smartctl 5.41 2011-06-09 r3365 [i686-linux-3.2.0-24-generic] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Western Digital Scorpio Blue Serial ATA Device Model: WDC WD3200BEVT-00ZAT0 Serial Number: WD-WXG0AA912456 LU WWN Device Id: 5 0014ee 203c7334f Firmware Version: 01.01A01 User Capacity: 320 072 933 376 bytes [320 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Tue May 15 22:36:10 2012 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 9600) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 113) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 856 3 Spin_Up_Time 0x0027 156 146 021 Pre-fail Always - 3175 4 Start_Stop_Count 0x0032 094 094 000 Old_age Always - 6359 5 Reallocated_Sector_Ct 0x0033 199 199 140 Pre-fail Always - 3 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 2 9 Power_On_Hours 0x0032 095 095 000 Old_age Always - 4359 10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1636 192 Power-Off_Retract_Count 0x0032 199 199 000 Old_age Always - 788 193 Load_Cycle_Count 0x0032 186 186 000 Old_age Always - 44447 194 Temperature_Celsius 0x0022 111 102 000 Old_age Always - 36 196 Reallocated_Event_Count 0x0032 197 197 000 Old_age Always - 3 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 31 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0009 100 253 051 Pre-fail Offline - 0 SMART Error Log Version: 1 Warning: ATA error count 33877 inconsistent with error log pointer 1 ATA Error Count: 33877 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 33877 occurred at disk power-on lifetime: 4359 hours (181 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 08 00 00 00 e0 Error: ABRT 8 sectors at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 00 00 00 00 00 00:30:08.310 READ DMA ec 00 00 00 00 00 00 00 00:30:08.301 IDENTIFY DEVICE ef 03 46 00 00 00 00 00 00:30:08.294 SET FEATURES [Set transfer mode] Error 33876 occurred at disk power-on lifetime: 4359 hours (181 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 08 00 00 00 e0 Error: ABRT 8 sectors at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 00 00 00 00 00 00:30:08.286 READ DMA ec 00 00 00 00 00 00 00 00:30:08.277 IDENTIFY DEVICE ef 03 46 00 00 00 00 00 00:30:08.270 SET FEATURES [Set transfer mode] Error 33875 occurred at disk power-on lifetime: 4359 hours (181 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 08 00 00 00 e0 Error: ABRT 8 sectors at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 00 00 00 00 00 00:30:08.262 READ DMA ec 00 00 00 00 00 00 00 00:30:08.253 IDENTIFY DEVICE ef 03 46 00 00 00 00 00 00:30:08.246 SET FEATURES [Set transfer mode] Error 33874 occurred at disk power-on lifetime: 4359 hours (181 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 08 00 00 00 e0 Error: ABRT 8 sectors at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 00 00 00 00 00 00:30:08.238 READ DMA ec 00 00 00 00 00 00 00 00:30:08.229 IDENTIFY DEVICE ef 03 46 00 00 00 00 00 00:30:08.222 SET FEATURES [Set transfer mode] Error 33873 occurred at disk power-on lifetime: 4359 hours (181 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 08 00 00 00 e0 Error: ABRT 8 sectors at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 00 00 00 00 00 00:30:08.214 READ DMA ec 00 00 00 00 00 00 00 00:30:08.205 IDENTIFY DEVICE ef 03 46 00 00 00 00 00 00:30:08.198 SET FEATURES [Set transfer mode] SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.