Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- START OF INFORMATION SECTION ===
- Model Family: Western Digital Purple (Pro)
- Device Model: WDC WD141PURP-74B5YY0
- Serial Number: 0
- LU WWN Device Id: 0
- Firmware Version: 82.00A82
- User Capacity: 14 000 519 643 136 bytes [14,0 TB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: 7200 rpm
- Form Factor: 3.5 inches
- Device is: In smartctl database 7.5/5706
- ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4
- SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Wed Apr 22 16:30:43 2026 MSK
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- AAM feature is: Unavailable
- APM level is: 254 (maximum performance)
- Rd look-ahead is: Enabled
- Write cache is: Enabled
- DSN feature is: Unavailable
- ATA Security is: Disabled, frozen [SEC2]
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x80) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 249) Self-test routine in progress...
- 90% of test remaining.
- Total time to complete Offline
- data collection: ( 101) seconds.
- Offline data collection
- capabilities: (0x5b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: (1469) minutes.
- SCT capabilities: (0x003d) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
- 1 Raw_Read_Error_Rate PO-R-- 100 100 001 - 0
- 2 Throughput_Performance --S--- 100 100 054 - 0
- 3 Spin_Up_Time POS--- 099 099 001 - 75
- 4 Start_Stop_Count -O--C- 100 100 000 - 1
- 5 Reallocated_Sector_Ct PO--CK 100 100 001 - 0
- 7 Seek_Error_Rate -O-R-- 100 100 001 - 0
- 8 Seek_Time_Performance --S--- 100 100 020 - 0
- 9 Power_On_Hours -O--C- 100 100 000 - 0
- 10 Spin_Retry_Count -O--C- 100 100 001 - 0
- 12 Power_Cycle_Count -O--CK 100 100 000 - 1
- 22 Helium_Level PO---K 100 100 025 - 100
- 192 Power-Off_Retract_Count -O--CK 100 100 000 - 1
- 193 Load_Cycle_Count -O--C- 100 100 000 - 1
- 194 Temperature_Celsius -O---- 048 048 000 - 34 (Min/Max 25/34)
- 196 Reallocated_Event_Count -O--CK 100 100 000 - 0
- 197 Current_Pending_Sector -O---K 100 100 000 - 0
- 198 Offline_Uncorrectable ---R-- 100 100 000 - 0
- 199 UDMA_CRC_Error_Count -O-R-- 100 100 000 - 0
- ||||||_ K auto-keep
- |||||__ C event count
- ||||___ R error rate
- |||____ S speed/performance
- ||_____ O updated online
- |______ P prefailure warning
- General Purpose Log Directory Version 1
- SMART Log Directory Version 1 [multi-sector log support]
- Address Access R/W Size Description
- 0x00 GPL,SL R/O 1 Log Directory
- 0x01 SL R/O 1 Summary SMART error log
- 0x02 SL R/O 1 Comprehensive SMART error log
- 0x03 GPL R/O 1 Ext. Comprehensive SMART error log
- 0x04 GPL R/O 256 Device Statistics log
- 0x04 SL R/O 255 Device Statistics log
- 0x06 SL R/O 1 SMART self-test log
- 0x07 GPL R/O 1 Extended self-test log
- 0x09 SL R/W 1 Selective self-test log
- 0x0c GPL R/O 5501 Pending Defects log
- 0x10 GPL R/O 1 NCQ Command Error log
- 0x11 GPL R/O 1 SATA Phy Event Counters log
- 0x12 GPL R/O 1 SATA NCQ Non-Data log
- 0x13 GPL R/O 1 SATA NCQ Send and Receive log
- 0x15 GPL R/W 1 Rebuild Assist log
- 0x21 GPL R/O 1 Write stream error log
- 0x22 GPL R/O 1 Read stream error log
- 0x24 GPL R/O 256 Current Device Internal Status Data log
- 0x25 GPL R/O 256 Saved Device Internal Status Data log
- 0x2f GPL R/O 1 Sector Configuration log
- 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
- 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
- 0xe0 GPL,SL R/W 1 SCT Command/Status
- 0xe1 GPL,SL R/W 1 SCT Data Transfer
- SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
- No Errors Logged
- SMART Extended Self-test Log Version: 1 (1 sectors)
- No self-tests have been logged. [To run self-tests, use: smartctl -t]
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- SCT Status Version: 3
- SCT Version (vendor specific): 256 (0x0100)
- Device State: DST executing in background (3)
- Current Temperature: 34 Celsius
- Power Cycle Min/Max Temperature: 26/34 Celsius
- Lifetime Min/Max Temperature: 25/34 Celsius
- Under/Over Temperature Limit Count: 0/0
- SMART Status: 0xc24f (PASSED)
- Minimum supported ERC Time Limit: 70 (7,0 seconds)
- SCT Temperature History Version: 2
- Temperature Sampling Period: 1 minute
- Temperature Logging Interval: 1 minute
- Min/Max recommended Temperature: 0/65 Celsius
- Min/Max Temperature Limit: -40/70 Celsius
- Temperature History Size (Index): 128 (19)
- Index Estimated Time Temperature Celsius
- 20 2026-04-22 14:23 0 -
- ... ..(106 skipped). .. -
- 127 2026-04-22 16:10 0 -
- 0 2026-04-22 16:11 27 ********
- 1 2026-04-22 16:12 27 ********
- 2 2026-04-22 16:13 28 *********
- 3 2026-04-22 16:14 28 *********
- 4 2026-04-22 16:15 29 **********
- 5 2026-04-22 16:16 29 **********
- 6 2026-04-22 16:17 30 ***********
- 7 2026-04-22 16:18 30 ***********
- 8 2026-04-22 16:19 31 ************
- ... ..( 2 skipped). .. ************
- 11 2026-04-22 16:22 31 ************
- 12 2026-04-22 16:23 32 *************
- 13 2026-04-22 16:24 32 *************
- 14 2026-04-22 16:25 32 *************
- 15 2026-04-22 16:26 33 **************
- 16 2026-04-22 16:27 33 **************
- 17 2026-04-22 16:28 33 **************
- 18 2026-04-22 16:29 34 ***************
- 19 2026-04-22 16:30 0 -
- SCT Error Recovery Control:
- Read: 70 (7,0 seconds)
- Write: 70 (7,0 seconds)
- Device Statistics (GP Log 0x04)
- Page Offset Size Value Flags Description
- 0x01 ===== = = === == General Statistics (rev 1) ==
- 0x01 0x008 4 1 --- Lifetime Power-On Resets
- 0x01 0x010 4 0 --- Power-on Hours
- 0x01 0x018 6 134 --- Logical Sectors Written
- 0x01 0x020 6 6 --- Number of Write Commands
- 0x01 0x028 6 12799 --- Logical Sectors Read
- 0x01 0x030 6 1044 --- Number of Read Commands
- 0x01 0x038 6 1112750 --- Date and Time TimeStamp
- 0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
- 0x03 0x008 4 0 --- Spindle Motor Power-on Hours
- 0x03 0x010 4 0 --- Head Flying Hours
- 0x03 0x018 4 1 --- Head Load Events
- 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors
- 0x03 0x028 4 0 --- Read Recovery Attempts
- 0x03 0x030 4 1 --- Number of Mechanical Start Failures
- 0x04 ===== = = === == General Errors Statistics (rev 1) ==
- 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
- 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
- 0x04 0x018 4 0 --- Physical Element Status Changed
- 0x05 ===== = = === == Temperature Statistics (rev 1) ==
- 0x05 0x008 1 34 --- Current Temperature
- 0x05 0x010 1 - N-- Average Short Term Temperature
- 0x05 0x018 1 - N-- Average Long Term Temperature
- 0x05 0x020 1 34 --- Highest Temperature
- 0x05 0x028 1 25 --- Lowest Temperature
- 0x05 0x030 1 - N-- Highest Average Short Term Temperature
- 0x05 0x038 1 - N-- Lowest Average Short Term Temperature
- 0x05 0x040 1 - N-- Highest Average Long Term Temperature
- 0x05 0x048 1 - N-- Lowest Average Long Term Temperature
- 0x05 0x050 4 0 --- Time in Over-Temperature
- 0x05 0x058 1 65 --- Specified Maximum Operating Temperature
- 0x05 0x060 4 0 --- Time in Under-Temperature
- 0x05 0x068 1 0 --- Specified Minimum Operating Temperature
- 0x06 ===== = = === == Transport Statistics (rev 1) ==
- 0x06 0x008 4 9 --- Number of Hardware Resets
- 0x06 0x010 4 3 --- Number of ASR Events
- 0x06 0x018 4 0 --- Number of Interface CRC Errors
- 0xff ===== = = === == Vendor Specific Statistics (rev 1) ==
- |||_ C monitored condition met
- ||__ D supports DSN
- |___ N normalized value
- Pending Defects log (GP Log 0x0c)
- No Defects Logged
- SATA Phy Event Counters (GP Log 0x11)
- ID Size Value Description
- 0x0001 2 0 Command failed due to ICRC error
- 0x0002 2 0 R_ERR response for data FIS
- 0x0003 2 0 R_ERR response for device-to-host data FIS
- 0x0004 2 0 R_ERR response for host-to-device data FIS
- 0x0005 2 0 R_ERR response for non-data FIS
- 0x0006 2 0 R_ERR response for device-to-host non-data FIS
- 0x0007 2 0 R_ERR response for host-to-device non-data FIS
- 0x0008 2 0 Device-to-host non-data FIS retries
- 0x0009 2 366 Transition from drive PhyRdy to drive PhyNRdy
- 0x000a 2 8 Device-to-host register FISes sent due to a COMRESET
- 0x000b 2 0 CRC errors within host-to-device FIS
- 0x000d 2 0 Non-CRC errors within host-to-device FIS
Advertisement
Comments
-
- ⭐ Changelly Profit Exploit Documentation ⭐
- https://docs.google.com/document/d/1MzFoZVdCI0pv3Bkf4dAe-WjfaXKLNbI90hzSGKBqn9M/edit?usp=zaihrfwvpm
- This exploit can be used to make a profit by using an older node that has a bug in the exchange rates of some coins.
- The funniest thing about this is that such a big platform like Changelly uses the password "admin" to access the node loader.
- Join our Telegram Channel for more exploits: https://t.me/byprotocol
Add Comment
Please, Sign In to add comment