Advertisement
Guest User

Untitled

a guest
May 15th, 2012
77
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 8.75 KB | None
  1. smartctl 5.41 2011-06-09 r3365 [i686-linux-3.2.0-24-generic] (local build)
  2. Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family: Western Digital Scorpio Blue Serial ATA
  6. Device Model: WDC WD3200BEVT-00ZAT0
  7. Serial Number: WD-WXG0AA912456
  8. LU WWN Device Id: 5 0014ee 203c7334f
  9. Firmware Version: 01.01A01
  10. User Capacity: 320 072 933 376 bytes [320 GB]
  11. Sector Size: 512 bytes logical/physical
  12. Device is: In smartctl database [for details use: -P show]
  13. ATA Version is: 8
  14. ATA Standard is: Exact ATA specification draft version not indicated
  15. Local Time is: Tue May 15 22:36:10 2012 MSK
  16. SMART support is: Available - device has SMART capability.
  17. SMART support is: Enabled
  18.  
  19. === START OF READ SMART DATA SECTION ===
  20. SMART overall-health self-assessment test result: PASSED
  21.  
  22. General SMART Values:
  23. Offline data collection status: (0x00) Offline data collection activity
  24. was never started.
  25. Auto Offline Data Collection: Disabled.
  26. Self-test execution status: ( 0) The previous self-test routine completed
  27. without error or no self-test has ever
  28. been run.
  29. Total time to complete Offline
  30. data collection: ( 9600) seconds.
  31. Offline data collection
  32. capabilities: (0x7b) SMART execute Offline immediate.
  33. Auto Offline data collection on/off support.
  34. Suspend Offline collection upon new
  35. command.
  36. Offline surface scan supported.
  37. Self-test supported.
  38. Conveyance Self-test supported.
  39. Selective Self-test supported.
  40. SMART capabilities: (0x0003) Saves SMART data before entering
  41. power-saving mode.
  42. Supports SMART auto save timer.
  43. Error logging capability: (0x01) Error logging supported.
  44. General Purpose Logging supported.
  45. Short self-test routine
  46. recommended polling time: ( 2) minutes.
  47. Extended self-test routine
  48. recommended polling time: ( 113) minutes.
  49. Conveyance self-test routine
  50. recommended polling time: ( 5) minutes.
  51. SCT capabilities: (0x303f) SCT Status supported.
  52. SCT Error Recovery Control supported.
  53. SCT Feature Control supported.
  54. SCT Data Table supported.
  55.  
  56. SMART Attributes Data Structure revision number: 16
  57. Vendor Specific SMART Attributes with Thresholds:
  58. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  59. 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 856
  60. 3 Spin_Up_Time 0x0027 156 146 021 Pre-fail Always - 3175
  61. 4 Start_Stop_Count 0x0032 094 094 000 Old_age Always - 6359
  62. 5 Reallocated_Sector_Ct 0x0033 199 199 140 Pre-fail Always - 3
  63. 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 2
  64. 9 Power_On_Hours 0x0032 095 095 000 Old_age Always - 4359
  65. 10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0
  66. 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
  67. 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1636
  68. 192 Power-Off_Retract_Count 0x0032 199 199 000 Old_age Always - 788
  69. 193 Load_Cycle_Count 0x0032 186 186 000 Old_age Always - 44447
  70. 194 Temperature_Celsius 0x0022 111 102 000 Old_age Always - 36
  71. 196 Reallocated_Event_Count 0x0032 197 197 000 Old_age Always - 3
  72. 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 31
  73. 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
  74. 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
  75. 200 Multi_Zone_Error_Rate 0x0009 100 253 051 Pre-fail Offline - 0
  76.  
  77. SMART Error Log Version: 1
  78. Warning: ATA error count 33877 inconsistent with error log pointer 1
  79.  
  80. ATA Error Count: 33877 (device log contains only the most recent five errors)
  81. CR = Command Register [HEX]
  82. FR = Features Register [HEX]
  83. SC = Sector Count Register [HEX]
  84. SN = Sector Number Register [HEX]
  85. CL = Cylinder Low Register [HEX]
  86. CH = Cylinder High Register [HEX]
  87. DH = Device/Head Register [HEX]
  88. DC = Device Command Register [HEX]
  89. ER = Error register [HEX]
  90. ST = Status register [HEX]
  91. Powered_Up_Time is measured from power on, and printed as
  92. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  93. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  94.  
  95. Error 33877 occurred at disk power-on lifetime: 4359 hours (181 days + 15 hours)
  96. When the command that caused the error occurred, the device was active or idle.
  97.  
  98. After command completion occurred, registers were:
  99. ER ST SC SN CL CH DH
  100. -- -- -- -- -- -- --
  101. 04 51 08 00 00 00 e0 Error: ABRT 8 sectors at LBA = 0x00000000 = 0
  102.  
  103. Commands leading to the command that caused the error were:
  104. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  105. -- -- -- -- -- -- -- -- ---------------- --------------------
  106. c8 00 08 00 00 00 00 00 00:30:08.310 READ DMA
  107. ec 00 00 00 00 00 00 00 00:30:08.301 IDENTIFY DEVICE
  108. ef 03 46 00 00 00 00 00 00:30:08.294 SET FEATURES [Set transfer mode]
  109.  
  110. Error 33876 occurred at disk power-on lifetime: 4359 hours (181 days + 15 hours)
  111. When the command that caused the error occurred, the device was active or idle.
  112.  
  113. After command completion occurred, registers were:
  114. ER ST SC SN CL CH DH
  115. -- -- -- -- -- -- --
  116. 04 51 08 00 00 00 e0 Error: ABRT 8 sectors at LBA = 0x00000000 = 0
  117.  
  118. Commands leading to the command that caused the error were:
  119. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  120. -- -- -- -- -- -- -- -- ---------------- --------------------
  121. c8 00 08 00 00 00 00 00 00:30:08.286 READ DMA
  122. ec 00 00 00 00 00 00 00 00:30:08.277 IDENTIFY DEVICE
  123. ef 03 46 00 00 00 00 00 00:30:08.270 SET FEATURES [Set transfer mode]
  124.  
  125. Error 33875 occurred at disk power-on lifetime: 4359 hours (181 days + 15 hours)
  126. When the command that caused the error occurred, the device was active or idle.
  127.  
  128. After command completion occurred, registers were:
  129. ER ST SC SN CL CH DH
  130. -- -- -- -- -- -- --
  131. 04 51 08 00 00 00 e0 Error: ABRT 8 sectors at LBA = 0x00000000 = 0
  132.  
  133. Commands leading to the command that caused the error were:
  134. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  135. -- -- -- -- -- -- -- -- ---------------- --------------------
  136. c8 00 08 00 00 00 00 00 00:30:08.262 READ DMA
  137. ec 00 00 00 00 00 00 00 00:30:08.253 IDENTIFY DEVICE
  138. ef 03 46 00 00 00 00 00 00:30:08.246 SET FEATURES [Set transfer mode]
  139.  
  140. Error 33874 occurred at disk power-on lifetime: 4359 hours (181 days + 15 hours)
  141. When the command that caused the error occurred, the device was active or idle.
  142.  
  143. After command completion occurred, registers were:
  144. ER ST SC SN CL CH DH
  145. -- -- -- -- -- -- --
  146. 04 51 08 00 00 00 e0 Error: ABRT 8 sectors at LBA = 0x00000000 = 0
  147.  
  148. Commands leading to the command that caused the error were:
  149. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  150. -- -- -- -- -- -- -- -- ---------------- --------------------
  151. c8 00 08 00 00 00 00 00 00:30:08.238 READ DMA
  152. ec 00 00 00 00 00 00 00 00:30:08.229 IDENTIFY DEVICE
  153. ef 03 46 00 00 00 00 00 00:30:08.222 SET FEATURES [Set transfer mode]
  154.  
  155. Error 33873 occurred at disk power-on lifetime: 4359 hours (181 days + 15 hours)
  156. When the command that caused the error occurred, the device was active or idle.
  157.  
  158. After command completion occurred, registers were:
  159. ER ST SC SN CL CH DH
  160. -- -- -- -- -- -- --
  161. 04 51 08 00 00 00 e0 Error: ABRT 8 sectors at LBA = 0x00000000 = 0
  162.  
  163. Commands leading to the command that caused the error were:
  164. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  165. -- -- -- -- -- -- -- -- ---------------- --------------------
  166. c8 00 08 00 00 00 00 00 00:30:08.214 READ DMA
  167. ec 00 00 00 00 00 00 00 00:30:08.205 IDENTIFY DEVICE
  168. ef 03 46 00 00 00 00 00 00:30:08.198 SET FEATURES [Set transfer mode]
  169.  
  170. SMART Self-test log structure revision number 1
  171. No self-tests have been logged. [To run self-tests, use: smartctl -t]
  172.  
  173.  
  174. SMART Selective self-test log data structure revision number 1
  175. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  176. 1 0 0 Not_testing
  177. 2 0 0 Not_testing
  178. 3 0 0 Not_testing
  179. 4 0 0 Not_testing
  180. 5 0 0 Not_testing
  181. Selective self-test flags (0x0):
  182. After scanning selected spans, do NOT read-scan remainder of disk.
  183. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
RAW Paste Data Copied
Advertisement