Agat-Aquarius

Elbrus 401-PC boot log (dmesg) - automatic

Jan 25th, 2016
728
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. Linux version 2.6.33-elbrus.033.6.57 (gavrilova_tg@e2k13) (gcc version 4.4.0 compatible.) #1 SMP Sun Oct 11 00:10:58 MSK 2015
  2. MSI supported
  3. bootconsole [early_dump0] enabled
  4. ARCH: E2K MACHINE TYPE: e2s IOHUB , ID 00e3, REVISION: 001 SERIAL # UNKNOWN
  5. Kernel image check sum: 1269370122
  6. On node 0 totalpages: 6242684
  7. free_area_init_node: node 0, pgdat e20001dab580, node_mem_map d01020700000
  8. DMA zone: 231168 pages exceeds realsize 131072
  9. DMA zone: 0 pages reserved
  10. DMA zone: 131072 pages, LIFO batch:31
  11. Normal zone: 83558 pages used for memmap
  12. Normal zone: 6028054 pages, LIFO batch:31
  13. ACPI Error: A valid RSDP was not found (20091214/tbxfroot-219)
  14. found SMP MP-table at 0x0000d00000663000
  15. MultiProcessor Specification v1.4
  16. Virtual Wire compatibility mode.
  17. OEM ID: LNXI Product ID: 440GX APIC at: 0xFEE00000
  18. Processor APIC ID #0 version 20
  19. Processor APIC ID #1 version 20
  20. Processor APIC ID #2 version 20
  21. Processor APIC ID #3 version 20
  22. IO link #0 on node 0, version 0x15, connected to IOHUB: min bus #1 max bus #3 IO APIC ID 16
  23. System timer type 1 Version 1 at 0x83200000.
  24. i2c_spi_info: control base addr = 0000000091000000, data base addr = 0000000083000040, IRQ 23 IOHUB revision 05
  25. I/O APIC #16 Version 17 at 0xFEC00000.
  26. Processors: 4
  27. nr_irqs_gsi: 24
  28. Setting jiffies clock source multiplier to -1734967296
  29. PERCPU: Embedded 12 pages/cpu @0000d01034e0c000 s18720 r8192 d22240 u65536
  30. pcpu-alloc: s18720 r8192 d22240 u65536 alloc=16*4096
  31. pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  32. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 6159126
  33. Policy zone: Normal
  34. Kernel command line: console=tty0 console=ttyS0,115200 consoleblank=0 hardreset REBOOT root=/dev/sda3 video=DVI-D-1:1024x768-24@60 video=VGA-1:1024x768-24@60 fbcon=map:10
  35. PID hash table entries: 4096 (order: 3, 32768 bytes)
  36. No need to allocate secondary space: machine is E3S, UPT is on.
  37. Memory: 24581828k available 388908k reserved (28676k kernel code, 1440k data, 1436k init) [0000d00000000000,00000015f417c000]
  38. Memory total mapped pages number 0x15f417c : valid 0x5f417c, invalid 0x1000000
  39. Node 0 DMA per-cpu:
  40. CPU 0: hi: 0, btch: 1 usd: 0
  41. Node 0 Normal per-cpu:
  42. CPU 0: hi: 0, btch: 1 usd: 0
  43. active_anon:0 inactive_anon:0 isolated_anon:0
  44. active_file:0 inactive_file:0 isolated_file:0
  45. unevictable:0 dirty:0 writeback:0 unstable:0
  46. free:6145457 slab_reclaimable:0 slab_unreclaimable:0
  47. mapped:0 shmem:0 pagetables:0 bounce:0
  48. Node 0 DMA free:477672kB min:0kB low:0kB high:0kB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:524288kB mlocked:0kB dirty:0kB writeback:0kB mapped:0kB shmem:0kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:0kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no
  49. lowmem_reserve[]: 0 0 0
  50. Node 0 Normal free:24104156kB min:0kB low:0kB high:0kB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:24112216kB mlocked:0kB dirty:0kB writeback:0kB mapped:0kB shmem:0kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:0kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no
  51. lowmem_reserve[]: 0 0 0
  52. Node 0 DMA: 2*4kB 4*8kB 2*16kB 3*32kB 3*64kB 3*128kB 1*256kB 3*512kB 4*1024kB 0*2048kB 1*4096kB 1*8192kB 0*16384kB 14*32768kB = 477672kB
  53. Node 0 Normal: 1*4kB 1*8kB 3*16kB 1*32kB 2*64kB 2*128kB 1*256kB 1*512kB 2*1024kB 0*2048kB 0*4096kB 0*8192kB 1*16384kB 735*32768kB = 24104156kB
  54. 0 total pagecache pages
  55. 0 pages in swap cache
  56. Swap cache stats: add 0, delete 0, find 0/0
  57. Free swap = 0kB
  58. Total swap = 0kB
  59. Hierarchical RCU implementation.
  60. NR_IRQS:1024 nr_irqs:666
  61. Setting APIC routing to physical flat
  62. RDMA lvt2 enabled on NODE#0 CPU#0.
  63. alloc irq_desc for 16 on node 0
  64. alloc kstat_irqs on node 0
  65. alloc irq_desc for 17 on node 0
  66. alloc kstat_irqs on node 0
  67. alloc irq_desc for 18 on node 0
  68. alloc kstat_irqs on node 0
  69. alloc irq_desc for 19 on node 0
  70. alloc kstat_irqs on node 0
  71. alloc irq_desc for 20 on node 0
  72. alloc kstat_irqs on node 0
  73. alloc irq_desc for 21 on node 0
  74. alloc kstat_irqs on node 0
  75. alloc irq_desc for 23 on node 0
  76. alloc kstat_irqs on node 0
  77. Console: colour dummy device 80x25
  78. console [tty0] enabled
  79. Serial 8250/16550: console probe ... is not detected
  80. Zilog: console probe ...Zilog: console init port 0, control_reg = 0xe40000004040
  81. Zilog: console init port 1, control_reg = 0xe40000004042
  82. found
  83. console [ttyS0] enabled, bootconsole disabled
  84. Node #0 IO LINK #0 is IO HUB controller ON connected to IO HUB controller
  85. Calibrating delay using timer specific routine.. 1600.82 BogoMIPS (lpj=8004117)
  86. Security Framework initialized
  87. Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
  88. Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
  89. Mount-cache hash table entries: 256
  90. CPU0: APIC ID 0
  91. cpu_data[0]:
  92. proc_freq 800000965
  93. loops_per_jiffy == 8004117
  94. MACHINE TYPE: e2s IOHUB , ID 00e3, REVISION: 001
  95. copy_thread(): idle clone : return
  96. Secondary virtual space translations is enabled on CPU #1
  97. e2k_do_start_secondary, before setup_local_APIC().
  98. RDMA lvt2 masked on NODE#0 CPU#1.
  99. cpu_data[1]:
  100. proc_freq 800000965
  101. loops_per_jiffy == 8004117
  102. copy_thread(): idle clone : return
  103. Secondary virtual space translations is enabled on CPU #2
  104. e2k_do_start_secondary, before setup_local_APIC().
  105. RDMA lvt2 masked on NODE#0 CPU#2.
  106. cpu_data[2]:
  107. proc_freq 800000965
  108. loops_per_jiffy == 8004117
  109. copy_thread(): idle clone : return
  110. Secondary virtual space translations is enabled on CPU #3
  111. e2k_do_start_secondary, before setup_local_APIC().
  112. RDMA lvt2 masked on NODE#0 CPU#3.
  113. cpu_data[3]:
  114. proc_freq 800000965
  115. loops_per_jiffy == 11256449
  116. Brought up 4 CPUs
  117. Total of 4 processors activated (8026.80 BogoMIPS).
  118. NET: Registered protocol family 16
  119. IOMMU:0:0: enabled; window size 4096 MiB
  120. External signal is used for SCLKR.
  121. PCI: Using Elbrus configuration type
  122. bio: create slab <bio-0> at 0
  123. ACPI: Interpreter disabled.
  124. vgaarb: loaded
  125. SCSI subsystem initialized
  126. libata version 3.00 loaded.
  127. usbcore: registered new interface driver usbfs
  128. usbcore: registered new interface driver hub
  129. usbcore: registered new device driver usb
  130. LinuxPPS API ver. 1 registered
  131. Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  132. PCI: Probing PCI hardware (bus 00)
  133. pci 0000:00:00.0: reg 10: [mem 0x84000000-0x84000fff 64bit]
  134. pci 0000:00:00.0: supports D1 D2
  135. pci 0000:00:00.0: PME# supported from D0 D1 D3hot D3cold
  136. pci 0000:00:00.0: PME# disabled
  137. pci 0000:03:00.0: reg 10: [mem 0xa0000000-0xafffffff 64bit pref]
  138. pci 0000:03:00.0: reg 18: [mem 0x85000000-0x8501ffff 64bit]
  139. pci 0000:03:00.0: reg 20: [io 0x2000-0x20ff]
  140. pci 0000:03:00.0: reg 30: [mem 0xb0000000-0xb001ffff pref]
  141. pci 0000:03:00.0: supports D1 D2
  142. pci 0000:03:00.1: reg 10: [mem 0x85020000-0x85023fff 64bit]
  143. pci 0000:03:00.1: supports D1 D2
  144. pci 0000:00:00.0: PCI bridge to [bus 03-03]
  145. pci 0000:00:00.0: bridge window [io 0x2000-0x2fff]
  146. pci 0000:00:00.0: bridge window [mem 0x85000000-0x85ffffff]
  147. pci 0000:00:00.0: bridge window [mem 0x92000000-0xb0ffffff pref]
  148. pci 0000:01:01.0: reg 10: [mem 0x83000000-0x8300001f]
  149. pci 0000:01:02.0: reg 10: [io 0x1000-0x1007]
  150. pci 0000:01:02.0: reg 14: [io 0x1008-0x100b]
  151. pci 0000:01:02.0: reg 18: [io 0x1010-0x1017]
  152. pci 0000:01:02.0: reg 1c: [io 0x1018-0x101b]
  153. pci 0000:01:02.0: reg 20: [io 0x1020-0x102f]
  154. pci 0000:01:02.1: reg 10: [mem 0x91000000-0x9100003f pref]
  155. pci 0000:01:02.1: reg 14: [mem 0x83000040-0x8300007f pref]
  156. pci 0000:01:02.2: reg 10: [io 0x1040-0x105f]
  157. pci 0000:01:02.2: reg 14: [mem 0x83200040-0x8320004f]
  158. pci 0000:01:02.3: reg 10: [mem 0x83201000-0x83201fff]
  159. pci 0000:01:02.3: reg 14: [mem 0x83202000-0x83202fff]
  160. pci 0000:01:03.0: reg 24: [mem 0x83204000-0x83205fff]
  161. pci 0000:01:04.0: reg 10: [mem 0x83206000-0x83206fff]
  162. pci 0000:01:04.1: reg 10: [mem 0x83207000-0x832070ff]
  163. pci 0000:00:01.0: PCI bridge to [bus 01-02]
  164. pci 0000:00:01.0: bridge window [io 0x1000-0x1fff]
  165. pci 0000:00:01.0: bridge window [mem 0x80000000-0x83ffffff]
  166. pci 0000:00:01.0: bridge window [mem 0x90000000-0x91ffffff 64bit pref]
  167. pci 0000:02:03.0: reg 10: [mem 0x81000000-0x81ffffff]
  168. pci 0000:02:03.0: reg 14: [mem 0x82000000-0x821fffff]
  169. pci 0000:02:03.0: reg 30: [mem 0x90000000-0x9000ffff pref]
  170. pci 0000:02:03.0: supports D1 D2
  171. pci 0000:01:00.0: PCI bridge to [bus 02-02]
  172. pci 0000:01:00.0: bridge window [mem 0x81000000-0x82ffffff]
  173. pci 0000:01:00.0: bridge window [mem 0x90000000-0x90ffffff 64bit pref]
  174. vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=none,locks=none
  175. vgaarb: device added: PCI:0000:02:03.0,decodes=io+mem,owns=none,locks=none
  176. PCI->APIC IRQ transform: (D0, B3,S0,F0, P0) -> 16
  177. PCI->APIC IRQ transform: (D0, B3,S0,F1, P1) -> 17
  178. PCI->APIC IRQ transform: (D0, B1,S0,F0, P0) -> 16
  179. PCI->APIC IRQ transform: (D0, B2,S3,F0, P0) -> 19
  180. pci 0000:03:00.0: BAR 6: assigned [mem 0x92000000-0x9201ffff pref]
  181. pci 0000:00:00.0: PCI bridge to [bus 03-03]
  182. pci 0000:00:00.0: bridge window [io 0x2000-0x2fff]
  183. pci 0000:00:00.0: bridge window [mem 0x85000000-0x85ffffff]
  184. pci 0000:00:00.0: bridge window [mem 0x92000000-0xb0ffffff pref]
  185. pci 0000:02:03.0: BAR 6: assigned [mem 0x90000000-0x9000ffff pref]
  186. pci 0000:01:00.0: PCI bridge to [bus 02-02]
  187. pci 0000:01:00.0: bridge window [io disabled]
  188. pci 0000:01:00.0: bridge window [mem 0x81000000-0x82ffffff]
  189. pci 0000:01:00.0: bridge window [mem 0x90000000-0x90ffffff 64bit pref]
  190. pci 0000:00:01.0: PCI bridge to [bus 01-02]
  191. pci 0000:00:01.0: bridge window [io 0x1000-0x1fff]
  192. pci 0000:00:01.0: bridge window [mem 0x80000000-0x83ffffff]
  193. pci 0000:00:01.0: bridge window [mem 0x90000000-0x91ffffff 64bit pref]
  194. PCI: Setting latency timer of device 0000:00:00.0 to 64
  195. PCI: Setting latency timer of device 0000:00:01.0 to 64
  196. PCI: Setting latency timer of device 0000:01:00.0 to 64
  197. pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
  198. pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff]
  199. pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
  200. pci_bus 0000:03: resource 1 [mem 0x85000000-0x85ffffff]
  201. pci_bus 0000:03: resource 2 [mem 0x92000000-0xb0ffffff pref]
  202. pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
  203. pci_bus 0000:01: resource 1 [mem 0x80000000-0x83ffffff]
  204. pci_bus 0000:01: resource 2 [mem 0x90000000-0x91ffffff 64bit pref]
  205. pci_bus 0000:02: resource 1 [mem 0x81000000-0x82ffffff]
  206. pci_bus 0000:02: resource 2 [mem 0x90000000-0x90ffffff 64bit pref]
  207. Switching to clocksource lt
  208. pnp: PnP ACPI: disabled
  209. NET: Registered protocol family 2
  210. IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
  211. TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
  212. TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
  213. TCP: Hash tables configured (established 524288 bind 65536)
  214. TCP reno registered
  215. UDP hash table entries: 16384 (order: 7, 524288 bytes)
  216. UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
  217. NET: Registered protocol family 1
  218. RPC: Registered udp transport module.
  219. RPC: Registered tcp transport module.
  220. RPC: Registered tcp NFSv4.1 backchannel transport module.
  221. PCI: CLS 32 bytes
  222. pci 0000:01:04.1: EHCI: unrecognized capability 00
  223. platform rtc: registered platform RTC device (no PNP device found)
  224. RESTART daemon started
  225. pci 0000:01:02.3: allocated PCI BAR #1: base 0x83202000
  226. alloc irq_desc for 24 on node 0
  227. alloc kstat_irqs on node 0
  228. alloc irq_desc for 25 on node 0
  229. alloc kstat_irqs on node 0
  230. alloc irq_desc for 26 on node 0
  231. alloc kstat_irqs on node 0
  232. alloc irq_desc for 27 on node 0
  233. alloc kstat_irqs on node 0
  234. alloc irq_desc for 28 on node 0
  235. alloc kstat_irqs on node 0
  236. alloc irq_desc for 29 on node 0
  237. alloc kstat_irqs on node 0
  238. alloc irq_desc for 30 on node 0
  239. alloc kstat_irqs on node 0
  240. alloc irq_desc for 31 on node 0
  241. alloc kstat_irqs on node 0
  242. alloc irq_desc for 32 on node 0
  243. alloc kstat_irqs on node 0
  244. alloc irq_desc for 33 on node 0
  245. alloc kstat_irqs on node 0
  246. alloc irq_desc for 34 on node 0
  247. alloc kstat_irqs on node 0
  248. alloc irq_desc for 35 on node 0
  249. alloc kstat_irqs on node 0
  250. alloc irq_desc for 36 on node 0
  251. alloc kstat_irqs on node 0
  252. alloc irq_desc for 37 on node 0
  253. alloc kstat_irqs on node 0
  254. alloc irq_desc for 38 on node 0
  255. alloc kstat_irqs on node 0
  256. alloc irq_desc for 39 on node 0
  257. alloc kstat_irqs on node 0
  258. pci 0000:01:02.3: mcst-gpio: MCST-GPIO support successfully loaded.
  259. i2c_spi 0000:01:02.1: probed
  260. l_i2c l_i2c.0: i2c_cbase = 0000e40000024014, i2c_dbase = 0000e40000028040
  261. l_i2c l_i2c.0: I2C adapter 0 registered
  262. l_i2c l_i2c.0: I2C adapter 1 registered
  263. l_i2c l_i2c.0: I2C adapter 2 registered
  264. l_i2c l_i2c.0: I2C adapter 3 registered
  265. l_spi l_spi.0: probed
  266. audit: initializing netlink socket (disabled)
  267. type=2000 audit(1.150:1): initialized
  268. HugeTLB registered 2 MB page size, pre-allocated 0 pages
  269. VFS: Disk quotas dquot_6.5.2
  270. Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  271. Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  272. msgmni has been set to 32768
  273. alg: No test for stdrng (krng)
  274. Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  275. io scheduler noop registered
  276. io scheduler deadline registered
  277. io scheduler cfq registered (default)
  278. LTT : ltt-relay init
  279. pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  280. lynxfb: no options.
  281. lynxfb: share->revid = a0
  282. lynxfb: enable 2d acceleration
  283. lynxfb: no specific g_option.
  284. lynxfb: video memory size = 16 mb
  285. lynxfb: video memory vaddr = 0000e40004280000
  286. lynxfb: sm718 mmio address = 0000e40004000000
  287. lynxfb: framebuffer #0 alloc okay
  288. lynxfb: use simul primary mode
  289. lynxfb: crtc->cursor.mmio = 0000e400040800f0
  290. lynxfb: ret = 5, fb_find_mode failed, with driver prepared modes
  291. lynxfb: success! use specified mode:800x600-8@60 in kernel prepared default modedb
  292. lynxfb: Member of info->var is :
  293. xres=800
  294. yres=600
  295. xres_virtual=800
  296. yres_virtual=600
  297. xoffset=0
  298. yoffset=0
  299. bits_per_pixel=8
  300. ...
  301. lynxfb: fix->smem_start = 81000000
  302. lynxfb: fix->smem_len = 1000000
  303. lynxfb: fix->mmio_start = 82000000
  304. lynxfb: fix->mmio_len = 200000
  305. lynxfb: Ready to register framebuffer #0.
  306. lynxfb: primary channel
  307. Set Panel Plane enbit:after tried 1 times
  308. lynxfb: ddk setlogicdispout done
  309. Console: switching to colour frame buffer device 100x37
  310. lynxfb: Accomplished register framebuffer #0.
  311. NOHZ: local_softirq_pending 40
  312. [drm] Initialized drm 1.1.0 20060810
  313. [drm] radeon kernel modesetting enabled.
  314. [drm] initializing kernel modesetting (CAICOS 0x1002:0x6779 0x1458:0x22A3).
  315. [drm] register mmio base: 0x85000000
  316. [drm] register mmio size: 131072
  317. ATOM BIOS: GV
  318. radeon 0000:03:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
  319. radeon 0000:03:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
  320. [drm] Detected VRAM RAM=1024M, BAR=256M
  321. [drm] RAM width 64bits DDR
  322. [TTM] Zone kernel: Available graphics memory: 12290914 kiB
  323. [TTM] Zone dma32: Available graphics memory: 2097152 kiB
  324. [TTM] Initializing pool allocator
  325. [TTM] Initializing DMA pool allocator
  326. [drm] radeon: 1024M of VRAM memory ready
  327. [drm] radeon: 512M of GTT memory ready.
  328. platform radeon_uvd.0: firmware: using built-in firmware radeon/SUMO_uvd.bin
  329. [drm] GART: num cpu pages 131072, num gpu pages 131072
  330. [drm] probing gen 2 caps for device e3e3:abcd = 323c81/0
  331. [drm] Loading CAICOS Microcode
  332. platform radeon_cp.0: firmware: using built-in firmware radeon/CAICOS_pfp.bin
  333. platform radeon_cp.0: firmware: using built-in firmware radeon/CAICOS_me.bin
  334. platform radeon_cp.0: firmware: using built-in firmware radeon/BTC_rlc.bin
  335. platform radeon_cp.0: firmware: using built-in firmware radeon/CAICOS_mc.bin
  336. [drm] PCIE GART of 512M enabled (table at 0x0000000000273000).
  337. radeon 0000:03:00.0: WB enabled
  338. radeon 0000:03:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x0000d015e5a7dc00
  339. radeon 0000:03:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x0000d015e5a7dc0c
  340. [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
  341. [drm] Driver supports precise vblank timestamp query.
  342. alloc irq_desc for 40 on node 0
  343. alloc kstat_irqs on node 0
  344. radeon 0000:03:00.0: irq 40 for MSI/MSI-X
  345. radeon 0000:03:00.0: radeon: using MSI.
  346. [drm] radeon: irq initialized.
  347. PCI: Setting latency timer of device 0000:03:00.0 to 64
  348. [drm] ring test on 0 succeeded in 1 usecs
  349. [drm] ring test on 3 succeeded in 0 usecs
  350. [drm] ib test on ring 0 succeeded in 0 usecs
  351. [drm] ib test on ring 3 succeeded in 0 usecs
  352. [drm] Radeon Display Connectors
  353. [drm] Connector 0:
  354. [drm] HDMI-A-1
  355. [drm] HPD2
  356. [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
  357. [drm] Encoders:
  358. [drm] DFP1: INTERNAL_UNIPHY1
  359. [drm] Connector 1:
  360. [drm] DVI-D-1
  361. [drm] HPD4
  362. [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
  363. [drm] Encoders:
  364. [drm] DFP2: INTERNAL_UNIPHY
  365. [drm] Connector 2:
  366. [drm] VGA-1
  367. [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
  368. [drm] Encoders:
  369. [drm] CRT1: INTERNAL_KLDSCP_DAC1
  370. [drm] Internal thermal controller with fan control
  371. NOHZ: local_softirq_pending 100
  372. [drm] radeon: power management initialized
  373. [drm] fb mappable at 0xA0375000
  374. [drm] vram apper at 0xA0000000
  375. [drm] size 3145728
  376. [drm] fb depth is 24
  377. [drm] pitch is 4096
  378. radeon 0000:03:00.0: fb1: radeondrmfb frame buffer device
  379. radeon 0000:03:00.0: registered panic notifier
  380. [drm] Initialized radeon 2.33.0 20080528 for 0000:03:00.0 on minor 0
  381. Serial 8250/16550: console probe ... is not detected
  382. Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  383. Serial: 85c30 driver $ 2 ports, IRQ sharing enabled
  384. 0000:01:02.2: ttyS0 at MMIO 0x83200040 (irq = 3) is a Z85c30 ESCC - Serial port
  385. 0000:01:02.2: ttyS1 at MMIO 0x83200042 (irq = 3) is a Z85c30 ESCC - Serial port
  386. serial_zilog_probe: register IRQ #3 and set interrupt handler.
  387. brd: module loaded
  388. Uniform Multi-Platform E-IDE driver
  389. ELBRUS 0000:01:02.0: IDE controller (0x8086:0x4d49 rev 0x80)
  390. 0000:01:02.0: Unmask interrupts
  391. ELBRUS 0000:01:02.0: 100% native mode on irq 11
  392. ide0: BM-DMA at 0x1020-0x1027
  393. ide1: BM-DMA at 0x1028-0x102f
  394. Probing IDE interface ide0...
  395. Probing IDE interface ide1...
  396. hdc: ULTIMATE CF CARD, CFA DISK drive
  397. hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
  398. hdc: UDMA/100 mode selected
  399. ide0 at 0x1000-0x1007,0x100a on irq 11
  400. ide1 at 0x1010-0x1017,0x101a on irq 11
  401. ide-gd driver 1.18
  402. hdc: max request size: 512KiB
  403. hdc: 31227840 sectors (15988 MB) w/1KiB Cache, CHS=1943/255/63
  404. hdc: cache flushes supported
  405. hdc: hdc1
  406. ide-cd driver 5.00
  407. ahci 0000:01:03.0: version 3.0
  408. ahci 0000:01:03.0: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0xf impl SATA mode
  409. ahci 0000:01:03.0: flags: ncq sntf pm led clo only pmp pio slum part ccc apst
  410. scsi0 : ahci
  411. scsi1 : ahci
  412. scsi2 : ahci
  413. scsi3 : ahci
  414. ata1: SATA max UDMA/133 irq_stat 0x00400000, PHY RDY changed irq 21
  415. ata2: SATA max UDMA/133 irq_stat 0x00400000, PHY RDY changed irq 21
  416. ata3: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 21
  417. ata4: SATA max UDMA/133 abar m8192@0x83204000 port 0x83204280 irq 21
  418. l_e1000.c:v1.00 08.07.2008 alexmipt@mcst.ru
  419. PCI: Setting latency timer of device 0000:01:01.0 to 64
  420. assigned IRQ 10.
  421. eth0: registered as L-E1000
  422. eth0 : L-E1000 (rev. 1) 0000:01:01.0
  423. e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
  424. e100: Copyright(c) 1999-2006 Intel Corporation
  425. PCC: drv_mode=DMA
  426. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  427. ehci_hcd 0000:01:04.1: EHCI Host Controller
  428. ehci_hcd 0000:01:04.1: new USB bus registered, assigned bus number 1
  429. ehci_hcd 0000:01:04.1: cache line size of 32 is not supported
  430. ehci_hcd 0000:01:04.1: irq 20, io mem 0x83207000
  431. ehci_hcd 0000:01:04.1: USB 2.0 started, EHCI 1.00
  432. usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  433. usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  434. usb usb1: Product: EHCI Host Controller
  435. usb usb1: Manufacturer: Linux 2.6.33-elbrus.033.6.57 ehci_hcd
  436. usb usb1: SerialNumber: 0000:01:04.1
  437. hub 1-0:1.0: USB hub found
  438. hub 1-0:1.0: 2 ports detected
  439. ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  440. ohci_hcd 0000:01:04.0: OHCI Host Controller
  441. ohci_hcd 0000:01:04.0: new USB bus registered, assigned bus number 2
  442. ohci_hcd 0000:01:04.0: irq 20, io mem 0x83206000
  443. ata4: SATA link down (SStatus 0 SControl 300)
  444. usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  445. usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  446. usb usb2: Product: OHCI Host Controller
  447. usb usb2: Manufacturer: Linux 2.6.33-elbrus.033.6.57 ohci_hcd
  448. usb usb2: SerialNumber: 0000:01:04.0
  449. hub 2-0:1.0: USB hub found
  450. hub 2-0:1.0: 2 ports detected
  451. uhci_hcd: USB Universal Host Controller Interface driver
  452. Initializing USB Mass Storage driver...
  453. usbcore: registered new interface driver usb-storage
  454. USB Mass Storage support registered.
  455. usbcore: registered new interface driver libusual
  456. i8042.c: No controller found.
  457. mice: PS/2 mouse device common for all mice
  458. usbcore: registered new interface driver usbtouchscreen
  459. rtc-cy14b101p spi0.1: rtc core: registered cy14b101p as rtc0
  460. RTC is used for SCLKR. Alarm functionality is disabled
  461. wd: set I2C-SPI watchdog timer
  462. usb 1-1: new high speed USB device using ehci_hcd and address 2
  463. cpuidle: using governor ladder
  464. cpuidle: using governor menu
  465. cpuidle: using governor rt
  466. sdhci: Secure Digital Host Controller Interface driver
  467. sdhci: Copyright(c) Pierre Ossman
  468. usbcore: registered new interface driver hiddev
  469. usbcore: registered new interface driver usbhid
  470. usbhid: USB HID core driver
  471. dmp_assist driver installed. Major:0xf2(242)
  472. TCP cubic registered
  473. NET: Registered protocol family 17
  474. Measuring thread context switch cost...
  475. 12500 iterations in 20000000 nanoseconds
  476. Thread context switch cost is 3660 cycles (CPU at 800000 kHz).
  477. rtc-cy14b101p spi0.1: setting system clock to 2015-12-03 14:29:20 UTC (1449152960)
  478. usb 1-1: New USB device found, idVendor=04b4, idProduct=6560
  479. usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  480. hub 1-1:1.0: USB hub found
  481. hub 1-1:1.0: 4 ports detected
  482. usb 1-2: new high speed USB device using ehci_hcd and address 3
  483. ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  484. ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  485. ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  486. ata2.00: ATA-9: WDC WD1003FZEX-00MK2A0, 01.01A01, max UDMA/133
  487. ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
  488. ata3.00: ATAPI: ATAPI iHAS124 F, CL05, max UDMA/133
  489. ata1.00: ATA-8: KINGSTON SMS200S3120G, 603ABBF0, max UDMA/133
  490. ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
  491. ata2.00: configured for UDMA/133
  492. ata3.00: configured for UDMA/133
  493. ata1.00: configured for UDMA/133
  494. NOHZ: local_softirq_pending 10
  495. NOHZ: local_softirq_pending 10
  496. scsi 0:0:0:0: Direct-Access ATA KINGSTON SMS200S 603A PQ: 0 ANSI: 5
  497. usb 1-2: New USB device found, idVendor=04b4, idProduct=6560
  498. usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  499. NOHZ: local_softirq_pending 10
  500. hub 1-2:1.0: USB hub found
  501. NOHZ: local_softirq_pending 10
  502. sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
  503. NOHZ: local_softirq_pending 10
  504. NOHZ: local_softirq_pending 10
  505. NOHZ: local_softirq_pending 10
  506. hub 1-2:1.0: 4 ports detected
  507. NOHZ: local_softirq_pending 10
  508. scsi 1:0:0:0: Direct-Access ATA WDC WD1003FZEX-0 01.0 PQ: 0 ANSI: 5
  509. sd 0:0:0:0: [sda] Write Protect is off
  510. sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  511. sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  512. scsi 2:0:0:0: CD-ROM ATAPI iHAS124 F CL05 PQ: 0 ANSI: 5
  513. sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
  514. sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
  515. Uniform CD-ROM driver Revision: 3.20
  516. sd 1:0:0:0: [sdb] 4096-byte physical blocks
  517. sr 2:0:0:0: Attached scsi CD-ROM sr0
  518. usb 1-1.2: new low speed USB device using ehci_hcd and address 4
  519. sd 1:0:0:0: [sdb] Write Protect is off
  520. sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
  521. sda:
  522. sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  523. sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
  524. sdb:
  525. usb 1-1.2: New USB device found, idVendor=046d, idProduct=c31c
  526. unknown partition table
  527. sd 0:0:0:0: [sda] Attached SCSI disk
  528. usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  529. usb 1-1.2: Product: USB Keyboard
  530. usb 1-1.2: Manufacturer: Logitech
  531. input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:01.0/0000:01:04.1/usb1/1-1/1-1.2/1-1.2:1.0/input/input0
  532. generic-usb 0003:046D:C31C.0001: input: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:01:04.1-1.2/input0
  533. sd 1:0:0:0: [sdb] Attached SCSI disk
  534. md: Waiting for all devices to be available before autodetect
  535. md: If you don't use raid, use raid=noautodetect
  536. input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:01.0/0000:01:04.1/usb1/1-1/1-1.2/1-1.2:1.1/input/input1
  537. generic-usb 0003:046D:C31C.0002: input: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:01:04.1-1.2/input1
  538. md: Autodetecting RAID arrays.
  539. md: Scanned 0 and added 0 devices.
  540. md: autorun ...
  541. md: ... autorun DONE.
  542. EXT4-fs (sda3): mounted filesystem with ordered data mode
  543. VFS: Mounted root (ext2 filesystem) readonly on device 8:3.
  544. Freeing unused kernel init text: from 0xd0000287d000 to 0xd000029cc1c8 1340k freed
  545. Freeing unused kernel init data: from 0xd00002c4b000 to 0xd00002c62000 92k freed
  546. CFS CPU scheduler.
  547. usb 1-1.1: new low speed USB device using ehci_hcd and address 5
  548. usb 1-1.1: New USB device found, idVendor=062a, idProduct=0000
  549. usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  550. input: HID 062a:0000 as /devices/pci0000:00/0000:00:01.0/0000:01:04.1/usb1/1-1/1-1.1/1-1.1:1.0/input/input2
  551. generic-usb 0003:062A:0000.0003: input: USB HID v1.10 Mouse [HID 062a:0000] on usb-0000:01:04.1-1.1/input0
  552. Adding 4194296k swap on /dev/sda2. Priority:42 extents:1 across:4194296k SSD
  553. EXT4-fs (sda1): mounted filesystem with ordered data mode
  554. EXT4-fs (sda5): mounted filesystem with ordered data mode
  555. EXT4-fs (sda6): mounted filesystem with ordered data mode
  556. EXT4-fs (sda7): mounted filesystem with ordered data mode
  557. lp: driver loaded but no devices found
  558. PCI parallel port detected: 416c:0100, I/O at 0x1040(0x1048), IRQ 3
  559. parport0: PC-style at 0x1040 (0x1048) [PCSPP]
  560. lp0: using parport0 (interrupt-driven).
  561. loop: module loaded
  562. i2c /dev entries driver
  563. input: ltc2954 as /devices/platform/ltc2954/input/input3
  564. eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
  565. NET: Registered protocol family 10
  566. vgaarb: device changed decodes: PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:owns=none
  567. eth0: no IPv6 routers present
RAW Paste Data