xenonhelix

Rock 3a Armbian Boot Logs

Nov 24th, 2021
16
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. DDR Version V1.10 20210810
  2. In
  3. ddrconfig:7
  4. LPDDR4X, 324MHz
  5. BW=32 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=4096MB
  6. tdqss: cs0 dqs0: 24ps, dqs1: -72ps, dqs2: -48ps, dqs3: -120ps,
  7. tdqss: cs1 dqs0: 24ps, dqs1: -96ps, dqs2: -48ps, dqs3: -120ps,
  8.  
  9. change to: 324MHz
  10. PHY drv:clk:36,ca:36,DQ:29,odt:60
  11. vrefinner:16%, vrefout:41%
  12. dram drv:40,odt:0
  13. clk skew:0x61
  14.  
  15. change to: 528MHz
  16. PHY drv:clk:36,ca:36,DQ:29,odt:60
  17. vrefinner:16%, vrefout:41%
  18. dram drv:40,odt:0
  19. clk skew:0x58
  20.  
  21. change to: 780MHz
  22. PHY drv:clk:36,ca:36,DQ:29,odt:60
  23. vrefinner:16%, vrefout:41%
  24. dram drv:40,odt:0
  25. clk skew:0x58
  26.  
  27. change to: 1056MHz(final freq)
  28. PHY drv:clk:36,ca:36,DQ:29,odt:60
  29. vrefinner:16%, vrefout:22%
  30. dram drv:40,odt:80
  31. vref_ca:00000071
  32. clk skew:0x2f
  33. cs 0:
  34. the read training result:
  35. DQS0:0x3d, DQS1:0x3c, DQS2:0x40, DQS3:0x3a,
  36. min : 0xc 0xc 0xd 0xc 0x1 0x4 0x7 0x4 , 0x8 0x6 0x1 0x1 0x9 0x7 0x9 0x5 ,
  37. 0xf 0xf 0xa 0x9 0x3 0x1 0x2 0x5 , 0x9 0x6 0x4 0x1 0xa 0xb 0x8 0xb ,
  38. mid :0x2a 0x2a 0x2b 0x29 0x1f 0x22 0x24 0x22 ,0x26 0x24 0x1e 0x20 0x27 0x26 0x27 0x24 ,
  39. 0x2d 0x2d 0x28 0x27 0x22 0x20 0x21 0x23 ,0x27 0x25 0x22 0x20 0x29 0x29 0x27 0x29 ,
  40. max :0x48 0x49 0x4a 0x47 0x3e 0x41 0x42 0x40 ,0x44 0x43 0x3c 0x3f 0x45 0x45 0x45 0x43 ,
  41. 0x4c 0x4c 0x46 0x46 0x42 0x40 0x40 0x41 ,0x46 0x44 0x41 0x3f 0x48 0x48 0x46 0x48 ,
  42. range:0x3c 0x3d 0x3d 0x3b 0x3d 0x3d 0x3b 0x3c ,0x3c 0x3d 0x3b 0x3e 0x3c 0x3e 0x3c 0x3e ,
  43. 0x3d 0x3d 0x3c 0x3d 0x3f 0x3f 0x3e 0x3c ,0x3d 0x3e 0x3d 0x3e 0x3e 0x3d 0x3e 0x3d ,
  44. the write training result:
  45. DQS0:0x32, DQS1:0x26, DQS2:0x29, DQS3:0x1f,
  46. min :0x5c 0x5e 0x5e 0x5d 0x54 0x56 0x57 0x59 0x5a ,0x4e 0x4e 0x4a 0x49 0x51 0x4e 0x50 0x4f 0x4d ,
  47. 0x51 0x50 0x4d 0x4d 0x46 0x44 0x45 0x4a 0x4c ,0x47 0x47 0x46 0x44 0x4b 0x4b 0x48 0x4d 0x46 ,
  48. mid :0x78 0x79 0x7b 0x79 0x6f 0x71 0x72 0x74 0x74 ,0x6a 0x69 0x63 0x64 0x6d 0x69 0x6b 0x6a 0x68 ,
  49. 0x6d 0x6c 0x68 0x68 0x61 0x5e 0x60 0x65 0x68 ,0x62 0x62 0x5f 0x5e 0x67 0x67 0x62 0x68 0x60 ,
  50. max :0x94 0x95 0x98 0x95 0x8b 0x8c 0x8e 0x8f 0x8f ,0x87 0x84 0x7d 0x80 0x89 0x85 0x86 0x85 0x84 ,
  51. 0x8a 0x89 0x83 0x83 0x7c 0x79 0x7b 0x80 0x84 ,0x7d 0x7d 0x79 0x79 0x84 0x83 0x7c 0x84 0x7a ,
  52. range:0x38 0x37 0x3a 0x38 0x37 0x36 0x37 0x36 0x35 ,0x39 0x36 0x33 0x37 0x38 0x37 0x36 0x36 0x37 ,
  53. 0x39 0x39 0x36 0x36 0x36 0x35 0x36 0x36 0x38 ,0x36 0x36 0x33 0x35 0x39 0x38 0x34 0x37 0x34 ,
  54. cs 1:
  55. the read training result:
  56. DQS0:0x3c, DQS1:0x3b, DQS2:0x40, DQS3:0x39,
  57. min : 0xb 0xc 0xd 0xa 0x2 0x5 0x8 0x5 , 0x8 0x6 0x1 0x1 0xa 0x8 0xa 0x6 ,
  58. 0xf 0xf 0xb 0xa 0x3 0x1 0x3 0x6 , 0x8 0x5 0x4 0x1 0x9 0x9 0x8 0xa ,
  59. mid :0x27 0x29 0x2b 0x28 0x1f 0x22 0x23 0x21 ,0x24 0x23 0x1d 0x1e 0x26 0x25 0x26 0x24 ,
  60. 0x2d 0x2d 0x28 0x28 0x22 0x20 0x21 0x23 ,0x26 0x24 0x22 0x20 0x27 0x28 0x26 0x29 ,
  61. max :0x44 0x47 0x49 0x46 0x3c 0x40 0x3f 0x3e ,0x41 0x40 0x3a 0x3c 0x43 0x43 0x43 0x42 ,
  62. 0x4c 0x4c 0x46 0x46 0x41 0x40 0x40 0x41 ,0x45 0x44 0x40 0x3f 0x46 0x47 0x45 0x48 ,
  63. range:0x39 0x3b 0x3c 0x3c 0x3a 0x3b 0x37 0x39 ,0x39 0x3a 0x39 0x3b 0x39 0x3b 0x39 0x3c ,
  64. 0x3d 0x3d 0x3b 0x3c 0x3e 0x3f 0x3d 0x3b ,0x3d 0x3f 0x3c 0x3e 0x3d 0x3e 0x3d 0x3e ,
  65. the write training result:
  66. DQS0:0x32, DQS1:0x26, DQS2:0x29, DQS3:0x1f,
  67. min :0x54 0x56 0x57 0x56 0x4d 0x50 0x51 0x51 0x51 ,0x45 0x43 0x3e 0x3f 0x47 0x47 0x47 0x47 0x43 ,
  68. 0x4f 0x4f 0x4c 0x4a 0x46 0x44 0x43 0x49 0x4a ,0x47 0x47 0x46 0x44 0x4b 0x4b 0x48 0x4c 0x47 ,
  69. mid :0x71 0x72 0x73 0x72 0x68 0x6b 0x6c 0x6c 0x6c ,0x60 0x5d 0x58 0x5a 0x63 0x60 0x61 0x60 0x5d ,
  70. 0x6b 0x6b 0x67 0x66 0x60 0x5d 0x5e 0x63 0x65 ,0x63 0x61 0x5f 0x5e 0x67 0x67 0x62 0x67 0x61 ,
  71. max :0x8e 0x8e 0x90 0x8e 0x84 0x87 0x88 0x87 0x88 ,0x7c 0x78 0x73 0x76 0x80 0x7a 0x7c 0x79 0x78 ,
  72. 0x88 0x88 0x82 0x83 0x7b 0x77 0x7a 0x7d 0x81 ,0x80 0x7b 0x79 0x79 0x83 0x83 0x7d 0x82 0x7c ,
  73. range:0x3a 0x38 0x39 0x38 0x37 0x37 0x37 0x36 0x37 ,0x37 0x35 0x35 0x37 0x39 0x33 0x35 0x32 0x35 ,
  74. 0x39 0x39 0x36 0x39 0x35 0x33 0x37 0x34 0x37 ,0x39 0x34 0x33 0x35 0x38 0x38 0x35 0x36 0x35 ,
  75. CA Training result:
  76. cs:0 min :0x44 0x40 0x3d 0x36 0x3e 0x36 0x3d ,0x42 0x3b 0x3a 0x33 0x3a 0x31 0x3d ,
  77. cs:0 mid :0x81 0x81 0x79 0x77 0x7a 0x77 0x6e ,0x7f 0x7d 0x77 0x74 0x76 0x73 0x6d ,
  78. cs:0 max :0xbf 0xc3 0xb6 0xb9 0xb7 0xb8 0x9f ,0xbc 0xbf 0xb4 0xb6 0xb3 0xb6 0x9e ,
  79. cs:0 range:0x7b 0x83 0x79 0x83 0x79 0x82 0x62 ,0x7a 0x84 0x7a 0x83 0x79 0x85 0x61 ,
  80. cs:1 min :0x40 0x42 0x39 0x39 0x3b 0x37 0x3c ,0x40 0x3f 0x37 0x38 0x37 0x35 0x3c ,
  81. cs:1 mid :0x80 0x80 0x79 0x77 0x7a 0x76 0x6f ,0x80 0x7e 0x78 0x76 0x77 0x74 0x6e ,
  82. cs:1 max :0xc0 0xbf 0xb9 0xb6 0xba 0xb5 0xa2 ,0xc0 0xbd 0xb9 0xb4 0xb7 0xb3 0xa0 ,
  83. cs:1 range:0x80 0x7d 0x80 0x7d 0x7f 0x7e 0x66 ,0x80 0x7e 0x82 0x7c 0x80 0x7e 0x64 ,
  84. out
  85. U-Boot SPL board init
  86. U-Boot SPL 2017.09-armbian (Nov 24 2021 - 09:32:02)
  87. unknown raw ID phN
  88. unrecognized JEDEC id bytes: 00, 00, 00
  89. Trying to boot from MMC2
  90. ## Verified-boot: 0
  91. ## Checking atf-1 0x00040000 ... sha256+ OK
  92. ## Checking uboot 0x00a00000 ... sha256+ OK
  93. ## Checking fdt 0x00b24098 ... sha256+ OK
  94. ## Checking atf-2 0x00068000 ... sha256+ OK
  95. ## Checking atf-3 0xfdcd0000 ... sha256+ OK
  96. ## Checking atf-4 0xfdcc9000 ... sha256+ OK
  97. ## Checking atf-5 0x00066000 ... sha256+ OK
  98. Jumping to U-Boot(0x00a00000) via ARM Trusted Firmware(0x00040000)
  99. Total: 220.507 ms
  100.  
  101. INFO: Preloader serial: 2
  102. NOTICE: BL31: v2.3():v2.3-167-g81e0b993a-dirty:xsf
  103. NOTICE: BL31: Built : 11:20:08, Sep 6 2021
  104. INFO: GICv3 without legacy support detected.
  105. INFO: ARM GICv3 driver initialized in EL3
  106. INFO: pmu v1 is valid
  107. INFO: dfs DDR fsp_param[0].freq_mhz= 1056MHz
  108. INFO: dfs DDR fsp_param[1].freq_mhz= 324MHz
  109. INFO: dfs DDR fsp_param[2].freq_mhz= 528MHz
  110. INFO: dfs DDR fsp_param[3].freq_mhz= 780MHz
  111. INFO: Using opteed sec cpu_context!
  112. INFO: boot cpu mask: 0
  113. INFO: BL31: Initializing runtime services
  114. WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK
  115. ERROR: Error initializing runtime service opteed_fast
  116. INFO: BL31: Preparing for EL3 exit to normal world
  117. INFO: Entry point address = 0xa00000
  118. INFO: SPSR = 0x3c9
  119.  
  120.  
  121. U-Boot 2017.09-armbian (Nov 24 2021 - 09:32:02 +0000)
  122.  
  123. Model: Radxa ROCK 3 Model A
  124. PreSerial: 2, raw, 0xfe660000
  125. DRAM: 4 GiB
  126. Sysmem: init
  127. Relocation Offset: ed354000, fdt: eb9f8d78
  128. Using default environment
  129.  
  130. no mmc device at slot 1
  131. dwmmc@fe2b0000: 1 (SD), dwmmc@fe2c0000: 2, sdhci@fe310000: 0
  132. Bootdev(atags): mmc 1
  133. MMC1: Legacy, 50Mhz
  134. PartType: DOS
  135. No misc partition
  136. boot mode: normal
  137. FIT: No boot partition
  138. No resource partition
  139. Failed to load DTB
  140. I2c0 speed: 100000Hz
  141. PMIC: RK8090 (on=0x40, off=0x00)
  142. vdd_logic init 900000 uV
  143. vdd_gpu init 900000 uV
  144. vdd_npu init 900000 uV
  145. io-domain: OK
  146. Could not find baseparameter partition
  147. Model: Radxa ROCK 3 Model A
  148. No resource partition
  149. No file: logo.bmp
  150. failed to display uboot logo
  151. CLK: (sync kernel. arm: enter 816000 KHz, init 816000 KHz, kernel 0N/A)
  152. apll 816000 KHz
  153. dpll 528000 KHz
  154. gpll 1188000 KHz
  155. cpll 1000000 KHz
  156. npll 1200000 KHz
  157. vpll 24000 KHz
  158. hpll 24000 KHz
  159. ppll 200000 KHz
  160. armclk 816000 KHz
  161. aclk_bus 150000 KHz
  162. pclk_bus 100000 KHz
  163. aclk_top_high 500000 KHz
  164. aclk_top_low 400000 KHz
  165. hclk_top 150000 KHz
  166. pclk_top 100000 KHz
  167. aclk_perimid 300000 KHz
  168. hclk_perimid 150000 KHz
  169. pclk_pmu 100000 KHz
  170. Net: eth1: ethernet@fe010000
  171. Hit key to stop autoboot('CTRL+C'): 0
  172. switch to partitions #0, OK
  173. mmc1 is current device
  174. Scanning mmc 1:1...
  175. Found U-Boot script /boot/boot.scr
  176. 3185 bytes read in 21 ms (147.5 KiB/s)
  177. ## Executing script at 00c00000
  178. Boot script loaded from mmc 1
  179. 254 bytes read in 19 ms (12.7 KiB/s)
  180. 6125256 bytes read in 543 ms (10.8 MiB/s)
  181. 22170112 bytes read in 1880 ms (11.2 MiB/s)
  182. 146874 bytes read in 97 ms (1.4 MiB/s)
  183. 1322 bytes read in 119 ms (10.7 KiB/s)
  184. Applying kernel provided DT fixup script (rk35xx-fixup.scr)
  185. ## Executing script at 09000000
  186. Fdt Ramdisk skip relocation
  187. ## Loading init Ramdisk from Legacy Image at 0a200000 ...
  188. Image Name: uInitrd
  189. Image Type: AArch64 Linux RAMDisk Image (gzip compressed)
  190. Data Size: 6125192 Bytes = 5.8 MiB
  191. Load Address: 00000000
  192. Entry Point: 00000000
  193. Verifying Checksum ... OK
  194. ## Flattened Device Tree blob at 0x0a100000
  195. Booting using the fdt blob at 0x0a100000
  196. reserving fdt memory region: addr=a100000 size=8a000
  197. 'reserved-memory' ramoops@110000: addr=110000 size=f0000
  198. Using Device Tree in place at 000000000a100000, end 000000000a18cfff
  199. No resource partition
  200. No file: logo_kernel.bmp
  201. Adding bank: 0x00200000 - 0xf0000000 (size: 0xefe00000)
  202. Adding bank: 0x1f0000000 - 0x200000000 (size: 0x10000000)
  203. Total: 3263.761 ms
  204.  
  205. Starting kernel ...
  206.  
  207. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
  208. [ 0.000000] Linux version 4.19.193 (root@ubuntu-h2) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)), GNU ld (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) 2.32.0.20190321) #trunk SMP Fri Nov 19 08:11:41 UTC 2021
  209. [ 0.000000] Machine model: Radxa ROCK 3 Model A
  210. [ 0.000000] debug: ignoring loglevel setting.
  211. [ 0.000000] efi: Getting EFI parameters from FDT:
  212. [ 0.000000] efi: UEFI not found.
  213. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'drm-logo@00000000': base 0x0000000000000000, size 0 MiB
  214. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'drm-cubic-lut@00000000': base 0x0000000000000000, size 0 MiB
  215. [ 0.000000] Reserved memory: created CMA memory pool at 0x00000001f8000000, size 128 MiB
  216. [ 0.000000] OF: reserved mem: initialized node rknpu, compatible id shared-dma-pool
  217. [ 0.000000] cma: Reserved 16 MiB at 0x00000000ef000000
  218. [ 0.000000] On node 0 totalpages: 1048064
  219. [ 0.000000] DMA32 zone: 15352 pages used for memmap
  220. [ 0.000000] DMA32 zone: 0 pages reserved
  221. [ 0.000000] DMA32 zone: 982528 pages, LIFO batch:63
  222. [ 0.000000] Normal zone: 1024 pages used for memmap
  223. [ 0.000000] Normal zone: 65536 pages, LIFO batch:15
  224. [ 0.000000] psci: probing for conduit method from DT.
  225. [ 0.000000] psci: PSCIv1.1 detected in firmware.
  226. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  227. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  228. [ 0.000000] psci: SMC Calling Convention v1.2
  229. [ 0.000000] percpu: Embedded 23 pages/cpu s54952 r8192 d31064 u94208
  230. [ 0.000000] pcpu-alloc: s54952 r8192 d31064 u94208 alloc=23*4096
  231. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  232. [ 0.000000] Detected VIPT I-cache on CPU0
  233. [ 0.000000] CPU features: detected: Virtualization Host Extensions
  234. [ 0.000000] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
  235. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1031688
  236. [ 0.000000] Kernel command line: root=UUID=0453f3be-700c-4859-a431-cc3d959e2eb4 rootwait rootfstype=ext4 console=ttyS2,1500000 consoleblank=0 loglevel=7 ubootpart=c236df51-01 usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u earlyprintk ignore_loglevel cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1
  237. [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
  238. [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
  239. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  240. [ 0.000000] software IO TLB: mapped [mem 0xeafff000-0xeefff000] (64MB)
  241. [ 0.000000] Memory: 3858740K/4192256K available (13308K kernel code, 2002K rwdata, 4684K rodata, 1600K init, 1789K bss, 186060K reserved, 147456K cma-reserved)
  242. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  243. [ 0.000000] ftrace: allocating 49167 entries in 193 pages
  244. [ 0.000000] rcu: Hierarchical RCU implementation.
  245. [ 0.000000] rcu: RCU event tracing is enabled.
  246. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
  247. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  248. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  249. [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
  250. [ 0.000000] GICv3: Distributor has no Range Selector support
  251. [ 0.000000] GICv3: no VLPI support, no direct LPI support
  252. [ 0.000000] ITS [mem 0xfd440000-0xfd45ffff]
  253. [ 0.000000] ITS@0x00000000fd440000: allocated 8192 Devices @ea810000 (indirect, esz 8, psz 64K, shr 0)
  254. [ 0.000000] ITS@0x00000000fd440000: allocated 32768 Interrupt Collections @ea820000 (flat, esz 2, psz 64K, shr 0)
  255. [ 0.000000] ITS: using cache flushing for cmd queue
  256. [ 0.000000] GIC: using LPI property table @0x00000000ea830000
  257. [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fd460000
  258. [ 0.000000] CPU0: using LPI pending table @0x00000000ea840000
  259. [ 0.000000] GIC: using cache flushing for LPI property table
  260. [ 0.000000] random: random: get_random_bytes called from start_kernel+0x35c/0x4e8 with crng_init=0
  261. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
  262. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  263. [ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  264. [ 0.001785] Console: colour dummy device 80x25
  265. [ 0.001841] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
  266. [ 0.001857] pid_max: default: 32768 minimum: 301
  267. [ 0.002057] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
  268. [ 0.002083] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
  269. [ 0.004107] ASID allocator initialised with 32768 entries
  270. [ 0.004289] rcu: Hierarchical SRCU implementation.
  271. [ 0.007185] Platform MSI: interrupt-controller@fd440000 domain created
  272. [ 0.007800] PCI/MSI: /interrupt-controller@fd400000/interrupt-controller@fd440000 domain created
  273. [ 0.008249] EFI services will not be available.
  274. [ 0.008731] smp: Bringing up secondary CPUs ...
  275. [ 0.009635] Detected VIPT I-cache on CPU1
  276. [ 0.009675] GICv3: CPU1: found redistributor 100 region 0:0x00000000fd480000
  277. [ 0.009729] CPU1: using LPI pending table @0x00000000ea850000
  278. [ 0.009787] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
  279. [ 0.010723] Detected VIPT I-cache on CPU2
  280. [ 0.010758] GICv3: CPU2: found redistributor 200 region 0:0x00000000fd4a0000
  281. [ 0.010807] CPU2: using LPI pending table @0x00000000ea860000
  282. [ 0.010853] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
  283. [ 0.011751] Detected VIPT I-cache on CPU3
  284. [ 0.011785] GICv3: CPU3: found redistributor 300 region 0:0x00000000fd4c0000
  285. [ 0.011836] CPU3: using LPI pending table @0x00000000ea870000
  286. [ 0.011879] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
  287. [ 0.012018] smp: Brought up 1 node, 4 CPUs
  288. [ 0.012071] SMP: Total of 4 processors activated.
  289. [ 0.012082] CPU features: detected: GIC system register CPU interface
  290. [ 0.012090] CPU features: detected: Privileged Access Never
  291. [ 0.012097] CPU features: detected: LSE atomic instructions
  292. [ 0.012105] CPU features: detected: User Access Override
  293. [ 0.012112] CPU features: detected: 32-bit EL0 Support
  294. [ 0.012119] CPU features: detected: RAS Extension Support
  295. [ 0.012292] CPU: All CPU(s) started at EL2
  296. [ 0.012329] alternatives: patching kernel code
  297. [ 0.020928] devtmpfs: initialized
  298. [ 0.054497] Registered cp15_barrier emulation handler
  299. [ 0.054524] Registered setend emulation handler
  300. [ 0.054893] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
  301. [ 0.054917] futex hash table entries: 1024 (order: 4, 65536 bytes)
  302. [ 0.055864] pinctrl core: initialized pinctrl subsystem
  303. [ 0.056231] regulator-dummy: no parameters
  304. [ 0.056659] DMI not present or invalid.
  305. [ 0.057098] NET: Registered protocol family 16
  306. [ 0.062290] cpuidle: using governor menu
  307. [ 0.062339] Registered FIQ tty driver
  308. [ 0.063062] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  309. [ 0.064520] DMA: preallocated 256 KiB pool for atomic allocations
  310. [ 0.070831] console [pstore-1] enabled
  311. [ 0.070842] pstore: Registered ramoops as persistent store backend
  312. [ 0.070854] ramoops: attached 0xf0000@0x110000, ecc: 0/0
  313. [ 0.078435] platform fde40000.npu: assigned reserved memory node rknpu
  314. [ 0.115532] rockchip-gpio fdd60000.gpio: probed gpio0 (fdd60000.gpio)
  315. [ 0.116279] rockchip-gpio fe740000.gpio: probed gpio1 (fe740000.gpio)
  316. [ 0.116990] rockchip-gpio fe750000.gpio: probed gpio2 (fe750000.gpio)
  317. [ 0.117686] rockchip-gpio fe760000.gpio: probed gpio3 (fe760000.gpio)
  318. [ 0.118405] rockchip-gpio fe770000.gpio: probed gpio4 (fe770000.gpio)
  319. [ 0.118563] rockchip-pinctrl pinctrl: probed pinctrl
  320. [ 0.134422] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  321. [ 0.134675] cryptd: max_cpu_qlen set to 1000
  322. [ 0.137498] console [ttyFIQ0] enabled
  323. [ 0.137788] Registered fiq debugger ttyFIQ0
  324. [ 0.138440] dc_12v: 12000 mV
  325. [ 0.138787] reg-fixed-voltage dc-12v: dc_12v supplying 12000000uV
  326. [ 0.138952] vcc3v3_sys: 3300 mV
  327. [ 0.139159] reg-fixed-voltage vcc3v3-sys: Looking up vin-supply from device tree
  328. [ 0.139195] vcc3v3_sys: supplied by dc_12v
  329. [ 0.139360] reg-fixed-voltage vcc3v3-sys: vcc3v3_sys supplying 3300000uV
  330. [ 0.139528] vcc5v0_sys: 5000 mV
  331. [ 0.139733] reg-fixed-voltage vcc5v0-sys: Looking up vin-supply from device tree
  332. [ 0.139767] vcc5v0_sys: supplied by dc_12v
  333. [ 0.139927] reg-fixed-voltage vcc5v0-sys: vcc5v0_sys supplying 5000000uV
  334. [ 0.140301] vcc5v0_host: no parameters
  335. [ 0.140578] reg-fixed-voltage vcc5v0-host-regulator: vcc5v0_host supplying 0uV
  336. [ 0.140877] vcc5v0_otg: no parameters
  337. [ 0.141155] reg-fixed-voltage vcc5v0-otg-regulator: vcc5v0_otg supplying 0uV
  338. [ 0.141450] vcc5v0_hub: no parameters
  339. [ 0.141723] reg-fixed-voltage vcc5v0-usbhub-regulator: vcc5v0_hub supplying 0uV
  340. [ 0.141931] pcie30_avdd0v9: 900 mV
  341. [ 0.142127] reg-fixed-voltage pcie30-avdd0v9: Looking up vin-supply from device tree
  342. [ 0.142163] pcie30_avdd0v9: supplied by vcc3v3_sys
  343. [ 0.142326] reg-fixed-voltage pcie30-avdd0v9: pcie30_avdd0v9 supplying 900000uV
  344. [ 0.142485] pcie30_avdd1v8: 1800 mV
  345. [ 0.142695] reg-fixed-voltage pcie30-avdd1v8: Looking up vin-supply from device tree
  346. [ 0.142732] pcie30_avdd1v8: supplied by vcc3v3_sys
  347. [ 0.142899] reg-fixed-voltage pcie30-avdd1v8: pcie30_avdd1v8 supplying 1800000uV
  348. [ 0.143066] vcc3v3_bu: 3300 mV
  349. [ 0.143275] reg-fixed-voltage vcc3v3-bu: Looking up vin-supply from device tree
  350. [ 0.143310] vcc3v3_bu: supplied by vcc5v0_sys
  351. [ 0.143457] reg-fixed-voltage vcc3v3-bu: vcc3v3_bu supplying 3300000uV
  352. [ 0.144088] pcie30_3v3: 100 <--> 3300 mV at 3300 mV
  353. [ 0.144948] rk_iommu fdea0800.iommu: version = 2
  354. [ 0.145685] rockchip-pm-domain fdd90000.power-management:power-controller: Looking up pd_vpu-supply from device tree
  355. [ 0.145734] rockchip-pm-domain fdd90000.power-management:power-controller: Looking up pd_vpu-supply property in node /power-management@fdd90000/power-controller failed
  356. [ 0.145830] rk_iommu fded0480.iommu: version = 2
  357. [ 0.146143] rockchip-pm-domain fdd90000.power-management:power-controller: Looking up pd_rga-supply from device tree
  358. [ 0.146189] rockchip-pm-domain fdd90000.power-management:power-controller: Looking up pd_rga-supply property in node /power-management@fdd90000/power-controller failed
  359. [ 0.146467] rk_iommu fdee0800.iommu: version = 2
  360. [ 0.146865] rk_iommu fdef0800.iommu: version = 2
  361. [ 0.147237] rk_iommu fdf40f00.iommu: version = 2
  362. [ 0.147673] rk_iommu fdf80800.iommu: version = 2
  363. [ 0.148064] rk_iommu fdff1a00.iommu: version = 2
  364. [ 0.148416] rk_iommu fe043e00.iommu: version = 2
  365. [ 0.149200] rockchip-pm-domain fdd90000.power-management:power-controller: Looking up pd_rkvenc-supply from device tree
  366. [ 0.149242] vgaarb: loaded
  367. [ 0.149250] rockchip-pm-domain fdd90000.power-management:power-controller: Looking up pd_rkvenc-supply property in node /power-management@fdd90000/power-controller failed
  368. [ 0.149316] rockchip-pm-domain fdd90000.power-management:power-controller: Looking up pd_rkvdec-supply from device tree
  369. [ 0.149361] rockchip-pm-domain fdd90000.power-management:power-controller: Looking up pd_rkvdec-supply property in node /power-management@fdd90000/power-controller failed
  370. [ 0.149426] rockchip-pm-domain fdd90000.power-management:power-controller: Looking up pd_vi-supply from device tree
  371. [ 0.149468] rockchip-pm-domain fdd90000.power-management:power-controller: Looking up pd_vi-supply property in node /power-management@fdd90000/power-controller failed
  372. [ 0.149771] SCSI subsystem initialized
  373. [ 0.150064] libata version 3.00 loaded.
  374. [ 0.150399] usbcore: registered new interface driver usbfs
  375. [ 0.150492] usbcore: registered new interface driver hub
  376. [ 0.150572] usbcore: registered new device driver usb
  377. [ 0.150750] media: Linux media interface: v0.10
  378. [ 0.150818] videodev: Linux video capture interface: v2.00
  379. [ 0.150954] pps_core: LinuxPPS API ver. 1 registered
  380. [ 0.150980] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  381. [ 0.151024] PTP clock support registered
  382. [ 0.151501] arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0
  383. [ 0.154447] Advanced Linux Sound Architecture Driver Initialized.
  384. [ 0.155153] Bluetooth: Core ver 2.22
  385. [ 0.155225] NET: Registered protocol family 31
  386. [ 0.155251] Bluetooth: HCI device and connection manager initialized
  387. [ 0.155282] Bluetooth: HCI socket layer initialized
  388. [ 0.155308] Bluetooth: L2CAP socket layer initialized
  389. [ 0.155368] Bluetooth: SCO socket layer initialized
  390. [ 0.155929] rockchip-cpuinfo cpuinfo: SoC : 35682000
  391. [ 0.155960] rockchip-cpuinfo cpuinfo: Serial : 02dfe1ede645d3f5
  392. [ 0.157210] clocksource: Switched to clocksource arch_sys_counter
  393. [ 0.277230] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
  394. [ 0.277684] NET: Registered protocol family 2
  395. [ 0.278662] tcp_listen_portaddr_hash hash table entries: 2048 (order: 4, 81920 bytes)
  396. [ 0.278789] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
  397. [ 0.279075] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes)
  398. [ 0.280096] TCP: Hash tables configured (established 32768 bind 32768)
  399. [ 0.280373] UDP hash table entries: 2048 (order: 5, 196608 bytes)
  400. [ 0.280716] UDP-Lite hash table entries: 2048 (order: 5, 196608 bytes)
  401. [ 0.281319] NET: Registered protocol family 1
  402. [ 0.282063] RPC: Registered named UNIX socket transport module.
  403. [ 0.282090] RPC: Registered udp transport module.
  404. [ 0.282103] RPC: Registered tcp transport module.
  405. [ 0.282114] RPC: Registered tcp NFSv4.1 backchannel transport module.
  406. [ 0.282953] PCI: CLS 0 bytes, default 64
  407. [ 0.284025] Trying to unpack rootfs image as initramfs...
  408. [ 0.601322] Freeing initrd memory: 5976K
  409. [ 0.602872] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
  410. [ 0.605846] Initialise system trusted keyrings
  411. [ 0.606162] workingset: timestamp_bits=45 max_order=20 bucket_order=0
  412. [ 0.617091] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  413. [ 0.618306] NFS: Registering the id_resolver key type
  414. [ 0.618359] Key type id_resolver registered
  415. [ 0.618375] Key type id_legacy registered
  416. [ 0.618424] ntfs: driver 2.1.32 [Flags: R/O].
  417. [ 0.618744] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
  418. [ 0.619110] fuse init (API version 7.27)
  419. [ 0.619618] SGI XFS with security attributes, no debug enabled
  420. [ 0.623614] NET: Registered protocol family 38
  421. [ 0.623670] Key type asymmetric registered
  422. [ 0.623685] Asymmetric key parser 'x509' registered
  423. [ 0.623743] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
  424. [ 0.623769] io scheduler noop registered
  425. [ 0.623792] io scheduler deadline registered
  426. [ 0.624037] io scheduler cfq registered (default)
  427. [ 0.624066] io scheduler mq-deadline registered
  428. [ 0.624089] io scheduler kyber registered
  429. [ 0.627757] phy phy-fe8a0000.usb2-phy.0: Looking up phy-supply from device tree
  430. [ 0.627810] vcc5v0_host: could not add device link phy-fe8a0000.usb2-phy.0 err -2
  431. [ 0.627885] phy phy-fe8a0000.usb2-phy.0: Linked as a consumer to regulator.4
  432. [ 0.628061] phy phy-fe8a0000.usb2-phy.1: Looking up phy-supply from device tree
  433. [ 0.628086] phy phy-fe8a0000.usb2-phy.1: Looking up phy-supply property in node /usb2-phy@fe8a0000/otg-port failed
  434. [ 0.628221] phy phy-fe8a0000.usb2-phy.1: Looking up vbus-supply from device tree
  435. [ 0.628386] phy phy-fe8a0000.usb2-phy.1: Linked as a consumer to regulator.5
  436. [ 0.630438] extcon extcon1: failed to create extcon usb2-phy link
  437. [ 0.630570] phy phy-fe8b0000.usb2-phy.2: Looking up phy-supply from device tree
  438. [ 0.630617] vcc5v0_host: could not add device link phy-fe8b0000.usb2-phy.2 err -2
  439. [ 0.630746] phy phy-fe8b0000.usb2-phy.2: Linked as a consumer to regulator.4
  440. [ 0.630909] phy phy-fe8b0000.usb2-phy.3: Looking up phy-supply from device tree
  441. [ 0.630951] vcc5v0_host: could not add device link phy-fe8b0000.usb2-phy.3 err -2
  442. [ 0.631026] phy phy-fe8b0000.usb2-phy.3: Linked as a consumer to regulator.4
  443. [ 0.631220] phy phy-fe8b0000.usb2-phy.3: Looking up vbus-supply from device tree
  444. [ 0.631255] phy phy-fe8b0000.usb2-phy.3: Looking up vbus-supply property in node /usb2-phy@fe8b0000/otg-port failed
  445. [ 0.631297] phy phy-fe8b0000.usb2-phy.3: No vbus specified for otg port
  446. [ 0.633706] phy phy-fe850000.video-phy.4: Looking up phy-supply from device tree
  447. [ 0.633754] phy phy-fe850000.video-phy.4: Looking up phy-supply property in node /video-phy@fe850000 failed
  448. [ 0.636348] phy phy-fe820000.phy.5: Looking up phy-supply from device tree
  449. [ 0.636398] phy phy-fe820000.phy.5: Looking up phy-supply property in node /phy@fe820000 failed
  450. [ 0.637017] phy phy-fe830000.phy.6: Looking up phy-supply from device tree
  451. [ 0.637055] phy phy-fe830000.phy.6: Looking up phy-supply property in node /phy@fe830000 failed
  452. [ 0.637804] phy phy-fe840000.phy.7: Looking up phy-supply from device tree
  453. [ 0.637846] phy phy-fe840000.phy.7: Looking up phy-supply property in node /phy@fe840000 failed
  454. [ 0.639280] phy phy-fe8c0000.phy.8: Looking up phy-supply from device tree
  455. [ 0.639308] phy phy-fe8c0000.phy.8: Looking up phy-supply property in node /phy@fe8c0000 failed
  456. [ 0.642562] rk-pcie 3c0000000.pcie: Looking up vpcie3v3-supply from device tree
  457. [ 0.642694] rk-pcie 3c0000000.pcie: Linked as a consumer to regulator.10
  458. [ 0.643085] rk-pcie 3c0000000.pcie: missing legacy IRQ resource
  459. [ 0.643090] rk-pcie 3c0800000.pcie: Looking up vpcie3v3-supply from device tree
  460. [ 0.643131] rk-pcie 3c0000000.pcie: Missing *config* reg space
  461. [ 0.643260] rk-pcie 3c0000000.pcie: host bridge /pcie@fe260000 ranges:
  462. [ 0.643265] rk-pcie 3c0800000.pcie: Linked as a consumer to regulator.10
  463. [ 0.643324] rk-pcie 3c0000000.pcie: err 0x300000000..0x3007fffff -> 0x00000000
  464. [ 0.643358] rk-pcie 3c0000000.pcie: IO 0x300800000..0x3008fffff -> 0x00800000
  465. [ 0.643383] rk-pcie 3c0000000.pcie: MEM 0x300900000..0x33fffffff -> 0x00900000
  466. [ 0.643925] mpp_service mpp-srv: eccf16e83 author: Finley Xiao 2021-07-05 soc: rockchip: opp_select: Export rockchip_nvmem_cell_read_u8/u16()
  467. [ 0.643958] mpp_service mpp-srv: probe start
  468. [ 0.645244] iommu: Adding device fdf40000.rkvenc to group 4
  469. [ 0.645301] mpp_rkvenc fdf40000.rkvenc: Linked as a consumer to fdf40f00.iommu
  470. [ 0.645583] mpp_rkvenc fdf40000.rkvenc: probing start
  471. [ 0.646254] mpp_rkvenc fdf40000.rkvenc: Looking up venc-supply from device tree
  472. [ 0.646294] mpp_rkvenc fdf40000.rkvenc: Looking up venc-supply property in node /rkvenc@fdf40000 failed
  473. [ 0.646338] mpp_rkvenc fdf40000.rkvenc: no regulator, devfreq is disabled
  474. [ 0.646856] mpp_rkvenc fdf40000.rkvenc: probing finish
  475. [ 0.648330] iommu: Adding device fdea0400.vdpu to group 0
  476. [ 0.648388] mpp_vdpu2 fdea0400.vdpu: Linked as a consumer to fdea0800.iommu
  477. [ 0.648695] mpp_vdpu2 fdea0400.vdpu: probe device
  478. [ 0.649496] mpp_vdpu2 fdea0400.vdpu: probing finish
  479. [ 0.650201] iommu: Adding device fdee0000.vepu to group 2
  480. [ 0.650257] mpp_vepu2 fdee0000.vepu: Linked as a consumer to fdee0800.iommu
  481. [ 0.650574] mpp_vepu2 fdee0000.vepu: probe device
  482. [ 0.651354] mpp_vepu2 fdee0000.vepu: probing finish
  483. [ 0.652054] iommu: Adding device fdef0000.iep to group 3
  484. [ 0.652111] mpp-iep2 fdef0000.iep: Linked as a consumer to fdef0800.iommu
  485. [ 0.652328] mpp-iep2 fdef0000.iep: probe device
  486. [ 0.652962] mpp-iep2 fdef0000.iep: allocate roi buffer failed
  487. [ 0.653190] mpp-iep2 fdef0000.iep: probing finish
  488. [ 0.653905] iommu: Adding device fded0000.jpegd to group 1
  489. [ 0.653962] mpp_jpgdec fded0000.jpegd: Linked as a consumer to fded0480.iommu
  490. [ 0.654174] mpp_jpgdec fded0000.jpegd: probe device
  491. [ 0.654930] mpp_jpgdec fded0000.jpegd: probing finish
  492. [ 0.655636] iommu: Adding device fdf80200.rkvdec to group 5
  493. [ 0.655678] mpp_rkvdec2 fdf80200.rkvdec: Linked as a consumer to fdf80800.iommu
  494. [ 0.655723] rk-pcie 3c0800000.pcie: missing legacy IRQ resource
  495. [ 0.655766] rk-pcie 3c0800000.pcie: Missing *config* reg space
  496. [ 0.655798] rk-pcie 3c0800000.pcie: host bridge /pcie@fe280000 ranges:
  497. [ 0.655845] rk-pcie 3c0800000.pcie: err 0x380000000..0x3807fffff -> 0x80000000
  498. [ 0.655884] rk-pcie 3c0800000.pcie: IO 0x380800000..0x3808fffff -> 0x80800000
  499. [ 0.655914] rk-pcie 3c0800000.pcie: MEM 0x380900000..0x3bfffffff -> 0x80900000
  500. [ 0.656022] mpp_rkvdec2 fdf80200.rkvdec: probing start
  501. [ 0.656718] mpp_rkvdec2 fdf80200.rkvdec: shared_niu_a is not found!
  502. [ 0.656748] rkvdec2_init:875: No niu aclk reset resource define
  503. [ 0.656776] mpp_rkvdec2 fdf80200.rkvdec: shared_niu_h is not found!
  504. [ 0.656797] rkvdec2_init:878: No niu hclk reset resource define
  505. [ 0.657278] mpp_rkvdec2 fdf80200.rkvdec: sram_start 0x00000000fdcc0000
  506. [ 0.657311] mpp_rkvdec2 fdf80200.rkvdec: rcb_iova 0x0000000010000000
  507. [ 0.657335] mpp_rkvdec2 fdf80200.rkvdec: sram_size 45056
  508. [ 0.657357] mpp_rkvdec2 fdf80200.rkvdec: rcb_size 65536
  509. [ 0.657381] mpp_rkvdec2 fdf80200.rkvdec: min_width 512
  510. [ 0.657422] mpp_rkvdec2 fdf80200.rkvdec: probing finish
  511. [ 0.657877] mpp_service mpp-srv: probe success
  512. [ 0.665991] dma-pl330 fe530000.dmac: Loaded driver for PL330 DMAC-241330
  513. [ 0.666040] dma-pl330 fe530000.dmac: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
  514. [ 0.669607] dma-pl330 fe550000.dmac: Loaded driver for PL330 DMAC-241330
  515. [ 0.669648] dma-pl330 fe550000.dmac: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
  516. [ 0.672101] rockchip-system-monitor rockchip-system-monitor: system monitor probe
  517. [ 0.757302] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
  518. [ 0.758914] fe650000.serial: ttyS1 at MMIO 0xfe650000 (irq = 64, base_baud = 1500000) is a 16550A
  519. [ 0.762333] random: fast init done
  520. [ 0.762683] random: crng init done
  521. [ 0.763504] iommu: Adding device fe040000.vop to group 7
  522. [ 0.763564] rockchip-vop2 fe040000.vop: Linked as a consumer to fe043e00.iommu
  523. [ 0.769754] rockchip-drm display-subsystem: Linked as a consumer to fe040000.vop
  524. [ 0.771221] rockchip-drm display-subsystem: Linked as a consumer to fe0a0000.hdmi
  525. [ 0.773441] rockchip-drm display-subsystem: defer getting devfreq
  526. [ 0.773826] rockchip-vop2 fe040000.vop: [drm:vop2_bind] vp0 assign plane mask: 0x0, primary plane phy id: -1
  527. [ 0.773903] rockchip-vop2 fe040000.vop: [drm:vop2_bind] vp1 assign plane mask: 0x0, primary plane phy id: -1
  528. [ 0.773940] rockchip-vop2 fe040000.vop: [drm:vop2_bind] vp2 assign plane mask: 0x0, primary plane phy id: -1
  529. [ 0.774310] [drm] unsupported AFBC format[3432564e]
  530. [ 0.774398] [drm] failed to init overlay plane Cluster0-win1
  531. [ 0.774488] [drm] failed to init overlay plane Cluster1-win1
  532. [ 0.774792] rockchip-drm display-subsystem: bound fe040000.vop (ops 0xffffff8008e66528)
  533. [ 0.775094] dwhdmi-rockchip fe0a0000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
  534. [ 0.775849] dwhdmi-rockchip fe0a0000.hdmi: registered DesignWare HDMI I2C bus driver
  535. [ 0.776677] rockchip-drm display-subsystem: bound fe0a0000.hdmi (ops 0xffffff8008e69f30)
  536. [ 0.776714] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  537. [ 0.776736] [drm] No driver support for vblank timestamp query.
  538. [ 0.776938] rockchip-drm display-subsystem: failed to parse loader memory
  539. [ 0.777022] [drm] Cannot find any crtc or sizes
  540. [ 0.777258] [drm] Cannot find any crtc or sizes
  541. [ 0.778521] [drm] Initialized rockchip 2.0.0 20140818 for display-subsystem on minor 0
  542. [ 0.786384] rockchip-pm-domain fdd90000.power-management:power-controller: Looking up pd_gpu-supply from device tree
  543. [ 0.786444] rockchip-pm-domain fdd90000.power-management:power-controller: Looking up pd_gpu-supply property in node /power-management@fdd90000/power-controller failed
  544. [ 0.786520] mali fde60000.gpu: Kernel DDK version g2p0-01eac0
  545. [ 0.786633] mali fde60000.gpu: Looking up mali-supply from device tree
  546. [ 0.786676] mali fde60000.gpu: Power management initialization failed error = -517
  547. [ 0.786719] mali fde60000.gpu: Device initialization Deferred
  548. [ 0.787347] cacheinfo: Unable to detect cache hierarchy for CPU 0
  549. [ 0.788318] brd: module loaded
  550. [ 0.798463] loop: module loaded
  551. [ 0.799130] zram: Added device: zram0
  552. [ 0.799323] lkdtm: No crash points registered, enable through debugfs
  553. [ 0.803104] libphy: Fixed MDIO Bus: probed
  554. [ 0.805254] rk_gmac-dwmac fe010000.ethernet: Looking up phy-supply from device tree
  555. [ 0.805311] rk_gmac-dwmac fe010000.ethernet: Looking up phy-supply property in node /ethernet@fe010000 failed
  556. [ 0.805347] rk_gmac-dwmac fe010000.ethernet: no regulator found
  557. [ 0.805374] rk_gmac-dwmac fe010000.ethernet: clock input or output? (output).
  558. [ 0.805400] rk_gmac-dwmac fe010000.ethernet: TX delay(0x42).
  559. [ 0.805423] rk_gmac-dwmac fe010000.ethernet: RX delay(0x28).
  560. [ 0.805451] rk_gmac-dwmac fe010000.ethernet: integrated PHY? (no).
  561. [ 0.810548] rk_gmac-dwmac fe010000.ethernet: init for RGMII
  562. [ 0.810900] rk_gmac-dwmac fe010000.ethernet: User ID: 0x30, Synopsys ID: 0x51
  563. [ 0.810932] rk_gmac-dwmac fe010000.ethernet: DWMAC4/5
  564. [ 0.810958] rk_gmac-dwmac fe010000.ethernet: DMA HW capability register supported
  565. [ 0.810980] rk_gmac-dwmac fe010000.ethernet: RX Checksum Offload Engine supported
  566. [ 0.811001] rk_gmac-dwmac fe010000.ethernet: TX Checksum insertion supported
  567. [ 0.811022] rk_gmac-dwmac fe010000.ethernet: Wake-Up On Lan supported
  568. [ 0.811090] rk_gmac-dwmac fe010000.ethernet: TSO supported
  569. [ 0.811106] rk_gmac-dwmac fe010000.ethernet: Enable RX Mitigation via HW Watchdog Timer
  570. [ 0.811122] rk_gmac-dwmac fe010000.ethernet: TSO feature enabled
  571. [ 0.943916] libphy: stmmac: probed
  572. [ 0.958318] usbcore: registered new interface driver rndis_wlan
  573. [ 0.958431] usbcore: registered new interface driver rtl8150
  574. [ 0.958520] usbcore: registered new interface driver r8152
  575. [ 0.958601] usbcore: registered new interface driver asix
  576. [ 0.958676] usbcore: registered new interface driver ax88179_178a
  577. [ 0.958751] usbcore: registered new interface driver cdc_ether
  578. [ 0.958831] usbcore: registered new interface driver net1080
  579. [ 0.958907] usbcore: registered new interface driver rndis_host
  580. [ 0.958980] usbcore: registered new interface driver cdc_subset
  581. [ 0.959053] usbcore: registered new interface driver zaurus
  582. [ 0.959152] usbcore: registered new interface driver cdc_ncm
  583. [ 0.959228] usbcore: registered new interface driver cdc_mbim
  584. [ 0.960902] dwc3 fcc00000.dwc3: Failed to get clk 'ref': -2
  585. [ 0.968090] dwc3 fd000000.dwc3: Failed to get clk 'ref': -2
  586. [ 0.973285] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  587. [ 0.973336] ehci-pci: EHCI PCI platform driver
  588. [ 0.973455] ehci-platform: EHCI generic platform driver
  589. [ 0.975822] ehci-platform fd800000.usb: EHCI Host Controller
  590. [ 0.976201] ehci-platform fd800000.usb: new USB bus registered, assigned bus number 1
  591. [ 0.976823] ehci-platform fd800000.usb: irq 11, io mem 0xfd800000
  592. [ 0.987258] ehci-platform fd800000.usb: USB 2.0 started, EHCI 1.00
  593. [ 0.987617] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
  594. [ 0.987649] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  595. [ 0.987680] usb usb1: Product: EHCI Host Controller
  596. [ 0.987702] usb usb1: Manufacturer: Linux 4.19.193 ehci_hcd
  597. [ 0.987723] usb usb1: SerialNumber: fd800000.usb
  598. [ 0.988411] hub 1-0:1.0: USB hub found
  599. [ 0.988492] hub 1-0:1.0: 1 port detected
  600. [ 0.991344] ehci-platform fd880000.usb: EHCI Host Controller
  601. [ 0.991627] ehci-platform fd880000.usb: new USB bus registered, assigned bus number 2
  602. [ 0.992110] ehci-platform fd880000.usb: irq 13, io mem 0xfd880000
  603. [ 1.003924] ehci-platform fd880000.usb: USB 2.0 started, EHCI 1.00
  604. [ 1.004258] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
  605. [ 1.004290] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  606. [ 1.004313] usb usb2: Product: EHCI Host Controller
  607. [ 1.004335] usb usb2: Manufacturer: Linux 4.19.193 ehci_hcd
  608. [ 1.004356] usb usb2: SerialNumber: fd880000.usb
  609. [ 1.005058] hub 2-0:1.0: USB hub found
  610. [ 1.005132] hub 2-0:1.0: 1 port detected
  611. [ 1.006198] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  612. [ 1.006247] ohci-pci: OHCI PCI platform driver
  613. [ 1.006356] ohci-platform: OHCI generic platform driver
  614. [ 1.006709] ohci-platform fd840000.usb: Generic Platform OHCI controller
  615. [ 1.007025] ohci-platform fd840000.usb: new USB bus registered, assigned bus number 3
  616. [ 1.007533] ohci-platform fd840000.usb: irq 12, io mem 0xfd840000
  617. [ 1.068176] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
  618. [ 1.068209] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  619. [ 1.068225] usb usb3: Product: Generic Platform OHCI controller
  620. [ 1.068238] usb usb3: Manufacturer: Linux 4.19.193 ohci_hcd
  621. [ 1.068251] usb usb3: SerialNumber: fd840000.usb
  622. [ 1.068925] hub 3-0:1.0: USB hub found
  623. [ 1.068998] hub 3-0:1.0: 1 port detected
  624. [ 1.069767] ohci-platform fd8c0000.usb: Generic Platform OHCI controller
  625. [ 1.070025] ohci-platform fd8c0000.usb: new USB bus registered, assigned bus number 4
  626. [ 1.070375] ohci-platform fd8c0000.usb: irq 14, io mem 0xfd8c0000
  627. [ 1.128168] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
  628. [ 1.128201] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  629. [ 1.128217] usb usb4: Product: Generic Platform OHCI controller
  630. [ 1.128231] usb usb4: Manufacturer: Linux 4.19.193 ohci_hcd
  631. [ 1.128243] usb usb4: SerialNumber: fd8c0000.usb
  632. [ 1.128924] hub 4-0:1.0: USB hub found
  633. [ 1.128998] hub 4-0:1.0: 1 port detected
  634. [ 1.131143] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller
  635. [ 1.131453] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 5
  636. [ 1.132354] xhci-hcd xhci-hcd.4.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000011002010010
  637. [ 1.132454] xhci-hcd xhci-hcd.4.auto: irq 76, io mem 0xfcc00000
  638. [ 1.132981] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
  639. [ 1.133013] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  640. [ 1.133038] usb usb5: Product: xHCI Host Controller
  641. [ 1.133060] usb usb5: Manufacturer: Linux 4.19.193 xhci-hcd
  642. [ 1.133081] usb usb5: SerialNumber: xhci-hcd.4.auto
  643. [ 1.133782] hub 5-0:1.0: USB hub found
  644. [ 1.133893] hub 5-0:1.0: 1 port detected
  645. [ 1.134434] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller
  646. [ 1.134704] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 6
  647. [ 1.134747] xhci-hcd xhci-hcd.4.auto: Host supports USB 3.0 SuperSpeed
  648. [ 1.134872] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
  649. [ 1.135091] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
  650. [ 1.135122] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  651. [ 1.135146] usb usb6: Product: xHCI Host Controller
  652. [ 1.135161] usb usb6: Manufacturer: Linux 4.19.193 xhci-hcd
  653. [ 1.135174] usb usb6: SerialNumber: xhci-hcd.4.auto
  654. [ 1.135819] hub 6-0:1.0: USB hub found
  655. [ 1.135894] hub 6-0:1.0: 1 port detected
  656. [ 1.136639] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
  657. [ 1.136939] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 7
  658. [ 1.138247] xhci-hcd xhci-hcd.5.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000011002010010
  659. [ 1.138337] xhci-hcd xhci-hcd.5.auto: irq 77, io mem 0xfd000000
  660. [ 1.138855] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
  661. [ 1.138887] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  662. [ 1.138910] usb usb7: Product: xHCI Host Controller
  663. [ 1.138931] usb usb7: Manufacturer: Linux 4.19.193 xhci-hcd
  664. [ 1.138952] usb usb7: SerialNumber: xhci-hcd.5.auto
  665. [ 1.139659] hub 7-0:1.0: USB hub found
  666. [ 1.139735] hub 7-0:1.0: 1 port detected
  667. [ 1.140271] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
  668. [ 1.140558] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 8
  669. [ 1.140605] xhci-hcd xhci-hcd.5.auto: Host supports USB 3.0 SuperSpeed
  670. [ 1.140733] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
  671. [ 1.140951] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
  672. [ 1.140983] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  673. [ 1.141007] usb usb8: Product: xHCI Host Controller
  674. [ 1.141029] usb usb8: Manufacturer: Linux 4.19.193 xhci-hcd
  675. [ 1.141050] usb usb8: SerialNumber: xhci-hcd.5.auto
  676. [ 1.141706] hub 8-0:1.0: USB hub found
  677. [ 1.141792] hub 8-0:1.0: 1 port detected
  678. [ 1.142550] usbcore: registered new interface driver cdc_acm
  679. [ 1.142570] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  680. [ 1.142654] usbcore: registered new interface driver cdc_wdm
  681. [ 1.143020] usbcore: registered new interface driver uas
  682. [ 1.143274] usbcore: registered new interface driver usb-storage
  683. [ 1.143437] usbcore: registered new interface driver usbserial_generic
  684. [ 1.143499] usbserial: USB Serial support registered for generic
  685. [ 1.143594] usbcore: registered new interface driver cp210x
  686. [ 1.143637] usbserial: USB Serial support registered for cp210x
  687. [ 1.143808] usbcore: registered new interface driver ftdi_sio
  688. [ 1.143898] usbserial: USB Serial support registered for FTDI USB Serial Device
  689. [ 1.144335] usbcore: registered new interface driver keyspan
  690. [ 1.144402] usbserial: USB Serial support registered for Keyspan - (without firmware)
  691. [ 1.144460] usbserial: USB Serial support registered for Keyspan 1 port adapter
  692. [ 1.144516] usbserial: USB Serial support registered for Keyspan 2 port adapter
  693. [ 1.144568] usbserial: USB Serial support registered for Keyspan 4 port adapter
  694. [ 1.144674] usbcore: registered new interface driver option
  695. [ 1.144730] usbserial: USB Serial support registered for GSM modem (1-port)
  696. [ 1.145340] usbcore: registered new interface driver oti6858
  697. [ 1.145397] usbserial: USB Serial support registered for oti6858
  698. [ 1.145491] usbcore: registered new interface driver pl2303
  699. [ 1.145554] usbserial: USB Serial support registered for pl2303
  700. [ 1.145677] usbcore: registered new interface driver qcserial
  701. [ 1.145733] usbserial: USB Serial support registered for Qualcomm USB modem
  702. [ 1.145881] usbcore: registered new interface driver sierra
  703. [ 1.145927] usbserial: USB Serial support registered for Sierra USB modem
  704. [ 1.148308] usbcore: registered new interface driver usbtouchscreen
  705. [ 1.148445] cyttsp5_loader_init: Parade TTSP FW Loader Driver (Built TTDA.03.08.874312) rc=0
  706. [ 1.148480] cyttsp5_device_access_init: Parade TTSP Device Access Driver (Built TTDA.03.08.874312) rc=0
  707. [ 1.149456] i2c /dev entries driver
  708. [ 1.152071] fan53555-regulator 0-001c: FAN53555 Option[12] Rev[15] Detected!
  709. [ 1.152608] vdd_cpu: override max_uV, 1390000 -> 1387500
  710. [ 1.154875] vdd_cpu: 712 <--> 1387 mV at 1025 mV
  711. [ 1.155618] fan53555-regulator 0-001c: Looking up vin-supply from device tree
  712. [ 1.155657] vdd_cpu: supplied by vcc5v0_sys
  713. [ 1.157886] rk808 0-0020: chip id: 0x8090
  714. [ 1.157967] rk808 0-0020: No cache defaults, reading back from HW
  715. [ 1.181784] rk808 0-0020: source: on=0x40, off=0x00
  716. [ 1.181823] rk808 0-0020: support dcdc3 fb mode:-22, 63
  717. [ 1.181843] rk808 0-0020: support pmic reset mode:0,0
  718. [ 1.188389] rk808-regulator rk808-regulator: there is no dvs0 gpio
  719. [ 1.188454] rk808-regulator rk808-regulator: there is no dvs1 gpio
  720. [ 1.188552] vdd_logic: 500 <--> 1350 mV at 900 mV
  721. [ 1.188841] rk808 0-0020: Looking up vcc1-supply from device tree
  722. [ 1.188880] vdd_logic: supplied by vcc3v3_sys
  723. [ 1.189160] vdd_gpu: 500 <--> 1350 mV at 900 mV
  724. [ 1.189414] rk808 0-0020: Looking up vcc2-supply from device tree
  725. [ 1.189451] vdd_gpu: supplied by vcc3v3_sys
  726. [ 1.189696] vcc_ddr: at 500 mV
  727. [ 1.189944] rk808 0-0020: Looking up vcc3-supply from device tree
  728. [ 1.189980] vcc_ddr: supplied by vcc3v3_sys
  729. [ 1.190232] vdd_npu: 500 <--> 1350 mV at 900 mV
  730. [ 1.190462] rk808 0-0020: Looking up vcc4-supply from device tree
  731. [ 1.190490] vdd_npu: supplied by vcc3v3_sys
  732. [ 1.190795] vcc_1v8: 1800 mV
  733. [ 1.191028] rk808 0-0020: Looking up vcc9-supply from device tree
  734. [ 1.191063] vcc_1v8: supplied by vcc3v3_sys
  735. [ 1.191304] vdda0v9_image: 900 mV
  736. [ 1.191534] rk808 0-0020: Looking up vcc5-supply from device tree
  737. [ 1.191570] vdda0v9_image: supplied by vcc3v3_sys
  738. [ 1.191794] vdda_0v9: 900 mV
  739. [ 1.192042] rk808 0-0020: Looking up vcc5-supply from device tree
  740. [ 1.192078] vdda_0v9: supplied by vcc3v3_sys
  741. [ 1.192310] vdda0v9_pmu: 900 mV
  742. [ 1.192544] rk808 0-0020: Looking up vcc5-supply from device tree
  743. [ 1.192581] vdda0v9_pmu: supplied by vcc3v3_sys
  744. [ 1.192822] vccio_acodec: 3300 mV
  745. [ 1.193059] rk808 0-0020: Looking up vcc6-supply from device tree
  746. [ 1.193094] vccio_acodec: supplied by vcc3v3_sys
  747. [ 1.193344] vccio_sd: 1800 <--> 3300 mV at 1800 mV
  748. [ 1.193577] rk808 0-0020: Looking up vcc6-supply from device tree
  749. [ 1.193613] vccio_sd: supplied by vcc3v3_sys
  750. [ 1.193895] vcc3v3_pmu: 3300 mV
  751. [ 1.194128] rk808 0-0020: Looking up vcc6-supply from device tree
  752. [ 1.194164] vcc3v3_pmu: supplied by vcc3v3_sys
  753. [ 1.194417] vcca_1v8: 1800 mV
  754. [ 1.194651] rk808 0-0020: Looking up vcc7-supply from device tree
  755. [ 1.194689] vcca_1v8: supplied by vcc3v3_sys
  756. [ 1.194947] vcca1v8_pmu: 1800 mV
  757. [ 1.195180] rk808 0-0020: Looking up vcc7-supply from device tree
  758. [ 1.195216] vcca1v8_pmu: supplied by vcc3v3_sys
  759. [ 1.195455] vcca1v8_image: 1800 mV
  760. [ 1.195716] rk808 0-0020: Looking up vcc7-supply from device tree
  761. [ 1.195752] vcca1v8_image: supplied by vcc3v3_sys
  762. [ 1.195980] vcc_3v3: no parameters
  763. [ 1.196201] rk808 0-0020: Looking up vcc9-supply from device tree
  764. [ 1.196238] vcc_3v3: supplied by vcc3v3_sys
  765. [ 1.196471] vcc3v3_sd: no parameters
  766. [ 1.196687] rk808 0-0020: Looking up vcc8-supply from device tree
  767. [ 1.196724] vcc3v3_sd: supplied by vcc3v3_sys
  768. [ 1.197136] rk817-battery rk817-battery: Failed to find matching dt id
  769. [ 1.197536] rk817-charger rk817-charger: Failed to find matching dt id
  770. [ 1.201072] input: rk805 pwrkey as /devices/platform/fdd40000.i2c/i2c-0/0-0020/rk805-pwrkey/input/input0
  771. [ 1.207871] rk808-rtc rk808-rtc: registered as rtc0
  772. [ 1.209674] rk808-rtc rk808-rtc: setting system clock to 2021-11-24 22:30:25 UTC (1637793025)
  773. [ 1.214343] iommu: Adding device fdff0000.rkisp to group 6
  774. [ 1.214408] rkisp_hw fdff0000.rkisp: Linked as a consumer to fdff1a00.iommu
  775. [ 1.214676] rkisp_hw fdff0000.rkisp: is_thunderboot: 0
  776. [ 1.214697] rkisp_hw fdff0000.rkisp: max input:0x0@0fps
  777. [ 1.214747] rkisp_hw fdff0000.rkisp: can't request region for resource [mem 0xfdff0000-0xfdffffff]
  778. [ 1.216233] usbcore: registered new interface driver uvcvideo
  779. [ 1.216261] USB Video Class driver (1.1.1)
  780. [ 1.216581] rockchip-iodomain fdc20000.syscon:io-domains: Looking up pmuio1-supply from device tree
  781. [ 1.216724] rockchip-iodomain fdc20000.syscon:io-domains: Linked as a consumer to regulator.22
  782. [ 1.216788] rockchip-iodomain fdc20000.syscon:io-domains: pmuio1(3300000 uV) supplied by vcc3v3_pmu
  783. [ 1.216841] rockchip-iodomain fdc20000.syscon:io-domains: Looking up pmuio2-supply from device tree
  784. [ 1.216996] rockchip-iodomain fdc20000.syscon:io-domains: pmuio2(3300000 uV) supplied by vcc3v3_pmu
  785. [ 1.217052] rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio1-supply from device tree
  786. [ 1.217168] rockchip-iodomain fdc20000.syscon:io-domains: Linked as a consumer to regulator.20
  787. [ 1.217260] rockchip-iodomain fdc20000.syscon:io-domains: vccio1(3300000 uV) supplied by vccio_acodec
  788. [ 1.217314] rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio2-supply from device tree
  789. [ 1.217350] rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio2-supply property in node /syscon@fdc20000/io-domains failed
  790. [ 1.217410] rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio3-supply from device tree
  791. [ 1.217519] rockchip-iodomain fdc20000.syscon:io-domains: Linked as a consumer to regulator.21
  792. [ 1.217576] rockchip-iodomain fdc20000.syscon:io-domains: vccio3(1800000 uV) supplied by vccio_sd
  793. [ 1.217628] rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio4-supply from device tree
  794. [ 1.217754] rockchip-iodomain fdc20000.syscon:io-domains: Linked as a consumer to regulator.16
  795. [ 1.217811] rockchip-iodomain fdc20000.syscon:io-domains: vccio4(1800000 uV) supplied by vcc_1v8
  796. [ 1.217862] rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio5-supply from device tree
  797. [ 1.217981] rockchip-iodomain fdc20000.syscon:io-domains: Linked as a consumer to regulator.26
  798. [ 1.218044] rockchip-iodomain fdc20000.syscon:io-domains: vccio5(3300000 uV) supplied by vcc_3v3
  799. [ 1.218094] rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio6-supply from device tree
  800. [ 1.218224] rockchip-iodomain fdc20000.syscon:io-domains: vccio6(1800000 uV) supplied by vcc_1v8
  801. [ 1.218265] rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio7-supply from device tree
  802. [ 1.218423] rockchip-iodomain fdc20000.syscon:io-domains: vccio7(3300000 uV) supplied by vcc_3v3
  803. [ 1.223388] rockchip-thermal fe710000.tsadc: tsadc is probed successfully!
  804. [ 1.225028] Bluetooth: HCI UART driver ver 2.3
  805. [ 1.225061] Bluetooth: HCI UART protocol H4 registered
  806. [ 1.225083] Bluetooth: HCI UART protocol ATH3K registered
  807. [ 1.225225] usbcore: registered new interface driver bfusb
  808. [ 1.225347] usbcore: registered new interface driver btusb
  809. [ 1.225811] cpu cpu0: leakage=26
  810. [ 1.225901] cpu cpu0: Looking up cpu-supply from device tree
  811. [ 1.226520] cpu cpu0: Linked as a consumer to regulator.11
  812. [ 1.237329] usb 1-1: new high-speed USB device number 2 using ehci-platform
  813. [ 1.253528] cpu cpu0: temp=36111, pvtm=87285 (87389 + -104)
  814. [ 1.256728] cpu cpu0: Dropping the link to regulator.11
  815. [ 1.256804] cpu cpu0: pvtm-volt-sel=1
  816. [ 1.257271] cpu cpu0: Looking up cpu-supply from device tree
  817. [ 1.257852] cpu cpu0: Linked as a consumer to regulator.11
  818. [ 1.257931] cpu cpu0: Dropping the link to regulator.11
  819. [ 1.258083] cpu cpu0: Looking up cpu-supply from device tree
  820. [ 1.258670] cpu cpu0: Linked as a consumer to regulator.11
  821. [ 1.259905] cpu cpu0: avs=0
  822. [ 1.260005] energy_model: pd0: hertz/watts ratio non-monotonically decreasing: em_cap_state 2 >= em_cap_state1
  823. [ 1.260331] energy_model: Created perf domain 0-3
  824. [ 1.260403] cpu cpu0: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0
  825. [ 1.266271] sdhci: Secure Digital Host Controller Interface driver
  826. [ 1.266310] sdhci: Copyright(c) Pierre Ossman
  827. [ 1.266324] Synopsys Designware Multimedia Card Interface Driver
  828. [ 1.268015] dwmmc_rockchip fe000000.dwmmc: IDMAC supports 32-bit address mode.
  829. [ 1.268432] dwmmc_rockchip fe000000.dwmmc: Using internal DMA controller.
  830. [ 1.268461] dwmmc_rockchip fe000000.dwmmc: Version ID is 270a
  831. [ 1.268548] dwmmc_rockchip fe000000.dwmmc: DW MMC controller at irq 41,32 bit host data width,256 deep fifo
  832. [ 1.268621] dwmmc_rockchip fe000000.dwmmc: Looking up vmmc-supply from device tree
  833. [ 1.268650] dwmmc_rockchip fe000000.dwmmc: Looking up vmmc-supply property in node /dwmmc@fe000000 failed
  834. [ 1.268744] dwmmc_rockchip fe000000.dwmmc: Looking up vqmmc-supply from device tree
  835. [ 1.268769] dwmmc_rockchip fe000000.dwmmc: Looking up vqmmc-supply property in node /dwmmc@fe000000 failed
  836. [ 1.268865] dwmmc_rockchip fe000000.dwmmc: allocated mmc-pwrseq
  837. [ 1.268881] mmc_host mmc3: card is non-removable.
  838. [ 1.281105] mmc_host mmc3: Bus speed (slot 0) = 375000Hz (slot req 400000Hz, actual 375000HZ div = 0)
  839. [ 1.294483] dwmmc_rockchip fe2b0000.dwmmc: IDMAC supports 32-bit address mode.
  840. [ 1.295009] dwmmc_rockchip fe2b0000.dwmmc: Using internal DMA controller.
  841. [ 1.295034] dwmmc_rockchip fe2b0000.dwmmc: Version ID is 270a
  842. [ 1.295096] dwmmc_rockchip fe2b0000.dwmmc: DW MMC controller at irq 53,32 bit host data width,256 deep fifo
  843. [ 1.295129] dwmmc_rockchip fe2b0000.dwmmc: Looking up vmmc-supply from device tree
  844. [ 1.295237] dwmmc_rockchip fe2b0000.dwmmc: Linked as a consumer to regulator.27
  845. [ 1.295257] dwmmc_rockchip fe2b0000.dwmmc: Looking up vqmmc-supply from device tree
  846. [ 1.295324] dwmmc_rockchip fe2b0000.dwmmc: Linked as a consumer to regulator.21
  847. [ 1.295987] vccio_sd: ramp_delay not set
  848. [ 1.304279] mmc3 mmc_send_io_op_cond err: -110
  849. [ 1.307699] mmc_host mmc1: Bus speed (slot 0) = 375000Hz (slot req 400000Hz, actual 375000HZ div = 0)
  850. [ 1.318946] mmc_host mmc3: Bus speed (slot 0) = 375000Hz (slot req 300000Hz, actual 187500HZ div = 1)
  851. [ 1.320650] sdhci-pltfm: SDHCI platform and OF driver helper
  852. [ 1.321764] sdhci-dwcmshc fe310000.sdhci: Looking up vmmc-supply from device tree
  853. [ 1.321790] sdhci-dwcmshc fe310000.sdhci: Looking up vmmc-supply property in node /sdhci@fe310000 failed
  854. [ 1.321829] sdhci-dwcmshc fe310000.sdhci: Looking up vqmmc-supply from device tree
  855. [ 1.321851] sdhci-dwcmshc fe310000.sdhci: Looking up vqmmc-supply property in node /sdhci@fe310000 failed
  856. [ 1.321882] mmc0: Unknown controller version (5). You may experience problems.
  857. [ 1.334863] mmc_host mmc3: Bus speed (slot 0) = 375000Hz (slot req 375000Hz, actual 375000HZ div = 0)
  858. [ 1.343966] mmc3 mmc_send_io_op_cond err: -110
  859. [ 1.353144] vccio_sd: ramp_delay not set
  860. [ 1.353954] mmc0: SDHCI controller on fe310000.sdhci [fe310000.sdhci] using ADMA
  861. [ 1.356319] ledtrig-cpu: registered to indicate activity on CPUs
  862. [ 1.357040] hidraw: raw HID events driver (C) Jiri Kosina
  863. [ 1.357317] mmc_host mmc3: Bus speed (slot 0) = 375000Hz (slot req 200000Hz, actual 187500HZ div = 1)
  864. [ 1.357609] usbcore: registered new interface driver usbhid
  865. [ 1.357621] usbhid: USB HID core driver
  866. [ 1.360264] rockchip-saradc fe720000.saradc: Looking up vref-supply from device tree
  867. [ 1.360381] rockchip-saradc fe720000.saradc: Linked as a consumer to regulator.23
  868. [ 1.361095] optee: probing for conduit method from DT.
  869. [ 1.361117] optee: api uid mismatch
  870. [ 1.361130] rksfc_base v1.1 2016-01-08
  871. [ 1.361701] rksfc fe300000.sfc: rksfc_probe clk rate = 99000000
  872. [ 1.361765] rkflash_dev_init enter
  873. [ 1.361790] sfc nor id: 0 0 0
  874. [ 1.361798] rkflash[1] is invalid
  875. [ 1.361800] rkflash_dev_init enter
  876. [ 1.361823] sfc_nand id: 0 0 0
  877. [ 1.361834] rkflash[2] is invalid
  878. [ 1.362615] usbcore: registered new interface driver snd-usb-audio
  879. [ 1.364418] rk817-codec rk817-codec: DMA mask not set
  880. [ 1.364568] clk: failed to reparent i2s1_mclkout_tx to clk_i2s1_8ch_tx: -22
  881. [ 1.365662] mmc_host mmc1: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
  882. [ 1.369574] Initializing XFRM netlink socket
  883. [ 1.370047] NET: Registered protocol family 10
  884. [ 1.370860] Segment Routing with IPv6
  885. [ 1.370931] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
  886. [ 1.371387] NET: Registered protocol family 17
  887. [ 1.371417] NET: Registered protocol family 15
  888. [ 1.371599] Bluetooth: RFCOMM socket layer initialized
  889. [ 1.371643] Bluetooth: RFCOMM ver 1.11
  890. [ 1.371665] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  891. [ 1.371679] Bluetooth: HIDP socket layer initialized
  892. [ 1.371716] [BT_RFKILL]: Enter rfkill_rk_init
  893. [ 1.371730] [WLAN_RFKILL]: Enter rfkill_wlan_init
  894. [ 1.372340] [WLAN_RFKILL]: Enter rfkill_wlan_probe
  895. [ 1.372393] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6256
  896. [ 1.372401] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
  897. [ 1.372409] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
  898. [ 1.372448] [WLAN_RFKILL]: wlan_platdata_parse_dt: WIFI,host_wake_irq = 125, flags = 0.
  899. [ 1.372487] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
  900. [ 1.372503] [WLAN_RFKILL]: rfkill_set_wifi_bt_power: 1
  901. [ 1.372516] [WLAN_RFKILL]: Exit rfkill_wlan_probe
  902. [ 1.373156] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 73.
  903. [ 1.373192] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 138.
  904. [ 1.373216] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 141.
  905. [ 1.373237] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 140.
  906. [ 1.373305] [BT_RFKILL]: Request irq for bt wakeup host
  907. [ 1.373405] [BT_RFKILL]: ** disable irq
  908. [ 1.373544] [BT_RFKILL]: bt_default device registered.
  909. [ 1.373682] Key type dns_resolver registered
  910. [ 1.373904] mmc_host mmc3: Bus speed (slot 0) = 375000Hz (slot req 375000Hz, actual 375000HZ div = 0)
  911. [ 1.374079] flash vendor_init_thread!
  912. [ 1.374093] flash vendor storage:20170308 ret = -1
  913. [ 1.375096] Loading compiled-in X.509 certificates
  914. [ 1.375760] pstore: Using compression: deflate
  915. [ 1.376609] rga2: Driver loaded successfully ver:3.2.63318
  916. [ 1.377008] rga2: Module initialized.
  917. [ 1.382725] mmc3 mmc_send_io_op_cond err: -110
  918. [ 1.384679] usb 1-1: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
  919. [ 1.384709] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  920. [ 1.384723] usb 1-1: Product: USB 2.0 Hub
  921. [ 1.385419] hub 1-1:1.0: USB hub found
  922. [ 1.385633] hub 1-1:1.0: 4 ports detected
  923. [ 1.396522] mmc_host mmc3: Bus speed (slot 0) = 375000Hz (slot req 100000Hz, actual 93750HZ div = 2)
  924. [ 1.407316] mali fde60000.gpu: Kernel DDK version g2p0-01eac0
  925. [ 1.407456] mali fde60000.gpu: Looking up mali-supply from device tree
  926. [ 1.407560] mali fde60000.gpu: Linked as a consumer to regulator.13
  927. [ 1.407575] mali fde60000.gpu: Looking up shadercores-supply from device tree
  928. [ 1.407594] mali fde60000.gpu: Looking up shadercores-supply property in node /gpu@fde60000 failed
  929. [ 1.407661] mali fde60000.gpu: Looking up mali-supply from device tree
  930. [ 1.407689] vdd_gpu: could not add device link fde60000.gpu err -17
  931. [ 1.407705] vdd_gpu: Failed to create debugfs directory
  932. [ 1.407720] mali fde60000.gpu: Looking up shadercores-supply from device tree
  933. [ 1.407735] mali fde60000.gpu: Looking up shadercores-supply property in node /gpu@fde60000 failed
  934. [ 1.407756] mali fde60000.gpu: dev_pm_opp_set_regulators: no regulator (shadercores) found: -19
  935. [ 1.407848] mali fde60000.gpu: leakage=8
  936. [ 1.408289] mali fde60000.gpu: avs=0
  937. [ 1.408309] W : [File] : drivers/gpu/arm/bifrost/platform/rk/mali_kbase_config_rk.c; [Line] : 112; [Func] : kbase_platform_rk_init(); power-off-delay-ms not available.
  938. [ 1.408632] mali fde60000.gpu: GPU identified as 0x2 arch 7.4.0 r1p0 status 0
  939. [ 1.408717] mali fde60000.gpu: No memory group manager is configured
  940. [ 1.409087] mali fde60000.gpu: l=-2147483648 h=2147483647 hyst=0 l_limit=0 h_limit=0 h_table=0
  941. [ 1.409709] mali fde60000.gpu: Probed as mali0
  942. [ 1.410068] adc_keys adc-keys: keymap is missing
  943. [ 1.410095] adc_keys: probe of adc-keys failed with error -22
  944. [ 1.410507] rockchip-dmc dmc: Looking up center-supply from device tree
  945. [ 1.410643] rockchip-dmc dmc: Linked as a consumer to regulator.12
  946. [ 1.410736] rockchip-dmc dmc: leakage=52
  947. [ 1.410756] rockchip-dmc dmc: leakage-volt-sel=0
  948. [ 1.410917] rockchip-dmc dmc: avs=0
  949. [ 1.410938] rockchip-dmc dmc: current ATF version 0x101
  950. [ 1.411832] rockchip-dmc dmc: normal_rate = 780000000
  951. [ 1.411848] rockchip-dmc dmc: reboot_rate = 1056000000
  952. [ 1.411861] rockchip-dmc dmc: suspend_rate = 324000000
  953. [ 1.411872] rockchip-dmc dmc: video_4k_rate = 780000000
  954. [ 1.411883] rockchip-dmc dmc: video_4k_10b_rate = 780000000
  955. [ 1.411894] rockchip-dmc dmc: boost_rate = 1056000000
  956. [ 1.411906] rockchip-dmc dmc: fixed_rate(isp|cif0|cif1|dualview) = 1056000000
  957. [ 1.411916] rockchip-dmc dmc: performance_rate = 1056000000
  958. [ 1.411936] rockchip-dmc dmc: failed to get vop pn to msch rl
  959. [ 1.412101] rockchip-dmc dmc: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0
  960. [ 1.412140] rockchip-dmc dmc: could not find power_model node
  961. [ 1.414690] asoc-simple-card hdmi-sound: i2s-hifi <-> fe400000.i2s mapping ok
  962. [ 1.414754] asoc-simple-card hdmi-sound: ASoC: no DMI vendor name!
  963. [ 1.415156] mmc_host mmc3: Bus speed (slot 0) = 375000Hz (slot req 375000Hz, actual 375000HZ div = 0)
  964. [ 1.421574] asoc-simple-card rk809-sound: rk817-hifi <-> fe410000.i2s mapping ok
  965. [ 1.421626] asoc-simple-card rk809-sound: ASoC: no DMI vendor name!
  966. [ 1.423854] mmc3 mmc_send_io_op_cond err: -110
  967. [ 1.426288] rockchip_headset rk-headset: headset_gpio request fail
  968. [ 1.426366] rockchip_headset: probe of rk-headset failed with error -16
  969. [ 1.427652] rockchip-pm-domain fdd90000.power-management:power-controller: Looking up pd_npu-supply from device tree
  970. [ 1.427694] rockchip-pm-domain fdd90000.power-management:power-controller: Looking up pd_npu-supply property in node /power-management@fdd90000/power-controller failed
  971. [ 1.427807] RKNPU fde40000.npu: RKNPU: rknpu iommu is disabled, using non-iommu mode
  972. [ 1.427841] RKNPU fde40000.npu: assigned reserved memory node rknpu
  973. [ 1.427855] RKNPU fde40000.npu: RKNPU: initialize reserved memory for rknpu device!
  974. [ 1.427923] RKNPU fde40000.npu: Looking up rknpu-supply from device tree
  975. [ 1.428075] RKNPU fde40000.npu: Linked as a consumer to regulator.15
  976. [ 1.428934] [drm] Initialized rknpu 0.4.2 20210701 for fde40000.npu on minor 1
  977. [ 1.429036] RKNPU fde40000.npu: leakage=4
  978. [ 1.429740] RKNPU fde40000.npu: avs=0
  979. [ 1.430612] RKNPU fde40000.npu: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0
  980. [ 1.431611] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  981. [ 1.452007] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  982. [ 1.452271] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
  983. [ 1.452290] cfg80211: failed to load regulatory.db
  984. [ 1.455150] ALSA device list:
  985. [ 1.455181] #0: rockchip,hdmi
  986. [ 1.455188] #1: rockchip,rk809-codec
  987. [ 1.459128] Freeing unused kernel memory: 1600K
  988. [ 1.474009] Run /init as init process
  989. Loading, please wait...
  990. Starting version 247.3-6
  991. [ 1.522706] devfreq fde60000.gpu: Couldn't update frequency transition information.
  992. [ 1.634675] dwmmc_rockchip fe2b0000.dwmmc: Successfully tuned phase to 289
  993. [ 1.634805] mmc1: new ultra high speed SDR104 SDHC card at address 0001
  994. [ 1.642961] mmcblk1: mmc1:0001 EB1QT 29.8 GiB
  995. [ 1.650769] mmcblk1: p1
  996. [ 1.664046] rk-pcie 3c0800000.pcie: PCIe Linking... LTSSM is 0x0
  997. [ 1.664064] rk-pcie 3c0000000.pcie: PCIe Linking... LTSSM is 0x1
  998. Begin: Loading essential drivers ... done.
  999. Begin: Running /scripts/init-premount ... done.
  1000. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
  1001. Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems
  1002. done.
  1003. Begin: Will now check root file system ... fsck from util-linux 2.36.1
  1004. [/sbin/fsck.ext4 (1) -- /dev/mmcblk1p1] fsck.ext4 -a -C0 /dev/mmcblk1p1
  1005. /dev/mmcblk1p1: clean, 40902/2212736 files, 497688/7729152 blocks
  1006. done.
  1007. [ 2.603748] EXT4-fs (mmcblk1p1): mounted filesystem with writeback data mode. Opts: (null)
  1008. done.
  1009. Begin: Running /scripts/local-bottom ... done.
  1010. Begin: Running /scripts/init-bottom ... done.
  1011. [ 2.680655] rk-pcie 3c0800000.pcie: PCIe Linking... LTSSM is 0x0
  1012. [ 2.680658] rk-pcie 3c0000000.pcie: PCIe Linking... LTSSM is 0x0
  1013. [ 3.077076] systemd[1]: Inserted module 'autofs4'
  1014. [ 3.095170] cgroup: cgroup2: unknown option "memory_recursiveprot"
  1015. [ 3.111745] systemd[1]: systemd 247.3-6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
  1016. [ 3.113209] systemd[1]: Detected architecture arm64.
  1017.  
  1018. Welcome to Armbian 21.11.0-trunk Bullseye!
  1019.  
  1020. [ 3.119881] systemd[1]: Set hostname to <rock-3a>.
  1021. [ 3.690630] rk-pcie 3c0800000.pcie: PCIe Linking... LTSSM is 0x0
  1022. [ 3.690674] rk-pcie 3c0000000.pcie: PCIe Linking... LTSSM is 0x0
  1023. [ 3.718288] systemd[1]: Queued start job for default target Graphical Interface.
  1024. [ 3.722497] systemd[1]: system-getty.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
  1025. [ 3.722573] systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
  1026. [ 3.726724] systemd[1]: Created slice system-getty.slice.
  1027. [ OK ] Created slice system-getty.slice.
  1028. [ 3.729558] systemd[1]: Created slice system-modprobe.slice.
  1029. [ OK ] Created slice system-modprobe.slice.
  1030. ice system-serial\xemd[1]: Created slice system-serial\x2dgetty.slice.[ OK ] Created sl
  1031. 2dgetty.slice.
  1032. [ 3.734917] systemd[1]: Created slice User and Session Slice.
  1033. [ OK ] Created slice User and Session Slice.
  1034. [ 3.735960] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch when bootsplash is active[ OK ] Started Forward Password R…uests to Wall Directory Watc bh.
  1035. eing skipped.
  1036. [ 3.736507] systemd[1]: Started Forward Password Requests to Wall Di[ OK ] Reached target Local Encrypted Volumes.
  1037. rectory Watch.
  1038. [ 3.737903] systemd[1]: Con[ OK ] Reached dtarget Paths.
  1039. ition check resulted in Arbitrary[ OK ] Reached target Slices.
  1040. [ OK ] Reached Etarget Swap.
  1041. xecutable File Formats File System Aut[ OK ] Reached otarget System Time Set.
  1042. mount Point being skipped.
  1043. [ 3.738130] systemd[1]: Reached target Local Encrypted Volumes.
  1044. [ 3.738969] systemd[1]: Reached target Paths.
  1045. [ 3.739576] systemd[1]: Reached target Slices.
  1046. [ 3.740210] systemd[1]: Reache[d target0;32m OK ] Listening onS RPCbind Server Actwvation Socket.
  1047. ap.
  1048. [ 3.740742] systemd[1]: Reached target System Time Set.
  1049. [ 3.742909] systemd[1]: Listening on RPCbind Server Activation Socket[ OK ] Listening on Syslog Socket.
  1050. .
  1051. [ 3.744666] systemd[1]: Listening on Syslog Socket.
  1052. [ OK ] Listening on fsck to fsckd communication Socket.
  1053. [ OK ] Listening on initctl Compatibility Named Pipe.
  1054. [ 3.745888] systemd[1]: Listening on fsck to fsckd communication Socket.
  1055. [ 3.746723] systemd[1]: Listening on initctl Compatibility Named Pipe.
  1056. [ 3.757337] systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
  1057. [ 3.758547] systemd[1]: Listening on Journal Socket (/dev/log).
  1058. [ OK ] Listening on Journal Socket (/dev/log).
  1059. [ 3.760141] systemd[1]: Listening on Journal Socket.
  1060. [ OK ] Listening on Journal Socket.
  1061. [ 3.765501] systemd[1]: Listening on udev Control Socket.
  1062. [ OK ] Listening on udev Control Socket.
  1063. [ 3.766952] systemd[1]: Listening on udev Kernel Socket.
  1064. [ OK ] Listening on udev Kernel Socket.
  1065. [ 3.772422] systemd[1]: Mounting Huge Pages File System...
  1066. Mounting Huge Pages File System...
  1067. Message Queue File System Mounting POSIX Message Queue File System... Mounting POSIX
  1068. ...
  1069. [ 3.785551] systemd[1]: Mounting RPC Pipe File System...
  1070. Mounting RPC Pipe File System...
  1071. [ 3.792768] systemd[1]: Mounting Kernel Debug File System...
  1072. Mounting Kernel Debug File System...
  1073. [ 3.800363] systemd[1]: Mounting Kernel Trace File System...
  1074. Mounting Kernel Trace File System...
  1075. [ 3.802259] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
  1076. [ 3.809502] systemd[1]: Starting Restore / save the current clock...
  1077. Starting Restore / save the current clock...
  1078. the console keyboard layout...rting Set the console keyboard layout... Starting Set
  1079.  
  1080. [ 3.824565] systemd[1]: Starting Create list of static device nodes for the current kernel...
  1081. Starting Create list of st…odes for the current kernel...
  1082. [ 3.832510] systemd[1]: Starting Load Kernel Module configfs...
  1083. Starting Load Kernel Module configfs...
  1084. [ 3.841390] systemd[1]: Starting Load Kernel Module drm...
  1085. Starting Load Kernel Module drm...
  1086. [ 3.849779] systemd[1]: Starting Load Kernel Module fuse...
  1087. Starting Load Kernel Module fuse...
  1088. [ 3.857878] systemd[1]: Started Nameserver information manager.
  1089. [ OK ] Started Nameserver information manager.
  1090. [ 3.872945] systemd[1]: Reached target Network (Pre).
  1091. [ OK ] Reached target Network (Pre).
  1092. [ 3.876813] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
  1093. [ 3.877083] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
  1094. [ 3.886724] systemd[1]: Starting Load Kernel Modules...
  1095. Starting Load Kernel Modules...
  1096. [ 3.893625] systemd[1]: Starting Remount Root and Kernel File Systems...
  1097. Starting Remount Root and Kernel File Systems...
  1098. [ 3.901837] systemd[1]: Starting Coldplug All udev Devices...
  1099. Starting Coldplug All udev Devices...
  1100. [ 3.914916] systemd[1]: Mounted Huge Pages File System.
  1101. [ OK ] Mounted Huge Pages File System.
  1102. [ 3.918383] systemd[1]: Mounted POSIX Message Queue File System.
  1103. [ OK ] Mounted POSIX Message Queue File System.
  1104. [ 3.921087] systemd[1]: Mounted RPC Pipe File System.
  1105. [ OK ] Mounted RPC Pipe File System.
  1106. [ 3.923505] systemd[1]: Mounted Kernel Debug File System.
  1107. [ OK ] Mounted Kernel Debug File System.
  1108. [ 3.925667] systemd[1]: Mounted Kernel Trace File System.
  1109. [ OK ] Mounted Kernel Trace File System.
  1110. [ OK ] Finished temd[1]: Finished Restore / save the current clock.
  1111. Restore / save the current clock.
  1112. [ 3.933847] systemd[1]: Finished Create list of static device nodes for the current kernel.
  1113. [ OK ] Finished Create list of st… nodes for the current kernel.
  1114. [ 3.938077] systemd[1]: modprobe@configfs.service: Succeeded.
  1115. [ 3.939785] systemd[1]: Finished Load Kernel Module configfs.
  1116. [ OK ] Finished Load Kernel Module configfs.
  1117. [ 3.943352] systemd[1]: modprobe@drm.service: Succeeded.
  1118. [ 3.945237] systemd[1]: Finished Load Kernel Module drm.
  1119. [ OK ] Finished Load Kernel Module drm.
  1120. [ 3.948360] systemd[1]: modprobe@fuse.service: Succeeded.
  1121. [ 3.949584] systemd[1]: Finished Load Kernel Module fuse.
  1122. [ OK ] Finished Load Kernel Module fuse.
  1123. [ 3.955639] systemd[1]: Finished Load Kernel Modules.
  1124. [ OK ] Finished Load Kernel Modules.
  1125. [ 3.961971] EXT4-fs (mmcblk1p1): re-mounted. Opts: commit=600,errors=remount-ro
  1126. [ 3.964230] systemd[1]: Mounting FUSE Control File System...
  1127. Mounting FUSE Control File System...
  1128. [ 3.971622] systemd[1]: Mounting Kernel Configuration File System...
  1129. Mounting Kernel Configuration File System...
  1130. [ 3.980245] systemd[1]: Starting Apply Kernel Variables...
  1131. Starting Apply Kernel Variables...
  1132. [ 3.994742] systemd[1]: Finished Remount Root and Kernel File Systems.
  1133. [ OK ] Finished Remount Root and Kernel File Systems.
  1134. [ 4.000425] systemd[1]: Mounted FUSE Control File System.
  1135. [ OK ] Mounted FUSE Control File System.
  1136. [ 4.005968] systemd[1]: Mounted Kernel Configuration File System.
  1137. [ OK ] Mounted Kernel Configuration File System.
  1138. [ 4.015275] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
  1139. [ 4.021085] systemd[1]: Starting Platform Persistent Storage Archival...
  1140. Starting Platform Persistent Storage Archival...
  1141. [ 4.028143] systemd[1]: Starting Load/Save Random Seed...
  1142. Starting Load/Save Random Seed...
  1143. [ 4.035906] systemd[1]: Starting Create System Users...
  1144. Starting Create System Users...
  1145. [ OK ] Finished Apply Kernel Variables.
  1146. [ 4.044767] systemd[1]: Finished Apply Kernel Variables.
  1147. [ 4.112347] systemd[1]: Finished Platform Persistent Storage Archival.
  1148. [ OK ] Finished Platform Persistent Storage Archival.
  1149. [ 4.126944] systemd[1]: Finished Create System Users.
  1150. [ OK ] Finished Create System Users.
  1151. [ 4.130249] systemd[1]: Finished Set the console keyboard layout.
  1152. [ OK ] Finished Set the console keyboard layout.
  1153. [ 4.133332] systemd[1]: Finished Load/Save Random Seed.
  1154. [ OK ] Finished Load/Save Random Seed.
  1155. [ 4.135351] systemd[1]: Condition check resulted in First Boot Complete being skipped.
  1156. [ 4.140228] systemd[1]: Starting Create Static Device Nodes in /dev...
  1157. Starting Create Static Device Nodes in /dev...
  1158. [ 4.199751] systemd[1]: Finished Create Static Device Nodes in /dev[ OK ] Finished Create Static Device Nodes in /dev.
  1159.  
  1160. [ 4.201668] systemd[1]: Reached target Local File Systems (Pre).
  1161. [ OK ] Reached target Local File Systems (Pre).
  1162. [ 4.208060] systemd[1]: Mounting /tmp...
  1163. Mounting /tmp...
  1164. [ 4.214184] systemd[1]: Starting Rule-based Manager for Device Events and Files...
  1165. Starting Rule-based Manage…for Device Events and Files...
  1166. [ 4.225791] systemd[1]: Mounted /tmp.
  1167. [ OK ] Mounted /tmp.
  1168. [ 4.228418] systemd[1]: Reached target Local File Systems.
  1169. [ OK ] Reached target Local File Systems.
  1170. [ 4.234781] systemd[1]: Starting Armbian ZRAM config...
  1171. Starting Armbian ZRAM config...
  1172. [ 4.242319] systemd[1]: Starting Set console font and keymap...
  1173. Starting Set console font and keymap...
  1174. [ 4.251054] systemd[1]: Starting Preprocess NFS configuration...
  1175. Starting Preprocess NFS configuration...
  1176. [ 4.252491] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
  1177. [ 4.253145] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
  1178. [ OK ] Finished Set console font and keymap.
  1179. [ OK ] Finished Preprocess NFS configuration.
  1180. [ OK ] Reached target NFS client services.
  1181. [ 4.287417] systemd[1]: Finished Set console font and keymap.
  1182. [ 4.289738] systemd[1]: nfs-config.service: Succeeded.
  1183. [ 4.291076] systemd[1]: Finished Preprocess NFS configuration.
  1184. [ 4.292589] systemd[1]: Condition check resulted in RPC security service for NFS client and server being skipped.
  1185. [ 4.292719] systemd[1]: Condition check resulted in RPC security service for NFS server being skipped.
  1186. [ 4.292842] systemd[1]: Reached target NFS client services.
  1187. [ OK ] Started Rule-based Manager for Device Events and Files.
  1188. [ 4.387946] systemd[1]: Started Rule-based Manager for Device Events and Files.
  1189. [ 4.470811] vendor storage:20190527 ret = -1
  1190. [ OK ] Finished Coldplug All udev Devices.
  1191. [ 4.571724] systemd[1]: Finished Coldplug All udev Devices.
  1192. [ 4.581162] systemd[1]: Starting Helper to synchronize boot up for ifupdown...
  1193. Starting Helper to synchronize boot up for ifupdown...
  1194. [ OK ] Finished Helper to synchronize boot up for ifupdown.
  1195. [ 4.620805] systemd[1]: Finished Helper to synchronize boot up for ifupdown.
  1196. [ 4.636370] systemd[1]: Starting Raise network interfaces...
  1197. Starting Raise network interfaces...
  1198. [ 4.704053] rk-pcie 3c0800000.pcie: PCIe Linking... LTSSM is 0x1
  1199. [ 4.704057] rk-pcie 3c0000000.pcie: PCIe Linking... LTSSM is 0x0
  1200. [ 4.738149] systemd[1]: armbian-zram-config.service: Main process exited, code=exited, status=1/FAILURE
  1201. [ 4.739017] systemd[1]: armbian-zram-config.service: Failed with result 'exit-code'.
  1202. [ 4.740397[FAILED] Failed to start ;1;39mArmbian ZRAM config. systemd[1]: Failed to start Armbian ZRAM config.
  1203.  
  1204. See 'systemctl status armbian-zram-config.service' for details.
  1205. [ 4.770828] systemd[1]: Starting Armbian memory supported logging...
  1206. Starting Armbian memory supported logging...
  1207. [ OK ] Found device /dev/ttyFIQ0.
  1208. [ 5.238999] systemd[1]: Found device /dev/ttyFIQ0.
  1209. [ 5.386543] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch when bootsplash is active being skipped.
  1210. [ 5.388705] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
  1211. [ 5.388968] systemd[1]: Reached target Hardware activated USB gadget.
  1212. [ OK ] Reached target Hardware activated USB gadget.
  1213. [ 5.394539] systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
  1214. [ 5.395617] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
  1215. [ OK ] Listening on Load/Save RF …itch Status /dev/rfkill Watch.
  1216. [ 5.406626] systemd[1]: Starting Armbian ZRAM config...
  1217. Starting Armbian ZRAM config...
  1218. [ 5.409071] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
  1219. [ 5.410860] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
  1220. [ 5.411594] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
  1221. [ 5.413506] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
  1222. [ 5.434484] systemd[1]: Starting Load/Save RF Kill Switch Status...
  1223. Starting Load/Save RF Kill Switch Status...
  1224. [ 5.519246] [BT_RFKILL]: bt shut off power
  1225. [ OK ] Started Load/Save RF Kill Switch Status.
  1226. [ 5.520038] systemd[1]: Started Load/Save RF Kill Switch Status.
  1227. [ 5.680416] systemd[1]: Finished Raise network interfaces.
  1228. [ OK ] Finished Raise network interfaces.
  1229. [ 5.717287] rk-pcie 3c0000000.pcie: PCIe Linking... LTSSM is 0x0
  1230. [ 5.717731] rk-pcie 3c0800000.pcie: PCIe Linking... LTSSM is 0x0
  1231. [ 5.941254] systemd[1]: armbian-zram-config.service: Main process exited, code=exited, status=1/FAILURE
  1232. [ 5.942094] systemd[1]: armbian-zram-config.service: Failed with result 'exit-code'.
  1233. [ 5.943034] systemd[1]: Failed to start Armbian ZRAM config.
  1234. [FAILED] Failed to start Armbian ZRAM config.
  1235. See 'systemctl status armbian-zram-config.service' for details.
  1236. [ 6.730938] rk-pcie 3c0000000.pcie: PCIe Linking... LTSSM is 0x0
  1237. [ 7.069955] systemd[1]: Finished Armbian memory supported logging.
  1238. [ OK ] Finished Armbian memory supported logging.
  1239. [ 7.076418] systemd[1]: Starting Journal Service...
  1240. Starting Journal Service...
  1241. [ 7.441769] systemd[1]: Started Journal Service.
  1242. [ OK ] Started Journal Service.
  1243. Starting Flush Journal to Persistent Storage...
  1244. [ 7.485269] systemd-journald[475]: Received client request to flush runtime journal.
  1245. [ 7.485726] systemd-journald[475]: File /var/log/journal/2bc8b2fd2a1b43dfaf427f1e877f6ccb/system.journal corrupted or uncleanly shut down, renaming and replacing.
  1246. [ OK ] Finished Flush Journal to Persistent Storage.
  1247. Starting Create Volatile Files and Directories...
  1248. [ OK ] Finished Create Volatile Files and Directories.
  1249. [ OK ] Started Entropy Daemon based on the HAVEGE algorithm.
  1250. Starting RPC bind portmap service...
  1251. Starting Update UTMP about System Boot/Shutdown...
  1252. [ OK ] Finished Update UTMP about System Boot/Shutdown.
  1253. [ OK ] Reached target System Initialization.
  1254. [ OK ] Started Daily Cleanup of Temporary Directories.
  1255. [ OK ] Listening on D-Bus System Message Bus Socket.
  1256. [ OK ] Reached target Sockets.
  1257. Starting Armbian hardware monitoring...
  1258. Starting Armbian hardware optimization...
  1259. [ OK ] Started RPC bind portmap service.
  1260. [ OK ] Reached target Remote File Systems (Pre).
  1261. [ OK ] Reached target Remote File Systems.
  1262. [ OK ] Reached target RPC Port Mapper.
  1263. [ OK ] Finished Armbian hardware monitoring.
  1264. [ 7.747415] rk-pcie 3c0800000.pcie: PCIe Linking... LTSSM is 0x1
  1265. [ 7.747438] rk-pcie 3c0000000.pcie: PCIe Linking... LTSSM is 0x0
  1266. [ 8.757354] rk-pcie 3c0000000.pcie: PCIe Linking... LTSSM is 0x0
  1267. [ 8.757412] rk-pcie 3c0800000.pcie: PCIe Linking... LTSSM is 0x0
  1268. [ 9.770668] rk-pcie 3c0800000.pcie: PCIe Linking... LTSSM is 0x0
  1269. [ 9.770776] rk-pcie 3c0000000.pcie: PCIe Linking... LTSSM is 0x0
  1270. [** ] A start job is running for Armbian …rdware optimization (6s / 2min 3s)
  1271. [ OK ] Finished Armbian hardware optimization.
  1272. [ OK ] Reached target Basic System.
  1273. Starting Save/Restore Sound Card State...
  1274. [ OK ] Started Regular background program processing daemon.
  1275. [ OK ] Started D-Bus System Message Bus.
  1276. Starting Network Manager...
  1277. Starting Remove Stale Onli…t4 Metadata Check Snapshots...
  1278. Starting LSB: Load kernel …d to enable cpufreq scaling...
  1279. Starting Dispatcher daemon for systemd-networkd...
  1280. Starting System Logging Service...
  1281. Starting Self Monitoring a…g Technology (SMART) Daemon...
  1282. Starting Resets System Activity Logs...
  1283. Starting User Login Management...
  1284. Starting WPA supplicant...
  1285. [ OK ] Finished Save/Restore Sound Card State.
  1286. [ OK ] Reached target Sound Card.
  1287. [ 11.515313] proc: unrecognized mount option "hidepid=invisible" or missing value
  1288. [ OK ] Finished Remove Stale Onli…ext4 Metadata Check Snapshots.
  1289. [ OK ] Finished Resets System Activity Logs.
  1290. [ 11.797371] rk-pcie 3c0000000.pcie: PCIe Link Fail
  1291. [ 11.797374] rk-pcie 3c0800000.pcie: PCIe Link Fail
  1292. [ 11.797394] rk-pcie 3c0800000.pcie: failed to initialize host
  1293. [ 11.797439] rk-pcie 3c0000000.pcie: failed to initialize host
  1294. [ OK ] Started System Logging Service.
  1295. [ OK ] Started WPA supplicant.
  1296. [ OK ] Started User Login Management.
  1297. [ OK ] Started LSB: Load kernel m…ded to enable cpufreq scaling.
  1298. Starting LSB: set CPUFreq kernel parameters...
  1299. [ OK ] Started Self Monitoring an…ing Technology (SMART) Daemon.
  1300. [ OK ] Started LSB: set CPUFreq kernel parameters.
  1301. Starting LSB: Set sysfs variables from /etc/sysfs.conf...
  1302. [ OK ] Started LSB: Set sysfs variables from /etc/sysfs.conf.
  1303. [ OK ] Started Network Manager.
  1304. [ OK ] Reached target Network.
  1305. [ OK ] Reached target Network is Online.
  1306. Starting chrony, an NTP client/server...
  1307. Starting LSB: Advanced IEEE 802.11 management daemon...
  1308. Starting OpenVPN service...
  1309. Starting /etc/rc.local Compatibility...
  1310. Starting OpenBSD Secure Shell server...
  1311. Starting Permit User Sessions...
  1312. [ OK ] Started Unattended Upgrades Shutdown.
  1313. [ OK ] Started vnStat network traffic monitor.
  1314. [ OK ] Started LSB: Advanced IEEE 802.11 management daemon.
  1315. [ OK ] Finished OpenVPN service.
  1316. [ OK ] Started /etc/rc.local Compatibility.
  1317. [ OK ] Finished Permit User Sessions.
  1318. [ OK ] Started Getty on tty1.
  1319. [ OK ] Started Serial Getty on ttyFIQ0.
  1320. [ OK ] Reached target Login Prompts.
  1321. Starting Hostname Service...
  1322. [ OK ] Started OpenBSD Secure Shell server.
  1323. [ OK ] Started chrony, an NTP client/server.
  1324. [ OK ] Reached target System Time Synchronized.
  1325. [ OK ] Started Daily apt download activities.
  1326. [ OK ] Started Daily apt upgrade and clean activities.
  1327. [ OK ] Started Periodic ext4 Onli…ata Check for All Filesystems.
  1328. [ OK ] Started Discard unused blocks once a week.
  1329. [ OK ] Started Daily rotation of log files.
  1330. [ OK ] Started Daily man-db regeneration.
  1331. [ OK ] Started Run system activit…ounting tool every 10 minutes.
  1332. [ OK ] Started Generate summary o…esterday's process accounting.
  1333. [ OK ] Reached target Timers.
  1334. [ 12.705623] proc: unrecognized mount option "hidepid=invisible" or missing value
  1335. [ OK ] Started Hostname Service.
  1336. Starting Network Manager Script Dispatcher Service...
  1337. [ 13.306042] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  1338. [ OK ] Started Dispatcher daemon for systemd-networkd.
  1339. [ 13.308731] Generic PHY stmmac-1:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=stmmac-1:00, irq=POLL)
  1340. [ OK ] Reached target Multi-User System.
  1341. [ OK ] Reached target Graphical Interface.
  1342. [ 13.333973] dwmac4: Master AXI performs any burst length
  1343. [ 13.334080] rk_gmac-dwmac fe010000.ethernet eth0: No Safety Features sup Starting Update UTMP about System Runlevel Changes...
  1344. port found
  1345. [ 13.334128] rk_gmac-dwmac fe010000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
  1346. [ 13.336064] rk_gmac-dwmac fe010000.ethernet eth0: registered PTP clock
  1347. [ 13.337285] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  1348. [ OK ] Started Network Manager Script Dispatcher Service.
  1349. [ OK ] Finished Update UTMP about System Runlevel Changes.
  1350. [ 13.438356] ttyFIQ ttyFIQ0: tty_port_close_start: tty->count = 1 port count = 2
  1351.  
  1352. Armbian 21.11.0-trunk Bullseye ttyFIQ0
  1353.  
  1354. rock-3a login: [ 23.478794] rk_gmac-dwmac fe010000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
  1355. [ 23.478936] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  1356. [ 32.063712] pcie30_3v3: disabling
  1357.  
RAW Paste Data