API tools faq
paste
Advertisement
zhubr

Untitled

zhubr
Jun 24th, 2021
200
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 11.18 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Linux version 4.14.221 (nick@linux-wrk) (gcc version 7.5.0 (OpenWrt GCC 7.5.0 r11306-c4a6851c72)) #5 Thu Jun 24 11:21:00 GMT-3 2021
  2. [ 0.000000] x86/fpu: Probing for FPU: FSW=0x0000 FCW=0x037f
  3. [ 0.000000] x86/fpu: x87 FPU will use FSAVE
  4. [ 0.000000] e820: BIOS-provided physical RAM map:
  5. [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
  6. [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
  7. [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000001d7ffff] usable
  8. [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fecfffff] reserved
  9. [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
  10. [ 0.000000] BIOS-e820: [mem 0x00000000ffff0000-0x00000000ffffffff] reserved
  11. [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
  12. [ 0.000000] DMI not present or invalid.
  13. [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
  14. [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
  15. [ 0.000000] e820: last_pfn = 0x1d80 max_arch_pfn = 0x100000
  16. [ 0.000000] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC
  17. [ 0.000000] initial memory mapped: [mem 0x00000000-0x007fffff]
  18. [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
  19. [ 0.000000] ACPI: Early table checksum verification disabled
  20. [ 0.000000] ACPI BIOS Error (bug): A valid RSDP was not found (20170728/tbxfroot-244)
  21. [ 0.000000] 29MB LOWMEM available.
  22. [ 0.000000] mapped low ram: 0 - 01d80000
  23. [ 0.000000] low ram: 0 - 01d80000
  24. [ 0.000000] Zone ranges:
  25. [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
  26. [ 0.000000] Normal [mem 0x0000000001000000-0x0000000001d7ffff]
  27. [ 0.000000] Movable zone start for each node
  28. [ 0.000000] Early memory node ranges
  29. [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
  30. [ 0.000000] node 0: [mem 0x0000000000100000-0x0000000001d7ffff]
  31. [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000001d7ffff]
  32. [ 0.000000] On node 0 totalpages: 7454
  33. [ 0.000000] free_area_init_node: node 0, pgdat c04b29a0, node_mem_map c1d40020
  34. [ 0.000000] DMA zone: 32 pages used for memmap
  35. [ 0.000000] DMA zone: 0 pages reserved
  36. [ 0.000000] DMA zone: 3998 pages, LIFO batch:0
  37. [ 0.000000] Normal zone: 27 pages used for memmap
  38. [ 0.000000] Normal zone: 3456 pages, LIFO batch:0
  39. [ 0.000000] e820: [mem 0x01d80000-0xfebfffff] available for PCI devices
  40. [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
  41. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  42. [ 0.000000] pcpu-alloc: [0] 0
  43. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 7395
  44. [ 0.000000] Kernel command line: showopts debug rootwait root=/dev/nfs ro nfsroot=192.168.100.1:/opt/usrfiles/openwrt,v3,rsize=1024,wsize=32768,mountport=2048,port=2049 ip=dhcp BOOT_IMAGE=/bootdisk/bzImage-486
  45. [ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
  46. [ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
  47. [ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
  48. [ 0.000000] Initializing CPU#0
  49. [ 0.000000] Memory: 25924K/29816K available (1997K kernel code, 206K rwdata,568K rodata, 384K init, 248K bss, 3892K reserved, 0K cma-reserved)
  50. [ 0.000000] virtual kernel memory layout:
  51. fixmap : 0xfffe3000 - 0xfffff000 ( 112 kB)
  52. cpu_entry : 0xffc00000 - 0xffc28000 ( 160 kB)
  53. vmalloc : 0xc2580000 - 0xffbfe000 ( 982 MB)
  54. lowmem : 0xc0000000 - 0xc1d80000 ( 29 MB)
  55. .init : 0xc04bf000 - 0xc051f000 ( 384 kB)
  56. .data : 0xc03f342d - 0xc04b7980 ( 785 kB)
  57. .text : 0xc0200000 - 0xc03f342d (1997 kB)
  58. [ 0.000000] Checking if this processor honours the WP bit even in supervisormode...Ok.
  59. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  60. [ 0.000000] CPU 0 irqstacks, hard=c1404000 soft=c1406000
  61. [ 0.000000] Console: colour VGA+ 80x25
  62. [ 0.000000] console [tty0] enabled
  63. [ 0.004000] Calibrating delay loop... 38.14 BogoMIPS (lpj=76288)
  64. [ 0.048000] pid_max: default: 4096 minimum: 301
  65. [ 0.048000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  66. [ 0.048000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  67. [ 0.056000] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
  68. [ 0.056000] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
  69. [ 0.056000] CPU: 486 (family: 0x4, model: 0x0)
  70. [ 0.068000] Performance Events: no PMU driver, software events only.
  71. [ 0.088000] random: get_random_bytes called from 0xc04d9995 with crng_init=0
  72. [ 0.092000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  73. [ 0.096000] futex hash table entries: 16 (order: -5, 192 bytes)
  74. [ 0.100000] NET: Registered protocol family 16
  75. [ 0.120000] EISA bus registered
  76. [ 0.120000] cpuidle: using governor ladder
  77. [ 0.124000] clocksource: pit: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1601818034827 ns
  78. [ 0.176000] PCI: PCI BIOS revision 2.10 entry at 0xf6f41, last bus=0
  79. [ 0.176000] PCI: Using configuration type 1 for base access
  80. [ 0.292000] ACPI: Interpreter disabled.
  81. [ 0.296000] dmi: Firmware registration failed.
  82. [ 0.296000] PCI: Probing PCI hardware
  83. [ 0.296000] PCI: root bus 00: using default resources
  84. [ 0.296000] PCI: Probing PCI hardware (bus 00)
  85. [ 0.300000] PCI host bridge to bus 0000:00
  86. [ 0.300000] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
  87. [ 0.300000] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
  88. [ 0.300000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
  89. [ 0.304000] pci_bus 0000:00: scanning bus
  90. [ 0.304000] pci 0000:00:00.0: [10b9:1489] type 00 class 0x060000
  91. [ 0.304000] pci 0000:00:00.0: calling 0xc02e1ee5
  92. [ 0.308000] pci 0000:00:05.0: [10ec:8139] type 00 class 0x020000
  93. [ 0.308000] pci 0000:00:05.0: reg 0x10: [io 0xf800-0xf8ff]
  94. [ 0.308000] pci 0000:00:05.0: reg 0x14: [mem 0xffbeff00-0xffbeffff]
  95. [ 0.308000] pci 0000:00:05.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
  96. [ 0.312000] pci 0000:00:05.0: supports D1 D2
  97. [ 0.312000] pci 0000:00:05.0: PME# supported from D1 D2 D3hot
  98. [ 0.312000] pci 0000:00:05.0: PME# disabled
  99. [ 0.316000] pci_bus 0000:00: fixups for bus
  100. [ 0.316000] pci_bus 0000:00: bus scan returning with max=00
  101. [ 0.316000] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
  102. [ 0.320000] PCI: pci_cache_line_size set to 32 bytes
  103. [ 0.320000] pci 0000:00:05.0: BAR 0: reserving [io 0xf800-0xf8ff flags 0x40101] (d=0, p=0)
  104. [ 0.320000] pci 0000:00:05.0: BAR 1: reserving [mem 0xffbeff00-0xffbeffff flags 0x40200] (d=0, p=0)
  105. [ 0.320000] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
  106. [ 0.320000] e820: reserve RAM buffer [mem 0x01d80000-0x03ffffff]
  107. [ 0.336000] clocksource: Switched to clocksource pit
  108. [ 0.338940] FS-Cache: Loaded
  109. [ 0.338940] pnp: PnP ACPI: disabled
  110. [ 0.338940] PnPBIOS: Scanning system for PnP BIOS support...
  111. [ 0.338940] PnPBIOS: PnP BIOS support was not detected.
  112. [ 0.466993] pci 0000:00:05.0: BAR 6: assigned [mem 0x04000000-0x0400ffff pref]
  113. [ 0.466993] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
  114. [ 0.466993] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
  115. [ 0.470993] NET: Registered protocol family 2
  116. [ 0.482998] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
  117. [ 0.482998] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  118. [ 0.482998] TCP: Hash tables configured (established 1024 bind 1024)
  119. [ 0.487087] UDP hash table entries: 256 (order: 0, 4096 bytes)
  120. [ 0.487087] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  121. [ 0.491001] NET: Registered protocol family 1
  122. [ 0.499092] RPC: Registered named UNIX socket transport module.
  123. [ 0.499092] RPC: Registered udp transport module.
  124. [ 0.499092] RPC: Registered tcp transport module.
  125. [ 0.499092] RPC: Registered tcp NFSv4.1 backchannel transport module.
  126. [ 0.499092] PCI: CLS 0 bytes, default 32
  127. [ 0.510998] platform rtc_cmos: registered platform RTC device (no PNP devicefound)
  128. [ 0.526999] workingset: timestamp_bits=30 max_order=13 bucket_order=0
  129. [ 0.551001] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
  130. [ 0.551001] e100: Copyright(c) 1999-2006 Intel Corporation
  131. [ 0.551001] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
  132. [ 0.555239] e1000: Copyright (c) 1999-2006 Intel Corporation.
  133. [ 0.555239] 8139cp 0000:00:05.0: runtime IRQ mapping not provided by arch
  134. [ 0.555239] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
  135. [ 0.555239] 8139cp 0000:00:05.0: This (id 10ec:8139 rev 10) is not an 8139C+compatible chip, use 8139too
  136. [ 0.559552] 8139too 0000:00:05.0: runtime IRQ mapping not provided by arch
  137. [ 0.559552] 8139too: 8139too Fast Ethernet driver 0.9.28
  138. [ 0.571353] 8139too 0000:00:05.0 eth0: RealTek RTL8139 at 0xc2582f00, 00:e0:7d:a1:0f:25, IRQ 9
  139. [ 0.583003] i8042: PNP: No PS/2 controller found.
  140. [ 0.583003] i8042: Probing ports directly.
  141. [ 0.595995] serio: i8042 KBD port at 0x60,0x64 irq 1
  142. [ 0.599001] platform eisa.0: Probing EISA bus 0
  143. [ 0.603011] mce: Unable to init MCE device (rc: -5)
  144. [ 0.606999] mce: Using 0 MCE banks
  145. [ 0.606999] sched_clock: Marking stable (606999730, 0)->(608000000, -1000270)
  146. [ 0.630999] 8139too 0000:00:05.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
  147. [ 0.650999] Sending DHCP requests ., OK
  148. [ 0.786999] IP-Config: Got DHCP answer from 192.168.100.1, my address is 192.168.100.58
  149. [ 0.786999] IP-Config: Complete:
  150. [ 0.786999] device=eth0, hwaddr=00:e0:7d:a1:0f:25, ipaddr=192.168.100.58, mask=255.255.255.0, gw=192.168.100.1
  151. [ 0.786999] host=192.168.100.58, domain=TUMAN3M, nis-domain=(none)
  152. [ 0.786999] bootserver=192.168.100.1, rootserver=192.168.100.1, rootpath= nameserver0=192.168.100.1
  153. [ 0.998999] random: fast init done
  154. [ 1.466999] VFS: Mounted root (nfs filesystem) readonly on device 0:9.
  155. [ 1.510999] Freeing unused kernel memory: 384K
  156. [ 1.514999] Write protecting the kernel text: 2000k
  157. [ 1.514999] Write protecting the kernel read-only data: 576k
  158. [ 3.750999] init: Console is alive
  159. [ 5.690999] kmodloader: loading kernel modules from /etc/modules-boot.d/*
  160. [ 5.722999] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
  161. [ 5.738999] init: - preinit -
  162. [ 8.934999] random: procd: uninitialized urandom read (4 bytes read)
  163. [ 9.030999] procd: - early -
  164. [ 11.350999] procd: - ubus -
  165. [ 11.554999] random: ubusd: uninitialized urandom read (4 bytes read)
  166. [ 11.562999] random: ubusd: uninitialized urandom read (4 bytes read)
  167. [ 11.562999] random: ubusd: uninitialized urandom read (4 bytes read)
  168. [ 11.578999] procd: - init -
  169. [ 19.646999] urandom_read: 4 callbacks suppressed
  170. [ 19.646999] random: jshn: uninitialized urandom read (4 bytes read)
  171. [ 20.158999] random: jshn: uninitialized urandom read (4 bytes read)
  172. [ 25.810999] random: crng init done
  173.  
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!