test integrasi bool aar global

// library PZEM
#include <PZEM004T.h>

#define relay (PB1)
const int pinBuzzer = PB0;

// Libary OLED
#include "Arduino.h"
#include "Wire.h"
#include "Adafruit_GFX.h"
#include "Adafruit_SSD1306.h"

// library NFC
#include <SPI.h>
#include <Adafruit_PN532.h>

#define PN532_SCK  (PA5)
#define PN532_MOSI (PA7)
#define PN532_SS   (PA4)
#define PN532_MISO (PA6)
#define PN532_IRQ   (2)
#define PN532_RESET (3)

Adafruit_PN532 nfc(PN532_SCK, PN532_MISO, PN532_MOSI, PN532_SS);
#if defined(ARDUINO_ARCH_SAMD)
#define Serial SerialUSB
#endif

// oled pin = B6 B7 / SCL SDA
// pzem pin = A9 A10 / TX RX / Serial1
// nfc pin = SPI
// bt pin = serial uart 2

#define OLED_RESET 4
Adafruit_SSD1306 display(OLED_RESET);

PZEM004T* pzem;
IPAddress ip(192, 168, 1, 1);

bool aar = false;
// START PZEM
void setup()
{
  pinMode(relay, OUTPUT);
  digitalWrite(relay, HIGH);

  pinMode(pinBuzzer, OUTPUT);

  Serial.begin(115200);   //serial untuk membaca PZEM
  Serial2.begin(38400); //serial BT HC 05
  Serial2.println("\nBismillah");

  pzem = new PZEM004T(&Serial1);
  pzem->setAddress(ip);

  display.begin(SSD1306_SWITCHCAPVCC, 0x3C);
  display.clearDisplay();
}

void loop()
{
  float v = pzem->voltage(ip);
  if (v < 0.0) v = 0.0;
  Serial.print(v);
  Serial.print("V; ");

  float i = pzem->current(ip);
  if (i < 0.0) i = 0.0;
  {
    Serial.print(i);
    Serial.print("A; ");
  }

  float p = pzem->power(ip);
  if (p <= 0.0) p = 0.0;
  {
    Serial.print(p);
    Serial.print("W; ");
  }

  float e = pzem->energy(ip);
  if (e < 0.0) e = 0.0;
  {
    Serial.print(e);
    Serial.print("Wh; ");
  }

  float cosphi;
  float c;
  if (v * i == 0)
  {
    c = 0;
  }
  else
  {
    c = p / (v * i);
  }

  float saldo;
  float s = 100;
  float t = s - e;
  if (t <= 0.0) t = 0.0;

  Serial.println();

  if (i >= 4)
  {
    digitalWrite(relay, LOW);
  }

  if (t <= 10)
  {
    tone(pinBuzzer, 750, 250);
  }

  if (t <= 0)
  {
    digitalWrite(relay, LOW);
  }
  displayData(v, i, p, e, c, t);
  // break loop atau lanjut loop
  if (aar)
  {
    token();
  }
  else
  {
    displayData(v, i, p, e, c, t);
  }
}
// STOP PZEM


// START MONITOR PZEM BLUETOOTH & OLED
void displayData(float tegangan, float arus, float daya, float energi, float cosphi, float token)
{
  display.clearDisplay();
  display.setTextSize(1);
  display.setTextColor(WHITE);

  display.setCursor(0, 0);
  display.print("Tegangan: ");
  display.setCursor(70, 0);
  display.print(tegangan);
  display.println(" V");

  display.setCursor(0, 8);
  display.print("Arus: ");
  display.setCursor(70, 8);
  display.print(arus);
  display.println(" A");

  display.setCursor(0, 16);
  display.print("Daya: ");
  display.setCursor(70, 16);
  display.print(daya);
  display.println(" W");

  display.setCursor(0, 24);
  display.print("Token: ");
  display.setCursor(70, 24);
  display.print(token);
  display.println(" Wh");

  display.display();

  char buffer[1000];

  sprintf(buffer, "Tegangan  : %0.2f V\nArus           : %0.2f A\nDaya          : %0.2f W\nEnergi        : %0.2f Wh\nCos Phi       : %0.2f \nToken          : %0.2f Wh\n", tegangan, arus, daya, energi, cosphi, token);
  Serial2.println(buffer);
}
// STOP MONITOR PZEM BLUETOOTH & OLED



// START NFC

char input = 0;

void token(void)
{
  Serial2.begin(38400);

  if (Serial2.available() > 0)
  {
    input == Serial2.read();

    if (input == '1')
      aar = true;
    {
      display.clearDisplay();
      display.display();

      display.setCursor(0, 0);
      display.print("Mulai NFC");
      Serial.print("Mulai NFC");
#ifndef ESP8266
#endif
      Serial.begin(9600);
      //      Serial.println("Hello Arif!");

      nfc.begin();

      uint32_t versiondata = nfc.getFirmwareVersion();
      if (! versiondata)
      {
        Serial.print("Didn't find PN53x board");
        while (1); // halt
      }

      nfc.SAMConfig();

      display.begin(SSD1306_SWITCHCAPVCC, 0x3C);
      display.clearDisplay();

      display.setTextSize(1);
      display.setTextColor(WHITE);

      Serial.println(" Tempelkan kartu pelanggan");

      display.setCursor(0, 0);
      display.print("Tempelkan kartu");
      display.setCursor(0, 8);
      display.print("pelanggan");
      display.display();
    }
  }
  else
  {
    aar = false;
  }
}

String str1, str3;
String str2 = "0x49 0xB3 0x9E 0x2B";
void loop2(void)
{
  uint8_t success;
  uint8_t uid[] = { 0, 0, 0, 0, 0, 0, 0 };
  uint8_t uidLength;

  success = nfc.readPassiveTargetID(PN532_MIFARE_ISO14443A, uid, &uidLength);

  if (success)
  {
    String str22 = hexify(uid, uidLength);
    results(str22);
  }
}

String hexify(uint8_t u[], byte len)
{
  String out = "";
  for (byte i = 0; i < len; i++)
  {
    String a = String(u[i], HEX);
    a.toUpperCase();
    if (a.length() == 1) a = "0" + a;
    out += "0x" + a + " ";
  }
  out.trim();
  return out;
}

void results(String str)
{
  if (str == str2)
  {
    display.clearDisplay();
    display.setTextSize(1);
    display.setTextColor(WHITE);

    display.setCursor(0, 0);
    display.print("-> Pelanggan dikenali");
    display.setCursor(0, 8);
    display.print("   ID Pelanggan:");
    display.setCursor(0, 16);
    display.print("   1303167045");
    display.display();

    Serial.println("\n  1303167045");
  }
  else
  {
    display.clearDisplay();
    display.setTextSize(1);
    display.setTextColor(WHITE);

    display.setCursor(0, 0);
    display.print("-> Bukan pelanggan");
    display.setCursor(0, 8);
    display.print("   Gunakan tag");
    display.setCursor(0, 16);
    display.print("   lainnya");
    display.display();

    Serial.println("\n  Bukan pelanggan");
  }
  Serial.print("");
}

// STOP NFC