pzem oled bt nfc

// library PZEM
#include <PZEM004T.h>

// Libary OLED
#include "Arduino.h"
#include "Wire.h"
#include "Adafruit_GFX.h"
#include "Adafruit_SSD1306.h"

// library NFC
#include <SPI.h>
#include <Adafruit_PN532.h>

#define PN532_SCK  (PA5)
#define PN532_MOSI (PA7)
#define PN532_SS   (PA4)
#define PN532_MISO (PA6)
#define PN532_IRQ   (2)
#define PN532_RESET (3)

Adafruit_PN532 nfc(PN532_SCK, PN532_MISO, PN532_MOSI, PN532_SS);
#if defined(ARDUINO_ARCH_SAMD)
#define Serial SerialUSB
#endif

// oled pin = B6 B7 / SCL SDA
// pzem pin = A9 A10 / TX RX / Serial1
// nfc pin = SPI
// bt pin = serial uart 2

#define OLED_RESET 4
Adafruit_SSD1306 display(OLED_RESET);

PZEM004T* pzem;
IPAddress ip(192, 168, 1, 1);


// START NFC
void setup(void)
{
#ifndef ESP8266
#endif
  Serial.begin(115200);
  Serial.println("Hello Arif!");

  nfc.begin();

  uint32_t versiondata = nfc.getFirmwareVersion();
  if (! versiondata) {
    Serial.print("Didn't find PN53x board");
    while (1); // halt
  }

  nfc.SAMConfig();

  Serial.println("  Tempelkan kartu pelanggan");

  display.begin(SSD1306_SWITCHCAPVCC, 0x3C);
  display.clearDisplay();
}

String str1, str3;
String str2 = "0xC6 0xE6 0x0F 0x1E";
void loop(void)
{
  uint8_t success;
  uint8_t uid[] = { 0, 0, 0, 0, 0, 0, 0 };
  uint8_t uidLength;

  success = nfc.readPassiveTargetID(PN532_MIFARE_ISO14443A, uid, &uidLength);

  if (success)
  {
    String str22 = hexify(uid, uidLength);
    results(str22);
  }
}

String hexify(uint8_t u[], byte len)
{
  String out = "";
  for (byte i = 0; i < len; i++)
  {
    String a = String(u[i], HEX);
    a.toUpperCase();
    if (a.length() == 1) a = "0" + a;
    out += "0x" + a + " ";
  }
  out.trim();
  return out;
}

void results(String str)
{
  if (str == str2)
  {
    display.clearDisplay();
    display.setTextSize(1);
    display.setTextColor(WHITE);

    display.setCursor(0, 0);
    display.print("1303167045");
    display.display();

    Serial.println("\n  1303167045");
  }
  else
  {
    display.clearDisplay();
    display.setTextSize(1);
    display.setTextColor(WHITE);

    display.setCursor(0, 0);
    display.print("Bukan pelanggan");
    display.display();

    Serial.println("\n  Bukan pelanggan");
  }
  Serial.print("");
}
// STOP NFC

void mulai()
{
  Serial.begin(115200);   //serial untuk membaca PZEM
  Serial2.begin(9600);    //serial BT HC 05
  Serial2.println("\nBismillah");

  pzem = new PZEM004T(&Serial1);
  pzem->setAddress(ip);

  display.begin(SSD1306_SWITCHCAPVCC, 0x3C);
  display.clearDisplay();
}

void looping()
{
  float v = pzem->voltage(ip);
  if (v < 0.0) v = 0.0;
  Serial.print(v);
  Serial.print("V; ");

  float i = pzem->current(ip);
  if (i >= 0.0)
  {
    Serial.print(i);
    Serial.print("A; ");
  }

  float p = pzem->power(ip);
  if (p >= 0.0)
  {
    Serial.print(p);
    Serial.print("W; ");
  }

  float e = pzem->energy(ip);
  if (e >= 0.0)
  {
    Serial.print(e);
    Serial.print("Wh; ");
  }

  float c = p / (v * i);
  float cosphi;

  Serial.println();

  displayData(v, i, p, e, c);
}

void displayData(float tegangan, float arus, float daya, float energi, float cosphi)
{
  display.clearDisplay();
  display.setTextSize(1);
  display.setTextColor(WHITE);
  display.setCursor(0, 0);
  display.print("Tegangan: ");
  display.setCursor(80, 0);
  display.print(tegangan);
  display.println(" V");

  display.setCursor(0, 8);
  display.print("Arus: ");
  display.setCursor(80, 8);
  display.print(arus);
  display.println(" A");

  display.setCursor(0, 16);
  display.print("Daya: ");
  display.setCursor(80, 16);
  display.print(daya);
  display.println(" W");

  display.setCursor(0, 24);
  display.print("Energi: ");
  display.setCursor(80, 24);
  display.print(energi);
  display.println(" Wh");

  display.display();

  char buffer[200];

  sprintf(buffer, "Tegangan  : %0.2f V\nArus      : %0.2f A\nDaya      : %0.2f W\nEnergi    : %0.2f Wh\nCos Phi   : %0.2f \n", tegangan, arus, daya, energi, cosphi);
  Serial2.println(buffer);
}