Format: Log Type - Time(microsec) - Message - Optional Info
Log Type: B - Since Boot(Power On Reset),  D - Delta,  S - Statistic
S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.3.1.1-00066
S - IMAGE_VARIANT_STRING=MAACANAZA
S - OEM_IMAGE_VERSION_STRING=CRM
S - Boot Config, 0x000002c5
B -       126 - PBL, Start
B -      1557 - bootable_media_detect_entry, Start
B -      3333 - bootable_media_detect_success, Start
B -      3337 - elf_loader_entry, Start
B -      8480 - auth_hash_seg_entry, Start
B -      8839 - auth_hash_seg_exit, Start
B -     99875 - elf_segs_hash_verify_entry, Start
B -    169441 - PBL, End
B -    139415 - SBL1, Start
B -    200781 - GCC [RstStat:0x0, RstDbg:0x600000] WDog Stat : 0x4
B -    208925 - clock_init, Start
D -      7289 - clock_init, Delta
B -    216367 - boot_flash_init, Start
D -     14945 - boot_flash_init, Delta
B -    231373 - boot_config_data_table_init, Start
D -      4666 - boot_config_data_table_init, Delta - (575 Bytes)
B -    239120 - Boot Setting :  0x00000618
B -    245494 - CDT version:2,Platform ID:8,Major ID:4,Minor ID:0,Subtype:1
B -    252204 - sbl1_ddr_set_params, Start
B -    253638 - Pre_DDR_clock_init, Start
B -    259494 - Pre_DDR_clock_init, End
B -    901702 - do ddr sanity test, Start
D -        61 - do ddr sanity test, Delta
B -    906368 - Image Load, Start
D -    242872 - QSEE Image Loaded, Delta - (578956 Bytes)
B -   1150094 - Image Load, Start
D -     13877 - DEVCFG Image Loaded, Delta - (13592 Bytes)
B -   1164002 - Image Load, Start
D -    196023 - APPSBL Image Loaded, Delta - (470282 Bytes)
B -   1360086 - QSEE Execution, Start
D -        61 - QSEE Execution, Delta
B -   1366552 - SBL1, End
D -   1229791 - SBL1, Delta
S - Flash Throughput, 2457 KB/s  (1064077 Bytes,  433061 us)
S - DDR Frequency, 800 MHz
S - Core 0 Frequency, 800 MHz




U-Boot 2016.01 (Mar 19 2025 - 18:39:12 +0800)



DRAM:  smem ram ptable found: ver: 1 len: 4

512 MiB

NAND:  QPIC controller support serial NAND

ID = <---censored Flash ID --->

Vendor = c8

Device = 11

Serial Nand Device Found With ID : 0xc8 0x11

Serial NAND device Manufacturer:F50D1G41LB(2M)

Device Size:128 MiB, Page size:2048, Spare Size:64, ECC:4-bit

SF: Unsupported flash IDs: manuf 00, jedec 0000, ext_jedec 0000

ipq_spi: SPI Flash not found (bus/cs/speed/mode) = (0/0/48000000/0)

128 MiB

MMC:   sdhci: Node Not found, skipping initialization



PCI Link Intialized

PCI1 is not defined in the device tree

In:    serial@78AF000

Out:   serial@78AF000

Err:   serial@78AF000

machid: <---censored router machine ID --->

Reset button GPIO: 22

Web LED GPIO: 1

###### PULL UP GPIO31 for MODEM POWER UP

Hit any key to stop autoboot:  5  4  3  2  1  0

ubi0: attaching mtd1

ubi0: scanning is finished

ubi0: attached mtd1 (name „mtd=0”, size 58 MiB)

ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes

ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048

ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096

ubi0: good PEBs: 464, bad PEBs: 0, corrupted PEBs: 0

ubi0: user volume: 3, internal volumes: 1, max. volumes count: 128

ubi0: max/mean erase counter: 111/24, WL threshold: 4096, image sequence number: 1014258347

ubi0: available PEBs: 0, total reserved PEBs: 464, PEBs reserved for bad PEB handling: 20

Read 0 bytes from volume kernel to 44000000

No size specified -> Using max size (4952064)

## Loading kernel from FIT Image at 44000000 …

   Using ‚[email protected]’ configuration

   Trying ‚kernel@1’ kernel subimage

     Description:  ARM64 OpenWrt Linux-5.4.213

     Type:         Kernel Image

     Compression:  gzip compressed

     Data Start:   0x440000e8

     Data Size:    4829324 Bytes = 4.6 MiB

     Architecture: AArch64

     OS:           Linux

     Load Address: 0x41080000

     Entry Point:  0x41080000

     Hash algo:    crc32

     Hash value:   98e0a012

     Hash algo:    sha1

     Hash value:   3ec53903b8e5a74770f1b1109e244d28db895126

   Verifying Hash Integrity … crc32+ sha1+ OK

## Loading fdt from FIT Image at 44000000 …

   Using ‚[email protected]’ configuration

   Trying ‚fdt@1’ fdt subimage

     Description:  ARM64 OpenWrt brax_fa532 device tree blob

     Type:         Flat Device Tree

     Compression:  uncompressed

     Data Start:   0x4449b2b0

     Data Size:    45055 Bytes = 44 KiB

     Architecture: AArch64

     Hash algo:    crc32

     Hash value:   0672e5f1

     Hash algo:    sha1

     Hash value:   68c6c31919b811771705d1d9c9a83ffbea18c485

   Verifying Hash Integrity … crc32+ sha1+ OK

   Booting using the fdt blob at 0x4449b2b0

   Uncompressing Kernel Image … OK

   Loading Device Tree to 4a3f2000, end 4a3ffffe … OK

Could not find PCI in device tree

Using machid <---censored router machine ID ---> from environment



Starting kernel …



Jumping to AARCH64 kernel via monitor

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x51af8014]
[    0.000000] Linux version 5.4.213 (lingjp@lingjp) (gcc version 12.3.0 (OpenWrt GCC 12.3.0 r0-db4361aef)) #0 SMP PREEMPT Sun Dec 15 07:22:42 2024
[    0.000000] Machine model: D50 5G
[    0.000000] Reserved memory: created DMA memory pool at 0x0000000050000000, size 5 MiB
[    0.000000] OF: reserved mem: initialized node dma_pool1@50000000, compatible id shared-dma-pool
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.0
[    0.000000] psci: OSI mode supported.
[    0.000000] percpu: Embedded 24 pages/cpu s59800 r8192 d30312 u98304
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[    0.000000] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 102060
[    0.000000] Kernel command line: xu_whitelabel=XU xu_hwlbl=R5Q-D50-1G-DB4-EM console=ttyMSM0,115200n8 ubi.mtd=rootfs root=mtd:ubi_rootfs rootfstype=squashfs rootwait root=/dev/ubiblock0_1 swiotlb=1 coherent_pool=2M
[    0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 385852K/414720K available (7550K kernel code, 540K rwdata, 2084K rodata, 576K init, 417K bss, 28868K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv2m: range[mem 0x0b00a000-0x0b00affc], SPI[448:479]
[    0.000000] GICv2m: range[mem 0x0b00b000-0x0b00bffc], SPI[480:511]
[    0.000000] arch_timer: cp15 and mmio timer(s) running at 24.00MHz (virt/virt).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.000371] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[    0.000387] pid_max: default: 32768 minimum: 301
[    0.000558] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.000573] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.003042] ASID allocator initialised with 65536 entries
[    0.003244] rcu: Hierarchical SRCU implementation.
[    0.005632] smp: Bringing up secondary CPUs …
[    0.006688] Detected VIPT I-cache on CPU1
[    0.006751] CPU1: Booted secondary processor 0x0000000001 [0x51af8014]
[    0.006924] smp: Brought up 1 node, 2 CPUs
[    0.006944] SMP: Total of 2 processors activated.
[    0.006954] CPU features: detected: 32-bit EL0 Support
[    0.006962] CPU features: detected: CRC32 instructions
[    0.007021] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
[    0.007035] CPU: All CPU(s) started at EL1
[    0.007354] alternatives: patching kernel code
[    0.019212] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.019239] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[    0.019412] pinctrl core: initialized pinctrl subsystem
[    0.021122] NET: Registered protocol family 16
[    0.021989] DMA: preallocated 2048 KiB pool for atomic allocations
[    0.022766] cpuidle: using governor ladder
[    0.022823] cpuidle: using governor menu
[    0.023076] NET: Registered protocol family 42
[    0.023427] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.105522] qcom,gcc-ipq5018 1800000.gcc: Registered ipq5018 GCC clocks provider
[    0.125400] msm_sps_probe: sps:sps is ready
[    1.927323] pps_core: LinuxPPS API ver. 1 registered
[    1.927338] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[    1.927363] PTP clock support registered
[    1.928562] Advanced Linux Sound Architecture Driver Initialized.
[    1.928644] workqueue: max_active 576 requested for napi_workq is out of range, clamping between 1 and 512
[    1.930054] clocksource: Switched to clocksource arch_sys_counter
[    1.931202] thermal_sys: Registered thermal governor ‚step_wise’
[    1.931208] thermal_sys: Registered thermal governor ‚user_space’
[    1.932573] NET: Registered protocol family 2
[    1.932789] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    1.933838] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[    1.933885] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    1.933940] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    1.934025] TCP: Hash tables configured (established 4096 bind 4096)
[    1.934162] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    1.934193] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    1.934504] NET: Registered protocol family 1
[    1.934559] PCI: CLS 0 bytes, default 64
[    1.935610] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[    1.937056] Initialise system trusted keyrings
[    1.937379] workingset: timestamp_bits=46 max_order=17 bucket_order=0
[    1.944245] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.944259] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    1.964251] Key type asymmetric registered
[    1.964272] Asymmetric key parser ‚x509’ registered
[    1.969347] qcom-pcie 80000000.pci: host bridge /soc/pci@80000000 ranges:
[    1.969402] qcom-pcie 80000000.pci:    IO 0x80200000..0x802fffff -> 0x80200000
[    1.969431] qcom-pcie 80000000.pci:   MEM 0x80300000..0x902fffff -> 0x80300000
[    2.201680] qcom-pcie 80000000.pci: Link up
[    2.201902] qcom-pcie 80000000.pci: PCI host bridge to bus 0000:00
[    2.201922] pci_bus 0000:00: root bus resource [bus 00-ff]
[    2.201936] pci_bus 0000:00: root bus resource [io  0x0000-0xfffff] (bus address [0x80200000-0x802fffff])
[    2.201948] pci_bus 0000:00: root bus resource [mem 0x80300000-0x902fffff]
[    2.201999] pci 0000:00:00.0: [17cb:1004] type 01 class 0x060400
[    2.202034] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff]
[    2.202119] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[    2.209317] pci 0000:01:00.0: [<---censored modem vendor ID --->:<---censored modem device ID --->] type 00 class 0xff0000
[    2.209538] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    2.209620] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit]
[    2.210377] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    2.210494] pci 0000:01:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 5 GT/s x1 link at 0000:00:00.0 (capable of 31.506 Gb/s with 16 GT/s x2 link)
[    2.217363] pci 0000:00:00.0: BAR 8: assigned [mem 0x80300000-0x804fffff]
[    2.217387] pci 0000:00:00.0: BAR 9: assigned [mem 0x80500000-0x806fffff 64bit pref]
[    2.217401] pci 0000:00:00.0: BAR 0: assigned [mem 0x80700000-0x80700fff]
[    2.217418] pci 0000:00:00.0: BAR 7: assigned [io  0x1000-0x1fff]
[    2.217439] pci 0000:01:00.0: BAR 0: assigned [mem 0x80300000-0x80300fff 64bit]
[    2.217509] pci 0000:01:00.0: BAR 2: assigned [mem 0x80301000-0x80301fff 64bit]
[    2.217576] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[    2.217587] pci 0000:00:00.0:   bridge window [io  0x1000-0x1fff]
[    2.217600] pci 0000:00:00.0:   bridge window [mem 0x80300000-0x804fffff]
[    2.217612] pci 0000:00:00.0:   bridge window [mem 0x80500000-0x806fffff 64bit pref]
[    2.217805] [qcom_pcie_probe ] PCIe: RC enabled during bootup
[    2.218255] qcom-pcie 80000000.pci: Received Link up event for RC 0
[    2.219158] qcom-pcie a0000000.pci: IRQ mdm2ap_e911 not found
[    2.219192] qcom-pcie a0000000.pci: host bridge /soc/pci@a0000000 ranges:
[    2.219241] qcom-pcie a0000000.pci:    IO 0xa0200000..0xa02fffff -> 0xa0200000
[    2.219270] qcom-pcie a0000000.pci:   MEM 0xa0300000..0xb02fffff -> 0xa0300000
[    2.451645] qcom-pcie a0000000.pci: Link up
[    2.451859] qcom-pcie a0000000.pci: PCI host bridge to bus 0001:00
[    2.451879] pci_bus 0001:00: root bus resource [bus 00-ff]
[    2.451893] pci_bus 0001:00: root bus resource [io  0x100000-0x1fffff] (bus address [0xa0200000-0xa02fffff])
[    2.451903] pci_bus 0001:00: root bus resource [mem 0xa0300000-0xb02fffff]
[    2.451944] pci 0001:00:00.0: [17cb:1004] type 01 class 0x060400
[    2.451977] pci 0001:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff]
[    2.452057] pci 0001:00:00.0: PME# supported from D0 D3hot D3cold
[    2.459228] pci 0001:01:00.0: [<---censored WiFi chip vendor ID --->:<---censored WiFi chip device ID --->] type 00 class 0x028000
[    2.459420] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[    2.460135] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
[    2.460249] pci 0001:01:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 5 GT/s x2 link at 0001:00:00.0 (capable of 15.752 Gb/s with 8 GT/s x2 link)
[    2.467132] pci 0001:00:00.0: BAR 8: assigned [mem 0xa0400000-0xa05fffff]
[    2.467156] pci 0001:00:00.0: BAR 9: assigned [mem 0xa0600000-0xa07fffff 64bit pref]
[    2.467170] pci 0001:00:00.0: BAR 0: assigned [mem 0xa0300000-0xa0300fff]
[    2.467187] pci 0001:00:00.0: BAR 7: assigned [io  0x100000-0x100fff]
[    2.467209] pci 0001:01:00.0: BAR 0: assigned [mem 0xa0400000-0xa05fffff 64bit]
[    2.467277] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
[    2.467288] pci 0001:00:00.0:   bridge window [io  0x100000-0x100fff]
[    2.467300] pci 0001:00:00.0:   bridge window [mem 0xa0400000-0xa05fffff]
[    2.467312] pci 0001:00:00.0:   bridge window [mem 0xa0600000-0xa07fffff 64bit pref]
[    2.467381] [qcom_pcie_probe ] PCIe: RC enabled during bootup
[    2.467776] qcom-pcie a0000000.pci: Received Link up event for RC 0
[    2.469188] bam-dma-engine 704000.dma: num-channels unspecified in dt
[    2.469204] bam-dma-engine 704000.dma: num-ees unspecified in dt
[    2.470223] bam-dma-engine 7884000.dma: qcom,controlled-remotely unspecified
[    2.471299] bam-dma-engine 7984000.dma: qcom,controlled-remotely unspecified
[    2.473648] CPU: IPQ5018, SoC Version: 1.1
[    2.473660] OEM_ID: 0, PROD_ID: 0
[    2.473666] CPU Serial Num: 0
[    2.474429] TZ Log : Will warn on Access Violation, as paniconaccessviolation is not set
[    2.475072] Minidump: rsvd region is not specified
[    2.475751] 58000.qcom,msm-eud: ttyEUD0 at MMIO 0x0 (irq = 16, base_baud = 0) is a EUD UART
[    2.476431] msm_serial 78af000.serial: msm_serial: detected port #0
[    2.476479] msm_serial 78af000.serial: uartclk = 1843199
[    2.476551] 78af000.serial: ttyMSM0 at MMIO 0x78af000 (irq = 15, base_baud = 115199) is a MSM
[    2.476584] msm_serial: console setup on port #0
[    3.458058] printk: console [ttyMSM0] enabled
[    3.463090] msm_serial: driver initialized
[    3.467608] random: crng init done
[    3.482187] brd: module loaded
[    3.487448] loop: module loaded
[    3.489948] nand: device found, Manufacturer ID: 0xc8, Chip ID: 0x11
[    3.489975] nand: ESMT F50D1G41LB(2M) SPI NAND 1G 1.8V
[    3.496090] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    3.507785] 18 fixed-partitions partitions found on MTD device qcom_nand.0
[    3.508486] Creating 18 MTD partitions on „qcom_nand.0”:
[    3.515449] 0x000000000000-0x000000080000 : "0:SBL1"
[    3.522291] 0x000000080000-0x000000100000 : "0:MIBIB"
[    3.527174] 0x000000100000-0x000000140000 : "0:BOOTCONFIG"
[    3.532056] 0x000000140000-0x000000180000 : "0:BOOTCONFIG1"
[    3.537270] 0x000000180000-0x000000280000 : „0:QSEE”
[    3.543621] 0x000000280000-0x000000380000 : „0:QSEE_1”
[    3.548665] 0x000000380000-0x0000003c0000 : „0:DEVCFG”
[    3.553023] 0x0000003c0000-0x000000400000 : „0:DEVCFG_1”
[    3.558055] 0x000000400000-0x000000440000 : „0:CDT”
[    3.563577] 0x000000440000-0x000000480000 : „0:CDT_1”
[    3.568099] 0x000000480000-0x000000500000 : „0:APPSBLENV”
[    3.573617] 0x000000500000-0x000000640000 : „0:APPSBL”
[    3.579743] 0x000000640000-0x000000780000 : „0:APPSBL_1”
[    3.584803] 0x000000780000-0x000000880000 : „0:ART”
[    3.589953] 0x000000880000-0x000000980000 : „0:XUCERT”
[    3.594631] 0x000000980000-0x000000a00000 : „0:TRAINING”
[    3.599243] 0x000000a00000-0x000004400000 : „rootfs”
[    3.656858] mtd: device 16 (rootfs) set to be root filesystem
[    3.657141] mtdsplit: no squashfs found in „rootfs”
[    3.661665] 0x000004400000-0x000007e00000 : „rootfs_1”
[    3.720906] spi_qup 78b5000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
[    3.721890] spi-nor spi0.0: unrecognized JEDEC id bytes: 00 00 00 00 00 00
[    3.949607] qca-mdio 88000.mdio: qca-mdio driver was registered
[    4.160481] qca-mdio 90000.mdio: Reset PHY by GPIO 504
[    4.383578] qca-mdio 90000.mdio: qca-mdio driver was registered
[    4.494000] i2c /dev entries driver
[    4.495018] qcom-tsens 4a9000.thermal-sensor: tsens device is not enabled
[    4.497645] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: [email protected]
[    4.504085] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 799999 KHz
[    4.511868] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1008000 KHz
[    4.519564] qti_scm_restart_reason qti,scm_restart_reason: reset_reason : [0x7D4EE3E7]
[    4.611452] alg: aead: ccm-aes-qce encryption test failed (wrong result) on test vector 0, cfg=„in-place”
[    4.615912] alg: aead: rfc4309-ccm-aes-qce encryption test failed (wrong result) on test vector 0, cfg=„in-place”
[    4.620845] sdhci: Secure Digital Host Controller Interface driver
[    4.630453] sdhci: Copyright(c) Pierre Ossman
[    4.636308] sdhci-pltfm: SDHCI platform and OF driver helper
[    4.641282]
[    4.641282] Version Rollback Feature Disabled
[    4.648422] remoteproc remoteproc0: cd00000.remoteproc is available
[    4.653219] coresight-tmc 6047000.tmc: failed to get flush cti, defer probe
[    4.658698] coresight-dynamic-funnel 6041000.funnel: Uses obsolete Coresight DT bindings
[    4.668103] coresight coresight-etm0: CPU0: ETM v4.0 initialized
[    4.673629] coresight-etm4x 619c000.etm: CPU0: (null) initialized
[    4.680222] coresight coresight-etm1: CPU1: ETM v4.0 initialized
[    4.685531] coresight-etm4x 619d000.etm: CPU1: (null) initialized
[    4.691959] coresight-stm 6002000.stm: coresight-stm : stm_register_device failed, probing deferred
[    4.697797] OF: graph: no port node found in /soc/cti@6010000
[    4.706811] OF: graph: no port node found in /soc/cti@6011000
[    4.712727] OF: graph: no port node found in /soc/cti@6012000
[    4.718351] OF: graph: no port node found in /soc/cti@6013000
[    4.724166] OF: graph: no port node found in /soc/cti@6014000
[    4.729822] OF: graph: no port node found in /soc/cti@6015000
[    4.735641] OF: graph: no port node found in /soc/cti@6016000
[    4.741352] OF: graph: no port node found in /soc/cti@6017000
[    4.747016] OF: graph: no port node found in /soc/cti@6018000
[    4.752818] OF: graph: no port node found in /soc/cti@6019000
[    4.758477] OF: graph: no port node found in /soc/cti@601a000
[    4.764260] OF: graph: no port node found in /soc/cti@601b000
[    4.769929] OF: graph: no port node found in /soc/cti@601c000
[    4.775728] OF: graph: no port node found in /soc/cti@601d000
[    4.781470] OF: graph: no port node found in /soc/cti@601e000
[    4.787122] OF: graph: no port node found in /soc/cti@601f000
[    4.792917] OF: graph: no port node found in /soc/cti@6198000
[    4.798596] OF: graph: no port node found in /soc/cti@6199000
[    4.804393] OF: graph: no port node found in /soc/cti@610c000
[    4.811307] OF: graph: no port node found in /soc/hwevent@6101000
[    4.815482] coresight-hwevent 6101000.hwevent: No csr data
[    4.822016] OF: graph: no port node found in /soc/csr@6001000
[    4.827100] coresight-csr 6001000.csr: CSR initialized: coresight-csr
[    4.835211] NET: Registered protocol family 10
[    4.840617] Segment Routing with IPv6
[    4.843590] NET: Registered protocol family 17
[    4.847344] Bridge firewalling registered
[    4.851858] 8021q: 802.1Q VLAN Support v1.8
[    4.856084] Loading compiled-in X.509 certificates
[    4.876267] sps_register_bam_device: sps:BAM 0x0000000006064000 is registered
[    4.877610] coresight coresight-stm: STM32 initialized
[    4.882796] ubi0: attaching mtd16
[    5.093157] ubi0: scanning is finished
[    5.098356] ubi0: attached mtd16 (name „rootfs”, size 58 MiB)
[    5.098379] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    5.103123] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    5.109842] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[    5.116721] ubi0: good PEBs: 464, bad PEBs: 0, corrupted PEBs: 0
[    5.123488] ubi0: user volume: 3, internal volumes: 1, max. volumes count: 128
[    5.129722] ubi0: max/mean erase counter: 111/24, WL threshold: 4096, image sequence number: 1014258347
[    5.136777] ubi0: available PEBs: 0, total reserved PEBs: 464, PEBs reserved for bad PEB handling: 20
[    5.146092] ubi0: background thread „ubi_bgt0d” started, PID 153
[    5.156286] block ubiblock0_1: created from ubi0:1(rootfs)
[    5.161556] hctosys: unable to open rtc device (rtc0)
[    5.167480] ALSA device list:
[    5.171944]   No soundcards found.
[    5.179039] VFS: Mounted root (squashfs filesystem) readonly on device 253:0.
[    5.179389] Freeing unused kernel memory: 576K
[    5.210180] Run /sbin/init as init process
[    5.431644] init: Console is alive
[    5.432151] init: - watchdog -
[    7.481349] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    7.519489] usbcore: registered new interface driver usbfs
[    7.519566] usbcore: registered new interface driver hub
[    7.524001] usbcore: registered new device driver usb
[    7.535004] Button Hotplug driver version 0.4.1
[    7.545877] ehci_hcd: USB 2.0 ‚Enhanced’ Host Controller (EHCI) Driver
[    7.551446] SCSI subsystem initialized
[    7.555189] ehci-fsl: Freescale EHCI Host controller driver
[    7.556879] ehci-platform: EHCI generic platform driver
[    8.156387] usbcore: registered new interface driver usb-storage
[    8.156937] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    8.165663] init: - preinit -
touch: /etc/config/skb_recycler: Read-only file system
uci: Entry not found
uci: Entry not found
uci: Entry not found
uci: Entry not found
uci: Entry not found
Failed to connect to the switch. Use the „list” command to see which switches are available.
Failed to connect to the switch. Use the „list” command to see which switches are available.
Failed to connect to the switch. Use the „list” command to see which switches are available.
Failed to connect to the switch. Use the „list” command to see which switches are available.
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[   10.116923] UBIFS (ubi0:2): Mounting in unauthenticated mode
[   10.120317] UBIFS (ubi0:2): background thread „ubifs_bgt0_2” started, PID 282
[   10.145266] UBIFS (ubi0:2): recovery needed
[   10.228126] UBIFS (ubi0:2): recovery completed
[   10.228331] UBIFS (ubi0:2): UBIFS: mounted UBI device 0, volume 2, name „rootfs_data”
[   10.231653] UBIFS (ubi0:2): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[   10.239418] UBIFS (ubi0:2): FS size: 17649664 bytes (16 MiB, 139 LEBs), journal size 1015809 bytes (0 MiB, 7 LEBs)
[   10.249284] UBIFS (ubi0:2): reserved for root: 833637 bytes (814 KiB)
[   10.259512] UBIFS (ubi0:2): media format: w5/r0 (latest is w5/r0), UUID <---censored UBIFS UUID --->, small LPT model
[   10.270014] mount_root: switching to ubifs overlay
[   10.289447] urandom-seed: Seeding with /etc/urandom.seed
[   10.318430] procd: - early -
[   10.318663] procd: - watchdog -
[   10.920821] procd: - watchdog -
[   10.928028] procd: - ubus -
[   10.984497] procd: - init -
Please press Enter to activate this console.
Loading cnss2:
[   11.136599] cnss[2]: INFO: Platform driver probed successfully. plat <---censored integrated WiFi chip platform ID ---> tgt <---censored integrated WiFi chip target ID --->
[   11.137794] remoteproc remoteproc1: QCN9000_PCI0 is available
[   11.147197] cnss[27]: INFO: Platform driver probed successfully. plat <---censored WiFi chip platform ID ---> tgt <---censored WiFi chip target ID --->
[   11.155381] cnss[27]: INFO: PCI device <---censored PCI device ID (modem) ---> probed successfully
[   11.161216] cnss: INFO: cnss_plat_ipc_qmi_svc_init: CNSS Platform IPC QMI Service is started
 WIFI FW mount is successful
[   12.191058] urngd: v1.0.2 started.
[   12.245690] kmodloader: loading kernel modules from /etc/modules.d/*
[   12.281329] NET: Registered protocol family 38
[   12.320788] cfg80211: Loading compiled-in X.509 certificates for regulatory database
ftm.conf file is not supported for ap-mp03.1
BT FW mount is failed
[   12.724564] cfg80211: Loaded X.509 cert ‚sforshee: 00b28ddf47aef9cea7’
[   12.726032] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[   12.729982] platform regulatory.0: Falling back to sysfs fallback for: regulatory.db
[   12.766125] ntfs: driver 2.1.32 [Flags: R/O MODULE].
[   12.772368] NET: Registered protocol family 15
[   12.778014] Initializing XFRM netlink socket
[   12.779607] mpls_gso: MPLS GSO support
[   12.904378] cfg80211: failed to load regulatory.db
[   12.908884] ssdk_dt_parse_mac_mode[292]:INFO:mac mode1 doesn’t exit!
[   12.908912] ssdk_dt_parse_mac_mode[300]:INFO:mac mode2 doesn’t exit!
[   12.919818] ssdk_dt_parse_port_bmp[1030]:INFO:port_bmp doesn’t exist!
[   12.921064] ssdk_dt_parse_interrupt[908]:INFO:intr-gpio does not exist
acfg_tool: Issuing blocking call to wait for events
[   13.187886] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[   15.440100] ssdk_mp_reset_init[1299]:INFO:MP reset successfully!
[   15.440865] mpge_phy_api_ops_init[606]:INFO:qca probe mpge phy driver succeeded!
[   15.445947] ssdk_led_init[34]:INFO:port id 0x1, ssdk_led_mode:3, ssdk_led_map:7fc, ssdk_led_src_id:0
[   15.814100] _adpt_mp_uniphy_clk_output_ctrl_set[255]:INFO:uniphy will output clock as 25000000Hz
[   15.814246] regi_init[2548]:INFO:Initializing SCOMPHY Done!!
[   15.822039] ssdk_dt_parse_mac_mode[284]:INFO:mac mode doesn’t exit!
[   15.827580] ssdk_dt_parse_mac_mode[292]:INFO:mac mode1 doesn’t exit!
[   15.833597] ssdk_dt_parse_mac_mode[300]:INFO:mac mode2 doesn’t exit!
[   15.841155] ssdk_dt_parse_interrupt[908]:INFO:intr-gpio does not exist
[   15.846516] ssdk_dt_parse[1406]:INFO:switch node is qca83xx!
[   15.916484] f1_phy_api_ops_init[872]:INFO:qca probe f1 phy driver succeeded!
[   16.160073] qca_ar8327_gpio_reset[2425]:INFO:GPIO504 reset switch done
[   17.870060] regi_init[2496]:INFO:Initializing ISISC Done!!
[   17.870204] regi_init[2574]:INFO:qca-ssdk module init succeeded!
[   17.876558] dp1: ppe offload disabled: 0 for macid 1
[   17.900701] dp1: Switch attached to macid 1 status: 0
[   17.900827] nss-dp 39c00000.dp1 (unnamed net_device) (uninitialized): nss_dp_gmac: Registering netdev eth%d(qcom-id:1) with GMAC, mac_base: 0xffffffc010f10000
[   17.906678] dp2: ppe offload disabled: 0 for macid 2
[   17.921462] dp2: Switch attached to macid 2 status: 0
[   17.924050] nss-dp 39d00000.dp2 (unnamed net_device) (uninitialized): nss_dp_gmac: Registering netdev eth%d(qcom-id:2) with GMAC, mac_base: 0xffffffc010f30000
[   17.933973] **********************************************************
[   17.948035] * NSS Data Plane driver
[   17.949423] **********************************************************
[   17.953847] tun: Universal TUN/TAP device driver, 1.6
[   18.010395] l2tp_core: L2TP core driver, V2.0
[   18.013270] l2tp_netlink: L2TP netlink interface
[   18.288998] ffffffc008dd4d00: NSS core 0 DDR from 40000000 to 41000000
[   18.303093] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[   18.314898] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
[   18.323383] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
[   18.323791] ffffffc008dd4d00: nss core 0 booted successfully
[   18.352409] loading qca-wifi
[   18.362739] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
[   18.369697] nat46: module (version 4c5beee236841724219598fabb1edc93d4f08ce5) loaded.
[   18.412071] gre: GRE over IPv4 demultiplexor driver
[   18.416089] ip_gre: GRE over IPv4 tunneling driver
[   18.427486] ip6_gre: GRE over IPv6 tunneling driver
[   18.456501] rmnet_nss_init(): initializing rmnet_nss
[   18.582211] cryptodev: driver 1.12 loaded.
[   18.607445] PPP generic driver version 2.4.2
[   18.609898] NET: Registered protocol family 24
[   18.614451] PPTP driver version 0.8.5
[   18.667463] openvswitch: Open vSwitch switching datapath
[   18.773004] nss_lag_init[352]:LAG Manager Installed
[   18.858498] diag: failed to find diag_dload imem node
[   18.914260] QCA multicast snooping installed successfully
[   18.921907] <NSS-CRYPTO>:module loaded Build_ID - 03/04/25, 15:53:58 SoC=ipq50xx
[   18.926767] nss_macsec init success
[   18.936753] bt_driver 1943008.bt: bt_parse_ipc
[   18.936826] bt_driver 1943008.bt: bt_parse_mem
[   18.940265] bt_driver 1943008.bt: bt_parse_dt operating in secure mode
[   18.952738] remoteproc remoteproc2: bt_rproc_driver is available
[   18.952871] bt_rproc_driver bt_rproc_driver: Probed
[   19.000630] GACT probability on
[   19.003111] Mirror/redirect action on
[   19.023381] u32 classifier
[   19.023408]     input device check on
[   19.024975]     Actions configured
[   19.066683] Simple TC action Loaded
[   19.118962] fuse: init (API version 7.31)
[   19.161985] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[   19.162060] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[   19.168013] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x0000000000010010
[   19.182818] mhi_init Quectel_Linux_PCIE_MHI_Driver_V1.3.5
[   19.184079] xhci-hcd xhci-hcd.0.auto: irq 95, io mem 0x08a00000
[   19.192514] mhi_pci_probe pci_dev->name = 0000:01:00.0, domain=0, bus=1, slot=0, vendor=<---censored modem vendor ID --->, device=<---censored modem device ID --->
[   19.196554] mhi_q 0000:01:00.0: BAR 0: assigned [mem 0x80300000-0x80300fff 64bit]
[   19.207049] hub 1-0:1.0: USB hub found
[   19.219554] hub 1-0:1.0: 1 port detected
[   19.222475] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[   19.222729] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[   19.228309] mhi_q 0000:01:00.0: enabling device (0000 -> 0002)
[   19.238351] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[   19.242604] usb usb2: We don’t know the algorithms for LPM for this host, disabling LPM.
Disable Network Reload 0
[   19.256559] hub 2-0:1.0: USB hub found
[   19.258497] hub 2-0:1.0: 1 port detected
qcawifi configuration is disable
[   19.301526] usbcore: registered new interface driver cdc_acm
[   19.301553] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[   19.317849] usbcore: registered new interface driver cdc_wdm
[   19.396446] [I][mhi_netdev_enable_iface] Prepare the channels for transfer
[   19.404436] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[   19.512314] [I][mhi_netdev_enable_iface] Exited.
[   19.513858] rmnet_vnd_register_device(rmnet_mhi0.1)=0
[   19.530279] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[   19.530826] net rmnet_mhi0 rmnet_mhi0.1: NSS context created
[   19.717558] nf_conntrack_rtsp v0.7 loading
[   19.831281] nf_nat_rtsp v0.7 loading
[   20.000151] PPP MPPE Compression module registered
[   20.050578] usbcore: registered new interface driver uas
[   20.123342] usbcore: registered new interface driver usbserial_generic
[   20.123957] usbserial: USB Serial support registered for generic
[   20.328853] xt_time: kernel timezone is -0000
[   20.339759] usbcore: registered new interface driver cdc_ether
[   20.370350] usbcore: registered new interface driver cdc_ncm
[   20.380252] usbcore: registered new interface driver huawei_cdc_ncm
[   20.428258] usbcore: registered new interface driver qmi_wwan
[   20.446769] usbcore: registered new interface driver rndis_host
[   20.489729] usbcore: registered new interface driver cdc_mbim
[   20.500192] usbcore: registered new interface driver option
[   20.500922] usbserial: USB Serial support registered for GSM modem (1-port)
[   20.504911] option 1-1:1.0: GSM modem (1-port) converter detected
[   20.540826] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0
[   20.541484] option 1-1:1.2: GSM modem (1-port) converter detected
[   20.547192] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1
[   20.561996] option 1-1:1.3: GSM modem (1-port) converter detected
[   20.562487] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB2
[   20.583284] usbcore: registered new interface driver qcserial
[   20.583424] usbserial: USB Serial support registered for Qualcomm USB modem
[   20.589260] kmodloader: done loading kernel modules from /etc/modules.d/*
MLD Single Netdev is ENABLED
Setting peer_ext_stats params - stats_max_window:10, stats_max_packets_per_window:1000
Setting sawf params - sawf_msduq_tid_skid:1, sawf_msduq_reclaim:1, sawf_reclaim_timer:20
[   26.913350] configuring additional NSS pbufs
[   26.960103] additional pbufs of size 9003008 got added to NSS
Disable Network Reload 0
[   30.388139] wlan: [2567:I:ANY] qdf_ini_parse: INI values read: 104
[   30.388182] wlan: [2567:I:ANY] qdf_ini_parse: INI file parse successful
[   30.419909] wlan: [2567:I:ANY] qdf_ini_parse: INI values read: 67
[   30.419946] wlan: [2567:I:ANY] qdf_ini_parse: INI file parse successful
[   31.205136] device eth1 entered promiscuous mode
[   31.206804] br-lan: port 1(eth1.1) entered blocking state
[   31.211765] br-lan: port 1(eth1.1) entered disabled state
[   31.215019] device eth1.1 entered promiscuous mode
[   31.243115] br-lan: port 1(eth1.1) entered blocking state
[   31.243155] br-lan: port 1(eth1.1) entered forwarding state
[   31.322485] Bringup wifi
[   32.251235] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[   34.076309] ECM init
[   34.076500] ECM database jhash random seed: 0x2d860e3e
[   34.205243] ECM init complete
[   34.352165] ECM OVS Test INIT
No qca-mad module enabled
[   39.580917] smart_antenna: module license ‚Proprietary’ taints kernel.
[   39.580955] Disabling lock debugging due to kernel taint
[   39.658854] ./IPQ5018/regdb.bin ./qcn9000/regdb.bin ./qcn9000/amss.bin
[   40.263655] wlan: [5114:I:ANY] =======ol_if_register_wifi3_0==========
[   40.263655]
[   40.263702] wlan: [5114:I:ANY] osif_nss_register_module: NSS wifi ops registered for target_type:1 with soc_ops:000000009202f74d
[   40.272232] remoteproc remoteproc0: powering up cd00000.remoteproc
[   40.319816] remoteproc remoteproc0: Booting fw image IPQ5018/q6_fw.mdt, size 1052
[   40.319948] wlan: [5114:I:ANY] ol_ath_wifi_ssr: SSR event 2 bus_type 1
[   41.554721] Subsystem error monitoring/handling services are up
[   41.616503] cnss[2]: INFO: QMI WLFW service connected, state: 0x1
[   41.617204] diag: In diag_send_feature_mask_update, control channel is not open, p: 2, 00000000efcb973d
[   41.640491] cnss[2]: INFO: FW INI CFG file IPQ5018/fw_ini_cfg.bin is present
[   41.640547] cnss[2]: INFO: device_id : <---censored integrated WiFi chip device ID ---> mem mode : [1]
[   41.646939] diag: In diag_send_peripheral_buffering_mode, buffering flag not set for 2
[   41.652690] cnss[2]: INFO: platform name: D50 5G
[   41.663009] cnss[2]: INFO: FW File 0 download
[   41.669379] cnss[2]: ERR: WARNING: More memory is reserved.Reserved size 0x1700000,Requested size 0x1500000.
[   41.671310] wlan: [5114:I:ANY] ol_ath_wifi_ssr: SSR event 3 bus_type 1
[   41.682452] wlan: [5114:I:ANY] ol_ath_wifi_ssr: Waiting for probe lock
[   41.687749] wlan: [5114:I:ANY] ol_ath_wifi_ssr: Starting Driver Probe
[   41.694078] cnss[2]: INFO: Target capability: chip_id: 0x0, chip_family: 0x4, board_id: 0xff, soc_id: 0xffffffff, fw_version: 0x2c058558, fw_build_timestamp: 2024-07-11 16:03, otp_version: 0x0 eeprom_caldata_read_timeout 0s bdf_dnld_method 1 regdb_mandatory 0 rxgainlut_support 0
[   41.694171] cnss[2]: INFO: Waiting for FW ready. Device: <---censored integrated WiFi chip device ID --->, FW ready timeout: 60 seconds
[   41.748429] cnss[2]: INFO: Downloading BDF: IPQ5018/regdb.bin, size: 24278
[   41.772770] cnss[2]: INFO: Downloading BDF: IPQ5018/bdwlan.b24, size: 131072
[   41.890633] cnss[2]: INFO: Downloading BDF: IPQ5018/caldata.bin, size: 131072
[   42.080169] cnss[2]: INFO: FW ready received for device 0xfffc
[   42.080531] wlan: [5114:I:ANY] pld_ahb_wlan_enable: cnss_mode: Mission mode
[   42.091671] cnss[2]: INFO: Sending mode message, mode: MISSION(0), state: 0x7
[   42.099556] wlan: [5114:D:dfs] WLAN_DEBUG_DFS1 : dfs_psoc_obj_create_notification: DFS obj attach to psoc successfully
[   42.120201] wlan: [5114:I:ANY] qdf_ini_parse: INI values read: 0
[   42.120237] wlan: [5114:I:ANY] qdf_ini_parse: INI file parse fail: invalid file format
[   42.131830] wlan: [5114:E:CONFIG] cfg_ini_parse_to_store: Failed to parse *.ini file @ QCA5018.ini; status:4
[   42.180517] wlan: [5114:I:ANY] qdf_ini_parse: INI values read: 80
[   42.180560] wlan: [5114:I:ANY] qdf_ini_parse: INI file parse successful
[   42.194056] wlan: [5114:I:ANY] qdf_ini_section_parse: INI values parse successful read: 4 from section 512M_OR_DP_MON_4CHAIN
[   42.195639] wlan: [5114:I:ANY] qdf_ini_section_parse: INI values parse successful read: 4 from section 1G-TX-DESC
[   42.195716] wlan: [2560:E:ANY] send_filled_buffers_to_user: Send Failed -3 drop_count = 1
[   42.205383] wlan: [5114:I:ANY] osif_nss_wifi_soc_setup: nss-wifili:#1 register wifili function for soc 29
[   42.227530] wlan: [5114:I:ANY] osif_nss_wifi_soc_setup: nss register id -1 nss config 3 Target Type 1d
[   42.274639] wlan: [5114:I:ANY] ol_target_init_complete: CDP soc attach success
[   42.274696] wlan: [5114:I:ANY] ol_target_init_complete: Soc attach success NSS config 0
[   42.283678] wlan: [957:I:TIF] HE_CAP Info = 9a08010d
[   42.289078] wlan: [957:I:TIF] Num HW modes = 1
[   42.295986] wlan: [957:I:TIF] Num PHY = 1
[   42.298267] wlan: [957:I:TIF] FW Build Version (Ext.) = 268435456
[   42.302874] wlan: [957:I:TIF] HDL Version: MajorVersion.MinorVersion = 0.0
[   42.311930] wlan: [957:I:TIF] Preferred HW Mode = 0 Num Radios = 1
[   42.315569] wlan: [957:W:TIF] add_11ax_mode_flags: 11AX wireless modes are not populated by the target in reg capabilities, adding 11AX wireless modes
[   42.324003] wlan: [957:I:TIF] init_deinit_add_11ax_modes: hw_mode_id = 0 phy_id = 0 wireless modes = 0
[   42.336368] wlan: [957:I:ANY] BDF version: 1 CAL version: 1 Status: 0
[   42.346802] wlan: [957:E:TIF] tgt_if_set_reg_afc_configure: service afc support not enable
[   42.354347] wlan: [957:I:TIF] init_deinit_alloc_pdevs: CDP PDEV ATTACH success
[   42.360648] wlan: [957:I:ANY] qdf_ini_section_parse: INI values parse successful read: 2 from section 1G-2G
[   42.370834] wlan: [957:I:TIF] ol_ath_ema_init_ctx: Limit max_mgmt_frm_sz to 1.5K for target_type:29
[   42.375680] wlan: [957:I:MBSSIE] ol_ath_ema_init_ctx: rnr_field_size_limit_override:0
[   42.386893] wlan: [957:I:MBSSIE] ol_ath_ema_init_ctx: rnr_field_size_limit_override & RNR_SIZE_LIMIT_OVERRIDE_MASK:>0
[   42.395497] wlan: [957:I:MBSSIE] ol_ath_ema_init_ctx: mbss_ie_enable :0x0
[   42.403347] wlan: [957:I:MBSSIE] ol_ath_ema_init_ctx: max_pp: 1
[   42.409938] wlan: [957:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   42.416933] wlan: [957:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   42.425950] wlan: [957:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   42.435895] wlan: [957:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   42.445894] wlan: [957:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   42.455881] wlan: [957:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   42.465856] wlan: [957:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   42.480276] wlan: [957:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   42.485721] wlan: [957:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   42.497057] wlan: [957:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   42.497623] nss_cryptoapi_ablk_setkey[223]:ffffff8017c0b480: Unable to allocate crypto session(-2)
[   42.505822] wlan: [957:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   42.525882] wlan: [957:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   42.535797] wlan: [957:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   42.545666] wlan: [957:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   42.555872] wlan: [957:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   42.566884] wlan: [957:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   42.578338] wlan: [957:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_config_low: 0x77777777
[   42.585572] wlan: [957:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_config_high: 0x77777777
[   42.593895] wlan: [957:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size_limit: 128
[   42.604855] wlan: [957:I:MBSSIE] ol_ath_ema_sanitize_optional_ie_config: optional_ie_size_limit: 166
[   42.618004] wlan: [957:I:MBSSIE] ol_ath_ema_init_ctx:  max_pp:1  max_ngroups:1
[   42.621524] wlan: [957:I:MBSSIE] ol_ath_ema_determine_max_ngroup: max mgmt frame size :1500
[   42.628419] wlan: [957:I:MBSSIE] ol_ath_ema_determine_max_ngroup: common_part_sz      :800
[   42.641830] wlan: [957:I:MBSSIE] ol_ath_ema_determine_max_ngroup: max_non_tx_sz       :700
[   42.645088] wlan: [957:I:MBSSIE] ol_ath_ema_determine_max_ngroup: max_non_tx_sz_limit :294
[   42.653519] wlan: [957:I:MBSSIE] ol_ath_ema_determine_max_ngroup: max_pp              :1
[   42.662531] wlan: [957:I:MBSSIE] ol_ath_ema_determine_max_ngroup: no_of_ntx_vap_in_1_bcn:   2
[   42.669834] wlan: [957:I:MBSSIE] ol_ath_ema_determine_max_ngroup: no_of_ntx_vap_in_pp_bcns: 2
[   42.678367] wlan: [957:I:MBSSIE] ol_ath_ema_determine_max_ngroup: no_of_vaps_in_1_grp:      2
[   42.686953] wlan: [957:I:MBSSIE] ol_ath_ema_determine_max_ngroup: max_ngroup:               8
[   42.696503] wlan: [957:I:MBSSIE] ol_ath_ema_determine_max_ngroup: grp_sz:                   2
[   42.703913] wlan: [957:I:MBSSIE] ol_ath_ema_init_ctx: rnr_6ghz_adv_override:0
[   42.712733] wlan: [957:I:ANY] qdf_ini_section_parse: INI values parse successful read: 0 from section SINGLE_PHY_2G
[   42.719442] wlan: [957:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1
[   42.731038] wlan: [957:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0
[   42.736953] wlan: [957:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 10
[   42.746106] wlan: [957:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1
[   42.752842] wlan: [957:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0
[   42.759686] wlan: [957:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 10
[   42.768821] wlan: [957:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1
[   42.775545] wlan: [957:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0
[   42.786097] wlan: [957:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 10
[   42.791219] wlan: [957:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1
[   42.810211] wlan: [957:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0
[   42.810340] wlan: [957:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 10
[   42.817630] wlan: [957:I:TIF] init_deinit_update_pdev_tgt_info: CDP PDEV INIT success
[   43.198576] wlan: [5114:I:ANY] ath_get_radio_index: Error: Could not match the device name : wifi%d
[   43.198634] wlan: [5114:E:NSS] [nss-wifili]: pdev:000000000653ec17 radio_ifnum:30 scheme_id:1 radio_priority:0
[   43.218172] wlan: [5114:E:TIF] target_if_lro_hash_config: pdev with id 0 is NULL
[   43.221628] wlan: [5114:I:MSCS] qca_mscs_module_init:
[   43.221628] ****QCA MSCS Initialization Done**** SoC 00000000b9049b08
[   43.229326] wlan: [5114:I:ANY] __ol_ath_attach: soc(0x00000000b9049b08): soc0 pdev: wifi0
[   43.249042] wlan: [5114:I:COHOSTED_BSS] COHOSTED BSSID IND disabled for pdev[0]
[   43.249092] wlan: [5114:I:TIF] ol_ath_pdev_regdmn_init:  phy id = 0 Modes supported
[   43.256405] wlan: [5114:I:TIF] ol_ath_pdev_regdmn_init:  11b = 1 11g = 1 11a = 0 11n = 1 11ac = 1 11ax = 1
[   43.271221] wlan: [5114:I:TIF] ol_ath_pdev_regdmn_init:  Reg cap - phy_id = 0 supp_bnd = 1, modes = 680680c, lo_2ghz = 2312, hi_2ghz = 2732 lo_5ghz = 0, hi_5ghz = 0
[   43.273699] wlan: [5114:E:ANY] ol_ath_dev_attach: MBSSID or co-hosted mode is required for Macreq Ext
[   43.288694] wlan: [5114:I:ANY] ol_ath_dev_attach: Macreq Ext enabled=0
[   43.308403] wlan: [5114:I:MBSSIE] ieee80211_mbss_attach: :>
[   43.308447] wlan: [5114:I:MBSSIE] ieee80211_mbss_attach: :<ret:0
[   43.316850] wlan: [5114:I:ANY] wlan_scan_update_channel_list: num_chan: 11
[   43.319204] wlan: [5114:E:ANY] ol_ath_pdev_attach: Error: LED GPIO is not configured!!
[   43.340573] wlan: [0:E:NSS] [nss-wifili]: NSS Wifili DBDC Repeater enable message passed
[   43.343445] wlan: [5114:I:ANY] ol_ath_pdev_host_trig_txbf_sounding_init: TxBF Standalone Sounding is not enabled
[   43.348009] wlan: [5114:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: cfg block channel list is empty
[   43.365980] wlan: [5114:I:ANY] ol_ath_enable_fraglist: Enabled Fraglist bit for the radio wifi0 features 41
[   43.375417] wlan: [5114:I:Dynamic Mode Change] ol_ath_check_and_reconfig_hw_mode: Running with HW mode = 0
[   43.382670] remoteproc remoteproc0: remote processor cd00000.remoteproc is now up
[   43.401643] remoteproc remoteproc1: powering up QCN9000_PCI0
[   44.468118] ***** Fast boot VAP mode is enabled wifi0 *****
[   44.789825] remoteproc remoteproc1: Booting fw image qcn9000/amss.bin, size 4280376
[   44.789954] wlan: [5114:I:ANY] ol_ath_wifi_ssr: SSR event 2 bus_type 0
[   44.832719] cnss_pci 0001:01:00.0: BAR 0: assigned [mem 0xa0400000-0xa05fffff 64bit]
[   44.832862] cnss_pci 0001:01:00.0: enabling device (0000 -> 0002)
[   44.865955] cnss_pci 0001:01:00.0: DMA Memory initialized at 0x0000000050000000 size 0x500000
[   44.866528] cnss[27]: INFO: SOC VERSION INFO: Family num: 0x4, Device num: 0xd, Major Ver: 0x1, Minor Ver: 0x0
[   44.884158] cnss[27]: INFO: Setting 0x20 to QRTR_NODE_ID_REG
[   44.884188] cnss[27]: INFO: Value from QRTR_NODE_ID_REG: 0x20
[   44.920162] mhi mhi0: Requested to power ON
[   44.928626] mhi mhi0: Power on setup success
[   45.060258] mhi mhi0: Wait for device to enter SBL or Mission mode
[   45.060701] mhi mhi0: boot-args not defined in DTS. ret:-22
[   45.136168] cnss[27]: INFO: MHI status cb is called with reason MISSION MODE(5)
[   45.136774] mhi_uci mhi0_LOOPBACK: channel:LOOPBACK successfully probed
[   45.169141] cnss[27]: INFO: QMI WLFW service connected, state: 0x11
[   45.192233] cnss[27]: INFO: FW INI CFG file qcn9000/fw_ini_cfg.bin is present
[   45.192285] cnss[27]: INFO: device_id : <---censored WiFi chip device ID ---> mem mode : [0]
[   45.198516] cnss[27]: INFO: platform name: D50 5G
[   45.226719] cnss[27]: INFO: FW File 0 download
[   45.244535] cnss[27]: INFO: Target capability: chip_id: 0x0, chip_family: 0x0, board_id: 0xff, soc_id: 0xffffffff, fw_version: 0x2c058558, fw_build_timestamp: 2024-07-11 15:27, otp_version: 0x0 eeprom_caldata_read_timeout 0s bdf_dnld_method 1 regdb_mandatory 0 rxgainlut_support 0
[   45.246667] cnss[27]: INFO: Downloading BDF: qcn9000/regdb.bin, size: 24278
[   45.270550] wlan: [5114:I:ANY] ol_ath_wifi_ssr: SSR event 3 bus_type 0
[   45.275075] wlan: [5114:I:ANY] ol_ath_wifi_ssr: Waiting for probe lock
[   45.317061] wlan: [5114:I:ANY] ol_ath_wifi_ssr: Starting Driver Probe
[   45.317096] cnss[27]: INFO: Waiting for FW ready. Device: <---censored WiFi chip device ID --->, FW ready timeout: 60 seconds
[   45.376804] cnss[27]: INFO: Downloading BDF: qcn9000/bdwlan.ba0, size: 131072
[   45.422758] cnss: ERR: Path /tmp/ftm.conf doesn’t exist
[   45.432575] cnss[27]: INFO: Downloading BDF: qcn9000/caldata_1.bin, size: 131072
[   45.700205] cnss[27]: INFO: FW ready received for device 0x1104
[   45.703810] cnss[27]: INFO: Sending mode message, mode: MISSION(0), state: 0x17
[   45.733773] wlan: [5114:D:dfs] WLAN_DEBUG_DFS1 : dfs_psoc_obj_create_notification: DFS obj attach to psoc successfully
[   45.787525] wlan: [5114:I:ANY] qdf_ini_parse: INI values read: 1
[   45.787568] wlan: [5114:I:ANY] qdf_ini_parse: INI file parse successful
[   45.910896] wlan: [5114:I:ANY] qdf_ini_parse: INI values read: 87
[   45.910942] wlan: [5114:I:ANY] qdf_ini_parse: INI file parse successful
[   45.923945] wlan: [5114:I:ANY] qdf_ini_section_parse: INI values parse successful read: 4 from section 512M_OR_DP_MON_4CHAIN
[   45.924330] wlan: [5114:I:ANY] osif_nss_wifi_soc_setup: nss-wifili:#1 register wifili function for soc 26
[   45.978482] wlan: [5114:I:ANY] osif_nss_wifi_soc_setup: nss register id -1 nss config 3 Target Type 1a
[   46.040898] wlan: [5114:I:ANY] ol_target_init_complete: CDP soc attach success
[   46.040956] wlan: [5114:I:ANY] ol_target_init_complete: Soc attach success NSS config 0
[   46.057366] wlan: [957:I:TIF] HE_CAP Info = 9a18010d
[   46.057555] wlan: [957:I:TIF] Num HW modes = 1
[   46.063022] wlan: [957:I:TIF] Num PHY = 1
[   46.065719] wlan: [957:I:TIF] FW Build Version (Ext.) = 268436040
[   46.069830] wlan: [957:I:TIF] HDL Version: MajorVersion.MinorVersion = 8.9
[   46.101138] wlan: [957:I:TIF] Preferred HW Mode = 0 Num Radios = 1
[   46.101287] wlan: [957:W:TIF] add_11ax_mode_flags: 11AX wireless modes are not populated by the target in reg capabilities, adding 11AX wireless modes
[   46.109661] wlan: [957:I:TIF] init_deinit_add_11ax_modes: hw_mode_id = 0 phy_id = 0 wireless modes = 0
[   46.133726] wlan: [957:E:TIF] init_deinit_populate_rcc_aoa_cap_ext2: Extraction of aoa caps failed
[   46.133785] wlan: [957:I:ANY] BDF version: 2 CAL version: 2 Status: 0
[   46.149109] wlan: [957:I:TIF] init_deinit_alloc_pdevs: CDP PDEV ATTACH success
[   46.149697] wlan: [957:I:ANY] qdf_ini_section_parse: INI values parse successful read: 5 from section 5G
[   46.157065] wlan: [957:I:MBSSIE] ol_ath_ema_init_ctx: rnr_field_size_limit_override:0
[   46.175956] wlan: [957:I:MBSSIE] ol_ath_ema_init_ctx: rnr_field_size_limit_override & RNR_SIZE_LIMIT_OVERRIDE_MASK:>0
[   46.175998] wlan: [957:I:MBSSIE] ol_ath_ema_init_ctx: mbss_ie_enable :0x0
[   46.192642] wlan: [957:I:MBSSIE] ol_ath_ema_init_ctx: max_pp: 1
[   46.192704] wlan: [957:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   46.199245] wlan: [957:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   46.217097] wlan: [957:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   46.218297] wlan: [957:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   46.260163] wlan: [957:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   46.260204] wlan: [957:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   46.280175] wlan: [957:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   46.280221] wlan: [957:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   46.319098] wlan: [957:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   46.319149] wlan: [957:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   46.364359] wlan: [957:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   46.364451] wlan: [957:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   46.411507] wlan: [957:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   46.411560] wlan: [957:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   46.449398] wlan: [957:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   46.449524] wlan: [957:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size: 0 ven_ie_size_nibble: 7
[   46.483699] wlan: [957:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_config_low: 0x77777777
[   46.483743] wlan: [957:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_config_high: 0x77777777
[   46.504614] wlan: [957:I:MBSSIE] ol_ath_ema_sanitize_vendor_ie_config: vendor_ie_size_limit: 128
[   46.504658] wlan: [957:I:MBSSIE] ol_ath_ema_sanitize_optional_ie_config: optional_ie_size_limit: 166
[   46.529175] wlan: [957:I:MBSSIE] ol_ath_ema_init_ctx:  max_pp:1  max_ngroups:1
[   46.529217] wlan: [957:I:MBSSIE] ol_ath_ema_determine_max_ngroup: max mgmt frame size :2000
[   46.541560] wlan: [957:I:MBSSIE] ol_ath_ema_determine_max_ngroup: common_part_sz      :800
[   46.543701] wlan: [957:I:MBSSIE] ol_ath_ema_determine_max_ngroup: max_non_tx_sz       :1200
[   46.572199] wlan: [957:I:MBSSIE] ol_ath_ema_determine_max_ngroup: max_non_tx_sz_limit :294
[   46.572244] wlan: [957:I:MBSSIE] ol_ath_ema_determine_max_ngroup: max_pp              :1
[   46.579521] wlan: [957:I:MBSSIE] ol_ath_ema_determine_max_ngroup: no_of_ntx_vap_in_1_bcn:   4
[   46.632640] wlan: [957:I:MBSSIE] ol_ath_ema_determine_max_ngroup: no_of_ntx_vap_in_pp_bcns: 4
[   46.632680] wlan: [957:I:MBSSIE] ol_ath_ema_determine_max_ngroup: no_of_vaps_in_1_grp:      4
[   46.677204] wlan: [957:I:MBSSIE] ol_ath_ema_determine_max_ngroup: max_ngroup:               4
[   46.677258] wlan: [957:I:MBSSIE] ol_ath_ema_determine_max_ngroup: grp_sz:                   4
[   46.701560] wlan: [957:I:MBSSIE] ol_ath_ema_init_ctx: rnr_6ghz_adv_override:0
[   46.706240] wlan: [957:I:ANY] qdf_ini_section_parse: INI values parse successful read: 1 from section SINGLE_PHY_5G
[   46.733538] wlan: [957:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1
[   46.733586] wlan: [957:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0
[   46.739765] wlan: [957:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 17
[   46.759294] wlan: [957:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1
[   46.759342] wlan: [957:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0
[   46.768712] wlan: [957:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 17
[   46.783200] wlan: [957:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1
[   46.783243] wlan: [957:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0
[   46.789423] wlan: [957:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 17
[   46.834930] wlan: [957:I:TIF] init_deinit_get_total_num_ema_vaps: num_radios: 1
[   46.834978] wlan: [957:I:TIF] init_deinit_get_total_num_ema_vaps: ema_max_vap_cnt: 0
[   46.844847] wlan: [957:I:TIF] init_deinit_get_total_num_vdevs_for_soc: num_vdevs: 17
[   46.861085] wlan: [957:I:TIF] init_deinit_update_pdev_tgt_info: CDP PDEV INIT success
[   47.411945] wlan: [957:E:TIF] init_deinit_ready_event_handler: Host Requested 529 peers. FW Supports 145 peers
[   47.447042] wlan: [5114:I:ANY] ath_get_radio_index: Error: Could not match the device name : wifi%d
[   47.447119] wlan: [5114:E:NSS] [nss-wifili]: pdev:0000000083289504 radio_ifnum:31 scheme_id:0 radio_priority:1
[   47.471232] wlan: [5114:E:TIF] target_if_lro_hash_config: pdev with id 0 is NULL
[   47.476432] wlan: [5114:I:MSCS] qca_mscs_module_init:
[   47.476432] ****QCA MSCS Initialization Done**** SoC 00000000f8fc0a1d
[   47.477812] wlan: [5114:I:ANY] __ol_ath_attach: soc(0x00000000f8fc0a1d): soc1 pdev: wifi1
[   47.517855] wlan: [5114:I:COHOSTED_BSS] COHOSTED BSSID IND disabled for pdev[0]
[   47.517912] wlan: [5114:I:TIF] ol_ath_pdev_regdmn_init:  phy id = 0 Modes supported
[   47.538131] wlan: [5114:I:TIF] ol_ath_pdev_regdmn_init:  11b = 0 11g = 0 11a = 1 11n = 1 11ac = 1 11ax = 1
[   47.538181] wlan: [5114:I:TIF] ol_ath_pdev_regdmn_init:  Reg cap - phy_id = 0 supp_bnd = 2, modes = f97f9001, lo_2ghz = 0, hi_2ghz = 0 lo_5ghz = 4900, hi_5ghz = 5920
[   47.549229] wlan: [5114:E:ANY] ol_ath_dev_attach: MBSSID or co-hosted mode is required for Macreq Ext
[   47.578900] wlan: [5114:I:ANY] ol_ath_dev_attach: Macreq Ext enabled=0
[   47.579580] wlan: [5114:I:MBSSIE] ieee80211_mbss_attach: :>
[   47.591806] wlan: [5114:I:MBSSIE] ieee80211_mbss_attach: :<ret:0
[   47.596699] wlan: [5114:I:ANY] wlan_scan_update_channel_list: num_chan: 25
[   47.599922] wlan: [0:E:NSS] [nss-wifili]: NSS Wifili DBDC Repeater enable message passed
[   47.617643] wlan: [5114:I:ANY] ol_ath_pdev_host_trig_txbf_sounding_init: TxBF Standalone Sounding is not enabled
[   47.618173] wlan: [5114:I:ANY] ol_ath_pri20_cfg_blockchanlist_parse: cfg block channel list is empty
[   47.637416] wlan: [5114:I:ANY] ol_ath_enable_fraglist: Enabled Fraglist bit for the radio wifi1 features 41
[   47.640986] wlan: [5114:I:Dynamic Mode Change] ol_ath_check_and_reconfig_hw_mode: Running with HW mode = 0
[   47.651088] remoteproc remoteproc1: remote processor QCN9000_PCI0 is now up
[   48.405612] wlan: [6738:I:ANY] osif_nss_register_module: NSS wifi ops registered for target_type:0 with soc_ops:000000003684bbd8
[   48.418832] wlan: [6738:I:ANY] init_ath_pci_2_0: 
6ath_ol_pci_2_0:  (Atheros/multi-bss)
[   49.049380] ***** Fast boot VAP mode is enabled wifi1 *****
[   50.755153] nss_cryptoapi_ablk_setkey[223]:ffffff8009fcf080: Unable to allocate crypto session(-2)
Disable Network Reload 0
 WIFI FW mount is successful
[   51.583175] CALLER: /bin/sh/lib/wifi/launch_vap.shwifi0, PID: 5696 arg: enable wifi0
ftm.conf file is not supported for ap-mp03.1
MLD Single Netdev is ENABLED: Add MLD Interface
BT FW mount is failed
1
qcawifi qcawificfg80211: enable radio wifi0
[   53.259893] wlan: [8127:I:ANY] wlan_scan_update_channel_list: num_chan: 11
[   53.260928] wlan: [8127:I:ANY] number of channels: 2G = 11 5G = 0, 6G = 0
Disable Network Reload 0
[   53.873544] S99ipq-done (8195): drop_caches: 3
[   54.213891] CALLER: /bin/sh/lib/wifi/launch_vap.shwifi1, PID: 6616 arg: enable wifi1
Enable ol_stats by default for Lithium platforms
1
[   55.186137] wlan: [8471:I:ANY] ol_ath_set_config_param: set TXBF_SND_PERIOD: val 100 stat 0
qcawifi qcawificfg80211: enable radio wifi1
[   55.650255] wlan: [0:I:RPTR] RPTR disconnect_timeout:10
[   55.749169] wlan: [0:I:RPTR] RPTR reconfiguration_timeout:60
[   55.761755] wlan: [8594:I:ANY] wlan_scan_update_channel_list: num_chan: 25
[   55.763474] wlan: [8594:E:ANY] dfs_init_chan_state_array: channel state array initialized
[   55.776949] wlan: [8594:I:ANY] wlan_scan_update_channel_list: num_chan: 25
[   55.779520] wlan: [8594:I:ANY] number of channels: 2G = 0 5G = 25, 6G = 0
Bootconfig: Age is Updated
Enable ol_stats by default for Lithium platforms
Enable ol_stats by default for Lithium platforms
number of vifs: ath0
[   57.303912] wlan: [8908:I:ANY] ol_ath_set_config_param: set TXBF_SND_PERIOD: val 100 stat 0
[   57.868239] wlan: [0:I:RPTR] RPTR disconnect_timeout:10
[   57.879100] wlan: [9042:I:MBSSIE] osif_mbssid_sanity_check: mbssid_sanity_ok: YES
[   57.879164] wlan: [9042:I:ANY] osifp_create_wlan_vap: VDEV Create <---censored MAC address (device 1) --->
[   57.890349] wlan: [9042:I:ANY] wlan_vap_create: devhandle=0x000000000653ec17, opmode=IEEE80211_M_HOSTAP, flags=0x1
[   57.890349]
[   57.896833] wlan: [9042:I:ANY] osif_nss_ol_vap_create: NSS wifi offload VAP create IF 32 nss_id -1
[   57.907107] wlan: [9042:I:ANY] osif_nss_ol_vap_create: NSS radio_if 30
[   57.918964] wlan: [0:I:ANY] osif_nss_vdev_cfg_callback: VDEV configuration success: 0
[   57.922299] wlan: [9042:I:ANY] osif_nss_ol_vap_create: vap create 00000000efb40532 : if_num 32
[   57.941471] wlan: [9042:E:ANY] wlan_create_attach_vdev_rawsim_ctxt: simulation module not registerd
[   57.942223] wlan: [9042:I:ANY] WLAN-NSS: VAP NSS ops initialized
[   57.949740] wlan: [9042:I:RPTR] RPTR vdev flags:0 pdev flags:0 vdev_id:0 pdev_id:0
[   57.998355] wlan: [0:I:RPTR] RPTR reconfiguration_timeout:60
Enable ol_stats by default for Lithium platforms
number of vifs: ath1
[   59.645581] wlan: [9287:I:MBSSIE] osif_mbssid_sanity_check: mbssid_sanity_ok: YES
[   59.645629] wlan: [9287:I:ANY] osifp_create_wlan_vap: VDEV Create <---censored MAC address (device 2) --->
[   59.653024] wlan: [9287:I:ANY] wlan_vap_create: devhandle=0x0000000083289504, opmode=IEEE80211_M_HOSTAP, flags=0x1
[   59.653024]
[   59.661926] wlan: [9287:I:ANY] osif_nss_ol_vap_create: NSS wifi offload VAP create IF 33 nss_id -1
[   59.671978] wlan: [9287:I:ANY] osif_nss_ol_vap_create: NSS radio_if 31
[   59.681095] wlan: [0:I:ANY] osif_nss_vdev_cfg_callback: VDEV configuration success: 0
[   59.687108] wlan: [9287:I:ANY] osif_nss_ol_vap_create: vap create 0000000087816064 : if_num 33
[   59.696475] wlan: [9287:E:ANY] wlan_create_attach_vdev_rawsim_ctxt: simulation module not registerd
[   59.730207] wlan: [9287:I:ANY] WLAN-NSS: VAP NSS ops initialized
[   59.730527] wlan: [9287:I:RPTR] RPTR vdev flags:0 pdev flags:0 vdev_id:0 pdev_id:0
[   61.605508] br-lan: port 2(ath0) entered blocking state
[   61.605545] br-lan: port 2(ath0) entered disabled state
[   61.610917] device ath0 entered promiscuous mode
[   61.637396] br-lan: port 3(ath1) entered blocking state
[   61.637490] br-lan: port 3(ath1) entered disabled state
[   61.643874] device ath1 entered promiscuous mode
[   61.655206] device ath0 left promiscuous mode
[   61.659721] br-lan: port 2(ath0) entered disabled state
[   61.702357] device ath1 left promiscuous mode
[   61.702633] br-lan: port 3(ath1) entered disabled state
Number of Umac reset irqs detected : 0 and number of cpus detected 2
Number of Umac reset irqs detected : 0 and number of cpus detected 2
1
1
1
MLD Single Netdev is ENABLED
1
MLD Single Netdev is ENABLED
[   65.118422] 8021q: adding VLAN 0 to HW filter on device ath0
[   65.119113] br-lan: port 2(ath0) entered blocking state
[   65.124352] br-lan: port 2(ath0) entered disabled state
[   65.131552] device ath0 entered promiscuous mode
[   65.133926] br-lan: port 2(ath0) entered blocking state
[   65.138175] br-lan: port 2(ath0) entered forwarding state
[   65.368177] wlan: [3079:I:ANY] wlan_cfg80211_start_ap: Start ath0 psoc:0 vdev:0
[   65.368337] wlan: [3079:I:ANY] DES SSID SET=D50_5G_2.4G
[   65.374667] wlan: [3079:I:ANY] desired hw mode: 29
[   65.379773] wlan: [3079:I:ANY] wlan_cfg80211_chan_to_phymode: band:0 width: 2 channel_cfreq: 2412 center_freq1: 2422 chandef.center_freq2: 0 flags: 416
[   65.384797] wlan: [3079:I:ANY] HT Support:000000009c1eed15 VHT Support:00000000df06ea7a HE Support:00000000cf130033
[   65.398048] wlan: [3079:I:ANY] Max supported wireless mode: 3
[   65.408431] wlan: [3079:I:ANY] Phymode: 26
[   65.408431]
[   65.414870] wlan: [3079:I:MBSSIE] wlan_cfg80211_start_ap: Set tx-vap ath0: vdev_id:0
[   65.420353] wlan: [3079:I:ANY] wlan_mbss_start_ht40: HT40 Arg: 0000000000000000
OK
[   65.446269] 8021q: adding VLAN 0 to HW filter on device ath1
[   65.448627] br-lan: port 3(ath1) entered blocking state
[   65.451423] br-lan: port 3(ath1) entered disabled state
[   65.456828] device ath1 entered promiscuous mode
[   65.462002] br-lan: port 3(ath1) entered blocking state
[   65.466011] br-lan: port 3(ath1) entered forwarding state
[   65.484501] wlan: [3079:I:ANY] wlan_cfg80211_start_ap: Start ath1 psoc:1 vdev:0
[   65.484579] wlan: [3079:I:ANY] DES SSID SET=D50_5G_5G
[   65.490974] wlan: [3079:I:ANY] wlan_cfg80211_chan_to_phymode: band:1 width: 5 channel_cfreq: 5180 center_freq1: 5250 chandef.center_freq2: 0 flags: 32
[   65.495844] wlan: [3079:I:ANY] HT Support:00000000962cc783 VHT Support:0000000027341f56 HE Support:00000000fa59732b
[   65.509475] wlan: [3079:I:ANY] Max supported wireless mode: 3
[   65.519710] wlan: [3079:I:ANY] Phymode: 31
[   65.519710]
[   65.525791] wlan: [3079:I:ANY] wlan_cfg80211_chan_to_phymode: band:1 width: 5 channel_cfreq: 5180 center_freq1: 5250 chandef.center_freq2: 0 flags: 32
[   65.531407] wlan: [3079:I:ANY] HT Support:00000000962cc783 VHT Support:0000000027341f56 HE Support:00000000fa59732b
[   65.544636] wlan: [3079:I:ANY] Max supported wireless mode: 3
[   65.554847] wlan: [3079:I:ANY] Phymode: 31
[   65.554847]
[   65.561354] wlan: [3079:I:MBSSIE] wlan_cfg80211_start_ap: Set tx-vap ath1: vdev_id:0
OK
OK
OK
MLD Single Netdev is ENABLED: Add MLD to Bridge
MLD Single Netdev is ENABLED: Add MLD to Bridge
MLD Single Netdev is ENABLED: Add MLD to Bridge
Default Service Class Count: 8
Custom Service Class Count: 20
SLA Count: 10
126 95 X X X 0 0 0
127 95 X X X 0 0 0
128 95 X X X 0 0 0
***** QDSS Tracing Configuration completed *******
****** Starting QDSS for Integrated ********
device: wifi0 vifs: ath0
device: wifi1 vifs: ath1 ath1
[   68.739456] ***** Fast boot VAP is completed… *****
[   68.902252] wlan: [0:I:ANY] ieee80211_acs_post_event: [EXT] Channel number: 000000004d410115
[   68.902295] wlan: [0:I:ANY] wlan_mbss_done_ht40: Channel: 000000004d410115
[   68.911052] wlan: [2909:I:ANY] ieee80211_ht40intol_evhandler: [EXT] Lock held duration (9ms)
[   69.102510] qca-wifi loaded
[   69.154800] wlan: [0:E:ANY] mlme_ext_vap_up: VAP (ath0) <---censored MAC address (device 1) ---> is up, vdev_id:0 pdev_id:0 psoc_id:0
[  127.600731] wlan: [0:E:ANY] mlme_ext_vap_up: VAP (ath1) <---censored MAC address (device 2) ---> is up, vdev_id:0 pdev_id:0 psoc_id:1





BusyBox v1.36.1 (2024-12-15 07:22:42 UTC) built-in shell (ash)

     MM           NM                    MMMMMMM          M       M
   $MMMMM        MMMMM                MMMMMMMMMMM      MMM     MMM
  MMMMMMMM     MM MMMMM.              MMMMM:MMMMMM:   MMMM   MMMMM
MMMM= MMMMMM  MMM   MMMM       MMMMM   MMMM  MMMMMM   MMMM  MMMMM’
MMMM=  MMMMM MMMM    MM       MMMMM    MMMM    MMMM   MMMMNMMMMM
MMMM=   MMMM  MMMMM          MMMMM     MMMM    MMMM   MMMMMMMM
MMMM=   MMMM   MMMMMM       MMMMM      MMMM    MMMM   MMMMMMMMM
MMMM=   MMMM     MMMMM,    NMMMMMMMM   MMMM    MMMM   MMMMMMMMMMM
MMMM=   MMMM      MMMMMM   MMMMMMMM    MMMM    MMMM   MMMM  MMMMMM
MMMM=   MMMM   MM    MMMM    MMMM      MMMM    MMMM   MMMM    MMMM
MMMM$ ,MMMMM  MMMMM  MMMM    MMM       MMMM   MMMMM   MMMM    MMMM
  MMMMMMM:      MMMMMMM     M         MMMMMMMMMMMM  MMMMMMM MMMMMMM
    MMMMMM       MMMMN     M           MMMMMMMMM      MMMM    MMMM
     MMMM          M                    MMMMMMM        M       M
       M
 ———————————————————————————————
   For those about to rock… OpenWrt 23.05-SNAPSHOT, r0-6d811db45
 ———————————————————————————————
=== WARNING! =====================================
There is no root password defined on this device!
Use the „passwd” command to set up a new password
in order to prevent unauthorized SSH logins.
—————————————————————————
root@Exigo_Hub:/#
root@Exigo_Hub:/#