API tools faq
paste
Guest User

Untitled

a guest
Apr 15th, 2019
163
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 55.16 KB
raw download clone embed print report
  1. [ 0.000000] Linux version 4.14.111 (koen@bob) (gcc version 7.4.0 (OpenWrt GCC 7.4.0 r9863+5-1c416e3790)) #0 Mon Apr 15 13:00:50 2019
  2. [ 0.000000] bootconsole [early0] enabled
  3. [ 0.000000] CPU0 revision is: 00019750 (MIPS 74Kc)
  4. [ 0.000000] SoC: Qualcomm Atheros QCA9558 ver 1 rev 0
  5. [ 0.000000] Determined physical RAM map:
  6. [ 0.000000] memory: 08000000 @ 00000000 (usable)
  7. [ 0.000000] User-defined physical RAM map:
  8. [ 0.000000] memory: 08000000 @ 00000000 (usable)
  9. [ 0.000000] Initrd not found or empty - disabling initrd
  10. [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
  11. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
  12. [ 0.000000] Zone ranges:
  13. [ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff]
  14. [ 0.000000] Movable zone start for each node
  15. [ 0.000000] Early memory node ranges
  16. [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff]
  17. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
  18. [ 0.000000] On node 0 totalpages: 32768
  19. [ 0.000000] free_area_init_node: node 0, pgdat 80503c90, node_mem_map 81000020
  20. [ 0.000000] Normal zone: 256 pages used for memmap
  21. [ 0.000000] Normal zone: 0 pages reserved
  22. [ 0.000000] Normal zone: 32768 pages, LIFO batch:7
  23. [ 0.000000] random: get_random_bytes called from start_kernel+0x8c/0x474 with crng_init=0
  24. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  25. [ 0.000000] pcpu-alloc: [0] 0
  26. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32512
  27. [ 0.000000] Kernel command line: parts=1 boot_part_size=4194304 gpio=553638447 HZ=360000000 mem=128M kmac=74:4D:28:0A:1E:43 board=922gs board=922gs ver=3.41 hw_opt=00780005 boot=1 mlc=11 console=ttyS0,115200 rootfstype=squashfs noinitrd
  28. [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
  29. [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
  30. [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
  31. [ 0.000000] Writing ErrCtl register=00000000
  32. [ 0.000000] Readback ErrCtl register=00000000
  33. [ 0.000000] Memory: 124304K/131072K available (3734K kernel code, 161K rwdata, 860K rodata, 228K init, 202K bss, 6768K reserved, 0K cma-reserved)
  34. [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  35. [ 0.000000] NR_IRQS: 51
  36. [ 0.000000] Clocks: CPU:720.000MHz, DDR:600.000MHz, AHB:240.000MHz, Ref:40.000MHz
  37. [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 5309056796 ns
  38. [ 0.000007] sched_clock: 32 bits at 360MHz, resolution 2ns, wraps every 5965232126ns
  39. [ 0.008683] Calibrating delay loop... 358.80 BogoMIPS (lpj=1794048)
  40. [ 0.075687] pid_max: default: 32768 minimum: 301
  41. [ 0.081012] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  42. [ 0.088385] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  43. [ 0.098173] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  44. [ 0.109169] futex hash table entries: 256 (order: -1, 3072 bytes)
  45. [ 0.116897] NET: Registered protocol family 16
  46. [ 0.126435] MIPS: machine is MikroTik RouterBOARD 922UAGS-5HPacD
  47. [ 0.373660] ar724x-pci ar724x-pci.0: PCIe link is down
  48. [ 0.379388] registering PCI controller with io_map_base unset
  49. [ 0.385956] registering PCI controller with io_map_base unset
  50. [ 0.405782] PCI host bridge to bus 0000:00
  51. [ 0.410392] pci_bus 0000:00: root bus resource [mem 0x10000000-0x11ffffff]
  52. [ 0.418046] pci_bus 0000:00: root bus resource [io 0x0000]
  53. [ 0.424259] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
  54. [ 0.431818] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
  55. [ 0.440663] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
  56. [ 0.440766] PCI host bridge to bus 0000:01
  57. [ 0.445327] pci_bus 0000:01: root bus resource [mem 0x12000000-0x13ffffff]
  58. [ 0.453003] pci_bus 0000:01: root bus resource [io 0x0001]
  59. [ 0.459203] pci_bus 0000:01: root bus resource [??? 0x00000000 flags 0x0]
  60. [ 0.466770] pci_bus 0000:01: No busn resource found for root bus, will use [bus 01-ff]
  61. [ 0.475621] pci 0000:01:00.0: [168c:003c] type 00 class 0x028000
  62. [ 0.475680] pci 0000:01:00.0: reg 0x10: [mem 0x12000000-0x121fffff 64bit]
  63. [ 0.475761] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
  64. [ 0.475832] pci 0000:01:00.0: supports D1 D2
  65. [ 0.476007] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
  66. [ 0.476028] pci 0000:01:00.0: BAR 0: assigned [mem 0x12000000-0x121fffff 64bit]
  67. [ 0.484215] pci 0000:01:00.0: BAR 6: assigned [mem 0x12200000-0x1220ffff pref]
  68. [ 0.492826] clocksource: Switched to clocksource MIPS
  69. [ 0.499300] NET: Registered protocol family 2
  70. [ 0.504784] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
  71. [ 0.512557] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  72. [ 0.519681] TCP: Hash tables configured (established 1024 bind 1024)
  73. [ 0.526873] UDP hash table entries: 256 (order: 0, 4096 bytes)
  74. [ 0.533420] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  75. [ 0.540640] NET: Registered protocol family 1
  76. [ 0.545562] PCI: CLS 0 bytes, default 32
  77. [ 0.549680] Crashlog allocated RAM at address 0x3f00000
  78. [ 0.556582] workingset: timestamp_bits=30 max_order=15 bucket_order=0
  79. [ 0.567796] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  80. [ 0.574330] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  81. [ 0.593132] io scheduler noop registered
  82. [ 0.597501] io scheduler deadline registered (default)
  83. [ 0.603531] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
  84. [ 0.610908] console [ttyS0] disabled
  85. [ 0.634978] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 2500000) is a 16550A
  86. [ 0.644599] console [ttyS0] enabled
  87. [ 0.652008] bootconsole [early0] disabled
  88. [ 0.663597] m25p80 spi0.0: found w25x05, expected m25p80
  89. [ 0.679966] m25p80 spi0.0: w25x05 (64 Kbytes)
  90. [ 0.684797] Creating 4 MTD partitions on "spi0.0":
  91. [ 0.689665] 0x000000000000-0x00000000c000 : "routerboot"
  92. [ 0.696417] 0x00000000c000-0x00000000d000 : "hard_config"
  93. [ 0.703038] 0x00000000d000-0x00000000e000 : "bios"
  94. [ 0.709487] 0x00000000e000-0x00000000f000 : "soft_config"
  95. [ 0.717100] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xf1
  96. [ 0.723579] nand: Samsung NAND 128MiB 3,3V 8-bit
  97. [ 0.728264] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
  98. [ 0.735978] Scanning device for bad blocks
  99. [ 0.746328] random: fast init done
  100. [ 0.880912] Creating 3 MTD partitions on "ar934x-nfc":
  101. [ 0.886177] 0x000000000000-0x000000040000 : "booter"
  102. [ 0.892514] 0x000000040000-0x000000400000 : "kernel"
  103. [ 0.898701] 0x000000400000-0x000008000000 : "ubi"
  104. [ 0.907840] libphy: Fixed MDIO Bus: probed
  105. [ 0.925237] libphy: ag71xx_mdio: probed
  106. [ 1.654795] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:04 [uid=004dd074, driver=Atheros 8031 ethernet]
  107. [ 1.665431] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RGMII
  108. [ 1.672384] NET: Registered protocol family 17
  109. [ 1.676988] 8021q: 802.1Q VLAN Support v1.8
  110. [ 1.686266] UBI: auto-attach mtd6
  111. [ 1.689653] ubi0: attaching mtd6
  112. [ 3.211140] ubi0: scanning is finished
  113. [ 3.231983] ubi0: attached mtd6 (name "ubi", size 124 MiB)
  114. [ 3.237596] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  115. [ 3.244578] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
  116. [ 3.251460] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
  117. [ 3.258524] ubi0: good PEBs: 992, bad PEBs: 0, corrupted PEBs: 0
  118. [ 3.264623] ubi0: user volume: 3, internal volumes: 1, max. volumes count: 128
  119. [ 3.271947] ubi0: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1222256627
  120. [ 3.281211] ubi0: available PEBs: 0, total reserved PEBs: 992, PEBs reserved for bad PEB handling: 20
  121. [ 3.290608] ubi0: background thread "ubi_bgt0d" started, PID 303
  122. [ 3.298155] block ubiblock0_1: created from ubi0:1(rootfs)
  123. [ 3.303766] ubiblock: device ubiblock0_1 (rootfs) set to be root filesystem
  124. [ 3.321178] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
  125. [ 3.329324] Freeing unused kernel memory: 228K
  126. [ 3.333848] This architecture does not have kernel memory protection.
  127. [ 3.888493] init: Console is alive
  128. [ 3.892127] init: - watchdog -
  129. [ 4.085834] random: crng init done
  130. [ 5.318689] kmodloader: loading kernel modules from /etc/modules-boot.d/*
  131. [ 5.404134] pps_core: LinuxPPS API ver. 1 registered
  132. [ 5.409176] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  133. [ 5.420105] PTP clock support registered
  134. [ 5.434299] usbcore: registered new interface driver usbfs
  135. [ 5.439939] usbcore: registered new interface driver hub
  136. [ 5.445433] usbcore: registered new device driver usb
  137. [ 5.477722] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  138. [ 5.492002] SCSI subsystem initialized
  139. [ 5.499818] ehci-platform: EHCI generic platform driver
  140. [ 5.505235] ehci-platform ehci-platform.0: EHCI Host Controller
  141. [ 5.511269] ehci-platform ehci-platform.0: new USB bus registered, assigned bus number 1
  142. [ 5.521537] ehci-platform ehci-platform.0: TX-TX IDP fix enabled
  143. [ 5.527649] ehci-platform ehci-platform.0: irq 48, io mem 0x1b000000
  144. [ 5.562867] ehci-platform ehci-platform.0: USB 2.0 started, EHCI 1.00
  145. [ 5.570062] hub 1-0:1.0: USB hub found
  146. [ 5.574186] hub 1-0:1.0: 1 port detected
  147. [ 5.578563] ehci-platform ehci-platform.1: EHCI Host Controller
  148. [ 5.584636] ehci-platform ehci-platform.1: new USB bus registered, assigned bus number 2
  149. [ 5.594939] ehci-platform ehci-platform.1: TX-TX IDP fix enabled
  150. [ 5.601038] ehci-platform ehci-platform.1: irq 49, io mem 0x1b400000
  151. [ 5.632868] ehci-platform ehci-platform.1: USB 2.0 started, EHCI 1.00
  152. [ 5.640050] hub 2-0:1.0: USB hub found
  153. [ 5.644171] hub 2-0:1.0: 1 port detected
  154. [ 5.649093] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
  155. [ 5.666816] init: - preinit -
  156. [ 9.574907] eth0: link up (1000Mbps/Full duplex)
  157. [ 9.725254] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" started, PID 411
  158. [ 9.810679] UBIFS (ubi0:2): recovery needed
  159. [ 9.981380] UBIFS (ubi0:2): recovery completed
  160. [ 9.986009] UBIFS (ubi0:2): UBIFS: mounted UBI device 0, volume 2, name "rootfs_data"
  161. [ 9.993969] UBIFS (ubi0:2): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
  162. [ 10.004029] UBIFS (ubi0:2): FS size: 111484928 bytes (106 MiB, 878 LEBs), journal size 5586944 bytes (5 MiB, 44 LEBs)
  163. [ 10.014787] UBIFS (ubi0:2): reserved for root: 4952683 bytes (4836 KiB)
  164. [ 10.021498] UBIFS (ubi0:2): media format: w4/r0 (latest is w5/r0), UUID 3305F565-9CEE-4351-9277-BCFF54B9F2E4, small LPT model
  165. [ 10.055090] mount_root: switching to ubifs overlay
  166. [ 10.115981] urandom-seed: Seeding with /etc/urandom.seed
  167. [ 10.223797] eth0: link down
  168. [ 10.236663] procd: - early -
  169. [ 10.239670] procd: - watchdog -
  170. [ 10.888750] procd: - watchdog -
  171. [ 10.892168] procd: - ubus -
  172. [ 11.050660] procd: - init -
  173. [ 11.542250] kmodloader: loading kernel modules from /etc/modules.d/*
  174. [ 11.562104] tun: Universal TUN/TAP device driver, 1.6
  175. [ 11.586098] cryptodev: driver 1.10 loaded.
  176. [ 11.593216] i2c /dev entries driver
  177. [ 11.605624] usbcore: registered new interface driver cdc_acm
  178. [ 11.611370] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  179. [ 11.682999] usbcore: registered new interface driver cdc_wdm
  180. [ 11.690342] Loading modules backported from Linux version v5.1-rc2-0-g8c2ffd917477
  181. [ 11.698065] Backport generated by backports.git v5.1-rc2-1-0-g2fee410f
  182. [ 11.707655] hso: drivers/net/usb/hso.c: Option Wireless
  183. [ 11.713117] usbcore: registered new interface driver hso
  184. [ 11.724345] nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
  185. [ 11.896552] usbcore: registered new interface driver usbserial
  186. [ 11.902529] usbcore: registered new interface driver usbserial_generic
  187. [ 11.909270] usbserial: USB Serial support registered for generic
  188. [ 11.933229] xt_time: kernel timezone is -0000
  189. [ 11.939561] usbcore: registered new interface driver cdc_ether
  190. [ 11.948254] usbcore: registered new interface driver cdc_ncm
  191. [ 11.958295] usbcore: registered new interface driver cdc_subset
  192. [ 12.011140] usbcore: registered new interface driver ftdi_sio
  193. [ 12.017087] usbserial: USB Serial support registered for FTDI USB Serial Device
  194. [ 12.156635] usbcore: registered new interface driver huawei_cdc_ncm
  195. [ 12.171758] ip_tables: (C) 2000-2006 Netfilter Core Team
  196. [ 12.215950] PPP generic driver version 2.4.2
  197. [ 12.222482] NET: Registered protocol family 24
  198. [ 12.229282] usbcore: registered new interface driver qmi_wwan
  199. [ 12.237514] usbcore: registered new interface driver rndis_host
  200. [ 12.245622] usbcore: registered new interface driver sierra
  201. [ 12.251349] usbserial: USB Serial support registered for Sierra USB modem
  202. [ 12.260625] usbcore: registered new interface driver sierra_net
  203. [ 12.297293] pci 0000:01:00.0: using irq 41 for pin 1
  204. [ 12.302334] ath10k 4.19 driver, optimized for CT firmware, probing pci device: 0x3c.
  205. [ 12.311549] ath10k_pci 0000:01:00.0: pci irq legacy oper_irq_mode 1 irq_mode 0 reset_mode 0
  206. [ 12.589377] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/fwcfg-pci-0000:01:00.0.txt failed with error -2
  207. [ 12.600087] ath10k_pci 0000:01:00.0: Falling back to user helper
  208. [ 12.671624] firmware ath10k!fwcfg-pci-0000:01:00.0.txt: firmware_loading_store: map pages failed
  209. [ 12.680858] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:01:00.0.bin failed with error -2
  210. [ 12.691739] ath10k_pci 0000:01:00.0: Falling back to user helper
  211. [ 12.828799] firmware ath10k!pre-cal-pci-0000:01:00.0.bin: firmware_loading_store: map pages failed
  212. [ 12.843358] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/ct-firmware-5.bin failed with error -2
  213. [ 12.854528] ath10k_pci 0000:01:00.0: Falling back to user helper
  214. [ 12.987479] firmware ath10k!QCA988X!hw2.0!ct-firmware-5.bin: firmware_loading_store: map pages failed
  215. [ 12.997104] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/ct-firmware-2.bin failed with error -2
  216. [ 13.008244] ath10k_pci 0000:01:00.0: Falling back to user helper
  217. [ 13.144342] firmware ath10k!QCA988X!hw2.0!ct-firmware-2.bin: firmware_loading_store: map pages failed
  218. [ 13.153963] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-6.bin failed with error -2
  219. [ 13.164840] ath10k_pci 0000:01:00.0: Falling back to user helper
  220. [ 13.300380] firmware ath10k!QCA988X!hw2.0!firmware-6.bin: firmware_loading_store: map pages failed
  221. [ 13.309741] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-5.bin failed with error -2
  222. [ 13.320620] ath10k_pci 0000:01:00.0: Falling back to user helper
  223. [ 13.455923] firmware ath10k!QCA988X!hw2.0!firmware-5.bin: firmware_loading_store: map pages failed
  224. [ 13.465285] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-4.bin failed with error -2
  225. [ 13.476159] ath10k_pci 0000:01:00.0: Falling back to user helper
  226. [ 13.612380] firmware ath10k!QCA988X!hw2.0!firmware-4.bin: firmware_loading_store: map pages failed
  227. [ 13.621739] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-3.bin failed with error -2
  228. [ 13.632613] ath10k_pci 0000:01:00.0: Falling back to user helper
  229. [ 13.768201] firmware ath10k!QCA988X!hw2.0!firmware-3.bin: firmware_loading_store: map pages failed
  230. [ 13.781209] ath10k_pci 0000:01:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043222ff sub 19b6:d042
  231. [ 13.790604] ath10k_pci 0000:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 1 testmode 0
  232. [ 13.803046] ath10k_pci 0000:01:00.0: firmware ver 10.1-ct-8x-__fW-022-883e26a8 api 2 features wmi-10.x,has-wmi-mgmt-tx,mfp,txstatus-noack,wmi-10.x-CT,ratemask-CT,txrate-CT,get-temp-CT,tx-rc-CT,cust-stats-CT,retry-gt2-CT,txrate2-CT,beacon-cb-CT crc32 7a67ce60
  233. [ 13.908329] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/board-2.bin failed with error -2
  234. [ 13.918966] ath10k_pci 0000:01:00.0: Falling back to user helper
  235. [ 13.994485] firmware ath10k!QCA988X!hw2.0!board-2.bin: firmware_loading_store: map pages failed
  236. [ 14.014188] ath10k_pci 0000:01:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
  237. [ 14.940205] ath10k_pci 0000:01:00.0: 10.1 wmi init: vdevs: 16 peers: 127 tid: 256
  238. [ 14.958147] ath10k_pci 0000:01:00.0: wmi print 'P 128 V 8 T 410'
  239. [ 14.964472] ath10k_pci 0000:01:00.0: wmi print 'msdu-desc: 1424 sw-crypt: 0 ct-sta: 0'
  240. [ 14.972597] ath10k_pci 0000:01:00.0: wmi print 'alloc rem: 24680 iram: 26872'
  241. [ 15.044620] ath10k_pci 0000:01:00.0: htt-ver 2.1 wmi-op 2 htt-op 2 cal file max-sta 128 raw 0 hwcrypto 1
  242. [ 15.057412] ath10k_pci 0000:01:00.0: NOTE: Firmware DBGLOG output disabled in debug_mask: 0x10000000
  243. [ 15.196115] ath: EEPROM regdomain: 0x0
  244. [ 15.196121] ath: EEPROM indicates default country code should be used
  245. [ 15.196124] ath: doing EEPROM country->regdmn map search
  246. [ 15.196136] ath: country maps to regdmn code: 0x3a
  247. [ 15.196141] ath: Country alpha2 being used: US
  248. [ 15.196144] ath: Regpair used: 0x3a
  249. [ 15.310666] usbcore: registered new interface driver cdc_mbim
  250. [ 15.318699] usbcore: registered new interface driver option
  251. [ 15.324474] usbserial: USB Serial support registered for GSM modem (1-port)
  252. [ 15.336310] usbcore: registered new interface driver qcserial
  253. [ 15.342202] usbserial: USB Serial support registered for Qualcomm USB modem
  254. [ 15.407232] kmodloader: done loading kernel modules from /etc/modules.d/*
  255. [ 21.373913] br-wan: port 1(eth0) entered blocking state
  256. [ 21.379225] br-wan: port 1(eth0) entered disabled state
  257. [ 21.384768] device eth0 entered promiscuous mode
  258. [ 22.606950] MBT: Init start
  259. [ 22.609799] MBT: Init succesfull
  260. [ 22.623862] MBT: Init netlink interface - OK!
  261. [ 24.534828] eth0: link up (1000Mbps/Full duplex)
  262. [ 24.539547] br-wan: port 1(eth0) entered blocking state
  263. [ 24.544879] br-wan: port 1(eth0) entered forwarding state
  264. [ Node 10 | node-10 ] dmesg -w
  265. [ 0.000000] Linux version 4.14.111 (koen@bob) (gcc version 7.4.0 (OpenWrt GCC 7.4.0 r9863+5-1c416e3790)) #0 Mon Apr 15 13:00:50 2019
  266. [ 0.000000] bootconsole [early0] enabled
  267. [ 0.000000] CPU0 revision is: 00019750 (MIPS 74Kc)
  268. [ 0.000000] SoC: Qualcomm Atheros QCA9558 ver 1 rev 0
  269. [ 0.000000] Determined physical RAM map:
  270. [ 0.000000] memory: 08000000 @ 00000000 (usable)
  271. [ 0.000000] User-defined physical RAM map:
  272. [ 0.000000] memory: 08000000 @ 00000000 (usable)
  273. [ 0.000000] Initrd not found or empty - disabling initrd
  274. [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
  275. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
  276. [ 0.000000] Zone ranges:
  277. [ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff]
  278. [ 0.000000] Movable zone start for each node
  279. [ 0.000000] Early memory node ranges
  280. [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff]
  281. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
  282. [ 0.000000] On node 0 totalpages: 32768
  283. [ 0.000000] free_area_init_node: node 0, pgdat 80503c90, node_mem_map 81000020
  284. [ 0.000000] Normal zone: 256 pages used for memmap
  285. [ 0.000000] Normal zone: 0 pages reserved
  286. [ 0.000000] Normal zone: 32768 pages, LIFO batch:7
  287. [ 0.000000] random: get_random_bytes called from start_kernel+0x8c/0x474 with crng_init=0
  288. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  289. [ 0.000000] pcpu-alloc: [0] 0
  290. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32512
  291. [ 0.000000] Kernel command line: parts=1 boot_part_size=4194304 gpio=553638447 HZ=360000000 mem=128M kmac=74:4D:28:0A:1E:43 board=922gs board=922gs ver=3.41 hw_opt=00780005 boot=1 mlc=11 console=ttyS0,115200 rootfstype=squashfs noinitrd
  292. [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
  293. [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
  294. [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
  295. [ 0.000000] Writing ErrCtl register=00000000
  296. [ 0.000000] Readback ErrCtl register=00000000
  297. [ 0.000000] Memory: 124304K/131072K available (3734K kernel code, 161K rwdata, 860K rodata, 228K init, 202K bss, 6768K reserved, 0K cma-reserved)
  298. [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  299. [ 0.000000] NR_IRQS: 51
  300. [ 0.000000] Clocks: CPU:720.000MHz, DDR:600.000MHz, AHB:240.000MHz, Ref:40.000MHz
  301. [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 5309056796 ns
  302. [ 0.000007] sched_clock: 32 bits at 360MHz, resolution 2ns, wraps every 5965232126ns
  303. [ 0.008683] Calibrating delay loop... 358.80 BogoMIPS (lpj=1794048)
  304. [ 0.075687] pid_max: default: 32768 minimum: 301
  305. [ 0.081012] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  306. [ 0.088385] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  307. [ 0.098173] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  308. [ 0.109169] futex hash table entries: 256 (order: -1, 3072 bytes)
  309. [ 0.116897] NET: Registered protocol family 16
  310. [ 0.126435] MIPS: machine is MikroTik RouterBOARD 922UAGS-5HPacD
  311. [ 0.373660] ar724x-pci ar724x-pci.0: PCIe link is down
  312. [ 0.379388] registering PCI controller with io_map_base unset
  313. [ 0.385956] registering PCI controller with io_map_base unset
  314. [ 0.405782] PCI host bridge to bus 0000:00
  315. [ 0.410392] pci_bus 0000:00: root bus resource [mem 0x10000000-0x11ffffff]
  316. [ 0.418046] pci_bus 0000:00: root bus resource [io 0x0000]
  317. [ 0.424259] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
  318. [ 0.431818] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
  319. [ 0.440663] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
  320. [ 0.440766] PCI host bridge to bus 0000:01
  321. [ 0.445327] pci_bus 0000:01: root bus resource [mem 0x12000000-0x13ffffff]
  322. [ 0.453003] pci_bus 0000:01: root bus resource [io 0x0001]
  323. [ 0.459203] pci_bus 0000:01: root bus resource [??? 0x00000000 flags 0x0]
  324. [ 0.466770] pci_bus 0000:01: No busn resource found for root bus, will use [bus 01-ff]
  325. [ 0.475621] pci 0000:01:00.0: [168c:003c] type 00 class 0x028000
  326. [ 0.475680] pci 0000:01:00.0: reg 0x10: [mem 0x12000000-0x121fffff 64bit]
  327. [ 0.475761] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
  328. [ 0.475832] pci 0000:01:00.0: supports D1 D2
  329. [ 0.476007] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
  330. [ 0.476028] pci 0000:01:00.0: BAR 0: assigned [mem 0x12000000-0x121fffff 64bit]
  331. [ 0.484215] pci 0000:01:00.0: BAR 6: assigned [mem 0x12200000-0x1220ffff pref]
  332. [ 0.492826] clocksource: Switched to clocksource MIPS
  333. [ 0.499300] NET: Registered protocol family 2
  334. [ 0.504784] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
  335. [ 0.512557] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  336. [ 0.519681] TCP: Hash tables configured (established 1024 bind 1024)
  337. [ 0.526873] UDP hash table entries: 256 (order: 0, 4096 bytes)
  338. [ 0.533420] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  339. [ 0.540640] NET: Registered protocol family 1
  340. [ 0.545562] PCI: CLS 0 bytes, default 32
  341. [ 0.549680] Crashlog allocated RAM at address 0x3f00000
  342. [ 0.556582] workingset: timestamp_bits=30 max_order=15 bucket_order=0
  343. [ 0.567796] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  344. [ 0.574330] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  345. [ 0.593132] io scheduler noop registered
  346. [ 0.597501] io scheduler deadline registered (default)
  347. [ 0.603531] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
  348. [ 0.610908] console [ttyS0] disabled
  349. [ 0.634978] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 2500000) is a 16550A
  350. [ 0.644599] console [ttyS0] enabled
  351. [ 0.652008] bootconsole [early0] disabled
  352. [ 0.663597] m25p80 spi0.0: found w25x05, expected m25p80
  353. [ 0.679966] m25p80 spi0.0: w25x05 (64 Kbytes)
  354. [ 0.684797] Creating 4 MTD partitions on "spi0.0":
  355. [ 0.689665] 0x000000000000-0x00000000c000 : "routerboot"
  356. [ 0.696417] 0x00000000c000-0x00000000d000 : "hard_config"
  357. [ 0.703038] 0x00000000d000-0x00000000e000 : "bios"
  358. [ 0.709487] 0x00000000e000-0x00000000f000 : "soft_config"
  359. [ 0.717100] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xf1
  360. [ 0.723579] nand: Samsung NAND 128MiB 3,3V 8-bit
  361. [ 0.728264] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
  362. [ 0.735978] Scanning device for bad blocks
  363. [ 0.746328] random: fast init done
  364. [ 0.880912] Creating 3 MTD partitions on "ar934x-nfc":
  365. [ 0.886177] 0x000000000000-0x000000040000 : "booter"
  366. [ 0.892514] 0x000000040000-0x000000400000 : "kernel"
  367. [ 0.898701] 0x000000400000-0x000008000000 : "ubi"
  368. [ 0.907840] libphy: Fixed MDIO Bus: probed
  369. [ 0.925237] libphy: ag71xx_mdio: probed
  370. [ 1.654795] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:04 [uid=004dd074, driver=Atheros 8031 ethernet]
  371. [ 1.665431] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RGMII
  372. [ 1.672384] NET: Registered protocol family 17
  373. [ 1.676988] 8021q: 802.1Q VLAN Support v1.8
  374. [ 1.686266] UBI: auto-attach mtd6
  375. [ 1.689653] ubi0: attaching mtd6
  376. [ 3.211140] ubi0: scanning is finished
  377. [ 3.231983] ubi0: attached mtd6 (name "ubi", size 124 MiB)
  378. [ 3.237596] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  379. [ 3.244578] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
  380. [ 3.251460] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
  381. [ 3.258524] ubi0: good PEBs: 992, bad PEBs: 0, corrupted PEBs: 0
  382. [ 3.264623] ubi0: user volume: 3, internal volumes: 1, max. volumes count: 128
  383. [ 3.271947] ubi0: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1222256627
  384. [ 3.281211] ubi0: available PEBs: 0, total reserved PEBs: 992, PEBs reserved for bad PEB handling: 20
  385. [ 3.290608] ubi0: background thread "ubi_bgt0d" started, PID 303
  386. [ 3.298155] block ubiblock0_1: created from ubi0:1(rootfs)
  387. [ 3.303766] ubiblock: device ubiblock0_1 (rootfs) set to be root filesystem
  388. [ 3.321178] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
  389. [ 3.329324] Freeing unused kernel memory: 228K
  390. [ 3.333848] This architecture does not have kernel memory protection.
  391. [ 3.888493] init: Console is alive
  392. [ 3.892127] init: - watchdog -
  393. [ 4.085834] random: crng init done
  394. [ 5.318689] kmodloader: loading kernel modules from /etc/modules-boot.d/*
  395. [ 5.404134] pps_core: LinuxPPS API ver. 1 registered
  396. [ 5.409176] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  397. [ 5.420105] PTP clock support registered
  398. [ 5.434299] usbcore: registered new interface driver usbfs
  399. [ 5.439939] usbcore: registered new interface driver hub
  400. [ 5.445433] usbcore: registered new device driver usb
  401. [ 5.477722] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  402. [ 5.492002] SCSI subsystem initialized
  403. [ 5.499818] ehci-platform: EHCI generic platform driver
  404. [ 5.505235] ehci-platform ehci-platform.0: EHCI Host Controller
  405. [ 5.511269] ehci-platform ehci-platform.0: new USB bus registered, assigned bus number 1
  406. [ 5.521537] ehci-platform ehci-platform.0: TX-TX IDP fix enabled
  407. [ 5.527649] ehci-platform ehci-platform.0: irq 48, io mem 0x1b000000
  408. [ 5.562867] ehci-platform ehci-platform.0: USB 2.0 started, EHCI 1.00
  409. [ 5.570062] hub 1-0:1.0: USB hub found
  410. [ 5.574186] hub 1-0:1.0: 1 port detected
  411. [ 5.578563] ehci-platform ehci-platform.1: EHCI Host Controller
  412. [ 5.584636] ehci-platform ehci-platform.1: new USB bus registered, assigned bus number 2
  413. [ 5.594939] ehci-platform ehci-platform.1: TX-TX IDP fix enabled
  414. [ 5.601038] ehci-platform ehci-platform.1: irq 49, io mem 0x1b400000
  415. [ 5.632868] ehci-platform ehci-platform.1: USB 2.0 started, EHCI 1.00
  416. [ 5.640050] hub 2-0:1.0: USB hub found
  417. [ 5.644171] hub 2-0:1.0: 1 port detected
  418. [ 5.649093] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
  419. [ 5.666816] init: - preinit -
  420. [ 9.574907] eth0: link up (1000Mbps/Full duplex)
  421. [ 9.725254] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" started, PID 411
  422. [ 9.810679] UBIFS (ubi0:2): recovery needed
  423. [ 9.981380] UBIFS (ubi0:2): recovery completed
  424. [ 9.986009] UBIFS (ubi0:2): UBIFS: mounted UBI device 0, volume 2, name "rootfs_data"
  425. [ 9.993969] UBIFS (ubi0:2): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
  426. [ 10.004029] UBIFS (ubi0:2): FS size: 111484928 bytes (106 MiB, 878 LEBs), journal size 5586944 bytes (5 MiB, 44 LEBs)
  427. [ 10.014787] UBIFS (ubi0:2): reserved for root: 4952683 bytes (4836 KiB)
  428. [ 10.021498] UBIFS (ubi0:2): media format: w4/r0 (latest is w5/r0), UUID 3305F565-9CEE-4351-9277-BCFF54B9F2E4, small LPT model
  429. [ 10.055090] mount_root: switching to ubifs overlay
  430. [ 10.115981] urandom-seed: Seeding with /etc/urandom.seed
  431. [ 10.223797] eth0: link down
  432. [ 10.236663] procd: - early -
  433. [ 10.239670] procd: - watchdog -
  434. [ 10.888750] procd: - watchdog -
  435. [ 10.892168] procd: - ubus -
  436. [ 11.050660] procd: - init -
  437. [ 11.542250] kmodloader: loading kernel modules from /etc/modules.d/*
  438. [ 11.562104] tun: Universal TUN/TAP device driver, 1.6
  439. [ 11.586098] cryptodev: driver 1.10 loaded.
  440. [ 11.593216] i2c /dev entries driver
  441. [ 11.605624] usbcore: registered new interface driver cdc_acm
  442. [ 11.611370] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  443. [ 11.682999] usbcore: registered new interface driver cdc_wdm
  444. [ 11.690342] Loading modules backported from Linux version v5.1-rc2-0-g8c2ffd917477
  445. [ 11.698065] Backport generated by backports.git v5.1-rc2-1-0-g2fee410f
  446. [ 11.707655] hso: drivers/net/usb/hso.c: Option Wireless
  447. [ 11.713117] usbcore: registered new interface driver hso
  448. [ 11.724345] nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
  449. [ 11.896552] usbcore: registered new interface driver usbserial
  450. [ 11.902529] usbcore: registered new interface driver usbserial_generic
  451. [ 11.909270] usbserial: USB Serial support registered for generic
  452. [ 11.933229] xt_time: kernel timezone is -0000
  453. [ 11.939561] usbcore: registered new interface driver cdc_ether
  454. [ 11.948254] usbcore: registered new interface driver cdc_ncm
  455. [ 11.958295] usbcore: registered new interface driver cdc_subset
  456. [ 12.011140] usbcore: registered new interface driver ftdi_sio
  457. [ 12.017087] usbserial: USB Serial support registered for FTDI USB Serial Device
  458. [ 12.156635] usbcore: registered new interface driver huawei_cdc_ncm
  459. [ 12.171758] ip_tables: (C) 2000-2006 Netfilter Core Team
  460. [ 12.215950] PPP generic driver version 2.4.2
  461. [ 12.222482] NET: Registered protocol family 24
  462. [ 12.229282] usbcore: registered new interface driver qmi_wwan
  463. [ 12.237514] usbcore: registered new interface driver rndis_host
  464. [ 12.245622] usbcore: registered new interface driver sierra
  465. [ 12.251349] usbserial: USB Serial support registered for Sierra USB modem
  466. [ 12.260625] usbcore: registered new interface driver sierra_net
  467. [ 12.297293] pci 0000:01:00.0: using irq 41 for pin 1
  468. [ 12.302334] ath10k 4.19 driver, optimized for CT firmware, probing pci device: 0x3c.
  469. [ 12.311549] ath10k_pci 0000:01:00.0: pci irq legacy oper_irq_mode 1 irq_mode 0 reset_mode 0
  470. [ 12.589377] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/fwcfg-pci-0000:01:00.0.txt failed with error -2
  471. [ 12.600087] ath10k_pci 0000:01:00.0: Falling back to user helper
  472. [ 12.671624] firmware ath10k!fwcfg-pci-0000:01:00.0.txt: firmware_loading_store: map pages failed
  473. [ 12.680858] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:01:00.0.bin failed with error -2
  474. [ 12.691739] ath10k_pci 0000:01:00.0: Falling back to user helper
  475. [ 12.828799] firmware ath10k!pre-cal-pci-0000:01:00.0.bin: firmware_loading_store: map pages failed
  476. [ 12.843358] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/ct-firmware-5.bin failed with error -2
  477. [ 12.854528] ath10k_pci 0000:01:00.0: Falling back to user helper
  478. [ 12.987479] firmware ath10k!QCA988X!hw2.0!ct-firmware-5.bin: firmware_loading_store: map pages failed
  479. [ 12.997104] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/ct-firmware-2.bin failed with error -2
  480. [ 13.008244] ath10k_pci 0000:01:00.0: Falling back to user helper
  481. [ 13.144342] firmware ath10k!QCA988X!hw2.0!ct-firmware-2.bin: firmware_loading_store: map pages failed
  482. [ 13.153963] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-6.bin failed with error -2
  483. [ 13.164840] ath10k_pci 0000:01:00.0: Falling back to user helper
  484. [ 13.300380] firmware ath10k!QCA988X!hw2.0!firmware-6.bin: firmware_loading_store: map pages failed
  485. [ 13.309741] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-5.bin failed with error -2
  486. [ 13.320620] ath10k_pci 0000:01:00.0: Falling back to user helper
  487. [ 13.455923] firmware ath10k!QCA988X!hw2.0!firmware-5.bin: firmware_loading_store: map pages failed
  488. [ 13.465285] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-4.bin failed with error -2
  489. [ 13.476159] ath10k_pci 0000:01:00.0: Falling back to user helper
  490. [ 13.612380] firmware ath10k!QCA988X!hw2.0!firmware-4.bin: firmware_loading_store: map pages failed
  491. [ 13.621739] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-3.bin failed with error -2
  492. [ 13.632613] ath10k_pci 0000:01:00.0: Falling back to user helper
  493. [ 13.768201] firmware ath10k!QCA988X!hw2.0!firmware-3.bin: firmware_loading_store: map pages failed
  494. [ 13.781209] ath10k_pci 0000:01:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043222ff sub 19b6:d042
  495. [ 13.790604] ath10k_pci 0000:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 1 testmode 0
  496. [ 13.803046] ath10k_pci 0000:01:00.0: firmware ver 10.1-ct-8x-__fW-022-883e26a8 api 2 features wmi-10.x,has-wmi-mgmt-tx,mfp,txstatus-noack,wmi-10.x-CT,ratemask-CT,txrate-CT,get-temp-CT,tx-rc-CT,cust-stats-CT,retry-gt2-CT,txrate2-CT,beacon-cb-CT crc32 7a67ce60
  497. [ 13.908329] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/board-2.bin failed with error -2
  498. [ 13.918966] ath10k_pci 0000:01:00.0: Falling back to user helper
  499. [ 13.994485] firmware ath10k!QCA988X!hw2.0!board-2.bin: firmware_loading_store: map pages failed
  500. [ 14.014188] ath10k_pci 0000:01:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
  501. [ 14.940205] ath10k_pci 0000:01:00.0: 10.1 wmi init: vdevs: 16 peers: 127 tid: 256
  502. [ 14.958147] ath10k_pci 0000:01:00.0: wmi print 'P 128 V 8 T 410'
  503. [ 14.964472] ath10k_pci 0000:01:00.0: wmi print 'msdu-desc: 1424 sw-crypt: 0 ct-sta: 0'
  504. [ 14.972597] ath10k_pci 0000:01:00.0: wmi print 'alloc rem: 24680 iram: 26872'
  505. [ 15.044620] ath10k_pci 0000:01:00.0: htt-ver 2.1 wmi-op 2 htt-op 2 cal file max-sta 128 raw 0 hwcrypto 1
  506. [ 15.057412] ath10k_pci 0000:01:00.0: NOTE: Firmware DBGLOG output disabled in debug_mask: 0x10000000
  507. [ 15.196115] ath: EEPROM regdomain: 0x0
  508. [ 15.196121] ath: EEPROM indicates default country code should be used
  509. [ 15.196124] ath: doing EEPROM country->regdmn map search
  510. [ 15.196136] ath: country maps to regdmn code: 0x3a
  511. [ 15.196141] ath: Country alpha2 being used: US
  512. [ 15.196144] ath: Regpair used: 0x3a
  513. [ 15.310666] usbcore: registered new interface driver cdc_mbim
  514. [ 15.318699] usbcore: registered new interface driver option
  515. [ 15.324474] usbserial: USB Serial support registered for GSM modem (1-port)
  516. [ 15.336310] usbcore: registered new interface driver qcserial
  517. [ 15.342202] usbserial: USB Serial support registered for Qualcomm USB modem
  518. [ 15.407232] kmodloader: done loading kernel modules from /etc/modules.d/*
  519. [ 21.373913] br-wan: port 1(eth0) entered blocking state
  520. [ 21.379225] br-wan: port 1(eth0) entered disabled state
  521. [ 21.384768] device eth0 entered promiscuous mode
  522. [ 22.606950] MBT: Init start
  523. [ 22.609799] MBT: Init succesfull
  524. [ 22.623862] MBT: Init netlink interface - OK!
  525. [ 24.534828] eth0: link up (1000Mbps/Full duplex)
  526. [ 24.539547] br-wan: port 1(eth0) entered blocking state
  527. [ 24.544879] br-wan: port 1(eth0) entered forwarding state
  528. [ 41.111929] ath10k_pci 0000:01:00.0: 10.1 wmi init: vdevs: 16 peers: 127 tid: 256
  529. [ 41.129897] ath10k_pci 0000:01:00.0: wmi print 'P 128 V 8 T 410'
  530. [ 41.136279] ath10k_pci 0000:01:00.0: wmi print 'msdu-desc: 1424 sw-crypt: 0 ct-sta: 0'
  531. [ 41.144441] ath10k_pci 0000:01:00.0: wmi print 'alloc rem: 24680 iram: 26872'
  532. [ 41.232261] ath10k_pci 0000:01:00.0: pdev param 0 not supported by firmware
  533. [ 41.254761] A link change request failed with some changes committed already. Interface wlan0 may have been left with an inconsistent configuration, please check.
  534. [ 41.284984] ath10k_pci 0000:01:00.0: set-coverage-class, phyclk: 88 value: 27
  535. [ 42.791118] ath10k_pci 0000:01:00.0: DFS region 0x0 not supported, will trigger radar for every pulse
  536. [ 44.763208] ath10k_pci 0000:01:00.0: 10.1 wmi init: vdevs: 16 peers: 127 tid: 256
  537. [ 44.781130] ath10k_pci 0000:01:00.0: wmi print 'P 128 V 8 T 410'
  538. [ 44.787491] ath10k_pci 0000:01:00.0: wmi print 'msdu-desc: 1424 sw-crypt: 0 ct-sta: 0'
  539. [ 44.795652] ath10k_pci 0000:01:00.0: wmi print 'alloc rem: 24680 iram: 26872'
  540. [ 44.869421] ath10k_pci 0000:01:00.0: pdev param 0 not supported by firmware
  541. [ 44.889618] ------------[ cut here ]------------
  542. [ 44.894441] WARNING: CPU: 0 PID: 1584 at /mnt/ramdisk/koen/firmware/builds/generic_rb922/build_dir/target-mips_24kc_musl/linux-ar71xx_mikrotik/ath10k-ct-2019-03-25-2e917efb/ath10k-4.19/mac.c:6455 ath10k_mac_vif_beacon_free+0xc9c/0x1158 [ath10k_core]
  543. [ 44.916828] Modules linked in: mbt_netlink mbt ath9k ath9k_common qcserial pppoe ppp_async option cdc_mbim ath9k_hw ath10k_pci ath10k_core ath usb_wwan sierra_net sierra rndis_host qmi_wwan pppox ppp_generic mac80211 iptable_nat iptable_mangle iptable_filter ipt_REJECT ipt_MASQUERADE ip_tables huawei_cdc_ncm ftdi_sio cfg80211 cdc_subset cdc_ncm cdc_ether xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_FLOWOFFLOAD x_tables usbserial usbnet slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_log_common nf_flow_table_hw nf_flow_table nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack hso crc_ccitt compat cdc_wdm cdc_acm i2c_dev ledtrig_usbport cryptodev msdos dummy
  544. [ 44.988429] tun vfat fat nls_utf8 nls_iso8859_1 nls_cp437 authenc ehci_platform sd_mod scsi_mod ehci_hcd gpio_button_hotplug ext4 mbcache jbd2 usbcore nls_base usb_common ptp pps_core mii aead crypto_null cryptomgr crc32c_generic crypto_hash
  545. [ 45.010263] CPU: 0 PID: 1584 Comm: wpa_supplicant Not tainted 4.14.111 #0
  546. [ 45.017152] Stack : 80500000 804be408 00000000 00000000 80493300 85ee5a2c 87d1745c 804e5307
  547. [ 45.025643] 8048f4d8 00000630 805437d0 00001937 87d26d50 00000001 85ee59e0 ecbaeb90
  548. [ 45.034134] 00000000 00000000 80540000 00006440 00000000 00000000 00000007 00000000
  549. [ 45.042619] 00000119 fab5a2e4 00000118 00000000 80000000 00000000 87152784 8710cc70
  550. [ 45.051110] 00000009 00001937 87d26d50 876ed000 00000000 802a27b4 00000000 80540000
  551. [ 45.059602] ...
  552. [ 45.062085] Call Trace:
  553. [ 45.064575] [<8006c6ec>] show_stack+0x58/0x100
  554. [ 45.069084] [<80086d50>] __warn+0xe4/0x118
  555. [ 45.073254] [<80086e14>] warn_slowpath_null+0x1c/0x28
  556. [ 45.078417] [<8710cc70>] ath10k_mac_vif_beacon_free+0xc9c/0x1158 [ath10k_core]
  557. [ 45.085766] ---[ end trace 7eb82a01ee2ce39d ]---
  558. [ 47.172853] wlan0: Trigger new scan to find an IBSS to join
  559. [ 47.277900] wlan0: Trigger new scan to find an IBSS to join
  560. [ 47.283842] wlan0: Trigger new scan to find an IBSS to join
  561. [ 47.321996] wlan0: Trigger new scan to find an IBSS to join
  562. [ 47.688468] wlan0: Trigger new scan to find an IBSS to join
  563. [ 47.717464] wlan0: Trigger new scan to find an IBSS to join
  564. [ 48.219630] wlan0: Trigger new scan to find an IBSS to join
  565. [ 51.172845] wlan0: Trigger new scan to find an IBSS to join
  566. [ 51.271386] wlan0: Trigger new scan to find an IBSS to join
  567. [ 51.277309] wlan0: Trigger new scan to find an IBSS to join
  568. [ 51.315533] wlan0: Trigger new scan to find an IBSS to join
  569. [ 51.720401] wlan0: Trigger new scan to find an IBSS to join
  570. [ 52.430217] wlan0: Creating new IBSS network, BSSID fe:73:7c:51:b3:77
  571. [ 175.252836] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
  572. [ 175.627865] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
  573. [ 176.845522] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
  574. [ 176.861156] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
  575. [ 177.801751] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
  576. [ 177.811492] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
  577. [ 199.238164] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  578. [ 199.245634] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  579. [ 199.253077] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  580. [ 199.260498] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  581. [ 199.267935] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  582. [ 199.276834] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  583. [ 199.284309] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  584. [ 199.291729] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  585. [ 199.299169] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  586. [ 199.306610] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  587. [ 199.314047] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  588. [ 199.321463] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  589. [ 199.328901] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  590. [ 199.336335] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  591. [ 199.343771] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  592. [ 199.351190] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  593. [ 199.358628] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  594. [ 199.366062] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  595. [ 199.373498] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  596. [ 199.380915] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  597. [ 199.388354] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  598. [ 199.395789] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  599. [ 199.403224] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  600. [ 199.410643] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  601. [ 199.418080] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  602. [ 199.425514] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  603. [ 199.432947] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  604. [ 199.440367] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  605. [ 199.447807] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  606. [ 199.455247] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  607. [ 199.462668] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  608. [ 199.580302] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  609. [ 199.587952] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  610. [ 199.595430] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  611. [ 199.602887] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  612. [ 199.610306] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  613. [ 199.617745] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  614. [ 199.625176] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  615. [ 199.632596] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  616. [ 199.640030] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  617. [ 199.647466] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  618. [ 199.654901] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  619. [ 199.662322] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  620. [ 199.669757] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  621. [ 199.677198] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  622. [ 199.684629] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  623. [ 199.692048] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  624. [ 199.699483] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  625. [ 199.706919] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  626. [ 199.714355] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  627. [ 199.721775] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  628. [ 199.729211] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  629. [ 199.736644] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  630. [ 199.744087] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  631. [ 199.751501] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  632. [ 199.758936] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  633. [ 199.766371] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  634. [ 199.773807] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  635. [ 199.781228] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  636. [ 199.788662] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  637. [ 199.796098] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  638. [ 199.803533] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  639. [ 199.951804] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  640. [ 199.959394] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  641. [ 199.966859] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  642. [ 199.974310] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  643. [ 199.981727] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  644. [ 199.989165] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  645. [ 199.996597] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  646. [ 200.004033] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  647. [ 200.011453] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  648. [ 200.018888] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  649. [ 200.026332] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  650. [ 200.033769] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  651. [ 200.041187] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  652. [ 200.048624] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  653. [ 200.056059] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  654. [ 200.063494] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  655. [ 200.070915] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  656. [ 200.078350] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  657. [ 200.085786] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  658. [ 200.093222] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  659. [ 200.100641] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  660. [ 200.108076] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  661. [ 200.115512] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  662. [ 200.122943] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  663. [ 200.130359] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  664. [ 200.137794] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  665. [ 200.145230] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  666. [ 200.152649] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  667. [ 200.160084] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  668. [ 200.167520] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  669. [ 200.174956] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  670. [ 200.188045] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  671. [ 200.195519] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  672. [ 200.202966] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  673. [ 200.210386] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  674. [ 200.217823] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  675. [ 200.225258] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  676. [ 200.232676] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  677. [ 200.240112] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  678. [ 200.247548] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  679. [ 200.254984] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  680. [ 200.262403] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  681. [ 200.269837] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  682. [ 200.277275] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  683. [ 200.284711] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  684. [ 200.292129] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  685. [ 200.299567] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  686. [ 200.307002] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  687. [ 200.314438] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  688. [ 200.321856] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  689. [ 200.329292] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  690. [ 200.336727] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  691. [ 200.344162] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  692. [ 200.351581] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  693. [ 200.359016] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  694. [ 200.366453] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  695. [ 200.373888] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  696. [ 200.381309] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  697. [ 200.388744] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  698. [ 200.396180] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  699. [ 200.403617] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  700. [ 200.411035] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  701. [ 200.418474] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  702. [ 200.425906] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  703. [ 200.433341] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  704. [ 200.440761] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  705. [ 200.448205] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  706. [ 200.455643] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  707. [ 200.463076] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  708. [ 200.480469] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  709. [ 200.487940] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  710. [ 200.495382] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  711. [ 200.502805] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  712. [ 200.510240] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  713. [ 200.517672] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  714. [ 200.525108] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  715. [ 200.532529] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  716. [ 200.539963] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  717. [ 200.547398] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  718. [ 200.554835] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  719. [ 200.562254] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  720. [ 200.569691] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  721. [ 200.577125] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  722. [ 200.584560] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  723. [ 200.591981] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  724. [ 200.599415] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  725. [ 200.606854] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  726. [ 200.614289] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  727. [ 200.621706] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  728. [ 200.629147] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  729. [ 200.636579] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  730. [ 200.644020] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  731. [ 200.651434] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  732. [ 200.658868] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  733. [ 200.666302] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  734. [ 200.673739] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  735. [ 200.681159] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  736. [ 200.688596] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  737. [ 200.696029] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  738. [ 200.703466] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  739. [ 200.710889] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  740. [ 200.718323] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  741. [ 200.725756] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  742. [ 200.733193] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  743. [ 200.740613] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  744. [ 200.748048] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
  745. [ 200.755483] ^C
  746. [ Node 10 | node-10 ] ^C
RAW Paste Data
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!