API tools faq
paste
B1gtuna

Ash's Precise LiveBuild different Sd card reader

B1gtuna
Jul 3rd, 2012
108
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 18.67 KB | None | 0 0
raw download clone embed print report
  1. �tصb�$U
  2. � � �D��` @ �
  3. U-Boot SPL 2012.04.01 (May 18 2012 - 00:29:51)
  4. OMAP SD/MMC: 0
  5. reading u-boot.img
  6. reading u-boot.img
  7.  
  8.  
  9. U-Boot 2012.04.01 (May 18 2012 - 00:29:51)
  10.  
  11. OMAP3530-GP ES3.1, CPU-OPP2, L3-165MHz, Max CPU Clock 600 mHz
  12. Gumstix Overo board + LPDDR/NAND
  13. I2C: ready
  14. DRAM: 256 MiB
  15. NAND: 256 MiB
  16. MMC: OMAP SD/MMC: 0
  17. *** Warning - bad CRC, using default environment
  18.  
  19. In: serial
  20. Out: serial
  21. Err: serial
  22. Board revision: 0
  23. Tranceiver detected on mmc2
  24. No EEPROM on expansion board
  25. Die ID #1d0400040000000004035c140200a008
  26. Net: smc911x-0
  27. Hit any key to stop autoboot: 0
  28. reading boot.scr
  29.  
  30. 518 bytes read
  31. Running bootscript from mmc ...
  32. ## Executing script at 82000000
  33. reading uImage
  34.  
  35. 4064296 bytes read
  36. reading uInitrd
  37.  
  38. 1434837 bytes read
  39. reading board.dtb
  40.  
  41. 312 bytes read
  42. ## Booting kernel from Legacy Image at 80000000 ...
  43. Image Name: Linux
  44. Image Type: ARM Linux Kernel Image (uncompressed)
  45. Data Size: 4064232 Bytes = 3.9 MiB
  46. Load Address: 80008000
  47. Entry Point: 80008000
  48. Verifying Checksum ... OK
  49. ## Loading init Ramdisk from Legacy Image at 81600000 ...
  50. Image Name: initramfs
  51. Image Type: ARM Linux RAMDisk Image (uncompressed)
  52. Data Size: 1434773 Bytes = 1.4 MiB
  53. Load Address: 00000000
  54. Entry Point: 00000000
  55. Verifying Checksum ... OK
  56. ## Flattened Device Tree blob at 815f0000
  57. Booting using the fdt blob at 0x815f0000
  58. Loading Kernel Image ... OK
  59. OK
  60. Using Device Tree in place at 815f0000, end 815f3137
  61.  
  62. Starting kernel ...
  63.  
  64. Uncompressing Linux... done, booting the kernel.
  65. [ 0.000000] Initializing cgroup subsys cpuset
  66. [ 0.000000] Linux version 3.1.1-15-linaro-omap (adam@adam-Gumstix) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #15 SMP PREEMPT Thu Jun 21 14:13:33 PDT 2012 (Ubuntu 3.1.1-15.15-linaro-omap 3.1.1)
  67. [ 0.000000] CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=50c5387d
  68. [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
  69. [ 0.000000] Machine: Gumstix Overo, model: Gumstix Overo
  70. [ 0.000000] bootconsole [earlycon0] enabled
  71. [ 0.000000] Reserving 12582912 bytes SDRAM for VRAM
  72. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  73. [ 0.000000] OMAP3430/3530 ES3.1 (l2cache iva sgx neon isp )
  74. [ 0.000000] SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x10000
  75. [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz
  76. [ 0.000000] Reprogramming SDRC clock to 332000000 Hz
  77. [ 0.000000] PERCPU: Embedded 8 pages/cpu @80e7d000 s10560 r8192 d14016 u32768
  78. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 61952
  79. [ 0.000000] Kernel command line: console=tty0 console=ttyO2,115200n8 root=UUID=1467d9e9-a389-4d96-9102-2d54031ddccb rootwait ro earlyprintk mpurate=500 vram=12M omapdss.def_disp=dvi omapfb.mode=dvi:1024x768MR-16@60
  80. [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
  81. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  82. [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  83. [ 0.000000] Memory: 244MB = 244MB total
  84. [ 0.000000] Memory: 233364k/233364k available, 28780k reserved, 0K highmem
  85. [ 0.000000] Virtual kernel memory layout:
  86. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  87. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  88. [ 0.000000] vmalloc : 0x90800000 - 0xf8000000 (1656 MB)
  89. [ 0.000000] lowmem : 0x80000000 - 0x90000000 ( 256 MB)
  90. [ 0.000000] pkmap : 0x7fe00000 - 0x80000000 ( 2 MB)
  91. [ 0.000000] modules : 0x7f800000 - 0x7fe00000 ( 6 MB)
  92. [ 0.000000] .text : 0x80008000 - 0x8061d080 (6229 kB)
  93. [ 0.000000] .init : 0x8061e000 - 0x80673940 ( 343 kB)
  94. [ 0.000000] .data : 0x80674000 - 0x806fe040 ( 553 kB)
  95. [ 0.000000] .bss : 0x806fe064 - 0x80c76a88 (5603 kB)
  96. [ 0.000000] Preemptible hierarchical RCU implementation.
  97. [ 0.000000] NR_IRQS:410
  98. [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
  99. [ 0.000000] Total of 96 interrupts on 1 active controller
  100. [ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
  101. [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
  102. [ 0.000000] Console: colour dummy device 80x30
  103. [ 0.000000] console [tty0] enabled
  104. [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
  105. [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
  106. [ 0.000000] ... MAX_LOCK_DEPTH: 48
  107. [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
  108. [ 0.000000] ... CLASSHASH_SIZE: 4096
  109. [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
  110. [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
  111. [ 0.000000] ... CHAINHASH_SIZE: 16384
  112. [ 0.000000] memory used by lock dependency info: 3695 kB
  113. [ 0.000000] per task-struct memory footprint: 1152 bytes
  114. [ 0.066284] Calibrating delay loop... 396.99 BogoMIPS (lpj=1548288)
  115. [ 0.129730] pid_max: default: 32768 minimum: 301
  116. [ 0.135589] Security Framework initialized
  117. [ 0.140075] AppArmor: AppArmor initialized
  118. [ 0.144500] Yama: becoming mindful.
  119. [ 0.148651] Mount-cache hash table entries: 512
  120. [ 0.161499] CPU: Testing write buffer coherency: ok
  121. [ 0.167175] ftrace: allocating 25310 entries in 50 pages
  122. [ 0.265502] CPU0: thread -1, cpu 0, socket -1, mpidr 0
  123. [ 0.271026] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
  124. [ 0.322662] Brought up 1 CPUs
  125. [ 0.325836] SMP: Total of 1 processors activated (396.99 BogoMIPS).
  126. [ 0.337341] devtmpfs: initialized
  127. [ 0.357421] omap_hwmod: am35x_otg_hs: cannot be enabled (3)
  128. [ 0.372711] print_constraints: dummy:
  129. [ 0.379730] NET: Registered protocol family 16
  130. [ 0.386016] GPMC revision 5.0
  131. [ 0.400726] omap_device: omap_gpio.0: new worst case activate latency 0: 91552
  132. [ 0.411865] OMAP GPIO hardware version 2.5
  133. [ 0.435882] omap_mux_init: Add partition: #1: core, flags: 0
  134. [ 0.454498] omap_device: omap_uart.0: new worst case activate latency 0: 30517
  135. [ 0.455169] omap_device: omap_uart.0: new worst case deactivate latency 0: 30517
  136. [ 0.474792] Found NAND on CS0
  137. [ 0.477966] Registering NAND on CS0
  138. [ 0.503356] No ATAGs?
  139. [ 0.505554] hw-breakpoint: debug architecture 0x4 unsupported.
  140. [ 0.527099] omap_device: omap-mcbsp.2: alias fck already exists
  141. [ 0.534790] omap_device: omap-mcbsp.3: alias fck already exists
  142. [ 0.546630] Calibrating delay loop (skipped) already calibrated this CPU
  143. [ 0.554016] Switched to new clocking rate (Crystal/Core/MPU): 26.0/332/500 MHz
  144. [ 0.563873] OMAP DMA hardware revision 4.0
  145. [ 0.571166] Serial: AMBA PL011 UART driver
  146. [ 0.708404] bio: create slab <bio-0> at 0
  147. [ 0.718536] print_constraints: vads7846: 3300 mV
  148. [ 0.733306] SCSI subsystem initialized
  149. [ 0.741394] omap_device: omap2_mcspi.1: new worst case activate latency 0: 30517
  150. [ 0.755920] omap_device: omap2_mcspi.2: new worst case deactivate latency 0: 30517
  151. [ 0.773040] usbcore: registered new interface driver usbfs
  152. [ 0.780761] usbcore: registered new interface driver hub
  153. [ 0.787841] usbcore: registered new device driver usb
  154. [ 0.802581] omap_device: omap_i2c.1: new worst case activate latency 0: 30517
  155. [ 0.822845] omap_i2c omap_i2c.1: bus 1 rev3.12 at 2600 kHz
  156. [ 0.843597] twl4030: PIH (irq 7) chaining IRQs 368..375
  157. [ 0.849761] twl4030: power (irq 373) chaining IRQs 376..383
  158. [ 0.858367] twl4030: gpio (irq 368) chaining IRQs 384..401
  159. [ 0.876586] print_constraints: VUSB1V5: 1500 mV normal standby
  160. [ 0.886535] print_constraints: VUSB1V8: 1800 mV normal standby
  161. [ 0.896087] print_constraints: VUSB3V1: 3100 mV normal standby
  162. [ 0.911987] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
  163. [ 0.925994] print_constraints: VMMC1: 1850 <--> 3150 mV at 3150 mV normal standby
  164. [ 0.937377] print_constraints: VDAC: 1800 mV normal standby
  165. [ 0.946777] print_constraints: VDVI: 1800 mV normal standby
  166. [ 0.953826] omap_device: omap_i2c.1: new worst case deactivate latency 0: 30517
  167. [ 0.970794] omap_i2c omap_i2c.3: bus 3 rev3.12 at 400 kHz
  168. [ 0.990936] NetLabel: Initializing
  169. [ 0.995208] NetLabel: domain hash size = 128
  170. [ 0.999816] NetLabel: protocols = UNLABELED CIPSOv4
  171. [ 1.005737] NetLabel: unlabeled traffic allowed by default
  172. [ 1.011901] Switching to clocksource 32k_counter
  173. [ 1.017822] Switched to NOHz mode on CPU #0
  174. [ 1.148071] AppArmor: AppArmor Filesystem Enabled
  175. [ 1.266937] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
  176. [ 1.274047] omap_device: musb-omap2430.-1: new worst case activate latency 0: 30517
  177. [ 1.283416] omap_device: omap_i2c.1: new worst case activate latency 0: 122070
  178. [ 1.302490] musb-hdrc musb-hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92
  179. [ 1.313476] NET: Registered protocol family 2
  180. [ 1.319519] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
  181. [ 1.332489] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  182. [ 1.341400] omap_device: musb-omap2430.-1: new worst case deactivate latency 0: 91552
  183. [ 1.350402] TCP bind hash table entries: 8192 (order: 6, 327680 bytes)
  184. [ 1.364257] TCP: Hash tables configured (established 8192 bind 8192)
  185. [ 1.371154] TCP reno registered
  186. [ 1.374542] UDP hash table entries: 128 (order: 1, 12288 bytes)
  187. [ 1.381317] UDP-Lite hash table entries: 128 (order: 1, 12288 bytes)
  188. [ 1.389678] NET: Registered protocol family 1
  189. [ 1.396728] RPC: Registered named UNIX socket transport module.
  190. [ 1.403137] RPC: Registered udp transport module.
  191. [ 1.408203] RPC: Registered tcp transport module.
  192. [ 1.413208] RPC: Registered tcp NFSv4.1 backchannel transport module.
  193. [ 1.422088] Trying to unpack rootfs image as initramfs...
  194. [ 1.653533] Freeing initrd memory: 1400K
  195. [ 1.686920] audit: initializing netlink socket (disabled)
  196. [ 1.693359] type=2000 audit(1.609:1): initialized
  197. [ 1.925964] Kprobe smoke test started
  198. [ 1.943511] Kprobe smoke test failed: register_jprobe returned -22
  199. [ 1.950164] Kprobe smoke test failed: register_jprobes returned -22
  200. [ 1.969573] BUG: Kprobe smoke test: 2 out of 6 tests failed
  201. [ 1.998748] JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
  202. [ 2.010894] Btrfs loaded
  203. [ 2.013732] msgmni has been set to 458
  204. [ 2.026794] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  205. [ 2.035217] io scheduler noop registered
  206. [ 2.039398] io scheduler deadline registered
  207. [ 2.044342] io scheduler cfq registered (default)
  208. [ 2.056213] omap_device: omapdss_dss.-1: new worst case activate latency 0: 61035
  209. [ 2.064605] OMAP DSS rev 2.0
  210. [ 2.067810] omap_device: omapdss_dss.-1: new worst case deactivate latency 0: 30517
  211. [ 2.097656] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  212. [ 2.167541] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0
  213. [ 2.189605] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1
  214. [ 2.212951] omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2
  215. [ 2.220733] console [ttyO2] enabled, bootconsole disabled
  216. [ 2.220733] console [ttyO2] enabled, bootconsole disabled
  217. [ 2.246307] [drm] Initialized drm 1.1.0 20060810
  218. [ 2.307189] brd: module loaded
  219. [ 2.345001] loop: module loaded
  220. [ 2.362060] mtdoops: mtd device (mtddev=name/number) must be supplied
  221. [ 2.370056] omap2-nand driver initializing
  222. [ 2.375122] ONFI flash detected
  223. [ 2.378875] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xba (Micron NAND 256MiB 1,8V 16-bit)
  224. [ 2.388305] Creating 5 MTD partitions on "omap2-nand.0":
  225. [ 2.394012] 0x000000000000-0x000000080000 : "xloader"
  226. [ 2.412109] 0x000000080000-0x000000240000 : "uboot"
  227. [ 2.426483] 0x000000240000-0x000000280000 : "uboot environment"
  228. [ 2.441162] 0x000000280000-0x000000680000 : "linux"
  229. [ 2.456634] 0x000000680000-0x000010000000 : "rootfs"
  230. [ 2.611267] OneNAND driver initializing
  231. [ 2.626556] smsc911x: Driver version 2008-10-21
  232. [ 2.661804] smsc911x-mdio: probed
  233. [ 2.666534] smsc911x smsc911x.0: eth0: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=0:01, irq=-1)
  234. [ 2.678253] smsc911x smsc911x.0: eth0: MAC Address: 00:15:c9:28:de:5d
  235. [ 2.685302] smsc911x: Driver version 2008-10-21
  236. [ 2.692565] usbcore: registered new interface driver asix
  237. [ 2.699401] usbcore: registered new interface driver cdc_ether
  238. [ 2.706726] usbcore: registered new interface driver smsc95xx
  239. [ 2.713806] usbcore: registered new interface driver net1080
  240. [ 2.720947] usbcore: registered new interface driver cdc_subset
  241. [ 2.727935] usbcore: registered new interface driver zaurus
  242. [ 2.734222] cdc_ncm: 04-Aug-2011
  243. [ 2.738555] usbcore: registered new interface driver cdc_ncm
  244. [ 2.747711] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  245. [ 3.759704] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
  246. [ 3.770812] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
  247. [ 3.779754] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
  248. [ 3.798828] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
  249. [ 3.806823] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  250. [ 3.814025] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  251. [ 3.821777] usb usb1: Product: OMAP-EHCI Host Controller
  252. [ 3.827484] usb usb1: Manufacturer: Linux 3.1.1-15-linaro-omap ehci_hcd
  253. [ 3.834564] usb usb1: SerialNumber: ehci-omap.0
  254. [ 3.848419] hub 1-0:1.0: USB hub found
  255. [ 3.852691] hub 1-0:1.0: 3 ports detected
  256. [ 3.893249] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  257. [ 3.900634] ohci-omap3 ohci-omap3.0: OMAP3 OHCI Host Controller
  258. [ 3.909027] ohci-omap3 ohci-omap3.0: new USB bus registered, assigned bus number 2
  259. [ 3.918029] ohci-omap3 ohci-omap3.0: irq 76, io mem 0x48064400
  260. [ 4.011566] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  261. [ 4.018829] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  262. [ 4.026580] usb usb2: Product: OMAP3 OHCI Host Controller
  263. [ 4.032287] usb usb2: Manufacturer: Linux 3.1.1-15-linaro-omap ohci_hcd
  264. [ 4.039367] usb usb2: SerialNumber: ohci-omap3.0
  265. [ 4.048767] hub 2-0:1.0: USB hub found
  266. [ 4.052825] hub 2-0:1.0: 3 ports detected
  267. [ 4.062011] usbcore: registered new interface driver cdc_wdm
  268. [ 4.068298] Initializing USB Mass Storage driver...
  269. [ 4.074676] usbcore: registered new interface driver usb-storage
  270. [ 4.081909] USB Mass Storage support registered.
  271. [ 4.089111] usbcore: registered new interface driver libusual
  272. [ 4.097381] usbcore: registered new interface driver usbserial
  273. [ 4.105621] USB Serial support registered for generic
  274. [ 4.112487] usbcore: registered new interface driver usbserial_generic
  275. [ 4.119720] usbserial: USB Serial Driver core
  276. [ 4.125274] usbcore: registered new interface driver usbtest
  277. [ 4.140319] input: twl4030_pwrbutton as /devices/platform/omap/omap_i2c.1/i2c-1/1-0049/twl4030_pwrbutton/input/input0
  278. [ 4.160217] twl_rtc twl_rtc: Power up reset detected.
  279. [ 4.171783] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
  280. [ 4.181274] i2c /dev entries driver
  281. [ 4.191680] Driver for 1-wire Dallas network protocol.
  282. [ 4.200378] omap_device: omap_wdt.-1: new worst case activate latency 0: 30517
  283. [ 4.211181] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
  284. [ 4.218078] omap_device: omap_wdt.-1: new worst case deactivate latency 0: 30517
  285. [ 4.227508] twl4030_wdt twl4030_wdt: Failed to register misc device
  286. [ 4.234558] twl4030_wdt: probe of twl4030_wdt failed with error -16
  287. [ 4.245117] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: [email protected]
  288. [ 4.260925] omap_device: omap_hsmmc.0: new worst case activate latency 0: 244140
  289. [ 4.417297] usbcore: registered new interface driver usbhid
  290. [ 4.423217] usbhid: USB HID core driver
  291. [ 4.430450] oprofile: using arm/armv7
  292. [ 4.435943] TCP cubic registered
  293. [ 4.440582] NET: Registered protocol family 10
  294. [ 4.450714] NET: Registered protocol family 17
  295. [ 4.456054] NET: Registered protocol family 15
  296. [ 4.461364] Registering the dns_resolver key type
  297. [ 4.467376] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
  298. [ 4.475830] ThumbEE CPU extension supported.
  299. [ 4.480499] Registering SWP/SWPB emulation handler
  300. [ 4.540130] omap_device: omap_i2c.1: new worst case deactivate latency 0: 61035
  301. [ 4.573394] omap_device: omap_i2c.1: new worst case deactivate latency 0: 91552
  302. [ 4.587432] clock: disabling unused clocks to save power
  303. [ 4.600952] fbcvt: 1024x768@60: CVT Name - .786M3-R
  304. [ 4.629913] omap_device: omapdss_dispc.-1: new worst case activate latency 0: 152587
  305. [ 4.644622] Console: switching to colour frame buffer device 128x48
  306. [ 4.684722] regulator_init_complete: VDAC: incomplete constraints, leaving on
  307. [ 4.693664] regulator_init_complete: vads7846: incomplete constraints, leaving on
  308. [ 4.707733] input: gpio-keys as /devices/platform/gpio-keys/input/input1
  309. [ 4.720123] twl_rtc twl_rtc: setting system clock to 2000-01-01 00:00:12 UTC (946684812)
  310. [ 4.735656] Freeing init memory: 340K
  311. Loading, please wait...
  312. [ 5.081420] omap_device: omap_i2c.1: new worst case deactivate latency 0: 122070
  313. [ 5.130615] udevd[712]: starting version 175
  314. Begin: Loading essential drivers ... done.
  315. Begin: Running /scripts/init-premount ... done.
  316. Begin: Mounting root file system ... [ 5.324066] mmc0: host does not support reading read-only switch. assuming write-enable.
  317. Begin: Running /scripts/local-top ... done.
  318. [ 5.398559] mmc0: new high speed SDHC card at address 1234
  319. [ 5.487335] mmcblk0: mmc0:1234 SA04G 3.69 GiB
  320. [ 5.593688] omap_device: omap_hsmmc.0: new worst case deactivate latency 0: 30517
  321. [ 5.658142] mmcblk0: p1 p2
  322. [ 5.843414] omap_device: omap_hsmmc.0: new worst case activate latency 0: 335693
  323. [ 6.343841] mmc1: new SDIO card at address 0001
  324. [ 6.845642] omap_device: omap_i2c.1: new worst case activate latency 0: 213623
  325. [ 6.890563] omap_device: omap_i2c.1: new worst case deactivate latency 0: 701904
  326. Begin: Running /scripts/local-premount ... done.
  327. [ 7.676208] EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode
  328. [ 7.689697] kjournald starting. Commit interval 5 seconds
  329. Begin: Running /scripts/local-bottom ... done.
  330. done.
  331. Begin: Running /scripts/init-bottom ... done.
  332. fsck from util-linux 2.20.1
  333. rootfs: clean, 13119/239040 files, 116764/954880 blocks
  334. udevd[873]: '/sbin/blkid -o udev -p /dev/mmcblk0' [893] terminated by signal 4 (Illegal instruction)
  335.  
  336. * Using makefile-style concurrent boot in runlevel S
  337. * Using makefile-style concurrent boot in runlevel 2
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!