API tools faq
paste
Advertisement
Guest User

Untitled

a guest
May 17th, 2017
570
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
C 25.21 KB | None | 0 0
raw download clone embed print report
  1. root@OpenWrt:/tmp# mtd write o.bin linux
  2. Unlocking linux ...
  3. Writing from o.bin to linux ...    
  4. root@OpenWrt:/tmp# sync
  5. root@OpenWrt:/tmp# sync
  6. root@OpenWrt:/tmp#
  7.  
  8. CFE version 1.0.37-6.5.17 for BCM96338 (32bit,SP,BE)
  9. Copyright (C) 2000-2005 Broadcom Corporation.
  10.  
  11. Boot Address 0xbfc00000
  12.  
  13. Initializing Arena.
  14. Initializing Devices.
  15. Parallel flash device: name AM29LV320MB, id 0x2200, size 4096KB
  16. error on Ethernet Switch setup
  17. Failed initializing enet hardware
  18. CPU type 0x29010: 240MHz
  19. Total memory: 16777216 bytes (16MB)
  20.  
  21. Total memory used by CFE:  0x80401000 - 0x805283F0 (1209328)
  22. Initialized Data:          0x8041D7F0 - 0x8041FA50 (8800)
  23. BSS Area:                  0x8041FA50 - 0x804263F0 (27040)
  24. Local Heap:                0x804263F0 - 0x805263F0 (1048576)
  25. Stack Area:                0x805263F0 - 0x805283F0 (8192)
  26. Text (code) segment:       0x80401000 - 0x8041D7E8 (116712)
  27. Boot area (physical):      0x00529000 - 0x00569000
  28. Relocation Factor:         I:00000000 - D:00000000
  29.  
  30. Board IP address                  : 192.168.1.1  
  31. Host IP address                   : 192.168.1.100  
  32. Gateway IP address                :  
  33. Run from flash/host (f/h)         : f  
  34. Default host run file name        : vmlinux  
  35. Default host flash file name      : bcm963xx_fs_kernel  
  36. Boot delay (0-9 seconds)          : 3  
  37. Board Id Name                     : 96338W  
  38. Psi size in KB                    : 24
  39. Number of MAC Addresses (1-32)    : 2  
  40. Base MAC Address                  : 00:11:22:33:44:55  
  41. Ethernet PHY Type                 : External Switch Using Reverse MII
  42. Memory size in MB                 : 16
  43. CMT Thread Number                 : 0
  44. Dying Gasp Enable (0:Disable 1:Enable)  : 0
  45.  
  46. Could not activate network interface 'eth0': CFE error -1
  47. *** Press Enter to stop auto run (3 seconds) ***
  48. Auto run second count down: 0
  49. Code Address: 0x80010000, Entry Address: 0x80010000
  50. Decompression OK!
  51. Entry at 0x80010000
  52. Starting program at 0x80010000
  53. Linux version 2.6.32.10 (al@al-desktop) (gcc version 4.3.3 (GCC) ) #3 Thu Apr 1 10:38:13 BST 2010
  54. Detected Broadcom 0x6338 CPU revision a2
  55. CPU frequency is 240 MHz
  56. 16MB of RAM installed
  57. registering 8 GPIOs
  58. board_bcm963xx: CFE version: 1.0.37-6.5
  59. bootconsole [early0] enabled
  60. CPU revision is: 00029010 (Broadcom BCM6338)
  61. board_bcm963xx: board name: 96338W
  62. Determined physical RAM map:
  63.  memory: 01000000 @ 00000000 (usable)
  64. Initrd not found or empty - disabling initrd
  65. Zone PFN ranges:
  66.   Normal   0x00000000 -> 0x00001000
  67. Movable zone start PFN for each node
  68. early_node_map[1] active PFN ranges
  69.     0: 0x00000000 -> 0x00001000
  70. Built 1 zonelists in Zone order, mobility grouping off.  Total pages: 4064
  71. Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
  72. PID hash table entries: 64 (order: -4, 256 bytes)
  73. Dentry cache hash table entries: 2048 (order: 1, 8192 bytes)
  74. Inode-cache hash table entries: 1024 (order: 0, 4096 bytes)
  75. Primary instruction cache 16kB, VIPT, 2-way, linesize 16 bytes.
  76. Primary data cache 8kB, 2-way, VIPT, no aliases, linesize 16 bytes
  77. Memory: 13156k/16384k available (2144k kernel code, 3228k reserved, 593k data, 140k init, 0k highmem)
  78. Hierarchical RCU implementation.
  79. NR_IRQS:128
  80. Calibrating delay loop... 239.10 BogoMIPS (lpj=478208)
  81. Mount-cache hash table entries: 512
  82. NET: Registered protocol family 16
  83. bio: create slab <bio-0> at 0
  84. Switching to clocksource MIPS
  85. NET: Registered protocol family 2
  86. IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  87. TCP established hash table entries: 512 (order: 0, 4096 bytes)
  88. TCP bind hash table entries: 512 (order: -1, 2048 bytes)
  89. TCP: Hash tables configured (established 512 bind 512)
  90. TCP reno registered
  91. NET: Registered protocol family 1
  92. audit: initializing netlink socket (disabled)
  93. type=2000 audit(0.236:1): initialized
  94. squashfs: version 4.0 (2009/01/31) Phillip Lougher
  95. Registering mini_fo version $Id$
  96. JFFS2 version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
  97. msgmni has been set to 25
  98. io scheduler noop registered
  99. io scheduler deadline registered (default)
  100. gpiodev: gpio device registered with major 254
  101. gpiodev: gpio platform device registered with access mask FFFFFFFF
  102. bcm63xx_uart.0: ttyS0 at MMIO 0xfffe0300 (irq = 10) is a bcm63xx_uart
  103. console [ttyS0] enabled, bootconsole disabled
  104. console [ttyS0] enabled, bootconsole disabled
  105. bcm963xx_flash: 0x00400000 at 0x1fc00000
  106. bcm963xx: Found 1 x16 devices at 0x0 in 16-bit bank
  107.  Amd/Fujitsu Extended Query Table at 0x0040
  108. number of CFI chips: 1
  109. cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
  110. bcm963xx_flash: Read Signature value of CFE1CFE1
  111. bcm963xx_flash: CFE bootloader detected
  112. bcm963xx_flash: CFE boot tag found with version 6, board type 6338W, and tagid bccfe.
  113. bcm963xx_flash: Partition 0 is CFE offset 80c76a20 and length 0
  114. bcm963xx_flash: Partition 1 is kernel offset c77 and length 0
  115. bcm963xx_flash: Partition 2 is rootfs offset cb8 and length 0
  116. bcm963xx_flash: Partition 3 is nvram offset cf9 and length 0
  117. bcm963xx_flash: Partition 4 is linux offset d39 and length 0
  118. bcm963xx_flash: Spare partition is 270000 offset and length 180000
  119. Creating 5 MTD partitions on "bcm963xx":
  120. 0x000000000000-0x000000010000 : "CFE"
  121. 0x000000010100-0x000000100000 : "kernel"
  122. mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
  123. 0x000000100000-0x0000003f0000 : "rootfs"
  124. mtd: partition "rootfs" set to be root filesystem
  125. mtd: partition "rootfs_data" created automatically, ofs=270000, len=180000
  126. 0x000000270000-0x0000003f0000 : "rootfs_data"
  127. 0x0000003f0000-0x000000400000 : "nvram"
  128. 0x000000010000-0x0000003f0000 : "linux"
  129. bcm63xx_wdt started, timer margin: 30 sec
  130. Registered led device: adsl
  131. Registered led device: ses
  132. Registered led device: ppp-fail
  133. Registered led device: power
  134. Registered led device: stop
  135. TCP westwood registered
  136. NET: Registered protocol family 17
  137. 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
  138. All bugs added by David S. Miller <davem@redhat.com>
  139. VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
  140. Freeing unused kernel memory: 140k freed
  141. Please be patient, while OpenWrt loads ...
  142. - preinit -
  143. Press the [f] key and hit [enter] to enter failsafe mode
  144. - regular preinit -
  145. jffs2 not ready yet; using ramdisk
  146. mini_fo: using base directory: /
  147. mini_fo: using storage directory: /tmp/root
  148. - init -
  149.  
  150. Please press Enter to activate this console. CPU 0 Unable to handle kernel paging request at virtual address c00901ad, epc == 8012a9a8, ra == 8012a920
  151. Oops[#1]:
  152. Cpu 0
  153. $ 0   : 00000000 10008400 c00901ad 00020000
  154. $ 4   : fffe38c4 000038c4 fffe0000 808c9680
  155. $ 8   : 000200d2 802bc1ac 802bc1ac f7a2a66c
  156. $12   : 80ce8594 80ce8580 00000001 802b5de4
  157. $16   : 000638c3 00000004 00000000 c0149644
  158. $20   : 00002a71 00000007 000638c4 c0091000
  159. $24   : 00000000 8006f91c                  
  160. $28   : 808a4000 808a5a98 c0149000 8012a920
  161. Hi    : 00000000
  162. Lo    : 023de092
  163. epc   : 8012a9a8 unlzma+0xe5c/0xf90
  164.     Not tainted
  165. ra    : 8012a920 unlzma+0xdd4/0xf90
  166. Status: 10008403    KERNEL EXL IE
  167. Cause : 00800008
  168. BadVA : c00901ad
  169. PrId  : 00029010 (Broadcom BCM6338)
  170. Modules linked in:
  171. Process uci (pid: 231, threadinfo=808a4000, task=808b6a18, tls=00000000)
  172. Stack : 80323028 00000002 800bf494 8082ec00 00000004 00000025 0000001c 6d000200
  173.         00000000 00000200 00000000 801299d0 c006fe0c c006f000 c0078bc0 00009bc0
  174.         008a52e5 023de092 023de092 00000004 00000123 00000263 000002c7 00000000
  175.         c006f000 00000003 00000003 00000001 00000001 c0149644 c0149a68 c0149664
  176.         00000007 808e6108 80300000 00000028 8082eca0 00000000 00000000 c0078bc0
  177.         ...
  178. Call Trace:
  179. [<8012a9a8>] unlzma+0xe5c/0xf90
  180. [<800f1750>] lzma_uncompress+0x134/0x278
  181. [<800ed4fc>] squashfs_read_data+0x44c/0x62c
  182. [<800edda8>] squashfs_cache_get+0x1c4/0x2f4
  183. [<800eee5c>] squashfs_readpage+0x568/0x810
  184. [<80075be4>] __do_page_cache_readahead+0x1cc/0x238
  185. [<80075c78>] ra_submit+0x28/0x34
  186. [<80076164>] page_cache_sync_readahead+0x4c/0x58
  187. [<8006f07c>] generic_file_aio_read+0x280/0x6ec
  188. [<8009951c>] do_sync_read+0xd4/0x13c
  189. [<800f4d00>] mini_fo_read+0x88/0x168
  190. [<8009a2d4>] vfs_read+0xac/0x170
  191. [<8009a48c>] sys_read+0x58/0xa0
  192. [<80012210>] stack_done+0x20/0x3c
  193.  
  194.  
  195. Code: 5040fffe  00832021  02e41021 <90500000> 02f41021  a0500000  8fa400bc  1080000d  26940001
  196. Disabling lock debugging due to kernel taint
  197.  
  198.  
  199. CFE version 1.0.37-6.5.17 for BCM96338 (32bit,SP,BE)
  200. Copyright (C) 2000-2005 Broadcom Corporation.
  201.  
  202. Boot Address 0xbfc00000
  203.  
  204. Initializing Arena.
  205. Initializing Devices.
  206. Parallel flash device: name AM29LV320MB, id 0x2200, size 4096KB
  207. error on Ethernet Switch setup
  208. Failed initializing enet hardware
  209. CPU type 0x29010: 240MHz
  210. Total memory: 16777216 bytes (16MB)
  211.  
  212. Total memory used by CFE:  0x80401000 - 0x805283F0 (1209328)
  213. Initialized Data:          0x8041D7F0 - 0x8041FA50 (8800)
  214. BSS Area:                  0x8041FA50 - 0x804263F0 (27040)
  215. Local Heap:                0x804263F0 - 0x805263F0 (1048576)
  216. Stack Area:                0x805263F0 - 0x805283F0 (8192)
  217. Text (code) segment:       0x80401000 - 0x8041D7E8 (116712)
  218. Boot area (physical):      0x00529000 - 0x00569000
  219. Relocation Factor:         I:00000000 - D:00000000
  220.  
  221. Board IP address                  : 192.168.1.1  
  222. Host IP address                   : 192.168.1.100  
  223. Gateway IP address                :  
  224. Run from flash/host (f/h)         : f  
  225. Default host run file name        : vmlinux  
  226. Default host flash file name      : bcm963xx_fs_kernel  
  227. Boot delay (0-9 seconds)          : 3  
  228. Board Id Name                     : 96338W  
  229. Psi size in KB                    : 24
  230. Number of MAC Addresses (1-32)    : 2  
  231. Base MAC Address                  : 00:11:22:33:44:55  
  232. Ethernet PHY Type                 : External Switch Using Reverse MII
  233. Memory size in MB                 : 16
  234. CMT Thread Number                 : 0
  235. Dying Gasp Enable (0:Disable 1:Enable)  : 0
  236.  
  237. Could not activate network interface 'eth0': CFE error -1
  238. *** Press Enter to stop auto run (3 seconds) ***
  239. Auto run second count down: 0
  240. Code Address: 0x80010000, Entry Address: 0x80010000
  241. Decompression OK!
  242. Entry at 0x80010000
  243. Starting program at 0x80010000
  244. Linux version 2.6.32.10 (al@al-desktop) (gcc version 4.3.3 (GCC) ) #3 Thu Apr 1 10:38:13 BST 2010
  245. Detected Broadcom 0x6338 CPU revision a2
  246. CPU frequency is 240 MHz
  247. 16MB of RAM installed
  248. registering 8 GPIOs
  249. board_bcm963xx: CFE version: 1.0.37-6.5
  250. bootconsole [early0] enabled
  251. CPU revision is: 00029010 (Broadcom BCM6338)
  252. board_bcm963xx: board name: 96338W
  253. Determined physical RAM map:
  254.  memory: 01000000 @ 00000000 (usable)
  255. Initrd not found or empty - disabling initrd
  256. Zone PFN ranges:
  257.   Normal   0x00000000 -> 0x00001000
  258. Movable zone start PFN for each node
  259. early_node_map[1] active PFN ranges
  260.     0: 0x00000000 -> 0x00001000
  261. Built 1 zonelists in Zone order, mobility grouping off.  Total pages: 4064
  262. Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
  263. PID hash table entries: 64 (order: -4, 256 bytes)
  264. Dentry cache hash table entries: 2048 (order: 1, 8192 bytes)
  265. Inode-cache hash table entries: 1024 (order: 0, 4096 bytes)
  266. Primary instruction cache 16kB, VIPT, 2-way, linesize 16 bytes.
  267. Primary data cache 8kB, 2-way, VIPT, no aliases, linesize 16 bytes
  268. Memory: 13156k/16384k available (2144k kernel code, 3228k reserved, 593k data, 140k init, 0k highmem)
  269. Hierarchical RCU implementation.
  270. NR_IRQS:128
  271. Calibrating delay loop... 239.10 BogoMIPS (lpj=478208)
  272. Mount-cache hash table entries: 512
  273. NET: Registered protocol family 16
  274. bio: create slab <bio-0> at 0
  275. Switching to clocksource MIPS
  276. NET: Registered protocol family 2
  277. IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  278. TCP established hash table entries: 512 (order: 0, 4096 bytes)
  279. TCP bind hash table entries: 512 (order: -1, 2048 bytes)
  280. TCP: Hash tables configured (established 512 bind 512)
  281. TCP reno registered
  282. NET: Registered protocol family 1
  283. audit: initializing netlink socket (disabled)
  284. type=2000 audit(0.236:1): initialized
  285. squashfs: version 4.0 (2009/01/31) Phillip Lougher
  286. Registering mini_fo version $Id$
  287. JFFS2 version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
  288. msgmni has been set to 25
  289. io scheduler noop registered
  290. io scheduler deadline registered (default)
  291. gpiodev: gpio device registered with major 254
  292. gpiodev: gpio platform device registered with access mask FFFFFFFF
  293. bcm63xx_uart.0: ttyS0 at MMIO 0xfffe0300 (irq = 10) is a bcm63xx_uart
  294. console [ttyS0] enabled, bootconsole disabled
  295. console [ttyS0] enabled, bootconsole disabled
  296. bcm963xx_flash: 0x00400000 at 0x1fc00000
  297. bcm963xx: Found 1 x16 devices at 0x0 in 16-bit bank
  298.  Amd/Fujitsu Extended Query Table at 0x0040
  299. number of CFI chips: 1
  300. cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
  301. bcm963xx_flash: Read Signature value of CFE1CFE1
  302. bcm963xx_flash: CFE bootloader detected
  303. bcm963xx_flash: CFE boot tag found with version 6, board type 6338W, and tagid bccfe.
  304. bcm963xx_flash: Partition 0 is CFE offset 80c76a20 and length 0
  305. bcm963xx_flash: Partition 1 is kernel offset c77 and length 0
  306. bcm963xx_flash: Partition 2 is rootfs offset cb8 and length 0
  307. bcm963xx_flash: Partition 3 is nvram offset cf9 and length 0
  308. bcm963xx_flash: Partition 4 is linux offset d39 and length 0
  309. bcm963xx_flash: Spare partition is 270000 offset and length 180000
  310. Creating 5 MTD partitions on "bcm963xx":
  311. 0x000000000000-0x000000010000 : "CFE"
  312. 0x000000010100-0x000000100000 : "kernel"
  313. mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
  314. 0x000000100000-0x0000003f0000 : "rootfs"
  315. mtd: partition "rootfs" set to be root filesystem
  316. mtd: partition "rootfs_data" created automatically, ofs=270000, len=180000
  317. 0x000000270000-0x0000003f0000 : "rootfs_data"
  318. 0x0000003f0000-0x000000400000 : "nvram"
  319. 0x000000010000-0x0000003f0000 : "linux"
  320. bcm63xx_wdt started, timer margin: 30 sec
  321. Registered led device: adsl
  322. Registered led device: ses
  323. Registered led device: ppp-fail
  324. Registered led device: power
  325. Registered led device: stop
  326. TCP westwood registered
  327. NET: Registered protocol family 17
  328. 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
  329. All bugs added by David S. Miller <davem@redhat.com>
  330. VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
  331. Freeing unused kernel memory: 140k freed
  332. Please be patient, while OpenWrt loads ...
  333. - preinit -
  334. Press the [f] key and hit [enter] to enter failsafe mode
  335. f
  336. - failsafe -
  337.  
  338.  
  339. BusyBox v1.15.3 (2010-04-01 05:48:45 BST) built-in shell (ash)
  340. Enter 'help' for a list of built-in commands.
  341.  
  342.   _______                     ________        __
  343.  |       |.-----.-----.-----.|  |  |  |.----.|  |_
  344.  |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
  345.  |_______||   __|_____|__|__||________||__|  |____|
  346.           |__| W I R E L E S S   F R E E D O M
  347.  KAMIKAZE (bleeding edge, r20642) ------------------
  348.   * 10 oz Vodka       Shake well with ice and strain
  349.   * 10 oz Triple sec  mixture into 10 shot glasses.
  350.   * 10 oz lime juice  Salute!
  351.  ---------------------------------------------------
  352. root@(none):/# firstboot
  353. mini_fo: using base directory: /
  354. mini_fo: using storage directory: /overlay
  355. root@(none):/# sync
  356. root@(none):/# sync
  357. root@(none):/# sync
  358. root@(none):/# kexec
  359. CPU 0 Unable to handle kernel paging request at virtual address c009094b, epc == 8012a9a8, ra == 8012a920
  360. Oops[#1]:
  361. Cpu 0
  362. $ 0   : 00000000 10008400 c009094b 00020000
  363. $ 4   : fffe19d0 000019d0 fffe0000 80fb5380
  364. $ 8   : 000200d2 802bc1ac 802bc1ac 4e6b9b94
  365. $12   : 80cf4594 80cf4580 00000001 802b5de4
  366. $16   : 000019cf 00000005 00000000 c0143644
  367. $20   : 0000131b 00000007 000019d0 c0091000
  368. $24   : 00000002 8006f91c                  
  369. $28   : 8083c000 8083da98 c0143000 8012a920
  370. Hi    : 00000000
  371. Lo    : 0894cdcb
  372. epc   : 8012a9a8 unlzma+0xe5c/0xf90
  373.     Not tainted
  374. ra    : 8012a920 unlzma+0xdd4/0xf90
  375. Status: 10008403    KERNEL EXL IE
  376. Cause : 00800008
  377. BadVA : c009094b
  378. PrId  : 00029010 (Broadcom BCM6338)
  379. Modules linked in:
  380. Process kexec (pid: 238, threadinfo=8083c000, task=80c364f0, tls=00000000)
  381. Stack : 80323028 00000002 800bf494 80833000 00000005 00000019 0000001f 6d000200
  382.         00000000 000001e2 f3000000 801299d0 c006f6e6 c006f000 c0079dc2 0000adc2
  383.         0851fc8f 0cd32c12 0894cdcb 00000004 00000002 00000059 000000f0 00000000
  384.         c006f000 00000003 00000003 00000001 00000003 c0143644 c0143a68 c0143664
  385.         00000007 80c78b08 80300000 0000002d 808330b4 00000000 00000000 c0079dc2
  386.         ...
  387. Call Trace:
  388. [<8012a9a8>] unlzma+0xe5c/0xf90
  389. [<800f1750>] lzma_uncompress+0x134/0x278
  390. [<800ed4fc>] squashfs_read_data+0x44c/0x62c
  391. [<800edda8>] squashfs_cache_get+0x1c4/0x2f4
  392. [<800eee9c>] squashfs_readpage+0x5a8/0x810
  393. [<80075be4>] __do_page_cache_readahead+0x1cc/0x238
  394. [<80075c78>] ra_submit+0x28/0x34
  395. [<80076164>] page_cache_sync_readahead+0x4c/0x58
  396. [<8006f07c>] generic_file_aio_read+0x280/0x6ec
  397. [<8009951c>] do_sync_read+0xd4/0x13c
  398. [<800f4d00>] mini_fo_read+0x88/0x168
  399. [<8009a2d4>] vfs_read+0xac/0x170
  400. [<8009a48c>] sys_read+0x58/0xa0
  401. [<80012210>] stack_done+0x20/0x3c
  402.  
  403.  
  404. Code: 5040fffe  00832021  02e41021 <90500000> 02f41021  a0500000  8fa400bc  1080000d  26940001
  405. Disabling lock debugging due to kernel taint
  406. root@(none):/#
  407.  
  408. CFE version 1.0.37-6.5.17 for BCM96338 (32bit,SP,BE)
  409. Copyright (C) 2000-2005 Broadcom Corporation.
  410.  
  411. Boot Address 0xbfc00000
  412.  
  413. Initializing Arena.
  414. Initializing Devices.
  415. Parallel flash device: name AM29LV320MB, id 0x2200, size 4096KB
  416. error on Ethernet Switch setup
  417. Failed initializing enet hardware
  418. CPU type 0x29010: 240MHz
  419. Total memory: 16777216 bytes (16MB)
  420.  
  421. Total memory used by CFE:  0x80401000 - 0x805283F0 (1209328)
  422. Initialized Data:          0x8041D7F0 - 0x8041FA50 (8800)
  423. BSS Area:                  0x8041FA50 - 0x804263F0 (27040)
  424. Local Heap:                0x804263F0 - 0x805263F0 (1048576)
  425. Stack Area:                0x805263F0 - 0x805283F0 (8192)
  426. Text (code) segment:       0x80401000 - 0x8041D7E8 (116712)
  427. Boot area (physical):      0x00529000 - 0x00569000
  428. Relocation Factor:         I:00000000 - D:00000000
  429.  
  430. Board IP address                  : 192.168.1.1  
  431. Host IP address                   : 192.168.1.100  
  432. Gateway IP address                :  
  433. Run from flash/host (f/h)         : f  
  434. Default host run file name        : vmlinux  
  435. Default host flash file name      : bcm963xx_fs_kernel  
  436. Boot delay (0-9 seconds)          : 3  
  437. Board Id Name                     : 96338W  
  438. Psi size in KB                    : 24
  439. Number of MAC Addresses (1-32)    : 2  
  440. Base MAC Address                  : 00:11:22:33:44:55  
  441. Ethernet PHY Type                 : External Switch Using Reverse MII
  442. Memory size in MB                 : 16
  443. CMT Thread Number                 : 0
  444. Dying Gasp Enable (0:Disable 1:Enable)  : 0
  445.  
  446. Could not activate network interface 'eth0': CFE error -1
  447. *** Press Enter to stop auto run (3 seconds) ***
  448. Auto run second count down: 0
  449. Code Address: 0x80010000, Entry Address: 0x80010000
  450. Decompression OK!
  451. Entry at 0x80010000
  452. Starting program at 0x80010000
  453. Linux version 2.6.32.10 (al@al-desktop) (gcc version 4.3.3 (GCC) ) #3 Thu Apr 1 10:38:13 BST 2010
  454. Detected Broadcom 0x6338 CPU revision a2
  455. CPU frequency is 240 MHz
  456. 16MB of RAM installed
  457. registering 8 GPIOs
  458. board_bcm963xx: CFE version: 1.0.37-6.5
  459. bootconsole [early0] enabled
  460. CPU revision is: 00029010 (Broadcom BCM6338)
  461. board_bcm963xx: board name: 96338W
  462. Determined physical RAM map:
  463.  memory: 01000000 @ 00000000 (usable)
  464. Initrd not found or empty - disabling initrd
  465. Zone PFN ranges:
  466.   Normal   0x00000000 -> 0x00001000
  467. Movable zone start PFN for each node
  468. early_node_map[1] active PFN ranges
  469.     0: 0x00000000 -> 0x00001000
  470. Built 1 zonelists in Zone order, mobility grouping off.  Total pages: 4064
  471. Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
  472. PID hash table entries: 64 (order: -4, 256 bytes)
  473. Dentry cache hash table entries: 2048 (order: 1, 8192 bytes)
  474. Inode-cache hash table entries: 1024 (order: 0, 4096 bytes)
  475. Primary instruction cache 16kB, VIPT, 2-way, linesize 16 bytes.
  476. Primary data cache 8kB, 2-way, VIPT, no aliases, linesize 16 bytes
  477. Memory: 13156k/16384k available (2144k kernel code, 3228k reserved, 593k data, 140k init, 0k highmem)
  478. Hierarchical RCU implementation.
  479. NR_IRQS:128
  480. Calibrating delay loop... 239.10 BogoMIPS (lpj=478208)
  481. Mount-cache hash table entries: 512
  482. NET: Registered protocol family 16
  483. bio: create slab <bio-0> at 0
  484. Switching to clocksource MIPS
  485. NET: Registered protocol family 2
  486. IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  487. TCP established hash table entries: 512 (order: 0, 4096 bytes)
  488. TCP bind hash table entries: 512 (order: -1, 2048 bytes)
  489. TCP: Hash tables configured (established 512 bind 512)
  490. TCP reno registered
  491. NET: Registered protocol family 1
  492. audit: initializing netlink socket (disabled)
  493. type=2000 audit(0.236:1): initialized
  494. squashfs: version 4.0 (2009/01/31) Phillip Lougher
  495. Registering mini_fo version $Id$
  496. JFFS2 version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
  497. msgmni has been set to 25
  498. io scheduler noop registered
  499. io scheduler deadline registered (default)
  500. gpiodev: gpio device registered with major 254
  501. gpiodev: gpio platform device registered with access mask FFFFFFFF
  502. bcm63xx_uart.0: ttyS0 at MMIO 0xfffe0300 (irq = 10) is a bcm63xx_uart
  503. console [ttyS0] enabled, bootconsole disabled
  504. console [ttyS0] enabled, bootconsole disabled
  505. bcm963xx_flash: 0x00400000 at 0x1fc00000
  506. bcm963xx: Found 1 x16 devices at 0x0 in 16-bit bank
  507.  Amd/Fujitsu Extended Query Table at 0x0040
  508. number of CFI chips: 1
  509. cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
  510. bcm963xx_flash: Read Signature value of CFE1CFE1
  511. bcm963xx_flash: CFE bootloader detected
  512. bcm963xx_flash: CFE boot tag found with version 6, board type 6338W, and tagid bccfe.
  513. bcm963xx_flash: Partition 0 is CFE offset 80c76a20 and length 0
  514. bcm963xx_flash: Partition 1 is kernel offset c77 and length 0
  515. bcm963xx_flash: Partition 2 is rootfs offset cb8 and length 0
  516. bcm963xx_flash: Partition 3 is nvram offset cf9 and length 0
  517. bcm963xx_flash: Partition 4 is linux offset d39 and length 0
  518. bcm963xx_flash: Spare partition is 270000 offset and length 180000
  519. Creating 5 MTD partitions on "bcm963xx":
  520. 0x000000000000-0x000000010000 : "CFE"
  521. 0x000000010100-0x000000100000 : "kernel"
  522. mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
  523. 0x000000100000-0x0000003f0000 : "rootfs"
  524. mtd: partition "rootfs" set to be root filesystem
  525. mtd: partition "rootfs_data" created automatically, ofs=270000, len=180000
  526. 0x000000270000-0x0000003f0000 : "rootfs_data"
  527. 0x0000003f0000-0x000000400000 : "nvram"
  528. 0x000000010000-0x0000003f0000 : "linux"
  529. bcm63xx_wdt started, timer margin: 30 sec
  530. Registered led device: adsl
  531. Registered led device: ses
  532. Registered led device: ppp-fail
  533. Registered led device: power
  534. Registered led device: stop
  535. TCP westwood registered
  536. NET: Registered protocol family 17
  537. 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
  538. All bugs added by David S. Miller <davem@redhat.com>
  539. VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
  540. Freeing unused kernel memory: 140k freed
  541. Please be patient, while OpenWrt loads ...
  542. - preinit -
  543. Press the [f] key and hit [enter] to enter failsafe mode
  544. - regular preinit -
  545. switching to jffs2
  546. mini_fo: using base directory: /
  547. mini_fo: using storage directory: /overlay
  548. - init -
  549.  
  550. Please press Enter to activate this console. CPU 0 Unable to handle kernel paging request at virtual address c00901ad, epc == 8012a9a8, ra == 8012a920
  551. Oops[#1]:
  552. Cpu 0
  553. $ 0   : 00000000 10008400 c00901ad 00020000
  554. $ 4   : fffe38c4 000038c4 fffe0000 808f0500
  555. $ 8   : 000200d2 802bc1ac 802bc1ac f7a2a66c
  556. $12   : 80cf4594 80cf4580 00000001 802b5de4
  557. $16   : 000638c3 00000004 00000000 c0149644
  558. $20   : 00002a71 00000007 000638c4 c0091000
  559. $24   : 00000000 8006f91c                  
  560. $28   : 808c6000 808c7a98 c0149000 8012a920
  561. Hi    : 00000000
  562. Lo    : 023de092
  563. epc   : 8012a9a8 unlzma+0xe5c/0xf90
  564.     Not tainted
  565. ra    : 8012a920 unlzma+0xdd4/0xf90
  566. Status: 10008403    KERNEL EXL IE
  567. Cause : 00800008
  568. BadVA : c00901ad
  569. PrId  : 00029010 (Broadcom BCM6338)
  570. Modules linked in:
  571. Process uci (pid: 237, threadinfo=808c6000, task=808c3590, tls=00000000)
  572. Stack : 80323028 00000002 800bf494 80831c00 00000004 00000025 0000001c 6d000200
  573.         00000000 00000200 00000000 801299d0 c006fe0c c006f000 c0078bc0 00009bc0
  574.         008a52e5 023de092 023de092 00000004 00000123 00000263 000002c7 00000000
  575.         c006f000 00000003 00000003 00000001 00000001 c0149644 c0149a68 c0149664
  576.         00000007 808fe108 80300000 00000028 80831ca0 00000000 00000000 c0078bc0
  577.         ...
  578. Call Trace:
  579. [<8012a9a8>] unlzma+0xe5c/0xf90
  580. [<800f1750>] lzma_uncompress+0x134/0x278
  581. [<800ed4fc>] squashfs_read_data+0x44c/0x62c
  582. [<800edda8>] squashfs_cache_get+0x1c4/0x2f4
  583. [<800eee5c>] squashfs_readpage+0x568/0x810
  584. [<80075be4>] __do_page_cache_readahead+0x1cc/0x238
  585. [<80075c78>] ra_submit+0x28/0x34
  586. [<80076164>] page_cache_sync_readahead+0x4c/0x58
  587. [<8006f07c>] generic_file_aio_read+0x280/0x6ec
  588. [<8009951c>] do_sync_read+0xd4/0x13c
  589. [<800f4d00>] mini_fo_read+0x88/0x168
  590. [<8009a2d4>] vfs_read+0xac/0x170
  591. [<8009a48c>] sys_read+0x58/0xa0
  592. [<80012210>] stack_done+0x20/0x3c
  593.  
  594.  
  595. Code: 5040fffe  00832021  02e41021 <90500000> 02f41021  a0500000  8fa400bc  1080000d  26940001
  596. Disabling lock debugging due to kernel taint
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!