API tools faq
paste
Advertisement
RobertBerger

poky-1.1-beta-e3c5d7a90ae179a-bb-xm-rev-c

RobertBerger
Sep 28th, 2011
240
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 14.49 KB | None | 0 0
raw download clone embed print report
  1. Texas Instruments X-Loader 1.5.0 (Sep 28 2011 - 02:50:26)
  2. Beagle xM
  3. Reading boot sector
  4. Loading u-boot.bin from mmc
  5.  
  6.  
  7. U-Boot 2011.06 (Sep 28 2011 - 02:54:31)
  8.  
  9. OMAP3630/3730-GP ES2.1, CPU-OPP2, L3-165MHz, Max CPU Clock 1 Ghz
  10. OMAP3 Beagle board + LPDDR/NAND
  11. I2C: ready
  12. DRAM: 512 MiB
  13. NAND: 0 MiB
  14. MMC: OMAP SD/MMC: 0
  15. *** Warning - readenv() failed, using default environment
  16.  
  17. In: serial
  18. Out: serial
  19. Err: serial
  20. Beagle unknown 0x02
  21. No EEPROM on expansion board
  22. Die ID #1c0400229ff800000163810c0f033025
  23. Hit any key to stop autoboot: 0
  24. OMAP3 beagleboard.org #
  25. OMAP3 beagleboard.org #
  26. OMAP3 beagleboard.org #
  27. OMAP3 beagleboard.org # sete console "ttyO2,115200n8"
  28. OMAP3 beagleboard.org # sete sd_boot "mmc rescan ${mmcdev}; run loadbootscript; run bootscript; run loaduimage; run mmcboot;"
  29. OMAP3 beagleboard.org #
  30. OMAP3 beagleboard.org # run sd_boot
  31. ## Error: "loadbootscript" not defined
  32. ## Error: "bootscript" not defined
  33. reading uImage
  34.  
  35. 2809656 bytes read
  36. Booting from mmc ...
  37. ## Booting kernel from Legacy Image at 82000000 ...
  38. Image Name: Linux-2.6.37.6-yocto-standard+
  39. Image Type: ARM Linux Kernel Image (uncompressed)
  40. Data Size: 2809592 Bytes = 2.7 MiB
  41. Load Address: 80008000
  42. Entry Point: 80008000
  43. Verifying Checksum ... OK
  44. Loading Kernel Image ... OK
  45. OK
  46.  
  47. Starting kernel ...
  48.  
  49. Uncompressing Linux... done, booting the kernel.
  50. Initializing cgroup subsys cpuset
  51. Initializing cgroup subsys cpu
  52. Linux version 2.6.37.6-yocto-standard+ (rber@yocto-1) (gcc version 4.6.1 20110627 (prerelease) (GCC) ) #1 PREEMPT Wed Sep 28 01:00:16 EEST 2011
  53. CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f
  54. CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
  55. Machine: OMAP3 Beagle Board
  56. Reserving 12582912 bytes SDRAM for VRAM
  57. Memory policy: ECC disabled, Data cache writeback
  58. OMAP3630 ES1.2 (l2cache iva sgx neon isp 192mhz_clk )
  59. SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x10000
  60. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 126976
  61. Kernel command line: console=ttyO2,115200n8 mpurate=auto vram=12M omapfb.mode=dvi:1024x768MR-16@60 omapfb.debug=y omapdss.def_disp=dvi root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait
  62. PID hash table entries: 2048 (order: 1, 8192 bytes)
  63. Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  64. Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  65. allocated 2621440 bytes of page_cgroup
  66. please try 'cgroup_disable=memory' option if you don't want memory cgroups
  67. Memory: 500MB = 500MB total
  68. Memory: 498700k/498700k available, 25588k reserved, 0K highmem
  69. Virtual kernel memory layout:
  70. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  71. fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  72. DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
  73. vmalloc : 0xe0800000 - 0xf8000000 ( 376 MB)
  74. lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
  75. modules : 0xbf000000 - 0xc0000000 ( 16 MB)
  76. .init : 0xc0008000 - 0xc0056000 ( 312 kB)
  77. .text : 0xc0056000 - 0xc0573afc (5239 kB)
  78. .data : 0xc0574000 - 0xc05c9700 ( 342 kB)
  79. SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  80. Preemptable hierarchical RCU implementation.
  81. NR_IRQS:402
  82. Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz
  83. Reprogramming SDRC clock to 332000000 Hz
  84. GPMC revision 5.0
  85. IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
  86. Total of 96 interrupts on 1 active controller
  87. OMAP clockevent source: GPTIMER12 at 32768 Hz
  88. Console: colour dummy device 80x30
  89. Calibrating delay loop... 500.97 BogoMIPS (lpj=1953792)
  90. pid_max: default: 32768 minimum: 301
  91. Security Framework initialized
  92. Mount-cache hash table entries: 512
  93. Initializing cgroup subsys debug
  94. Initializing cgroup subsys ns
  95. ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
  96. Initializing cgroup subsys cpuacct
  97. Initializing cgroup subsys memory
  98. Initializing cgroup subsys devices
  99. Initializing cgroup subsys freezer
  100. Initializing cgroup subsys blkio
  101. CPU: Testing write buffer coherency: ok
  102. ftrace: allocating 16422 entries in 33 pages
  103. devtmpfs: initialized
  104. regulator: core version 0.5
  105. regulator: dummy:
  106. NET: Registered protocol family 16
  107. OMAP GPIO hardware version 2.5
  108. OMAP GPIO hardware version 2.5
  109. OMAP GPIO hardware version 2.5
  110. OMAP GPIO hardware version 2.5
  111. OMAP GPIO hardware version 2.5
  112. OMAP GPIO hardware version 2.5
  113. omap_mux_init: Add partition: #1: core, flags: 0
  114. OMAP3 Beagle Rev: xM C
  115. Found NAND on CS0
  116. Registering NAND on CS0
  117. Unable to get DVI reset GPIO
  118. beagle_opp_init: turbo OPPs enabled!
  119. OMAP DMA hardware revision 5.0
  120. bio: create slab <bio-0> at 0
  121. SCSI subsystem initialized
  122. usbcore: registered new interface driver usbfs
  123. usbcore: registered new interface driver hub
  124. usbcore: registered new device driver usb
  125. omap_device: omap_i2c.1: new worst case activate latency 0: 30517
  126. omap_i2c omap_i2c.1: bus 1 rev4.0 at 2600 kHz
  127. twl4030: PIH (irq 7) chaining IRQs 368..375
  128. twl4030: power (irq 373) chaining IRQs 376..383
  129. twl4030: gpio (irq 368) chaining IRQs 384..401
  130. regulator: VUSB1V5: 1500 mV normal standby
  131. regulator: VUSB1V8: 1800 mV normal standby
  132. regulator: VUSB3V1: 3100 mV normal standby
  133. twl4030_usb twl4030_usb: Initialized TWL4030 USB module
  134. regulator: VMMC1: 1850 <--> 3150 mV at 3000 mV normal standby
  135. regulator: VDAC: 1800 mV normal standby
  136. regulator: VDVI: 1800 mV normal standby
  137. regulator: VSIM: 1800 <--> 3000 mV at 1800 mV normal standby
  138. omap_device: omap_i2c.1: new worst case deactivate latency 0: 30517
  139. omap_i2c omap_i2c.2: bus 2 rev4.0 at 400 kHz
  140. omap_i2c omap_i2c.3: bus 3 rev4.0 at 100 kHz
  141. Advanced Linux Sound Architecture Driver Version 1.0.23.
  142. Switching to clocksource 32k_counter
  143. musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=0
  144. musb_hdrc musb_hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92
  145. NET: Registered protocol family 2
  146. IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
  147. TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  148. TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
  149. TCP: Hash tables configured (established 16384 bind 16384)
  150. TCP reno registered
  151. UDP hash table entries: 256 (order: 0, 4096 bytes)
  152. UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  153. NET: Registered protocol family 1
  154. RPC: Registered udp transport module.
  155. RPC: Registered tcp transport module.
  156. RPC: Registered tcp NFSv4.1 backchannel transport module.
  157. VFS: Disk quotas dquot_6.5.2
  158. Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  159. msgmni has been set to 974
  160. Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  161. io scheduler noop registered
  162. io scheduler deadline registered
  163. io scheduler cfq registered (default)
  164. OMAP DSS rev 2.0
  165. OMAP DISPC rev 3.0
  166. OMAP VENC rev 2
  167. OMAP DSI rev 1.0
  168. Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  169. omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0
  170. omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1
  171. omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2
  172. console [ttyO2] enabled
  173. omap_uart.3: ttyO3 at MMIO 0x49042000 (irq = 80) is a OMAP UART3
  174. brd: module loaded
  175. omap2-nand driver initializing
  176. No NAND device found.
  177. No NAND device found.
  178. usbcore: registered new interface driver kaweth
  179. pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
  180. usbcore: registered new interface driver pegasus
  181. usbcore: registered new interface driver asix
  182. usbcore: registered new interface driver cdc_ether
  183. usbcore: registered new interface driver dm9601
  184. usbcore: registered new interface driver smsc75xx
  185. usbcore: registered new interface driver smsc95xx
  186. usbcore: registered new interface driver net1080
  187. usbcore: registered new interface driver cdc_subset
  188. usbcore: registered new interface driver zaurus
  189. usbcore: registered new interface driver MOSCHIP usb-ethernet driver
  190. usbcore: registered new interface driver int51x1
  191. cdc_ncm: 30-Nov-2010
  192. usbcore: registered new interface driver cdc_ncm
  193. console [netcon0] enabled
  194. netconsole: network logging started
  195. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  196. ehci-omap.0 supply hsusb0 not found, using dummy regulator
  197. ehci-omap.0 supply hsusb1 not found, using dummy regulator
  198. ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
  199. ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
  200. ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
  201. ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
  202. hub 1-0:1.0: USB hub found
  203. hub 1-0:1.0: 3 ports detected
  204. Initializing USB Mass Storage driver...
  205. usbcore: registered new interface driver usb-storage
  206. USB Mass Storage support registered.
  207. mice: PS/2 mouse device common for all mice
  208. twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
  209. OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
  210. cpuidle: using governor ladder
  211. cpuidle: using governor menu
  212. mmci-omap-hs: probe of mmci-omap-hs.1 failed with error -16
  213. usbcore: registered new interface driver usbhid
  214. usbhid: USB HID core driver
  215. OMAP3 Beagle/Devkit8000 SoC init
  216. asoc: twl4030-hifi <-> omap-mcbsp-dai.1 mapping ok
  217. ALSA device list:
  218. #0: omap3beagle
  219. TCP cubic registered
  220. NET: Registered protocol family 17
  221. Registering the dns_resolver key type
  222. VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
  223. ThumbEE CPU extension supported.
  224. Power Management for TI OMAP3.
  225. sr_init: No PMIC hook to init smartreflex
  226. smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized
  227. smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized
  228. SmartReflex Class3 initialized
  229. clock: disabling unused clocks to save power
  230. registered taskstats version 1
  231. fbcvt: 1024x768@60: CVT Name - .786M3-R
  232. Console: switching to colour frame buffer device 128x48
  233. mmc0: host does not support reading read-only switch. assuming write-enable.
  234. mmc0: new high speed SDHC card at address 0001
  235. mmcblk0: mmc0:0001 00000 7.60 GiB
  236. mmcblk0: p1 p2
  237. regulator_init_complete: incomplete constraints, leaving VDAC on
  238. twl_rtc twl_rtc: setting system clock to 2011-09-28 01:18:59 UTC (1317172739)
  239. EXT3-fs: barriers not enabled
  240. kjournald starting. Commit interval 5 seconds
  241. usb 1-2: new high speed USB device using ehci-omap and address 2
  242. EXT3-fs (mmcblk0p2): using internal journal
  243. EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode
  244. VFS: Mounted root (ext3 filesystem) on device 179:2.
  245. devtmpfs: mounted
  246. Freeing init memory: 312K
  247. INIT: version 2.88 bootinghub 1-2:1.0: USB hub found
  248.  
  249. hub 1-2:1.0: 5 ports detected
  250. usb 1-2.1: new high speed USB device using ehci-omap and address 3
  251. Starting udevsmsc95xx v1.0.4
  252. smsc95xx 1-2.1:1.0: usb0: register 'smsc95xx' at usb-ehci-omap.0-2.1, smsc95xx USB 2.0 Ethernet, 82:57:97:8c:bf:03
  253. udev[63]: starting version 164
  254.  
  255. NET: Registered protocol family 10
  256. Starting Bootlog daemon: usb0: link up, 100Mbps, full-duplex, lpa 0x4DE1
  257. bootlogd.
  258.  
  259. Yocto (Built by Poky 5.0) 1.0+snapshot-20110927 beagleboard ttyO2
  260.  
  261. beagleboard login: D-BUS per-session daemon address is: unix:abstract=/tmp/dbus-Myf9CxQmxZ,guid=58581610bb2a5bfee960414900000015
  262. gnome-keyring-daemon: Missing argument for --componentsgnome-keyring-daemon: Missing argument for --componentsGNOME_KEYRING_CONTROL=/tmp/keyring-920H3H
  263. SSH_AUTH_SOCK=/tmp/keyring-920H3H/ssh
  264. GPG_AGENT_INFO=/tmp/keyring-920H3H/gpg:0:1
  265. GNOME_KEYRING_PID=390
  266. GNOME_KEYRING_CONTROL=/tmp/keyring-TiNPLJ
  267. SSH_AUTH_SOCK=/tmp/keyring-TiNPLJ/ssh
  268. GPG_AGENT_INFO=/tmp/keyring-TiNPLJ/gpg:0:1
  269. GNOME_KEYRING_PID=392
  270. gnome-keyring-daemon: Missing argument for --componentsGNOME_KEYRING_CONTROL=/tmp/keyring-fCulvS
  271. SSH_AUTH_SOCK=/tmp/keyring-fCulvS/ssh
  272. GPG_AGENT_INFO=/tmp/keyring-fCulvS/gpg:0:1
  273. GNOME_KEYRING_PID=398
  274. gnome-keyring-daemon: Missing argument for --componentsGNOME_KEYRING_CONTROL=/tmp/keyring-P0eOEV
  275. SSH_AUTH_SOCK=/tmp/keyring-P0eOEV/ssh
  276. GPG_AGENT_INFO=/tmp/keyring-P0eOEV/gpg:0:1
  277. GNOME_KEYRING_PID=402
  278. matchbox: Cant find a keycode for keysym 269025056
  279. matchbox: ignoring key shortcut XF86Calendar=!$contacts
  280.  
  281. matchbox: Cant find a keycode for keysym 2809
  282. matchbox: ignoring key shortcut telephone=!$dates
  283.  
  284. matchbox: Cant find a keycode for keysym 269025050
  285. matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop
  286.  
  287. [settings daemon] Forking. run with -n to prevent fork
  288.  
  289. ** (matchbox-desktop:416): WARNING **: Error loading icon: Icon 'system-file-manager' not present in theme
  290.  
  291. ** (matchbox-desktop:416): WARNING **: Error loading icon: Icon 'preferences-desktop' not present in theme
  292.  
  293. ** (matchbox-desktop:416): WARNING **: Error loading icon: Icon 'computer' not present in theme
  294.  
  295. Yocto (Built by Poky 5.0) 1.0+snapshot-20110927 beagleboard ttyO2
  296.  
  297. beagleboard login: root
  298. root@beagleboard:~# ping 192.168.42.100
  299. PING 192.168.42.100 (192.168.42.100): 56 data bytes
  300. 64 bytes from 192.168.42.100: seq=0 ttl=64 time=0.824 ms
  301. 64 bytes from 192.168.42.100: seq=1 ttl=64 time=0.794 ms
  302. 64 bytes from 192.168.42.100: seq=2 ttl=64 time=0.763 ms
  303. 
  304. --- 192.168.42.100 ping statistics ---
  305. 3 packets transmitted, 3 packets received, 0% packet loss
  306. round-trip min/avg/max = 0.763/0.793/0.824 ms
  307.  
  308. root@beagleboard:~#
  309.  
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!