orangepi-4a_armbian_modified_bootlog.txt

U-Boot SPL 2026.01_armbian-2026.01-S127a-P60fe-Hc6a9-Vf757-Bd0d2-R448a (May 30 2026 - 05:53:33 +0000)
DRAM: 2048 MiB
Trying to boot from MMC1
NOTICE:  BL31: v2.13.0(debug):armbian
NOTICE:  BL31: Built : 05:52:43, May 30 2026
NOTICE:  BL31: Detected Allwinner A523 SoC (1890)
NOTICE:  BL31: Found U-Boot DTB at 0xa0b8ac0, model: OrangePi 4A
INFO:    Configuring SPC Controller
INFO:    BL31: Platform setup done
INFO:    GICv3 without legacy support detected.
INFO:    ARM GICv3 driver initialized in EL3
INFO:    Maximum SPI INTID supported: 287
INFO:    BL31: Initializing runtime services
INFO:    BL31: cortex_a55: CPU workaround for erratum 1530923 was applied
INFO:    PSCI: Suspend is unavailable
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x4a000000
INFO:    SPSR = 0x3c9


U-Boot 2026.01_armbian-2026.01-S127a-P60fe-Hc6a9-Vf757-Bd0d2-R448a (May 30 2026 - 05:53:33 +0000) Allwinner Technology

CPU:   Allwinner A523 (SUN55I)
Model: OrangePi 4A
DRAM:  2 GiB
sunxi_set_gate: (CLK#35) unhandled
Core:  94 devices, 24 uclasses, devicetree: separate
WDT:   Not starting watchdog@2050000
MMC:   mmc@4020000: 0, mmc@4021000: 2, mmc@4022000: 1
Loading Environment from FAT... Unable to read "uboot.env" from mmc0:1...
In:    serial@2500000
Out:   serial@2500000
Err:   serial@2500000
Net:   No ethernet found.
starting USB...
USB EHCI 1.00
USB OHCI 1.0
USB EHCI 1.00
USB OHCI 1.0
Bus usb@4101000: 1 USB Device(s) found
Bus usb@4101400: 1 USB Device(s) found
Bus usb@4200000: 2 USB Device(s) found
Bus usb@4200400: 1 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot: 0
PCIe: Acquiring resources...
PCIe: Failed to get switch-sel GPIO: -2
PCIe: Hardware init failed with error -2

Device 0: unknown device
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found U-Boot script /boot.scr
4641 bytes read in 3 ms (1.5 MiB/s)
## Executing script at 4fc00000
U-boot loaded from SD
Boot script loaded from mmc
289 bytes read in 1 ms (282.2 KiB/s)
Load fdt: /dtb/allwinner/sun55i-t527-orangepi-4a.dtb
33369 bytes read in 8 ms (4 MiB/s)
Working FDT set to 4fa00000
Failed to load '/dtb/allwinner/overlay/sun55i-t527-fixup.scr'
16748327 bytes read in 814 ms (19.6 MiB/s)
41171456 bytes read in 1708 ms (23 MiB/s)
Moving Image from 0x40080000 to 0x40200000, end=0x42a30000
## Loading init Ramdisk from Legacy Image at 4ff00000 ...
   Image Name:   uInitrd
   Image Type:   AArch64 Linux RAMDisk Image (gzip compressed)
   Data Size:    16748263 Bytes = 16 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 4fa00000
   Booting using the fdt blob at 0x4fa00000
Working FDT set to 4fa00000
   Loading Ramdisk to 49007000, end 49fffee7 ... OK
   Loading Device Tree to 0000000048f96000, end 0000000049006fff ... OK
Working FDT set to 48f96000

Starting kernel ...

efi: UEFI not found.
OF: reserved mem: Reserved memory: No reserved-memory node in the DT
cma: Reserved 64 MiB at 0x00000000bb800000
psci: probing for conduit method from DT.
psci: PSCIv1.1 detected in firmware.
psci: Using standard PSCI v0.2 function IDs
psci: MIGRATE_INFO_TYPE not supported.
psci: SMC Calling Convention v1.5
Zone ranges:
  DMA      [mem 0x0000000040000000-0x00000000bfffffff]
  DMA32    empty
  Normal   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000040000000-0x00000000bfffffff]
Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff]
percpu: Embedded 33 pages/cpu s98072 r8192 d28904 u135168
pcpu-alloc: s98072 r8192 d28904 u135168 alloc=33*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
Detected VIPT I-cache on CPU0
CPU features: detected: GICv3 CPU interface
CPU features: detected: Virtualization Host Extensions
CPU features: detected: ARM errata 1165522, 1319367, or 1530923
alternatives: applying boot alternatives
Kernel command line: root=UUID=3d6bd475-4f46-478d-914a-e1a20cb500c0 rootwait rootfstype=ext4 splash=verbose console=ttyS0,115200 console=tty1 consoleblank=0 loglevel=1 ubootpart=1afcb943-c6d1-4fd3-a581-e52d0eace6b3 usb-storage.quirks= earlycon=uart8250,mmio32,0x02500000 console=ttyAS0,115200 loglevel=8 clk_ignore_unused  cgroup_enable=memory
Unknown kernel command line parameters "splash=verbose ubootpart=1afcb943-c6d1-4fd3-a581-e52d0eace6b3 cgroup_enable=memory", will be passed to user space.
printk: log buffer data + meta data: 131072 + 458752 = 589824 bytes
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
software IO TLB: SWIOTLB bounce buffer size adjusted to 2MB
software IO TLB: area num 8.
software IO TLB: mapped [mem 0x00000000b9500000-0x00000000b9700000] (2MB)
Built 1 zonelists, mobility grouping on.  Total pages: 524288
mem auto-init: stack:all(zero), heap alloc:off, heap free:off
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
ftrace: allocating 59479 entries in 234 pages
ftrace: allocated 234 pages with 5 groups

**********************************************************
**   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
**                                                      **
** trace_printk() being used. Allocating extra memory.  **
**                                                      **
** This means that this is a DEBUG kernel and it is     **
** unsafe for production use.                           **
**                                                      **
** If you see this message and you are not debugging    **
** the kernel, report this immediately to your vendor!  **
**                                                      **
**   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
**********************************************************
rcu: Preemptible hierarchical RCU implementation.
        Trampoline variant of Tasks RCU enabled.
        Rude variant of Tasks RCU enabled.
        Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
GIC: enabling workaround for GICv3: non-coherent attribute
GICv3: GIC: Using split EOI/Deactivate mode
GICv3: 256 SPIs implemented
GICv3: 0 Extended SPIs implemented
Root IRQ handler: gic_handle_irq
GICv3: GICv3 features: 16 PPIs
GICv3: GICD_CTLR.DS=0, SCR_EL3.FIQ=0
GICv3: CPU0: found redistributor 0 region 0:0x0000000003460000
ITS [mem 0x03440000-0x0345ffff]
GIC: enabling workaround for ITS: non-coherent attribute
ITS@0x0000000003440000: allocated 8192 Devices @42ff0000 (indirect, esz 8, psz 64K, shr 0)
ITS@0x0000000003440000: allocated 32768 Interrupt Collections @43400000 (flat, esz 2, psz 64K, shr 0)
ITS: using cache flushing for cmd queue
GICv3: using LPI property table @0x0000000043410000
GIC: using cache flushing for LPI property table
GICv3: CPU0: using allocated LPI pending table @0x0000000043420000
rcu: srcu_init: Setting srcu_struct sizes based on contention.
arch_timer: cp15 timer running at 24.00MHz (phys).
clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
Console: colour dummy device 80x25
printk: legacy console [tty1] enabled
Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
pid_max: default: 32768 minimum: 301
Yama: becoming mindful.
SELinux:  Initializing.
TOMOYO Linux initialized
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
VFS: Finished mounting rootfs on nullfs
cacheinfo: Unable to detect cache hierarchy for CPU 0
rcu: Hierarchical SRCU implementation.
rcu:    Max phase no-delay instances is 1000.
Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
EFI services will not be available.
smp: Bringing up secondary CPUs ...
Detected VIPT I-cache on CPU1
GICv3: CPU1: found redistributor 100 region 0:0x0000000003480000
GICv3: CPU1: using allocated LPI pending table @0x0000000043430000
CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
Detected VIPT I-cache on CPU2
GICv3: CPU2: found redistributor 200 region 0:0x00000000034a0000
GICv3: CPU2: using allocated LPI pending table @0x0000000043440000
CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
Detected VIPT I-cache on CPU3
GICv3: CPU3: found redistributor 300 region 0:0x00000000034c0000
GICv3: CPU3: using allocated LPI pending table @0x0000000043450000
CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
Detected VIPT I-cache on CPU4
GICv3: CPU4: found redistributor 400 region 0:0x00000000034e0000
GICv3: CPU4: using allocated LPI pending table @0x0000000043460000
CPU4: Booted secondary processor 0x0000000400 [0x412fd050]
Detected VIPT I-cache on CPU5
GICv3: CPU5: found redistributor 500 region 0:0x0000000003500000
GICv3: CPU5: using allocated LPI pending table @0x0000000043470000
CPU5: Booted secondary processor 0x0000000500 [0x412fd050]
Detected VIPT I-cache on CPU6
GICv3: CPU6: found redistributor 600 region 0:0x0000000003520000
GICv3: CPU6: using allocated LPI pending table @0x0000000043480000
CPU6: Booted secondary processor 0x0000000600 [0x412fd050]
Detected VIPT I-cache on CPU7
GICv3: CPU7: found redistributor 700 region 0:0x0000000003540000
GICv3: CPU7: using allocated LPI pending table @0x0000000043490000
CPU7: Booted secondary processor 0x0000000700 [0x412fd050]
smp: Brought up 1 node, 8 CPUs
SMP: Total of 8 processors activated.
CPU: All CPU(s) started at EL2
CPU features: detected: 32-bit EL0 Support
CPU features: detected: 32-bit EL1 Support
CPU features: detected: Data cache clean to the PoU not required for I/D coherence
CPU features: detected: Common not Private translations
CPU features: detected: CRC32 instructions
CPU features: detected: RCpc load-acquire (LDAPR)
CPU features: detected: LSE atomic instructions
CPU features: detected: Privileged Access Never
CPU features: detected: PMUv3
CPU features: detected: XNX
CPU features: detected: Speculative Store Bypassing Safe (SSBS)
alternatives: applying system-wide alternatives
CPU features: detected: ICV_DIR_EL1 trapping
Memory: 1907372K/2097152K available (17792K kernel code, 2830K rwdata, 12200K rodata, 7232K init, 876K bss, 100820K reserved, 65536K cma-reserved)
devtmpfs: initialized
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
posixtimers hash table entries: 4096 (order: 4, 65536 bytes, linear)
futex hash table entries: 2048 (131072 bytes on 1 NUMA nodes, total 128 KiB, linear).
22480 pages in range for non-PLT usage
514000 pages in range for PLT usage
DMI not present or invalid.
NET: Registered PF_NETLINK/PF_ROUTE protocol family
DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(0.260:1): state=initialized audit_enabled=0 res=1
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
cpuidle: using governor ladder
cpuidle: using governor menu
hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
ASID allocator initialised with 65536 entries
/soc/clock-controller@2001000: Fixed dependency cycle(s) with /soc/rtc@7090000
/soc/interrupt-controller@3400000: Fixed dependency cycle(s) with /soc/interrupt-controller@3400000
/soc/clock-controller@7010000: Fixed dependency cycle(s) with /soc/clock-controller@2001000
/soc/clock-controller@7010000: Fixed dependency cycle(s) with /soc/rtc@7090000
/soc/rtc@7090000: Fixed dependency cycle(s) with /soc/clock-controller@7010000
/soc/clock-controller@2001000: Fixed dependency cycle(s) with /soc/rtc@7090000
/soc/pcie@4800000: Fixed dependency cycle(s) with /soc/pcie@4800000/legacy-interrupt-controller
/soc/clock-controller@7010000: Fixed dependency cycle(s) with /soc/clock-controller@2001000
/soc/clock-controller@7010000: Fixed dependency cycle(s) with /soc/rtc@7090000
/soc/i2c@7081400: Fixed dependency cycle(s) with /soc/pinctrl@7022000/r-i2c-pins
/soc/clock-controller@7010000: Fixed dependency cycle(s) with /soc/rtc@7090000
/soc/clock-controller@2001000: Fixed dependency cycle(s) with /soc/rtc@7090000
/soc/rtc@7090000: Fixed dependency cycle(s) with /soc/clock-controller@7010000
fbcon: Taking over console
iommu: Default domain type: Translated
iommu: DMA domain TLB invalidation policy: strict mode
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
mc: Linux media interface: v0.10
videodev: Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
PTP clock support registered
Advanced Linux Sound Architecture Driver Initialized.
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel:  unlabeled traffic allowed by default
mctp: management component transport protocol core
NET: Registered PF_MCTP protocol family
vgaarb: loaded
clocksource: Switched to clocksource arch_sys_counter
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
netfs: FS-Cache loaded
CacheFiles: Loaded
NET: Registered PF_INET protocol family
IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
TCP: Hash tables configured (established 16384 bind 16384)
UDP hash table entries: 1024 (order: 4, 65536 bytes, linear)
UDP-Lite hash table entries: 1024 (order: 4, 65536 bytes, linear)
NET: Registered PF_UNIX/PF_LOCAL protocol family
NET: Registered PF_XDP protocol family
PCI: CLS 0 bytes, default 64
Unpacking initramfs...
kvm [1]: nv: 570 coarse grained trap handlers
kvm [1]: nv: 664 fine grained trap handlers
kvm [1]: IPA Size Limit: 40 bits
kvm [1]: GICv3: no GICV resource entry
kvm [1]: disabling GICv2 emulation
kvm [1]: GIC system register CPU interface enabled
kvm [1]: vgic interrupt IRQ9
kvm [1]: VHE mode initialized successfully
Initialise system trusted keyrings
workingset: timestamp_bits=46 max_order=19 bucket_order=0
squashfs: version 4.0 (2009/01/31) Phillip Lougher
SGI XFS with ACLs, security attributes, scrub, repair, no debug enabled
cryptd: max_cpu_qlen set to 1000
NET: Registered PF_ALG protocol family
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Asymmetric key parser 'pkcs8' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 241)
io scheduler mq-deadline registered
io scheduler bfq registered
ledtrig-cpu: registered to indicate activity on CPUs
Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
misc dump reg init
loop: module loaded
wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <[email protected]>. All Rights Reserved.
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
PPP MPPE Compression module registered
NET: Registered PF_PPPOX protocol family
usbcore: registered new interface driver usblp
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
sun6i-rtc 7090000.rtc: registered as rtc0
sun6i-rtc 7090000.rtc: setting system clock to 1970-01-02T00:00:08 UTC (86408)
i2c_dev: i2c /dev entries driver
usbcore: registered new interface driver uvcvideo
Driver for 1-wire Dallas network protocol.
sunxi-wdt 2050000.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
SMCCC: SOC_ID: ID = jep106:091e:1890 Revision = 0x00000002
hid: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
hw perfevents: enabled with armv8_cortex_a55 PMU driver, 7 (0,8000003f) counters available
gnss: GNSS driver registered with major 238
usbcore: registered new interface driver snd-usb-audio
NET: Registered PF_INET6 protocol family
Segment Routing with IPv6
In-situ OAM (IOAM) with IPv6
NET: Registered PF_PACKET protocol family
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
9pnet: Installing 9P2000 support
Key type dns_resolver registered
registered taskstats version 1
Loading compiled-in X.509 certificates
zswap: loaded using pool lzo
Key type .fscrypt registered
Key type fscrypt-provisioning registered
Key type encrypted registered
sunxi iommu: irq = 18
inno-combphy 4f00000.phy: Sub System Version: 0x10000
gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation.
sun55i-a523-r-pinctrl 7022000.pinctrl: initialized sunXi PIO driver
sun55i-a523-r-pinctrl 7022000.pinctrl: supply vcc-pl not found, using dummy regulator
axp20x-i2c 0-0034: AXP20x variant AXP717 found
axp20x-i2c 0-0034: Failed to set masks in 0x40: -6
axp20x-i2c 0-0034: failed to add irq chip: -6
axp20x-i2c 0-0036: AXP20x variant AXP323 found
axp20x-i2c 0-0036: AXP20X driver loaded
phy phy-4100400.phy.1: Changing dr_mode to 1
ehci-platform 4200000.usb: EHCI Host Controller
ohci-platform 4200400.usb: Generic Platform OHCI controller
ohci-platform 4200400.usb: new USB bus registered, assigned bus number 1
ohci-platform 4200400.usb: irq 138, io mem 0x04200400
ohci-platform 4101400.usb: Generic Platform OHCI controller
WCN: marlin_init entry!
WCN: wcn config bt wake host
WCN_ERR: dts node for bt_wake not found
WCN: marlin2 parse_dt some para not config
sdiohal:sdiohal_parse_dt adma_tx:1, adma_rx:1, pwrseq:0, irq type:data, gpio_num:0, blksize:840
ehci-platform 4200000.usb: new USB bus registered, assigned bus number 2
sdiohal:sdiohal_init ok
WCN: marlin_probe ok!
clk: Not disabling unused clocks
PM: genpd: Disabling unused power domains
ALSA device list:
  No soundcards found.
ohci-platform 4101400.usb: new USB bus registered, assigned bus number 3
ehci-platform 4200000.usb: irq 136, io mem 0x04200000
ohci-platform 4101400.usb: irq 137, io mem 0x04101400
ehci-platform 4200000.usb: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 7.00
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: Generic Platform OHCI controller
usb usb1: Manufacturer: Linux 7.0.12-edge-sunxi64 ohci_hcd
usb usb1: SerialNumber: 4200400.usb
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 7.00
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 7.0.12-edge-sunxi64 ehci_hcd
usb usb2: SerialNumber: 4200000.usb
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 7.00
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: Generic Platform OHCI controller
usb usb3: Manufacturer: Linux 7.0.12-edge-sunxi64 ohci_hcd
usb usb3: SerialNumber: 4101400.usb
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
Freeing initrd memory: 16352K
usb 2-1: new high-speed USB device number 2 using ehci-platform
usb 2-1: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-1: Product: USB 2.0 Hub
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 4 ports detected
ehci-platform 4101000.usb: EHCI Host Controller
ehci-platform 4101000.usb: new USB bus registered, assigned bus number 4
ehci-platform 4101000.usb: irq 135, io mem 0x04101000
ehci-platform 4101000.usb: USB 2.0 started, EHCI 1.00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 7.00
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 7.0.12-edge-sunxi64 ehci_hcd
usb usb4: SerialNumber: 4101000.usb
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
Freeing unused kernel memory: 7232K
Run /init as init process
  with arguments:
    /init
  with environment:
    HOME=/
    TERM=linux
    splash=verbose
    ubootpart=1afcb943-c6d1-4fd3-a581-e52d0eace6b3
    cgroup_enable=memory
random: crng init done
usb_phy_generic usb_phy_generic.1.auto: dummy supplies not allowed for exclusive requests (id=vbus)
raid6: neonx8   gen()  1455 MB/s
raid6: neonx4   gen()  1432 MB/s
raid6: neonx2   gen()  1388 MB/s
raid6: neonx1   gen()  1211 MB/s
raid6: int64x8  gen()   908 MB/s
raid6: int64x4  gen()  1000 MB/s
raid6: int64x2  gen()   953 MB/s
raid6: int64x1  gen()   747 MB/s
raid6: using algorithm neonx8 gen() 1455 MB/s
raid6: .... xor() 1077 MB/s, rmw enabled
raid6: using neon recovery algorithm
xor: automatically using best checksumming function   32regs
Btrfs loaded, zoned=no, fsverity=no
platform 4021000.mmc: deferred probe pending: platform: wait for supplier /soc/i2c@7081400/pmic@34/regulators/bldo1
platform wifi-pwrseq: deferred probe pending: pwrseq_simple: reset GPIOs not ready
platform gma340-oe: deferred probe pending: platform: supplier 2000000.pinctrl not ready
platform 4020000.mmc: deferred probe pending: platform: wait for supplier /soc/i2c@7081400/pmic@34/regulators/cldo3
platform gma340-pcie: deferred probe pending: platform: supplier 2000000.pinctrl not ready
platform 2000000.pinctrl: deferred probe pending: platform: wait for supplier /soc/i2c@7081400/pmic@34/regulators/cldo4
platform 4800000.pcie: deferred probe pending: platform: supplier 2000000.pinctrl not ready
platform 2500000.serial: deferred probe pending: (reason unknown)
platform 2500400.serial: deferred probe pending: platform: wait for supplier /soc/pinctrl@2000000/uart1-rts-cts-pins
platform 4500000.ethernet: deferred probe pending: platform: wait for supplier /soc/i2c@7081400/pmic@34/regulators/cldo3
platform 4510000.ethernet: deferred probe pending: platform: wait for supplier /soc/i2c@7081400/pmic@34/regulators/cldo4
sunxi-pck-600 7060000.power-controller: sync_state() pending due to 4800000.pcie
sunxi-pck-600 7060000.power-controller: sync_state() pending due to 4510000.ethernet
sunxi-pck-600 7060000.power-controller: sync_state() pending due to 1800000.gpu
sun20i-ppu 7001400.power-controller: sync_state() pending due to 7122000.npu
irq 87: nobody cared (try booting with the "irqpoll" option)
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 7.0.12-edge-sunxi64 #8 PREEMPT
Hardware name: Radxa Cubie A5E (DT)
Call trace:
 show_stack+0x1c/0x30 (C)
 dump_stack_lvl+0x6c/0x80
 dump_stack+0x14/0x20
 __report_bad_irq+0x3c/0x100
 note_interrupt+0x2fc/0x348
 handle_irq_event+0x9c/0x100
 handle_fasteoi_irq+0x104/0x1a0
 handle_irq_desc+0x44/0x60
 generic_handle_domain_irq+0x1c/0x30
 sunxi_sc_nmi_handle_irq+0x38/0xc8
 handle_irq_desc+0x44/0x60
 generic_handle_domain_irq+0x1c/0x30
 gic_handle_irq+0x54/0xc8
 call_on_irq_stack+0x30/0x58
 do_interrupt_handler+0x80/0x90
 el1_interrupt+0x38/0x58
 el1h_64_irq_handler+0x14/0x20
 el1h_64_irq+0x6c/0x70
 default_idle_call+0x3c/0x210 (P)
 do_idle+0x248/0x298
 cpu_startup_entry+0x3c/0x48
 rest_init+0xe0/0xe8
 start_kernel+0x758/0x930
 __primary_switched+0x88/0x98
handlers:
[<00000000390d6a2a>] irq_default_primary_handler threaded [<0000000039f2bff3>] regmap_irq_thread
Disabling IRQ #87