Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000@0] Initializing cgroup subsys cpuset
- [ 0.000000@0] Initializing cgroup subsys cpu
- [ 0.000000@0] Initializing cgroup subsys cpuacct
- [ 0.000000@0] Linux version 3.14.29 (chewitt@buildbox) (gcc version 6.2.0 (GCC) ) #1 SMP PREEMPT Wed Mar 22 17:26:49 GMT 2017
- [ 0.000000@0] CPU: AArch64 Processor [410fd034] revision 4
- [ 0.000000@0] fdt Reserved memory table:
- [ 0.000000@0] linux,meson-fb: 0x000000007e700000 - 0x0000000080000000 (25 MiB)
- [ 0.000000@0] linux,di: 0x000000007c900000 - 0x000000007e700000 (30 MiB)
- [ 0.000000@0] DI: DI reserved memory: created CMA memory pool at 0x000000007c900000, size 30 MiB
- [ 0.000000@0] linux,ion-dev: 0x000000007a900000 - 0x000000007c900000 (32 MiB)
- [ 0.000000@0] linux,ppmgr: 0x000000007a900000 - 0x000000007a900000 (0 MiB)
- [ 0.000000@0] linux,codec_mm_cma: 0x000000006e800000 - 0x000000007a800000 (192 MiB)
- [ 0.000000@0] linux,codec_mm_reserved: 0x000000006a700000 - 0x000000006e800000 (65 MiB)
- [ 0.000000@0] fdt Reserved memory total: 347 MiB
- [ 0.000000@0] cma: Reserved 8 MiB at 69c00000
- [ 0.000000@0] On node 0 totalpages: 513024
- [ 0.000000@0] Normal zone: 9032 pages used for memmap
- [ 0.000000@0] Normal zone: 0 pages reserved
- [ 0.000000@0] Normal zone: 513024 pages, LIFO batch:31
- [ 0.000000@0] psci: probing function IDs from device-tree
- [ 0.000000@0] PERCPU: Embedded 12 pages/cpu @ffffffc07a8a3000 s18368 r8192 d22592 u49152
- [ 0.000000@0] pcpu-alloc: s18368 r8192 d22592 u49152 alloc=12*4096
- [ 0.000000@0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
- [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 503992
- [ 0.000000@0] Kernel command line: console=tty0 boot=/dev/mmcblk0p1 disk=/dev/mmcblk0p2 no_console_suspend logo=osd1,loaded,0x3f800000,1080p60hz vout=1080p60hz,enable hdmimode=1080p60hz cvbsmode=nocvbs mac=00:1e:06:34:28:52 consoleblank=0 max_freq=1536 maxcpus=4 hdmitx=cec17 quiet
- [ 0.000000@0] logo: osd1
- [ 0.000000@0] logo: loaded
- [ 0.000000@0] logo: 0x3f800000
- [ 0.000000@0] logo: 1080p60hz
- [ 0.000000@0] vout_serve: 1080p60hz
- [ 0.000000@0] vout_serve: enable: 1
- [ 0.000000@0] logo: get hdmimode: 1080p60hz
- [ 0.000000@0] logo: get cvbsmode: nocvbs
- [ 0.000000@0] dvfs [get_max_freq] - max_freq : 1536000000
- [ 0.000000@0] hdmitx: cec: HDMI hdmi_cec_func_config:0x17
- [ 0.000000@0] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000@0] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
- [ 0.000000@0] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.000000@0] Memory: 1652808K/2052096K available (8672K kernel code, 813K rwdata, 3308K rodata, 3653K init, 5528K bss, 399288K reserved)
- [ 0.000000@0] Virtual kernel memory layout:
- [ 0.000000@0] vmalloc : 0xffffff8000000000 - 0xffffff8040000000 ( 1024 MB)
- [ 0.000000@0] vmemmap : 0xffffff8040010000 - 0xffffff804239f800 ( 35 MB)
- [ 0.000000@0] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
- [ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc07e700000 ( 2023 MB)
- [ 0.000000@0] .init : 0xffffffc001c35000 - 0xffffffc001fc67c0 ( 3654 kB)
- [ 0.000000@0] .text : 0xffffffc001080000 - 0xffffffc001c34184 ( 11985 kB)
- [ 0.000000@0] .data : 0xffffffc001fc7000 - 0xffffffc002092678 ( 814 kB)
- [ 0.000000@0] SLUB: HWalign=64, Order=0-1, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000@0] arch_multi_cluster:0
- [ 0.000000@0] Preemptible hierarchical RCU implementation.
- [ 0.000000@0] RCU debugfs-based tracing is enabled.
- [ 0.000000@0] NR_IRQS:64 nr_irqs:64 0
- [ 0.000000@0] Architected cp15 timer(s) running at 24.00MHz (phys).
- [ 0.000003@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns
- [ 0.000022@0] meson_bc_timer: mclk->mux_reg =ffffff800000c990,mclk->reg =ffffff800000e994
- [ 0.000214@0] Console: colour dummy device 80x25
- [ 0.000304@0] console [tty0] enabled
- [ 0.002643@0] allocated 8388608 bytes of page_cgroup
- [ 0.002647@0] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.002658@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
- [ 0.002665@0] pid_max: default: 32768 minimum: 301
- [ 0.002761@0] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.002767@0] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.004596@0] device-tree: Duplicate name in /efusekey, renamed to "key0#1"
- [ 0.004606@0] device-tree: Duplicate name in /efusekey, renamed to "key1#1"
- [ 0.004613@0] device-tree: Duplicate name in /efusekey, renamed to "key2#1"
- [ 0.004622@0] device-tree: Duplicate name in /efusekey, renamed to "key3#1"
- [ 0.006839@0] Initializing cgroup subsys debug
- [ 0.006847@0] Initializing cgroup subsys memory
- [ 0.006861@0] Initializing cgroup subsys devices
- [ 0.006866@0] Initializing cgroup subsys freezer
- [ 0.006872@0] Initializing cgroup subsys blkio
- [ 0.006876@0] Initializing cgroup subsys net_prio
- [ 0.006926@0] ftrace: allocating 29443 entries in 116 pages
- [ 0.032541@0] /cpus/cpu@0: Missing clock-frequency property
- [ 0.032557@0] /cpus/cpu@1: Missing clock-frequency property
- [ 0.032564@0] /cpus/cpu@2: Missing clock-frequency property
- [ 0.032571@0] /cpus/cpu@3: Missing clock-frequency property
- [ 0.073728@0] Meson chip version = RevC (1F:C - 0:0)
- [ 0.092896@1] CPU1: Booted secondary processor
- [ 0.112882@2] CPU2: Booted secondary processor
- [ 0.132890@3] CPU3: Booted secondary processor
- [ 0.132944@0] Brought up 4 CPUs
- [ 0.132955@0] SMP: Total of 4 processors activated.
- [ 0.133347@0] devtmpfs: initialized
- [ 0.145416@0] xor: measuring software checksum speed
- [ 0.242277@0] 8regs : 2933.600 MB/sec
- [ 0.342284@0] 8regs_prefetch: 2612.800 MB/sec
- [ 0.442308@0] 32regs : 3468.000 MB/sec
- [ 0.542334@0] 32regs_prefetch: 2941.600 MB/sec
- [ 0.542338@0] xor: using function: 32regs (3468.000 MB/sec)
- [ 0.542347@0] pinctrl core: initialized pinctrl subsystem
- [ 0.542552@0] regulator-dummy: no parameters
- [ 0.542881@0] NET: Registered protocol family 16
- [ 0.543701@0] aml_vdac_init: module init
- [ 0.543740@0] register canvas platform driver
- [ 0.543760@0] register rdma platform driver
- [ 0.544272@0] vdso: 2 pages (1 code, 1 data) at base ffffffc001fce000
- [ 0.544514@0] DMA: preallocated 256 KiB pool for atomic allocations
- [ 0.545705@0] software IO TLB [mem 0x65800000-0x65c00000] (4MB) mapped at [ffffffc065800000-ffffffc065bfffff]
- [ 0.545774@0] aml_i2c version: 20140813
- [ 0.545808@0] codec_mm:codec_mm_module_init
- [ 0.545972@0] gxbb_mpll_clk: register mpll_clk_out0 success done
- [ 0.545979@0] gxbb_mpll_clk: register mpll_clk_out1 success done
- [ 0.545985@0] gxbb_mpll_clk: register mpll_clk_out2 success done
- [ 0.546171@0] clk_sys: register PLL sys_pll success done
- [ 0.546210@0] gxbb_clk: [ xtal ] ->clockrate: 24000000Hz
- [ 0.546214@0] gxbb_clk: [ 32Khz ] ->clockrate: 32000Hz
- [ 0.546219@0] gxbb_clk: [ clk81 ] ->clockrate: 166666666Hz
- [ 0.546223@0] gxbb_clk: [ fixed_pll ] ->clockrate: 2000000000Hz
- [ 0.546227@0] gxbb_clk: [ fclk_div2 ] ->clockrate: 1000000000Hz
- [ 0.546231@0] gxbb_clk: [ fclk_div3 ] ->clockrate: 666666666Hz
- [ 0.546234@0] gxbb_clk: [ fclk_div4 ] ->clockrate: 500000000Hz
- [ 0.546238@0] gxbb_clk: [ fclk_div5 ] ->clockrate: 400000000Hz
- [ 0.546241@0] gxbb_clk: [ fclk_div7 ] ->clockrate: 285714285Hz
- [ 0.546266@0] gxbb_clk: clock initialization complete
- [ 0.546403@0] clkmsr: msr_clk_reg0=ffffff800005c75c,msr_clk_reg2=ffffff800005e764
- [ 0.547529@0] aml_iomap: amlogic iomap probe done
- [ 0.547747@0] pinmux-gxbb c1109880.pinmux: Init pinux probe!
- [ 0.548491@0] pinmux-gxbb c1109880.pinmux: Probed amlogic pinctrl driver
- [ 0.549054@0] aml-i2c c1108500.i2c: add adapter aml_i2c_adap1(ffffffc065c3c0e0)
- [ 0.549378@0] dvfs [scpi_dvfs_get_opps] - new count 6, max_freq 1536000000
- [ 0.550340@0] codec_mm has 2 memory regions
- [ 0.550357@0] codec_mm codec_mm.17: assigned reserved memory node linux,codec_mm_cma ok
- [ 0.550365@0] codec_mm codec_mm.17: assigned reserved memory node linux,codec_mm_reserved ok
- [ 0.550391@0] codec_mm has 2 memory regions
- [ 0.550399@0] codec_mm codec_mm.17: assigned reserved memory node linux,codec_mm_cma ok
- [ 0.550406@0] codec_mm codec_mm.17: assigned reserved memory node linux,codec_mm_reserved ok
- [ 0.551056@0] vpu: driver version: v02
- [ 0.551068@0] vpu: load vpu_clk: 666667000Hz(7)
- [ 0.551093@0] vpu: vpu_probe OK
- [ 0.551388@0] tv_vout: tvout_probe
- [ 0.551396@0] tv_vout: major number 254 for disp
- [ 0.551409@0] vout_notify: vout_register_server
- [ 0.551413@0] tv_vout: register tv module server ok
- [ 0.551433@0] tv_vout: tvout_probe OK
- [ 0.551597@0] canvas_probe reg=00000000c8838000,size=400
- [ 0.551606@0] canvas maped reg_base =ffffff800019c000
- [ 0.554814@0] rdma_probe
- [ 0.664980@0] bio: create slab <bio-0> at 0
- [ 0.832597@0] raid6: int64x1 533 MB/s
- [ 1.002566@0] raid6: int64x2 848 MB/s
- [ 1.172647@0] raid6: int64x4 1268 MB/s
- [ 1.342668@0] raid6: int64x8 1413 MB/s
- [ 1.512752@0] raid6: neonx1 935 MB/s
- [ 1.682794@0] raid6: neonx2 1501 MB/s
- [ 1.852849@0] raid6: neonx4 1937 MB/s
- [ 2.022915@0] raid6: neonx8 2034 MB/s
- [ 2.022919@0] raid6: using algorithm neonx8 (2034 MB/s)
- [ 2.022923@0] raid6: using intx1 recovery algorithm
- [ 2.023160@0] SCSI subsystem initialized
- [ 2.023303@0] usbcore: registered new interface driver usbfs
- [ 2.023334@0] usbcore: registered new interface driver hub
- [ 2.023387@0] usbcore: registered new device driver usb
- [ 2.023425@0] Linux video capture interface: v2.00
- [ 2.023467@0] pps_core: LinuxPPS API ver. 1 registered
- [ 2.023471@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 2.023483@0] PTP clock support registered
- [ 2.023575@0] hdmitx: system: amhdmitx_init
- [ 2.023578@0] hdmitx: system: Ver: 2014May6
- [ 2.023690@0] hdmitx: system: amhdmitx_probe
- [ 2.023857@1] hdmitx: system: not find match init-data
- [ 2.023862@1] hdmitx: system: not find match pwr-ctl
- [ 2.023867@1] hdmitx hpd irq = 89
- [ 2.024094@1] hdmitx20: Mapped PHY: 0xc0800000
- [ 2.024104@1] hdmitx20: Mapped PHY: 0xc1104400
- [ 2.024121@1] hdmitx20: Mapped PHY: 0xc8100000
- [ 2.024126@1] hdmitx20: Mapped PHY: 0xc8834000
- [ 2.024131@1] hdmitx20: Mapped PHY: 0xc883a000
- [ 2.024135@1] hdmitx20: Mapped PHY: 0xc883c000
- [ 2.024142@1] hdmitx20: Mapped PHY: 0xd0100000
- [ 2.024147@1] hdmitx20: Mapped PHY: 0xda83a000
- [ 2.024157@1] hdmitx: alread display in uboot 0x10
- [ 2.024178@1] avmute set to 1
- [ 2.024276@1] vout_serve: vout_init_module
- [ 2.024340@1] tv_vout: tv_set_current_vmode[764]fps_target_mode=16
- [ 2.024345@1] tv_vout: mode is 16,sync_duration_den=1,sync_duration_num=60
- [ 2.024353@1] tv_vout: already display in uboot
- [ 2.024356@1] vout_serve: vinfo mode is: 1080p60hz
- [ 2.024360@1] vout_serve: init mode 1080p60hz
- [ 2.024378@1] vout_serve: create vout attribute OK
- [ 2.024382@1] vout_serve: meson_vout_probe OK
- [ 2.024432@1] logo: logo_init
- [ 2.024567@1] osd_rdma: osd_rdma_init: rdma_table p=0x69c41000,op=0x69c41000 , v=0xffffff80001b1000
- [ 2.024571@1] osd_rdma: osd rdma request irq as second interrput function!
- [ 2.024681@1] Advanced Linux Sound Architecture Driver Initialized.
- [ 2.025592@1] Switched to clocksource arch_sys_counter
- [ 2.048003@1] NET: Registered protocol family 2
- [ 2.048344@1] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
- [ 2.048431@1] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
- [ 2.048616@1] TCP: Hash tables configured (established 16384 bind 16384)
- [ 2.048678@1] TCP: reno registered
- [ 2.048686@1] UDP hash table entries: 1024 (order: 3, 32768 bytes)
- [ 2.048721@1] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
- [ 2.048878@1] NET: Registered protocol family 1
- [ 2.049052@1] RPC: Registered named UNIX socket transport module.
- [ 2.049056@1] RPC: Registered udp transport module.
- [ 2.049060@1] RPC: Registered tcp transport module.
- [ 2.049063@1] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 2.122755@1] futex hash table entries: 1024 (order: 4, 65536 bytes)
- [ 2.122818@1] audit: initializing netlink subsys (disabled)
- [ 2.122848@1] audit: type=2000 audit(2.100:1): initialized
- [ 2.126989@1] VFS: Disk quotas dquot_6.5.2
- [ 2.127122@1] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 2.128031@1] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 2.128950@1] NFS: Registering the id_resolver key type
- [ 2.128978@1] Key type id_resolver registered
- [ 2.128982@1] Key type id_legacy registered
- [ 2.128992@1] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
- [ 2.129516@1] msgmni has been set to 3628
- [ 2.130339@1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
- [ 2.130392@1] io scheduler noop registered
- [ 2.130396@1] io scheduler deadline registered
- [ 2.130416@1] io scheduler cfq registered (default)
- [ 2.130995@1] meson-rng c8834000.rng: hwrng registered
- [ 2.131078@1] [drm] Initialized drm 1.1.0 20060810
- [ 2.132941@1] loop: module loaded
- [ 2.132947@1] Loading iSCSI transport class v2.0-870.
- [ 2.133133@1] iscsi: registered transport (tcp)
- [ 2.133437@1] mtdoops: mtd device (mtddev=name/number) must be supplied
- [ 2.133998@1] tun: Universal TUN/TAP device driver, 1.6
- [ 2.134002@1] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 2.137398@1] libphy: stmmac: probed
- [ 2.137405@1] eth0: PHY ID 001cc916 at 0 IRQ POLL (stmmac-0:00) active
- [ 2.137410@1] eth0: PHY ID 001cc916 at 7 IRQ POLL (stmmac-0:07)
- [ 2.137610@1] PPP generic driver version 2.4.2
- [ 2.137694@1] NET: Registered protocol family 24
- [ 2.137744@1] usbcore: registered new interface driver smsc95xx
- [ 2.137781@1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 2.137786@1] ehci-h20ahb: H20AHB-EHCI Host Controller driver
- [ 2.137873@1] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 2.137925@1] usbcore: registered new interface driver cdc_acm
- [ 2.137929@1] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
- [ 2.137965@1] usbcore: registered new interface driver usb-storage
- [ 2.138039@1] usbcore: registered new interface driver usbserial
- [ 2.138060@1] usbcore: registered new interface driver usbserial_generic
- [ 2.138082@1] usbserial: USB Serial support registered for generic
- [ 2.138102@1] usbcore: registered new interface driver pl2303
- [ 2.138123@1] usbserial: USB Serial support registered for pl2303
- [ 2.138226@1] mousedev: PS/2 mouse device common for all mice
- [ 2.138308@1] i2c /dev entries driver
- [ 2.138888@1] ledtrig-cpu: registered to indicate activity on CPUs
- [ 2.138929@1] hidraw: raw HID events driver (C) Jiri Kosina
- [ 2.139483@1] usbcore: registered new interface driver usbhid
- [ 2.139487@1] usbhid: USB HID core driver
- [ 2.139599@1] meson_uart c81004c0.serial: ==uart0 reg addr = ffffff80001da4c0
- [ 2.139618@1] c81004c0.serial: ttyS0 at MMIO 0xc81004c0 (irq = 225, base_baud = 1500000) is a meson_uart
- [ 2.139794@1] meson_uart c11084c0.serial: ==uart1 reg addr = ffffff80001dc4c0
- [ 2.139807@1] c11084c0.serial: ttyS1 at MMIO 0xc11084c0 (irq = 58, base_baud = 1500000) is a meson_uart
- [ 2.140012@1] dwc_otg dwc2_b: dwc_otg_driver_probe(ffffffc065caf800)
- [ 2.180057@1] dwc_otg: usb1: type: 1 speed: 0, config: 0, dma: 0, id: 1, phy: c0000020, ctrl: 0
- [ 2.180077@1] dwc_otg dwc2_b: base=0xffffff8001600000
- [ 2.180082@1] dwc_otg dwc2_b: dwc_otg_device=0xffffffc065f8fe00
- [ 2.682762@1] dwc_otg: Core Release: 3.10a
- [ 2.682772@1] dwc_otg: Setting default values for core params
- [ 2.682785@1] dwc_otg: curmode: 1, host_only: 1
- [ 2.682797@1] dwc_otg dwc2_b: DMA config: BURST_DEFAULT
- [ 2.694967@1] dwc_otg: Using Buffer DMA mode
- [ 2.694972@1] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1
- [ 2.694976@1] dwc_otg: Working on port type = HOST
- [ 2.695228@1] dwc_otg dwc2_b: DWC OTG Controller
- [ 2.695246@1] dwc_otg dwc2_b: new USB bus registered, assigned bus number 1
- [ 2.695263@1] dwc_otg dwc2_b: irq 63, io mem 0x00000000
- [ 2.695267@1] dwc_otg: -------hcd->flags.d32 = 0
- [ 2.695289@1] dwc_otg: Init: Port Power? op_state=1
- [ 2.695293@1] dwc_otg: Init1: Power Port (0)
- [ 2.695446@1] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 2.695453@1] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.695457@1] usb usb1: Product: DWC OTG Controller
- [ 2.695462@1] usb usb1: Manufacturer: Linux 3.14.29 dwc_otg_hcd
- [ 2.695467@1] usb usb1: SerialNumber: dwc2_b
- [ 2.695775@1] hub 1-0:1.0: USB hub found
- [ 2.695795@1] hub 1-0:1.0: 1 port detected
- [ 2.695925@1] dwc_otg dwc2_a: dwc_otg_driver_probe(ffffffc065cafc00)
- [ 2.695962@1] dwc_otg: usb0: type: 0 speed: 0, config: 0, dma: 0, id: 0, phy: c0000000, ctrl: 0
- [ 2.695977@1] dwc_otg dwc2_a: base=0xffffff8001680000
- [ 2.695982@1] dwc_otg dwc2_a: dwc_otg_device=0xffffffc065f84e00
- [ 2.707565@1] dwc_otg: Core Release: 3.10a
- [ 2.707571@1] dwc_otg: Setting default values for core params
- [ 2.707582@1] dwc_otg: curmode: 1, host_only: 0
- [ 2.717605@1] dwc_otg dwc2_a: DMA config: BURST_DEFAULT
- [ 2.729766@1] dwc_otg: Using Buffer DMA mode
- [ 2.729771@1] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1
- [ 2.729775@1] dwc_otg: Working on port type = OTG
- [ 2.729778@1] dwc_otg: Current port type: SLAVE
- [ 2.729932@1] dwc_otg dwc2_a: DWC OTG Controller
- [ 2.729953@1] dwc_otg dwc2_a: new USB bus registered, assigned bus number 2
- [ 2.729971@1] dwc_otg dwc2_a: irq 62, io mem 0x00000000
- [ 2.730048@1] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- [ 2.730054@1] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.730059@1] usb usb2: Product: DWC OTG Controller
- [ 2.730064@1] usb usb2: Manufacturer: Linux 3.14.29 dwc_otg_hcd
- [ 2.730068@1] usb usb2: SerialNumber: dwc2_a
- [ 2.730331@1] hub 2-0:1.0: USB hub found
- [ 2.730348@1] hub 2-0:1.0: 1 port detected
- [ 2.730454@1] dwc_otg: Dedicated Tx FIFOs mode
- [ 2.730700@1] dwc_otg: using timer detectid change, ffffffc065f89800
- [ 2.730894@1] hdmitx: system: hdmitx_hdcp_init
- [ 2.730989@1] ESM HLD: Initializing...
- [ 2.730993@1] ESM HLD: Registering device range 'esm'...
- [ 2.731001@1] ESM HLD: Device range 'esm' has been registered.
- [ 2.731005@1] ESM HLD: Creating class /sys/class/elliptic...
- [ 2.731021@1] ESM HLD: The class /sys/class/elliptic has been created.
- [ 2.731025@1] ESM HLD: Creating device 'esm'...
- [ 2.731095@1] ESM HLD: Device 'esm' has been created.
- [ 2.731099@1] ESM HLD: Done initializing the HLD driver.
- [ 2.741252@1] BLASTER Driver Init
- [ 2.741365@1] secmon has 1 memory regions
- [ 2.741397@1] secmon: share in base: 0xffffff8000402000, share out base: 0xffffff8000404000
- [ 2.741405@1] secmon secmon.4: assigned reserved memory node linux,secmon ok
- [ 2.741408@1] secmon: probe done
- [ 2.741502@1] storage: storage in base: 0xffffff8001700000
- [ 2.741506@1] storage: storage out base: 0xffffff8001780000
- [ 2.741509@1] storage: storage block base: 0xffffff8001800000
- [ 2.741512@1] storage: probe done!
- [ 2.742027@1] aml_sd_emmc_probe: line 3558
- [ 2.742032@1] mmc driver version: 1.07, 2015-01-21: fix a bug in tuning which caused eMMC data CRC error
- [ 2.743458@1] aml_sd_emmc_reg_init 1146
- [ 2.743551@1] get property: ocr_avail, value:0x00200080
- [ 2.743556@1] get property: f_min, value:400000
- [ 2.743560@1] get property: f_max, value:100000000
- [ 2.743565@1] get property: max_req_size, value:0x00020000
- [ 2.743569@1] get property: irq_in, value:3
- [ 2.743573@1] get property: irq_out, value:5
- [ 2.743590@1] get property: gpio_cd, str:
- [ 2.743596@1] get property: pinname, str:sd
- [ 2.743601@1] get property: jtag_pin, str:
- [ 2.743606@1] get property: vol_switch, str:
- [ 2.743610@1] get property: vol_switch_18, value:1
- [ 2.743614@1] get property: vol_switch_delay, value:150
- [ 2.743618@1] get property: card_type, value:5
- [ 2.743624@1] get property: gpio_dat3, str:
- [ 2.743636@1] sd:pdata->caps = 7
- [ 2.743639@1] sd:pdata->caps2 = 0
- [ 2.776755@1] [aml_is_card_insert] card IN
- [ 2.795604@2] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
- [ 2.795644@2] aml_sd_emmc_probe: line 3558
- [ 2.807052@2] aml_sd_emmc_reg_init 1146
- [ 2.807147@2] get property: ocr_avail, value:0x00200080
- [ 2.807152@2] get property: f_min, value:400000
- [ 2.807156@2] get property: f_max, value:100000000
- [ 2.807160@2] get property: max_req_size, value:0x00020000
- [ 2.807168@2] get property: pinname, str:emmc
- [ 2.807174@2] get property: card_type, value:1
- [ 2.807178@2] get property: tx_phase, value:0
- [ 2.807193@2] get property: gpio_dat3, str:
- [ 2.807198@2] get property: hw_reset, str:
- [ 2.807221@2] emmc:pdata->caps = c0000d47
- [ 2.807230@2] emmc:pdata->caps2 = 8021
- [ 2.807247@2] storage 0, boot 4
- [ 2.807250@2] warning you may need update your uboot!
- [ 2.807262@2] get_storage_dev return 0
- [ 2.807365@3] [aml_sd_emmc_probe] aml_sd_emmc_probe() fail!
- [ 2.807566@3] ion_dev has 1 memory regions
- [ 2.877950@1] normal card in
- [ 2.880078@3] fb: osd_init_module
- [ 2.880145@3] fb: viu vsync irq: 35
- [ 2.880152@3] meson-fb has 1 memory regions
- [ 2.880177@3] meson-fb meson-fb.14: assigned reserved memory node linux,meson-fb ok
- [ 2.880190@3] fb: osd_probe vinfo:ffffffc002061ef0
- [ 2.880195@3] fb: init fbdev bpp is:32
- [ 2.890123@0] fb: osd probe OK
- [ 2.890200@0] ge2d: ge2d_init_module
- [ 2.890209@0] ge2d: ge2d_dev major:245
- [ 2.890355@0] ge2d: ge2d clock is 400 MHZ
- [ 2.890361@0] ge2d: ge2d: pdev=ffffffc065c3ba00, irq=182, rstc=0xffffffc065ff4340, clk=ffffffc065c2bb00
- [ 2.890390@0] ge2d: mapped phy: 0xd0160000
- [ 2.890397@0] ge2d: ge2d start monitor
- [ 2.890515@0] codec:Amlogic A/V streaming port init
- [ 2.890607@0] ge2d: ge2d workqueue monitor start
- [ 2.891138@0] codec:get gate demux control ok ffffffc065ff7c40
- [ 2.891144@0] codec:get gate parser_top control ok ffffffc065ff7cc0
- [ 2.891150@0] codec:get gate vpu_intr control ok ffffffc065ff7d40
- [ 2.891158@0] codec:get gate vdec control ok ffffffc065ff7dc0
- [ 2.891323@0] codec:[tsync_pcr_init]init success.
- [ 2.891326@0] codec:amvideocap_init_module
- [ 2.891382@0] codec:amvideocap_probe,amvideocap
- [ 2.891386@0] codec:use cma buf.
- [ 2.891390@0] codec:amvideocap_dev_register
- [ 2.891862@0] amvenc_avc_probe -- reserved memory config fail.
- [ 2.891866@0] amvenc_avc - cma memory pool size: 40 MB
- [ 2.891881@0] encode_wq_init.
- [ 2.891887@0] encode start monitor.
- [ 2.891964@0] encode workqueue monitor start.
- [ 2.892037@0] jpegenc module init
- [ 2.892133@0] codec:picdec_driver_probe called.
- [ 2.892137@0] picdec has 1 memory regions
- [ 2.892157@0] codec:picdec_driver_probe done.
- [ 2.892561@0] codec:create_ge2d_work_queue video task ok
- [ 2.892742@0] codec:register clk_set_setting cpu[31]
- [ 2.892992@0] DI: di_module_init ok.
- [ 2.893001@0] DI: di_module_init: major 239
- [ 2.893124@0] DI: di_probe
- [ 2.893231@0] deinterlace has 1 memory regions
- [ 2.893259@0] DI: di reveser memory 0x7c900000, size 30MB.
- [ 2.893268@0] deinterlace deinterlace.26: assigned reserved memory node linux,di ok
- [ 2.893287@0] di_irq:78,timerc_irq:38
- [ 2.893582@0] rdma_register, rdma_table_addr ffffff800041a000 rdma_table_addr_phy 69c4a000 reg_buf ffffffc065002000
- [ 2.893587@0] rdma_register success, handle 1 table_size 8192
- [ 2.893591@0] DI: di_probe allocate rdma channel 1.
- [ 2.893596@0] DI: DI hw version 2.
- [ 2.893608@0] 0x000000db:Y=db,U=0,V=0
- [ 2.893612@0] 0x000000dc:Y=dc,U=0,V=0
- [ 2.893615@0] 0x000000dd:Y=dd,U=0,V=0
- [ 2.893618@0] 0x000000de:Y=de,U=0,V=0
- [ 2.893622@0] 0x000000df:Y=df,U=0,V=0
- [ 2.893625@0] 0x000000e0:Y=e0,U=0,V=0
- [ 2.893629@0] 0x000000e1:Y=e1,U=0,V=0
- [ 2.893632@0] 0x000000e2:Y=e2,U=0,V=0
- [ 2.893636@0] 0x000000e3:Y=e3,U=0,V=0
- [ 2.893639@0] 0x000000f0:Y=f0,U=0,V=0
- [ 2.893644@0] 0x000000f1:Y=f1,U=0,V=0
- [ 2.893648@0] 0x000000f2:Y=f2,U=0,V=0
- [ 2.893651@0] 0x000000f3:Y=f3,U=0,V=0
- [ 2.893655@0] 0x000000f4:Y=f4,U=0,V=0
- [ 2.893658@0] 0x000000f5:Y=f5,U=0,V=0
- [ 2.893662@0] 0x000000f6:Y=f6,U=0,V=0
- [ 2.893666@0] 0x000000f7:Y=f7,U=0,V=0
- [ 2.893670@0] 0x000000f8:Y=f8,U=0,V=0
- [ 2.893673@0] 0x000000f9:Y=f9,U=0,V=0
- [ 2.893676@0] 0x000000fa:Y=fa,U=0,V=0
- [ 2.893680@0] 0x000000fb:Y=fb,U=0,V=0
- [ 2.893683@0] 0x000000fc:Y=fc,U=0,V=0
- [ 2.893780@0] DI: di_probe here.
- [ 2.893937@0] efusekeynum: 4
- [ 2.893947@0] efusekeyname: mac offset: 0 size: 6
- [ 2.893953@0] efusekeyname: mac_bt offset: 6 size: 6
- [ 2.893960@0] efusekeyname: mac_wifi offset: 12 size: 6
- [ 2.893966@0] efusekeyname: usid offset: 18 size: 16
- [ 2.894063@0] efuse efuse.10: probe OK!
- [ 2.894192@0] 6aml_unifykeys_init done!
- [ 2.894196@0] PPMGRDRV: warn: ppmgr module init func called
- [ 2.894239@0] PPMGRDRV: err: ppmgr_driver_probe called
- [ 2.894251@0] ppmgr has 1 memory regions
- [ 2.894269@0] PPMGRDRV: info: ppmgr_dev major:237
- [ 2.894358@0] PPMGRDRV: info: ppmgr_probe done
- [ 2.894459@0] audio_dsp: [dsp]register dsp to char divece(257)
- [ 2.894725@0] amaudio: amaudio: driver amaudio succuess!
- [ 2.894730@0] amlvid:err: amlvideo_init called
- [ 2.894738@0] amlvid:err: amlvideo_create_instance called
- [ 2.894747@0] amlvid:err: v4l2_dev.name=:amlvideo-000
- [ 2.894830@0] amlvideo-000: V4L2 device registered as video10
- [ 2.894915@0] [RX]-hdmirx: hdmirx_init.
- [ 2.894919@0] ESM HLD: Initializing...
- [ 2.894922@0] ESM HLD: Registering device range 'esm_rx'...
- [ 2.894928@0] ESM HLD: Device range 'esm_rx' has been registered.
- [ 2.894932@0] ESM HLD: Creating class /sys/class/elliptic_rx...
- [ 2.894945@0] ESM HLD: The class /sys/class/elliptic_rx has been created.
- [ 2.894948@0] ESM HLD: Creating device 'esm_rx'...
- [ 2.895001@0] ESM HLD: Device 'esm_rx' has been created.
- [ 2.895005@0] ESM HLD: Done initializing the HLD driver.
- [ 2.895096@0] saradc c1108680.saradc: initialized by BL30
- [ 2.895108@0] saradc c1108680.saradc: calibration start:
- [ 2.895151@0] saradc c1108680.saradc: nominal=0, value=1
- [ 2.895192@0] saradc c1108680.saradc: nominal=256, value=252
- [ 2.895233@0] saradc c1108680.saradc: nominal=512, value=507
- [ 2.895275@0] saradc c1108680.saradc: nominal=768, value=765
- [ 2.895316@0] saradc c1108680.saradc: nominal=1023, value=1019
- [ 2.895321@0] saradc c1108680.saradc: calibration end: coef=4088
- [ 2.895362@0] remote: Driver init
- [ 2.895482@0] m1-adckp adc_keypad.42: adc_key: faild to get name_len!
- [ 2.895506@0] m1-adckp adc_keypad.42: menu key(139) registed.
- [ 2.895511@0] m1-adckp adc_keypad.42: vol- key(114) registed.
- [ 2.895516@0] m1-adckp adc_keypad.42: vol+ key(115) registed.
- [ 2.895520@0] m1-adckp adc_keypad.42: esc key(1) registed.
- [ 2.895526@0] m1-adckp adc_keypad.42: home key(102) registed.
- [ 2.895651@0] input: adc_keypad as /devices/adc_keypad.42/input/input0
- [ 2.895858@0] gpio-key gpio_keypad.41: gpio_key: 0 name(power) pin()
- [ 2.895864@0] gpio-key gpio_keypad.41: amlogic_gpio_name_map_num pin 0!::
- [ 2.895874@0] gpio-key gpio_keypad.41: gpio_key: 0 power(125)
- [ 2.895896@0] gpio-key gpio_keypad.41: start setup_timer
- [ 2.895902@0] gpio-key gpio_keypad.41: power key(116) registed.
- [ 2.895987@0] input: gpio_keypad as /devices/gpio_keypad.41/input/input1
- [ 2.896050@0] gpio-key gpio_keypad.41: gpio keypad register input device completed.
- [ 2.896057@0] input input1: gpio keypad major:234
- [ 2.896305@0] cpuinfo: probe done
- [ 2.896646@0] input: cec_input as /devices/virtual/input/input2
- [ 2.896784@0] cectx c810023c.aocec: aml_cec_probe(): no hdmirx reg resource
- [ 2.896798@0] cectx c810023c.aocec: aml_cec_probe(): no hhi reg resource
- [ 2.896853@0] cectx c810023c.aocec: aml_cec_probe(): can't find hdmirx
- [ 2.897994@0] cec: wake up flag:0
- [ 2.898201@0] usbcore: registered new interface driver snd-usb-audio
- [ 2.899287@0] aml_pcm_dai: pcm mode detection =1
- [ 2.899805@0] aml_snd_card: headphone detection disable=1
- [ 2.899810@0] aml_snd_card: no spk event delay time set
- [ 2.901736@0] aml_snd_m8_card aml_m8_snd.40: dummy <-> I2S.33 mapping ok
- [ 2.903622@0] aml_snd_m8_card aml_m8_snd.40: dit-hifi <-> SPDIF.34 mapping ok
- [ 2.903737@0] aml_pcm: enter aml_pcm_new dai->name: PCM.35 dai->id: 0
- [ 2.904121@0] aml_snd_m8_card aml_m8_snd.40: pcm2bt-pcm <-> PCM.35 mapping ok
- [ 2.907218@0] aml_snd_card: audio use jtag pinmux as i2s output, read val =ffffffff
- [ 2.911421@0] TCP: cubic registered
- [ 2.911757@0] NET: Registered protocol family 10
- [ 2.912269@0] NET: Registered protocol family 17
- [ 2.912320@0] Key type dns_resolver registered
- [ 2.912906@0] Registering SWP/SWPB emulation handler
- [ 2.913150@0] registered taskstats version 1
- [ 2.913761@0] bio: create slab <bio-1> at 1
- [ 2.914220@0] Btrfs loaded
- [ 2.914286@0] BTRFS: selftest: Running btrfs free space cache tests
- [ 2.914290@0] BTRFS: selftest: Running extent only tests
- [ 2.914307@0] BTRFS: selftest: Running bitmap only tests
- [ 2.914322@0] BTRFS: selftest: Running bitmap and extent tests
- [ 2.914342@0] BTRFS: selftest: Free space cache tests finished
- [ 2.914346@0] BTRFS: selftest: Running extent buffer operation tests
- [ 2.914349@0] BTRFS: selftest: Running btrfs_split_item tests
- [ 2.914387@0] BTRFS: selftest: Running find delalloc tests
- [ 2.975790@1] dwc_otg: Indeed it is in host mode hprt0 = 00021501
- [ 2.995726@0] input input1: key 116 down
- [ 3.155687@1] usb 1-1: new high-speed USB device number 2 using dwc_otg
- [ 3.155943@0] dwc_otg: Indeed it is in host mode hprt0 = 00001101
- [ 3.157117@1] BTRFS: selftest: Running btrfs_get_extent tests
- [ 3.157275@1] BTRFS: selftest: Running hole first btrfs_get_extent test
- [ 3.200920@1] sd: new high speed SDHC card at address aaaa
- [ 3.200925@1] sd: clock 50000000, 4-bit-bus-width
- [ 3.200925@1]
- [ 3.201228@1] mmcblk0: sd:aaaa SL08G 7.40 GiB
- [ 3.211139@1] mmcblk0: p1 p2
- [ 3.275673@1] regulator-dummy: disabling
- [ 3.275760@1] console [netcon0] enabled
- [ 3.275764@1] netconsole: network logging started
- [ 3.275770@1] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
- [ 3.276686@1] cpufreq-scpi cpufreq-meson.7: enter cpufreq
- [ 3.276715@1] cpufreq-scpi cpufreq-meson.7: probe cpufreq okay
- [ 3.277786@0] gxbb_pm: enter meson_pm_probe!
- [ 3.277815@0] gxbb_pm: meson_pm_probe done
- [ 3.278152@0] cpucore_cooling_register, max_cpu_core_num:4
- [ 3.285803@0] ALSA device list:
- [ 3.285807@0] #0: AML-M8AUDIO
- [ 3.287524@0] Freeing unused kernel memory: 3652K (ffffffc001c35000 - ffffffc001fc6000)
- [ 3.309673@3] fb: osd[0] enable: 1 (platform_init)
- [ 3.356892@0] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610
- [ 3.356900@0] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
- [ 3.356905@0] usb 1-1: Product: USB2.0 Hub
- [ 3.357404@1] hub 1-1:1.0: USB hub found
- [ 3.357690@1] hub 1-1:1.0: 4 ports detected
- [ 3.375110@1] fb: Frame buffer memory assigned at
- [ 3.375122@1] fb: 0, phy: 0x000000007e700000, vir:0xffffff8001a80000, size=24576K
- [ 3.375122@1]
- [ 3.375131@1] fb: ---------------clear fb0 memory ffffff8001a80000
- [ 3.388722@1] fb: osd[0] canvas.idx =0x40
- [ 3.388726@1] fb: osd[0] canvas.addr=0x7e700000
- [ 3.388729@1] fb: osd[0] canvas.width=7680
- [ 3.388733@1] fb: osd[0] canvas.height=2160
- [ 3.388736@1] fb: osd[0] frame.width=1920
- [ 3.388739@1] fb: osd[0] frame.height=1080
- [ 3.391569@1] fb: Frame buffer memory assigned at
- [ 3.391580@1] fb: 1, phy: 0x000000007ff00000, vir:0xffffff8003300000, size=1024K
- [ 3.391580@1]
- [ 3.391588@1] fb: fb1 open, logo index:1
- [ 3.391939@3] vfm_map_store:rm default
- [ 3.391939@3]
- [ 3.391992@3] vfm_map_store:add default decoder ppmgr deinterlace amvideo
- [ 3.391992@3]
- [ 3.423477@3] Console: switching to colour frame buffer device 240x67
- [ 3.635971@1] usb 1-1.2: new high-speed USB device number 3 using dwc_otg
- [ 3.773763@1] usb 1-1.2: New USB device found, idVendor=040d, idProduct=3410
- [ 3.773774@1] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 3.773779@1] usb 1-1.2: Product: Audio-gd
- [ 3.773784@1] usb 1-1.2: Manufacturer: Audio-gd
- [ 3.937745@3] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
- [ 3.938171@3] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities
- [ 3.960521@3] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
- [ 3.963539@0] input: Audio-gd Audio-gd as /devices/dwc2_b/usb1/1-1/1-1.2/1-1.2:1.2/0003:040D:3410.0001/input/input3
- [ 3.963740@1] hid-generic 0003:040D:3410.0001: input,hidraw0: USB HID v1.00 Device [Audio-gd Audio-gd] on usb-dwc2_b-1.2/input2
- [ 4.254529@0] random: nonblocking pool is initialized
- [ 9.610374@0] systemd[1]: System time before build time, advancing clock.
- [ 9.627518@1] systemd[1]: systemd 232 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK -SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
- [ 9.627797@1] systemd[1]: Detected architecture arm64.
- [ 9.627984@1] systemd[1]: Set hostname to <LibreELEC>.
- [ 9.674609@1] systemd[1]: Listening on udev Kernel Socket.
- [ 9.674876@1] systemd[1]: Listening on udev Control Socket.
- [ 9.675010@1] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
- [ 9.675981@1] systemd[1]: Created slice System Slice.
- [ 9.677151@1] systemd[1]: Mounting Variable Directory...
- [ 9.679095@1] systemd[1]: Starting Show Version...
- [ 9.681480@1] systemd[1]: Mounting POSIX Message Queue File System...
- [ 9.682349@1] systemd[1]: Listening on RPCbind Server Activation Socket.
- [ 9.682647@1] systemd[1]: Listening on Journal Socket.
- [ 9.684644@1] systemd[1]: Starting Setup machine-id...
- [ 9.691150@1] systemd[1]: Starting Create list of required static device nodes for the current kernel...
- [ 9.696569@1] systemd[1]: Starting Load Kernel Modules...
- [ 9.696896@1] systemd[1]: Listening on Journal Socket (/dev/log).
- [ 9.697252@1] systemd[1]: Created slice User and Session Slice.
- [ 9.697359@1] systemd[1]: Reached target Slices.
- [ 9.700208@1] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
- [ 9.700321@1] systemd[1]: Reached target Paths.
- [ 9.700469@1] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
- [ 9.700526@1] systemd[1]: Reached target Swap.
- [ 9.702048@1] systemd[1]: Mounting Temporary Directory...
- [ 9.703587@1] systemd[1]: Mounting Debug File System...
- [ 9.703717@1] systemd[1]: Reached target RPC Port Mapper.
- [ 9.706017@1] systemd[1]: Starting Remount Root and Kernel File Systems...
- [ 9.711308@1] systemd[1]: Mounted Debug File System.
- [ 9.711477@1] systemd[1]: Mounted POSIX Message Queue File System.
- [ 9.711540@1] systemd[1]: Mounted Variable Directory.
- [ 9.711607@1] systemd[1]: Mounted Temporary Directory.
- [ 9.711851@2] mali-utgard d00c0000.mali: set min pp to default 1
- [ 9.711858@2] mali-utgard d00c0000.mali: set min clk default to 0
- [ 9.711951@2] mali-utgard d00c0000.mali: max clk set 5
- [ 9.711957@2] mali-utgard d00c0000.mali: turbo clk set to 6
- [ 9.714089@2] gpu cooling register okay with err=0
- [ 9.714143@2] gpu core cooling register okay with err=0
- [ 9.714380@2] Mali: Mali device driver loaded
- [ 9.715005@1] systemd[1]: Started Show Version.
- [ 9.716130@1] systemd[1]: Started Setup machine-id.
- [ 9.716839@1] systemd[1]: Started Create list of required static device nodes for the current kernel.
- [ 9.716907@2] Registered IR keymap rc-empty
- [ 9.717065@2] input: meson-ir as /devices/c8100580.meson-ir/rc/rc0/input4
- [ 9.717210@2] rc0: meson-ir as /devices/c8100580.meson-ir/rc/rc0
- [ 9.718845@1] systemd[1]: Started Remount Root and Kernel File Systems.
- [ 9.720727@2] IR RC5(x) protocol handler initialized
- [ 9.721263@0] IR NEC protocol handler initialized
- [ 9.722733@1] systemd[1]: Starting udev Coldplug all Devices...
- [ 9.722791@3] IR RC6 protocol handler initialized
- [ 9.724797@1] systemd[1]: Starting Create Static Device Nodes in /dev...
- [ 9.725946@3] IR JVC protocol handler initialized
- [ 9.726977@1] systemd[1]: Starting Journal Service...
- [ 9.729663@1] systemd[1]: Starting Setup Timezone data...
- [ 9.731606@0] IR Sony protocol handler initialized
- [ 9.735401@0] IR SANYO protocol handler initialized
- [ 9.737433@3] IR MCE Keyboard/mouse protocol handler initialized
- [ 9.740644@1] systemd[1]: Started Create Static Device Nodes in /dev.
- [ 9.740864@0] lirc_dev: IR Remote Control driver registered, major 231
- [ 9.741098@1] systemd[1]: Reached target Local File Systems (Pre).
- [ 9.741262@1] systemd[1]: Reached target Local File Systems.
- [ 9.742041@0] IR LIRC bridge handler initialized
- [ 9.742672@0] input: MCE IR Keyboard/Mouse (meson-ir) as /devices/virtual/input/input5
- [ 9.742982@0] rc rc0: lirc_dev: driver ir-lirc-codec (meson-ir) registered at minor = 0
- [ 9.743070@0] meson-ir c8100580.meson-ir: receiver initialized
- [ 9.744492@1] systemd[1]: Started Load Kernel Modules.
- [ 9.746666@1] systemd[1]: Starting Apply Kernel Variables...
- [ 9.759697@1] systemd[1]: Started Apply Kernel Variables.
- [ 9.760413@1] systemd[1]: Started Setup Timezone data.
- [ 9.806000@1] systemd[1]: Started Journal Service.
- [ 9.819289@2] systemd-journald[197]: Received request to flush runtime journal from PID 1
- [ 10.450027@3] Console: switching to colour dummy device 80x25
- [ 10.672402@2] rtc-pcf8563 1-0051: chip found, driver version 0.4.3
- [ 10.672502@2] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO)
- [ 10.672509@2] i2c i2c-1: token 1, master_no(1) 300K addr 0x51
- [ 10.672720@2] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO)
- [ 10.672728@2] i2c i2c-1: token 1, master_no(1) 300K addr 0x51
- [ 10.672784@2] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO)
- [ 10.672789@2] i2c i2c-1: token 1, master_no(1) 300K addr 0x51
- [ 10.672795@2] rtc-pcf8563 1-0051: pcf8563_get_datetime: read error
- [ 10.673039@2] rtc-pcf8563 1-0051: rtc core: registered rtc-pcf8563 as rtc0
- [ 10.814348@2] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO)
- [ 10.814364@2] i2c i2c-1: token 1, master_no(1) 300K addr 0x51
- [ 10.814417@2] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO)
- [ 10.814422@2] i2c i2c-1: token 1, master_no(1) 300K addr 0x51
- [ 10.814474@2] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO)
- [ 10.814479@2] i2c i2c-1: token 1, master_no(1) 300K addr 0x51
- [ 10.814486@2] rtc-pcf8563 1-0051: pcf8563_get_datetime: read error
- [ 10.889376@2] input: lircd-uinput as /devices/virtual/input/input7
- [ 11.065835@2] 8021q: 802.1Q VLAN Support v1.8
- [ 11.257262@3] input: eventlircd as /devices/virtual/input/input9
- [ 12.285784@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:1
- [ 12.355900@1] CPU2: shutdown
- [ 13.043183@0] fb: osd[0] enable: 1 (kodi.bin)
- [ 13.288267@0] thermal thermal_zone0: temp:34000, hyst:5000, trip_temp:85000, hot:0
- [ 13.289008@2] CPU2: Booted secondary processor
- [ 14.311720@1] usb 1-1.2: USB disconnect, device number 3
- [ 14.477861@0] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
- [ 14.477918@0] aml_spdif_dai: share the same clock
- [ 14.477930@0] aml_audio_hw: IEC958 PCM32
- [ 14.477936@0] hdmitx: audio: aout notify rate 44100
- [ 14.477940@0] hdmitx: audio: aout notify size 32
- [ 14.477944@0] hdmitx: audio: aout notify format CT_PCM
- [ 14.477954@0] aml_snd_m8_card aml_m8_snd.40: i2s/958 same source
- [ 14.478063@0] aml_snd_card: audio speaker on
- [ 14.487014@0] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
- [ 14.487028@0] aml_spdif_dai: share the same clock
- [ 14.487038@0] aml_audio_hw: IEC958 PCM32
- [ 14.487045@0] hdmitx: audio: aout notify rate 44100
- [ 14.487048@0] hdmitx: audio: aout notify size 32
- [ 14.487052@0] hdmitx: audio: no update
- [ 14.487062@0] aml_snd_m8_card aml_m8_snd.40: i2s/958 same source
- [ 14.487186@0] channel count should be 8, we got 2 aborting
- [ 14.487629@0] aml_snd_m8_card aml_m8_snd.40: I2S playback enable
- [ 14.487640@0] aml_snd_m8_card aml_m8_snd.40: IEC958 playback enable
- [ 15.045904@1] libphy: stmmac-0:00 - Link is Up - 1000/Full
- [ 15.045929@1] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 15.689041@0] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO)
- [ 15.689060@0] i2c i2c-1: token 1, master_no(1) 300K addr 0x51
- [ 15.689110@0] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO)
- [ 15.689116@0] i2c i2c-1: token 1, master_no(1) 300K addr 0x51
- [ 15.689165@0] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO)
- [ 15.689173@0] i2c i2c-1: token 1, master_no(1) 300K addr 0x51
- [ 15.689181@0] rtc-pcf8563 1-0051: pcf8563_set_datetime: err=-11 addr=02, data=19
- [ 15.689266@0] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO)
- [ 15.689271@0] i2c i2c-1: token 1, master_no(1) 300K addr 0x51
- [ 15.689324@0] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO)
- [ 15.689330@0] i2c i2c-1: token 1, master_no(1) 300K addr 0x51
- [ 15.689379@0] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO)
- [ 15.689384@0] i2c i2c-1: token 1, master_no(1) 300K addr 0x51
- [ 15.689389@0] rtc-pcf8563 1-0051: pcf8563_get_datetime: read error
- [ 47.549721@0] HOST mode
- [ 47.579663@0] dwc_otg: -------hcd->flags.d32 = 0
- [ 47.579696@0] dwc_otg: Init: Port Power? op_state=1
- [ 47.579700@0] dwc_otg: Init1: Power Port (0)
- [ 47.579709@0] DEBUG:set_usb_vbus_power:: set usb port power on (board gpio 1)!
- [ 47.579709@0]
- [ 47.969711@1] dwc_otg: Indeed it is in host mode hprt0 = 00021501
- [ 48.149724@1] usb 2-1: new high-speed USB device number 2 using dwc_otg
- [ 48.152236@1] dwc_otg: Indeed it is in host mode hprt0 = 00001101
- [ 48.387777@0] usb 2-1: New USB device found, idVendor=040d, idProduct=3410
- [ 48.387790@0] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 48.387795@0] usb 2-1: Product: Audio-gd
- [ 48.387800@0] usb 2-1: Manufacturer: Audio-gd
- [ 48.577460@1] input: Audio-gd Audio-gd as /devices/dwc2_a/usb2/2-1/2-1:1.2/0003:040D:3410.0002/input/input10
- [ 48.577684@3] hid-generic 0003:040D:3410.0002: input,hidraw0: USB HID v1.00 Device [Audio-gd Audio-gd] on usb-dwc2_a-1/input2
- [ 49.409552@0] aml_snd_m8_card aml_m8_snd.40: I2S playback disable
- [ 49.409566@0] aml_snd_m8_card aml_m8_snd.40: IEC958 playback disable
- [ 49.409637@0] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
- [ 49.409704@0] aml_spdif_dai: share the same clock
- [ 49.409715@0] aml_audio_hw: IEC958 PCM32
- [ 49.409721@0] hdmitx: audio: aout notify rate 44100
- [ 49.409732@0] hdmitx: audio: aout notify size 32
- [ 49.409735@0] hdmitx: audio: no update
- [ 49.409741@0] aml_snd_m8_card aml_m8_snd.40: i2s/958 same source
- [ 54.419783@0] aml_snd_card: audio speaker off
- [ 93.096085@0] hdmitx: system: irq 2
- [ 93.419821@0] hdmitx: plugin
- [ 93.549083@0] hdmitx: edid: check sum valid
- [ 93.549098@0] hdmitx: edid: check sum valid
- [ 93.549104@0] hdmitx: edid: blk0 raw data
- [ 93.549163@0] 00ffffffffffff003e8d2700fe020000321a0103800000780af20da754519924
- [ 93.549163@0] 104f5c3fcf80317c457c617c81c081fc81009500a940023a801871382d40582c
- [ 93.549163@0] 450000000000001e000000ff005137324a363530303736360a20000000fc004f
- [ 93.549163@0] 70746f6d612031303830500a000000ff0037324a3630383131313131313101a6
- [ 93.549163@0]
- [ 93.549163@0]
- [ 93.549175@0] hdmitx: edid: blk1 raw data
- [ 93.549210@0] 020325f24d0615021184930514101f20212223090707830100006a030c002000
- [ 93.549210@0] 3821208000011d007251d01e206e28550000000000001a011d00bc52d01e20b8
- [ 93.549210@0] 28554000000000001e023a80d072382d40102c258000000000001e023a801871
- [ 93.549210@0] 382d40502c450000000000001e662156aa51001e30468f330000000000001edf
- [ 93.549210@0]
- [ 93.549210@0]
- [ 93.549223@0] EDID Parser:
- [ 93.555417@0] hdmitx: edid: find IEEEOUT
- [ 93.555436@0] hdmitx: edid: check sum valid
- [ 93.555440@0] hdmitx: edid: check sum valid
- [ 93.555446@0] hdmitx: update RX hdr info 0
- [ 93.557514@0] [RX]-receive ksv list len:1,depth:1,cas:0,dev:0
- [ 93.557529@0] hdmitx: video: get current mode: 1080p60hz
- [ 93.557534@0] hdmitx: update rx hdr info 0
- [ 93.557550@0] hdmitx: get ext_name (null)
- [ 93.557563@0] hdmitx: system: [set_disp_mode_auto] ALREADY init VIC = 16
- [ 93.557570@0] hdmtix: set audio
- [ 93.557583@0] hdmitx tx_aud_src = 0
- [ 93.557595@0] hdmitx: system: irq 80000001
- [ 93.557645@0] hdmitx: fs = 2, cd = 4, tmds_clk = 148500
- [ 93.557649@0] hdmitx aud_n_para = 6272
- [ 93.557671@0] hdmitx set channel status
- [ 93.557741@0] hdmitx: audio: Audio Type: PCM
- [ 93.557813@0] Start = 0x10000100 End = 0x100001ff
- [ 93.557825@0] [0x10000103]: 0x00000008
- [ 93.557830@0] [0x10000104]: 0x00000001
- [ 93.558035@0] [0x10000170]: 0x00000010
- [ 93.558069@0] [0x10000180]: 0x000000ff
- [ 93.558074@0] [0x10000181]: 0x000000ff
- [ 93.558079@0] [0x10000182]: 0x00000003
- [ 93.558084@0] [0x10000183]: 0x00000007
- [ 93.558089@0] [0x10000184]: 0x0000003f
- [ 93.558094@0] [0x10000185]: 0x00000002
- [ 93.558100@0] [0x10000187]: 0x000000ff
- [ 93.558105@0] [0x10000188]: 0x00000003
- [ 97.497688@0] hdmitx: system: irq 80000004
- [ 97.497744@0] hdmitx: plugout
- [ 97.497761@0] hdmitx: clear RX hdr info
- [ 97.798218@0] hdmitx: system: irq 80000002
- [ 98.119670@0] hdmitx: plugin
- [ 98.248920@0] hdmitx: edid: check sum valid
- [ 98.248938@0] hdmitx: edid: check sum valid
- [ 98.248944@0] hdmitx: edid: blk0 raw data
- [ 98.248978@0] 00ffffffffffff003e8d2700fe020000321a0103800000780af20da754519924
- [ 98.248978@0] 104f5c3fcf80317c457c617c81c081fc81009500a940023a801871382d40582c
- [ 98.248978@0] 450000000000001e000000ff005137324a363530303736360a20000000fc004f
- [ 98.248978@0] 70746f6d612031303830500a000000ff0037324a3630383131313131313101a6
- [ 98.248978@0]
- [ 98.248978@0]
- [ 98.248989@0] hdmitx: edid: blk1 raw data
- [ 98.249029@0] 020325f24d0615021184930514101f20212223090707830100006a030c002000
- [ 98.249029@0] 3821208000011d007251d01e206e28550000000000001a011d00bc52d01e20b8
- [ 98.249029@0] 28554000000000001e023a80d072382d40102c258000000000001e023a801871
- [ 98.249029@0] 382d40502c450000000000001e662156aa51001e30468f330000000000001edf
- [ 98.249029@0]
- [ 98.249029@0]
- [ 98.249042@0] EDID Parser:
- [ 98.249091@0] hdmitx: edid: find IEEEOUT
- [ 98.249096@0] hdmitx: edid: check sum valid
- [ 98.249099@0] hdmitx: edid: check sum valid
- [ 98.249104@0] hdmitx: update RX hdr info 0
- [ 98.251152@0] [RX]-receive ksv list len:1,depth:1,cas:0,dev:0
- [ 98.251164@0] hdmitx: video: get current mode: 1080p60hz
- [ 98.251168@0] hdmitx: update rx hdr info 0
- [ 98.251186@0] hdmitx: get ext_name 1080p60hz
- [ 98.251220@0] hdmitx: system: already init VIC = 0 Now VIC = 16
- [ 98.251225@0] hdmitx: rx no SCDC present indicator
- [ 98.253235@0] hdmitx: ddc rd8b error 0x54 0x01
- [ 98.255262@0] hdmitx: ddc rd8b error 0x54 0x01
- [ 98.255269@0] hdmirx version is 1.4 or below
- [ 98.255273@0] hdmitx div40: 0
- [ 98.279677@0] hdmitx: system: set mode VIC 16 (cd0,cs0,pm1,vd0,1)
- [ 98.279690@0] hdmitx: system: set pll
- [ 98.279694@0] hdmitx: system: param->VIC:16
- [ 98.279698@0] hdmitx: set clk: VIC = 16 cd = 4
- [ 98.279705@0] config HPLL = 2970000
- [ 98.279725@0] HPLL: 0xc800023d
- [ 98.279729@0] config HPLL done
- [ 98.279737@0] set_hpll_od3_clk_div[441] div = 6
- [ 98.279745@0] j = 4 vid_clk_div = 1
- [ 98.279768@0] hdmitx: set enc for VIC: 16
- [ 98.279785@0] hdmitx_set_hw[4867] set VIC = 16
- [ 98.280000@0] hdmitx: system: irq 80000001
- [ 98.280110@0] Start = 0x10000100 End = 0x100001ff
- [ 98.280121@0] [0x10000104]: 0x00000001
- [ 98.280332@0] [0x10000180]: 0x000000ff
- [ 98.280337@0] [0x10000181]: 0x000000ff
- [ 98.280342@0] [0x10000182]: 0x00000003
- [ 98.280346@0] [0x10000183]: 0x00000007
- [ 98.280351@0] [0x10000184]: 0x0000003f
- [ 98.280355@0] [0x10000185]: 0x00000002
- [ 98.280361@0] [0x10000187]: 0x000000ff
- [ 98.280367@0] [0x10000188]: 0x00000003
- [ 98.291666@0] hdmitx: ddc w1b error 0x54 0x20 0x00
- [ 98.293679@0] hdmitx: ddc w1b error 0x54 0x20 0x00
- [ 98.295690@0] hdmitx: ddc rd8b error 0x54 0x21
- [ 98.411709@0] hdmitx: system: phy setting done
- [ 98.415740@0] Sink is HDMI device
- [ 98.415751@0] hdmitx: system: packet: can't get vendor data
- [ 98.415757@0] hdmtix: set audio
- [ 98.415767@0] hdmitx tx_aud_src = 0
- [ 98.415803@0] hdmitx: fs = 2, cd = 4, tmds_clk = 148500
- [ 98.415808@0] hdmitx aud_n_para = 6272
- [ 98.415828@0] hdmitx set channel status
- [ 98.415892@0] hdmitx: audio: Audio Type: PCM
- [ 98.415897@0] hdmtix: set audio
- [ 98.415907@0] hdmitx tx_aud_src = 0
- [ 98.415942@0] hdmitx: fs = 2, cd = 4, tmds_clk = 148500
- [ 98.415946@0] hdmitx aud_n_para = 6272
- [ 98.415965@0] hdmitx set channel status
- [ 98.416028@0] hdmitx: audio: Audio Type: PCM
- [ 146.486405@0] WARN::urb_dequeue:783: urb->hcpriv == NULL! urb = ffffffc0651f2400 status=-104
- [ 146.486405@0]
- [ 146.486424@0] WARN::urb_dequeue:783: urb->hcpriv == NULL! urb = ffffffc0651f2300 status=-104
- [ 146.486424@0]
- [ 172.299924@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:1
- [ 172.390109@1] CPU2: shutdown
- [ 173.302304@0] thermal thermal_zone0: temp:41000, hyst:5000, trip_temp:85000, hot:0
- [ 173.303054@2] CPU2: Booted secondary processor
- [ 178.299930@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:1
- [ 178.390046@1] CPU2: shutdown
- [ 179.302305@0] thermal thermal_zone0: temp:41000, hyst:5000, trip_temp:85000, hot:0
- [ 179.303048@2] CPU2: Booted secondary processor
- [ 183.299980@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:1
- [ 183.400061@1] CPU3: shutdown
- [ 184.302305@0] thermal thermal_zone0: temp:41000, hyst:5000, trip_temp:85000, hot:0
- [ 184.303052@3] CPU3: Booted secondary processor
- [ 185.299917@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:1
- [ 185.380059@1] CPU2: shutdown
- [ 186.302326@0] thermal thermal_zone0: temp:57000, hyst:5000, trip_temp:85000, hot:0
- [ 186.303069@2] CPU2: Booted secondary processor
- [ 190.800698@0] Disconnect cb-Host
- [ 190.809813@3] usb 2-1: USB disconnect, device number 2
- [ 190.972100@3] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
- [ 190.972117@3] aml_spdif_dai: share the same clock
- [ 190.972130@3] aml_audio_hw: IEC958 PCM32
- [ 190.972137@3] hdmitx: audio: aout notify rate 44100
- [ 190.972141@3] hdmitx: audio: aout notify size 32
- [ 190.972144@3] hdmitx: audio: no update
- [ 190.972158@3] aml_snd_m8_card aml_m8_snd.40: i2s/958 same source
- [ 190.972280@3] aml_snd_card: audio speaker on
- [ 190.979914@0] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
- [ 190.979928@0] aml_spdif_dai: share the same clock
- [ 190.979939@0] aml_audio_hw: IEC958 PCM32
- [ 190.979946@0] hdmitx: audio: aout notify rate 44100
- [ 190.979950@0] hdmitx: audio: aout notify size 32
- [ 190.979953@0] hdmitx: audio: no update
- [ 190.979965@0] aml_snd_m8_card aml_m8_snd.40: i2s/958 same source
- [ 190.980215@0] channel count should be 8, we got 2 aborting
- [ 190.980700@0] aml_snd_m8_card aml_m8_snd.40: I2S playback enable
- [ 190.980719@0] aml_snd_m8_card aml_m8_snd.40: IEC958 playback enable
- [ 191.299975@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:1
- [ 191.410030@1] CPU3: shutdown
- [ 192.302306@0] thermal thermal_zone0: temp:42000, hyst:5000, trip_temp:85000, hot:0
- [ 192.303044@3] CPU3: Booted secondary processor
- [ 195.299900@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:1
- [ 195.390036@1] CPU2: shutdown
- [ 196.302297@0] thermal thermal_zone0: temp:57000, hyst:5000, trip_temp:85000, hot:0
- [ 196.303036@2] CPU2: Booted secondary processor
- [ 199.299912@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:1
- [ 199.380030@1] CPU2: shutdown
- [ 200.302305@0] thermal thermal_zone0: temp:42000, hyst:5000, trip_temp:85000, hot:0
- [ 200.303048@2] CPU2: Booted secondary processor
- [ 209.299899@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:1
- [ 209.390069@1] CPU2: shutdown
- [ 210.299896@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:0
- [ 210.300630@2] CPU2: Booted secondary processor
- [ 214.299922@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:1
- [ 214.390037@1] CPU2: shutdown
- [ 215.302289@0] thermal thermal_zone0: temp:58000, hyst:5000, trip_temp:85000, hot:0
- [ 215.303025@2] CPU2: Booted secondary processor
- [ 216.299935@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:1
- [ 216.390043@1] CPU2: shutdown
- [ 217.302318@0] thermal thermal_zone0: temp:42000, hyst:5000, trip_temp:85000, hot:0
- [ 217.303069@2] CPU2: Booted secondary processor
- [ 221.299905@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:1
- [ 221.390039@1] CPU2: shutdown
- [ 222.219760@3] dwc_otg: Indeed it is in host mode hprt0 = 00021501
- [ 222.302303@0] thermal thermal_zone0: temp:44000, hyst:5000, trip_temp:85000, hot:0
- [ 222.303046@2] CPU2: Booted secondary processor
- [ 222.399750@3] usb 2-1: new high-speed USB device number 3 using dwc_otg
- [ 222.402307@3] dwc_otg: Indeed it is in host mode hprt0 = 00001101
- [ 222.637805@0] usb 2-1: New USB device found, idVendor=040d, idProduct=3410
- [ 222.637819@0] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 222.637824@0] usb 2-1: Product: Audio-gd
- [ 222.637829@0] usb 2-1: Manufacturer: Audio-gd
- [ 222.832226@3] input: Audio-gd Audio-gd as /devices/dwc2_a/usb2/2-1/2-1:1.2/0003:040D:3410.0003/input/input11
- [ 222.832469@3] hid-generic 0003:040D:3410.0003: input,hidraw0: USB HID v1.00 Device [Audio-gd Audio-gd] on usb-dwc2_a-1/input2
- [ 223.813330@0] aml_snd_m8_card aml_m8_snd.40: I2S playback disable
- [ 223.813346@0] aml_snd_m8_card aml_m8_snd.40: IEC958 playback disable
- [ 223.813430@3] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
- [ 223.813438@3] aml_spdif_dai: share the same clock
- [ 223.813448@3] aml_audio_hw: IEC958 PCM32
- [ 223.813454@3] hdmitx: audio: aout notify rate 44100
- [ 223.813458@3] hdmitx: audio: aout notify size 32
- [ 223.813462@3] hdmitx: audio: no update
- [ 223.813469@3] aml_snd_m8_card aml_m8_snd.40: i2s/958 same source
- [ 227.299917@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:1
- [ 227.390583@1] CPU2: shutdown
- [ 228.299941@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:0
- [ 228.300680@2] CPU2: Booted secondary processor
- [ 228.819787@3] aml_snd_card: audio speaker off
- [ 243.299934@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:1
- [ 243.390045@1] CPU2: shutdown
- [ 244.302308@0] thermal thermal_zone0: temp:59000, hyst:5000, trip_temp:85000, hot:0
- [ 244.303050@2] CPU2: Booted secondary processor
- [ 250.299937@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:1
- [ 250.390080@1] CPU2: shutdown
- [ 251.302304@0] thermal thermal_zone0: temp:60000, hyst:5000, trip_temp:85000, hot:0
- [ 251.303046@2] CPU2: Booted secondary processor
- [ 261.299923@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:1
- [ 261.390044@1] CPU2: shutdown
- [ 262.299912@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:0
- [ 262.300650@2] CPU2: Booted secondary processor
- [ 272.299937@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:1
- [ 272.370075@1] CPU2: shutdown
- [ 273.302331@0] thermal thermal_zone0: temp:44000, hyst:5000, trip_temp:85000, hot:0
- [ 273.303082@2] CPU2: Booted secondary processor
- [ 276.299934@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:1
- [ 276.390062@1] CPU2: shutdown
- [ 277.299908@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:0
- [ 277.300644@2] CPU2: Booted secondary processor
- [ 284.299939@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:1
- [ 284.370087@1] CPU2: shutdown
- [ 285.302317@0] thermal thermal_zone0: temp:45000, hyst:5000, trip_temp:85000, hot:0
- [ 285.303062@2] CPU2: Booted secondary processor
- [ 290.299947@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:1
- [ 290.390062@1] CPU2: shutdown
- [ 291.299898@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:0
- [ 291.300634@2] CPU2: Booted secondary processor
- [ 293.299909@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:1
- [ 293.400063@1] CPU2: shutdown
- [ 294.302305@0] thermal thermal_zone0: temp:45000, hyst:5000, trip_temp:85000, hot:0
- [ 294.303049@2] CPU2: Booted secondary processor
- [ 296.334050@0] Disconnect cb-Host
- [ 296.560116@3] usb 2-1: USB disconnect, device number 3
- [ 296.720173@3] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
- [ 296.720188@3] aml_spdif_dai: share the same clock
- [ 296.720198@3] aml_audio_hw: IEC958 PCM32
- [ 296.720204@3] hdmitx: audio: aout notify rate 44100
- [ 296.720208@3] hdmitx: audio: aout notify size 32
- [ 296.720212@3] hdmitx: audio: no update
- [ 296.720223@3] aml_snd_m8_card aml_m8_snd.40: i2s/958 same source
- [ 296.720322@3] aml_snd_card: audio speaker on
- [ 296.731055@3] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
- [ 296.731069@3] aml_spdif_dai: share the same clock
- [ 296.731080@3] aml_audio_hw: IEC958 PCM32
- [ 296.731087@3] hdmitx: audio: aout notify rate 44100
- [ 296.731090@3] hdmitx: audio: aout notify size 32
- [ 296.731095@3] hdmitx: audio: no update
- [ 296.731106@3] aml_snd_m8_card aml_m8_snd.40: i2s/958 same source
- [ 296.731296@3] channel count should be 8, we got 2 aborting
- [ 296.731845@3] aml_snd_m8_card aml_m8_snd.40: I2S playback enable
- [ 296.731860@3] aml_snd_m8_card aml_m8_snd.40: IEC958 playback enable
- [ 300.356026@0] hdmitx: system: irq 80000004
- [ 300.356070@0] hdmitx: plugout
- [ 300.356087@0] hdmitx: clear RX hdr info
- [ 304.299908@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:1
- [ 304.380037@1] CPU2: shutdown
- [ 305.299907@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:0
- [ 305.300640@2] CPU2: Booted secondary processor
- [ 308.299906@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:1
- [ 308.400046@1] CPU2: shutdown
- [ 309.302311@0] thermal thermal_zone0: temp:44000, hyst:5000, trip_temp:85000, hot:0
- [ 309.303058@2] CPU2: Booted secondary processor
- [ 314.299932@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:1
- [ 314.390036@1] CPU2: shutdown
- [ 315.302349@0] thermal thermal_zone0: temp:44000, hyst:5000, trip_temp:85000, hot:0
- [ 315.303094@2] CPU2: Booted secondary processor
- [ 316.299921@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:1
- [ 316.400052@1] CPU2: shutdown
- [ 316.969762@0] dwc_otg: Indeed it is in host mode hprt0 = 00021501
- [ 317.149740@1] usb 2-1: new high-speed USB device number 4 using dwc_otg
- [ 317.152253@1] dwc_otg: Indeed it is in host mode hprt0 = 00001101
- [ 317.299908@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:0
- [ 317.300644@2] CPU2: Booted secondary processor
- [ 317.387910@1] usb 2-1: New USB device found, idVendor=040d, idProduct=3410
- [ 317.387925@1] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 317.387930@1] usb 2-1: Product: Audio-gd
- [ 317.387935@1] usb 2-1: Manufacturer: Audio-gd
- [ 317.577407@3] input: Audio-gd Audio-gd as /devices/dwc2_a/usb2/2-1/2-1:1.2/0003:040D:3410.0004/input/input12
- [ 317.577623@3] hid-generic 0003:040D:3410.0004: input,hidraw0: USB HID v1.00 Device [Audio-gd Audio-gd] on usb-dwc2_a-1/input2
- [ 318.510924@0] aml_snd_m8_card aml_m8_snd.40: I2S playback disable
- [ 318.510928@0] aml_snd_m8_card aml_m8_snd.40: IEC958 playback disable
- [ 318.510991@0] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
- [ 318.510995@0] aml_spdif_dai: share the same clock
- [ 318.511003@0] aml_audio_hw: IEC958 PCM32
- [ 318.511007@0] hdmitx: audio: aout notify rate 44100
- [ 318.511008@0] hdmitx: audio: aout notify size 32
- [ 318.511010@0] hdmitx: audio: no update
- [ 318.511014@0] aml_snd_m8_card aml_m8_snd.40: i2s/958 same source
- [ 320.299928@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:1
- [ 320.380042@1] CPU2: shutdown
- [ 321.299967@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:0
- [ 321.300707@2] CPU2: Booted secondary processor
- [ 323.519834@0] aml_snd_card: audio speaker off
- [ 332.299921@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:1
- [ 332.390061@1] CPU2: shutdown
- [ 333.302308@0] thermal thermal_zone0: temp:44000, hyst:5000, trip_temp:85000, hot:0
- [ 333.303048@2] CPU2: Booted secondary processor
- [ 336.299944@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:1
- [ 336.380122@1] CPU2: shutdown
- [ 337.302314@0] thermal thermal_zone0: temp:60000, hyst:5000, trip_temp:85000, hot:0
- [ 337.303054@2] CPU2: Booted secondary processor
- [ 340.299921@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:1
- [ 340.390060@1] CPU2: shutdown
- [ 341.302299@0] thermal thermal_zone0: temp:44000, hyst:5000, trip_temp:85000, hot:0
- [ 341.303038@2] CPU2: Booted secondary processor
- [ 355.299910@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:1
- [ 355.390065@1] CPU2: shutdown
- [ 356.302315@0] thermal thermal_zone0: temp:45000, hyst:5000, trip_temp:85000, hot:0
- [ 356.303053@2] CPU2: Booted secondary processor
- [ 357.299920@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:1
- [ 357.380076@1] CPU2: shutdown
- [ 358.302317@0] thermal thermal_zone0: temp:45000, hyst:5000, trip_temp:85000, hot:0
- [ 358.303056@2] CPU2: Booted secondary processor
- [ 370.299924@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:1
- [ 370.380108@1] CPU2: shutdown
- [ 371.302297@0] thermal thermal_zone0: temp:45000, hyst:5000, trip_temp:85000, hot:0
- [ 371.303039@2] CPU2: Booted secondary processor
- [ 379.711312@0] hdmitx: system: irq 80000002
- [ 380.039696@1] hdmitx: plugin
- [ 380.168900@1] hdmitx: edid: check sum valid
- [ 380.168918@1] hdmitx: edid: check sum valid
- [ 380.168923@1] hdmitx: edid: blk0 raw data
- [ 380.168956@1] 00ffffffffffff003e8d2700fe020000321a0103800000780af20da754519924
- [ 380.168956@1] 104f5c3fcf80317c457c617c81c081fc81009500a940023a801871382d40582c
- [ 380.168956@1] 450000000000001e000000ff005137324a363530303736360a20000000fc004f
- [ 380.168956@1] 70746f6d612031303830500a000000ff0037324a3630383131313131313101a6
- [ 380.168956@1]
- [ 380.168956@1]
- [ 380.168968@1] hdmitx: edid: blk1 raw data
- [ 380.168999@1] 020325f24d0615021184930514101f20212223090707830100006a030c002000
- [ 380.168999@1] 3821208000011d007251d01e206e28550000000000001a011d00bc52d01e20b8
- [ 380.168999@1] 28554000000000001e023a80d072382d40102c258000000000001e023a801871
- [ 380.168999@1] 382d40502c450000000000001e662156aa51001e30468f330000000000001edf
- [ 380.168999@1]
- [ 380.168999@1]
- [ 380.169012@1] EDID Parser:
- [ 380.169064@1] hdmitx: edid: find IEEEOUT
- [ 380.169070@1] hdmitx: edid: check sum valid
- [ 380.169073@1] hdmitx: edid: check sum valid
- [ 380.169078@1] hdmitx: update RX hdr info 0
- [ 380.171125@1] [RX]-receive ksv list len:1,depth:1,cas:0,dev:0
- [ 380.171138@1] hdmitx: video: get current mode: 1080p60hz
- [ 380.171141@1] hdmitx: update rx hdr info 0
- [ 380.171158@1] hdmitx: get ext_name 1080p60hz
- [ 380.171190@1] hdmitx: system: already init VIC = 0 Now VIC = 16
- [ 380.171197@1] hdmitx: rx no SCDC present indicator
- [ 380.173207@1] hdmitx: ddc rd8b error 0x54 0x01
- [ 380.175219@1] hdmitx: ddc rd8b error 0x54 0x01
- [ 380.175224@1] hdmirx version is 1.4 or below
- [ 380.175226@1] hdmitx div40: 0
- [ 380.199686@1] hdmitx: system: set mode VIC 16 (cd0,cs0,pm1,vd0,1)
- [ 380.199699@1] hdmitx: system: set pll
- [ 380.199703@1] hdmitx: system: param->VIC:16
- [ 380.199708@1] hdmitx: set clk: VIC = 16 cd = 4
- [ 380.199715@1] config HPLL = 2970000
- [ 380.199736@1] HPLL: 0xc800023d
- [ 380.199740@1] config HPLL done
- [ 380.199749@1] set_hpll_od3_clk_div[441] div = 6
- [ 380.199757@1] j = 4 vid_clk_div = 1
- [ 380.199771@1] hdmitx: set enc for VIC: 16
- [ 380.199788@1] hdmitx_set_hw[4867] set VIC = 16
- [ 380.199988@0] hdmitx: system: irq 80000001
- [ 380.200006@0] Start = 0x10000100 End = 0x100001ff
- [ 380.200018@0] [0x10000104]: 0x00000001
- [ 380.200206@0] [0x10000180]: 0x000000ff
- [ 380.200211@0] [0x10000181]: 0x000000ff
- [ 380.200229@0] [0x10000182]: 0x00000003
- [ 380.200234@0] [0x10000183]: 0x00000007
- [ 380.200239@0] [0x10000184]: 0x0000003f
- [ 380.200244@0] [0x10000185]: 0x00000002
- [ 380.200250@0] [0x10000187]: 0x000000ff
- [ 380.200255@0] [0x10000188]: 0x00000003
- [ 380.211679@1] hdmitx: ddc w1b error 0x54 0x20 0x00
- [ 380.213692@1] hdmitx: ddc w1b error 0x54 0x20 0x00
- [ 380.215701@1] hdmitx: ddc rd8b error 0x54 0x21
- [ 380.331694@1] hdmitx: system: phy setting done
- [ 380.335708@1] Sink is HDMI device
- [ 380.335734@1] hdmitx: system: packet: can't get vendor data
- [ 380.335741@1] hdmtix: set audio
- [ 380.335752@1] hdmitx tx_aud_src = 0
- [ 380.335780@1] hdmitx: fs = 2, cd = 4, tmds_clk = 148500
- [ 380.335784@1] hdmitx aud_n_para = 6272
- [ 380.335806@1] hdmitx set channel status
- [ 380.335870@1] hdmitx: audio: Audio Type: PCM
- [ 380.335874@1] hdmtix: set audio
- [ 380.335885@1] hdmitx tx_aud_src = 0
- [ 380.335911@1] hdmitx: fs = 2, cd = 4, tmds_clk = 148500
- [ 380.335914@1] hdmitx aud_n_para = 6272
- [ 380.335933@1] hdmitx set channel status
- [ 380.335993@1] hdmitx: audio: Audio Type: PCM
- [ 383.299899@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:1
- [ 383.390070@1] CPU3: shutdown
- [ 384.299899@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:0
- [ 384.300643@3] CPU3: Booted secondary processor
- [ 384.602482@0] hdmitx: system: irq 80000004
- [ 384.602552@0] hdmitx: plugout
- [ 384.602571@0] hdmitx: clear RX hdr info
- [ 384.903102@0] hdmitx: system: irq 80000002
- [ 385.229715@0] hdmitx: plugin
- [ 385.359081@0] hdmitx: edid: check sum valid
- [ 385.359111@0] hdmitx: edid: check sum valid
- [ 385.359117@0] hdmitx: edid: blk0 raw data
- [ 385.359152@0] 00ffffffffffff003e8d2700fe020000321a0103800000780af20da754519924
- [ 385.359152@0] 104f5c3fcf80317c457c617c81c081fc81009500a940023a801871382d40582c
- [ 385.359152@0] 450000000000001e000000ff005137324a363530303736360a20000000fc004f
- [ 385.359152@0] 70746f6d612031303830500a000000ff0037324a3630383131313131313101a6
- [ 385.359152@0]
- [ 385.359152@0]
- [ 385.359163@0] hdmitx: edid: blk1 raw data
- [ 385.359194@0] 020325f24d0615021184930514101f20212223090707830100006a030c002000
- [ 385.359194@0] 3821208000011d007251d01e206e28550000000000001a011d00bc52d01e20b8
- [ 385.359194@0] 28554000000000001e023a80d072382d40102c258000000000001e023a801871
- [ 385.359194@0] 382d40502c450000000000001e662156aa51001e30468f330000000000001edf
- [ 385.359194@0]
- [ 385.359194@0]
- [ 385.359207@0] EDID Parser:
- [ 385.359274@0] hdmitx: edid: find IEEEOUT
- [ 385.359279@0] hdmitx: edid: check sum valid
- [ 385.359282@0] hdmitx: edid: check sum valid
- [ 385.359288@0] hdmitx: update RX hdr info 0
- [ 385.361336@0] [RX]-receive ksv list len:1,depth:1,cas:0,dev:0
- [ 385.361357@0] hdmitx: video: get current mode: 1080p60hz
- [ 385.361359@0] hdmitx: update rx hdr info 0
- [ 385.361372@0] hdmitx: get ext_name 1080p60hz
- [ 385.361405@0] hdmitx: system: already init VIC = 0 Now VIC = 16
- [ 385.361409@0] hdmitx: rx no SCDC present indicator
- [ 385.363425@0] hdmitx: ddc rd8b error 0x54 0x01
- [ 385.365444@0] hdmitx: ddc rd8b error 0x54 0x01
- [ 385.365450@0] hdmirx version is 1.4 or below
- [ 385.365454@0] hdmitx div40: 0
- [ 385.389697@0] hdmitx: system: set mode VIC 16 (cd0,cs0,pm1,vd0,1)
- [ 385.389710@0] hdmitx: system: set pll
- [ 385.389713@0] hdmitx: system: param->VIC:16
- [ 385.389717@0] hdmitx: set clk: VIC = 16 cd = 4
- [ 385.389750@0] config HPLL = 2970000
- [ 385.389771@0] HPLL: 0xc800023d
- [ 385.389774@0] config HPLL done
- [ 385.389784@0] set_hpll_od3_clk_div[441] div = 6
- [ 385.389792@0] j = 4 vid_clk_div = 1
- [ 385.389806@0] hdmitx: set enc for VIC: 16
- [ 385.389825@0] hdmitx_set_hw[4867] set VIC = 16
- [ 385.390063@0] hdmitx: system: irq 80000001
- [ 385.390088@0] Start = 0x10000100 End = 0x100001ff
- [ 385.390109@0] [0x10000104]: 0x00000001
- [ 385.390300@0] [0x10000180]: 0x000000ff
- [ 385.390305@0] [0x10000181]: 0x000000ff
- [ 385.390310@0] [0x10000182]: 0x00000003
- [ 385.390314@0] [0x10000183]: 0x00000007
- [ 385.390319@0] [0x10000184]: 0x0000003f
- [ 385.390324@0] [0x10000185]: 0x00000002
- [ 385.390330@0] [0x10000187]: 0x000000ff
- [ 385.390334@0] [0x10000188]: 0x00000003
- [ 385.401691@0] hdmitx: ddc w1b error 0x54 0x20 0x00
- [ 385.403706@0] hdmitx: ddc w1b error 0x54 0x20 0x00
- [ 385.405720@0] hdmitx: ddc rd8b error 0x54 0x21
- [ 385.521707@0] hdmitx: system: phy setting done
- [ 385.525727@0] Sink is HDMI device
- [ 385.525749@0] hdmitx: system: packet: can't get vendor data
- [ 385.525755@0] hdmtix: set audio
- [ 385.525790@0] hdmitx tx_aud_src = 0
- [ 385.525822@0] hdmitx: fs = 2, cd = 4, tmds_clk = 148500
- [ 385.525828@0] hdmitx aud_n_para = 6272
- [ 385.525849@0] hdmitx set channel status
- [ 385.525931@0] hdmitx: audio: Audio Type: PCM
- [ 385.525937@0] hdmtix: set audio
- [ 385.525948@0] hdmitx tx_aud_src = 0
- [ 385.525976@0] hdmitx: fs = 2, cd = 4, tmds_clk = 148500
- [ 385.525980@0] hdmitx aud_n_para = 6272
- [ 385.526002@0] hdmitx set channel status
- [ 385.526084@0] hdmitx: audio: Audio Type: PCM
- [ 386.579470@0] WARN::urb_dequeue:783: urb->hcpriv == NULL! urb = ffffffc059dedd00 status=-104
- [ 386.579470@0]
- [ 386.579500@0] WARN::urb_dequeue:783: urb->hcpriv == NULL! urb = ffffffc059dedb00 status=-104
- [ 386.579500@0]
- [ 386.606011@2] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
- [ 386.606015@2] aml_spdif_dai: share the same clock
- [ 386.606023@2] aml_audio_hw: IEC958 PCM32
- [ 386.606027@2] hdmitx: audio: aout notify rate 44100
- [ 386.606029@2] hdmitx: audio: aout notify size 32
- [ 386.606030@2] hdmitx: audio: no update
- [ 386.606039@2] aml_snd_m8_card aml_m8_snd.40: i2s/958 same source
- [ 386.606209@2] aml_snd_card: audio speaker on
- [ 386.609845@0] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
- [ 386.609858@0] aml_spdif_dai: share the same clock
- [ 386.609869@0] aml_audio_hw: IEC958 PCM32
- [ 386.609875@0] hdmitx: audio: aout notify rate 44100
- [ 386.609879@0] hdmitx: audio: aout notify size 32
- [ 386.609883@0] hdmitx: audio: no update
- [ 386.609895@0] aml_snd_m8_card aml_m8_snd.40: i2s/958 same source
- [ 386.610091@0] channel count should be 8, we got 2 aborting
- [ 386.611717@0] aml_snd_m8_card aml_m8_snd.40: I2S playback enable
- [ 386.611730@0] aml_snd_m8_card aml_m8_snd.40: IEC958 playback enable
- [ 461.658231@0] aml_snd_m8_card aml_m8_snd.40: I2S playback disable
- [ 461.658249@0] aml_snd_m8_card aml_m8_snd.40: IEC958 playback disable
- [ 461.658322@0] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
- [ 461.658329@0] aml_spdif_dai: share the same clock
- [ 461.658338@0] aml_audio_hw: IEC958 PCM32
- [ 461.658345@0] hdmitx: audio: aout notify rate 44100
- [ 461.658349@0] hdmitx: audio: aout notify size 32
- [ 461.658353@0] hdmitx: audio: no update
- [ 461.658358@0] aml_snd_m8_card aml_m8_snd.40: i2s/958 same source
- [ 461.658889@0] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
- [ 461.658894@0] aml_spdif_dai: share the same clock
- [ 461.658902@0] aml_audio_hw: IEC958 PCM32
- [ 461.658906@0] hdmitx: audio: aout notify rate 44100
- [ 461.658910@0] hdmitx: audio: aout notify size 32
- [ 461.658913@0] hdmitx: audio: no update
- [ 461.658919@0] aml_snd_m8_card aml_m8_snd.40: i2s/958 same source
- [ 466.659862@0] aml_snd_card: audio speaker off
- [ 562.302292@0] Disconnect cb-Host
- [ 562.309800@3] usb 2-1: USB disconnect, device number 4
- [ 562.470431@3] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
- [ 562.470436@3] aml_spdif_dai: share the same clock
- [ 562.470446@3] aml_audio_hw: IEC958 PCM32
- [ 562.470450@3] hdmitx: audio: aout notify rate 44100
- [ 562.470452@3] hdmitx: audio: aout notify size 32
- [ 562.470453@3] hdmitx: audio: no update
- [ 562.470462@3] aml_snd_m8_card aml_m8_snd.40: i2s/958 same source
- [ 562.470566@3] aml_snd_card: audio speaker on
- [ 562.480938@3] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
- [ 562.480953@3] aml_spdif_dai: share the same clock
- [ 562.480962@3] aml_audio_hw: IEC958 PCM32
- [ 562.480969@3] hdmitx: audio: aout notify rate 44100
- [ 562.480972@3] hdmitx: audio: aout notify size 32
- [ 562.480976@3] hdmitx: audio: no update
- [ 562.480987@3] aml_snd_m8_card aml_m8_snd.40: i2s/958 same source
- [ 562.481165@3] channel count should be 8, we got 2 aborting
- [ 562.481624@3] aml_snd_m8_card aml_m8_snd.40: I2S playback enable
- [ 562.481634@3] aml_snd_m8_card aml_m8_snd.40: IEC958 playback enable
- [ 565.469757@3] dwc_otg: Indeed it is in host mode hprt0 = 00021501
- [ 565.649720@3] usb 2-1: new high-speed USB device number 5 using dwc_otg
- [ 565.652256@3] dwc_otg: Indeed it is in host mode hprt0 = 00001101
- [ 565.887827@3] usb 2-1: New USB device found, idVendor=040d, idProduct=3410
- [ 565.887832@3] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 565.887835@3] usb 2-1: Product: Audio-gd
- [ 565.887838@3] usb 2-1: Manufacturer: Audio-gd
- [ 566.079816@3] input: Audio-gd Audio-gd as /devices/dwc2_a/usb2/2-1/2-1:1.2/0003:040D:3410.0005/input/input13
- [ 566.080297@3] hid-generic 0003:040D:3410.0005: input,hidraw0: USB HID v1.00 Device [Audio-gd Audio-gd] on usb-dwc2_a-1/input2
- [ 567.031528@0] aml_snd_m8_card aml_m8_snd.40: I2S playback disable
- [ 567.031543@0] aml_snd_m8_card aml_m8_snd.40: IEC958 playback disable
- [ 567.031601@3] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
- [ 567.031610@3] aml_spdif_dai: share the same clock
- [ 567.031621@3] aml_audio_hw: IEC958 PCM32
- [ 567.031627@3] hdmitx: audio: aout notify rate 44100
- [ 567.031632@3] hdmitx: audio: aout notify size 32
- [ 567.031635@3] hdmitx: audio: no update
- [ 567.031641@3] aml_snd_m8_card aml_m8_snd.40: i2s/958 same source
- [ 572.039769@3] aml_snd_card: audio speaker off
- [ 573.623164@0] hdmitx: system: irq 80000004
- [ 573.623224@0] hdmitx: plugout
- [ 573.623241@0] hdmitx: clear RX hdr info
- [ 684.512889@0] WARN::urb_dequeue:783: urb->hcpriv == NULL! urb = ffffffc0651ea600 status=-104
- [ 684.512889@0]
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement