Pastebin
API
tools
faq
paste
Login
Sign up
Please fix the following errors:
New Paste
Syntax Highlighting
[ 0.000000@0] Initializing cgroup subsys cpuset [ 0.000000@0] Initializing cgroup subsys cpu [ 0.000000@0] Initializing cgroup subsys cpuacct [ 0.000000@0] Linux version 3.14.29 (chewitt@buildbox) (gcc version 6.2.0 (GCC) ) #1 SMP PREEMPT Wed Mar 22 17:26:49 GMT 2017 [ 0.000000@0] CPU: AArch64 Processor [410fd034] revision 4 [ 0.000000@0] fdt Reserved memory table: [ 0.000000@0] linux,meson-fb: 0x000000007e700000 - 0x0000000080000000 (25 MiB) [ 0.000000@0] linux,di: 0x000000007c900000 - 0x000000007e700000 (30 MiB) [ 0.000000@0] DI: DI reserved memory: created CMA memory pool at 0x000000007c900000, size 30 MiB [ 0.000000@0] linux,ion-dev: 0x000000007a900000 - 0x000000007c900000 (32 MiB) [ 0.000000@0] linux,ppmgr: 0x000000007a900000 - 0x000000007a900000 (0 MiB) [ 0.000000@0] linux,codec_mm_cma: 0x000000006e800000 - 0x000000007a800000 (192 MiB) [ 0.000000@0] linux,codec_mm_reserved: 0x000000006a700000 - 0x000000006e800000 (65 MiB) [ 0.000000@0] fdt Reserved memory total: 347 MiB [ 0.000000@0] cma: Reserved 8 MiB at 69c00000 [ 0.000000@0] On node 0 totalpages: 513024 [ 0.000000@0] Normal zone: 9032 pages used for memmap [ 0.000000@0] Normal zone: 0 pages reserved [ 0.000000@0] Normal zone: 513024 pages, LIFO batch:31 [ 0.000000@0] psci: probing function IDs from device-tree [ 0.000000@0] PERCPU: Embedded 12 pages/cpu @ffffffc07a8a3000 s18368 r8192 d22592 u49152 [ 0.000000@0] pcpu-alloc: s18368 r8192 d22592 u49152 alloc=12*4096 [ 0.000000@0] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 503992 [ 0.000000@0] Kernel command line: console=tty0 boot=/dev/mmcblk0p1 disk=/dev/mmcblk0p2 no_console_suspend logo=osd1,loaded,0x3f800000,1080p60hz vout=1080p60hz,enable hdmimode=1080p60hz cvbsmode=nocvbs mac=00:1e:06:34:28:52 consoleblank=0 max_freq=1536 maxcpus=4 hdmitx=cec17 quiet [ 0.000000@0] logo: osd1 [ 0.000000@0] logo: loaded [ 0.000000@0] logo: 0x3f800000 [ 0.000000@0] logo: 1080p60hz [ 0.000000@0] vout_serve: 1080p60hz [ 0.000000@0] vout_serve: enable: 1 [ 0.000000@0] logo: get hdmimode: 1080p60hz [ 0.000000@0] logo: get cvbsmode: nocvbs [ 0.000000@0] dvfs [get_max_freq] - max_freq : 1536000000 [ 0.000000@0] hdmitx: cec: HDMI hdmi_cec_func_config:0x17 [ 0.000000@0] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000@0] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000@0] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.000000@0] Memory: 1652808K/2052096K available (8672K kernel code, 813K rwdata, 3308K rodata, 3653K init, 5528K bss, 399288K reserved) [ 0.000000@0] Virtual kernel memory layout: [ 0.000000@0] vmalloc : 0xffffff8000000000 - 0xffffff8040000000 ( 1024 MB) [ 0.000000@0] vmemmap : 0xffffff8040010000 - 0xffffff804239f800 ( 35 MB) [ 0.000000@0] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB) [ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc07e700000 ( 2023 MB) [ 0.000000@0] .init : 0xffffffc001c35000 - 0xffffffc001fc67c0 ( 3654 kB) [ 0.000000@0] .text : 0xffffffc001080000 - 0xffffffc001c34184 ( 11985 kB) [ 0.000000@0] .data : 0xffffffc001fc7000 - 0xffffffc002092678 ( 814 kB) [ 0.000000@0] SLUB: HWalign=64, Order=0-1, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000@0] arch_multi_cluster:0 [ 0.000000@0] Preemptible hierarchical RCU implementation. [ 0.000000@0] RCU debugfs-based tracing is enabled. [ 0.000000@0] NR_IRQS:64 nr_irqs:64 0 [ 0.000000@0] Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000003@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 0.000022@0] meson_bc_timer: mclk->mux_reg =ffffff800000c990,mclk->reg =ffffff800000e994 [ 0.000214@0] Console: colour dummy device 80x25 [ 0.000304@0] console [tty0] enabled [ 0.002643@0] allocated 8388608 bytes of page_cgroup [ 0.002647@0] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.002658@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.002665@0] pid_max: default: 32768 minimum: 301 [ 0.002761@0] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.002767@0] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.004596@0] device-tree: Duplicate name in /efusekey, renamed to "key0#1" [ 0.004606@0] device-tree: Duplicate name in /efusekey, renamed to "key1#1" [ 0.004613@0] device-tree: Duplicate name in /efusekey, renamed to "key2#1" [ 0.004622@0] device-tree: Duplicate name in /efusekey, renamed to "key3#1" [ 0.006839@0] Initializing cgroup subsys debug [ 0.006847@0] Initializing cgroup subsys memory [ 0.006861@0] Initializing cgroup subsys devices [ 0.006866@0] Initializing cgroup subsys freezer [ 0.006872@0] Initializing cgroup subsys blkio [ 0.006876@0] Initializing cgroup subsys net_prio [ 0.006926@0] ftrace: allocating 29443 entries in 116 pages [ 0.032541@0] /cpus/cpu@0: Missing clock-frequency property [ 0.032557@0] /cpus/cpu@1: Missing clock-frequency property [ 0.032564@0] /cpus/cpu@2: Missing clock-frequency property [ 0.032571@0] /cpus/cpu@3: Missing clock-frequency property [ 0.073728@0] Meson chip version = RevC (1F:C - 0:0) [ 0.092896@1] CPU1: Booted secondary processor [ 0.112882@2] CPU2: Booted secondary processor [ 0.132890@3] CPU3: Booted secondary processor [ 0.132944@0] Brought up 4 CPUs [ 0.132955@0] SMP: Total of 4 processors activated. [ 0.133347@0] devtmpfs: initialized [ 0.145416@0] xor: measuring software checksum speed [ 0.242277@0] 8regs : 2933.600 MB/sec [ 0.342284@0] 8regs_prefetch: 2612.800 MB/sec [ 0.442308@0] 32regs : 3468.000 MB/sec [ 0.542334@0] 32regs_prefetch: 2941.600 MB/sec [ 0.542338@0] xor: using function: 32regs (3468.000 MB/sec) [ 0.542347@0] pinctrl core: initialized pinctrl subsystem [ 0.542552@0] regulator-dummy: no parameters [ 0.542881@0] NET: Registered protocol family 16 [ 0.543701@0] aml_vdac_init: module init [ 0.543740@0] register canvas platform driver [ 0.543760@0] register rdma platform driver [ 0.544272@0] vdso: 2 pages (1 code, 1 data) at base ffffffc001fce000 [ 0.544514@0] DMA: preallocated 256 KiB pool for atomic allocations [ 0.545705@0] software IO TLB [mem 0x65800000-0x65c00000] (4MB) mapped at [ffffffc065800000-ffffffc065bfffff] [ 0.545774@0] aml_i2c version: 20140813 [ 0.545808@0] codec_mm:codec_mm_module_init [ 0.545972@0] gxbb_mpll_clk: register mpll_clk_out0 success done [ 0.545979@0] gxbb_mpll_clk: register mpll_clk_out1 success done [ 0.545985@0] gxbb_mpll_clk: register mpll_clk_out2 success done [ 0.546171@0] clk_sys: register PLL sys_pll success done [ 0.546210@0] gxbb_clk: [ xtal ] ->clockrate: 24000000Hz [ 0.546214@0] gxbb_clk: [ 32Khz ] ->clockrate: 32000Hz [ 0.546219@0] gxbb_clk: [ clk81 ] ->clockrate: 166666666Hz [ 0.546223@0] gxbb_clk: [ fixed_pll ] ->clockrate: 2000000000Hz [ 0.546227@0] gxbb_clk: [ fclk_div2 ] ->clockrate: 1000000000Hz [ 0.546231@0] gxbb_clk: [ fclk_div3 ] ->clockrate: 666666666Hz [ 0.546234@0] gxbb_clk: [ fclk_div4 ] ->clockrate: 500000000Hz [ 0.546238@0] gxbb_clk: [ fclk_div5 ] ->clockrate: 400000000Hz [ 0.546241@0] gxbb_clk: [ fclk_div7 ] ->clockrate: 285714285Hz [ 0.546266@0] gxbb_clk: clock initialization complete [ 0.546403@0] clkmsr: msr_clk_reg0=ffffff800005c75c,msr_clk_reg2=ffffff800005e764 [ 0.547529@0] aml_iomap: amlogic iomap probe done [ 0.547747@0] pinmux-gxbb c1109880.pinmux: Init pinux probe! [ 0.548491@0] pinmux-gxbb c1109880.pinmux: Probed amlogic pinctrl driver [ 0.549054@0] aml-i2c c1108500.i2c: add adapter aml_i2c_adap1(ffffffc065c3c0e0) [ 0.549378@0] dvfs [scpi_dvfs_get_opps] - new count 6, max_freq 1536000000 [ 0.550340@0] codec_mm has 2 memory regions [ 0.550357@0] codec_mm codec_mm.17: assigned reserved memory node linux,codec_mm_cma ok [ 0.550365@0] codec_mm codec_mm.17: assigned reserved memory node linux,codec_mm_reserved ok [ 0.550391@0] codec_mm has 2 memory regions [ 0.550399@0] codec_mm codec_mm.17: assigned reserved memory node linux,codec_mm_cma ok [ 0.550406@0] codec_mm codec_mm.17: assigned reserved memory node linux,codec_mm_reserved ok [ 0.551056@0] vpu: driver version: v02 [ 0.551068@0] vpu: load vpu_clk: 666667000Hz(7) [ 0.551093@0] vpu: vpu_probe OK [ 0.551388@0] tv_vout: tvout_probe [ 0.551396@0] tv_vout: major number 254 for disp [ 0.551409@0] vout_notify: vout_register_server [ 0.551413@0] tv_vout: register tv module server ok [ 0.551433@0] tv_vout: tvout_probe OK [ 0.551597@0] canvas_probe reg=00000000c8838000,size=400 [ 0.551606@0] canvas maped reg_base =ffffff800019c000 [ 0.554814@0] rdma_probe [ 0.664980@0] bio: create slab <bio-0> at 0 [ 0.832597@0] raid6: int64x1 533 MB/s [ 1.002566@0] raid6: int64x2 848 MB/s [ 1.172647@0] raid6: int64x4 1268 MB/s [ 1.342668@0] raid6: int64x8 1413 MB/s [ 1.512752@0] raid6: neonx1 935 MB/s [ 1.682794@0] raid6: neonx2 1501 MB/s [ 1.852849@0] raid6: neonx4 1937 MB/s [ 2.022915@0] raid6: neonx8 2034 MB/s [ 2.022919@0] raid6: using algorithm neonx8 (2034 MB/s) [ 2.022923@0] raid6: using intx1 recovery algorithm [ 2.023160@0] SCSI subsystem initialized [ 2.023303@0] usbcore: registered new interface driver usbfs [ 2.023334@0] usbcore: registered new interface driver hub [ 2.023387@0] usbcore: registered new device driver usb [ 2.023425@0] Linux video capture interface: v2.00 [ 2.023467@0] pps_core: LinuxPPS API ver. 1 registered [ 2.023471@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 2.023483@0] PTP clock support registered [ 2.023575@0] hdmitx: system: amhdmitx_init [ 2.023578@0] hdmitx: system: Ver: 2014May6 [ 2.023690@0] hdmitx: system: amhdmitx_probe [ 2.023857@1] hdmitx: system: not find match init-data [ 2.023862@1] hdmitx: system: not find match pwr-ctl [ 2.023867@1] hdmitx hpd irq = 89 [ 2.024094@1] hdmitx20: Mapped PHY: 0xc0800000 [ 2.024104@1] hdmitx20: Mapped PHY: 0xc1104400 [ 2.024121@1] hdmitx20: Mapped PHY: 0xc8100000 [ 2.024126@1] hdmitx20: Mapped PHY: 0xc8834000 [ 2.024131@1] hdmitx20: Mapped PHY: 0xc883a000 [ 2.024135@1] hdmitx20: Mapped PHY: 0xc883c000 [ 2.024142@1] hdmitx20: Mapped PHY: 0xd0100000 [ 2.024147@1] hdmitx20: Mapped PHY: 0xda83a000 [ 2.024157@1] hdmitx: alread display in uboot 0x10 [ 2.024178@1] avmute set to 1 [ 2.024276@1] vout_serve: vout_init_module [ 2.024340@1] tv_vout: tv_set_current_vmode[764]fps_target_mode=16 [ 2.024345@1] tv_vout: mode is 16,sync_duration_den=1,sync_duration_num=60 [ 2.024353@1] tv_vout: already display in uboot [ 2.024356@1] vout_serve: vinfo mode is: 1080p60hz [ 2.024360@1] vout_serve: init mode 1080p60hz [ 2.024378@1] vout_serve: create vout attribute OK [ 2.024382@1] vout_serve: meson_vout_probe OK [ 2.024432@1] logo: logo_init [ 2.024567@1] osd_rdma: osd_rdma_init: rdma_table p=0x69c41000,op=0x69c41000 , v=0xffffff80001b1000 [ 2.024571@1] osd_rdma: osd rdma request irq as second interrput function! [ 2.024681@1] Advanced Linux Sound Architecture Driver Initialized. [ 2.025592@1] Switched to clocksource arch_sys_counter [ 2.048003@1] NET: Registered protocol family 2 [ 2.048344@1] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 2.048431@1] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 2.048616@1] TCP: Hash tables configured (established 16384 bind 16384) [ 2.048678@1] TCP: reno registered [ 2.048686@1] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 2.048721@1] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 2.048878@1] NET: Registered protocol family 1 [ 2.049052@1] RPC: Registered named UNIX socket transport module. [ 2.049056@1] RPC: Registered udp transport module. [ 2.049060@1] RPC: Registered tcp transport module. [ 2.049063@1] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.122755@1] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 2.122818@1] audit: initializing netlink subsys (disabled) [ 2.122848@1] audit: type=2000 audit(2.100:1): initialized [ 2.126989@1] VFS: Disk quotas dquot_6.5.2 [ 2.127122@1] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.128031@1] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 2.128950@1] NFS: Registering the id_resolver key type [ 2.128978@1] Key type id_resolver registered [ 2.128982@1] Key type id_legacy registered [ 2.128992@1] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 2.129516@1] msgmni has been set to 3628 [ 2.130339@1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 2.130392@1] io scheduler noop registered [ 2.130396@1] io scheduler deadline registered [ 2.130416@1] io scheduler cfq registered (default) [ 2.130995@1] meson-rng c8834000.rng: hwrng registered [ 2.131078@1] [drm] Initialized drm 1.1.0 20060810 [ 2.132941@1] loop: module loaded [ 2.132947@1] Loading iSCSI transport class v2.0-870. [ 2.133133@1] iscsi: registered transport (tcp) [ 2.133437@1] mtdoops: mtd device (mtddev=name/number) must be supplied [ 2.133998@1] tun: Universal TUN/TAP device driver, 1.6 [ 2.134002@1] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 2.137398@1] libphy: stmmac: probed [ 2.137405@1] eth0: PHY ID 001cc916 at 0 IRQ POLL (stmmac-0:00) active [ 2.137410@1] eth0: PHY ID 001cc916 at 7 IRQ POLL (stmmac-0:07) [ 2.137610@1] PPP generic driver version 2.4.2 [ 2.137694@1] NET: Registered protocol family 24 [ 2.137744@1] usbcore: registered new interface driver smsc95xx [ 2.137781@1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.137786@1] ehci-h20ahb: H20AHB-EHCI Host Controller driver [ 2.137873@1] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.137925@1] usbcore: registered new interface driver cdc_acm [ 2.137929@1] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 2.137965@1] usbcore: registered new interface driver usb-storage [ 2.138039@1] usbcore: registered new interface driver usbserial [ 2.138060@1] usbcore: registered new interface driver usbserial_generic [ 2.138082@1] usbserial: USB Serial support registered for generic [ 2.138102@1] usbcore: registered new interface driver pl2303 [ 2.138123@1] usbserial: USB Serial support registered for pl2303 [ 2.138226@1] mousedev: PS/2 mouse device common for all mice [ 2.138308@1] i2c /dev entries driver [ 2.138888@1] ledtrig-cpu: registered to indicate activity on CPUs [ 2.138929@1] hidraw: raw HID events driver (C) Jiri Kosina [ 2.139483@1] usbcore: registered new interface driver usbhid [ 2.139487@1] usbhid: USB HID core driver [ 2.139599@1] meson_uart c81004c0.serial: ==uart0 reg addr = ffffff80001da4c0 [ 2.139618@1] c81004c0.serial: ttyS0 at MMIO 0xc81004c0 (irq = 225, base_baud = 1500000) is a meson_uart [ 2.139794@1] meson_uart c11084c0.serial: ==uart1 reg addr = ffffff80001dc4c0 [ 2.139807@1] c11084c0.serial: ttyS1 at MMIO 0xc11084c0 (irq = 58, base_baud = 1500000) is a meson_uart [ 2.140012@1] dwc_otg dwc2_b: dwc_otg_driver_probe(ffffffc065caf800) [ 2.180057@1] dwc_otg: usb1: type: 1 speed: 0, config: 0, dma: 0, id: 1, phy: c0000020, ctrl: 0 [ 2.180077@1] dwc_otg dwc2_b: base=0xffffff8001600000 [ 2.180082@1] dwc_otg dwc2_b: dwc_otg_device=0xffffffc065f8fe00 [ 2.682762@1] dwc_otg: Core Release: 3.10a [ 2.682772@1] dwc_otg: Setting default values for core params [ 2.682785@1] dwc_otg: curmode: 1, host_only: 1 [ 2.682797@1] dwc_otg dwc2_b: DMA config: BURST_DEFAULT [ 2.694967@1] dwc_otg: Using Buffer DMA mode [ 2.694972@1] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1 [ 2.694976@1] dwc_otg: Working on port type = HOST [ 2.695228@1] dwc_otg dwc2_b: DWC OTG Controller [ 2.695246@1] dwc_otg dwc2_b: new USB bus registered, assigned bus number 1 [ 2.695263@1] dwc_otg dwc2_b: irq 63, io mem 0x00000000 [ 2.695267@1] dwc_otg: -------hcd->flags.d32 = 0 [ 2.695289@1] dwc_otg: Init: Port Power? op_state=1 [ 2.695293@1] dwc_otg: Init1: Power Port (0) [ 2.695446@1] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.695453@1] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.695457@1] usb usb1: Product: DWC OTG Controller [ 2.695462@1] usb usb1: Manufacturer: Linux 3.14.29 dwc_otg_hcd [ 2.695467@1] usb usb1: SerialNumber: dwc2_b [ 2.695775@1] hub 1-0:1.0: USB hub found [ 2.695795@1] hub 1-0:1.0: 1 port detected [ 2.695925@1] dwc_otg dwc2_a: dwc_otg_driver_probe(ffffffc065cafc00) [ 2.695962@1] dwc_otg: usb0: type: 0 speed: 0, config: 0, dma: 0, id: 0, phy: c0000000, ctrl: 0 [ 2.695977@1] dwc_otg dwc2_a: base=0xffffff8001680000 [ 2.695982@1] dwc_otg dwc2_a: dwc_otg_device=0xffffffc065f84e00 [ 2.707565@1] dwc_otg: Core Release: 3.10a [ 2.707571@1] dwc_otg: Setting default values for core params [ 2.707582@1] dwc_otg: curmode: 1, host_only: 0 [ 2.717605@1] dwc_otg dwc2_a: DMA config: BURST_DEFAULT [ 2.729766@1] dwc_otg: Using Buffer DMA mode [ 2.729771@1] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1 [ 2.729775@1] dwc_otg: Working on port type = OTG [ 2.729778@1] dwc_otg: Current port type: SLAVE [ 2.729932@1] dwc_otg dwc2_a: DWC OTG Controller [ 2.729953@1] dwc_otg dwc2_a: new USB bus registered, assigned bus number 2 [ 2.729971@1] dwc_otg dwc2_a: irq 62, io mem 0x00000000 [ 2.730048@1] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.730054@1] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.730059@1] usb usb2: Product: DWC OTG Controller [ 2.730064@1] usb usb2: Manufacturer: Linux 3.14.29 dwc_otg_hcd [ 2.730068@1] usb usb2: SerialNumber: dwc2_a [ 2.730331@1] hub 2-0:1.0: USB hub found [ 2.730348@1] hub 2-0:1.0: 1 port detected [ 2.730454@1] dwc_otg: Dedicated Tx FIFOs mode [ 2.730700@1] dwc_otg: using timer detectid change, ffffffc065f89800 [ 2.730894@1] hdmitx: system: hdmitx_hdcp_init [ 2.730989@1] ESM HLD: Initializing... [ 2.730993@1] ESM HLD: Registering device range 'esm'... [ 2.731001@1] ESM HLD: Device range 'esm' has been registered. [ 2.731005@1] ESM HLD: Creating class /sys/class/elliptic... [ 2.731021@1] ESM HLD: The class /sys/class/elliptic has been created. [ 2.731025@1] ESM HLD: Creating device 'esm'... [ 2.731095@1] ESM HLD: Device 'esm' has been created. [ 2.731099@1] ESM HLD: Done initializing the HLD driver. [ 2.741252@1] BLASTER Driver Init [ 2.741365@1] secmon has 1 memory regions [ 2.741397@1] secmon: share in base: 0xffffff8000402000, share out base: 0xffffff8000404000 [ 2.741405@1] secmon secmon.4: assigned reserved memory node linux,secmon ok [ 2.741408@1] secmon: probe done [ 2.741502@1] storage: storage in base: 0xffffff8001700000 [ 2.741506@1] storage: storage out base: 0xffffff8001780000 [ 2.741509@1] storage: storage block base: 0xffffff8001800000 [ 2.741512@1] storage: probe done! [ 2.742027@1] aml_sd_emmc_probe: line 3558 [ 2.742032@1] mmc driver version: 1.07, 2015-01-21: fix a bug in tuning which caused eMMC data CRC error [ 2.743458@1] aml_sd_emmc_reg_init 1146 [ 2.743551@1] get property: ocr_avail, value:0x00200080 [ 2.743556@1] get property: f_min, value:400000 [ 2.743560@1] get property: f_max, value:100000000 [ 2.743565@1] get property: max_req_size, value:0x00020000 [ 2.743569@1] get property: irq_in, value:3 [ 2.743573@1] get property: irq_out, value:5 [ 2.743590@1] get property: gpio_cd, str: [ 2.743596@1] get property: pinname, str:sd [ 2.743601@1] get property: jtag_pin, str: [ 2.743606@1] get property: vol_switch, str: [ 2.743610@1] get property: vol_switch_18, value:1 [ 2.743614@1] get property: vol_switch_delay, value:150 [ 2.743618@1] get property: card_type, value:5 [ 2.743624@1] get property: gpio_dat3, str: [ 2.743636@1] sd:pdata->caps = 7 [ 2.743639@1] sd:pdata->caps2 = 0 [ 2.776755@1] [aml_is_card_insert] card IN [ 2.795604@2] [aml_sd_emmc_probe] aml_sd_emmc_probe() success! [ 2.795644@2] aml_sd_emmc_probe: line 3558 [ 2.807052@2] aml_sd_emmc_reg_init 1146 [ 2.807147@2] get property: ocr_avail, value:0x00200080 [ 2.807152@2] get property: f_min, value:400000 [ 2.807156@2] get property: f_max, value:100000000 [ 2.807160@2] get property: max_req_size, value:0x00020000 [ 2.807168@2] get property: pinname, str:emmc [ 2.807174@2] get property: card_type, value:1 [ 2.807178@2] get property: tx_phase, value:0 [ 2.807193@2] get property: gpio_dat3, str: [ 2.807198@2] get property: hw_reset, str: [ 2.807221@2] emmc:pdata->caps = c0000d47 [ 2.807230@2] emmc:pdata->caps2 = 8021 [ 2.807247@2] storage 0, boot 4 [ 2.807250@2] warning you may need update your uboot! [ 2.807262@2] get_storage_dev return 0 [ 2.807365@3] [aml_sd_emmc_probe] aml_sd_emmc_probe() fail! [ 2.807566@3] ion_dev has 1 memory regions [ 2.877950@1] normal card in [ 2.880078@3] fb: osd_init_module [ 2.880145@3] fb: viu vsync irq: 35 [ 2.880152@3] meson-fb has 1 memory regions [ 2.880177@3] meson-fb meson-fb.14: assigned reserved memory node linux,meson-fb ok [ 2.880190@3] fb: osd_probe vinfo:ffffffc002061ef0 [ 2.880195@3] fb: init fbdev bpp is:32 [ 2.890123@0] fb: osd probe OK [ 2.890200@0] ge2d: ge2d_init_module [ 2.890209@0] ge2d: ge2d_dev major:245 [ 2.890355@0] ge2d: ge2d clock is 400 MHZ [ 2.890361@0] ge2d: ge2d: pdev=ffffffc065c3ba00, irq=182, rstc=0xffffffc065ff4340, clk=ffffffc065c2bb00 [ 2.890390@0] ge2d: mapped phy: 0xd0160000 [ 2.890397@0] ge2d: ge2d start monitor [ 2.890515@0] codec:Amlogic A/V streaming port init [ 2.890607@0] ge2d: ge2d workqueue monitor start [ 2.891138@0] codec:get gate demux control ok ffffffc065ff7c40 [ 2.891144@0] codec:get gate parser_top control ok ffffffc065ff7cc0 [ 2.891150@0] codec:get gate vpu_intr control ok ffffffc065ff7d40 [ 2.891158@0] codec:get gate vdec control ok ffffffc065ff7dc0 [ 2.891323@0] codec:[tsync_pcr_init]init success. [ 2.891326@0] codec:amvideocap_init_module [ 2.891382@0] codec:amvideocap_probe,amvideocap [ 2.891386@0] codec:use cma buf. [ 2.891390@0] codec:amvideocap_dev_register [ 2.891862@0] amvenc_avc_probe -- reserved memory config fail. [ 2.891866@0] amvenc_avc - cma memory pool size: 40 MB [ 2.891881@0] encode_wq_init. [ 2.891887@0] encode start monitor. [ 2.891964@0] encode workqueue monitor start. [ 2.892037@0] jpegenc module init [ 2.892133@0] codec:picdec_driver_probe called. [ 2.892137@0] picdec has 1 memory regions [ 2.892157@0] codec:picdec_driver_probe done. [ 2.892561@0] codec:create_ge2d_work_queue video task ok [ 2.892742@0] codec:register clk_set_setting cpu[31] [ 2.892992@0] DI: di_module_init ok. [ 2.893001@0] DI: di_module_init: major 239 [ 2.893124@0] DI: di_probe [ 2.893231@0] deinterlace has 1 memory regions [ 2.893259@0] DI: di reveser memory 0x7c900000, size 30MB. [ 2.893268@0] deinterlace deinterlace.26: assigned reserved memory node linux,di ok [ 2.893287@0] di_irq:78,timerc_irq:38 [ 2.893582@0] rdma_register, rdma_table_addr ffffff800041a000 rdma_table_addr_phy 69c4a000 reg_buf ffffffc065002000 [ 2.893587@0] rdma_register success, handle 1 table_size 8192 [ 2.893591@0] DI: di_probe allocate rdma channel 1. [ 2.893596@0] DI: DI hw version 2. [ 2.893608@0] 0x000000db:Y=db,U=0,V=0 [ 2.893612@0] 0x000000dc:Y=dc,U=0,V=0 [ 2.893615@0] 0x000000dd:Y=dd,U=0,V=0 [ 2.893618@0] 0x000000de:Y=de,U=0,V=0 [ 2.893622@0] 0x000000df:Y=df,U=0,V=0 [ 2.893625@0] 0x000000e0:Y=e0,U=0,V=0 [ 2.893629@0] 0x000000e1:Y=e1,U=0,V=0 [ 2.893632@0] 0x000000e2:Y=e2,U=0,V=0 [ 2.893636@0] 0x000000e3:Y=e3,U=0,V=0 [ 2.893639@0] 0x000000f0:Y=f0,U=0,V=0 [ 2.893644@0] 0x000000f1:Y=f1,U=0,V=0 [ 2.893648@0] 0x000000f2:Y=f2,U=0,V=0 [ 2.893651@0] 0x000000f3:Y=f3,U=0,V=0 [ 2.893655@0] 0x000000f4:Y=f4,U=0,V=0 [ 2.893658@0] 0x000000f5:Y=f5,U=0,V=0 [ 2.893662@0] 0x000000f6:Y=f6,U=0,V=0 [ 2.893666@0] 0x000000f7:Y=f7,U=0,V=0 [ 2.893670@0] 0x000000f8:Y=f8,U=0,V=0 [ 2.893673@0] 0x000000f9:Y=f9,U=0,V=0 [ 2.893676@0] 0x000000fa:Y=fa,U=0,V=0 [ 2.893680@0] 0x000000fb:Y=fb,U=0,V=0 [ 2.893683@0] 0x000000fc:Y=fc,U=0,V=0 [ 2.893780@0] DI: di_probe here. [ 2.893937@0] efusekeynum: 4 [ 2.893947@0] efusekeyname: mac offset: 0 size: 6 [ 2.893953@0] efusekeyname: mac_bt offset: 6 size: 6 [ 2.893960@0] efusekeyname: mac_wifi offset: 12 size: 6 [ 2.893966@0] efusekeyname: usid offset: 18 size: 16 [ 2.894063@0] efuse efuse.10: probe OK! [ 2.894192@0] 6aml_unifykeys_init done! [ 2.894196@0] PPMGRDRV: warn: ppmgr module init func called [ 2.894239@0] PPMGRDRV: err: ppmgr_driver_probe called [ 2.894251@0] ppmgr has 1 memory regions [ 2.894269@0] PPMGRDRV: info: ppmgr_dev major:237 [ 2.894358@0] PPMGRDRV: info: ppmgr_probe done [ 2.894459@0] audio_dsp: [dsp]register dsp to char divece(257) [ 2.894725@0] amaudio: amaudio: driver amaudio succuess! [ 2.894730@0] amlvid:err: amlvideo_init called [ 2.894738@0] amlvid:err: amlvideo_create_instance called [ 2.894747@0] amlvid:err: v4l2_dev.name=:amlvideo-000 [ 2.894830@0] amlvideo-000: V4L2 device registered as video10 [ 2.894915@0] [RX]-hdmirx: hdmirx_init. [ 2.894919@0] ESM HLD: Initializing... [ 2.894922@0] ESM HLD: Registering device range 'esm_rx'... [ 2.894928@0] ESM HLD: Device range 'esm_rx' has been registered. [ 2.894932@0] ESM HLD: Creating class /sys/class/elliptic_rx... [ 2.894945@0] ESM HLD: The class /sys/class/elliptic_rx has been created. [ 2.894948@0] ESM HLD: Creating device 'esm_rx'... [ 2.895001@0] ESM HLD: Device 'esm_rx' has been created. [ 2.895005@0] ESM HLD: Done initializing the HLD driver. [ 2.895096@0] saradc c1108680.saradc: initialized by BL30 [ 2.895108@0] saradc c1108680.saradc: calibration start: [ 2.895151@0] saradc c1108680.saradc: nominal=0, value=1 [ 2.895192@0] saradc c1108680.saradc: nominal=256, value=252 [ 2.895233@0] saradc c1108680.saradc: nominal=512, value=507 [ 2.895275@0] saradc c1108680.saradc: nominal=768, value=765 [ 2.895316@0] saradc c1108680.saradc: nominal=1023, value=1019 [ 2.895321@0] saradc c1108680.saradc: calibration end: coef=4088 [ 2.895362@0] remote: Driver init [ 2.895482@0] m1-adckp adc_keypad.42: adc_key: faild to get name_len! [ 2.895506@0] m1-adckp adc_keypad.42: menu key(139) registed. [ 2.895511@0] m1-adckp adc_keypad.42: vol- key(114) registed. [ 2.895516@0] m1-adckp adc_keypad.42: vol+ key(115) registed. [ 2.895520@0] m1-adckp adc_keypad.42: esc key(1) registed. [ 2.895526@0] m1-adckp adc_keypad.42: home key(102) registed. [ 2.895651@0] input: adc_keypad as /devices/adc_keypad.42/input/input0 [ 2.895858@0] gpio-key gpio_keypad.41: gpio_key: 0 name(power) pin() [ 2.895864@0] gpio-key gpio_keypad.41: amlogic_gpio_name_map_num pin 0!:: [ 2.895874@0] gpio-key gpio_keypad.41: gpio_key: 0 power(125) [ 2.895896@0] gpio-key gpio_keypad.41: start setup_timer [ 2.895902@0] gpio-key gpio_keypad.41: power key(116) registed. [ 2.895987@0] input: gpio_keypad as /devices/gpio_keypad.41/input/input1 [ 2.896050@0] gpio-key gpio_keypad.41: gpio keypad register input device completed. [ 2.896057@0] input input1: gpio keypad major:234 [ 2.896305@0] cpuinfo: probe done [ 2.896646@0] input: cec_input as /devices/virtual/input/input2 [ 2.896784@0] cectx c810023c.aocec: aml_cec_probe(): no hdmirx reg resource [ 2.896798@0] cectx c810023c.aocec: aml_cec_probe(): no hhi reg resource [ 2.896853@0] cectx c810023c.aocec: aml_cec_probe(): can't find hdmirx [ 2.897994@0] cec: wake up flag:0 [ 2.898201@0] usbcore: registered new interface driver snd-usb-audio [ 2.899287@0] aml_pcm_dai: pcm mode detection =1 [ 2.899805@0] aml_snd_card: headphone detection disable=1 [ 2.899810@0] aml_snd_card: no spk event delay time set [ 2.901736@0] aml_snd_m8_card aml_m8_snd.40: dummy <-> I2S.33 mapping ok [ 2.903622@0] aml_snd_m8_card aml_m8_snd.40: dit-hifi <-> SPDIF.34 mapping ok [ 2.903737@0] aml_pcm: enter aml_pcm_new dai->name: PCM.35 dai->id: 0 [ 2.904121@0] aml_snd_m8_card aml_m8_snd.40: pcm2bt-pcm <-> PCM.35 mapping ok [ 2.907218@0] aml_snd_card: audio use jtag pinmux as i2s output, read val =ffffffff [ 2.911421@0] TCP: cubic registered [ 2.911757@0] NET: Registered protocol family 10 [ 2.912269@0] NET: Registered protocol family 17 [ 2.912320@0] Key type dns_resolver registered [ 2.912906@0] Registering SWP/SWPB emulation handler [ 2.913150@0] registered taskstats version 1 [ 2.913761@0] bio: create slab <bio-1> at 1 [ 2.914220@0] Btrfs loaded [ 2.914286@0] BTRFS: selftest: Running btrfs free space cache tests [ 2.914290@0] BTRFS: selftest: Running extent only tests [ 2.914307@0] BTRFS: selftest: Running bitmap only tests [ 2.914322@0] BTRFS: selftest: Running bitmap and extent tests [ 2.914342@0] BTRFS: selftest: Free space cache tests finished [ 2.914346@0] BTRFS: selftest: Running extent buffer operation tests [ 2.914349@0] BTRFS: selftest: Running btrfs_split_item tests [ 2.914387@0] BTRFS: selftest: Running find delalloc tests [ 2.975790@1] dwc_otg: Indeed it is in host mode hprt0 = 00021501 [ 2.995726@0] input input1: key 116 down [ 3.155687@1] usb 1-1: new high-speed USB device number 2 using dwc_otg [ 3.155943@0] dwc_otg: Indeed it is in host mode hprt0 = 00001101 [ 3.157117@1] BTRFS: selftest: Running btrfs_get_extent tests [ 3.157275@1] BTRFS: selftest: Running hole first btrfs_get_extent test [ 3.200920@1] sd: new high speed SDHC card at address aaaa [ 3.200925@1] sd: clock 50000000, 4-bit-bus-width [ 3.200925@1] [ 3.201228@1] mmcblk0: sd:aaaa SL08G 7.40 GiB [ 3.211139@1] mmcblk0: p1 p2 [ 3.275673@1] regulator-dummy: disabling [ 3.275760@1] console [netcon0] enabled [ 3.275764@1] netconsole: network logging started [ 3.275770@1] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 3.276686@1] cpufreq-scpi cpufreq-meson.7: enter cpufreq [ 3.276715@1] cpufreq-scpi cpufreq-meson.7: probe cpufreq okay [ 3.277786@0] gxbb_pm: enter meson_pm_probe! [ 3.277815@0] gxbb_pm: meson_pm_probe done [ 3.278152@0] cpucore_cooling_register, max_cpu_core_num:4 [ 3.285803@0] ALSA device list: [ 3.285807@0] #0: AML-M8AUDIO [ 3.287524@0] Freeing unused kernel memory: 3652K (ffffffc001c35000 - ffffffc001fc6000) [ 3.309673@3] fb: osd[0] enable: 1 (platform_init) [ 3.356892@0] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610 [ 3.356900@0] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 3.356905@0] usb 1-1: Product: USB2.0 Hub [ 3.357404@1] hub 1-1:1.0: USB hub found [ 3.357690@1] hub 1-1:1.0: 4 ports detected [ 3.375110@1] fb: Frame buffer memory assigned at [ 3.375122@1] fb: 0, phy: 0x000000007e700000, vir:0xffffff8001a80000, size=24576K [ 3.375122@1] [ 3.375131@1] fb: ---------------clear fb0 memory ffffff8001a80000 [ 3.388722@1] fb: osd[0] canvas.idx =0x40 [ 3.388726@1] fb: osd[0] canvas.addr=0x7e700000 [ 3.388729@1] fb: osd[0] canvas.width=7680 [ 3.388733@1] fb: osd[0] canvas.height=2160 [ 3.388736@1] fb: osd[0] frame.width=1920 [ 3.388739@1] fb: osd[0] frame.height=1080 [ 3.391569@1] fb: Frame buffer memory assigned at [ 3.391580@1] fb: 1, phy: 0x000000007ff00000, vir:0xffffff8003300000, size=1024K [ 3.391580@1] [ 3.391588@1] fb: fb1 open, logo index:1 [ 3.391939@3] vfm_map_store:rm default [ 3.391939@3] [ 3.391992@3] vfm_map_store:add default decoder ppmgr deinterlace amvideo [ 3.391992@3] [ 3.423477@3] Console: switching to colour frame buffer device 240x67 [ 3.635971@1] usb 1-1.2: new high-speed USB device number 3 using dwc_otg [ 3.773763@1] usb 1-1.2: New USB device found, idVendor=040d, idProduct=3410 [ 3.773774@1] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.773779@1] usb 1-1.2: Product: Audio-gd [ 3.773784@1] usb 1-1.2: Manufacturer: Audio-gd [ 3.937745@3] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 3.938171@3] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 3.960521@3] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 3.963539@0] input: Audio-gd Audio-gd as /devices/dwc2_b/usb1/1-1/1-1.2/1-1.2:1.2/0003:040D:3410.0001/input/input3 [ 3.963740@1] hid-generic 0003:040D:3410.0001: input,hidraw0: USB HID v1.00 Device [Audio-gd Audio-gd] on usb-dwc2_b-1.2/input2 [ 4.254529@0] random: nonblocking pool is initialized [ 9.610374@0] systemd[1]: System time before build time, advancing clock. [ 9.627518@1] systemd[1]: systemd 232 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK -SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN) [ 9.627797@1] systemd[1]: Detected architecture arm64. [ 9.627984@1] systemd[1]: Set hostname to <LibreELEC>. [ 9.674609@1] systemd[1]: Listening on udev Kernel Socket. [ 9.674876@1] systemd[1]: Listening on udev Control Socket. [ 9.675010@1] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 9.675981@1] systemd[1]: Created slice System Slice. [ 9.677151@1] systemd[1]: Mounting Variable Directory... [ 9.679095@1] systemd[1]: Starting Show Version... [ 9.681480@1] systemd[1]: Mounting POSIX Message Queue File System... [ 9.682349@1] systemd[1]: Listening on RPCbind Server Activation Socket. [ 9.682647@1] systemd[1]: Listening on Journal Socket. [ 9.684644@1] systemd[1]: Starting Setup machine-id... [ 9.691150@1] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 9.696569@1] systemd[1]: Starting Load Kernel Modules... [ 9.696896@1] systemd[1]: Listening on Journal Socket (/dev/log). [ 9.697252@1] systemd[1]: Created slice User and Session Slice. [ 9.697359@1] systemd[1]: Reached target Slices. [ 9.700208@1] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 9.700321@1] systemd[1]: Reached target Paths. [ 9.700469@1] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 9.700526@1] systemd[1]: Reached target Swap. [ 9.702048@1] systemd[1]: Mounting Temporary Directory... [ 9.703587@1] systemd[1]: Mounting Debug File System... [ 9.703717@1] systemd[1]: Reached target RPC Port Mapper. [ 9.706017@1] systemd[1]: Starting Remount Root and Kernel File Systems... [ 9.711308@1] systemd[1]: Mounted Debug File System. [ 9.711477@1] systemd[1]: Mounted POSIX Message Queue File System. [ 9.711540@1] systemd[1]: Mounted Variable Directory. [ 9.711607@1] systemd[1]: Mounted Temporary Directory. [ 9.711851@2] mali-utgard d00c0000.mali: set min pp to default 1 [ 9.711858@2] mali-utgard d00c0000.mali: set min clk default to 0 [ 9.711951@2] mali-utgard d00c0000.mali: max clk set 5 [ 9.711957@2] mali-utgard d00c0000.mali: turbo clk set to 6 [ 9.714089@2] gpu cooling register okay with err=0 [ 9.714143@2] gpu core cooling register okay with err=0 [ 9.714380@2] Mali: Mali device driver loaded [ 9.715005@1] systemd[1]: Started Show Version. [ 9.716130@1] systemd[1]: Started Setup machine-id. [ 9.716839@1] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 9.716907@2] Registered IR keymap rc-empty [ 9.717065@2] input: meson-ir as /devices/c8100580.meson-ir/rc/rc0/input4 [ 9.717210@2] rc0: meson-ir as /devices/c8100580.meson-ir/rc/rc0 [ 9.718845@1] systemd[1]: Started Remount Root and Kernel File Systems. [ 9.720727@2] IR RC5(x) protocol handler initialized [ 9.721263@0] IR NEC protocol handler initialized [ 9.722733@1] systemd[1]: Starting udev Coldplug all Devices... [ 9.722791@3] IR RC6 protocol handler initialized [ 9.724797@1] systemd[1]: Starting Create Static Device Nodes in /dev... [ 9.725946@3] IR JVC protocol handler initialized [ 9.726977@1] systemd[1]: Starting Journal Service... [ 9.729663@1] systemd[1]: Starting Setup Timezone data... [ 9.731606@0] IR Sony protocol handler initialized [ 9.735401@0] IR SANYO protocol handler initialized [ 9.737433@3] IR MCE Keyboard/mouse protocol handler initialized [ 9.740644@1] systemd[1]: Started Create Static Device Nodes in /dev. [ 9.740864@0] lirc_dev: IR Remote Control driver registered, major 231 [ 9.741098@1] systemd[1]: Reached target Local File Systems (Pre). [ 9.741262@1] systemd[1]: Reached target Local File Systems. [ 9.742041@0] IR LIRC bridge handler initialized [ 9.742672@0] input: MCE IR Keyboard/Mouse (meson-ir) as /devices/virtual/input/input5 [ 9.742982@0] rc rc0: lirc_dev: driver ir-lirc-codec (meson-ir) registered at minor = 0 [ 9.743070@0] meson-ir c8100580.meson-ir: receiver initialized [ 9.744492@1] systemd[1]: Started Load Kernel Modules. [ 9.746666@1] systemd[1]: Starting Apply Kernel Variables... [ 9.759697@1] systemd[1]: Started Apply Kernel Variables. [ 9.760413@1] systemd[1]: Started Setup Timezone data. [ 9.806000@1] systemd[1]: Started Journal Service. [ 9.819289@2] systemd-journald[197]: Received request to flush runtime journal from PID 1 [ 10.450027@3] Console: switching to colour dummy device 80x25 [ 10.672402@2] rtc-pcf8563 1-0051: chip found, driver version 0.4.3 [ 10.672502@2] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) [ 10.672509@2] i2c i2c-1: token 1, master_no(1) 300K addr 0x51 [ 10.672720@2] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) [ 10.672728@2] i2c i2c-1: token 1, master_no(1) 300K addr 0x51 [ 10.672784@2] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) [ 10.672789@2] i2c i2c-1: token 1, master_no(1) 300K addr 0x51 [ 10.672795@2] rtc-pcf8563 1-0051: pcf8563_get_datetime: read error [ 10.673039@2] rtc-pcf8563 1-0051: rtc core: registered rtc-pcf8563 as rtc0 [ 10.814348@2] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) [ 10.814364@2] i2c i2c-1: token 1, master_no(1) 300K addr 0x51 [ 10.814417@2] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) [ 10.814422@2] i2c i2c-1: token 1, master_no(1) 300K addr 0x51 [ 10.814474@2] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) [ 10.814479@2] i2c i2c-1: token 1, master_no(1) 300K addr 0x51 [ 10.814486@2] rtc-pcf8563 1-0051: pcf8563_get_datetime: read error [ 10.889376@2] input: lircd-uinput as /devices/virtual/input/input7 [ 11.065835@2] 8021q: 802.1Q VLAN Support v1.8 [ 11.257262@3] input: eventlircd as /devices/virtual/input/input9 [ 12.285784@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:1 [ 12.355900@1] CPU2: shutdown [ 13.043183@0] fb: osd[0] enable: 1 (kodi.bin) [ 13.288267@0] thermal thermal_zone0: temp:34000, hyst:5000, trip_temp:85000, hot:0 [ 13.289008@2] CPU2: Booted secondary processor [ 14.311720@1] usb 1-1.2: USB disconnect, device number 3 [ 14.477861@0] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1) [ 14.477918@0] aml_spdif_dai: share the same clock [ 14.477930@0] aml_audio_hw: IEC958 PCM32 [ 14.477936@0] hdmitx: audio: aout notify rate 44100 [ 14.477940@0] hdmitx: audio: aout notify size 32 [ 14.477944@0] hdmitx: audio: aout notify format CT_PCM [ 14.477954@0] aml_snd_m8_card aml_m8_snd.40: i2s/958 same source [ 14.478063@0] aml_snd_card: audio speaker on [ 14.487014@0] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1) [ 14.487028@0] aml_spdif_dai: share the same clock [ 14.487038@0] aml_audio_hw: IEC958 PCM32 [ 14.487045@0] hdmitx: audio: aout notify rate 44100 [ 14.487048@0] hdmitx: audio: aout notify size 32 [ 14.487052@0] hdmitx: audio: no update [ 14.487062@0] aml_snd_m8_card aml_m8_snd.40: i2s/958 same source [ 14.487186@0] channel count should be 8, we got 2 aborting [ 14.487629@0] aml_snd_m8_card aml_m8_snd.40: I2S playback enable [ 14.487640@0] aml_snd_m8_card aml_m8_snd.40: IEC958 playback enable [ 15.045904@1] libphy: stmmac-0:00 - Link is Up - 1000/Full [ 15.045929@1] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 15.689041@0] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) [ 15.689060@0] i2c i2c-1: token 1, master_no(1) 300K addr 0x51 [ 15.689110@0] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) [ 15.689116@0] i2c i2c-1: token 1, master_no(1) 300K addr 0x51 [ 15.689165@0] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) [ 15.689173@0] i2c i2c-1: token 1, master_no(1) 300K addr 0x51 [ 15.689181@0] rtc-pcf8563 1-0051: pcf8563_set_datetime: err=-11 addr=02, data=19 [ 15.689266@0] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) [ 15.689271@0] i2c i2c-1: token 1, master_no(1) 300K addr 0x51 [ 15.689324@0] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) [ 15.689330@0] i2c i2c-1: token 1, master_no(1) 300K addr 0x51 [ 15.689379@0] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO) [ 15.689384@0] i2c i2c-1: token 1, master_no(1) 300K addr 0x51 [ 15.689389@0] rtc-pcf8563 1-0051: pcf8563_get_datetime: read error [ 47.549721@0] HOST mode [ 47.579663@0] dwc_otg: -------hcd->flags.d32 = 0 [ 47.579696@0] dwc_otg: Init: Port Power? op_state=1 [ 47.579700@0] dwc_otg: Init1: Power Port (0) [ 47.579709@0] DEBUG:set_usb_vbus_power:: set usb port power on (board gpio 1)! [ 47.579709@0] [ 47.969711@1] dwc_otg: Indeed it is in host mode hprt0 = 00021501 [ 48.149724@1] usb 2-1: new high-speed USB device number 2 using dwc_otg [ 48.152236@1] dwc_otg: Indeed it is in host mode hprt0 = 00001101 [ 48.387777@0] usb 2-1: New USB device found, idVendor=040d, idProduct=3410 [ 48.387790@0] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 48.387795@0] usb 2-1: Product: Audio-gd [ 48.387800@0] usb 2-1: Manufacturer: Audio-gd [ 48.577460@1] input: Audio-gd Audio-gd as /devices/dwc2_a/usb2/2-1/2-1:1.2/0003:040D:3410.0002/input/input10 [ 48.577684@3] hid-generic 0003:040D:3410.0002: input,hidraw0: USB HID v1.00 Device [Audio-gd Audio-gd] on usb-dwc2_a-1/input2 [ 49.409552@0] aml_snd_m8_card aml_m8_snd.40: I2S playback disable [ 49.409566@0] aml_snd_m8_card aml_m8_snd.40: IEC958 playback disable [ 49.409637@0] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1) [ 49.409704@0] aml_spdif_dai: share the same clock [ 49.409715@0] aml_audio_hw: IEC958 PCM32 [ 49.409721@0] hdmitx: audio: aout notify rate 44100 [ 49.409732@0] hdmitx: audio: aout notify size 32 [ 49.409735@0] hdmitx: audio: no update [ 49.409741@0] aml_snd_m8_card aml_m8_snd.40: i2s/958 same source [ 54.419783@0] aml_snd_card: audio speaker off [ 93.096085@0] hdmitx: system: irq 2 [ 93.419821@0] hdmitx: plugin [ 93.549083@0] hdmitx: edid: check sum valid [ 93.549098@0] hdmitx: edid: check sum valid [ 93.549104@0] hdmitx: edid: blk0 raw data [ 93.549163@0] 00ffffffffffff003e8d2700fe020000321a0103800000780af20da754519924 [ 93.549163@0] 104f5c3fcf80317c457c617c81c081fc81009500a940023a801871382d40582c [ 93.549163@0] 450000000000001e000000ff005137324a363530303736360a20000000fc004f [ 93.549163@0] 70746f6d612031303830500a000000ff0037324a3630383131313131313101a6 [ 93.549163@0] [ 93.549163@0] [ 93.549175@0] hdmitx: edid: blk1 raw data [ 93.549210@0] 020325f24d0615021184930514101f20212223090707830100006a030c002000 [ 93.549210@0] 3821208000011d007251d01e206e28550000000000001a011d00bc52d01e20b8 [ 93.549210@0] 28554000000000001e023a80d072382d40102c258000000000001e023a801871 [ 93.549210@0] 382d40502c450000000000001e662156aa51001e30468f330000000000001edf [ 93.549210@0] [ 93.549210@0] [ 93.549223@0] EDID Parser: [ 93.555417@0] hdmitx: edid: find IEEEOUT [ 93.555436@0] hdmitx: edid: check sum valid [ 93.555440@0] hdmitx: edid: check sum valid [ 93.555446@0] hdmitx: update RX hdr info 0 [ 93.557514@0] [RX]-receive ksv list len:1,depth:1,cas:0,dev:0 [ 93.557529@0] hdmitx: video: get current mode: 1080p60hz [ 93.557534@0] hdmitx: update rx hdr info 0 [ 93.557550@0] hdmitx: get ext_name (null) [ 93.557563@0] hdmitx: system: [set_disp_mode_auto] ALREADY init VIC = 16 [ 93.557570@0] hdmtix: set audio [ 93.557583@0] hdmitx tx_aud_src = 0 [ 93.557595@0] hdmitx: system: irq 80000001 [ 93.557645@0] hdmitx: fs = 2, cd = 4, tmds_clk = 148500 [ 93.557649@0] hdmitx aud_n_para = 6272 [ 93.557671@0] hdmitx set channel status [ 93.557741@0] hdmitx: audio: Audio Type: PCM [ 93.557813@0] Start = 0x10000100 End = 0x100001ff [ 93.557825@0] [0x10000103]: 0x00000008 [ 93.557830@0] [0x10000104]: 0x00000001 [ 93.558035@0] [0x10000170]: 0x00000010 [ 93.558069@0] [0x10000180]: 0x000000ff [ 93.558074@0] [0x10000181]: 0x000000ff [ 93.558079@0] [0x10000182]: 0x00000003 [ 93.558084@0] [0x10000183]: 0x00000007 [ 93.558089@0] [0x10000184]: 0x0000003f [ 93.558094@0] [0x10000185]: 0x00000002 [ 93.558100@0] [0x10000187]: 0x000000ff [ 93.558105@0] [0x10000188]: 0x00000003 [ 97.497688@0] hdmitx: system: irq 80000004 [ 97.497744@0] hdmitx: plugout [ 97.497761@0] hdmitx: clear RX hdr info [ 97.798218@0] hdmitx: system: irq 80000002 [ 98.119670@0] hdmitx: plugin [ 98.248920@0] hdmitx: edid: check sum valid [ 98.248938@0] hdmitx: edid: check sum valid [ 98.248944@0] hdmitx: edid: blk0 raw data [ 98.248978@0] 00ffffffffffff003e8d2700fe020000321a0103800000780af20da754519924 [ 98.248978@0] 104f5c3fcf80317c457c617c81c081fc81009500a940023a801871382d40582c [ 98.248978@0] 450000000000001e000000ff005137324a363530303736360a20000000fc004f [ 98.248978@0] 70746f6d612031303830500a000000ff0037324a3630383131313131313101a6 [ 98.248978@0] [ 98.248978@0] [ 98.248989@0] hdmitx: edid: blk1 raw data [ 98.249029@0] 020325f24d0615021184930514101f20212223090707830100006a030c002000 [ 98.249029@0] 3821208000011d007251d01e206e28550000000000001a011d00bc52d01e20b8 [ 98.249029@0] 28554000000000001e023a80d072382d40102c258000000000001e023a801871 [ 98.249029@0] 382d40502c450000000000001e662156aa51001e30468f330000000000001edf [ 98.249029@0] [ 98.249029@0] [ 98.249042@0] EDID Parser: [ 98.249091@0] hdmitx: edid: find IEEEOUT [ 98.249096@0] hdmitx: edid: check sum valid [ 98.249099@0] hdmitx: edid: check sum valid [ 98.249104@0] hdmitx: update RX hdr info 0 [ 98.251152@0] [RX]-receive ksv list len:1,depth:1,cas:0,dev:0 [ 98.251164@0] hdmitx: video: get current mode: 1080p60hz [ 98.251168@0] hdmitx: update rx hdr info 0 [ 98.251186@0] hdmitx: get ext_name 1080p60hz [ 98.251220@0] hdmitx: system: already init VIC = 0 Now VIC = 16 [ 98.251225@0] hdmitx: rx no SCDC present indicator [ 98.253235@0] hdmitx: ddc rd8b error 0x54 0x01 [ 98.255262@0] hdmitx: ddc rd8b error 0x54 0x01 [ 98.255269@0] hdmirx version is 1.4 or below [ 98.255273@0] hdmitx div40: 0 [ 98.279677@0] hdmitx: system: set mode VIC 16 (cd0,cs0,pm1,vd0,1) [ 98.279690@0] hdmitx: system: set pll [ 98.279694@0] hdmitx: system: param->VIC:16 [ 98.279698@0] hdmitx: set clk: VIC = 16 cd = 4 [ 98.279705@0] config HPLL = 2970000 [ 98.279725@0] HPLL: 0xc800023d [ 98.279729@0] config HPLL done [ 98.279737@0] set_hpll_od3_clk_div[441] div = 6 [ 98.279745@0] j = 4 vid_clk_div = 1 [ 98.279768@0] hdmitx: set enc for VIC: 16 [ 98.279785@0] hdmitx_set_hw[4867] set VIC = 16 [ 98.280000@0] hdmitx: system: irq 80000001 [ 98.280110@0] Start = 0x10000100 End = 0x100001ff [ 98.280121@0] [0x10000104]: 0x00000001 [ 98.280332@0] [0x10000180]: 0x000000ff [ 98.280337@0] [0x10000181]: 0x000000ff [ 98.280342@0] [0x10000182]: 0x00000003 [ 98.280346@0] [0x10000183]: 0x00000007 [ 98.280351@0] [0x10000184]: 0x0000003f [ 98.280355@0] [0x10000185]: 0x00000002 [ 98.280361@0] [0x10000187]: 0x000000ff [ 98.280367@0] [0x10000188]: 0x00000003 [ 98.291666@0] hdmitx: ddc w1b error 0x54 0x20 0x00 [ 98.293679@0] hdmitx: ddc w1b error 0x54 0x20 0x00 [ 98.295690@0] hdmitx: ddc rd8b error 0x54 0x21 [ 98.411709@0] hdmitx: system: phy setting done [ 98.415740@0] Sink is HDMI device [ 98.415751@0] hdmitx: system: packet: can't get vendor data [ 98.415757@0] hdmtix: set audio [ 98.415767@0] hdmitx tx_aud_src = 0 [ 98.415803@0] hdmitx: fs = 2, cd = 4, tmds_clk = 148500 [ 98.415808@0] hdmitx aud_n_para = 6272 [ 98.415828@0] hdmitx set channel status [ 98.415892@0] hdmitx: audio: Audio Type: PCM [ 98.415897@0] hdmtix: set audio [ 98.415907@0] hdmitx tx_aud_src = 0 [ 98.415942@0] hdmitx: fs = 2, cd = 4, tmds_clk = 148500 [ 98.415946@0] hdmitx aud_n_para = 6272 [ 98.415965@0] hdmitx set channel status [ 98.416028@0] hdmitx: audio: Audio Type: PCM [ 146.486405@0] WARN::urb_dequeue:783: urb->hcpriv == NULL! urb = ffffffc0651f2400 status=-104 [ 146.486405@0] [ 146.486424@0] WARN::urb_dequeue:783: urb->hcpriv == NULL! urb = ffffffc0651f2300 status=-104 [ 146.486424@0] [ 172.299924@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:1 [ 172.390109@1] CPU2: shutdown [ 173.302304@0] thermal thermal_zone0: temp:41000, hyst:5000, trip_temp:85000, hot:0 [ 173.303054@2] CPU2: Booted secondary processor [ 178.299930@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:1 [ 178.390046@1] CPU2: shutdown [ 179.302305@0] thermal thermal_zone0: temp:41000, hyst:5000, trip_temp:85000, hot:0 [ 179.303048@2] CPU2: Booted secondary processor [ 183.299980@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:1 [ 183.400061@1] CPU3: shutdown [ 184.302305@0] thermal thermal_zone0: temp:41000, hyst:5000, trip_temp:85000, hot:0 [ 184.303052@3] CPU3: Booted secondary processor [ 185.299917@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:1 [ 185.380059@1] CPU2: shutdown [ 186.302326@0] thermal thermal_zone0: temp:57000, hyst:5000, trip_temp:85000, hot:0 [ 186.303069@2] CPU2: Booted secondary processor [ 190.800698@0] Disconnect cb-Host [ 190.809813@3] usb 2-1: USB disconnect, device number 2 [ 190.972100@3] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1) [ 190.972117@3] aml_spdif_dai: share the same clock [ 190.972130@3] aml_audio_hw: IEC958 PCM32 [ 190.972137@3] hdmitx: audio: aout notify rate 44100 [ 190.972141@3] hdmitx: audio: aout notify size 32 [ 190.972144@3] hdmitx: audio: no update [ 190.972158@3] aml_snd_m8_card aml_m8_snd.40: i2s/958 same source [ 190.972280@3] aml_snd_card: audio speaker on [ 190.979914@0] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1) [ 190.979928@0] aml_spdif_dai: share the same clock [ 190.979939@0] aml_audio_hw: IEC958 PCM32 [ 190.979946@0] hdmitx: audio: aout notify rate 44100 [ 190.979950@0] hdmitx: audio: aout notify size 32 [ 190.979953@0] hdmitx: audio: no update [ 190.979965@0] aml_snd_m8_card aml_m8_snd.40: i2s/958 same source [ 190.980215@0] channel count should be 8, we got 2 aborting [ 190.980700@0] aml_snd_m8_card aml_m8_snd.40: I2S playback enable [ 190.980719@0] aml_snd_m8_card aml_m8_snd.40: IEC958 playback enable [ 191.299975@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:1 [ 191.410030@1] CPU3: shutdown [ 192.302306@0] thermal thermal_zone0: temp:42000, hyst:5000, trip_temp:85000, hot:0 [ 192.303044@3] CPU3: Booted secondary processor [ 195.299900@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:1 [ 195.390036@1] CPU2: shutdown [ 196.302297@0] thermal thermal_zone0: temp:57000, hyst:5000, trip_temp:85000, hot:0 [ 196.303036@2] CPU2: Booted secondary processor [ 199.299912@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:1 [ 199.380030@1] CPU2: shutdown [ 200.302305@0] thermal thermal_zone0: temp:42000, hyst:5000, trip_temp:85000, hot:0 [ 200.303048@2] CPU2: Booted secondary processor [ 209.299899@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:1 [ 209.390069@1] CPU2: shutdown [ 210.299896@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:0 [ 210.300630@2] CPU2: Booted secondary processor [ 214.299922@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:1 [ 214.390037@1] CPU2: shutdown [ 215.302289@0] thermal thermal_zone0: temp:58000, hyst:5000, trip_temp:85000, hot:0 [ 215.303025@2] CPU2: Booted secondary processor [ 216.299935@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:1 [ 216.390043@1] CPU2: shutdown [ 217.302318@0] thermal thermal_zone0: temp:42000, hyst:5000, trip_temp:85000, hot:0 [ 217.303069@2] CPU2: Booted secondary processor [ 221.299905@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:1 [ 221.390039@1] CPU2: shutdown [ 222.219760@3] dwc_otg: Indeed it is in host mode hprt0 = 00021501 [ 222.302303@0] thermal thermal_zone0: temp:44000, hyst:5000, trip_temp:85000, hot:0 [ 222.303046@2] CPU2: Booted secondary processor [ 222.399750@3] usb 2-1: new high-speed USB device number 3 using dwc_otg [ 222.402307@3] dwc_otg: Indeed it is in host mode hprt0 = 00001101 [ 222.637805@0] usb 2-1: New USB device found, idVendor=040d, idProduct=3410 [ 222.637819@0] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 222.637824@0] usb 2-1: Product: Audio-gd [ 222.637829@0] usb 2-1: Manufacturer: Audio-gd [ 222.832226@3] input: Audio-gd Audio-gd as /devices/dwc2_a/usb2/2-1/2-1:1.2/0003:040D:3410.0003/input/input11 [ 222.832469@3] hid-generic 0003:040D:3410.0003: input,hidraw0: USB HID v1.00 Device [Audio-gd Audio-gd] on usb-dwc2_a-1/input2 [ 223.813330@0] aml_snd_m8_card aml_m8_snd.40: I2S playback disable [ 223.813346@0] aml_snd_m8_card aml_m8_snd.40: IEC958 playback disable [ 223.813430@3] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1) [ 223.813438@3] aml_spdif_dai: share the same clock [ 223.813448@3] aml_audio_hw: IEC958 PCM32 [ 223.813454@3] hdmitx: audio: aout notify rate 44100 [ 223.813458@3] hdmitx: audio: aout notify size 32 [ 223.813462@3] hdmitx: audio: no update [ 223.813469@3] aml_snd_m8_card aml_m8_snd.40: i2s/958 same source [ 227.299917@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:1 [ 227.390583@1] CPU2: shutdown [ 228.299941@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:0 [ 228.300680@2] CPU2: Booted secondary processor [ 228.819787@3] aml_snd_card: audio speaker off [ 243.299934@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:1 [ 243.390045@1] CPU2: shutdown [ 244.302308@0] thermal thermal_zone0: temp:59000, hyst:5000, trip_temp:85000, hot:0 [ 244.303050@2] CPU2: Booted secondary processor [ 250.299937@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:1 [ 250.390080@1] CPU2: shutdown [ 251.302304@0] thermal thermal_zone0: temp:60000, hyst:5000, trip_temp:85000, hot:0 [ 251.303046@2] CPU2: Booted secondary processor [ 261.299923@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:1 [ 261.390044@1] CPU2: shutdown [ 262.299912@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:0 [ 262.300650@2] CPU2: Booted secondary processor [ 272.299937@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:1 [ 272.370075@1] CPU2: shutdown [ 273.302331@0] thermal thermal_zone0: temp:44000, hyst:5000, trip_temp:85000, hot:0 [ 273.303082@2] CPU2: Booted secondary processor [ 276.299934@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:1 [ 276.390062@1] CPU2: shutdown [ 277.299908@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:0 [ 277.300644@2] CPU2: Booted secondary processor [ 284.299939@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:1 [ 284.370087@1] CPU2: shutdown [ 285.302317@0] thermal thermal_zone0: temp:45000, hyst:5000, trip_temp:85000, hot:0 [ 285.303062@2] CPU2: Booted secondary processor [ 290.299947@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:1 [ 290.390062@1] CPU2: shutdown [ 291.299898@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:0 [ 291.300634@2] CPU2: Booted secondary processor [ 293.299909@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:1 [ 293.400063@1] CPU2: shutdown [ 294.302305@0] thermal thermal_zone0: temp:45000, hyst:5000, trip_temp:85000, hot:0 [ 294.303049@2] CPU2: Booted secondary processor [ 296.334050@0] Disconnect cb-Host [ 296.560116@3] usb 2-1: USB disconnect, device number 3 [ 296.720173@3] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1) [ 296.720188@3] aml_spdif_dai: share the same clock [ 296.720198@3] aml_audio_hw: IEC958 PCM32 [ 296.720204@3] hdmitx: audio: aout notify rate 44100 [ 296.720208@3] hdmitx: audio: aout notify size 32 [ 296.720212@3] hdmitx: audio: no update [ 296.720223@3] aml_snd_m8_card aml_m8_snd.40: i2s/958 same source [ 296.720322@3] aml_snd_card: audio speaker on [ 296.731055@3] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1) [ 296.731069@3] aml_spdif_dai: share the same clock [ 296.731080@3] aml_audio_hw: IEC958 PCM32 [ 296.731087@3] hdmitx: audio: aout notify rate 44100 [ 296.731090@3] hdmitx: audio: aout notify size 32 [ 296.731095@3] hdmitx: audio: no update [ 296.731106@3] aml_snd_m8_card aml_m8_snd.40: i2s/958 same source [ 296.731296@3] channel count should be 8, we got 2 aborting [ 296.731845@3] aml_snd_m8_card aml_m8_snd.40: I2S playback enable [ 296.731860@3] aml_snd_m8_card aml_m8_snd.40: IEC958 playback enable [ 300.356026@0] hdmitx: system: irq 80000004 [ 300.356070@0] hdmitx: plugout [ 300.356087@0] hdmitx: clear RX hdr info [ 304.299908@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:1 [ 304.380037@1] CPU2: shutdown [ 305.299907@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:0 [ 305.300640@2] CPU2: Booted secondary processor [ 308.299906@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:1 [ 308.400046@1] CPU2: shutdown [ 309.302311@0] thermal thermal_zone0: temp:44000, hyst:5000, trip_temp:85000, hot:0 [ 309.303058@2] CPU2: Booted secondary processor [ 314.299932@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:1 [ 314.390036@1] CPU2: shutdown [ 315.302349@0] thermal thermal_zone0: temp:44000, hyst:5000, trip_temp:85000, hot:0 [ 315.303094@2] CPU2: Booted secondary processor [ 316.299921@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:1 [ 316.400052@1] CPU2: shutdown [ 316.969762@0] dwc_otg: Indeed it is in host mode hprt0 = 00021501 [ 317.149740@1] usb 2-1: new high-speed USB device number 4 using dwc_otg [ 317.152253@1] dwc_otg: Indeed it is in host mode hprt0 = 00001101 [ 317.299908@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:0 [ 317.300644@2] CPU2: Booted secondary processor [ 317.387910@1] usb 2-1: New USB device found, idVendor=040d, idProduct=3410 [ 317.387925@1] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 317.387930@1] usb 2-1: Product: Audio-gd [ 317.387935@1] usb 2-1: Manufacturer: Audio-gd [ 317.577407@3] input: Audio-gd Audio-gd as /devices/dwc2_a/usb2/2-1/2-1:1.2/0003:040D:3410.0004/input/input12 [ 317.577623@3] hid-generic 0003:040D:3410.0004: input,hidraw0: USB HID v1.00 Device [Audio-gd Audio-gd] on usb-dwc2_a-1/input2 [ 318.510924@0] aml_snd_m8_card aml_m8_snd.40: I2S playback disable [ 318.510928@0] aml_snd_m8_card aml_m8_snd.40: IEC958 playback disable [ 318.510991@0] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1) [ 318.510995@0] aml_spdif_dai: share the same clock [ 318.511003@0] aml_audio_hw: IEC958 PCM32 [ 318.511007@0] hdmitx: audio: aout notify rate 44100 [ 318.511008@0] hdmitx: audio: aout notify size 32 [ 318.511010@0] hdmitx: audio: no update [ 318.511014@0] aml_snd_m8_card aml_m8_snd.40: i2s/958 same source [ 320.299928@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:1 [ 320.380042@1] CPU2: shutdown [ 321.299967@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:0 [ 321.300707@2] CPU2: Booted secondary processor [ 323.519834@0] aml_snd_card: audio speaker off [ 332.299921@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:1 [ 332.390061@1] CPU2: shutdown [ 333.302308@0] thermal thermal_zone0: temp:44000, hyst:5000, trip_temp:85000, hot:0 [ 333.303048@2] CPU2: Booted secondary processor [ 336.299944@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:1 [ 336.380122@1] CPU2: shutdown [ 337.302314@0] thermal thermal_zone0: temp:60000, hyst:5000, trip_temp:85000, hot:0 [ 337.303054@2] CPU2: Booted secondary processor [ 340.299921@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:1 [ 340.390060@1] CPU2: shutdown [ 341.302299@0] thermal thermal_zone0: temp:44000, hyst:5000, trip_temp:85000, hot:0 [ 341.303038@2] CPU2: Booted secondary processor [ 355.299910@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:1 [ 355.390065@1] CPU2: shutdown [ 356.302315@0] thermal thermal_zone0: temp:45000, hyst:5000, trip_temp:85000, hot:0 [ 356.303053@2] CPU2: Booted secondary processor [ 357.299920@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:1 [ 357.380076@1] CPU2: shutdown [ 358.302317@0] thermal thermal_zone0: temp:45000, hyst:5000, trip_temp:85000, hot:0 [ 358.303056@2] CPU2: Booted secondary processor [ 370.299924@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:1 [ 370.380108@1] CPU2: shutdown [ 371.302297@0] thermal thermal_zone0: temp:45000, hyst:5000, trip_temp:85000, hot:0 [ 371.303039@2] CPU2: Booted secondary processor [ 379.711312@0] hdmitx: system: irq 80000002 [ 380.039696@1] hdmitx: plugin [ 380.168900@1] hdmitx: edid: check sum valid [ 380.168918@1] hdmitx: edid: check sum valid [ 380.168923@1] hdmitx: edid: blk0 raw data [ 380.168956@1] 00ffffffffffff003e8d2700fe020000321a0103800000780af20da754519924 [ 380.168956@1] 104f5c3fcf80317c457c617c81c081fc81009500a940023a801871382d40582c [ 380.168956@1] 450000000000001e000000ff005137324a363530303736360a20000000fc004f [ 380.168956@1] 70746f6d612031303830500a000000ff0037324a3630383131313131313101a6 [ 380.168956@1] [ 380.168956@1] [ 380.168968@1] hdmitx: edid: blk1 raw data [ 380.168999@1] 020325f24d0615021184930514101f20212223090707830100006a030c002000 [ 380.168999@1] 3821208000011d007251d01e206e28550000000000001a011d00bc52d01e20b8 [ 380.168999@1] 28554000000000001e023a80d072382d40102c258000000000001e023a801871 [ 380.168999@1] 382d40502c450000000000001e662156aa51001e30468f330000000000001edf [ 380.168999@1] [ 380.168999@1] [ 380.169012@1] EDID Parser: [ 380.169064@1] hdmitx: edid: find IEEEOUT [ 380.169070@1] hdmitx: edid: check sum valid [ 380.169073@1] hdmitx: edid: check sum valid [ 380.169078@1] hdmitx: update RX hdr info 0 [ 380.171125@1] [RX]-receive ksv list len:1,depth:1,cas:0,dev:0 [ 380.171138@1] hdmitx: video: get current mode: 1080p60hz [ 380.171141@1] hdmitx: update rx hdr info 0 [ 380.171158@1] hdmitx: get ext_name 1080p60hz [ 380.171190@1] hdmitx: system: already init VIC = 0 Now VIC = 16 [ 380.171197@1] hdmitx: rx no SCDC present indicator [ 380.173207@1] hdmitx: ddc rd8b error 0x54 0x01 [ 380.175219@1] hdmitx: ddc rd8b error 0x54 0x01 [ 380.175224@1] hdmirx version is 1.4 or below [ 380.175226@1] hdmitx div40: 0 [ 380.199686@1] hdmitx: system: set mode VIC 16 (cd0,cs0,pm1,vd0,1) [ 380.199699@1] hdmitx: system: set pll [ 380.199703@1] hdmitx: system: param->VIC:16 [ 380.199708@1] hdmitx: set clk: VIC = 16 cd = 4 [ 380.199715@1] config HPLL = 2970000 [ 380.199736@1] HPLL: 0xc800023d [ 380.199740@1] config HPLL done [ 380.199749@1] set_hpll_od3_clk_div[441] div = 6 [ 380.199757@1] j = 4 vid_clk_div = 1 [ 380.199771@1] hdmitx: set enc for VIC: 16 [ 380.199788@1] hdmitx_set_hw[4867] set VIC = 16 [ 380.199988@0] hdmitx: system: irq 80000001 [ 380.200006@0] Start = 0x10000100 End = 0x100001ff [ 380.200018@0] [0x10000104]: 0x00000001 [ 380.200206@0] [0x10000180]: 0x000000ff [ 380.200211@0] [0x10000181]: 0x000000ff [ 380.200229@0] [0x10000182]: 0x00000003 [ 380.200234@0] [0x10000183]: 0x00000007 [ 380.200239@0] [0x10000184]: 0x0000003f [ 380.200244@0] [0x10000185]: 0x00000002 [ 380.200250@0] [0x10000187]: 0x000000ff [ 380.200255@0] [0x10000188]: 0x00000003 [ 380.211679@1] hdmitx: ddc w1b error 0x54 0x20 0x00 [ 380.213692@1] hdmitx: ddc w1b error 0x54 0x20 0x00 [ 380.215701@1] hdmitx: ddc rd8b error 0x54 0x21 [ 380.331694@1] hdmitx: system: phy setting done [ 380.335708@1] Sink is HDMI device [ 380.335734@1] hdmitx: system: packet: can't get vendor data [ 380.335741@1] hdmtix: set audio [ 380.335752@1] hdmitx tx_aud_src = 0 [ 380.335780@1] hdmitx: fs = 2, cd = 4, tmds_clk = 148500 [ 380.335784@1] hdmitx aud_n_para = 6272 [ 380.335806@1] hdmitx set channel status [ 380.335870@1] hdmitx: audio: Audio Type: PCM [ 380.335874@1] hdmtix: set audio [ 380.335885@1] hdmitx tx_aud_src = 0 [ 380.335911@1] hdmitx: fs = 2, cd = 4, tmds_clk = 148500 [ 380.335914@1] hdmitx aud_n_para = 6272 [ 380.335933@1] hdmitx set channel status [ 380.335993@1] hdmitx: audio: Audio Type: PCM [ 383.299899@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:1 [ 383.390070@1] CPU3: shutdown [ 384.299899@0] thermal thermal_zone0: temp:-1000, hyst:5000, trip_temp:85000, hot:0 [ 384.300643@3] CPU3: Booted secondary processor [ 384.602482@0] hdmitx: system: irq 80000004 [ 384.602552@0] hdmitx: plugout [ 384.602571@0] hdmitx: clear RX hdr info [ 384.903102@0] hdmitx: system: irq 80000002 [ 385.229715@0] hdmitx: plugin [ 385.359081@0] hdmitx: edid: check sum valid [ 385.359111@0] hdmitx: edid: check sum valid [ 385.359117@0] hdmitx: edid: blk0 raw data [ 385.359152@0] 00ffffffffffff003e8d2700fe020000321a0103800000780af20da754519924 [ 385.359152@0] 104f5c3fcf80317c457c617c81c081fc81009500a940023a801871382d40582c [ 385.359152@0] 450000000000001e000000ff005137324a363530303736360a20000000fc004f [ 385.359152@0] 70746f6d612031303830500a000000ff0037324a3630383131313131313101a6 [ 385.359152@0] [ 385.359152@0] [ 385.359163@0] hdmitx: edid: blk1 raw data [ 385.359194@0] 020325f24d0615021184930514101f20212223090707830100006a030c002000 [ 385.359194@0] 3821208000011d007251d01e206e28550000000000001a011d00bc52d01e20b8 [ 385.359194@0] 28554000000000001e023a80d072382d40102c258000000000001e023a801871 [ 385.359194@0] 382d40502c450000000000001e662156aa51001e30468f330000000000001edf [ 385.359194@0] [ 385.359194@0] [ 385.359207@0] EDID Parser: [ 385.359274@0] hdmitx: edid: find IEEEOUT [ 385.359279@0] hdmitx: edid: check sum valid [ 385.359282@0] hdmitx: edid: check sum valid [ 385.359288@0] hdmitx: update RX hdr info 0 [ 385.361336@0] [RX]-receive ksv list len:1,depth:1,cas:0,dev:0 [ 385.361357@0] hdmitx: video: get current mode: 1080p60hz [ 385.361359@0] hdmitx: update rx hdr info 0 [ 385.361372@0] hdmitx: get ext_name 1080p60hz [ 385.361405@0] hdmitx: system: already init VIC = 0 Now VIC = 16 [ 385.361409@0] hdmitx: rx no SCDC present indicator [ 385.363425@0] hdmitx: ddc rd8b error 0x54 0x01 [ 385.365444@0] hdmitx: ddc rd8b error 0x54 0x01 [ 385.365450@0] hdmirx version is 1.4 or below [ 385.365454@0] hdmitx div40: 0 [ 385.389697@0] hdmitx: system: set mode VIC 16 (cd0,cs0,pm1,vd0,1) [ 385.389710@0] hdmitx: system: set pll [ 385.389713@0] hdmitx: system: param->VIC:16 [ 385.389717@0] hdmitx: set clk: VIC = 16 cd = 4 [ 385.389750@0] config HPLL = 2970000 [ 385.389771@0] HPLL: 0xc800023d [ 385.389774@0] config HPLL done [ 385.389784@0] set_hpll_od3_clk_div[441] div = 6 [ 385.389792@0] j = 4 vid_clk_div = 1 [ 385.389806@0] hdmitx: set enc for VIC: 16 [ 385.389825@0] hdmitx_set_hw[4867] set VIC = 16 [ 385.390063@0] hdmitx: system: irq 80000001 [ 385.390088@0] Start = 0x10000100 End = 0x100001ff [ 385.390109@0] [0x10000104]: 0x00000001 [ 385.390300@0] [0x10000180]: 0x000000ff [ 385.390305@0] [0x10000181]: 0x000000ff [ 385.390310@0] [0x10000182]: 0x00000003 [ 385.390314@0] [0x10000183]: 0x00000007 [ 385.390319@0] [0x10000184]: 0x0000003f [ 385.390324@0] [0x10000185]: 0x00000002 [ 385.390330@0] [0x10000187]: 0x000000ff [ 385.390334@0] [0x10000188]: 0x00000003 [ 385.401691@0] hdmitx: ddc w1b error 0x54 0x20 0x00 [ 385.403706@0] hdmitx: ddc w1b error 0x54 0x20 0x00 [ 385.405720@0] hdmitx: ddc rd8b error 0x54 0x21 [ 385.521707@0] hdmitx: system: phy setting done [ 385.525727@0] Sink is HDMI device [ 385.525749@0] hdmitx: system: packet: can't get vendor data [ 385.525755@0] hdmtix: set audio [ 385.525790@0] hdmitx tx_aud_src = 0 [ 385.525822@0] hdmitx: fs = 2, cd = 4, tmds_clk = 148500 [ 385.525828@0] hdmitx aud_n_para = 6272 [ 385.525849@0] hdmitx set channel status [ 385.525931@0] hdmitx: audio: Audio Type: PCM [ 385.525937@0] hdmtix: set audio [ 385.525948@0] hdmitx tx_aud_src = 0 [ 385.525976@0] hdmitx: fs = 2, cd = 4, tmds_clk = 148500 [ 385.525980@0] hdmitx aud_n_para = 6272 [ 385.526002@0] hdmitx set channel status [ 385.526084@0] hdmitx: audio: Audio Type: PCM [ 386.579470@0] WARN::urb_dequeue:783: urb->hcpriv == NULL! urb = ffffffc059dedd00 status=-104 [ 386.579470@0] [ 386.579500@0] WARN::urb_dequeue:783: urb->hcpriv == NULL! urb = ffffffc059dedb00 status=-104 [ 386.579500@0] [ 386.606011@2] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1) [ 386.606015@2] aml_spdif_dai: share the same clock [ 386.606023@2] aml_audio_hw: IEC958 PCM32 [ 386.606027@2] hdmitx: audio: aout notify rate 44100 [ 386.606029@2] hdmitx: audio: aout notify size 32 [ 386.606030@2] hdmitx: audio: no update [ 386.606039@2] aml_snd_m8_card aml_m8_snd.40: i2s/958 same source [ 386.606209@2] aml_snd_card: audio speaker on [ 386.609845@0] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1) [ 386.609858@0] aml_spdif_dai: share the same clock [ 386.609869@0] aml_audio_hw: IEC958 PCM32 [ 386.609875@0] hdmitx: audio: aout notify rate 44100 [ 386.609879@0] hdmitx: audio: aout notify size 32 [ 386.609883@0] hdmitx: audio: no update [ 386.609895@0] aml_snd_m8_card aml_m8_snd.40: i2s/958 same source [ 386.610091@0] channel count should be 8, we got 2 aborting [ 386.611717@0] aml_snd_m8_card aml_m8_snd.40: I2S playback enable [ 386.611730@0] aml_snd_m8_card aml_m8_snd.40: IEC958 playback enable [ 461.658231@0] aml_snd_m8_card aml_m8_snd.40: I2S playback disable [ 461.658249@0] aml_snd_m8_card aml_m8_snd.40: IEC958 playback disable [ 461.658322@0] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1) [ 461.658329@0] aml_spdif_dai: share the same clock [ 461.658338@0] aml_audio_hw: IEC958 PCM32 [ 461.658345@0] hdmitx: audio: aout notify rate 44100 [ 461.658349@0] hdmitx: audio: aout notify size 32 [ 461.658353@0] hdmitx: audio: no update [ 461.658358@0] aml_snd_m8_card aml_m8_snd.40: i2s/958 same source [ 461.658889@0] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1) [ 461.658894@0] aml_spdif_dai: share the same clock [ 461.658902@0] aml_audio_hw: IEC958 PCM32 [ 461.658906@0] hdmitx: audio: aout notify rate 44100 [ 461.658910@0] hdmitx: audio: aout notify size 32 [ 461.658913@0] hdmitx: audio: no update [ 461.658919@0] aml_snd_m8_card aml_m8_snd.40: i2s/958 same source [ 466.659862@0] aml_snd_card: audio speaker off [ 562.302292@0] Disconnect cb-Host [ 562.309800@3] usb 2-1: USB disconnect, device number 4 [ 562.470431@3] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1) [ 562.470436@3] aml_spdif_dai: share the same clock [ 562.470446@3] aml_audio_hw: IEC958 PCM32 [ 562.470450@3] hdmitx: audio: aout notify rate 44100 [ 562.470452@3] hdmitx: audio: aout notify size 32 [ 562.470453@3] hdmitx: audio: no update [ 562.470462@3] aml_snd_m8_card aml_m8_snd.40: i2s/958 same source [ 562.470566@3] aml_snd_card: audio speaker on [ 562.480938@3] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1) [ 562.480953@3] aml_spdif_dai: share the same clock [ 562.480962@3] aml_audio_hw: IEC958 PCM32 [ 562.480969@3] hdmitx: audio: aout notify rate 44100 [ 562.480972@3] hdmitx: audio: aout notify size 32 [ 562.480976@3] hdmitx: audio: no update [ 562.480987@3] aml_snd_m8_card aml_m8_snd.40: i2s/958 same source [ 562.481165@3] channel count should be 8, we got 2 aborting [ 562.481624@3] aml_snd_m8_card aml_m8_snd.40: I2S playback enable [ 562.481634@3] aml_snd_m8_card aml_m8_snd.40: IEC958 playback enable [ 565.469757@3] dwc_otg: Indeed it is in host mode hprt0 = 00021501 [ 565.649720@3] usb 2-1: new high-speed USB device number 5 using dwc_otg [ 565.652256@3] dwc_otg: Indeed it is in host mode hprt0 = 00001101 [ 565.887827@3] usb 2-1: New USB device found, idVendor=040d, idProduct=3410 [ 565.887832@3] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 565.887835@3] usb 2-1: Product: Audio-gd [ 565.887838@3] usb 2-1: Manufacturer: Audio-gd [ 566.079816@3] input: Audio-gd Audio-gd as /devices/dwc2_a/usb2/2-1/2-1:1.2/0003:040D:3410.0005/input/input13 [ 566.080297@3] hid-generic 0003:040D:3410.0005: input,hidraw0: USB HID v1.00 Device [Audio-gd Audio-gd] on usb-dwc2_a-1/input2 [ 567.031528@0] aml_snd_m8_card aml_m8_snd.40: I2S playback disable [ 567.031543@0] aml_snd_m8_card aml_m8_snd.40: IEC958 playback disable [ 567.031601@3] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1) [ 567.031610@3] aml_spdif_dai: share the same clock [ 567.031621@3] aml_audio_hw: IEC958 PCM32 [ 567.031627@3] hdmitx: audio: aout notify rate 44100 [ 567.031632@3] hdmitx: audio: aout notify size 32 [ 567.031635@3] hdmitx: audio: no update [ 567.031641@3] aml_snd_m8_card aml_m8_snd.40: i2s/958 same source [ 572.039769@3] aml_snd_card: audio speaker off [ 573.623164@0] hdmitx: system: irq 80000004 [ 573.623224@0] hdmitx: plugout [ 573.623241@0] hdmitx: clear RX hdr info [ 684.512889@0] WARN::urb_dequeue:783: urb->hcpriv == NULL! urb = ffffffc0651ea600 status=-104 [ 684.512889@0]
Optional Paste Settings
Category:
None
Cryptocurrency
Cybersecurity
Fixit
Food
Gaming
Haiku
Help
History
Housing
Jokes
Legal
Money
Movies
Music
Pets
Photo
Science
Software
Source Code
Spirit
Sports
Travel
TV
Writing
Tags:
Syntax Highlighting:
None
Bash
C
C#
C++
CSS
HTML
JSON
Java
JavaScript
Lua
Markdown (PRO members only)
Objective C
PHP
Perl
Python
Ruby
Swift
4CS
6502 ACME Cross Assembler
6502 Kick Assembler
6502 TASM/64TASS
ABAP
AIMMS
ALGOL 68
APT Sources
ARM
ASM (NASM)
ASP
ActionScript
ActionScript 3
Ada
Apache Log
AppleScript
Arduino
Asymptote
AutoIt
Autohotkey
Avisynth
Awk
BASCOM AVR
BNF
BOO
Bash
Basic4GL
Batch
BibTeX
Blitz Basic
Blitz3D
BlitzMax
BrainFuck
C
C (WinAPI)
C Intermediate Language
C for Macs
C#
C++
C++ (WinAPI)
C++ (with Qt extensions)
C: Loadrunner
CAD DCL
CAD Lisp
CFDG
CMake
COBOL
CSS
Ceylon
ChaiScript
Chapel
Clojure
Clone C
Clone C++
CoffeeScript
ColdFusion
Cuesheet
D
DCL
DCPU-16
DCS
DIV
DOT
Dart
Delphi
Delphi Prism (Oxygene)
Diff
E
ECMAScript
EPC
Easytrieve
Eiffel
Email
Erlang
Euphoria
F#
FO Language
Falcon
Filemaker
Formula One
Fortran
FreeBasic
FreeSWITCH
GAMBAS
GDB
GDScript
Game Maker
Genero
Genie
GetText
Go
Godot GLSL
Groovy
GwBasic
HQ9 Plus
HTML
HTML 5
Haskell
Haxe
HicEst
IDL
INI file
INTERCAL
IO
ISPF Panel Definition
Icon
Inno Script
J
JCL
JSON
Java
Java 5
JavaScript
Julia
KSP (Kontakt Script)
KiXtart
Kotlin
LDIF
LLVM
LOL Code
LScript
Latex
Liberty BASIC
Linden Scripting
Lisp
Loco Basic
Logtalk
Lotus Formulas
Lotus Script
Lua
M68000 Assembler
MIX Assembler
MK-61/52
MPASM
MXML
MagikSF
Make
MapBasic
Markdown (PRO members only)
MatLab
Mercury
MetaPost
Modula 2
Modula 3
Motorola 68000 HiSoft Dev
MySQL
Nagios
NetRexx
Nginx
Nim
NullSoft Installer
OCaml
OCaml Brief
Oberon 2
Objeck Programming Langua
Objective C
Octave
Open Object Rexx
OpenBSD PACKET FILTER
OpenGL Shading
Openoffice BASIC
Oracle 11
Oracle 8
Oz
PARI/GP
PCRE
PHP
PHP Brief
PL/I
PL/SQL
POV-Ray
ParaSail
Pascal
Pawn
Per
Perl
Perl 6
Phix
Pic 16
Pike
Pixel Bender
PostScript
PostgreSQL
PowerBuilder
PowerShell
ProFTPd
Progress
Prolog
Properties
ProvideX
Puppet
PureBasic
PyCon
Python
Python for S60
QBasic
QML
R
RBScript
REBOL
REG
RPM Spec
Racket
Rails
Rexx
Robots
Roff Manpage
Ruby
Ruby Gnuplot
Rust
SAS
SCL
SPARK
SPARQL
SQF
SQL
SSH Config
Scala
Scheme
Scilab
SdlBasic
Smalltalk
Smarty
StandardML
StoneScript
SuperCollider
Swift
SystemVerilog
T-SQL
TCL
TeXgraph
Tera Term
TypeScript
TypoScript
UPC
Unicon
UnrealScript
Urbi
VB.NET
VBScript
VHDL
VIM
Vala
Vedit
VeriLog
Visual Pro Log
VisualBasic
VisualFoxPro
WHOIS
WhiteSpace
Winbatch
XBasic
XML
XPP
Xojo
Xorg Config
YAML
YARA
Z80 Assembler
ZXBasic
autoconf
jQuery
mIRC
newLISP
q/kdb+
thinBasic
Paste Expiration:
Never
Burn after read
10 Minutes
1 Hour
1 Day
1 Week
2 Weeks
1 Month
6 Months
1 Year
Paste Exposure:
Public
Unlisted
Private
Folder:
(members only)
Password
NEW
Enabled
Disabled
Burn after read
NEW
Paste Name / Title:
Create New Paste
Hello
Guest
Sign Up
or
Login
Sign in with Facebook
Sign in with Twitter
Sign in with Google
You are currently not logged in, this means you can not edit or delete anything you paste.
Sign Up
or
Login
Public Pastes
✅✅✅ EARN 12,500$ IN LESS THAN 10 MINUTES OF W...
JavaScript | 2 min ago | 0.67 KB
BIG TECH BLOCKER v2.2
Batch | 2 min ago | 6.83 KB
Infinite Money Glitch
JavaScript | 12 min ago | 0.67 KB
Blade Ball Script (My Version)
Lua | 19 min ago | 19.62 KB
🚨🚨 Earn 18,000$ Monthly Leaked Guide 🚨🚨
JavaScript | 22 min ago | 0.67 KB
🔥🔥🔥 QUICK $2,500 IN 2 HOURS
JavaScript | 32 min ago | 0.67 KB
💎 From Zero to a Millionaire PDF 💎
JavaScript | 43 min ago | 0.67 KB
🔥🔥 ELON'S BTC STRATEGY 🔥🔥
JavaScript | 53 min ago | 0.67 KB
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the
Cookies Policy
.
OK, I Understand
Not a member of Pastebin yet?
Sign Up
, it unlocks many cool features!
