Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- BI: logical eraseblock size: 129024 bytes
- [ 2.800628] UBI: smallest flash I/O unit: 2048
- [ 2.800659] UBI: sub-page size: 512
- [ 2.800689] UBI: VID header offset: 512 (aligned 512)
- [ 2.800720] UBI: data offset: 2048
- [ 2.933441] UBI: attached mtd5 to ubi0
- [ 2.933502] UBI: MTD device name: "rootfs"
- [ 2.933532] UBI: MTD device size: 251 MiB
- [ 2.933563] UBI: number of good PEBs: 2009
- [ 2.933593] UBI: number of bad PEBs: 1
- [ 2.933624] UBI: max. allowed volumes: 128
- [ 2.933654] UBI: wear-leveling threshold: 4096
- [ 2.933685] UBI: number of internal volumes: 1
- [ 2.933715] UBI: number of user volumes: 1
- [ 2.933746] UBI: available PEBs: 0
- [ 2.933776] UBI: total number of reserved PEBs: 2009
- [ 2.933807] UBI: number of PEBs reserved for bad PEB handling: 20
- [ 2.933837] UBI: max/mean erase counter: 155/38
- [ 2.933868] UBI: image sequence number: 2
- [ 2.934295] usbcore: registered new interface driver libusual
- [ 2.934387] UBI: background thread "ubi_bgt0d" started, PID 26
- [ 2.957122] input: omap_twl4030keypad as /class/input/input1
- [ 3.005737] cpuidle: using governor ladder
- [ 3.005798] cpuidle: using governor menu
- [ 3.005981] Advanced Linux Sound Architecture Driver Version 1.0.18rc3.
- [ 3.006256] ASoC version 0.13.2
- [ 3.019775] AIC3X Audio Codec 0.2
- [ 3.022338] asoc: tlv320aic3x <-> omap-mcbsp-dai-0 mapping ok
- [ 3.023834] asoc: Bluetooth codec <-> omap-mcbsp-dai-1 mapping ok
- [ 3.075500] input: RX51 (tlv320aic3x) Jack as /class/input/input2
- [ 3.099761] ALSA device list:
- [ 3.099822] #0: RX51 (tlv320aic3x)
- [ 3.100036] TCP cubic registered
- [ 3.100097] Initializing XFRM netlink socket
- [ 3.100158] NET: Registered protocol family 17
- [ 3.100219] NET: Registered protocol family 15
- [ 3.100280] ThumbEE CPU extension supported.
- [ 3.100311] Power Management for TI OMAP3.
- [ 3.103698] pm_dbg_init()
- [ 3.104492] SmartReflex driver initialized
- [ 3.110717] Disabling unused clock "gpt2_ick"
- [ 3.110809] Disabling unused clock "gpt3_ick"
- [ 3.110839] Disabling unused clock "gpt4_ick"
- [ 3.110870] Disabling unused clock "gpt5_ick"
- [ 3.110900] Disabling unused clock "gpt6_ick"
- [ 3.110931] Disabling unused clock "gpt7_ick"
- [ 3.110992] Disabling unused clock "gpt8_ick"
- [ 3.111022] Disabling unused clock "gpt9_ick"
- [ 3.111053] Disabling unused clock "uart3_ick"
- [ 3.111083] Disabling unused clock "gpio2_dbck"
- [ 3.111114] Disabling unused clock "gpio3_dbck"
- [ 3.111145] Disabling unused clock "gpio4_dbck"
- [ 3.111206] Disabling unused clock "gpio5_dbck"
- [ 3.111236] Disabling unused clock "gpio6_dbck"
- [ 3.111267] Disabling unused clock "gpt9_fck"
- [ 3.111297] Disabling unused clock "gpt8_fck"
- [ 3.111328] Disabling unused clock "gpt7_fck"
- [ 3.111358] Disabling unused clock "gpt6_fck"
- [ 3.111389] Disabling unused clock "gpt5_fck"
- [ 3.111450] Disabling unused clock "gpt4_fck"
- [ 3.111480] Disabling unused clock "gpt3_fck"
- [ 3.111511] Disabling unused clock "gpt2_fck"
- [ 3.111541] Disabling unused clock "uart3_fck"
- [ 3.111572] Disabling unused clock "wdt2_ick"
- [ 3.111602] Disabling unused clock "wdt2_fck"
- [ 3.111663] Disabling unused clock "gpio1_dbck"
- [ 3.111694] Disabling unused clock "rng_ick"
- [ 3.111724] Disabling unused clock "ssi_ick"
- [ 3.111785] Disabling unused clock "gpt10_ick"
- [ 3.111816] Disabling unused clock "gpt11_ick"
- [ 3.111846] Disabling unused clock "uart1_ick"
- [ 3.111877] Disabling unused clock "uart2_ick"
- [ 3.111907] Disabling unused clock "usbtll_ick"
- [ 3.111968] Disabling unused clock "ssi_ssr_fck"
- [ 3.111999] Disabling unused clock "uart1_fck"
- [ 3.112030] Disabling unused clock "uart2_fck"
- [ 3.112091] Disabling unused clock "usbtll_fck"
- [ 3.112152] Disabling unused clock "ts_fck"
- [ 3.112182] Disabling unused clock "cpefuse_fck"
- [ 3.112213] Disabling unused clock "gpt11_fck"
- [ 3.112243] Disabling unused clock "gpt10_fck"
- [ 3.112274] Disabling unused clock "dpll5_ck"
- [ 3.112365] Disabling unused clock "dpll4_m6x2_ck"
- [ 3.112396] Disabling unused clock "dpll4_m5x2_ck"
- [ 3.112426] Disabling unused clock "dpll3_m3x2_ck"
- [ 3.112457] Disabling unused clock "sys_clkout1"
- [ 3.112945] Bootup reason: pwr_key
- [ 3.113037] OMAP GPIO switch handler initializing
- [ 3.115600] slide (GPIO 71) is now closed
- [ 3.115631] proximity (GPIO 89) is now open
- [ 3.115661] kb_lock (GPIO 113) is now open
- [ 3.115692] headphone (GPIO 177) is now disconnected
- [ 3.115722] cam_shutter (GPIO 110) is now closed
- [ 3.115783] cam_launch (GPIO 69) is now inactive
- [ 3.115814] cam_focus (GPIO 68) is now inactive
- [ 3.115844] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
- [ 3.116455] registered taskstats version 1
- [ 3.136505] omapfb: acx565akm rev 8d LCD detected
- [ 3.174316] tpa6130a2 2-0060: Headphone amplifier initialized successfully
- [ 3.194763] UBIFS: recovery needed
- [ 3.235260] UBIFS: recovery completed
- [ 3.235321] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
- [ 3.235382] UBIFS: file system size: 254693376 bytes (248724 KiB, 242 MiB, 1974 LEBs)
- [ 3.235443] UBIFS: journal size: 9033728 bytes (8822 KiB, 8 MiB, 71 LEBs)
- [ 3.235473] UBIFS: media format: 4 (latest is 4)
- [ 3.235504] UBIFS: default compressor: lzo
- [ 3.235534] UBIFS: reserved for root: 4384586 bytes (4281 KiB)
- [ 3.236022] VFS: Mounted root (ubifs filesystem).
- [ 3.236206] Freeing init memory: 144K
- [ 5.508850] tsl2563 2-0029: model 7, rev. 0
- [ 5.661407] lp5523 2-0032: LP5523 Programmable led chip found
- [ 5.696380] Registered led device: twl4030:vibrator
- [ 5.734375] Linux video capture interface: v2.00
- [ 5.791351] twl4030_rtc twl4030_rtc: rtc core: registered twl4030_rtc as rtc0
- [ 5.839141] I2C driver for Si4713 FM Radio Transmitter
- [ 6.066101] isp_mod: disagrees about version of symbol struct_module
- [ 6.265197] isp_mod: Unknown symbol iommu_restore_ctx
- [ 6.265625] isp_mod: Unknown symbol iommu_vfree
- [ 6.266357] isp_mod: Unknown symbol iommu_put
- [ 6.266845] isp_mod: Unknown symbol iommu_save_ctx
- [ 6.267272] isp_mod: Unknown symbol iommu_vunmap
- [ 6.267761] isp_mod: Unknown symbol iommu_vmalloc
- [ 6.292724] isp_mod: Unknown symbol iommu_get
- [ 6.293640] isp_mod: Unknown symbol iommu_kmap
- [ 6.294158] isp_mod: Unknown symbol da_to_va
- [ 6.294738] isp_mod: Unknown symbol iommu_vmap
- [ 6.295074] isp_mod: Unknown symbol iommu_kunmap
- [ 6.295471] isp_mod: Unknown symbol videobuf_to_dma
- [ 6.659790] i2c_omap i2c_omap.2: controller timed out
- [ 6.671203] Bluetooth: Core ver 2.15
- [ 6.716461] lp5523 2-0032: got interrupt from led chip
- [ 6.717010] lp5523 2-0032: interrupt from led chip 4f
- [ 6.717041] lp5523 2-0032: all engines configured
- [ 6.717071] lp5523 2-0032: disabling engines
- [ 6.717681] Registered led device: lp5523:kb1
- [ 6.717834] Registered led device: lp5523:kb2
- [ 6.717987] Registered led device: lp5523:kb3
- [ 6.718139] Registered led device: lp5523:kb4
- [ 6.718261] Registered led device: lp5523:b
- [ 6.718414] Registered led device: lp5523:g
- [ 6.718566] Registered led device: lp5523:r
- [ 6.718688] Registered led device: lp5523:kb5
- [ 6.718811] Registered led device: lp5523:kb6
- [ 6.809509] radio-si4713 2-0063: Detected Si4713 (0x0d) Firmware: 3.0 Patch ID: 00:00 Component: 3.0 Chip Rev.: unknown
- [ 6.847351] NET: Registered protocol family 31
- [ 6.847412] Bluetooth: HCI device and connection manager initialized
- [ 6.847442] Bluetooth: HCI socket layer initialized
- [ 6.916961] TSC2005 driver initializing
- [ 6.917694] input: TSC2005 touchscreen as /class/input/input3
- [ 7.017700] hci_h4p hci_h4p: Registering HCI H4P device
- [ 7.268493] SSI DRIVER Version 1.1-rc2
- [ 7.309082] nokia-av nokia-av: accessory detect module initialized
- [ 7.309997] omap_wdt omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec, nowayout is on
- [ 7.310333] omap_ssi omap_ssi: SSI Hardware REVISION 1.0
- [ 7.464233] smc91x: not found (-19).
- [ 7.731445] mmci-omap-hs mmci-omap-hs.0: Failed to get debounce clock
- [ 7.773864] CMT speech driver v0.2.0
- [ 7.785552] phy0: Selected rate control algorithm 'minstrel'
- [ 7.847839] mmci-omap-hs mmci-omap-hs.1: Failed to get debounce clock
- [ 8.059051] wl1251: loaded
- [ 8.059783] wl1251: initialized
- [ 8.062164] NET: Registered protocol family 35
- [ 8.080902] SSI McSAAB PROTOCOL Version: 2.0-rc1
- [ 8.238006] dspbridge_init: 412800 bytes @ 80600000
- [ 8.292724] mmc1: new high speed MMC card at address 0001
- [ 8.300384] mmcblk0: mmc1:0001 MMC32G 29.8 GiB
- [ 8.300689] mmcblk0: p1 p2 p3
- [ 8.453826] omap-iommu omap-iommu.1: isp registered
- [ 8.703704] isp_mod: disagrees about version of symbol struct_module
- [ 8.781250] omap-iommu omap-iommu.1: isp: version 1.1
- [ 8.983367] smia-sensor 2-0010: firmware: requesting smia-sensor-01-022b-04.bin
- [ 9.003326] smia_reglist_import: meta_reglist version 2009-07-27
- [ 9.003479] smia_reglist_import: type 10 w 648 h 488 fmt 30314142 ival 100/1502 ptr d0d322a0
- [ 9.003509] smia_reglist_import: type 10 w 648 h 488 fmt 30314142 ival 100/3003 ptr d0d32228
- [ 9.003540] smia_reglist_import: type 1 w 0 h 0 fmt 30314142 ival 100/0 ptr d0d32090
- [ 9.003540] smia_reglist_import: type 0 w 0 h 0 fmt 30314142 ival 100/0 ptr d0d32038
- [ 9.020538] et8ek8 3-003e: firmware: requesting et8ek8-0002.bin
- [ 9.039520] smia_reglist_import: meta_reglist version V14 03-June-2008
- [ 9.039611] smia_reglist_import: type 10 w 2592 h 1968 fmt 30314442 ival 100/1292 ptr d0d351f4
- [ 9.039642] smia_reglist_import: type 10 w 2592 h 1968 fmt 30314142 ival 100/399 ptr d0d35454
- [ 9.039642] smia_reglist_import: type 10 w 1296 h 984 fmt 30314142 ival 100/501 ptr d0d3557c
- [ 9.039672] smia_reglist_import: type 10 w 1296 h 984 fmt 30314442 ival 100/2500 ptr d0d35614
- [ 9.039672] smia_reglist_import: type 10 w 1296 h 984 fmt 30314442 ival 100/3000 ptr d0d3528c
- [ 9.039703] smia_reglist_import: type 10 w 864 h 656 fmt 30314142 ival 100/2988 ptr d0d35324
- [ 9.039733] smia_reglist_import: type 10 w 648 h 492 fmt 30314142 ival 100/499 ptr d0d354e4
- [ 9.039733] smia_reglist_import: type 10 w 648 h 492 fmt 30314142 ival 100/2993 ptr d0d353bc
- [ 9.039764] smia_reglist_import: type 1 w 2592 h 1968 fmt 30314142 ival 100/1207 ptr d0d3504c
- [ 9.722259] g_file_storage gadget: File-backed Storage Gadget, version: 7 August 2007
- [ 9.722351] g_file_storage gadget: Number of LUNs=2 Number of buffers=16
- [ 9.722381] musb_hdrc musb_hdrc: MUSB HDRC host driver
- [ 9.724334] /home/builder2/maemo-fremantle-armel-extras-devel/work/kernel-power-2.6.28/drivers/usb/core/inode.c: creating file 'devices'
- [ 9.724395] /home/builder2/maemo-fremantle-armel-extras-devel/work/kernel-power-2.6.28/drivers/usb/core/inode.c: creating file '001'
- [ 9.726318] musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 1
- [ 9.726470] usb usb1: default language 0x0409
- [ 9.726837] usb usb1: uevent
- [ 9.728546] usb usb1: usb_probe_device
- [ 9.728546] usb usb1: configuration #1 chosen from 1 choice
- [ 9.728637] usb usb1: adding 1-0:1.0 (config #1, interface 0)
- [ 9.728790] usb 1-0:1.0: uevent
- [ 9.729919] hub 1-0:1.0: usb_probe_interface
- [ 9.730041] hub 1-0:1.0: usb_probe_interface - got id
- [ 9.730041] hub 1-0:1.0: USB hub found
- [ 9.730194] hub 1-0:1.0: 1 port detected
- [ 9.730224] hub 1-0:1.0: standalone hub
- [ 9.730224] hub 1-0:1.0: individual port power switching
- [ 9.730224] hub 1-0:1.0: no over-current protection
- [ 9.730255] hub 1-0:1.0: power on to power good time: 10ms
- [ 9.730285] hub 1-0:1.0: local power source is good
- [ 9.730285] hub 1-0:1.0: enabling power on all ports
- [ 9.733215] /home/builder2/maemo-fremantle-armel-extras-devel/work/kernel-power-2.6.28/drivers/usb/core/inode.c: creating file '001'
- [ 9.734436] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 9.734497] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 9.734527] usb usb1: Product: MUSB HDRC host driver
- [ 9.734558] usb usb1: Manufacturer: Linux 2.6.28.10power46 musb-hcd
- [ 9.734588] usb usb1: SerialNumber: musb_hdrc
- [ 9.817962] twl4030_usb twl4030_usb: HW_CONDITIONS 0xd0/208; link 2
- [ 9.831665] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
- [ 9.920166] twl4030_usb twl4030_usb: HW_CONDITIONS 0x50/80; link 1
- [ 10.320983] NET: Registered protocol family 10
- [ 10.321716] lo: Disabled Privacy Extensions
- [ 10.322235] ADDRCONF(NETDEV_UP): phonet0: link is not ready
- [ 12.206634] hub 1-0:1.0: hub_suspend
- [ 12.206695] usb usb1: bus auto-suspend
- [ 12.274078] Adding 786424k swap on /dev/mmcblk0p3. Priority:-1 extents:1 across:786424k
- [ 13.421142] kjournald starting. Commit interval 1 seconds
- [ 13.432128] EXT3 FS on mmcblk0p2, internal journal
- [ 13.432220] EXT3-fs: mounted filesystem with writeback data mode.
- [ 17.931671] McSAAB: ACWAKE DOWN
- [ 17.931732] McSAAB: ACWAKE UP
- [ 17.931762] McSAAB: WAKELINES TEST OK
- [ 17.932128] ADDRCONF(NETDEV_CHANGE): phonet0: link becomes ready
- [ 18.225158] Bluetooth: L2CAP ver 2.13
- [ 18.225189] Bluetooth: L2CAP socket layer initialized
- [ 18.433654] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 18.433685] Bluetooth: BNEP filters: protocol multicast
- [ 18.863464] Bluetooth: SCO (Voice Link) ver 0.6
- [ 18.863494] Bluetooth: SCO socket layer initialized
- [ 18.912841] hci_h4p hci_h4p: firmware: requesting bcmfw.bin
- [ 19.708862] Bluetooth: RFCOMM socket layer initialized
- [ 19.708923] Bluetooth: RFCOMM TTY layer initialized
- [ 19.708923] Bluetooth: RFCOMM ver 1.11
- [ 22.667785] misc iphb: Module registered in 2.6.28.10power46, built Nov 18 2010 17:06:26
- [ 45.056518] cfg80211: Regulatory domain changed to country: US
- [ 45.056549] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 45.056579] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
- [ 45.056579] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
- [ 45.056610] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
- [ 45.056610] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
- [ 45.056640] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
- [ 45.056640] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
- [ 46.199188] wl12xx spi4.0: firmware: requesting wl1251-fw.bin
- [ 48.519287] wl1251: 151 tx blocks at 0x3b788, 35 rx blocks at 0x3a780
- [ 48.535705] wl1251: firmware booted (Rev 4.0.4.3.7)
- [ 48.683685] ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 48.739288] SCSI subsystem initialized
- [ 49.172332] Driver 'sd' needs updating - please use bus_type methods
- [ 50.520355] wl1251: down
- [ 51.081817] wl1251: 151 tx blocks at 0x3b788, 35 rx blocks at 0x3a780
- [ 51.097442] wl1251: firmware booted (Rev 4.0.4.3.7)
- [ 51.222808] ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 52.136474] wlan0: authenticate with AP 00:23:5e:1f:c7:03
- [ 52.138977] wlan0: authenticated
- [ 52.139007] wlan0: associate with AP 00:23:5e:1f:c7:03
- [ 52.142242] wlan0: RX AssocResp from 00:23:5e:1f:c7:03 (capab=0x421 status=0 aid=33)
- [ 52.142272] wlan0: associated
- [ 52.207885] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ 62.292663] wlan0: no IPv6 routers present
- [ 73.652221] slide (GPIO 71) is now open
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement