API tools faq
paste
rvdr

Untitled

rvdr
May 26th, 2026
128
0
Never
4
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 42.00 KB | Fixit | 0 0
raw download clone embed print report
  1. [177]HELLO! BOOT0 is starting!
  2. [180]BOOT0 commit : {9f6fab4f-dirty}
  3.  
  4. [187]EMMC 0x12
  5. [196]dram_para_total:0xf
  6. [199]vaild para:6 select dram para1
  7. [202][mmc]: mmc driver ver 2024-03-20 10:36
  8. [212][mmc]: Wrong media type 0x0, but host sdc2, try mmc first
  9. [218][mmc]: ***Try MMC card 2***
  10. [243][mmc]: RMCA OK!
  11. [246][mmc]: MMC 5.1
  12. [248][mmc]: HSSDR52/SDR25 8 bit
  13. [251][mmc]: 50000000 Hz
  14. [254][mmc]: 29820 MB
  15. [256][mmc]: ***SD/MMC 2 init OK!!!***
  16. [261]DRAM BOOT DRIVE INFO: V0.601
  17. [266]DRAM_VCC set to 560 mv
  18. [269]DRAM CLK =2400 MHZ
  19. [271]DRAM Type =9 (8:LPDDR4,9:LPDDR5)
  20. [423]Training result is = 7
  21. [426]DRAM Pstate 1 training, frequency is 1200 Mhz
  22. [608]Training result is = 7
  23. [611]DRAM Pstate 2 training, frequency is 800 Mhz
  24. [958]Training result is = 7
  25. [961]DRAM Pstate 3 training, frequency is 400 Mhz
  26. [1046]Training result is = 7
  27. [1049]DRAM Pstate 0 training, frequency is 2400 Mhz
  28. [1058]Actual DRAM SIZE =6144 M
  29. [1061]DRAM SIZE =6144 MBytes, para1 = a10a, para2 = 18001001, dram_tpr13 = 10065
  30. [1076]DRAM simple test OK.
  31. [1081]error:bad magic.
  32. [1116]error: dtb not found for scp
  33. [1119]tunning data addr:0x4a0003e8
  34. [1122]Jump to ATF: monitor_base = 0x48000000, uboot_base = 0x4a000000, optee_base = 0x0
  35. NOTICE: BL31: OP-TEE 32bit detected
  36. NOTICE: BL31: U-BOOT 32bit detected
  37. NOTICE: BL31: v2.5(debug):5fc237a6a
  38. NOTICE: BL31: Built : 09:05:28, Feb 26 2025
  39. NOTICE: BL31: No DTB found.
  40. ERROR: Error initializing runtime service opteed_fast
  41.  
  42.  
  43. U-Boot 2018.07-12-boot-aw2501-gb2d229198b2-dirty (Jan 06 2026 - 03:45:33 +0000) Allwinner Technology
  44.  
  45. [01.174]CPU: Allwinner Family
  46. [01.176]Model: Radxa Cubie A7A
  47. I2C: ready
  48. [01.238]DRAM: 6 GiB
  49. [01.247]Relocation Offset is: 75d89000
  50. [01.299]secure enable bit: 0
  51. [01.303]PMU: AXP8191
  52. [01.305]PMU: AXP8191 VER_A
  53. FDT ERROR:fdt_get_regulator_name:get property handle twi-supply error:FDT_ERR_INTERNAL
  54. [01.317]bmu_axp515_probe pmic_bus_read fail
  55. [01.321][AXP8191] onoff status: 0x50 = 0x1, 0x51 = 0x0
  56. [01.326][AXP8191] charge status: 0x4 = 0x0
  57. [01.329]CPU=1014 MHz,PLL6=1200 Mhz,AHB=200 Mhz, APB1=24Mhz MBus=600Mhz
  58. [01.336]gic: sec monitor mode
  59. SPI ALL: ready
  60. [01.380]flash init start
  61. [01.382]workmode = 0,storage type = 2
  62. [01.385][mmc]: mmc driver ver uboot2018:2024-10-18 9:01:00 -- uboot2018:2025-03-28 10:03:00
  63. [01.397][mmc]: SUNXI SDMMC Controller Version:0x50610
  64. [01.407][mmc]: 200 MHz...
  65. [01.409][mmc]: sample: 25 - 100(ps)
  66. [01.412][mmc]: ds: 25 - 100(ps)
  67. [01.430][mmc]: Best spd md: 4-HS400, freq: 5-200000000, Bus width: 8
  68. [01.436]sunxi flash init ok
  69. [01.440]Loading Environment from SUNXI_FLASH... OK
  70. No ethernet found.
  71. [01.478]NOT support bridge yet
  72. [01.480]Warn: no find panel or bridge
  73. [01.485]hdmi0@5520000 disconnected
  74. [01.488]drm hdmi get mode: 1920x1080@60Hz
  75. hdmi0@5520000: use force output detailed mode clock 148500 kHz, flags[5]
  76. H: 1920 2008 2052 2200
  77. V: 1080 1084 1089 1125
  78. bus_format: 0
  79. partno erro : can't find partition primary
  80. [01.514]primary is not found!
  81. partno erro : can't find partition boot-resource
  82. [01.522]boot-resource is not found!
  83. [01.525]Can not load logo.bmp file!
  84. [01.528]load logo fail
  85. [01.537]the secure storage item0 copy0 magic is bad
  86. [01.549]the secure storage item0 copy1 magic is bad
  87. [01.553]usb burn from boot
  88. delay time 0
  89. [01.560]usb prepare ok
  90. [01.863]overtime
  91. [01.867]do_burn_from_boot usb : no usb exist
  92. skip update boot_param
  93. cann't get the boot_base from the env
  94. [01.877]update part info
  95. [01.882]battery temp is -1
  96. [01.885]update bootcmd
  97. [01.893](not enough data: expected >= 8 cells, got 4 cells)
  98. Link up timeout
  99. Speed change timeout
  100. PCIe speed of Gen1
  101. Override default fdtfile to allwinner/sun60i-a733-cubie-a7a.dtb
  102. [04.332]libfdt fdt_check_header(): FDT_ERR_BADMAGIC
  103. [04.337][mmc]: can't find node "sunxi-mmc2" try "mmc"
  104. [04.342][mmc]: can't find node "mmc2"
  105. [04.346][mmc]: fdt err returned <no error>
  106. [04.351][mmc]: get sunxi-mmc2 string failed
  107. [04.356]The storage not support sample function
  108. [04.362]## error: update_fdt_dram_para_from_bootpara : FDT_ERR_NOTFOUND
  109. [04.369]chip id : 0x00005100 0x00004900 0x00004810 0x00001de2
  110. [04.374]mac addr => 08:51:49:58:ff:f1
  111. [04.377]chip id : 0x00005100 0x00004900 0x00004810 0x00001de2
  112. [04.383]mac addr => 08:51:49:58:ff:f0
  113. [04.387]/chosen/rng-seed node not exit
  114. [04.390]no battery, disabled battery functons
  115. [04.395]Could not find nodeoffset for bat_supply
  116. [04.399]update dts
  117. curr_device:2
  118. Device: SUNXI SD/MMC
  119. Manufacturer ID: 15
  120. OEM: 100
  121. Name: BJTD4
  122. Bus Speed: 200000000
  123. Mode : MMC legacy
  124. Rd Block Len: 512
  125. MMC version 5.1
  126. High Capacity: Yes
  127. Capacity: 29.1 GiB
  128. Bus Width: 8-bit DDR
  129. Erase Group Size: 512 KiB
  130. HC WP Group Size: 8 MiB
  131. User Capacity: 29.1 GiB WRREL
  132. Boot Capacity: 4 MiB ENH
  133. RPMB Capacity: 4 MiB ENH
  134. [ufs]info:Driver version 0.0.24 2024.12.30 16:00
  135. [ufs]info:Cal words 0x60:val 0xa6540000, 0x64:val 0x4d1f9542
  136. [ufs]err:uic c 16,uic a 0,1,0
  137. [ufs]err:e 80000010,0,0,0,0
  138. [ufs]err:int s 0,400
  139. [ufs]err:Device not present
  140. [ufs]err:wait device link startup failed
  141. [ufs]info:peer link startup timeout
  142. [ufs]info:Cal words 0x60:val 0xa6540000, 0x64:val 0x4d1f9542
  143. [ufs]err:uic c 16,uic a 0,1,0
  144. [ufs]err:e 80000010,0,0,0,0
  145. [ufs]err:int s 0,400
  146. [ufs]err:Device not present
  147. [ufs]err:wait device link startup failed
  148. [ufs]info:peer link startup timeout
  149. [ufs]info:Cal words 0x60:val 0xa6540000, 0x64:val 0x4d1f9542
  150. [ufs]err:uic c 16,uic a 0,1,0
  151. [ufs]err:e 80000010,0,0,0,0
  152. [ufs]err:int s 0,400
  153. [ufs]err:Device not present
  154. [ufs]err:wait device link startup failed
  155. [ufs]info:peer link startup timeout
  156. [ufs]info:Cal words 0x60:val 0xa6540000, 0x64:val 0x4d1f9542
  157. [ufs]err:uic c 16,uic a 0,1,0
  158. [ufs]err:e 80000010,0,0,0,0
  159. [ufs]err:int s 0,400
  160. [ufs]err:Device not present
  161. [ufs]err:wait device link startup failed
  162. [ufs]info:peer link startup timeout
  163. [ufs]err:link startup failed -6
  164. [ufs]err:ufshcd_probe() failed -6
  165. fail to init ufs
  166. sunxi_flash - sunxi_flash sub-system
  167.  
  168. Usage:
  169. sunxi_flash sunxi_flash init storage_type
  170. sunxi_flash read mem_addr part_name [size]
  171. sunxi_flash read_mtd mem_addr part_name [size]
  172. sunxi_flash write <mem_addr> <part_name> [size]
  173. sunxi_flash write <mem_addr> <part_name> [offset] [size]
  174. sunxi_flash write_mtd <mem_addr> <part_name>
  175. sunxi_flash boot0 force_dram_update_size <new_val>
  176. sunxi_flash boot0 force_dram_update_flag <new_val>
  177.  
  178. Hit any key to stop autoboot: 0
  179. starting USB...
  180. USB0: start sunxi USB-DRD...
  181. config usb clk ok
  182. sunxi USB-DRD init ok...
  183. USB EHCI 1.00
  184. scanning bus 0 for devices... 1 USB Device(s) found
  185. USB1: start sunxi USB1-Host...
  186. config usb clk ok
  187. sunxi USB1-Host init ok...
  188. USB EHCI 1.00
  189. scanning bus 1 for devices... 1 USB Device(s) found
  190. scanning usb for storage devices... 0 Storage Device(s) found
  191.  
  192. Device 0: device type unknown
  193. ... is now current device
  194. ** Bad device usb 0 **
  195. ** Bad device usb 0 **
  196. [09.326][mmc]: MMC Device 0 not found
  197. no mmc device at slot 0
  198. Scanning PCI devices on bus 1
  199. BusDevFun VendorId DeviceId Device Class Sub-Class
  200. _____________________________________________________________
  201.  
  202. Device 0: unknown device
  203. ufs has init
  204. sunxi_flash_ufs - check sunxi UFS state; only dev 0 is valid
  205.  
  206. Usage:
  207. sunxi_flash_ufs dev <n>
  208. return 0 for successful UFS initialization, -1 otherwise.
  209.  
  210. [09.362][mmc]: MMC Device 1 not found
  211. no mmc device at slot 1
  212. mmc2(part 0) is current device
  213. Scanning mmc 2:1...
  214. Found U-Boot script /boot.scr
  215. 5041 bytes read in 1 ms (4.8 MiB/s)
  216. ## Executing script at 4fc00000
  217. subfdt=sun60i-a733-cubie-a7a.dtb
  218. U-boot loaded from SD
  219. Boot script loaded from mmc
  220. 425 bytes read in 1 ms (415 KiB/s)
  221. subfdt=sun60i-a733-cubie-a7a.dtb
  222. Load fdt: /dtb/allwinner/sun60i-a733-cubie-a7a.dtb
  223. 181288 bytes read in 4 ms (43.2 MiB/s)
  224. 26204672 bytes read in 81 ms (308.5 MiB/s)
  225. 23741594 bytes read in 74 ms (306 MiB/s)
  226. [09.714]The storage not support sample function
  227. [09.793]mac addr => 08:51:49:58:ff:f1
  228. [09.797]mac addr => 08:51:49:58:ff:f0
  229. [09.802]no battery, disabled battery functons
  230. [09.806]Could not find nodeoffset for bat_supply
  231. [09.810]update dts
  232. stop sunxi USB-DRD ok...
  233. stop sunxi USB1-Host ok...
  234. Loading Ramdisk to 4895b000, end 49fff49a ... OK
  235. ERROR: reserving fdt memory region failed (addr=48000000 size=1000000)
  236. [09.866]Starting kernel ...
  237.  
  238. [09.869]total: 9869 ms
  239.  
  240. [09.871][mmc]: mmc exit start
  241. [09.890][mmc]: mmc 2 exit ok
  242. NOTICE: [SCP] :wait arisc ready....
  243. NOTICE: [SCP] :arisc version: [d463b9da43dc50320f21ba51c6c51afe2db20d83]
  244. NOTICE: [SCP] :arisc startup ready
  245. NOTICE: [SCP] :arisc startup notify message feedback
  246. NOTICE: [SCP] :sunxi-arisc driver is starting
  247. NOTICE: BL3-1: Next image address = 0x40200000
  248. NOTICE: BL3-1: Next image spsr = 0x3c5
  249. [ 0.000000][ T0] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
  250. [ 0.000000][ T0] Linux version 6.18.19-edge-sun60iw2 (build@armbian) (aarch64-linux-gnu-gcc (Debian 14.2.0-19) 14.2.0, GNU ld (GNU Binutils for Debian) 2.44) #4 SMP PREEMPT Thu Apr 23 17:28:31 UTC 2026
  251. [ 0.000000][ T0] KASLR disabled due to lack of seed
  252. [ 0.000000][ T0] random: crng init done
  253. [ 0.000000][ T0] Machine model: sun60iw2
  254. [ 0.000000][ T0] efi: UEFI not found.
  255. [ 0.000000][ T0] OF: reserved mem: 0x0000000048000000..0x0000000048ffffff (16384 KiB) map non-reusable bl31
  256. [ 0.000000][ T0] NUMA: Faking a node at [mem 0x0000000040000000-0x00000001bfffffff]
  257. [ 0.000000][ T0] NODE_DATA(0) allocated [mem 0x1bf30abc0-0x1bf30d33f]
  258. [ 0.000000][ T0] Zone ranges:
  259. [ 0.000000][ T0] DMA [mem 0x0000000040000000-0x00000000ffffffff]
  260. [ 0.000000][ T0] DMA32 empty
  261. [ 0.000000][ T0] Normal [mem 0x0000000100000000-0x00000001bfffffff]
  262. [ 0.000000][ T0] Movable zone start for each node
  263. [ 0.000000][ T0] Early memory node ranges
  264. [ 0.000000][ T0] node 0: [mem 0x0000000040000000-0x00000001bfffffff]
  265. [ 0.000000][ T0] Initmem setup node 0 [mem 0x0000000040000000-0x00000001bfffffff]
  266. [ 0.000000][ T0] cma: Reserved 32 MiB at 0x00000000fe000000
  267. [ 0.000000][ T0] psci: probing for conduit method from DT.
  268. [ 0.000000][ T0] psci: PSCIv1.1 detected in firmware.
  269. [ 0.000000][ T0] psci: Using standard PSCI v0.2 function IDs
  270. [ 0.000000][ T0] psci: MIGRATE_INFO_TYPE not supported.
  271. [ 0.000000][ T0] psci: SMC Calling Convention v1.2
  272. [ 0.000000][ T0] percpu: Embedded 25 pages/cpu s62104 r8192 d32104 u102400
  273. [ 0.000000][ T0] Detected VIPT I-cache on CPU0
  274. [ 0.000000][ T0] CPU features: detected: GICv3 CPU interface
  275. [ 0.000000][ T0] CPU features: detected: Qualcomm erratum 1009, or ARM erratum 1286807, 2441009
  276. [ 0.000000][ T0] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
  277. [ 0.000000][ T0] alternatives: applying boot alternatives
  278. [ 0.000000][ T0] Kernel command line: root=UUID=92eacacc-dabe-4bec-97f2-a905f94e50bb rootwait rootfstype=ext4 splash plymouth.ignore-serial-consoles console=ttyS0,115200 console=tty1 consoleblank=0 loglevel=7 ubootpart=47f0bfc0-b6a2-4318-897a-18bf0c477da6 usb-storage.quirks= mac_addr= coherent_pool=2M irqchip.gicv3_pseudo_nmi=0 cgroup_enable=cpuset cgroup_memory=1 swapaccount=1 kasan=off no_console_suspend fsck.fix=yes fsck.repair=yes net.ifnames=0 cgroup_enable=memory
  279. [ 0.000000][ T0] Unknown kernel command line parameters "splash ubootpart=47f0bfc0-b6a2-4318-897a-18bf0c477da6 mac_addr= cgroup_enable=memory cgroup_memory=1", will be passed to user space.
  280. [ 0.000000][ T0] printk: log buffer data + meta data: 131072 + 458752 = 589824 bytes
  281. [ 0.000000][ T0] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
  282. [ 0.000000][ T0] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
  283. [ 0.000000][ T0] software IO TLB: area num 8.
  284. [ 0.000000][ T0] software IO TLB: mapped [mem 0x00000000fa000000-0x00000000fe000000] (64MB)
  285. [ 0.000000][ T0] Fallback order for Node 0: 0
  286. [ 0.000000][ T0] Built 1 zonelists, mobility grouping on. Total pages: 1572864
  287. [ 0.000000][ T0] Policy zone: Normal
  288. [ 0.000000][ T0] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
  289. [ 0.000000][ T0] stackdepot: allocating hash table via alloc_large_system_hash
  290. [ 0.000000][ T0] stackdepot hash table entries: 524288 (order: 11, 8388608 bytes, linear)
  291. [ 0.000000][ T0] stackdepot: allocating space for 8192 stack pools via memblock
  292. [ 0.000000][ T0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
  293. [ 0.000000][ T0] rcu: Preemptible hierarchical RCU implementation.
  294. [ 0.000000][ T0] rcu: RCU event tracing is enabled.
  295. [ 0.000000][ T0] Trampoline variant of Tasks RCU enabled.
  296. [ 0.000000][ T0] Tracing variant of Tasks RCU enabled.
  297. [ 0.000000][ T0] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  298. [ 0.000000][ T0] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
  299. [ 0.000000][ T0] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
  300. [ 0.000000][ T0] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  301. [ 0.000000][ T0] GICv3: 256 SPIs implemented
  302. [ 0.000000][ T0] GICv3: 0 Extended SPIs implemented
  303. [ 0.000000][ T0] Root IRQ handler: gic_handle_irq
  304. [ 0.000000][ T0] GICv3: GICv3 features: 16 PPIs
  305. [ 0.000000][ T0] GICv3: GICD_CTLR.DS=0, SCR_EL3.FIQ=0
  306. [ 0.000000][ T0] GICv3: CPU0: found redistributor 0 region 0:0x0000000003460000
  307. [ 0.000000][ T0] ITS: No ITS available, not enabling LPIs
  308. [ 0.000000][ T0] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@100[1] /cpus/cpu@200[2] /cpus/cpu@300[3] /cpus/cpu@400[4] /cpus/cpu@500[5] }
  309. [ 0.000000][ T0] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@600[6] /cpus/cpu@700[7] }
  310. [ 0.000000][ T0] rcu: srcu_init: Setting srcu_struct sizes based on contention.
  311. [ 0.000000][ T0] arch_timer: cp15 timer running at 24.00MHz (virt).
  312. [ 0.000000][ T0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  313. [ 0.000000][ T0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  314. [ 0.000243][ T0] sunxi:timer_sun50i:[ERR]: request bus clock failed
  315. [ 0.000247][ T0] sunxi:timer_sun50i:[ERR]: sun50i timer of resource get failed
  316. [ 0.001477][ T0] Console: colour dummy device 80x25
  317. [ 0.001491][ T0] printk: legacy console [tty1] enabled
  318. [ 0.002297][ T0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
  319. [ 0.002326][ T0] pid_max: default: 32768 minimum: 301
  320. [ 0.002462][ T0] LSM: initializing lsm=capability,selinux
  321. [ 0.002535][ T0] SELinux: Initializing.
  322. [ 0.003032][ T0] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
  323. [ 0.003076][ T0] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
  324. [ 0.004476][ T1] cacheinfo: Unable to detect cache hierarchy for CPU 0
  325. [ 0.005571][ T1] rcu: Hierarchical SRCU implementation.
  326. [ 0.005592][ T1] rcu: Max phase no-delay instances is 1000.
  327. [ 0.005821][ T1] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
  328. [ 0.007173][ T1] EFI services will not be available.
  329. [ 0.007619][ T1] smp: Bringing up secondary CPUs ...
  330. [ 0.008271][ T0] Detected VIPT I-cache on CPU1
  331. [ 0.008341][ T0] GICv3: CPU1: found redistributor 100 region 0:0x0000000003480000
  332. [ 0.008384][ T0] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
  333. [ 0.009055][ T0] Detected VIPT I-cache on CPU2
  334. [ 0.009119][ T0] GICv3: CPU2: found redistributor 200 region 0:0x00000000034a0000
  335. [ 0.009154][ T0] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
  336. [ 0.009783][ T0] Detected VIPT I-cache on CPU3
  337. [ 0.009839][ T0] GICv3: CPU3: found redistributor 300 region 0:0x00000000034c0000
  338. [ 0.009871][ T0] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
  339. [ 0.010503][ T0] Detected VIPT I-cache on CPU4
  340. [ 0.010557][ T0] GICv3: CPU4: found redistributor 400 region 0:0x00000000034e0000
  341. [ 0.010585][ T0] CPU4: Booted secondary processor 0x0000000400 [0x412fd050]
  342. [ 0.011195][ T0] Detected VIPT I-cache on CPU5
  343. [ 0.011250][ T0] GICv3: CPU5: found redistributor 500 region 0:0x0000000003500000
  344. [ 0.011277][ T0] CPU5: Booted secondary processor 0x0000000500 [0x412fd050]
  345. [ 0.011889][ T0] CPU features: detected: Spectre-v4
  346. [ 0.011895][ T0] CPU features: detected: Spectre-BHB
  347. [ 0.011900][ T0] CPU features: detected: SSBS not fully self-synchronizing
  348. [ 0.011902][ T0] Detected PIPT I-cache on CPU6
  349. [ 0.011935][ T0] GICv3: CPU6: found redistributor 600 region 0:0x0000000003520000
  350. [ 0.011950][ T0] CPU6: Booted secondary processor 0x0000000600 [0x414fd0b1]
  351. [ 0.012560][ T0] Detected PIPT I-cache on CPU7
  352. [ 0.012599][ T0] GICv3: CPU7: found redistributor 700 region 0:0x0000000003540000
  353. [ 0.012615][ T0] CPU7: Booted secondary processor 0x0000000700 [0x414fd0b1]
  354. [ 0.012700][ T1] smp: Brought up 1 node, 8 CPUs
  355. [ 0.012965][ T1] SMP: Total of 8 processors activated.
  356. [ 0.012979][ T1] CPU: All CPU(s) started at EL1
  357. [ 0.013002][ T1] CPU features: detected: 32-bit EL0 Support
  358. [ 0.013017][ T1] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
  359. [ 0.013036][ T1] CPU features: detected: Common not Private translations
  360. [ 0.013051][ T1] CPU features: detected: CRC32 instructions
  361. [ 0.013070][ T1] CPU features: detected: RCpc load-acquire (LDAPR)
  362. [ 0.013085][ T1] CPU features: detected: LSE atomic instructions
  363. [ 0.013099][ T1] CPU features: detected: Privileged Access Never
  364. [ 0.013113][ T1] CPU features: detected: PMUv3
  365. [ 0.013126][ T1] CPU features: detected: RAS Extension Support
  366. [ 0.013144][ T1] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
  367. [ 0.013222][ T1] alternatives: applying system-wide alternatives
  368. [ 0.016769][ T1] CPU features: detected: Hardware dirty bit management on CPU6-7
  369. [ 0.017327][ T1] Memory: 5993480K/6291456K available (15744K kernel code, 2294K rwdata, 5760K rodata, 1664K init, 488K bss, 258836K reserved, 32768K cma-reserved)
  370. [ 0.019268][ T1] devtmpfs: initialized
  371. [ 0.031938][ T1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  372. [ 0.031973][ T1] posixtimers hash table entries: 4096 (order: 4, 65536 bytes, linear)
  373. [ 0.032037][ T1] futex hash table entries: 2048 (131072 bytes on 1 NUMA nodes, total 128 KiB, linear).
  374. [ 0.032217][ T1] 26224 pages in range for non-PLT usage
  375. [ 0.032221][ T1] 517744 pages in range for PLT usage
  376. [ 0.032376][ T1] pinctrl core: initialized pinctrl subsystem
  377. [ 0.032665][ T1] DMI not present or invalid.
  378. [ 0.032781][ T1] NET: Registered PF_NETLINK/PF_ROUTE protocol family
  379. [ 0.033400][ T1] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
  380. [ 0.033552][ T1] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
  381. [ 0.033679][ T1] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
  382. [ 0.033705][ T1] audit: initializing netlink subsys (disabled)
  383. [ 0.033804][ T67] audit: type=2000 audit(0.032:1): state=initialized audit_enabled=0 res=1
  384. [ 0.033961][ T1] thermal_sys: Registered thermal governor 'fair_share'
  385. [ 0.033965][ T1] thermal_sys: Registered thermal governor 'step_wise'
  386. [ 0.033974][ T1] thermal_sys: Registered thermal governor 'user_space'
  387. [ 0.033979][ T1] thermal_sys: Registered thermal governor 'power_allocator'
  388. [ 0.034006][ T1] cpuidle: using governor menu
  389. [ 0.034136][ T1] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  390. [ 0.034254][ T1] ASID allocator initialised with 65536 entries
  391. [ 0.034332][ T1] Serial: AMBA PL011 UART driver
  392. [ 0.044627][ T1] /soc@3000000/de@5000000: Fixed dependency cycle(s) with /soc@3000000/tcon4@5731000
  393. [ 0.044652][ T1] /soc@3000000/de@5000000: Fixed dependency cycle(s) with /soc@3000000/tcon3@5730000
  394. [ 0.044684][ T1] /soc@3000000/tcon3@5730000: Fixed dependency cycle(s) with /soc@3000000/hdmi0@5520000
  395. [ 0.044697][ T1] /soc@3000000/tcon3@5730000: Fixed dependency cycle(s) with /soc@3000000/de@5000000
  396. [ 0.044717][ T1] /soc@3000000/tcon4@5731000: Fixed dependency cycle(s) with /soc@3000000/de@5000000
  397. [ 0.044736][ T1] /soc@3000000/hdmi0@5520000: Fixed dependency cycle(s) with /soc@3000000/tcon3@5730000
  398. [ 0.045126][ T1] sunxi:ccu-ng:[INFO]: sunxi rtc-ccu version: 0.5.5
  399. [ 0.045135][ T1] AW BSP version: afa7aabb90, 2026-05-20 15:33:24, RadxaOS SDK
  400. [ 0.045192][ T1] sunxi:ccu-ng:[INFO]: rtc_ccu: sunxi ccu init OK
  401. [ 0.045198][ T1] sunxi:ccu-ng:[INFO]: sunxi ccu common driver version: 1.2.4
  402. [ 0.052830][ T1] sunxi:ccu-ng:[INFO]: cpupll_ccu: sunxi ccu init OK
  403. [ 0.052839][ T1] sunxi:ccu-ng:[INFO]: sunxi pll_cpu driver version: 0.0.5
  404. [ 0.053071][ T1] sunxi:ccu-ng:[INFO]: ccu will stop clk in init process
  405. [ 0.053206][ T1] null-device:msilite0-ahb-gate: connection ID is greater than 16
  406. [ 0.053216][ T1] null-device:usb-sys-ahb-gate: connection ID is greater than 16
  407. [ 0.053230][ T1] null-device:vid-out1-ahb-gate: connection ID is greater than 16
  408. [ 0.053238][ T1] null-device:vid-out0-ahb-gate: connection ID is greater than 16
  409. [ 0.053249][ T1] null-device:msilite2-mbus-gate: connection ID is greater than 16
  410. [ 0.053259][ T1] null-device:msilite0-mbus-gate: connection ID is greater than 16
  411. [ 0.053266][ T1] null-device:serdes-mbus-gate: connection ID is greater than 16
  412. [ 0.053274][ T1] null-device:vid-in-mbus-gate: connection ID is greater than 16
  413. [ 0.053284][ T1] null-device:ve-dec-mbus-gate: connection ID is greater than 16
  414. [ 0.053298][ T1] null-device:iommu1-mbus-gate: connection ID is greater than 16
  415. [ 0.053305][ T1] null-device:iommu0-mbus-gate: connection ID is greater than 16
  416. [ 0.053568][ T1] null-device:vo0-tconlcd0-bus: connection ID is greater than 16
  417. [ 0.053578][ T1] null-device:vo0-tconlcd1-bus: connection ID is greater than 16
  418. [ 0.053587][ T1] null-device:vo0-tconlcd2-bus: connection ID is greater than 16
  419. [ 0.053665][ T1] null-device:pll-peri0-2x-auto: connection ID is greater than 16
  420. [ 0.053673][ T1] null-device:pll-peri0-800m-auto: connection ID is greater than 16
  421. [ 0.053681][ T1] null-device:pll-peri0-600m-auto: connection ID is greater than 16
  422. [ 0.053688][ T1] null-device:pll-peri0-480m-all-auto: connection ID is greater than 16
  423. [ 0.053701][ T1] null-device:pll-peri0-480m-auto: connection ID is greater than 16
  424. [ 0.053709][ T1] null-device:pll-peri0-160m-auto: connection ID is greater than 16
  425. [ 0.053718][ T1] null-device:pll-peri0-300m-all-auto: connection ID is greater than 16
  426. [ 0.053726][ T1] null-device:pll-peri0-300m-auto: connection ID is greater than 16
  427. [ 0.053734][ T1] null-device:pll-peri0-150m-auto: connection ID is greater than 16
  428. [ 0.053741][ T1] null-device:pll-peri0-400m-all-auto: connection ID is greater than 16
  429. [ 0.053749][ T1] null-device:pll-peri0-400m-auto: connection ID is greater than 16
  430. [ 0.053757][ T1] null-device:pll-peri0-200m-auto: connection ID is greater than 16
  431. [ 0.053765][ T1] null-device:pll-peri1-800m-auto: connection ID is greater than 16
  432. [ 0.053772][ T1] null-device:pll-peri1-600m-all-auto: connection ID is greater than 16
  433. [ 0.053780][ T1] null-device:pll-peri1-600m-auto: connection ID is greater than 16
  434. [ 0.053788][ T1] null-device:pll-peri1-480m-all-auto: connection ID is greater than 16
  435. [ 0.053796][ T1] null-device:pll-peri1-480m-auto: connection ID is greater than 16
  436. [ 0.053803][ T1] null-device:pll-peri1-160m-auto: connection ID is greater than 16
  437. [ 0.053811][ T1] null-device:pll-peri1-300m-all-auto: connection ID is greater than 16
  438. [ 0.053819][ T1] null-device:pll-peri1-300m-auto: connection ID is greater than 16
  439. [ 0.053827][ T1] null-device:pll-peri1-150m-auto: connection ID is greater than 16
  440. [ 0.053835][ T1] null-device:pll-peri1-400m-all-auto: connection ID is greater than 16
  441. [ 0.053842][ T1] null-device:pll-peri1-400m-auto: connection ID is greater than 16
  442. [ 0.053850][ T1] null-device:pll-peri1-200m-auto: connection ID is greater than 16
  443. [ 0.053858][ T1] null-device:pll-video2-3x-auto: connection ID is greater than 16
  444. [ 0.053865][ T1] null-device:pll-video1-3x-auto: connection ID is greater than 16
  445. [ 0.053873][ T1] null-device:pll-video0-3x-auto: connection ID is greater than 16
  446. [ 0.053882][ T1] null-device:pll-video2-4x-auto: connection ID is greater than 16
  447. [ 0.053890][ T1] null-device:pll-video1-4x-auto: connection ID is greater than 16
  448. [ 0.053898][ T1] null-device:pll-video0-4x-auto: connection ID is greater than 16
  449. [ 0.053910][ T1] null-device:pll-audio1-div5-auto: connection ID is greater than 16
  450. [ 0.053917][ T1] null-device:pll-audio1-div2-auto: connection ID is greater than 16
  451. [ 0.053925][ T1] null-device:pll-audio1-4x-auto: connection ID is greater than 16
  452. [ 0.053939][ T1] sunxi:ccu-ng:[INFO]: ccu: sunxi ccu init OK
  453. [ 0.053948][ T1] sunxi:ccu-ng:[INFO]: sunxi ccu driver version: 1.0.17
  454. [ 0.054116][ T1] sunxi:ccu-ng:[INFO]: r_ccu: sunxi ccu init OK
  455. [ 0.054123][ T1] sunxi:ccu-ng:[INFO]: sunxi ccu driver version: 0.5.6
  456. [ 0.054728][ T1] sunxi:pin:[INFO]: sunxi pinctrl version: 0.6.8
  457. [ 0.060048][ T1] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation.
  458. [ 0.060630][ T1] sunxi:pin-2000000.pinctrl:[INFO]: pinctrl withstand voltage config mode=auto_hard
  459. [ 0.060640][ T1] sunxi:pin:[INFO]: sunxi pinctrl core driver version: 1.4.11
  460. [ 0.060867][ T1] sunxi:pin:[INFO]: sunxi r-pinctrl version: 0.0.2
  461. [ 0.061859][ T1] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation.
  462. [ 0.062028][ T1] sunxi:pin-7025000.pinctrl:[INFO]: pinctrl withstand voltage config mode=auto_hard
  463. [ 0.064837][ T1] /soc@3000000/de@5000000: Fixed dependency cycle(s) with /soc@3000000/tcon4@5731000
  464. [ 0.064855][ T1] /soc@3000000/de@5000000: Fixed dependency cycle(s) with /soc@3000000/tcon3@5730000
  465. [ 0.065144][ T1] /soc@3000000/de@5000000: Fixed dependency cycle(s) with /soc@3000000/tcon3@5730000
  466. [ 0.065175][ T1] /soc@3000000/tcon3@5730000: Fixed dependency cycle(s) with /soc@3000000/hdmi0@5520000
  467. [ 0.065186][ T1] /soc@3000000/tcon3@5730000: Fixed dependency cycle(s) with /soc@3000000/de@5000000
  468. [ 0.065277][ T1] /soc@3000000/de@5000000: Fixed dependency cycle(s) with /soc@3000000/tcon4@5731000
  469. [ 0.065312][ T1] /soc@3000000/tcon4@5731000: Fixed dependency cycle(s) with /soc@3000000/de@5000000
  470. [ 0.065410][ T1] /soc@3000000/tcon3@5730000: Fixed dependency cycle(s) with /soc@3000000/hdmi0@5520000
  471. [ 0.065438][ T1] /soc@3000000/hdmi0@5520000: Fixed dependency cycle(s) with /soc@3000000/tcon3@5730000
  472. [ 0.066218][ T1] /soc@3000000/pcie@6000000: Fixed dependency cycle(s) with /soc@3000000/pcie@6000000/legacy-interrupt-controller
  473. [ 0.067402][ T1] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
  474. [ 0.067413][ T1] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
  475. [ 0.067420][ T1] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
  476. [ 0.067426][ T1] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
  477. [ 0.067432][ T1] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
  478. [ 0.067438][ T1] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
  479. [ 0.067444][ T1] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
  480. [ 0.067450][ T1] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
  481. [ 0.068375][ T1] fbcon: Taking over console
  482. [ 0.068741][ T1] iommu: Default domain type: Translated
  483. [ 0.068749][ T1] iommu: DMA domain TLB invalidation policy: strict mode
  484. [ 0.068959][ T77] sunxi:pin-7025000.pinctrl:[INFO]: Auto power withstand voltage configuration detected, automatically exit!
  485. [ 0.069589][ T1] SCSI subsystem initialized
  486. [ 0.069691][ T1] usbcore: registered new interface driver usbfs
  487. [ 0.069709][ T1] usbcore: registered new interface driver hub
  488. [ 0.069724][ T1] usbcore: registered new device driver usb
  489. [ 0.069936][ T1] mc: Linux media interface: v0.10
  490. [ 0.069963][ T1] videodev: Linux video capture interface: v2.00
  491. [ 0.070011][ T1] EDAC MC: Ver: 3.0.0
  492. [ 0.070184][ T1] scmi_core: SCMI protocol bus registered
  493. [ 0.070386][ T1] FPGA manager framework
  494. [ 0.077465][ T1] sun6i-dma 4601000.dma-controller: sunxi dma probed, driver version: 1.2.6
  495. [ 0.077650][ T1] iommu_master csi_iommu: attach fail:-517
  496. [ 0.077689][ T1] sunxi-iommu-v2 3900000.iommu: master probe failed with -517
  497. [ 0.077884][ T1] vgaarb: loaded
  498. [ 0.078058][ T1] sunxi:pwm-2527000.pwm:[INFO]: start probe
  499. [ 0.078374][ T1] sunxi:pwm-2527000.pwm:[INFO]: pwmchip probe success
  500. [ 0.078417][ T1] sunxi:pwm-2528000.pwm:[INFO]: start probe
  501. [ 0.078652][ T1] sunxi:pwm-2528000.pwm:[INFO]: pwmchip probe success
  502. [ 0.078693][ T1] sunxi:pwm-7023000.pwm:[INFO]: start probe
  503. [ 0.078936][ T1] sunxi:pwm-7023000.pwm:[INFO]: pwmchip probe success
  504. [ 0.079156][ T1] clocksource: Switched to clocksource arch_sys_counter
  505. [ 0.079293][ T1] VFS: Disk quotas dquot_6.6.0
  506. [ 0.079310][ T1] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  507. [ 0.083812][ T1] NET: Registered PF_INET protocol family
  508. [ 0.083997][ T1] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
  509. [ 0.087867][ T1] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
  510. [ 0.087930][ T1] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
  511. [ 0.087944][ T1] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
  512. [ 0.088349][ T1] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
  513. [ 0.089877][ T1] TCP: Hash tables configured (established 65536 bind 65536)
  514. [ 0.090040][ T1] MPTCP token hash table entries: 8192 (order: 6, 196608 bytes, linear)
  515. [ 0.090128][ T1] UDP hash table entries: 4096 (order: 6, 262144 bytes, linear)
  516. [ 0.090379][ T1] UDP-Lite hash table entries: 4096 (order: 6, 262144 bytes, linear)
  517. [ 0.090681][ T1] NET: Registered PF_UNIX/PF_LOCAL protocol family
  518. [ 0.090961][ T1] RPC: Registered named UNIX socket transport module.
  519. [ 0.090972][ T1] RPC: Registered udp transport module.
  520. [ 0.090977][ T1] RPC: Registered tcp transport module.
  521. [ 0.090982][ T1] RPC: Registered tcp-with-tls transport module.
  522. [ 0.090987][ T1] RPC: Registered tcp NFSv4.1 backchannel transport module.
  523. [ 0.091364][ T1] sunxi_usb_udc 4100000.udc-controller: sunxi:sunxi_usb_udc UDC Inner DMA Feature - wordaddr: 1, extend: enabled
  524. [ 0.091623][ T1] PCI: CLS 0 bytes, default 64
  525. [ 0.091838][ T81] Trying to unpack rootfs image as initramfs...
  526. [ 0.091965][ T1] kvm [1]: HYP mode not available
  527. [ 0.092423][ T1] Initialise system trusted keyrings
  528. [ 0.092538][ T1] workingset: timestamp_bits=42 max_order=21 bucket_order=0
  529. [ 0.092834][ T1] NFS: Registering the id_resolver key type
  530. [ 0.092853][ T1] Key type id_resolver registered
  531. [ 0.092859][ T1] Key type id_legacy registered
  532. [ 0.092870][ T1] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  533. [ 0.092877][ T1] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
  534. [ 0.092908][ T1] 9p: Installing v9fs 9p2000 file system support
  535. [ 0.124272][ T1] Key type asymmetric registered
  536. [ 0.124295][ T1] Asymmetric key parser 'x509' registered
  537. [ 0.124346][ T1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
  538. [ 0.124468][ T1] io scheduler mq-deadline registered
  539. [ 0.124477][ T1] io scheduler kyber registered
  540. [ 0.803483][ T81] Freeing initrd memory: 23184K
  541. [ 0.807295][ T1] ledtrig-cpu: registered to indicate activity on CPUs
  542. [ 0.809564][ T1] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  543. [ 0.810604][ T1] printk: legacy console [ttyS0] disabled
  544. [ 0.830961][ T1] 2500000.serial: ttyS0 at MMIO 0x2500000 (irq = 427, base_baud = 1500000) is a 16550A
  545. [ 0.831005][ T1] printk: legacy console [ttyS0] enabled
  546. [ 2.966652][ T1] brd: module loaded
  547. [ 2.973105][ T1] loop: module loaded
  548. [ 2.977492][ T1] megasas: 07.734.00.00-rc1
  549. [ 2.983432][ T1] thunder_xcv, ver 1.0
  550. [ 2.987381][ T1] thunder_bgx, ver 1.0
  551. [ 2.991318][ T1] nicpf, ver 1.0
  552. [ 2.994943][ T1] igbvf: Intel(R) Gigabit Virtual Function Network Driver
  553. [ 3.001903][ T1] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
  554. [ 3.008526][ T1] sky2: driver version 1.30
  555. [ 3.013186][ T1] VFIO - User Level meta-driver version: 0.3
  556. [ 3.020354][ T1] i2c_dev: i2c /dev entries driver
  557. [ 3.025990][ T1] sunxi:axp2101-0-0036:[INFO]: AXP20x variant AXP8191 found
  558. [ 3.070316][ T1] platform axp2101-pek.0: DMA mask not set
  559. [ 3.076113][ T1] axp8191-temp-ctrl: Failed to locate of_node [id: 0]
  560. [ 3.082805][ T1] sunxi:axp2101-0-0036:[INFO]: AXP20X driver loaded
  561. [ 3.091389][ T1] platform 7023017.s_pwm0: supply pwm not found, using dummy regulator
  562. [ 3.099573][ T1] sunxi:pin-7025000.pinctrl:[INFO]: Auto power withstand voltage configuration detected, automatically exit!
  563. [ 3.112128][ T1] sdhci: Secure Digital Host Controller Interface driver
  564. [ 3.119024][ T1] sdhci: Copyright(c) Pierre Ossman
  565. [ 3.124157][ T1] Synopsys Designware Multimedia Card Interface Driver
  566. [ 3.130910][ T1] sdhci-pltfm: SDHCI platform and OF driver helper
  567. [ 3.137521][ T1] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
  568. [ 3.144779][ T1] usbcore: registered new interface driver usbhid
  569. [ 3.151044][ T1] usbhid: USB HID core driver
  570. [ 3.156214][ T1] hw perfevents: enabled with armv8_cortex_a55 PMU driver, 7 (0,8000003f) counters available
  571. [ 3.166720][ T1] hw perfevents: enabled with armv8_cortex_a76 PMU driver, 7 (0,8000003f) counters available
  572. [ 3.177658][ T1] NET: Registered PF_PACKET protocol family
  573. [ 3.183780][ T1] 9pnet: Installing 9P2000 support
  574. [ 3.188772][ T1] Key type dns_resolver registered
  575. [ 3.193824][ T1] sunxi:ccu_ddr:[INFO]: dram_clk:2400
  576. [ 3.199055][ T1] sunxi:ccu_ddr:[INFO]: dram_div:0x170b0703
  577. [ 3.205423][ T1] NSI_PMU 2020000.nsi-controller: Get support-ecc failed
  578. [ 3.212854][ T1] sunxi-wdt 2050000.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
  579. [ 3.221927][ T1] sunxi:sunxi_mmc_host-4020000.sdmmc:[INFO]: SD/MMC/SDIO Host Controller Driver(v5.59 2025-01-21 15:50 -- v5.66 2025-04-02 16:14)
  580. [ 3.235398][ T1] sunxi:sunxi_mmc_host-4020000.sdmmc:[INFO]: ctl-spec-caps 428
  581. [ 3.244941][ T1] sunxi:sunxi_mmc_host-4020000.sdmmc:[INFO]: No vqmmc regulator found
  582. [ 3.252948][ T1] sunxi:sunxi_mmc_host-4020000.sdmmc:[INFO]: No vdmmc regulator found
  583. [ 3.261429][ T1] sunxi-mmc 4020000.sdmmc: Got CD GPIO
  584. [ 3.266777][ T1] sunxi-mmc 4020000.sdmmc: sunxi:sunxi_mmc_hostcd-set-debounce is 0x1
  585. [ 3.275435][ T1] sunxi:sunxi_mmc_host-4020000.sdmmc:[INFO]: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
  586. [ 3.287625][ T1] sunxi:sunxi_mmc_host-4020000.sdmmc:[INFO]: no vqmmc,Check if there is regulator
  587. [ 3.309177][ T1] sunxi:sunxi_mmc_host-4020000.sdmmc:[INFO]: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  588. [ 3.334738][ T1] sunxi:sunxi_mmc_host-4020000.sdmmc:[INFO]: detmode:gpio irq
  589. [ 3.342332][ T1] sunxi:sunxi_mmc_host-4023000.sdmmc:[INFO]: SD/MMC/SDIO Host Controller Driver(v5.59 2025-01-21 15:50 -- v5.66 2025-04-02 16:14)
  590. [ 3.355807][ T1] sunxi:sunxi_mmc_host-4023000.sdmmc:[INFO]: ctl-spec-caps 328
  591. [ 3.363259][ T1] sunxi:sunxi_mmc_host-4023000.sdmmc:[INFO]: No vmmc regulator found
  592. [ 3.371172][ T1] sunxi:sunxi_mmc_host-4023000.sdmmc:[INFO]: No vqmmc regulator found
  593. [ 3.379169][ T1] sunxi:sunxi_mmc_host-4023000.sdmmc:[INFO]: No vdmmc regulator found
  594. [ 3.387166][ T1] sunxi:sunxi_mmc_host-4023000.sdmmc:[INFO]: No vd33sw regulator found
  595. [ 3.395250][ T1] sunxi:sunxi_mmc_host-4023000.sdmmc:[INFO]: No vd18sw regulator found
  596. [ 3.403333][ T1] sunxi:sunxi_mmc_host-4023000.sdmmc:[INFO]: No vq33sw regulator found
  597. [ 3.411416][ T1] sunxi:sunxi_mmc_host-4023000.sdmmc:[INFO]: No vq18sw regulator found
  598. [ 3.419499][ T1] sunxi:sunxi_mmc_host-4023000.sdmmc:[ERR]: manual set ocr
  599. [ 3.426547][ T1] sunxi:sunxi_mmc_host-4023000.sdmmc:[WARN]: Cann't get uart0 pinstate,check if needed
  600. [ 3.436019][ T1] sunxi:sunxi_mmc_host-4023000.sdmmc:[WARN]: Cann't get pin bias hs pinstate,check if needed
  601. [ 3.446052][ T1] sunxi:sunxi_mmc_host-4023000.sdmmc:[ERR]: Could not get store clock
  602. [ 3.454860][ T1] sunxi:sunxi_mmc_host-4023000.sdmmc:[INFO]: detmode:alway in(non removable)
  603. [ 3.463491][ T79] sunxi:sunxi_mmc_host-4023000.sdmmc:[INFO]: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
  604. [ 3.464311][ T1] [drm] [TCON_TOP]sunxi_tcon_top_probe start
  605. [ 3.476914][ T79] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
  606. [ 3.481663][ T1] [drm] [TCON_TOP]sunxi_tcon_top_probe start
  607. [ 3.491004][ T79] Mem abort info:
  608. [ 3.491006][ T79] ESR = 0x0000000086000004
  609. [ 3.491008][ T79] EC = 0x21: IABT (current EL), IL = 32 bits
  610. [ 3.491455][ T1] [drm] [TCON] sunxi_tcon_probe start
  611. [ 3.496840][ T79] SET = 0, FnV = 0
  612. [ 3.496843][ T79] EA = 0, S1PTW = 0
  613. [ 3.496845][ T79] FSC = 0x04: level 0 translation fault
  614. [ 3.496913][ T1] [drm] [SUNXI-TCON] sunxi_tcon_of_get_id 4
  615. [ 3.500343][ T79] [0000000000000000] user address but active_mm is swapper
  616. [ 3.504914][ T1] [drm] [TCON] sunxi_tcon_probe ret = 0
  617. [ 3.510779][ T79] Internal error: Oops: 0000000086000004 [#1] SMP
  618. [ 3.510896][ T1] [drm] [TCON] sunxi_tcon_probe start
  619. [ 3.516002][ T79] Modules linked in:
  620. [ 3.516008][ T79] CPU: 6 UID: 0 PID: 79 Comm: kworker/6:1 Not tainted 6.18.19-edge-sun60iw2 #4 PREEMPT
  621. [ 3.519767][ T1] [drm] [SUNXI-TCON] sunxi_tcon_of_get_id 5
  622. [ 3.523583][ T79] Hardware name: sun60iw2 (DT)
  623. [ 3.523586][ T79] Workqueue: events_freezable mmc_rescan
  624. [ 3.529253][ T1] [drm] [TCON] sunxi_tcon_probe ret = 0
  625. [ 3.534886][ T79]
  626. [ 3.534889][ T79] pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
  627. [ 3.535029][ T1] [drm] sunxi_drm_platform_probe start
  628. [ 3.539176][ T10] sunxi:sunxi_mmc_host-4020000.sdmmc:[INFO]: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
  629. [ 3.541931][ T79] pc : 0x0
  630. [ 3.541935][ T79] lr : sd_uhs2_power_up+0x5c/0x74
  631. [ 3.541943][ T1] [drm] sunxi_drm_match_add start
  632. [ 3.541948][ T79] sp : ffff8000823abd20
  633. [ 3.542313][ T1] [drm] sunxi_drm_match_add finish
  634. [ 3.547342][ T79] x29: ffff8000823abd20 x28: 0000000000000000 x27: 0000000000000000
  635. [ 3.547348][ T79] x26: 0000000000000000
  636. [ 3.548491][ T1] phy[combophy0]: lane_invert[0 0 0 0] lane_remap[0 1 2 3] typec_remap[0 1 2 3]
  637. [ 3.553695][ T79] x25: 00000000fffffef7 x24: ffff0000c0033005
  638. [ 3.553700][ T79] x23: ffff8000810b8f38 x22: ffff8000810b8ea8 x21: 0000000000000000
  639. [ 3.553705][ T79] x20: ffff0000c1a47448
  640. [ 3.553802][ T1] phy[combophy1]: lane_invert[0 0 0 0] lane_remap[0 1 2 3] typec_remap[0 1 2 3]
  641. [ 3.558927][ T79] x19: ffff0000c1a47000 x18: 00000000ffffffff
  642. [ 3.558931][ T79] x17: 62207a4830206b6c x16: 633a736f69207465
  643. [ 3.558960][ T1] Maybe there is no phy reg for aux_hpd
  644. [ 3.562681][ T79] x15: 7320636473203a5d
  645. [ 3.562684][ T79] x14: 0000000000000000 x13: 205d393754202020
  646. [ 3.562723][ T1] phy[aux_hpd]: lane_invert[0 0 0 0] lane_remap[0 1 2 3] typec_remap[0 1 2 3]
  647. [ 3.572239][ T79] x12: 071c71c71c71c71c
  648. [ 3.572242][ T79] x11: 00000000000000c0 x10: 0000000000000aa0
  649. [ 3.573205][ T1] sunxi-cadence-combophy 6c00000.serdes: Sub System Version v2.0.0
  650. [ 3.577976][ T79] x9 : ffff8000823abbc0
  651. [ 3.577979][ T79] x8 : ffff0000c096ae00 x7 : 0000000003197500 x6 : 0000000000000002
  652. [ 3.577984][ T79] x5 : 000000000000000d
  653. [ 3.578183][ T1] sunxi:phy_sunxi_plat-6b00000.phy:[INFO]: resistance calibration supported - enabled, mode - V2
  654. [ 3.582600][ T79] x4 : ffff8000817f6290 x3 : 0000000000000015
  655. [ 3.582604][ T79] x2 : 0000000000000000 x1 : 0000000000000007 x0 : ffff0000c1a47000
  656. [ 3.582661][ T1] sunxi:phy_sunxi_plat-6b00000.phy:[INFO]: phy provider register success
  657. [ 3.588090][ T79]
  658. [ 3.588091][ T79] Call trace:
  659. [ 3.588093][ T79] 0x0 (P)
  660. [ 3.588097][ T79] mmc_attach_sd_uhs2+0x48/0x168
  661. [ 3.594203][ T1] sunxi-cadence-combophy 6c00000.serdes: combophy0 set power ON
  662. [ 3.595677][ T79] mmc_rescan+0x128/0x324
  663. [ 3.595683][ T79] process_one_work+0x148/0x284
  664. [ 3.595692][ T79] worker_thread+0x180/0x2f4
  665. [ 3.603336][ T1] ==================== orientation: UNKNOW USB configured: yes ====================
  666. [ 3.608633][ T79] kthread+0x12c/0x1f0
  667. [ 3.659186][ T1] mode: 1, submode: 0, orientation: UNKNOW, state: STATE_SAFE
  668. [ 3.663028][ T79] ret_from_fork+0x10/0x20
  669. [ 3.663039][ T79] ---[ end trace 0000000000000000 ]---
  670. [ 3.669261][ T1] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  671. [ 3.676846][ T79] Kernel panic - not syncing: Oops: Fatal exception
  672. [ 3.676849][ T79] SMP: stopping secondary CPUs
  673. [ 3.676904][ T79] Kernel Offset: disabled
  674. [ 3.676905][ T79] CPU features: 0x1c0000,0000e000,40046281,0400720b
  675. [ 3.676908][ T79] Memory Limit: none
  676. [ 3.886958][ T79] ---[ end Kernel panic - not syncing: Oops: Fatal exception ]---
Advertisement
Comments
  • User was banned
  • User was banned
  • User was banned
  • User was banned
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!