Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- archl-xu4m login: root
- Password:
- Last login: Fri Jun 28 10:39:05 on ttySAC2
- [root@archl-xu4m ~]# re
- -bash: re: command not found
- [root@archl-xu4m ~]# reboot
- [ OK ] Stopped target Graphical Interface.
- Starting Generate shutdown-ramfs...
- [ OK ] Stopped targe Stopping Session c1 of user root.
- [ OK ] Stopped Daily Cleanup of Temporary Directories.
- [ OK ] Stopped Daily verification of password and group files.
- [ OK ] Stopped target Multi-User System.
- [ OK ] Stopped Daily man-db regeneration.
- [ OK ] Stopped target System Time Synchronized.
- [ OK ] Stopped target System Time Set.
- [ OK ] Stopped target Login Prompts.
- Stopping OpenSSH Daemon...
- [ OK ] Stopped Apply cpupower configuration.
- Stopping Serial Getty on ttySAC2...
- [ OK ] Stopped target Host and Network Name Lookups.
- Stopping Getty on tty1...
- [ OK ] Stopped OpenSSH Daemon.
- [ OK ] Stopped Getty on tty1.
- [ OK ] Stopped Serial Getty on ttySAC2.
- [ OK ] Stopped Session c1 of user root.
- Stopping User Manager for UID 0...
- Stopping Login Service...
- [ OK ] Removed slice system-serial\x2dgetty.slice.
- [ OK ] Removed slice system-getty.slice.
- [ OK ] Stopped User Manager for UID 0.
- Stopping User Runtime Directory /run/user/0...
- [ OK ] Unmounted /run/user/0.
- [ OK ] Stopped User Runtime Directory /run/user/0.
- Stopping D-Bus System Message Bus...
- [ OK ] Removed slice User Slice of UID 0.
- Stopping Permit User Sessions...
- [ OK ] Stopped D-Bus System Message Bus.
- [ OK ] Stopped Login Service.
- [ OK ] Stopped Permit User Sessions.
- [ OK ] Stopped target Remote File Systems.
- [ OK ] Stopped target Network.
- Stopping Network Name Resolution...
- [ OK ] Stopped target Basic System.
- [ OK ] Stopped target Paths.
- [ OK ] Stopped target Slices.
- [ OK ] Removed slice User and Session Slice.
- [ OK ] Stopped target Sockets.
- [ OK ] Closed D-Bus System Message Bus Socket.
- [ OK ] Stopped target System Initialization.
- [ OK ] Stopped target Local Encrypted Volumes.
- [ OK ] Stopped Forward Password R?uests to Wall Directory Watch.
- [ OK ] Stopped Dispatch Password ?ts to Console Directory Watch.
- Stopping Entropy Harvesting Daemon...
- Stopping Update UTMP about System Boot/Shutdown...
- Stopping Network Time Synchronization...
- [ OK ] Stopped Network Name Resolution.
- [ OK ] Stopped Network Time Synchronization.
- [ OK ] Stopped Entropy Harvesting Daemon.
- [ OK ] Started Generate shutdown-ramfs.
- Stopping Load/Save Random Seed...
- Stopping Network Service...
- [ OK ] Stopped Update UTMP about System Boot/Shutdown.
- [ OK ] Stopped Load/Save Random Seed.
- [ OK ] Stopped Network Service.
- [ OK ] Stopped Apply Kernel Variables.
- [ OK ] Stopped Create Volatile Files and Directories.
- [ OK ] Stopped target Local File Systems.
- [ OK ] Stopped target Local File Systems (Pre).
- [ OK ] Stopped Create Static Device Nodes in /dev.
- Stopping Monitoring of LVM?meventd or progress polling...
- Unmounting Temporary Directory (/tmp)...
- [ OK ] Stopped Remount Root and Kernel File Systems.
- [ OK ] Unmounted Temporary Directory (/tmp).
- [ OK ] Reached target Unmount All Filesystems.
- [ OK ] Stopped target Swap.
- [ OK ] Stopped Monitoring of LVM2? dmeventd or progress polling.
- Stopping LVM2 metadata daemon...
- [ OK ] Stopped LVM2 metadata daemon.
- [ OK ] Reached target Shutdown.
- [ OK ] Reached target Final Step.
- [ OK ] Started Reboot.
- [ OK ] Reached target Reboot.
- [ OK ] Closed LVM2 metadata daemon socket.
- [ 118.751009] printk: systemd-shutdow: 47 output lines suppressed due to ratelimiting
- [ 118.830653] systemd-shutdown[1]: Syncing filesystems and block devices.
- [ 119.193133] systemd-shutdown[1]: Sending SIGTERM to remaining processes...
- [ 119.223504] systemd-journald[221]: Received SIGTERM from PID 1 (systemd-shutdow).
- [ 119.282201] systemd-shutdown[1]: Sending SIGKILL to remaining processes...
- [ 119.311541] systemd-shutdown[1]: Hardware watchdog 'S3C2410 Watchdog', version 0
- [ 119.323683] systemd-shutdown[1]: Unmounting file systems.
- [ 119.346031] [406]: Remounting '/' read-only in with options '(null)'.
- [ 119.442527] EXT4-fs (mmcblk1p1): re-mounted. Opts: (null)
- [ 119.480248] systemd-shutdown[1]: All filesystems unmounted.
- [ 119.484438] systemd-shutdown[1]: Deactivating swaps.
- [ 119.489461] systemd-shutdown[1]: All swaps deactivated.
- [ 119.494671] systemd-shutdown[1]: Detaching loop devices.
- [ 119.509608] systemd-shutdown[1]: All loop devices detached.
- [ 119.674475] printk: shutdown: 5 output lines suppressed due to ratelimiting
- [ 119.749176] shutdown[1]: Syncing filesystems and block devices.
- [ 119.768803] shutdown[1]: Sending SIGTERM to remaining processes...
- [ 119.802600] shutdown[1]: Sending SIGKILL to remaining processes...
- [ 119.820083] shutdown[1]: Hardware watchdog 'S3C2410 Watchdog', version 0
- [ 119.825395] shutdown[1]: Unmounting file systems.
- [ 119.854797] sd-umoun[411]: Unmounting '/oldroot/sys/kernel/debug'.
- [ 119.885480] sd-umoun[412]: Unmounting '/oldroot/sys/kernel/config'.
- [ 119.904675] sd-umoun[413]: Unmounting '/oldroot/sys/fs/cgroup/systemd'.
- [ 119.927642] sd-umoun[414]: Unmounting '/oldroot/sys/fs/cgroup/unified'.
- [ 119.952807] sd-umoun[415]: Unmounting '/oldroot/sys/fs/cgroup'.
- [ 119.974061] sd-umoun[416]: Unmounting '/oldroot/dev/pts'.
- [ 119.998004] sd-umoun[417]: Unmounting '/oldroot/dev/shm'.
- [ 120.016285] sd-umoun[418]: Unmounting '/oldroot/sys/kernel/security'.
- [ 120.037738] sd-umoun[419]: Unmounting '/oldroot'.
- [ 120.041466] sd-umoun[419]: Failed to unmount /oldroot: Device or resource busy
- [ 120.066940] sd-umoun[420]: Unmounting '/oldroot/run'.
- [ 120.084864] sd-umoun[421]: Unmounting '/oldroot/dev'.
- [ 120.101876] sd-umoun[422]: Unmounting '/oldroot/sys'.
- [ 120.117704] sd-umoun[423]: Unmounting '/oldroot/proc'.
- [ 120.135186] sd-umoun[424]: Unmounting '/oldroot'.
- [ 120.235091] shutdown[1]: All filesystems unmounted.
- [ 120.238554] shutdown[1]: Deactivating swaps.
- [ 120.242966] shutdown[1]: All swaps deactivated.
- [ 120.247294] shutdown[1]: Detaching loop devices.
- [ 120.260813] shutdown[1]: All loop devices detached.
- [ 120.308592] sd 0:0:0:0: [sda] Synchronizing SCSI cache
- [ 120.425890] usb 4-1.1: reset SuperSpeed Gen 1 USB device number 3 using xhci-hcd
- [ 120.500085] wake enabled for irq 155
- [ 120.592335] reboot: Restartin
- U-Boot 2018.01-2 (Feb 15 2018 - 02:09:52 +0000) Arch Linux ARM
- CPU: Exynos5422 @ 800 MHz
- Model: Odroid XU3 based on EXYNOS5422
- Board: Odroid XU3 based on EXYNOS5422
- Type: xu4
- DRAM: 2 GiB
- MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1
- *** Warning - bad CRC, using default environment
- In: serial
- Out: serial
- Err: serial
- Net: No ethernet found.
- Hit any key to stop autoboot: 0
- Card did not respond to voltage select!
- mmc_init: -95, time 11
- switch to partitions #0, OK
- mmc0 is current device
- Scanning mmc 0:1...
- Found U-Boot script /boot/boot.scr
- 2269 bytes read in 22 ms (100.6 KiB/s)
- ## Executing script at 50000000
- 7097632 bytes read in 544 ms (12.4 MiB/s)
- 59066 bytes read in 46 ms (1.2 MiB/s)
- 6557116 bytes read in 512 ms (12.2 MiB/s)
- Kernel image @ 0x42000000 [ 0x000000 - 0x6c4d20 ]
- ## Flattened Device Tree blob at 43000000
- Booting using the fdt blob at 0x43000000
- Loading Ramdisk to 4f9bf000, end 4ffffdbc ... OK
- Loading Device Tree to 4f9ad000, end 4f9be6b9 ... OK
- Starting kernel ...
- [ 0.000000] Booting Linux on physical CPU 0x100
- [ 0.000000] Linux version 5.2.0-rc6-next-20190626-xu4ml (alarm@archl-xu4m) (gcc version 8.3.0 (GCC)) #21 SMP PREEMPT Fri Jun 28 09:21:21 UTC 2019
- [ 0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=10c5387d
- [ 0.000000] CPU: div instructions available: patching division code
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] OF: fdt: Machine model: Hardkernel Odroid XU4
- [ 0.000000] Memory policy: Data cache writealloc
- [ 0.000000] cma: Reserved 96 MiB at 0x6a000000
- [ 0.000000] Samsung CPU ID: 0xe5422001
- [ 0.000000] Running under secure firmware.
- [ 0.000000] percpu: Embedded 21 pages/cpu s54888 r8192 d22936 u86016
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 517120
- [ 0.000000] Kernel command line: console=tty1 console=ttySAC2,115200n8 root=PARTUUID=4571b77a-01 rw rootwait smsc95xx.macaddr= log_buf_len=10M
- [ 0.000000] printk: log_buf_len: 16777216 bytes
- [ 0.000000] printk: early log buf free: 129652(98%)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
- [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
- [ 0.000000] Memory: 1912364K/2074624K available (10240K kernel code, 829K rwdata, 3568K rodata, 1024K init, 6803K bss, 63956K reserved, 98304K cma-reserved, 1288192K highmem)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
- [ 0.000000] Running RCU self tests
- [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
- [ 0.000000] rcu: RCU lockdep checking is enabled.
- [ 0.000000] Tasks RCU enabled.
- [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
- [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
- [ 0.000000] GIC: Using split EOI/Deactivate mode
- [ 0.000000] random: get_random_bytes called from start_kernel+0x374/0x51c with crng_init=0
- [ 0.000000] Switching to timer-based delay loop, resolution 41ns
- [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
- [ 0.000009] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
- [ 0.000081] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 49
- [ 0.001757] Console: colour dummy device 80x30
- [ 0.004766] printk: console [tty1] enabled
- [ 0.004847] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
- [ 0.004969] ... MAX_LOCKDEP_SUBCLASSES: 8
- [ 0.005044] ... MAX_LOCK_DEPTH: 48
- [ 0.005119] ... MAX_LOCKDEP_KEYS: 8192
- [ 0.005197] ... CLASSHASH_SIZE: 4096
- [ 0.005274] ... MAX_LOCKDEP_ENTRIES: 32768
- [ 0.005353] ... MAX_LOCKDEP_CHAINS: 65536
- [ 0.005431] ... CHAINHASH_SIZE: 32768
- [ 0.005509] memory used by lock dependency info: 4413 kB
- [ 0.005600] per task-struct memory footprint: 1536 bytes
- [ 0.005799] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
- [ 0.005965] pid_max: default: 32768 minimum: 301
- [ 0.006505] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
- [ 0.006647] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
- [ 0.009440] *** VALIDATE proc ***
- [ 0.010700] *** VALIDATE cgroup1 ***
- [ 0.010787] *** VALIDATE cgroup2 ***
- [ 0.010873] CPU: Testing write buffer coherency: ok
- [ 0.013222] CPU0: thread -1, cpu 0, socket 1, mpidr 80000100
- [ 0.070149] Setting up static identity map for 0x40100000 - 0x40100060
- [ 0.071211] ARM CCI driver probed
- [ 0.071650] Exynos MCPM support installed
- [ 0.090004] rcu: Hierarchical SRCU implementation.
- [ 0.140015] smp: Bringing up secondary CPUs ...
- [ 0.220603] CPU1: thread -1, cpu 1, socket 1, mpidr 80000101
- [ 0.300463] CPU2: thread -1, cpu 2, socket 1, mpidr 80000102
- [ 0.380505] CPU3: thread -1, cpu 3, socket 1, mpidr 80000103
- [ 0.460433] CPU4: thread -1, cpu 0, socket 0, mpidr 80000000
- [ 0.460445] CPU4: detected I-Cache line size mismatch, workaround enabled
- [ 0.460456] CPU4: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
- [ 0.540395] CPU5: thread -1, cpu 1, socket 0, mpidr 80000001
- [ 0.540405] CPU5: detected I-Cache line size mismatch, workaround enabled
- [ 0.540416] CPU5: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
- [ 0.620414] CPU6: thread -1, cpu 2, socket 0, mpidr 80000002
- [ 0.620424] CPU6: detected I-Cache line size mismatch, workaround enabled
- [ 0.620435] CPU6: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
- [ 0.700398] CPU7: thread -1, cpu 3, socket 0, mpidr 80000003
- [ 0.700408] CPU7: detected I-Cache line size mismatch, workaround enabled
- [ 0.700419] CPU7: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
- [ 0.701298] smp: Brought up 1 node, 8 CPUs
- [ 0.701425] SMP: Total of 8 processors activated (384.00 BogoMIPS).
- [ 0.701551] CPU: All CPU(s) started in HYP mode.
- [ 0.701651] CPU: Virtualization extensions available.
- [ 0.706638] devtmpfs: initialized
- [ 0.767216] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
- [ 0.770167] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
- [ 0.770336] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
- [ 0.773113] pinctrl core: initialized pinctrl subsystem
- [ 0.779176] NET: Registered protocol family 16
- [ 0.794424] DMA: preallocated 256 KiB pool for atomic coherent allocations
- [ 0.801135] cpuidle: using governor menu
- [ 0.802316] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
- [ 0.802478] hw-breakpoint: maximum watchpoint size is 8 bytes.
- [ 0.907229] EXYNOS5420 PMU initialized
- [ 1.020758] random: fast init done
- [ 1.178663] SCSI subsystem initialized
- [ 1.179447] usbcore: registered new interface driver usbfs
- [ 1.179709] usbcore: registered new interface driver hub
- [ 1.180106] usbcore: registered new device driver usb
- [ 1.181884] s3c-i2c 12c80000.i2c: slave address 0x00
- [ 1.181971] s3c-i2c 12c80000.i2c: bus frequency set to 65 KHz
- [ 1.183119] s3c-i2c 12c80000.i2c: i2c-2: S3C I2C adapter
- [ 1.185805] Advanced Linux Sound Architecture Driver Initialized.
- [ 1.188166] nfc: nfc_init: NFC Core ver 0.1
- [ 1.188471] NET: Registered protocol family 39
- [ 1.189667] clocksource: Switched to clocksource mct-frc
- [ 1.823037] NET: Registered protocol family 2
- [ 1.825126] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 20480 bytes, linear)
- [ 1.825383] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
- [ 1.825660] TCP bind hash table entries: 8192 (order: 6, 294912 bytes, linear)
- [ 1.827584] TCP: Hash tables configured (established 8192 bind 8192)
- [ 1.828102] UDP hash table entries: 512 (order: 3, 40960 bytes, linear)
- [ 1.828480] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes, linear)
- [ 1.829293] NET: Registered protocol family 1
- [ 1.831692] RPC: Registered named UNIX socket transport module.
- [ 1.831836] RPC: Registered udp transport module.
- [ 1.831910] RPC: Registered tcp transport module.
- [ 1.831982] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 1.834000] Trying to unpack rootfs image as initramfs...
- [ 2.296379] Freeing initrd memory: 6404K
- [ 2.299821] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
- [ 2.301880] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
- [ 2.308581] Initialise system trusted keyrings
- [ 2.309365] workingset: timestamp_bits=30 max_order=19 bucket_order=0
- [ 2.339314] NFS: Registering the id_resolver key type
- [ 2.339518] Key type id_resolver registered
- [ 2.339853] Key type id_legacy registered
- [ 2.340058] romfs: ROMFS MTD (C) 2007 Red Hat, Inc.
- [ 2.388472] Key type asymmetric registered
- [ 2.388620] Asymmetric key parser 'x509' registered
- [ 2.388987] bounce: pool size: 64 pages
- [ 2.389150] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
- [ 2.389306] io scheduler mq-deadline registered
- [ 2.389381] io scheduler kyber registered
- [ 2.395174] samsung-usb2-phy 12130000.phy: 12130000.phy supply vbus not found, using dummy regulator
- [ 2.397860] exynos5_usb3drd_phy 12100000.phy: 12100000.phy supply vbus not found, using dummy regulator
- [ 2.398223] exynos5_usb3drd_phy 12100000.phy: 12100000.phy supply vbus-boost not found, using dummy regulator
- [ 2.399383] exynos5_usb3drd_phy 12500000.phy: 12500000.phy supply vbus not found, using dummy regulator
- [ 2.399832] exynos5_usb3drd_phy 12500000.phy: 12500000.phy supply vbus-boost not found, using dummy regulator
- [ 2.420421] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-241330
- [ 2.420523] dma-pl330 121a0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
- [ 2.429098] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-241330
- [ 2.429197] dma-pl330 121b0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
- [ 2.432041] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-241330
- [ 2.432140] dma-pl330 10800000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
- [ 2.640078] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
- [ 2.645874] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 58, base_baud = 0) is a S3C6400/10
- [ 2.647306] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 59, base_baud = 0) is a S3C6400/10
- [ 2.648525] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 60, base_baud = 0) is a S3C6400/10
- [ 3.521755] printk: console [ttySAC2] enabled
- [ 3.526758] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 61, base_baud = 0) is a S3C6400/10
- [ 3.537707] exynos-trng 10830600.rng: Exynos True Random Number Generator.
- [ 3.546245] exynos-mixer 14450000.mixer: Adding to iommu group 0
- [ 3.596307] brd: module loaded
- [ 3.637623] loop: module loaded
- [ 3.643004] libphy: Fixed MDIO Bus: probed
- [ 3.646454] usbcore: registered new interface driver r8152
- [ 3.651375] usbcore: registered new interface driver asix
- [ 3.656623] usbcore: registered new interface driver ax88179_178a
- [ 3.662750] usbcore: registered new interface driver cdc_ether
- [ 3.668534] usbcore: registered new interface driver smsc75xx
- [ 3.674330] usbcore: registered new interface driver smsc95xx
- [ 3.679988] usbcore: registered new interface driver net1080
- [ 3.685559] usbcore: registered new interface driver cdc_subset
- [ 3.691521] usbcore: registered new interface driver zaurus
- [ 3.697077] usbcore: registered new interface driver cdc_ncm
- [ 3.706355] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 3.711587] ehci-exynos: EHCI EXYNOS driver
- [ 3.716689] exynos-ehci 12110000.usb: EHCI Host Controller
- [ 3.721538] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1
- [ 3.729679] exynos-ehci 12110000.usb: irq 78, io mem 0x12110000
- [ 3.759704] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00
- [ 3.765621] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02
- [ 3.772655] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 3.779831] usb usb1: Product: EHCI Host Controller
- [ 3.784579] usb usb1: Manufacturer: Linux 5.2.0-rc6-next-20190626-xu4ml ehci_hcd
- [ 3.792035] usb usb1: SerialNumber: 12110000.usb
- [ 3.799493] hub 1-0:1.0: USB hub found
- [ 3.802134] hub 1-0:1.0: 3 ports detected
- [ 3.809447] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 3.814336] ohci-exynos: OHCI EXYNOS driver
- [ 3.818815] exynos-ohci 12120000.usb: USB Host Controller
- [ 3.823853] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2
- [ 3.831853] exynos-ohci 12120000.usb: irq 78, io mem 0x12120000
- [ 3.904373] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.02
- [ 3.913713] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 3.919626] usb usb2: Product: USB Host Controller
- [ 3.924282] usb usb2: Manufacturer: Linux 5.2.0-rc6-next-20190626-xu4ml ohci_hcd
- [ 3.931739] usb usb2: SerialNumber: 12120000.usb
- [ 3.937925] hub 2-0:1.0: USB hub found
- [ 3.940547] hub 2-0:1.0: 3 ports detected
- [ 3.947789] usbcore: registered new interface driver uas
- [ 3.951948] usbcore: registered new interface driver usb-storage
- [ 3.959302] udc-core: couldn't find an available UDC - added [g_ether] to list of pending drivers
- [ 3.972255] i2c /dev entries driver
- [ 4.009387] vdd_ldo9: Bringing 3300000uV into 3000000-3000000uV
- [ 4.030576] vddq_mmc2: Bringing 3300000uV into 2800000-2800000uV
- [ 4.056840] vdd_sd: Bringing 3300000uV into 2800000-2800000uV
- [ 4.163254] s5m-rtc s2mps14-rtc: registered as rtc0
- [ 4.167949] s2mps11-clk s2mps11-clk: DMA mask not set
- [ 4.185330] exynos-tmu 10060000.tmu: More trip points than supported by this TMU.
- [ 4.191518] exynos-tmu 10060000.tmu: 2 trip points should be configured in polling mode.
- [ 4.201259] exynos-tmu 10064000.tmu: More trip points than supported by this TMU.
- [ 4.207352] exynos-tmu 10064000.tmu: 2 trip points should be configured in polling mode.
- [ 4.217154] exynos-tmu 10068000.tmu: More trip points than supported by this TMU.
- [ 4.223337] exynos-tmu 10068000.tmu: 2 trip points should be configured in polling mode.
- [ 4.233073] exynos-tmu 1006c000.tmu: More trip points than supported by this TMU.
- [ 4.239168] exynos-tmu 1006c000.tmu: 2 trip points should be configured in polling mode.
- [ 4.251900] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled
- [ 4.260761] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com
- [ 4.313406] sdhci: Secure Digital Host Controller Interface driver
- [ 4.318132] sdhci: Copyright(c) Pierre Ossman
- [ 4.322851] Synopsys Designware Multimedia Card Interface Driver
- [ 4.329563] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode.
- [ 4.335439] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
- [ 4.341757] dwmmc_exynos 12200000.mmc: Version ID is 250a
- [ 4.347136] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 80,64 bit host data width,64 deep fifo
- [ 4.357089] dwmmc_exynos 12200000.mmc: allocated mmc-pwrseq
- [ 4.383454] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
- [ 4.406481] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode.
- [ 4.413790] dwmmc_exynos 12220000.mmc: Using internal DMA controller.
- [ 4.418832] dwmmc_exynos 12220000.mmc: Version ID is 250a
- [ 4.424415] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 81,64 bit host data width,64 deep fifo
- [ 4.459845] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
- [ 4.537014] s5p-secss 10830000.sss: s5p-sss driver registered
- [ 4.541511] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
- [ 4.553006] usbcore: registered new interface driver usbhid
- [ 4.554453] mmc1: new ultra high speed DDR50 SDHC card at address 0001
- [ 4.557151] usbhid: USB HID core driver
- [ 4.567831] mmcblk1: mmc1:0001 00000 29.8 GiB
- [ 4.578968] mmcblk1: p1
- [ 4.599650] exynos-nocp: new NoC Probe device registered: 10ca1000.nocp
- [ 4.605179] exynos-nocp: new NoC Probe device registered: 10ca1400.nocp
- [ 4.611937] exynos-nocp: new NoC Probe device registered: 10ca1800.nocp
- [ 4.618307] exynos-nocp: new NoC Probe device registered: 10ca1c00.nocp
- [ 4.640199] NET: Registered protocol family 10
- [ 4.645350] Segment Routing with IPv6
- [ 4.647631] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
- [ 4.655978] NET: Registered protocol family 17
- [ 4.659086] NET: Registered protocol family 15
- [ 4.663725] Key type dns_resolver registered
- [ 4.668467] Registering SWP/SWPB emulation handler
- [ 4.674568] Loading compiled-in X.509 certificates
- [ 4.760676] OF: graph: no port node found in /soc/hdmi@14530000
- [ 4.769019] [drm] Exynos DRM: using 14450000.mixer device for DMA mapping operations
- [ 4.775660] exynos-drm exynos-drm: bound 14450000.mixer (ops mixer_component_ops)
- [ 4.783010] exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_component_ops)
- [ 4.790125] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
- [ 4.796663] [drm] No driver support for vblank timestamp query.
- [ 4.803161] [drm] Cannot find any crtc or sizes
- [ 4.808733] [drm] Cannot find any crtc or sizes
- [ 4.812989] [drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 0
- [ 4.821592] dwc3 12000000.dwc3: Failed to get clk 'ref': -2
- [ 4.827131] xhci-hcd exynos5-dwc3-xhci.4.auto: xHCI Host Controller
- [ 4.832116] xhci-hcd exynos5-dwc3-xhci.4.auto: new USB bus registered, assigned bus number 3
- [ 4.841043] xhci-hcd exynos5-dwc3-xhci.4.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010090
- [ 4.850660] xhci-hcd exynos5-dwc3-xhci.4.auto: irq 153, io mem 0x12000000
- [ 4.858172] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02
- [ 4.865551] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 4.872733] usb usb3: Product: xHCI Host Controller
- [ 4.877529] usb usb3: Manufacturer: Linux 5.2.0-rc6-next-20190626-xu4ml xhci-hcd
- [ 4.884944] usb usb3: SerialNumber: exynos5-dwc3-xhci.4.auto
- [ 4.891667] hub 3-0:1.0: USB hub found
- [ 4.894418] hub 3-0:1.0: 1 port detected
- [ 4.898914] xhci-hcd exynos5-dwc3-xhci.4.auto: xHCI Host Controller
- [ 4.904466] xhci-hcd exynos5-dwc3-xhci.4.auto: new USB bus registered, assigned bus number 4
- [ 4.912909] xhci-hcd exynos5-dwc3-xhci.4.auto: Host supports USB 3.0 SuperSpeed
- [ 4.920366] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
- [ 4.928421] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.02
- [ 4.936429] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 4.943608] usb usb4: Product: xHCI Host Controller
- [ 4.948412] usb usb4: Manufacturer: Linux 5.2.0-rc6-next-20190626-xu4ml xhci-hcd
- [ 4.955823] usb usb4: SerialNumber: exynos5-dwc3-xhci.4.auto
- [ 4.962447] hub 4-0:1.0: USB hub found
- [ 4.965187] hub 4-0:1.0: 1 port detected
- [ 4.972602] dwc3 12400000.dwc3: Failed to get clk 'ref': -2
- [ 4.977507] xhci-hcd exynos5-dwc3-xhci.5.auto: xHCI Host Controller
- [ 4.983037] xhci-hcd exynos5-dwc3-xhci.5.auto: new USB bus registered, assigned bus number 5
- [ 4.991938] xhci-hcd exynos5-dwc3-xhci.5.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010090
- [ 5.001658] xhci-hcd exynos5-dwc3-xhci.5.auto: irq 154, io mem 0x12400000
- [ 5.009038] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02
- [ 5.016543] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 5.023725] usb usb5: Product: xHCI Host Controller
- [ 5.028533] usb usb5: Manufacturer: Linux 5.2.0-rc6-next-20190626-xu4ml xhci-hcd
- [ 5.035948] usb usb5: SerialNumber: exynos5-dwc3-xhci.5.auto
- [ 5.042589] hub 5-0:1.0: USB hub found
- [ 5.045314] hub 5-0:1.0: 1 port detected
- [ 5.049812] xhci-hcd exynos5-dwc3-xhci.5.auto: xHCI Host Controller
- [ 5.055418] xhci-hcd exynos5-dwc3-xhci.5.auto: new USB bus registered, assigned bus number 6
- [ 5.064099] xhci-hcd exynos5-dwc3-xhci.5.auto: Host supports USB 3.0 SuperSpeed
- [ 5.071279] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
- [ 5.079429] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.02
- [ 5.087432] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 5.094616] usb usb6: Product: xHCI Host Controller
- [ 5.099416] usb usb6: Manufacturer: Linux 5.2.0-rc6-next-20190626-xu4ml xhci-hcd
- [ 5.106827] usb usb6: SerialNumber: exynos5-dwc3-xhci.5.auto
- [ 5.113397] hub 6-0:1.0: USB hub found
- [ 5.116188] hub 6-0:1.0: 1 port detected
- [ 5.122540] s3c-rtc 101e0000.rtc: registered as rtc1
- [ 5.129926] exynos-bus: new bus device registered: soc:bus_wcore ( 84000 KHz ~ 400000 KHz)
- [ 5.138156] exynos-bus: new bus device registered: soc:bus_noc ( 67000 KHz ~ 100000 KHz)
- [ 5.145814] exynos-bus: new bus device registered: soc:bus_fsys_apb (100000 KHz ~ 200000 KHz)
- [ 5.154086] exynos-bus: new bus device registered: soc:bus_fsys (100000 KHz ~ 200000 KHz)
- [ 5.162633] exynos-bus: new bus device registered: soc:bus_fsys2 ( 75000 KHz ~ 150000 KHz)
- [ 5.171159] exynos-bus: new bus device registered: soc:bus_mfc ( 96000 KHz ~ 333000 KHz)
- [ 5.179118] exynos-bus: new bus device registered: soc:bus_gen ( 89000 KHz ~ 267000 KHz)
- [ 5.186718] exynos-bus: new bus device registered: soc:bus_peri ( 67000 KHz ~ 67000 KHz)
- [ 5.195633] exynos-bus: new bus device registered: soc:bus_g2d ( 84000 KHz ~ 333000 KHz)
- [ 5.203664] exynos-bus: new bus device registered: soc:bus_g2d_acp ( 67000 KHz ~ 267000 KHz)
- [ 5.212056] exynos-bus: new bus device registered: soc:bus_jpeg ( 75000 KHz ~ 300000 KHz)
- [ 5.220206] exynos-bus: new bus device registered: soc:bus_jpeg_apb ( 84000 KHz ~ 167000 KHz)
- [ 5.228323] exynos-bus: new bus device registered: soc:bus_disp1_fimd (120000 KHz ~ 200000 KHz)
- [ 5.237202] exynos-bus: new bus device registered: soc:bus_disp1 (120000 KHz ~ 300000 KHz)
- [ 5.245401] exynos-bus: new bus device registered: soc:bus_gscl_scaler (150000 KHz ~ 300000 KHz)
- [ 5.254506] exynos-bus: new bus device registered: soc:bus_mscl ( 84000 KHz ~ 400000 KHz)
- [ 5.267624] input: gpio_keys as /devices/platform/gpio_keys/input/input0
- [ 5.278310] s5m-rtc s2mps14-rtc: setting system clock to 2019-06-28T10:41:37 UTC (1561718497)
- [ 5.285704] cfg80211: Loading compiled-in X.509 certificates for regulatory database
- [ 5.325271] cfg80211: Problem loading in-kernel X.509 certificate (-13)
- [ 5.331220] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
- [ 5.339103] cfg80211: failed to load regulatory.db
- [ 5.386977] ALSA device list:
- [ 5.388858] No soundcards found.
- [ 5.397612] Freeing unused kernel memory: 1024K
- [ 5.410174] usb 4-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
- [ 5.441108] Run /init as init process
- [ 5.452069] usb 4-1: New USB device found, idVendor=05e3, idProduct=0616, bcdDevice=22.23
- [ 5.459945] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 5.466648] usb 4-1: Product: USB3.0 Hub
- [ 5.470194] usb 4-1: Manufacturer: GenesysLogic
- [ 5.497606] hub 4-1:1.0: USB hub found
- [ 5.500661] hub 4-1:1.0: 2 ports detected
- :: running early hook [udev]
- Warning: /lib/modules/5.2.0-rc6-next-20190626-xu4ml/modules.devname not found - ignoring
- [ 5.599678] usb 3-1: new high-speed USB device number 2 using xhci-hcd
- Starting version 242.29-3-arch
- :: running hook [udev]
- :: Triggering uevents...
- [ 5.794111] usb 3-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=22.23
- [ 5.800899] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 5.807945] usb 3-1: Product: USB2.0 Hub
- [ 5.811912] usb 3-1: Manufacturer: GenesysLogic
- [ 5.881067] hub 3-1:1.0: USB hub found
- [ 5.885093] hub 3-1:1.0: 2 ports detected
- [ 5.935737] dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-241330
- [ 5.942471] dma-pl330 3880000.adma: DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6
- [ 5.950931] samsung-i2s 3830000.i2s-sec: DMA channels sourced from device 3830000.i2s
- [ 5.969722] dma-pl330 3880000.adma: PM domain MAU will not be powered off
- [ 5.978492] odroid-audio sound: snd-soc-dummy-dai <-> samsung-i2s mapping ok
- [ 5.984471] odroid-audio sound: i2s-hifi <-> snd-soc-dummy-dai mapping ok
- [ 5.991881] odroid-audio sound: snd-soc-dummy-dai <-> samsung-i2s-sec mapping ok
- [ 7.019896] usb 4-1.1: new SuperSpeed Gen 1 USB device number 3 using xhci-hcd
- [ 7.063032] usb 4-1.1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice=63.01
- [ 7.070484] usb 4-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 7.077438] usb 4-1.1: Product: JMS567
- [ 7.081749] usb 4-1.1: Manufacturer: JMicron
- [ 7.086028] usb 4-1.1: SerialNumber: DB12345678A3
- [ 7.151572] scsi host0: uas
- [ 7.162765] scsi 0:0:0:0: Direct-Access KINGSTON SA400S37120G 6301 PQ: 0 ANSI: 6
- [ 7.176231] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
- [ 7.177550] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 7.183547] sd 0:0:0:0: [sda] 4096-byte physical blocks
- [ 7.201150] sd 0:0:0:0: [sda] Write Protect is off
- [ 7.204977] sd 0:0:0:0: [sda] Disabling FUA
- [ 7.209476] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 7.219411] sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
- [ 7.713603] sda: sda1
- [ 7.736338] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 11.372630] xhci-hcd exynos5-dwc3-xhci.5.auto: Timeout while waiting for setup device command
- [ 16.650624] xhci-hcd exynos5-dwc3-xhci.5.auto: Timeout while waiting for setup device command
- [ 16.870255] usb 6-1: device not accepting address 2, error -62
- [ 22.171093] xhci-hcd exynos5-dwc3-xhci.5.auto: Timeout while waiting for setup device command
- [ 27.451021] xhci-hcd exynos5-dwc3-xhci.5.auto: Timeout while waiting for setup device command
- [ 27.669956] usb 6-1: device not accepting address 3, error -62
- [ 27.711656] usb usb6-port1: attempt power cycle
- [ 28.561364] random: crng init done
- :: performing fsck on '/dev/mmcblk1p1'
- /dev/mmcblk1p1: clean, 98434/1954064 files, 1648388/7814656 blocks
- :: mounting '/dev/mmcblk1p1' on real root
- [ 30.319068] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null)
- :: running cleanup hook [udev]
- [ 31.097974] systemd[1]: systemd 242.29-3-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
- [ 31.123657] systemd[1]: Detected architecture arm.
- Welcome to Arch Linux ARM!
- [ 31.173780] systemd[1]: Set hostname to <archl-xu4m>.
- [ 31.201446] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument
- [ 31.596864] systemd[1]: File /usr/lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
- [ 31.612957] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
- [ 31.899962] systemd[1]: Reached target Swap.
- [ OK ] Reached target Swap.
- [ 31.936150] systemd[1]: Listening on LVM2 poll daemon socket.
- [ OK ] Listening on LVM2 poll daemon socket.
- [ 31.981882] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
- [ OK ] Started Dispatch Password ?ts to Console Directory Watch.
- [ 32.077378] systemd[1]: Listening on Process Core Dump Socket.
- [ OK ] Listening on Process Core Dump Socket.
- [ OK ] Listening on Journal Socket.
- Mounting Temporary Directory (/tmp)...
- [ OK ] Listening on udev Control Socket.
- [ OK ] Reached target Remote File Systems.
- Starting Apply Kernel Variables...
- [ OK ] Listening on Journal Socket (/dev/log).
- [ OK ] Listening on initctl Compatibility Named Pipe.
- [ OK ] Created slice system-getty.slice.
- [ OK ] Created slice User and Session Slice.
- [ OK ] Reached target Slices.
- Starting Create list of re?odes for the current kernel...
- Mounting Kernel Debug File System...
- [ OK ] Listening on Network Service Netlink Socket.
- [ OK ] Started Forward Password R?uests to Wall Directory Watch.
- [ OK ] Reached target Paths.
- [ OK ] Reached target Local Encrypted Volumes.
- [ OK ] Listening on udev Kernel Socket.
- [ OK ] Listening on Device-mapper event daemon FIFOs.
- Starting Journal Service...
- Starting udev Coldplug all Devices...
- [ OK ] Listening on LVM2 metadata daemon socket.
- Starting Monitoring of LVM?meventd or progress polling...
- Mounting Kernel Configuration File System...
- [ OK ] Created slice system-serial\x2dgetty.slice.
- Starting Remount Root and Kernel File Systems...
- [ OK ] Mounted Temporary Directory (/tmp).
- [ OK ] Started Apply Kernel Variables.
- [ OK ] Started Create list of req? nodes for the current kernel.
- [ OK ] Mounted Kernel Debug File System.
- [ OK ] Mounted Kernel Configuration File System.
- [ OK ] Started Remount Root and Kernel File Systems.
- [ OK ] Started Journal Service.
- [ OK ] Started LVM2 metadata daemon.
- Starting Load/Save Random Seed...
- Starting Flush Journal to Persistent Storage...
- Starting Create Static Device Nodes in /dev...
- [ OK ] Started Load/Save Random Seed.
- [ 33.578276] systemd-journald[218]: Received request to flush runtime journal from PID 1
- [ OK ] Started Create Static Device Nodes in /dev.
- Starting udev Kernel Device Manager...
- [ OK ] Started udev Kernel Device Manager.
- Starting Network Service...
- [ OK ] Started udev Coldplug all Devices.
- [ OK ] Started Flush Journal to Persistent Storage.
- [ 34.513977] mc: Linux media interface: v0.10
- [ OK ] Started Network Service.
- [ 34.585792] videodev: Linux video capture interface: v2.00
- [ OK ] Found device /dev/ttySAC2.
- [ 34.721191] s5p-jpeg 11f50000.jpeg: Adding to iommu group 1
- [ 34.726553] s5p-jpeg 11f50000.jpeg: encoder device registered as /dev/video0
- [ 34.741259] s5p-jpeg 11f50000.jpeg: decoder device registered as /dev/video1
- [ 34.746984] s5p-jpeg 11f50000.jpeg: Samsung S5P JPEG codec
- [ 34.753851] s5p-jpeg 11f60000.jpeg: Adding to iommu group 2
- [ 34.756850] exynos-gsc 13e00000.video-scaler: Adding to iommu group 3
- [ 34.768127] s5p-jpeg 11f60000.jpeg: encoder device registered as /dev/video2
- [ 34.769673] exynos-gsc 13e10000.video-scaler: Adding to iommu group 4
- [ 34.774710] s5p-jpeg 11f60000.jpeg: decoder device registered as /dev/video4
- [ 34.787775] s5p-jpeg 11f60000.jpeg: Samsung S5P JPEG codec
- [ 34.834252] s5p-mfc 11000000.codec: Adding to iommu group 5
- [ 34.849297] s5p-mfc 11000000.codec: preallocated 8 MiB buffer for the firmware and context buffers
- [ 34.902287] s5p-mfc 11000000.codec: decoder registered as /dev/video6
- [ 34.908365] s5p-mfc 11000000.codec: encoder registered as /dev/video7
- [ OK ] Started Monitoring of LVM2? dmeventd or progress polling.
- [ OK ] Reached target Local File Systems (Pre).
- [ OK ] Reached target Local File Systems.
- [ OK ] Reached target Sound Card.
- Starting Create Volatile Files and Directories...
- [ OK ] Started Create Volatile Files and Directories.
- Starting Network Time Synchronization...
- Starting Update UTMP about System Boot/Shutdown...
- Starting Network Name Resolution...
- Starting Entropy Harvesting Daemon...
- [ OK ] Started Entropy Harvesting Daemon.
- [ OK ] Started Network Time Synchronization.
- [ OK ] Reached target System Time Set.
- [ OK ] Reached target System Time Synchronized.
- [ OK ] Started Update UTMP about System Boot/Shutdown.
- [ OK ] Reached target System Initialization.
- [ OK ] Started Daily man-db regeneration.
- [ OK ] Started Daily rotation of log files.
- [ OK ] Listening on D-Bus System Message Bus Socket.
- [ OK ] Reached target Sockets.
- [ OK ] Reached target Basic System.
- Starting Apply cpupower configuration...
- Starting Login Service...
- [ OK ] Started Daily Cleanup of Temporary Directories.
- [ OK ] Started D-Bus System Message Bus.
- [ OK ] Started Daily verification of password and group files.
- [ OK ] Reached target Timers.
- [ OK ] Started Network Name Resolution.
- [ OK ] Started Apply cpupower configuration.
- [ OK ] Reached target Host and Network Name Lookups.
- [ OK ] Reached target Network.
- [ OK ] Started OpenSSH Daemon.
- Starting Permit User Sessions...
- [ OK ] Started Permit User Sessions.
- [ OK ] Started Serial Getty on ttySAC2.
- [ OK ] Started Getty on tty1.
- [ OK ] Reached target Login Prompts.
- [ OK ] Started Login Service.
- [ OK ] Reached target Multi-User System.
- [ OK ] Reached target Graphical Interface.
- Arch Linux 5.2.0-rc6-next-20190626-xu4ml (ttySAC2)
- archl-xu4m login: root
- Password:
- Last login: Fri Jun 28 10:41:14 on ttySAC2
- [root@archl-xu4m ~]# lsusb -t
- /: Bus 06.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M
- /: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 480M
- /: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M
- |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/2p, 5000M
- |__ Port 1: Dev 3, If 0, Class=Mass Storage, Driver=uas, 5000M
- /: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 480M
- |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/2p, 480M
- /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=exynos-ohci/3p, 12M
- /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=exynos-ehci/3p, 480M
- [root@archl-xu4m ~]#
- [root@archl-xu4m ~]#
- [root@archl-xu4m ~]#
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement