HELLO! BOOT0 is starting!
boot0 version : 3.1.0
dram size =512
card boot number = 2
card no is 2
sdcard 2 line count 0
[mmc]: mmc driver ver 2014-04-3 16:20
[mmc]: ***Try SD card 2***
[mmc]: mmc 2 cmd 8 timeout, err 0x00000100
[mmc]: mmc 2 cmd 8 err 0x00000100
[mmc]: mmc 2 send if cond failed
[mmc]: mmc 2 cmd 55 timeout, err 0x00000100
[mmc]: mmc 2 cmd 55 err 0x00000100
[mmc]: mmc 2 send app cmd failed
[mmc]: ***Try MMC card 2***
[mmc]: MMC ver 4.5
[mmc]: SD/MMC Card: 4bit, capacity: 3776MB
[mmc]: vendor: Man 0x00450100 Snr 0x3a44c129
[mmc]: product: SEM04
[mmc]: revision: 4.7
[mmc]: ***SD/MMC 2 init OK!!!***
sdcard 2 init ok
The size of uboot is 0x000ac000.
sum=0x1b9516ce
src_sum=0x1b9516ce
Succeed in loading uboot from sdmmc flash.
Ready to disable icache.
Jump to secend Boot.
[      0.306]

U-Boot 2011.09-rc1-svn (Feb 19 2015 - 19:43:52) Allwinner Technology

[      0.314]version: 1.1.0
[      0.317]pmbus:   ready
[      0.422]PMU: AXP209
[      0.424]PMU: AXP20x found
[      0.427]PMU: bat ratio = 100
[      0.435]PMU: dcdc2 1450
[      0.446]PMU: pll1 912 Mhz
boot_clock = 912
dcdc2_vol = 1450
dcdc3_vol = 1300
ldo2_vol = 3000
ldo3_vol = 2800
ldo4_vol = 2800
power_start = 0
storage_type = 0
usb_recovery = 0
find power_sply to end
fel key old mode
run key detect
no key found
no key input
dram_para_set start
dram_para_set end
[      0.486]DRAM:  512 MiB
relocation Offset is: 15b17000
user_gpio config
user_gpio ok
[ir_boot_para]:the ir is no use
workmode = 0
MMC:	 2
[      0.631][mmc]: mmc driver ver 2014-5-23 10:07:00
[      0.636][mmc]: get sdc_odly_25M fail,use default dly 0
[      0.641][mmc]: get sdc_sdly_25M fail,use default dly 5
[      0.647][mmc]: get sdc_odly_50M fail,use default dly 3
[      0.652][mmc]: get sdc_sdly_50M fail,use default dly 5
[      0.657][mmc]: get sdc_f_max fail,use default sdc_f_max 52000000
[      0.663][mmc]: SUNXI SD/MMC: 2
[      0.676][mmc]: ************Try SD card 2************
[      0.681][mmc]: mmc 2 cmd 8 timeout, err 100
[      0.688][mmc]: mmc 2 mmc cmd 8 err 0x00000100
[      0.692][mmc]: mmc send if cond failed
[      0.696][mmc]: mmc 2 cmd 55 timeout, err 100
[      0.702][mmc]: mmc 2 mmc cmd 55 err 0x00000100
[      0.706][mmc]: send app cmd failed
[      0.709][mmc]: ************Try MMC card 2************
[      0.754][mmc]: MID 000045 PSN 44c12930
[      0.757][mmc]: PNM SEM04G -- 0x53-45-4d-30-34-47
[      0.762][mmc]: PRV 3.10
[      0.765][mmc]: MDT m-10 y-2017
[      0.768][mmc]: MMC ver 4.5
[      0.771][mmc]: ---------------mmc->clock 52000000-----------
[      0.776][mmc]: ---------------mmc->bus_width 4--------------
[      0.782][mmc]: SD/MMC Card: 4bit, capacity: 3776MB
[      0.787][mmc]: boot0 capacity: 2000KB,boot1 capacity: 2000KB
[      0.793][mmc]: ************SD/MMC 2 init OK!!!************
[      0.799]sunxi flash init ok
DRV_DISP_Init: opened
[      0.902]fetch script data boot_disp.output_type fail
[      0.907]fetch script data boot_disp.output_mode fail
[      0.913]fetch script data boot_disp.auto_hpd fail
[      0.917]lcd0_para.lcd_used=0
error: open config.fex, maybe it is not exist
Hdmi_dvi_enable is NULL
Hdmi_get_input_csc is NULL
In:    serial
Out:   serial
Err:   serial
--------fastboot partitions--------
-total partitions:5-
-name-        -start-       -size-
bootloader  : 1000000       2000000
env         : 3000000       1000000
boot        : 4000000       1000000
rootfs      : 5000000       20000000
UDISK       : 25000000      0
-----------------------------------
base bootcmd=run setargs_mmc boot_normal
bootcmd set setargs_mmc
key 0
recovery key high 6, low 4
cant find fstbt value
no misc partition is found
to be run cmd=run setargs_mmc boot_normal
the part isn't exist
WORK_MODE_BOOT
sunxi_bmp_display
f_read btr over hd12871
read byte = 4208056
[      1.229]fetch script data boot_disp.virtual_logo_width fail or vale=0
CONFIG_ARCH_SUN7IW1P1 : coef_rdy_en!!!
[      1.239]Hit any key to stop autoboot:  0
read boot or recovery all
[      1.957]sunxi flash read :offset 4000000, 16246686 bytes OK
[      1.976]ready to boot
[      1.978][mmc]: mmc exit start
[      1.996][mmc]: mmc 2 cmd 8 timeout, err 100
[      2.003][mmc]: mmc 2 mmc cmd 8 err 0x00000100
[      2.007][mmc]: mmc send if cond failed
[      2.011][mmc]: mmc 2 cmd 55 timeout, err 100
[      2.017][mmc]: mmc 2 mmc cmd 55 err 0x00000100
[      2.021][mmc]: send app cmd failed
[      2.032][mmc]: mmc 2 exit ok
[      2.035]
Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.4.106+ (jenkins@jenkins.umix.io) (gcc version 4.6.3 20120201 (prerelease) (crosstool-NG linaro-1.13.1-2012.02-20120222 - Linaro GCC 2012.02) ) #97 SMP Thu Jan 18 21:57:45 CET 2018
[    0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: sun7i
[    0.000000] [sun7i_fixup]: From boot, get meminfo:
[    0.000000] 	Start:	0x40000000
[    0.000000] 	Size:	512MB