Pastebin
API
tools
faq
paste
Login
Sign up
Please fix the following errors:
New Paste
Syntax Highlighting
archl-xu4m login: root Password: Last login: Fri Jun 28 10:39:05 on ttySAC2 [root@archl-xu4m ~]# re -bash: re: command not found [root@archl-xu4m ~]# reboot [ OK ] Stopped target Graphical Interface. Starting Generate shutdown-ramfs... [ OK ] Stopped targe Stopping Session c1 of user root. [ OK ] Stopped Daily Cleanup of Temporary Directories. [ OK ] Stopped Daily verification of password and group files. [ OK ] Stopped target Multi-User System. [ OK ] Stopped Daily man-db regeneration. [ OK ] Stopped target System Time Synchronized. [ OK ] Stopped target System Time Set. [ OK ] Stopped target Login Prompts. Stopping OpenSSH Daemon... [ OK ] Stopped Apply cpupower configuration. Stopping Serial Getty on ttySAC2... [ OK ] Stopped target Host and Network Name Lookups. Stopping Getty on tty1... [ OK ] Stopped OpenSSH Daemon. [ OK ] Stopped Getty on tty1. [ OK ] Stopped Serial Getty on ttySAC2. [ OK ] Stopped Session c1 of user root. Stopping User Manager for UID 0... Stopping Login Service... [ OK ] Removed slice system-serial\x2dgetty.slice. [ OK ] Removed slice system-getty.slice. [ OK ] Stopped User Manager for UID 0. Stopping User Runtime Directory /run/user/0... [ OK ] Unmounted /run/user/0. [ OK ] Stopped User Runtime Directory /run/user/0. Stopping D-Bus System Message Bus... [ OK ] Removed slice User Slice of UID 0. Stopping Permit User Sessions... [ OK ] Stopped D-Bus System Message Bus. [ OK ] Stopped Login Service. [ OK ] Stopped Permit User Sessions. [ OK ] Stopped target Remote File Systems. [ OK ] Stopped target Network. Stopping Network Name Resolution... [ OK ] Stopped target Basic System. [ OK ] Stopped target Paths. [ OK ] Stopped target Slices. [ OK ] Removed slice User and Session Slice. [ OK ] Stopped target Sockets. [ OK ] Closed D-Bus System Message Bus Socket. [ OK ] Stopped target System Initialization. [ OK ] Stopped target Local Encrypted Volumes. [ OK ] Stopped Forward Password R?uests to Wall Directory Watch. [ OK ] Stopped Dispatch Password ?ts to Console Directory Watch. Stopping Entropy Harvesting Daemon... Stopping Update UTMP about System Boot/Shutdown... Stopping Network Time Synchronization... [ OK ] Stopped Network Name Resolution. [ OK ] Stopped Network Time Synchronization. [ OK ] Stopped Entropy Harvesting Daemon. [ OK ] Started Generate shutdown-ramfs. Stopping Load/Save Random Seed... Stopping Network Service... [ OK ] Stopped Update UTMP about System Boot/Shutdown. [ OK ] Stopped Load/Save Random Seed. [ OK ] Stopped Network Service. [ OK ] Stopped Apply Kernel Variables. [ OK ] Stopped Create Volatile Files and Directories. [ OK ] Stopped target Local File Systems. [ OK ] Stopped target Local File Systems (Pre). [ OK ] Stopped Create Static Device Nodes in /dev. Stopping Monitoring of LVM?meventd or progress polling... Unmounting Temporary Directory (/tmp)... [ OK ] Stopped Remount Root and Kernel File Systems. [ OK ] Unmounted Temporary Directory (/tmp). [ OK ] Reached target Unmount All Filesystems. [ OK ] Stopped target Swap. [ OK ] Stopped Monitoring of LVM2? dmeventd or progress polling. Stopping LVM2 metadata daemon... [ OK ] Stopped LVM2 metadata daemon. [ OK ] Reached target Shutdown. [ OK ] Reached target Final Step. [ OK ] Started Reboot. [ OK ] Reached target Reboot. [ OK ] Closed LVM2 metadata daemon socket. [ 118.751009] printk: systemd-shutdow: 47 output lines suppressed due to ratelimiting [ 118.830653] systemd-shutdown[1]: Syncing filesystems and block devices. [ 119.193133] systemd-shutdown[1]: Sending SIGTERM to remaining processes... [ 119.223504] systemd-journald[221]: Received SIGTERM from PID 1 (systemd-shutdow). [ 119.282201] systemd-shutdown[1]: Sending SIGKILL to remaining processes... [ 119.311541] systemd-shutdown[1]: Hardware watchdog 'S3C2410 Watchdog', version 0 [ 119.323683] systemd-shutdown[1]: Unmounting file systems. [ 119.346031] [406]: Remounting '/' read-only in with options '(null)'. [ 119.442527] EXT4-fs (mmcblk1p1): re-mounted. Opts: (null) [ 119.480248] systemd-shutdown[1]: All filesystems unmounted. [ 119.484438] systemd-shutdown[1]: Deactivating swaps. [ 119.489461] systemd-shutdown[1]: All swaps deactivated. [ 119.494671] systemd-shutdown[1]: Detaching loop devices. [ 119.509608] systemd-shutdown[1]: All loop devices detached. [ 119.674475] printk: shutdown: 5 output lines suppressed due to ratelimiting [ 119.749176] shutdown[1]: Syncing filesystems and block devices. [ 119.768803] shutdown[1]: Sending SIGTERM to remaining processes... [ 119.802600] shutdown[1]: Sending SIGKILL to remaining processes... [ 119.820083] shutdown[1]: Hardware watchdog 'S3C2410 Watchdog', version 0 [ 119.825395] shutdown[1]: Unmounting file systems. [ 119.854797] sd-umoun[411]: Unmounting '/oldroot/sys/kernel/debug'. [ 119.885480] sd-umoun[412]: Unmounting '/oldroot/sys/kernel/config'. [ 119.904675] sd-umoun[413]: Unmounting '/oldroot/sys/fs/cgroup/systemd'. [ 119.927642] sd-umoun[414]: Unmounting '/oldroot/sys/fs/cgroup/unified'. [ 119.952807] sd-umoun[415]: Unmounting '/oldroot/sys/fs/cgroup'. [ 119.974061] sd-umoun[416]: Unmounting '/oldroot/dev/pts'. [ 119.998004] sd-umoun[417]: Unmounting '/oldroot/dev/shm'. [ 120.016285] sd-umoun[418]: Unmounting '/oldroot/sys/kernel/security'. [ 120.037738] sd-umoun[419]: Unmounting '/oldroot'. [ 120.041466] sd-umoun[419]: Failed to unmount /oldroot: Device or resource busy [ 120.066940] sd-umoun[420]: Unmounting '/oldroot/run'. [ 120.084864] sd-umoun[421]: Unmounting '/oldroot/dev'. [ 120.101876] sd-umoun[422]: Unmounting '/oldroot/sys'. [ 120.117704] sd-umoun[423]: Unmounting '/oldroot/proc'. [ 120.135186] sd-umoun[424]: Unmounting '/oldroot'. [ 120.235091] shutdown[1]: All filesystems unmounted. [ 120.238554] shutdown[1]: Deactivating swaps. [ 120.242966] shutdown[1]: All swaps deactivated. [ 120.247294] shutdown[1]: Detaching loop devices. [ 120.260813] shutdown[1]: All loop devices detached. [ 120.308592] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 120.425890] usb 4-1.1: reset SuperSpeed Gen 1 USB device number 3 using xhci-hcd [ 120.500085] wake enabled for irq 155 [ 120.592335] reboot: Restartin U-Boot 2018.01-2 (Feb 15 2018 - 02:09:52 +0000) Arch Linux ARM CPU: Exynos5422 @ 800 MHz Model: Odroid XU3 based on EXYNOS5422 Board: Odroid XU3 based on EXYNOS5422 Type: xu4 DRAM: 2 GiB MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 0 Card did not respond to voltage select! mmc_init: -95, time 11 switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found U-Boot script /boot/boot.scr 2269 bytes read in 22 ms (100.6 KiB/s) ## Executing script at 50000000 7097632 bytes read in 544 ms (12.4 MiB/s) 59066 bytes read in 46 ms (1.2 MiB/s) 6557116 bytes read in 512 ms (12.2 MiB/s) Kernel image @ 0x42000000 [ 0x000000 - 0x6c4d20 ] ## Flattened Device Tree blob at 43000000 Booting using the fdt blob at 0x43000000 Loading Ramdisk to 4f9bf000, end 4ffffdbc ... OK Loading Device Tree to 4f9ad000, end 4f9be6b9 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 5.2.0-rc6-next-20190626-xu4ml (alarm@archl-xu4m) (gcc version 8.3.0 (GCC)) #21 SMP PREEMPT Fri Jun 28 09:21:21 UTC 2019 [ 0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Hardkernel Odroid XU4 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 96 MiB at 0x6a000000 [ 0.000000] Samsung CPU ID: 0xe5422001 [ 0.000000] Running under secure firmware. [ 0.000000] percpu: Embedded 21 pages/cpu s54888 r8192 d22936 u86016 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 517120 [ 0.000000] Kernel command line: console=tty1 console=ttySAC2,115200n8 root=PARTUUID=4571b77a-01 rw rootwait smsc95xx.macaddr= log_buf_len=10M [ 0.000000] printk: log_buf_len: 16777216 bytes [ 0.000000] printk: early log buf free: 129652(98%) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1912364K/2074624K available (10240K kernel code, 829K rwdata, 3568K rodata, 1024K init, 6803K bss, 63956K reserved, 98304K cma-reserved, 1288192K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Running RCU self tests [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU lockdep checking is enabled. [ 0.000000] Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] random: get_random_bytes called from start_kernel+0x374/0x51c with crng_init=0 [ 0.000000] Switching to timer-based delay loop, resolution 41ns [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000009] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.000081] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 49 [ 0.001757] Console: colour dummy device 80x30 [ 0.004766] printk: console [tty1] enabled [ 0.004847] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.004969] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.005044] ... MAX_LOCK_DEPTH: 48 [ 0.005119] ... MAX_LOCKDEP_KEYS: 8192 [ 0.005197] ... CLASSHASH_SIZE: 4096 [ 0.005274] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.005353] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.005431] ... CHAINHASH_SIZE: 32768 [ 0.005509] memory used by lock dependency info: 4413 kB [ 0.005600] per task-struct memory footprint: 1536 bytes [ 0.005799] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.005965] pid_max: default: 32768 minimum: 301 [ 0.006505] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.006647] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.009440] *** VALIDATE proc *** [ 0.010700] *** VALIDATE cgroup1 *** [ 0.010787] *** VALIDATE cgroup2 *** [ 0.010873] CPU: Testing write buffer coherency: ok [ 0.013222] CPU0: thread -1, cpu 0, socket 1, mpidr 80000100 [ 0.070149] Setting up static identity map for 0x40100000 - 0x40100060 [ 0.071211] ARM CCI driver probed [ 0.071650] Exynos MCPM support installed [ 0.090004] rcu: Hierarchical SRCU implementation. [ 0.140015] smp: Bringing up secondary CPUs ... [ 0.220603] CPU1: thread -1, cpu 1, socket 1, mpidr 80000101 [ 0.300463] CPU2: thread -1, cpu 2, socket 1, mpidr 80000102 [ 0.380505] CPU3: thread -1, cpu 3, socket 1, mpidr 80000103 [ 0.460433] CPU4: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.460445] CPU4: detected I-Cache line size mismatch, workaround enabled [ 0.460456] CPU4: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.540395] CPU5: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.540405] CPU5: detected I-Cache line size mismatch, workaround enabled [ 0.540416] CPU5: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.620414] CPU6: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.620424] CPU6: detected I-Cache line size mismatch, workaround enabled [ 0.620435] CPU6: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.700398] CPU7: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.700408] CPU7: detected I-Cache line size mismatch, workaround enabled [ 0.700419] CPU7: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.701298] smp: Brought up 1 node, 8 CPUs [ 0.701425] SMP: Total of 8 processors activated (384.00 BogoMIPS). [ 0.701551] CPU: All CPU(s) started in HYP mode. [ 0.701651] CPU: Virtualization extensions available. [ 0.706638] devtmpfs: initialized [ 0.767216] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.770167] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.770336] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.773113] pinctrl core: initialized pinctrl subsystem [ 0.779176] NET: Registered protocol family 16 [ 0.794424] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.801135] cpuidle: using governor menu [ 0.802316] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.802478] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.907229] EXYNOS5420 PMU initialized [ 1.020758] random: fast init done [ 1.178663] SCSI subsystem initialized [ 1.179447] usbcore: registered new interface driver usbfs [ 1.179709] usbcore: registered new interface driver hub [ 1.180106] usbcore: registered new device driver usb [ 1.181884] s3c-i2c 12c80000.i2c: slave address 0x00 [ 1.181971] s3c-i2c 12c80000.i2c: bus frequency set to 65 KHz [ 1.183119] s3c-i2c 12c80000.i2c: i2c-2: S3C I2C adapter [ 1.185805] Advanced Linux Sound Architecture Driver Initialized. [ 1.188166] nfc: nfc_init: NFC Core ver 0.1 [ 1.188471] NET: Registered protocol family 39 [ 1.189667] clocksource: Switched to clocksource mct-frc [ 1.823037] NET: Registered protocol family 2 [ 1.825126] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 20480 bytes, linear) [ 1.825383] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 1.825660] TCP bind hash table entries: 8192 (order: 6, 294912 bytes, linear) [ 1.827584] TCP: Hash tables configured (established 8192 bind 8192) [ 1.828102] UDP hash table entries: 512 (order: 3, 40960 bytes, linear) [ 1.828480] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes, linear) [ 1.829293] NET: Registered protocol family 1 [ 1.831692] RPC: Registered named UNIX socket transport module. [ 1.831836] RPC: Registered udp transport module. [ 1.831910] RPC: Registered tcp transport module. [ 1.831982] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.834000] Trying to unpack rootfs image as initramfs... [ 2.296379] Freeing initrd memory: 6404K [ 2.299821] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 2.301880] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 2.308581] Initialise system trusted keyrings [ 2.309365] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 2.339314] NFS: Registering the id_resolver key type [ 2.339518] Key type id_resolver registered [ 2.339853] Key type id_legacy registered [ 2.340058] romfs: ROMFS MTD (C) 2007 Red Hat, Inc. [ 2.388472] Key type asymmetric registered [ 2.388620] Asymmetric key parser 'x509' registered [ 2.388987] bounce: pool size: 64 pages [ 2.389150] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 2.389306] io scheduler mq-deadline registered [ 2.389381] io scheduler kyber registered [ 2.395174] samsung-usb2-phy 12130000.phy: 12130000.phy supply vbus not found, using dummy regulator [ 2.397860] exynos5_usb3drd_phy 12100000.phy: 12100000.phy supply vbus not found, using dummy regulator [ 2.398223] exynos5_usb3drd_phy 12100000.phy: 12100000.phy supply vbus-boost not found, using dummy regulator [ 2.399383] exynos5_usb3drd_phy 12500000.phy: 12500000.phy supply vbus not found, using dummy regulator [ 2.399832] exynos5_usb3drd_phy 12500000.phy: 12500000.phy supply vbus-boost not found, using dummy regulator [ 2.420421] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-241330 [ 2.420523] dma-pl330 121a0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 2.429098] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-241330 [ 2.429197] dma-pl330 121b0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 2.432041] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-241330 [ 2.432140] dma-pl330 10800000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 [ 2.640078] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 2.645874] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 58, base_baud = 0) is a S3C6400/10 [ 2.647306] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 59, base_baud = 0) is a S3C6400/10 [ 2.648525] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 60, base_baud = 0) is a S3C6400/10 [ 3.521755] printk: console [ttySAC2] enabled [ 3.526758] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 61, base_baud = 0) is a S3C6400/10 [ 3.537707] exynos-trng 10830600.rng: Exynos True Random Number Generator. [ 3.546245] exynos-mixer 14450000.mixer: Adding to iommu group 0 [ 3.596307] brd: module loaded [ 3.637623] loop: module loaded [ 3.643004] libphy: Fixed MDIO Bus: probed [ 3.646454] usbcore: registered new interface driver r8152 [ 3.651375] usbcore: registered new interface driver asix [ 3.656623] usbcore: registered new interface driver ax88179_178a [ 3.662750] usbcore: registered new interface driver cdc_ether [ 3.668534] usbcore: registered new interface driver smsc75xx [ 3.674330] usbcore: registered new interface driver smsc95xx [ 3.679988] usbcore: registered new interface driver net1080 [ 3.685559] usbcore: registered new interface driver cdc_subset [ 3.691521] usbcore: registered new interface driver zaurus [ 3.697077] usbcore: registered new interface driver cdc_ncm [ 3.706355] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.711587] ehci-exynos: EHCI EXYNOS driver [ 3.716689] exynos-ehci 12110000.usb: EHCI Host Controller [ 3.721538] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 [ 3.729679] exynos-ehci 12110000.usb: irq 78, io mem 0x12110000 [ 3.759704] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 [ 3.765621] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02 [ 3.772655] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.779831] usb usb1: Product: EHCI Host Controller [ 3.784579] usb usb1: Manufacturer: Linux 5.2.0-rc6-next-20190626-xu4ml ehci_hcd [ 3.792035] usb usb1: SerialNumber: 12110000.usb [ 3.799493] hub 1-0:1.0: USB hub found [ 3.802134] hub 1-0:1.0: 3 ports detected [ 3.809447] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.814336] ohci-exynos: OHCI EXYNOS driver [ 3.818815] exynos-ohci 12120000.usb: USB Host Controller [ 3.823853] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2 [ 3.831853] exynos-ohci 12120000.usb: irq 78, io mem 0x12120000 [ 3.904373] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.02 [ 3.913713] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.919626] usb usb2: Product: USB Host Controller [ 3.924282] usb usb2: Manufacturer: Linux 5.2.0-rc6-next-20190626-xu4ml ohci_hcd [ 3.931739] usb usb2: SerialNumber: 12120000.usb [ 3.937925] hub 2-0:1.0: USB hub found [ 3.940547] hub 2-0:1.0: 3 ports detected [ 3.947789] usbcore: registered new interface driver uas [ 3.951948] usbcore: registered new interface driver usb-storage [ 3.959302] udc-core: couldn't find an available UDC - added [g_ether] to list of pending drivers [ 3.972255] i2c /dev entries driver [ 4.009387] vdd_ldo9: Bringing 3300000uV into 3000000-3000000uV [ 4.030576] vddq_mmc2: Bringing 3300000uV into 2800000-2800000uV [ 4.056840] vdd_sd: Bringing 3300000uV into 2800000-2800000uV [ 4.163254] s5m-rtc s2mps14-rtc: registered as rtc0 [ 4.167949] s2mps11-clk s2mps11-clk: DMA mask not set [ 4.185330] exynos-tmu 10060000.tmu: More trip points than supported by this TMU. [ 4.191518] exynos-tmu 10060000.tmu: 2 trip points should be configured in polling mode. [ 4.201259] exynos-tmu 10064000.tmu: More trip points than supported by this TMU. [ 4.207352] exynos-tmu 10064000.tmu: 2 trip points should be configured in polling mode. [ 4.217154] exynos-tmu 10068000.tmu: More trip points than supported by this TMU. [ 4.223337] exynos-tmu 10068000.tmu: 2 trip points should be configured in polling mode. [ 4.233073] exynos-tmu 1006c000.tmu: More trip points than supported by this TMU. [ 4.239168] exynos-tmu 1006c000.tmu: 2 trip points should be configured in polling mode. [ 4.251900] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled [ 4.260761] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com [ 4.313406] sdhci: Secure Digital Host Controller Interface driver [ 4.318132] sdhci: Copyright(c) Pierre Ossman [ 4.322851] Synopsys Designware Multimedia Card Interface Driver [ 4.329563] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. [ 4.335439] dwmmc_exynos 12200000.mmc: Using internal DMA controller. [ 4.341757] dwmmc_exynos 12200000.mmc: Version ID is 250a [ 4.347136] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 80,64 bit host data width,64 deep fifo [ 4.357089] dwmmc_exynos 12200000.mmc: allocated mmc-pwrseq [ 4.383454] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 4.406481] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. [ 4.413790] dwmmc_exynos 12220000.mmc: Using internal DMA controller. [ 4.418832] dwmmc_exynos 12220000.mmc: Version ID is 250a [ 4.424415] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 81,64 bit host data width,64 deep fifo [ 4.459845] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 4.537014] s5p-secss 10830000.sss: s5p-sss driver registered [ 4.541511] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 4.553006] usbcore: registered new interface driver usbhid [ 4.554453] mmc1: new ultra high speed DDR50 SDHC card at address 0001 [ 4.557151] usbhid: USB HID core driver [ 4.567831] mmcblk1: mmc1:0001 00000 29.8 GiB [ 4.578968] mmcblk1: p1 [ 4.599650] exynos-nocp: new NoC Probe device registered: 10ca1000.nocp [ 4.605179] exynos-nocp: new NoC Probe device registered: 10ca1400.nocp [ 4.611937] exynos-nocp: new NoC Probe device registered: 10ca1800.nocp [ 4.618307] exynos-nocp: new NoC Probe device registered: 10ca1c00.nocp [ 4.640199] NET: Registered protocol family 10 [ 4.645350] Segment Routing with IPv6 [ 4.647631] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 4.655978] NET: Registered protocol family 17 [ 4.659086] NET: Registered protocol family 15 [ 4.663725] Key type dns_resolver registered [ 4.668467] Registering SWP/SWPB emulation handler [ 4.674568] Loading compiled-in X.509 certificates [ 4.760676] OF: graph: no port node found in /soc/hdmi@14530000 [ 4.769019] [drm] Exynos DRM: using 14450000.mixer device for DMA mapping operations [ 4.775660] exynos-drm exynos-drm: bound 14450000.mixer (ops mixer_component_ops) [ 4.783010] exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_component_ops) [ 4.790125] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 4.796663] [drm] No driver support for vblank timestamp query. [ 4.803161] [drm] Cannot find any crtc or sizes [ 4.808733] [drm] Cannot find any crtc or sizes [ 4.812989] [drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 0 [ 4.821592] dwc3 12000000.dwc3: Failed to get clk 'ref': -2 [ 4.827131] xhci-hcd exynos5-dwc3-xhci.4.auto: xHCI Host Controller [ 4.832116] xhci-hcd exynos5-dwc3-xhci.4.auto: new USB bus registered, assigned bus number 3 [ 4.841043] xhci-hcd exynos5-dwc3-xhci.4.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010090 [ 4.850660] xhci-hcd exynos5-dwc3-xhci.4.auto: irq 153, io mem 0x12000000 [ 4.858172] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02 [ 4.865551] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.872733] usb usb3: Product: xHCI Host Controller [ 4.877529] usb usb3: Manufacturer: Linux 5.2.0-rc6-next-20190626-xu4ml xhci-hcd [ 4.884944] usb usb3: SerialNumber: exynos5-dwc3-xhci.4.auto [ 4.891667] hub 3-0:1.0: USB hub found [ 4.894418] hub 3-0:1.0: 1 port detected [ 4.898914] xhci-hcd exynos5-dwc3-xhci.4.auto: xHCI Host Controller [ 4.904466] xhci-hcd exynos5-dwc3-xhci.4.auto: new USB bus registered, assigned bus number 4 [ 4.912909] xhci-hcd exynos5-dwc3-xhci.4.auto: Host supports USB 3.0 SuperSpeed [ 4.920366] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.928421] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.02 [ 4.936429] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.943608] usb usb4: Product: xHCI Host Controller [ 4.948412] usb usb4: Manufacturer: Linux 5.2.0-rc6-next-20190626-xu4ml xhci-hcd [ 4.955823] usb usb4: SerialNumber: exynos5-dwc3-xhci.4.auto [ 4.962447] hub 4-0:1.0: USB hub found [ 4.965187] hub 4-0:1.0: 1 port detected [ 4.972602] dwc3 12400000.dwc3: Failed to get clk 'ref': -2 [ 4.977507] xhci-hcd exynos5-dwc3-xhci.5.auto: xHCI Host Controller [ 4.983037] xhci-hcd exynos5-dwc3-xhci.5.auto: new USB bus registered, assigned bus number 5 [ 4.991938] xhci-hcd exynos5-dwc3-xhci.5.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010090 [ 5.001658] xhci-hcd exynos5-dwc3-xhci.5.auto: irq 154, io mem 0x12400000 [ 5.009038] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02 [ 5.016543] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.023725] usb usb5: Product: xHCI Host Controller [ 5.028533] usb usb5: Manufacturer: Linux 5.2.0-rc6-next-20190626-xu4ml xhci-hcd [ 5.035948] usb usb5: SerialNumber: exynos5-dwc3-xhci.5.auto [ 5.042589] hub 5-0:1.0: USB hub found [ 5.045314] hub 5-0:1.0: 1 port detected [ 5.049812] xhci-hcd exynos5-dwc3-xhci.5.auto: xHCI Host Controller [ 5.055418] xhci-hcd exynos5-dwc3-xhci.5.auto: new USB bus registered, assigned bus number 6 [ 5.064099] xhci-hcd exynos5-dwc3-xhci.5.auto: Host supports USB 3.0 SuperSpeed [ 5.071279] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [ 5.079429] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.02 [ 5.087432] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.094616] usb usb6: Product: xHCI Host Controller [ 5.099416] usb usb6: Manufacturer: Linux 5.2.0-rc6-next-20190626-xu4ml xhci-hcd [ 5.106827] usb usb6: SerialNumber: exynos5-dwc3-xhci.5.auto [ 5.113397] hub 6-0:1.0: USB hub found [ 5.116188] hub 6-0:1.0: 1 port detected [ 5.122540] s3c-rtc 101e0000.rtc: registered as rtc1 [ 5.129926] exynos-bus: new bus device registered: soc:bus_wcore ( 84000 KHz ~ 400000 KHz) [ 5.138156] exynos-bus: new bus device registered: soc:bus_noc ( 67000 KHz ~ 100000 KHz) [ 5.145814] exynos-bus: new bus device registered: soc:bus_fsys_apb (100000 KHz ~ 200000 KHz) [ 5.154086] exynos-bus: new bus device registered: soc:bus_fsys (100000 KHz ~ 200000 KHz) [ 5.162633] exynos-bus: new bus device registered: soc:bus_fsys2 ( 75000 KHz ~ 150000 KHz) [ 5.171159] exynos-bus: new bus device registered: soc:bus_mfc ( 96000 KHz ~ 333000 KHz) [ 5.179118] exynos-bus: new bus device registered: soc:bus_gen ( 89000 KHz ~ 267000 KHz) [ 5.186718] exynos-bus: new bus device registered: soc:bus_peri ( 67000 KHz ~ 67000 KHz) [ 5.195633] exynos-bus: new bus device registered: soc:bus_g2d ( 84000 KHz ~ 333000 KHz) [ 5.203664] exynos-bus: new bus device registered: soc:bus_g2d_acp ( 67000 KHz ~ 267000 KHz) [ 5.212056] exynos-bus: new bus device registered: soc:bus_jpeg ( 75000 KHz ~ 300000 KHz) [ 5.220206] exynos-bus: new bus device registered: soc:bus_jpeg_apb ( 84000 KHz ~ 167000 KHz) [ 5.228323] exynos-bus: new bus device registered: soc:bus_disp1_fimd (120000 KHz ~ 200000 KHz) [ 5.237202] exynos-bus: new bus device registered: soc:bus_disp1 (120000 KHz ~ 300000 KHz) [ 5.245401] exynos-bus: new bus device registered: soc:bus_gscl_scaler (150000 KHz ~ 300000 KHz) [ 5.254506] exynos-bus: new bus device registered: soc:bus_mscl ( 84000 KHz ~ 400000 KHz) [ 5.267624] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 5.278310] s5m-rtc s2mps14-rtc: setting system clock to 2019-06-28T10:41:37 UTC (1561718497) [ 5.285704] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 5.325271] cfg80211: Problem loading in-kernel X.509 certificate (-13) [ 5.331220] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 5.339103] cfg80211: failed to load regulatory.db [ 5.386977] ALSA device list: [ 5.388858] No soundcards found. [ 5.397612] Freeing unused kernel memory: 1024K [ 5.410174] usb 4-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd [ 5.441108] Run /init as init process [ 5.452069] usb 4-1: New USB device found, idVendor=05e3, idProduct=0616, bcdDevice=22.23 [ 5.459945] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.466648] usb 4-1: Product: USB3.0 Hub [ 5.470194] usb 4-1: Manufacturer: GenesysLogic [ 5.497606] hub 4-1:1.0: USB hub found [ 5.500661] hub 4-1:1.0: 2 ports detected :: running early hook [udev] Warning: /lib/modules/5.2.0-rc6-next-20190626-xu4ml/modules.devname not found - ignoring [ 5.599678] usb 3-1: new high-speed USB device number 2 using xhci-hcd Starting version 242.29-3-arch :: running hook [udev] :: Triggering uevents... [ 5.794111] usb 3-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=22.23 [ 5.800899] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.807945] usb 3-1: Product: USB2.0 Hub [ 5.811912] usb 3-1: Manufacturer: GenesysLogic [ 5.881067] hub 3-1:1.0: USB hub found [ 5.885093] hub 3-1:1.0: 2 ports detected [ 5.935737] dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-241330 [ 5.942471] dma-pl330 3880000.adma: DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6 [ 5.950931] samsung-i2s 3830000.i2s-sec: DMA channels sourced from device 3830000.i2s [ 5.969722] dma-pl330 3880000.adma: PM domain MAU will not be powered off [ 5.978492] odroid-audio sound: snd-soc-dummy-dai <-> samsung-i2s mapping ok [ 5.984471] odroid-audio sound: i2s-hifi <-> snd-soc-dummy-dai mapping ok [ 5.991881] odroid-audio sound: snd-soc-dummy-dai <-> samsung-i2s-sec mapping ok [ 7.019896] usb 4-1.1: new SuperSpeed Gen 1 USB device number 3 using xhci-hcd [ 7.063032] usb 4-1.1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice=63.01 [ 7.070484] usb 4-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.077438] usb 4-1.1: Product: JMS567 [ 7.081749] usb 4-1.1: Manufacturer: JMicron [ 7.086028] usb 4-1.1: SerialNumber: DB12345678A3 [ 7.151572] scsi host0: uas [ 7.162765] scsi 0:0:0:0: Direct-Access KINGSTON SA400S37120G 6301 PQ: 0 ANSI: 6 [ 7.176231] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB) [ 7.177550] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 7.183547] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 7.201150] sd 0:0:0:0: [sda] Write Protect is off [ 7.204977] sd 0:0:0:0: [sda] Disabling FUA [ 7.209476] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7.219411] sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes) [ 7.713603] sda: sda1 [ 7.736338] sd 0:0:0:0: [sda] Attached SCSI disk [ 11.372630] xhci-hcd exynos5-dwc3-xhci.5.auto: Timeout while waiting for setup device command [ 16.650624] xhci-hcd exynos5-dwc3-xhci.5.auto: Timeout while waiting for setup device command [ 16.870255] usb 6-1: device not accepting address 2, error -62 [ 22.171093] xhci-hcd exynos5-dwc3-xhci.5.auto: Timeout while waiting for setup device command [ 27.451021] xhci-hcd exynos5-dwc3-xhci.5.auto: Timeout while waiting for setup device command [ 27.669956] usb 6-1: device not accepting address 3, error -62 [ 27.711656] usb usb6-port1: attempt power cycle [ 28.561364] random: crng init done :: performing fsck on '/dev/mmcblk1p1' /dev/mmcblk1p1: clean, 98434/1954064 files, 1648388/7814656 blocks :: mounting '/dev/mmcblk1p1' on real root [ 30.319068] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null) :: running cleanup hook [udev] [ 31.097974] systemd[1]: systemd 242.29-3-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 31.123657] systemd[1]: Detected architecture arm. Welcome to Arch Linux ARM! [ 31.173780] systemd[1]: Set hostname to <archl-xu4m>. [ 31.201446] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument [ 31.596864] systemd[1]: File /usr/lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 31.612957] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 31.899962] systemd[1]: Reached target Swap. [ OK ] Reached target Swap. [ 31.936150] systemd[1]: Listening on LVM2 poll daemon socket. [ OK ] Listening on LVM2 poll daemon socket. [ 31.981882] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password ?ts to Console Directory Watch. [ 32.077378] systemd[1]: Listening on Process Core Dump Socket. [ OK ] Listening on Process Core Dump Socket. [ OK ] Listening on Journal Socket. Mounting Temporary Directory (/tmp)... [ OK ] Listening on udev Control Socket. [ OK ] Reached target Remote File Systems. Starting Apply Kernel Variables... [ OK ] Listening on Journal Socket (/dev/log). [ OK ] Listening on initctl Compatibility Named Pipe. [ OK ] Created slice system-getty.slice. [ OK ] Created slice User and Session Slice. [ OK ] Reached target Slices. Starting Create list of re?odes for the current kernel... Mounting Kernel Debug File System... [ OK ] Listening on Network Service Netlink Socket. [ OK ] Started Forward Password R?uests to Wall Directory Watch. [ OK ] Reached target Paths. [ OK ] Reached target Local Encrypted Volumes. [ OK ] Listening on udev Kernel Socket. [ OK ] Listening on Device-mapper event daemon FIFOs. Starting Journal Service... Starting udev Coldplug all Devices... [ OK ] Listening on LVM2 metadata daemon socket. Starting Monitoring of LVM?meventd or progress polling... Mounting Kernel Configuration File System... [ OK ] Created slice system-serial\x2dgetty.slice. Starting Remount Root and Kernel File Systems... [ OK ] Mounted Temporary Directory (/tmp). [ OK ] Started Apply Kernel Variables. [ OK ] Started Create list of req? nodes for the current kernel. [ OK ] Mounted Kernel Debug File System. [ OK ] Mounted Kernel Configuration File System. [ OK ] Started Remount Root and Kernel File Systems. [ OK ] Started Journal Service. [ OK ] Started LVM2 metadata daemon. Starting Load/Save Random Seed... Starting Flush Journal to Persistent Storage... Starting Create Static Device Nodes in /dev... [ OK ] Started Load/Save Random Seed. [ 33.578276] systemd-journald[218]: Received request to flush runtime journal from PID 1 [ OK ] Started Create Static Device Nodes in /dev. Starting udev Kernel Device Manager... [ OK ] Started udev Kernel Device Manager. Starting Network Service... [ OK ] Started udev Coldplug all Devices. [ OK ] Started Flush Journal to Persistent Storage. [ 34.513977] mc: Linux media interface: v0.10 [ OK ] Started Network Service. [ 34.585792] videodev: Linux video capture interface: v2.00 [ OK ] Found device /dev/ttySAC2. [ 34.721191] s5p-jpeg 11f50000.jpeg: Adding to iommu group 1 [ 34.726553] s5p-jpeg 11f50000.jpeg: encoder device registered as /dev/video0 [ 34.741259] s5p-jpeg 11f50000.jpeg: decoder device registered as /dev/video1 [ 34.746984] s5p-jpeg 11f50000.jpeg: Samsung S5P JPEG codec [ 34.753851] s5p-jpeg 11f60000.jpeg: Adding to iommu group 2 [ 34.756850] exynos-gsc 13e00000.video-scaler: Adding to iommu group 3 [ 34.768127] s5p-jpeg 11f60000.jpeg: encoder device registered as /dev/video2 [ 34.769673] exynos-gsc 13e10000.video-scaler: Adding to iommu group 4 [ 34.774710] s5p-jpeg 11f60000.jpeg: decoder device registered as /dev/video4 [ 34.787775] s5p-jpeg 11f60000.jpeg: Samsung S5P JPEG codec [ 34.834252] s5p-mfc 11000000.codec: Adding to iommu group 5 [ 34.849297] s5p-mfc 11000000.codec: preallocated 8 MiB buffer for the firmware and context buffers [ 34.902287] s5p-mfc 11000000.codec: decoder registered as /dev/video6 [ 34.908365] s5p-mfc 11000000.codec: encoder registered as /dev/video7 [ OK ] Started Monitoring of LVM2? dmeventd or progress polling. [ OK ] Reached target Local File Systems (Pre). [ OK ] Reached target Local File Systems. [ OK ] Reached target Sound Card. Starting Create Volatile Files and Directories... [ OK ] Started Create Volatile Files and Directories. Starting Network Time Synchronization... Starting Update UTMP about System Boot/Shutdown... Starting Network Name Resolution... Starting Entropy Harvesting Daemon... [ OK ] Started Entropy Harvesting Daemon. [ OK ] Started Network Time Synchronization. [ OK ] Reached target System Time Set. [ OK ] Reached target System Time Synchronized. [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Reached target System Initialization. [ OK ] Started Daily man-db regeneration. [ OK ] Started Daily rotation of log files. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting Apply cpupower configuration... Starting Login Service... [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Started D-Bus System Message Bus. [ OK ] Started Daily verification of password and group files. [ OK ] Reached target Timers. [ OK ] Started Network Name Resolution. [ OK ] Started Apply cpupower configuration. [ OK ] Reached target Host and Network Name Lookups. [ OK ] Reached target Network. [ OK ] Started OpenSSH Daemon. Starting Permit User Sessions... [ OK ] Started Permit User Sessions. [ OK ] Started Serial Getty on ttySAC2. [ OK ] Started Getty on tty1. [ OK ] Reached target Login Prompts. [ OK ] Started Login Service. [ OK ] Reached target Multi-User System. [ OK ] Reached target Graphical Interface. Arch Linux 5.2.0-rc6-next-20190626-xu4ml (ttySAC2) archl-xu4m login: root Password: Last login: Fri Jun 28 10:41:14 on ttySAC2 [root@archl-xu4m ~]# lsusb -t /: Bus 06.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M /: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 480M /: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/2p, 5000M |__ Port 1: Dev 3, If 0, Class=Mass Storage, Driver=uas, 5000M /: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 480M |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/2p, 480M /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=exynos-ohci/3p, 12M /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=exynos-ehci/3p, 480M [root@archl-xu4m ~]# [root@archl-xu4m ~]# [root@archl-xu4m ~]#
Optional Paste Settings
Syntax Highlighting:
None
Bash
C
C#
C++
CSS
HTML
JSON
Java
JavaScript
Lua
Markdown (PRO members only)
Objective C
PHP
Perl
Python
Ruby
Swift
4CS
6502 ACME Cross Assembler
6502 Kick Assembler
6502 TASM/64TASS
ABAP
AIMMS
ALGOL 68
APT Sources
ARM
ASM (NASM)
ASP
ActionScript
ActionScript 3
Ada
Apache Log
AppleScript
Arduino
Asymptote
AutoIt
Autohotkey
Avisynth
Awk
BASCOM AVR
BNF
BOO
Bash
Basic4GL
Batch
BibTeX
Blitz Basic
Blitz3D
BlitzMax
BrainFuck
C
C (WinAPI)
C Intermediate Language
C for Macs
C#
C++
C++ (WinAPI)
C++ (with Qt extensions)
C: Loadrunner
CAD DCL
CAD Lisp
CFDG
CMake
COBOL
CSS
Ceylon
ChaiScript
Chapel
Clojure
Clone C
Clone C++
CoffeeScript
ColdFusion
Cuesheet
D
DCL
DCPU-16
DCS
DIV
DOT
Dart
Delphi
Delphi Prism (Oxygene)
Diff
E
ECMAScript
EPC
Easytrieve
Eiffel
Email
Erlang
Euphoria
F#
FO Language
Falcon
Filemaker
Formula One
Fortran
FreeBasic
FreeSWITCH
GAMBAS
GDB
GDScript
Game Maker
Genero
Genie
GetText
Go
Godot GLSL
Groovy
GwBasic
HQ9 Plus
HTML
HTML 5
Haskell
Haxe
HicEst
IDL
INI file
INTERCAL
IO
ISPF Panel Definition
Icon
Inno Script
J
JCL
JSON
Java
Java 5
JavaScript
Julia
KSP (Kontakt Script)
KiXtart
Kotlin
LDIF
LLVM
LOL Code
LScript
Latex
Liberty BASIC
Linden Scripting
Lisp
Loco Basic
Logtalk
Lotus Formulas
Lotus Script
Lua
M68000 Assembler
MIX Assembler
MK-61/52
MPASM
MXML
MagikSF
Make
MapBasic
Markdown (PRO members only)
MatLab
Mercury
MetaPost
Modula 2
Modula 3
Motorola 68000 HiSoft Dev
MySQL
Nagios
NetRexx
Nginx
Nim
NullSoft Installer
OCaml
OCaml Brief
Oberon 2
Objeck Programming Langua
Objective C
Octave
Open Object Rexx
OpenBSD PACKET FILTER
OpenGL Shading
Openoffice BASIC
Oracle 11
Oracle 8
Oz
PARI/GP
PCRE
PHP
PHP Brief
PL/I
PL/SQL
POV-Ray
ParaSail
Pascal
Pawn
Per
Perl
Perl 6
Phix
Pic 16
Pike
Pixel Bender
PostScript
PostgreSQL
PowerBuilder
PowerShell
ProFTPd
Progress
Prolog
Properties
ProvideX
Puppet
PureBasic
PyCon
Python
Python for S60
QBasic
QML
R
RBScript
REBOL
REG
RPM Spec
Racket
Rails
Rexx
Robots
Roff Manpage
Ruby
Ruby Gnuplot
Rust
SAS
SCL
SPARK
SPARQL
SQF
SQL
SSH Config
Scala
Scheme
Scilab
SdlBasic
Smalltalk
Smarty
StandardML
StoneScript
SuperCollider
Swift
SystemVerilog
T-SQL
TCL
TeXgraph
Tera Term
TypeScript
TypoScript
UPC
Unicon
UnrealScript
Urbi
VB.NET
VBScript
VHDL
VIM
Vala
Vedit
VeriLog
Visual Pro Log
VisualBasic
VisualFoxPro
WHOIS
WhiteSpace
Winbatch
XBasic
XML
XPP
Xojo
Xorg Config
YAML
YARA
Z80 Assembler
ZXBasic
autoconf
jQuery
mIRC
newLISP
q/kdb+
thinBasic
Paste Expiration:
Never
Burn after read
10 Minutes
1 Hour
1 Day
1 Week
2 Weeks
1 Month
6 Months
1 Year
Paste Exposure:
Public
Unlisted
Private
Folder:
(members only)
Password
NEW
Enabled
Disabled
Burn after read
NEW
Paste Name / Title:
Create New Paste
Hello
Guest
Sign Up
or
Login
Sign in with Facebook
Sign in with Twitter
Sign in with Google
You are currently not logged in, this means you can not edit or delete anything you paste.
Sign Up
or
Login
Public Pastes
Untitled
PHP | 7 min ago
Untitled
C++ | 35 min ago
Untitled
JavaScript | 36 min ago
Stalin Sort Drill
Julia | 44 min ago
Febona
JavaScript | 55 min ago
Untitled
Lua | 1 hour ago
Untitled
JSON | 1 hour ago
My Log File
HTML 5 | 2 hours ago
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the
Cookies Policy
.
OK, I Understand
Not a member of Pastebin yet?
Sign Up
, it unlocks many cool features!
