open } for  pid=2064 comm="e2fsck" path="/dev/block/sdd5" dev="tmpfs" ino=11717 scontext=u:r:fsck:s0 tcontext=u:object_r:block_device:s0 tclass=blk_file permissive=1
  841. [    8.547970] audit: type=1400 audit(15.207:10): avc:  denied  { write } for  pid=2064 comm="e2fsck" name="sdd5" dev="tmpfs" ino=11717 scontext=u:r:fsck:s0 tcontext=u:object_r:block_device:s0 tclass=blk_file permissive=1
  842. [    8.567675] audit: type=1400 audit(15.227:11): avc:  denied  { ioctl } for  pid=2064 comm="e2fsck" path="/dev/block/sdd5" dev="tmpfs" ino=11717 ioctlcmd=0x127c scontext=u:r:fsck:s0 tcontext=u:object_r:block_device:s0 tclass=blk_file permissive=1
  843. [    8.595304] e2fsck: e2fsck 1.43.3 (04-Sep-2016)\x0a
  844. [    8.601409] e2fsck: Pass 1: Checking inodes, blocks, and sizes\x0a
  845. [    8.608810] e2fsck: Pass 2: Checking directory structure\x0a
  846. [    8.615682] e2fsck: Pass 3: Checking directory connectivity\x0a
  847. [    8.622819] e2fsck: Pass 4: Checking reference counts\x0a
  848. [    8.629442] e2fsck: Pass 5: Checking group summary information\x0a
  849. [    8.636844] e2fsck: cache: 14/2048 files (7.1% non-contiguous), 1106/2048 blocks\x0a
  850. [    8.647952] EXT4-fs (sdd5): mounted filesystem with ordered data mode. Opts: discard,noauto_da_alloc,data=ordered,user_xattr,barrier=1
  851. [    8.676471] fsck.f2fs: Info: Fix the reported corruption.\x0a
  852. [    8.682970] wlcore: wl18xx HW: 183x or 180x, PG 2.2 (ROM 0x11)
  853. [    8.687290] wlcore: loaded
  854. [    8.692104] fsck.f2fs: Info: Segments per section = 1\x0a
  855. [    8.698733] fsck.f2fs: Info: Sections per zone = 1\x0a
  856. [    8.705476] F2FS-fs (sdd13): Magic Mismatch, valid(0xf2f52010) - read(0x180000)
  857. [    8.712894] F2FS-fs (sdd13): Can't find valid F2FS filesystem in 1th superblock
  858. [    8.720423] F2FS-fs (sdd13): Magic Mismatch, valid(0xf2f52010) - read(0x100000)
  859. [    8.727824] F2FS-fs (sdd13): Can't find valid F2FS filesystem in 2th superblock
  860. [    8.735234] F2FS-fs (sdd13): Magic Mismatch, valid(0xf2f52010) - read(0x180000)
  861. [    8.742635] F2FS-fs (sdd13): Can't find valid F2FS filesystem in 1th superblock
  862. [    8.750033] F2FS-fs (sdd13): Magic Mismatch, valid(0xf2f52010) - read(0x100000)
  863. [    8.757433] F2FS-fs (sdd13): Can't find valid F2FS filesystem in 2th superblock
  864. [    8.773445] F2FS-fs (sdd13): Magic Mismatch, valid(0xf2f52010) - read(0x180000)
  865. [    8.780871] F2FS-fs (sdd13): Can't find valid F2FS filesystem in 1th superblock
  866. [    8.788923] EXT4-fs (sdd13): Ignoring removed nomblk_io_submit option
  867. [    8.801507] EXT4-fs (sdd13): recovery complete
  868. [    8.806319] EXT4-fs (sdd13): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
  869. [    9.051941] EXT4-fs (sdd13): mounted filesystem with ordered data mode. Opts: discard,noauto_da_alloc,data=ordered,user_xattr,barrier=1
  870. [    9.065311] init: 20 output lines suppressed due to ratelimiting
  871. [    9.157773] file system registered
  872. [    9.298683] read descriptors
  873. [    9.301620] read strings
  874. [    9.656321] random: crng init done
  875. [    9.737057] android_work: sent uevent USB_STATE=CONNECTED
  876. [    9.746760] android_work: sent uevent USB_STATE=DISCONNECTED
  877. [    9.868679] android_work: sent uevent USB_STATE=CONNECTED
  878. [    9.881622] configfs-gadget gadget: high-speed config #1: b
  879. [    9.887419] android_work: sent uevent USB_STATE=CONFIGURED
  880. [   11.819811] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=6,+++
  881. [   11.825866] [I/hisi_pd] pd_dpm_handle_pe_event  unkonw event \x0d
  882. [   11.832165] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=5,+++
  883. [   11.838177] Pending event is same --> ignore this event 2
  884. [   11.843881] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=3,+++
  885. [   12.497927] android_work: sent uevent USB_STATE=DISCONNECTED
  886. [   14.088791] init: starting service 'hwservicemanager'...
  887. [   14.099011] audit_printk_skb: 27 callbacks suppressed
  888. [   14.099024] audit: type=1400 audit(20.759:21): avc:  denied  { create } for  pid=1 comm="init" name="cgroup.procs" scontext=u:r:init:s0 tcontext=u:object_r:cgroup:s0 tclass=file permissive=1
  889. [   14.138473] init: starting service 'btlinux-1.0'...
  890. [   14.149135] init: starting service 'configstore-hal-1-0'...
  891. [   14.158355] init: starting service 'memtrack-hal-1-0'...
  892. [   14.165588] init: Service 'hwservicemanager' (pid 2157) killed by signal 1
  893. [   14.173107] init: Sending signal 9 to service 'hwservicemanager' (pid 2157) process group...
  894. [   14.181818] libprocessgroup: Successfully killed process cgroup uid 1000 pid 2157 in 0ms
  895. [   14.190290] init: Sending signal 9 to service 'btlinux-1.0' (pid 2158) process group...
  896. [   14.198443] libprocessgroup: Successfully killed process cgroup uid 1002 pid 2158 in 0ms
  897. [   14.206753] init: Sending signal 9 to service 'cas-hal-1-0' (pid 2096) process group...
  898. [   14.231925] read descriptors
  899. [   14.235035] read strings
  900. [   14.585049] android_work: did not send uevent (0 0           (null))
  901. [   14.698596] android_work: sent uevent USB_STATE=CONNECTED
  902. [   14.705232] android_work: sent uevent USB_STATE=DISCONNECTED
  903. [   14.826037] android_work: sent uevent USB_STATE=CONNECTED
  904. [   14.837597] configfs-gadget gadget: high-speed config #1: b
  905. [   14.844766] android_work: sent uevent USB_STATE=CONFIGURED
  906. [   16.553802] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=6,+++
  907. [   16.559918] [I/hisi_pd] pd_dpm_handle_pe_event  unkonw event \x0d
  908. [   16.566226] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=5,+++
  909. [   16.572236] Pending event is same --> ignore this event 2
  910. [   16.577971] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=3,+++
  911. [   16.752252] EXT4-fs (sdd10): re-mounted. Opts: (null)
  912. [   19.103990] init: starting service 'hwservicemanager'...
  913. [   19.110973] audit: type=1400 audit(25.771:22): avc:  denied  { create } for  pid=1 comm="init" name="cgroup.procs" scontext=u:r:init:s0 tcontext=u:object_r:cgroup:s0 tclass=file permissive=1
  914. [   19.140503] init: Service 'hwservicemanager' (pid 2196) killed by signal 1
  915. [   19.147498] init: Sending signal 9 to service 'hwservicemanager' (pid 2196) process group...
  916. [   19.156127] libprocessgroup: Successfully killed process cgroup uid 1000 pid 2196 in 0ms
  917. [   19.164544] init: Sending signal 9 to service 'cas-hal-1-0' (pid 2183) process group...
  918. [   19.177927] libprocessgroup: Successfully killed process cgroup uid 1013 pid 2183 in 5ms
  919. [   19.188608] init: Service 'cas-hal-1-0' (pid 2183) killed by signal 9
  920. [   19.195855] init: starting service 'btlinux-1.0'...
  921. [   19.201680] init: starting service 'configstore-hal-1-0'...
  922. [   19.208522] init: starting service 'memtrack-hal-1-0'...
  923. [   21.284014] [I/hisi_pd] PE:TYPE-C Only Charger!\x0d
  924. [   21.288759] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=3,+++
  925. [   21.294733] [I/hisi_pd] pd_dpm_report_pd_sink_vbus : Sink 5000 mV, 500 mA
  926. [   21.301677] [E/hisi_pd] pd_dpm_vbus_notifier_call: pd_dpm_vbus_notifier_call!!!,++++
  927. [   21.309594] [E/hisi_pd] pd_dpm_handle_pe_event:!!!,event=8,+++
  928. [   24.116441] init: starting service 'hwservicemanager'...
  929. [   24.122650] audit: type=1400 audit(30.783:23): avc:  denied  { create } for  pid=1 comm="init" name="cgroup.procs" scontext=u:r:init:s0 tcontext=u:object_r:cgroup:s0 tclass=file permissive=1
  930. [   24.147016] init: Service 'hwservicemanager' (pid 2269) killed by signal 1
  931. [   24.153995] init: Sending signal 9 to service 'hwservicemanager' (pid 2269) process group...
  932. [   24.162625] libprocessgroup: Successfully killed process cgroup uid 1000 pid 2269 in 0ms
  933. [   24.171018] init: Sending signal 9 to service 'cas-hal-1-0' (pid 2221) process group...
  934. [   24.184362] libprocessgroup: Successfully killed process cgroup uid 1013 pid 2221 in 5ms
  935. [   24.192793] init: Service 'cas-hal-1-0' (pid 2221) killed by signal 9
  936. [   24.202021] init: starting service 'btlinux-1.0'...
  937. [   24.208704] init: starting service 'configstore-hal-1-0'...
  938. [   24.216989] init: starting service 'memtrack-hal-1-0'...
  939. [   24.260991] audit: type=1400 audit(30.923:24): avc:  denied  { create } for  pid=1 comm="init" name="cgroup.procs" scontext=u:r:init:s0 tcontext=u:object_r:cgroup:s0 tclass=file permissive=1
  940. [   29.130112] init: starting service 'hwservicemanager'...
  941. [   29.175523] init: Service 'hwservicemanager' (pid 2344) killed by signal 1
  942. [   29.182778] init: Sending signal 9 to service 'hwservicemanager' (pid 2344) process group...
  943. [   29.191545] libprocessgroup: Successfully killed process cgroup uid 1000 pid 2344 in 0ms
  944. [   29.200021] init: critical process 'hwservicemanager' exited 4 times in 4 minutes
  945. [   29.207634] init: Reboot start, reason: reboot, rebootTarget: bootloader
  946. [   29.223940] init: Shutdown timeout: 6000 ms
  947. [   29.228713] init: starting service 'blank_screen'...
  948. [   29.234485] init: starting service 'hwservicemanager'...
  949. [   29.240913] init: starting service 'vold'...
  950. [   29.297582] hifi_misc [I][1113904]:hifi_reboot_notifier:1378: reboot +.
  951. [   29.304346] hifi_misc [I][1114125]:hifi_reboot_notifier:1387: reboot -.
  952. [   29.312775] sd 0:0:0:3: [sdd] Synchronizing SCSI cache
  953. [   29.320909] sd 0:0:0:2: [sdc] Synchronizing SCSI cache
  954. [   29.326212] sd 0:0:0:1: [sdb] Synchronizing SCSI cache
  955. [   29.331688] sd 0:0:0:0: [sda] Synchronizing SCSI cache
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!