Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- CPU-Z Readme file
- ------------------
- Version 1.81.1
- October 2017
- Contact : cpuz@cpuid.com
- Web page: http://www.cpuid.com/softwares/cpu-z.html
- Validation page : http://valid.x86.fr/
- Hall of Fame : http://valid.x86.fr/records.php
- CPUID SDK : http://www.cpuid-pro.com/products-services.php
- Configuration file (cpuz.ini)
- ------------------------------
- The configuration file must be named cpuz.ini and be present at the same directory level
- as cpuz.exe. It contains the following :
- [CPU-Z]
- VERSION=x.x.x.x
- TextFontName=
- TextFontSize=14
- TextFontColor=000080
- LabelFontName=
- LabelFontSize=14
- ACPI=1
- PCI=1
- MaxPCIBus=256
- DMI=1
- Sensor=1
- SMBus=1
- Display=1
- UseDisplayAPI=1
- BusClock=1
- Chipset=1
- SPD=1
- XOC=0
- CheckUpdates=1
- - TextFontName : Font used for the information boxes.
- - TextFontSize : Size of the font used for the information boxes.
- - TextFontColor : Color of the font used for the information boxes. Value is expressed in hexadecimal, and consists in a classic Red/Green/Blue color code : RRGGBB
- - LabelFontName : Font used for the label boxes.
- - LabelFontSize : Size of the font used for the label boxes.
- - Sensor : Set to OFF (or 0) disables sensor chip detection and voltages measurement. 1 to enable.
- - PCI : Set to OFF (or 0) disables the PCI information. This disables chipset, SPD and, depending on the hardware, sensoring information. 1 to enable.
- - MaxPCIBus : Sets the maximum PCI bus to scan. Default value is 256.
- - DMI : Set to OFF (or 0) disables the DMI (Desktop Management Interface) information. This concerns BIOS vendor and version, motherboard vendor and revision. 1 to enable.
- - SMBus : Set to OFF (or 0) disables SMBus information : SPD, and, depending on the hardware, sensoring information. 1 to enable.
- - Display : Set to OFF (or 0) disables the video card information reported in the validator. 1 to enable.
- - UseDisplayAPI : Set to 1, uses the display driver to read the display adapters information.
- - BusClock : Set to 1, uses the bus clock as primary clock source. Set to 0 to use an alternate method.
- - Chipset : set to OFF (or 0) disables the memory controller and southbridge information. 1 to enable.
- - SPD : set to 0 to disable SPD reading. 1 to enable.
- - XOC : eXtreme Overclock Mode : runs CPU-Z with as little system load as possible. Your system won't be fully validated before it is manually checked. Requires to restart CPU-Z.
- - CheckUpdates : set to 0 to disable the new version checker at startup. 1 to enable.
- Parameters
- ----------
- -txt=filename : Launch CPU-Z in ghost mode (no interface appears) and generates the register dump file (.txt)
- in the same directory as the exe file.
- -html=filename : Same as "-txt" except it generates the html report.
- -core=id : Displays clock speed of core #id (id can be set from 0 to Number of cores minus one).
- Keys
- ----
- F5 : save the current tab in a bmp file
- F6 : save the current tab in the clipboard
- https://pastebin.com/V6A1Eg2J
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement