BMAX B5A Pro UEFI NVRAM setup variables

HIICrc32= 16E50539


Setup Question	= SSD Power Enable
Help String	= Enable or disable the power of SSD
Token	=7E7	// Do NOT change this line
Offset	=10
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         [01]SSD x1 : Test only.The item breaks WWAN,LAN,WLAN Pcie Slot
         *[02]SSD x2
         [03]SSD x4

Setup Question	= GPP8/9 Select
Help String	= Usage of GPP8/9
Token	=7FA	// Do NOT change this line
Offset	=5A
Width	=01
Options	=*[01]PCIE	// Move "*" to the desired Option
         [00]SATA

Setup Question	= HDD Power Enable
Help String	= Enable or disable the power of HDD
Token	=02	// Do NOT change this line
Offset	=0D
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         *[01]Enabled

Setup Question	= ODD Power Enable
Help String	= Enable or disable the power of ODD
Token	=7EC	// Do NOT change this line
Offset	=0E
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         *[01]Enabled

Setup Question	= Zero-Power ODD
Help String	= Enable/Disable Zero-Power ODD Feature
Token	=03	// Do NOT change this line
Offset	=0F
Width	=01
Options	=*[00]Disabled	// Move "*" to the desired Option
         [01]Enabled

Setup Question	= DT Slot Power Enable
Help String	= Enable or disable the power of DT SLOT
Token	=7DD	// Do NOT change this line
Offset	=12
Width	=01
Options	=*[00]Enabled (x1) (Lane 0)	// Move "*" to the desired Option
         [01]Enabled (x2) (Lane 0 + 1)
         [02]Enabled (x4)
         [03]Disabled

Setup Question	= WWAN Power Enable
Help String	= Enable or disable the power of WWAN
Token	=04	// Do NOT change this line
Offset	=15
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         *[01]Enabled
         [02]Manual

Setup Question	= LAN Power Enable
Help String	= Enable or disable LAN Power
Token	=05	// Do NOT change this line
Offset	=14
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         *[01]Enabled
         [02]Manual

Setup Question	= WLAN/WIFI Power Enable
Help String	= Enable or disable the power of WLAN/WIFI
Token	=06	// Do NOT change this line
Offset	=13
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         *[01]Enabled
         [02]Manual

Setup Question	= Keep Wlan Power In S3/S4 state
Help String	= Enable or disable the Wlan Power In S3/S4 state
Token	=07	// Do NOT change this line
Offset	=81
Width	=01
Options	=*[00]Disabled	// Move "*" to the desired Option
         [01]Enable Wlan Power In S3
         [02]Enable Wlan Power In S4
         [03]Enable Wlan Power In S3 And S4

Setup Question	= Front Camera 0 Enable
Help String	= Enable or disable the power of FRONT CAMERA 0
Token	=08	// Do NOT change this line
Offset	=17
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         *[01]Enabled

Setup Question	= Front Camera 1 Enable
Help String	= Enable or disable the power of FRONT CAMERA 1
Token	=09	// Do NOT change this line
Offset	=18
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         *[01]Enabled

Setup Question	= USB Camera Enable
Help String	= Enable or disable the power of USB CAMERA
Token	=0A	// Do NOT change this line
Offset	=52
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         *[01]Enabled

Setup Question	= EVAL Slot Power Enable
Help String	= Enable or disable the power of EVAL Slot
Token	=0B	// Do NOT change this line
Offset	=16
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         *[01]Enabled

Setup Question	= Allocate 100KB for MP2 customize request
Help String	= Enable option to allocate 100KB for MP2 customize request
Token	=0C	// Do NOT change this line
Offset	=83
Width	=01
Options	=*[0F]Auto	// Move "*" to the desired Option
         [01]Enabled
         [00]Disabled

Setup Question	= Power Sensors Routing Select
Help String	= Enable or disable Power Sensors Routing Select
Token	=80C	// Do NOT change this line
Offset	=53
Width	=01
Options	=*[00]WALLE lite PDT	// Move "*" to the desired Option
         [01]WALLE lite PM log

Setup Question	= MP2 FW Selection
Help String	= Select which MP2 FW to load
Token	=80D	// Do NOT change this line
Offset	=41
Width	=01
Options	=*[00]MP2_SFH	// Move "*" to the desired Option
         [01]MP2_WalleLite

Setup Question	= EVAL CARD T-Diode Routing Select
Help String	= Select which APU eSPI port route to EC
Token	=0D	// Do NOT change this line
Offset	=57
Width	=01
Options	=*[00]EC	// Move "*" to the desired Option
         [01]APU SMBUS0

Setup Question	= Special Display Features
Help String	= Enable/Disable HybridGraphics
Token	=7DE	// Do NOT change this line
Offset	=04
Width	=01
Options	=*[00]Disabled	// Move "*" to the desired Option
         [04]HybridGraphics

Setup Question	= D3Cold Support
Help String	= Enable/Disable PCIe x8 Slot D3Cold
Token	=0E	// Do NOT change this line
Offset	=3E
Width	=01
Options	=*[00]Disabled	// Move "*" to the desired Option
         [01]Enabled
         [02]Dummy D3Cold

Setup Question	= NVIDIA DGPU Power Enable
Help String	= For NVIDIA mobile DGPU card only. Output DGPU_EN# A19 pin and DGPU_SEL# B17 pin to high at every power on state.
Token	=0F	// Do NOT change this line
Offset	=62
Width	=01
Options	=*[00]Disabled	// Move "*" to the desired Option
         [01]Enabled

Setup Question	= Discrete GPU Hotplug Mode
Help String	= Select Discrete GPU Hotplug Mode - HotplugEnhanced or HotplugBasic
Token	=10	// Do NOT change this line
Offset	=2E
Width	=01
Options	=[00]Basic Mode	// Move "*" to the desired Option
         *[01]Enhanced Mode

Setup Question	= Discrete GPU D3Cold HPD Support
Help String	= Enable/Disable Discrete GPU D3Cold HPD function
Token	=11	// Do NOT change this line
Offset	=5C
Width	=01
Options	=*[00]Disabled	// Move "*" to the desired Option
         [01]Enabled

Setup Question	= PME Turn Off Support
Help String	= Enable to support sending PME_Turn_Off message to Discrete GPU when going to D3Cold
Token	=12	// Do NOT change this line
Offset	=5D
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         *[01]Enabled

Setup Question	= D3Cold Force Gen1
Help String	= Force Discrete GPU to Gen1 before entering D3Cold (before sending PME_Turn_Off message)
Token	=13	// Do NOT change this line
Offset	=68
Width	=01
Options	=*[00]Disabled	// Move "*" to the desired Option
         [01]Enabled

Setup Question	= Discrete GPU _DSM Function A
Help String	= PCI-SIG ECN _DSM Function A for Discrete GPU's GPP bridge.
Token	=14	// Do NOT change this line
Offset	=69
Width	=01
Options	=*[00]Disabled	// Move "*" to the desired Option
         [01]Enabled

Setup Question	= Discrete GPU _DSM Function B
Help String	= PCI-SIG ECN _DSM Function B for Discrete GPU's GPP bridge.
Token	=15	// Do NOT change this line
Offset	=6A
Width	=01
Options	=*[00]Disabled	// Move "*" to the desired Option
         [01]Enabled

Setup Question	= Non-Eval Discrete GPU Support
Help String	= Enable to support Non-Eval Discrete GPU that doesn't have specific EVAL_PWRGD(B30), EVAL_PRESENT#(A5)
Token	=16	// Do NOT change this line
Offset	=40
Width	=01
Options	=*[00]Disabled	// Move "*" to the desired Option
         [01]Enabled

Setup Question	= Discrete GPU HPD Circuitry
Help String	= Enable/Disable Discrete GPU Display HPD Circuitry
Token	=17	// Do NOT change this line
Offset	=2F
Width	=01
Options	=*[00]OR Circuitry	// Move "*" to the desired Option
         [01]Pulse Circuitry

Setup Question	= Discrete GPU's Audio
Help String	= Disable Discrete GPU's Audio or keep its ROM strap setting
Token	=18	// Do NOT change this line
Offset	=05
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         *[01]Keep ROM Strap Setting

Setup Question	= Discrete GPU's USB Port
Help String	= Disable Discrete GPU's USB Port or keep default setting
Token	=19	// Do NOT change this line
Offset	=63
Width	=01
Options	=*[00]Keep Default Setting	// Move "*" to the desired Option
         [01]Disabled

Setup Question	= Discrete GPU's SSID/SVID
Help String	= Program Discrete GPU's SSID/SVID depends on HybridGraphics setting
Token	=802	// Do NOT change this line
Offset	=6C
Width	=01
Options	=[00]Keep Default Setting	// Move "*" to the desired Option
         *[01]Program by Vendor

Setup Question	=  Discrete GPU's VGA SSID/SVID
Help String	= Overwrite Discrete GPU's VGA SSID/SVID. Default value 0 means depends on HybridGraphics setting.
Token	=1A	// Do NOT change this line
Offset	=78
Width	=04
Value	=0

Setup Question	=  Discrete GPU's AUDIO SSID/SVID
Help String	= Overwrite Discrete GPU's AUDIO SSID/SVID. Default value 0 means depends on HybridGraphics setting.
Token	=1B	// Do NOT change this line
Offset	=7C
Width	=04
Value	=0

Setup Question	= Discrete GPU BOMACO Support
Help String	= Enable/Disable Discrete GPU BOMACO Support
Token	=7E4	// Do NOT change this line
Offset	=30
Width	=01
Options	=*[00]Disabled	// Move "*" to the desired Option
         [01]Enabled

Setup Question	= MACO-PWR Timing   (us)
Help String	= MACO-PWR Timing: MACO_EN assert to PWR_EN deassert
Token	=1C	// Do NOT change this line
Offset	=31
Width	=01
Value	=<10>

Setup Question	= PWROFF-RST Timing (ms)
Help String	= PWROFF-RST Timing: PWR_EN deassert to PERSTb assert
Token	=1D	// Do NOT change this line
Offset	=32
Width	=01
Value	=<20>

Setup Question	= PWRON-RST Timing  (ms)
Help String	= PWRON-RST Timing: PWR_EN assert to PERSTb deassert
Token	=1E	// Do NOT change this line
Offset	=33
Width	=01
Value	=<20>

Setup Question	= RST-MACO Timing   (ms)
Help String	= RST-MACO Timing: PERSTb deassert to MACO_EN deassert
Token	=1F	// Do NOT change this line
Offset	=34
Width	=01
Value	=<1>

Setup Question	= ATCS Function 9 Support
Help String	= Enable/Disable ATCS Function 9 Support
Token	=20	// Do NOT change this line
Offset	=6E
Width	=01
Options	=*[00]Disabled	// Move "*" to the desired Option
         [01]Enabled

Setup Question	= AC Maximum Performance Limit
Help String	= Power limit adjustment percent for [Maximum Performance] on AC: 0 - 100
Token	=21	// Do NOT change this line
Offset	=6F
Width	=01
Value	=<0>

Setup Question	= AC Better Performance Limit
Help String	= Power limit adjustment percent for [Better Performance] on AC: 0 - 100
Token	=22	// Do NOT change this line
Offset	=70
Width	=01
Value	=<0>

Setup Question	= AC Better Battery Limit
Help String	= Power limit adjustment percent for [Better Battery] on AC: 0 - 100
Token	=23	// Do NOT change this line
Offset	=71
Width	=01
Value	=<0>

Setup Question	= DC Maximum Performance Limit
Help String	= Power limit adjustment percent for [Maximum Performance] on DC: 0 - 100
Token	=24	// Do NOT change this line
Offset	=72
Width	=01
Value	=<0>

Setup Question	= DC Better Performance Limit
Help String	= Power limit adjustment percent for [Better Performance] on DC: 0 - 100
Token	=25	// Do NOT change this line
Offset	=73
Width	=01
Value	=<0>

Setup Question	= DC Better Battery Limit
Help String	= Power limit adjustment percent for [Better Battery] on DC: 0 - 100
Token	=26	// Do NOT change this line
Offset	=74
Width	=01
Value	=<0>

Setup Question	= DC Battery Saver Limit
Help String	= Power limit adjustment percent for [Battery Saver] on DC: 0 - 100
Token	=27	// Do NOT change this line
Offset	=75
Width	=01
Value	=<0>

Setup Question	= ATIF Function 23 Support
Help String	= Enable/Disable ATIF Function 23 Support
Token	=28	// Do NOT change this line
Offset	=3B
Width	=01
Options	=*[00]Disabled	// Move "*" to the desired Option
         [01]Enabled

Setup Question	= Vari-Bright Maximum Performance
Help String	= Vari-Bright level for Maximum Performance on DC: 0 - 4
Token	=29	// Do NOT change this line
Offset	=4F
Width	=01
Value	=<0>

Setup Question	= Vari-Bright Better Performance
Help String	= Vari-Bright level for Better Performance on DC: 0 - 4
Token	=2A	// Do NOT change this line
Offset	=50
Width	=01
Value	=<1>

Setup Question	= Vari-Bright Better Battery
Help String	= Vari-Bright level for Better Battery on DC: 0 - 4
Token	=2B	// Do NOT change this line
Offset	=55
Width	=01
Value	=<3>

Setup Question	= Vari-Bright Battery Saver
Help String	= Vari-Bright level for Battery Saver on DC: 0 - 4
Token	=2C	// Do NOT change this line
Offset	=56
Width	=01
Value	=<3>

Setup Question	= Primary Video Adaptor
Help String	= Select Internal/External Graphics
Token	=2D	// Do NOT change this line
Offset	=06
Width	=01
Options	=*[01]Int Graphics (IGD)	// Move "*" to the desired Option
         [02]Ext Graphics (PEG)

Setup Question	= Wake On Voice
Help String	= Enable or Disable Wake On Voice
Token	=7F9	// Do NOT change this line
Offset	=58
Width	=01
Options	=*[00]Disabled	// Move "*" to the desired Option
         [01]Enabled

Setup Question	= ACP Power Gating
Help String	= Enable or Disable ACP Power Gating
Token	=2E	// Do NOT change this line
Offset	=59
Width	=01
Options	=*[00]Disabled	// Move "*" to the desired Option
         [01]Enabled

Setup Question	= ACP CLock Gating
Help String	= Enable or Disable ACP CLOCK Gating
Token	=2F	// Do NOT change this line
Offset	=60
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         *[01]Enabled

Setup Question	= Above 4GB MMIO Limit
Help String	= Select Above 4GB MMIO Limit to 35~48bits limit.
Token	=30	// Do NOT change this line
Offset	=3D
Width	=01
Options	=[23]35bit (32GB)	// Move "*" to the desired Option
         [24]36bit (64GB)
         [25]37bit (128GB)
         [26]38bit (256GB)
         [27]39bit (512GB)
         *[28]40bit (1TB)
         [29]41bit (2TB)
         [2A]42bit (4TB)
         [2B]43bit (8TB)
         [2C]44bit (16TB)
         [2D]45bit (32TB)
         [2E]46bit (64TB)
         [2F]47bit (128TB)
         [30]48bit (256TB)

Setup Question	= NVMe RAID mode
Help String	= Enable or disable NVMe RAID mode. Please setting the 'PCIe/GFX Lanes Configuration' item according to the RAID configuration
Token	=31	// Do NOT change this line
Offset	=5B
Width	=01
Options	=*[00]Disabled	// Move "*" to the desired Option
         [01]Enabled

Setup Question	= Touch Panel Support
Help String	= Enable/Disable exposing of _HID(PNP0C50) in ACPI ASL code to OS
Token	=7F5	// Do NOT change this line
Offset	=07
Width	=01
Options	=*[00]Under I2C 0 Bus	// Move "*" to the desired Option
         [01]Under I2C 1 Bus
         [02]Under I2C 2 Bus
         [03]Under I2C 3 Bus
         [10]ELAN TSP Under I2C 0 Bus
         [11]ELAN TSP Under I2C 1 Bus
         [12]ELAN TSP Under I2C 2 Bus
         [13]ELAN TSP Under I2C 3 Bus
         [04]Under USB 6 Bus
         [05]Disabled

Setup Question	= Touch Pad Support
Help String	= Enable/Disable exposing of _HID(PNP0C50) in ACPI ASL code to OS
Token	=7F6	// Do NOT change this line
Offset	=08
Width	=01
Options	=[00]Under I2C 0 Bus	// Move "*" to the desired Option
         *[01]Under I2C 1 Bus
         [02]Under I2C 2 Bus
         [03]Under I2C 3 Bus
         [20]ELAN TSP Under I2C 0 Bus
         [21]ELAN TSP Under I2C 1 Bus
         [22]ELAN TSP Under I2C 2 Bus
         [23]ELAN TSP Under I2C 3 Bus
         [04]Disabled

Setup Question	= Nfc Support
Help String	= Enable/Disable exposing of _HID(BCM2F25) in ACPI ASL code to OS
Token	=7F7	// Do NOT change this line
Offset	=09
Width	=01
Options	=[00]Under I2C 0 Bus	// Move "*" to the desired Option
         [01]Under I2C 1 Bus
         *[02]Under I2C 2 Bus
         [03]Under I2C 3 Bus
         [04]Disabled

Setup Question	= ALS Support
Help String	= Enable/Disable exposing of _HID(CPLM3218) in ACPI ASL code to OS
Token	=7F8	// Do NOT change this line
Offset	=0A
Width	=01
Options	=[00]Under I2C 0 Bus	// Move "*" to the desired Option
         [01]Under I2C 1 Bus
         *[02]Under I2C 2 Bus
         [03]Under I2C 3 Bus
         [04]Disabled

Setup Question	= HDMI over USB-C0
Help String	= Force HDMI signals route over USB Type C port
Token	=32	// Do NOT change this line
Offset	=0B
Width	=01
Options	=*[00]Native USB Type-C	// Move "*" to the desired Option
         [01]HDMI over USB Type-C
         [02]DP over USB Type-C

Setup Question	= HDMI over USB-C1
Help String	= Force HDMI signals route over USB Type C port
Token	=33	// Do NOT change this line
Offset	=0C
Width	=01
Options	=*[00]Native USB Type-C	// Move "*" to the desired Option
         [01]HDMI over USB Type-C
         [02]DP over USB Type-C

Setup Question	= DP0 Select
Help String	= DP0 Select only avaliable for Celadon Nova TBT/Non-TBT
Token	=34	// Do NOT change this line
Offset	=5E
Width	=01
Options	=*[00]EDP display	// Move "*" to the desired Option
         [01]DP display
         [02]HDMI display

Setup Question	= DP1 Select
Help String	= DP1 Select only avaliable for Celadon Nova TBT/Non-TBT
Token	=35	// Do NOT change this line
Offset	=5F
Width	=01
Options	=*[00]DP display	// Move "*" to the desired Option
         [01]HDMI display

Setup Question	= Turn off Xtal (S3/S5)
Help String	= Disable the Xtal during S3/S5
Token	=36	// Do NOT change this line
Offset	=82
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         *[01]Enabled

Setup Question	= Thunderbolt Support
Help String	= Enable Thunderbolt Support
Token	=7E0	// Do NOT change this line
Offset	=44
Width	=01
Options	=*[00]Disabled	// Move "*" to the desired Option
         [01]Enabled

Setup Question	= Thunderbolt Host Chipset
Help String	= Select Thunderbolt Host Card Chipset Name
Token	=7E1	// Do NOT change this line
Offset	=65
Width	=01
Options	=[00]Alpine Ridge	// Move "*" to the desired Option
         *[01]Titan Ridge

Setup Question	=  TR HR FPB Capability
Help String	= Enable or disable Titan Ridge Host Card PCIe FPB Capability
Token	=37	// Do NOT change this line
Offset	=6B
Width	=01
Options	=*[00]Disabled	// Move "*" to the desired Option
         [01]Enabled

Setup Question	= Thunderbolt Security Level
Help String	= Select Thunderbolt Security Level
Token	=38	// Do NOT change this line
Offset	=45
Width	=01
Options	=[00]No Security	// Move "*" to the desired Option
         *[01]User Authorization
         [02]Secure Connect
         [03]Display Port and USB
         [04]USB Docking Only

Setup Question	= Thunderbolt Force PWR
Help String	= Enable Thunderbolt Force PWR
Token	=39	// Do NOT change this line
Offset	=46
Width	=01
Options	=*[00]Disabled	// Move "*" to the desired Option
         [01]Enabled

Setup Question	= Thunderbolt Boot From TB
Help String	= Do Thunderbolt (Boot On) Command Before/After PCI Enumeration
Token	=3A	// Do NOT change this line
Offset	=47
Width	=01
Options	=*[00]Disabled	// Move "*" to the desired Option
         [01]Enabled

Setup Question	= Thunderbolt Boot From USB
Help String	= Do Thunderbolt (USB On) Command Before/After PCI Enumeration
Token	=3B	// Do NOT change this line
Offset	=48
Width	=01
Options	=*[00]Disabled	// Move "*" to the desired Option
         [01]Enabled

Setup Question	= Thunderbolt Assign Resource
Help String	= Assign Thunderbolt Resource Before/After PCI Enumeration
Token	=3C	// Do NOT change this line
Offset	=49
Width	=01
Options	=*[00]Disabled	// Move "*" to the desired Option
         [01]After PCI Enumeration

Setup Question	= Thunderbolt MMIO Resource
Help String	= Select Thunderbolt PCIE MMIO Resource
Token	=3D	// Do NOT change this line
Offset	=4A
Width	=01
Options	=*[00]Full Size	// Move "*" to the desired Option
         [01]Half Size
         [02]Three Quarters

Setup Question	= Thunderbolt in SLOT
Help String	= Select Thunderbolt Slot
Token	=7DF	// Do NOT change this line
Offset	=4B
Width	=01
Options	=[00]PCIE X8 SLOT	// Move "*" to the desired Option
         [01]PCIE DT SLOT
         *[02]PCIE TBT SLOT

Setup Question	= Legacy/Native/RTD3
Help String	= Select Thunderbolt Legacy/Native/RTD3 Mode
Token	=3E	// Do NOT change this line
Offset	=4C
Width	=01
Options	=[00]Legacy Mode	// Move "*" to the desired Option
         *[01]Native Mode
         [02]Native + RTD3Hot
         [03]Native + RTD3Cold

Setup Question	= Thunderbolt L1SS Support
Help String	= Select Thunderbolt PCIE L1SS Support
Token	=3F	// Do NOT change this line
Offset	=4D
Width	=01
Options	=*[00]Disabled	// Move "*" to the desired Option
         [01]Enabled

Setup Question	= Thunderbolt Wake Up Command
Help String	= Select Thunderbolt Wake Up Command
Token	=40	// Do NOT change this line
Offset	=66
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         *[02]GO2SX Command
         [03]GO2SX_NO_WAKE Command

Setup Question	= Serial Debug Message Under OS
Help String	= Enable Serial Debug Message Under OS
Token	=41	// Do NOT change this line
Offset	=11
Width	=01
Options	=*[00]Disabled	// Move "*" to the desired Option
         [01]Enabled

Setup Question	= Wireless LAN Recovery
Help String	= Wireless LAN Recovery suppport Enable/Disable
Token	=42	// Do NOT change this line
Offset	=51
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         *[01]Enabled
         [02]Dummy Reset

Setup Question	= Bluetooth PLDR support
Help String	= Bluetooth PLDR support Enable/Disable
Token	=43	// Do NOT change this line
Offset	=3A
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         *[01]Enabled
         [02]Dummy Reset

Setup Question	= Wireless Manageability Support
Help String	= Enable/Disable Wireless Manageability support
Token	=44	// Do NOT change this line
Offset	=67
Width	=01
Options	=*[00]Disabled	// Move "*" to the desired Option
         [01]Enabled

Setup Question	= Wireless Botton
Help String	= Enable/Disable Wireless Botton
Token	=45	// Do NOT change this line
Offset	=84
Width	=01
Options	=*[00]Disabled	// Move "*" to the desired Option
         [03]HID Based

Setup Question	= UCSI Support
Help String	= Enable/Disable UCSI (USB Type-C Connector System Software Interface)
Token	=46	// Do NOT change this line
Offset	=19
Width	=01
Options	=*[00]Disabled	// Move "*" to the desired Option
         [01]Enabled

Setup Question	= UCSI tunnel location
Help String	= UCSI tunnel can be put on ECRAM or MMIO space, this option specify which one is selected.
Token	=47	// Do NOT change this line
Offset	=64
Width	=01
Options	=[00]UCSI tunnel at EC RAM	// Move "*" to the desired Option
         *[01]UCSI tunnel at MMIO 0xFEEC2000

Setup Question	= Charger mode (NVDC vs. BYPASS)
Help String	= Enable/Disable charger BYPASS mode.
Token	=48	// Do NOT change this line
Offset	=1A
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         *[01]Enabled

Setup Question	= S3/Modern Standby Support
Help String	= Switch S3/Modern Standby
Token	=7F4	// Do NOT change this line
Offset	=38
Width	=01
Options	=*[00]S3 Enable	// Move "*" to the desired Option
         [01]Modern Standby Enable

Setup Question	= Modern Standby Type
Help String	= Select S0I2 or S0I3 type for Modern Standby.
Token	=49	// Do NOT change this line
Offset	=42
Width	=01
Options	=[00]Modern Standby + S0i2	// Move "*" to the desired Option
         *[01]Modern Standby + S0i3
         [02]Modern Standby + S0i2 + S0i3

Setup Question	= Reduce Hardware Support
Help String	= Enable/Disable Reduce Hardware Support. Please disable PME wakeup, when Reduce Hardware enabled.
Token	=7F3	// Do NOT change this line
Offset	=3C
Width	=01
Options	=*[00]Disabled	// Move "*" to the desired Option
         [01]Enabled

Setup Question	= MS Resource
Help String	= Enable: Enable USB current resource for MS; Disable: Disable USB current resource for MS.
Token	=4A	// Do NOT change this line
Offset	=61
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         *[01]Enabled

Setup Question	= Wake on PME
Help String	= Determines the action taken when the system power is off and a PCI Power Management Enable wake up event occurs.
Token	=4B	// Do NOT change this line
Offset	=43
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         *[01]Enabled

Setup Question	= Sensor Fusion User Mode Driver
Help String	= Enable/Disable Sensor Fusion User Mode Driver
Token	=4C	// Do NOT change this line
Offset	=3F
Width	=01
Options	=*[00]Disabled	// Move "*" to the desired Option
         [01]Enabled

Setup Question	= MITT/WITT Selection
Help String	= MITT/WITT Selection
Token	=4D	// Do NOT change this line
Offset	=1B
Width	=01
Options	=[00]MITT Only	// Move "*" to the desired Option
         [01]WITT Only
         *[02]Both disable

Setup Question	= Unused GPP Clocks Off
Help String	= Turn Unused GPP Clocks Off
Token	=4E	// Do NOT change this line
Offset	=1C
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         *[01]Enabled

Setup Question	= Clock PM: CLK_REQ0
Help String	= Enable or disable CLK_REQ0# for MXM x8 Slot J10
Token	=4F	// Do NOT change this line
Offset	=1D
Width	=01
Options	=*[00]Disabled	// Move "*" to the desired Option
         [01]Enabled

Setup Question	= Clock PM: CLK_REQ1
Help String	= Enable or disable CLK_REQ1# for Onboard LAN U55
Token	=50	// Do NOT change this line
Offset	=1E
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         *[01]Enabled

Setup Question	= Clock PM: CLK_REQ2
Help String	= Enable or disable CLK_REQ2# for M.2 WWAN Slot J90
Token	=51	// Do NOT change this line
Offset	=1F
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         *[01]Enabled

Setup Question	= Clock PM: CLK_REQ3
Help String	= Enable or disable CLK_REQ3# for Thunderbolt CON1
Token	=52	// Do NOT change this line
Offset	=20
Width	=01
Options	=*[00]Disabled	// Move "*" to the desired Option
         [01]Enabled

Setup Question	= Clock PM: CLK_REQ4
Help String	= Enable or disable CLK_REQ4# for DT x4 Slot J79
Token	=53	// Do NOT change this line
Offset	=21
Width	=01
Options	=*[00]Disabled	// Move "*" to the desired Option
         [01]Enabled

Setup Question	= Clock PM: CLK_REQ5
Help String	= Enable or disable CLK_REQ5# for M.2 SSD Slot J19
Token	=54	// Do NOT change this line
Offset	=22
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         *[01]Enabled

Setup Question	= Clock PM: CLK_REQ6
Help String	= Enable or disable CLK_REQ6# for M.2 WLAN Slot J92
Token	=55	// Do NOT change this line
Offset	=23
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         *[01]Enabled

Setup Question	= KBC Support
Help String	= Enable/Disable KBC Support under OS
Token	=56	// Do NOT change this line
Offset	=24
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         *[01]Enabled

Setup Question	= AcDcSwitch
Help String	= Enable/disable AcDcSwitch.
Token	=57	// Do NOT change this line
Offset	=25
Width	=01
Options	=*[00]Disabled	// Move "*" to the desired Option
         [01]Enabled

Setup Question	= AmdDcTimer
Help String	= AmdDcTimer Setting.
Token	=58	// Do NOT change this line
Offset	=26
Width	=01
Value	=<0>

Setup Question	= AmdAcTimer
Help String	= AmdAcTimer Setting.
Token	=59	// Do NOT change this line
Offset	=27
Width	=01
Value	=<0>

Setup Question	= Fake DC Level
Help String	= This filed used for specify the fake battery percentage, it will take effect if AC/DC switch enabled w/o real battery
Token	=5A	// Do NOT change this line
Offset	=85
Width	=01
Value	=<94>

Setup Question	= VDDP voltage
Help String	= VDDP voltage  Setting.
Token	=5B	// Do NOT change this line
Offset	=29
Width	=01
Options	=*[00]VDDP voltage (0.75V)	// Move "*" to the desired Option
         [01]VDDP voltage (+10mv)
         [02]VDDP voltage (+20mv)
         [03]VDDP voltage (+30mv)
         [04]VDDP voltage (+40mv)
         [05]VDDP voltage (+50mv)
         [06]VDDP voltage (+60mv)
         [07]VDDP voltage (+70mv)
         [08]VDDP voltage (+80mv)
         [09]VDDP voltage (+90mv)
         [0A]VDDP voltage (+100mv)
         [0B]VDDP voltage (-10mv)
         [0C]VDDP voltage (-20mv)
         [0D]VDDP voltage (-30mv)
         [0E]VDDP voltage (-40mv)
         [0F]VDDP voltage (-50mv)
         [10]VDDP voltage (-60mv)
         [11]VDDP voltage (-70mv)
         [12]VDDP voltage (-80mv)
         [13]VDDP voltage (-90mv)
         [14]VDDP voltage (-100mv)

Setup Question	= VDDIO voltage
Help String	= VDDIO voltage  Setting. VDDIO=1.2v+(N-128)*5mv  N=0~255
Token	=816	// Do NOT change this line
Offset	=80
Width	=01
Value	=<128>

Setup Question	= VDD18 voltage
Help String	= VDD18 voltage  Setting.
Token	=5C	// Do NOT change this line
Offset	=2A
Width	=01
Options	=*[00]VDD18 voltage (1.8V)	// Move "*" to the desired Option
         [01]VDD18 voltage (ANPEC:+40mv/TI:+25mv)
         [02]VDD18 voltage (ANPEC:+50mv/TI:+37.5mv)
         [03]VDD18 voltage (ANPEC:+60mv/TI:+50mv)
         [04]VDD18 voltage (ANPEC:+70mv/TI:+62.5mv)
         [05]VDD18 voltage (ANPEC:+80mv/TI:+75mv)
         [06]VDD18 voltage (ANPEC:+90mv/TI:+87.5mv)
         [07]VDD18 voltage (ANPEC:+100mv/TI:+100mv)
         [08]VDD18 voltage (ANPEC:+110mv/TI:+112.5mv)
         [09]VDD18 voltage (ANPEC:+120mv/TI:+125mv)
         [0A]VDD18 voltage (ANPEC:+130mv/TI:+137.5mv)
         [0B]VDD18 voltage (ANPEC:-40mv/TI:-25mv)
         [0C]VDD18 voltage (ANPEC:-50mv/TI:-37.5mv)
         [0D]VDD18 voltage (ANPEC:-60mv/TI:-50mv)
         [0E]VDD18 voltage (ANPEC:-70mv/TI:-62.5mv)
         [0F]VDD18 voltage (ANPEC:-80mv/TI:-75mv)
         [10]VDD18 voltage (ANPEC:-90mv/TI:-87.5mv)
         [11]VDD18 voltage (ANPEC:-100mv/TI:-100mv)
         [12]VDD18 voltage (ANPEC:-110mv/TI:-112.5mv)
         [13]VDD18 voltage (ANPEC:-120mv/TI:-125mv)
         [14]VDD18 voltage (ANPEC:-130mv/TI:-137.5mv)

Setup Question	= AMD KVM Mouse Protocol
Help String	= Swtich KVM Mouse Protocol between Absolut/Simple
Token	=5D	// Do NOT change this line
Offset	=35
Width	=01
Options	=[00]Absolute	// Move "*" to the desired Option
         [01]Simple
         *[03]Auto

Setup Question	= AMD DPTC interface
Help String	= Dynamic Power and Thermal Control Interface Enable/Disable
Token	=5E	// Do NOT change this line
Offset	=2B
Width	=01
Options	=*[00]Disabled	// Move "*" to the desired Option
         [01]Enabled

Setup Question	= STT sensor reporting
Help String	= Enable temperature report or STT through APML
Token	=5F	// Do NOT change this line
Offset	=2C
Width	=01
Options	=*[00]Disabled	// Move "*" to the desired Option
         [01]Report onboard sensors
         [02]Report onboard + eval card sensors

Setup Question	= BLINK LED
Help String	= Enable/Disable BLINK LED to identify S3/S4 state
Token	=60	// Do NOT change this line
Offset	=36
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         *[01]Enabled
         [02]GPIO 11 Output Low
         [03]GPIO 11 Output High

Setup Question	= iLA TraceMemoryEn
Help String	= Reserved 1M bytes MMIO space on 1M boundary when iLA TraceMemoryEn enabled
Token	=61	// Do NOT change this line
Offset	=4E
Width	=01
Options	=*[00]Disabled	// Move "*" to the desired Option
         [01]Enabled

Setup Question	= Combo CBS
Help String	= No help string
Token	=07	// Do NOT change this line
Offset	=20
Width	=01
Value	=11

Setup Question	= RedirectForReturnDis
Help String	= From a workaround for GCC/C000005 issue for XV Core on CZ A0, setting MSRC001_1029 Decode Configuration (DE_CFG) bit 14 [DecfgNoRdrctForReturns] to 1
Token	=0B	// Do NOT change this line
Offset	=21
Width	=01
Options	=*[FF]Auto	// Move "*" to the desired Option
         [01]1
         [00]0

Setup Question	= Platform First Error Handling
Help String	= Enable/disable PFEH, cloak individual banks, and mask deferred error interrupts from each bank.
Token	=0C	// Do NOT change this line
Offset	=22
Width	=01
Options	=[01]Enabled	// Move "*" to the desired Option
         [00]Disabled
         *[03]Auto

Setup Question	= Core Performance Boost
Help String	= Disable CPB
Token	=0D	// Do NOT change this line
Offset	=23
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         *[01]Auto

Setup Question	= Global C-state Control
Help String	= Controls IO based C-state generation and DF C-states.  There is another DF Cstate option which will be synchronized with this option if DF Cstate option is auto.
Token	=0E	// Do NOT change this line
Offset	=24
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         [01]Enabled
         *[03]Auto

Setup Question	= Opcache grayout flag
Help String	= No help string
Token	=700A	// Do NOT change this line
Offset	=25
Width	=01
Options	=*[00]0	// Move "*" to the desired Option
         [01]1
         [02]Display

Setup Question	= Opcache Control
Help String	= Enables or disables the Opcache
Token	=700B	// Do NOT change this line
Offset	=26
Width	=01
Options	=[01]Disabled	// Move "*" to the desired Option
         [00]Enabled
         *[FF]Auto

Setup Question	= SEV ASID Count
Help String	= This fields specifies the maximum valid ASID, which affects the maximum system physical address space. 16TB of physical address space is available for systems that support 253 ASIDs, while 8TB of physical address space is available for systems that support 509 ASIDs.
Token	=0F	// Do NOT change this line
Offset	=27
Width	=01
Options	=[00]253 ASIDs	// Move "*" to the desired Option
         [01]509 ASIDs
         *[03]Auto

Setup Question	= SEV-ES ASID Space Limit Control
Help String	= No help string
Token	=10	// Do NOT change this line
Offset	=28
Width	=01
Options	=*[00]Auto	// Move "*" to the desired Option
         [01]Manual

Setup Question	= SEV-ES ASID Space Limit
Help String	= SEV VMs using ASIDs below the SEV-ES ASID Space Limit must enable the SEV-ES feature. ASIDs from SEV-ES ASID Space Limit to (SEV ASID Count + 1) can only be used with SEV VMs. If this field is set to (SEV ASID Count + 1), all ASIDs are forced to be SEV-ES ASIDs. Hence, the valid values for this field is 1 - (SEV ASID Count + 1)
Token	=11	// Do NOT change this line
Offset	=29
Width	=04
Value	=<1>

Setup Question	= Streaming Stores Control
Help String	= Enables or disables the streaming stores functionality
Token	=12	// Do NOT change this line
Offset	=2D
Width	=01
Options	=[01]Disabled	// Move "*" to the desired Option
         [00]Enabled
         *[FF]Auto

Setup Question	= Local APIC Mode
Help String	= No help string
Token	=13	// Do NOT change this line
Offset	=1A9
Width	=01
Options	=[00]Compatibility	// Move "*" to the desired Option
         [01]xAPIC
         [02]x2APIC
         *[FF]Auto

Setup Question	= ACPI _CST C1 Declaration
Help String	= Determines whether or not to declare the C1 state to the OS.
Token	=14	// Do NOT change this line
Offset	=2F
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         [01]Enabled
         *[03]Auto

Setup Question	= MCA error thresh enable
Help String	= Enable MCA error thresholding.
Token	=15	// Do NOT change this line
Offset	=30
Width	=01
Options	=[00]False	// Move "*" to the desired Option
         *[01]True

Setup Question	= MCA error thresh count
Help String	= Effective error threshold count = 4095(0xFFF) - <this value> (e.g. the default value of 0xFF5 results in a threshold of 10).
Token	=16	// Do NOT change this line
Offset	=31
Width	=02
Value	=FF5

Setup Question	= SMU and PSP Debug Mode
Help String	= When this option is enabled, specific uncorrected errors detected by the PSP FW or SMU FW will hang and not reset the system
Token	=17	// Do NOT change this line
Offset	=33
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         [01]Enabled
         *[03]Auto

Setup Question	= PPIN Opt-in
Help String	= Turn on PPIN feature
Token	=18	// Do NOT change this line
Offset	=34
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         [01]Enabled
         *[FF]Auto

Setup Question	= Fast Short REP MOVSB
Help String	= No help string
Token	=19	// Do NOT change this line
Offset	=1C2
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         *[01]Enabled

Setup Question	= Enhanced REP MOVSB/STOSB
Help String	= No help string
Token	=1A	// Do NOT change this line
Offset	=1C3
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         *[01]Enabled

Setup Question	= IBS hardware workaround
Help String	= Set if using IBS execution sampling without software workaround for erratum 1,285. May impact performance.
Token	=1B	// Do NOT change this line
Offset	=1CA
Width	=01
Options	=*[00]Auto	// Move "*" to the desired Option
         [01]Enabled

Setup Question	= OC Mode
Help String	= No help string
Token	=700C	// Do NOT change this line
Offset	=35
Width	=01
Options	=[00]Normal Operation	// Move "*" to the desired Option
         [01]OC1
         [02]OC2
         [03]OC3
         *[05]Customized

Setup Question	= Custom Pstate0
Help String	= Disable - disable this Pstate  Custom - customize this Pstate, applicable only if PcdOcDisable=FALSE    WARNING - DAMAGE CAUSED BY USE OF YOUR AMD PROCESSOR OUTSIDE OF SPECIFICATION OR IN EXCESS OF FACTORY SETTINGS ARE NOT COVERED UNDER YOUR AMD PRODUCT WARRANTY AND MAY NOT BE COVERED BY YOUR SYSTEM MANUFACTURER'S WARRANTY.  Operating your AMD processor outside of specification or in excess of factory settings, including but not limited to overclocking, may damage or shorten the life of your processor or other system components, create system instabilities (e.g., data loss and corrupted images) and in extreme cases may result in total system failure. AMD does not provide support or service for issues or damages related to use of an AMD processor outside of processor specifications or in excess of factory settings.
Token	=7010	// Do NOT change this line
Offset	=38
Width	=01
Options	=[01]Custom	// Move "*" to the desired Option
         *[02]Auto

Setup Question	= Pstate0 Freq (MHz)
Help String	= Specifies core frequency (MHz)
Token	=1F	// Do NOT change this line
Offset	=115
Width	=04
Value	=<0>

Setup Question	= Pstate0 VID
Help String	= Specifies the core voltage.
Token	=7011	// Do NOT change this line
Offset	=39
Width	=01
Value	=FF

Setup Question	= L1 Stream HW Prefetcher
Help String	= Option to Enable | Disable L1 Stream HW Prefetcher
Token	=20	// Do NOT change this line
Offset	=3A
Width	=01
Options	=[00]Disable	// Move "*" to the desired Option
         [01]Enable
         *[03]Auto

Setup Question	= L2 Stream HW Prefetcher
Help String	= Option to Enable | Disable L2 Stream HW Prefetcher
Token	=21	// Do NOT change this line
Offset	=3B
Width	=01
Options	=[00]Disable	// Move "*" to the desired Option
         [01]Enable
         *[03]Auto

Setup Question	= Core Watchdog Timer Enable
Help String	= Enable or disable CPU Watchdog Timer
Token	=7012	// Do NOT change this line
Offset	=3C
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         [01]Enabled
         *[03]Auto

Setup Question	= Core Watchdog Timer Interval
Help String	= No help string
Token	=22	// Do NOT change this line
Offset	=3D
Width	=02
Options	=[900]21.461s	// Move "*" to the desired Option
         [800]10.730s
         [00]5.364s
         [100]2.681s
         [200]1.340s
         [300]669.41ms
         [400]334.05ms
         [500]166.37ms
         [600]82.53ms
         [700]40.61ms
         [901]20.970ms
         [801]10.484ms
         [01]5.241ms
         [101]2.620ms
         [201]1.309ms
         [301]654.08us
         [401]326.4us
         [501]162.56us
         [601]80.64us
         [701]39.68us
         *[FFFF]Auto

Setup Question	= Core Watchdog Timer Severity
Help String	= Specify the CPU watch dog timer severity (MSRC001_0074[CpuWdTmrCfgSeverity]).
Token	=23	// Do NOT change this line
Offset	=3F
Width	=01
Options	=[00]No Error	// Move "*" to the desired Option
         [01]Transparent
         [02]Corrected
         [03]Deferred
         [04]Uncorrected
         [05]Fatal
         *[FF]Auto

Setup Question	= CC6 memory region encryption
Help String	= Control whether or not the CC6 save/restore memory is encrypted
Token	=26	// Do NOT change this line
Offset	=43
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         [01]Enabled
         *[03]Auto

Setup Question	= Memory Clear
Help String	= When this feature is disabled, BIOS does not implement MemClear after memory training (only if non-ECC DIMMs are used).
Token	=27	// Do NOT change this line
Offset	=FD
Width	=01
Options	=[00]Enabled	// Move "*" to the desired Option
         [01]Disabled
         *[03]Auto

Setup Question	= Disable DF to external downstream IP SyncFloodPropagation
Help String	= Disables Error propagation to UMC or any downstream slaves eg. FCH. Use this to avoid reset in failure scenario
Token	=28	// Do NOT change this line
Offset	=FC
Width	=01
Options	=[01]Sync flood disabled	// Move "*" to the desired Option
         [00]Sync flood enabled
         *[FF]Auto

Setup Question	= Disable DF sync flood propagation
Help String	= Control DF::PIEConfig[DisSyncFloodProp]  Disables propagation from PIE to other DF components and eventually to SDP ports
Token	=29	// Do NOT change this line
Offset	=42
Width	=01
Options	=[01]Sync flood disabled	// Move "*" to the desired Option
         [00]Sync flood enabled
         *[03]Auto

Setup Question	= Freeze DF module queues on error
Help String	= Disabling this option sets DF:DfGlobalCtrl[DisImmSyncFloodOnFatalError]  Enables freezing of all DF queues on error and also forces a sync flood on HWA even if MCAs are disabled
Token	=2A	// Do NOT change this line
Offset	=46
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         [01]Enabled
         *[03]Auto

Setup Question	= DF Cstates
Help String	= When DF Cstate feature is enabled, FW programs the registers required to enable this feature is the DF HW. (For auto option, it means this option will synchronized with Global C State.)
Token	=2B	// Do NOT change this line
Offset	=13E
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         [01]Enabled
         *[FF]Auto

Setup Question	= DRAM scrub time
Help String	= Provide a value that is the number of hours to scrub memory.
Token	=2C	// Do NOT change this line
Offset	=40
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         [01]1 hour
         [04]4 hours
         [08]8 hours
         [10]16 hours
         [18]24 hours
         [30]48 hours
         *[FF]Auto

Setup Question	= Poison scrubber control
Help String	= Control DF::RedirScrubCtrl[RedirScrubMode[1]]
Token	=2D	// Do NOT change this line
Offset	=FB
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         [01]Enabled
         *[03]Auto

Setup Question	= Redirect scrubber control
Help String	= Control DF::RedirScrubCtrl[RedirScrubMode[0]]
Token	=2E	// Do NOT change this line
Offset	=41
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         [01]Enabled
         *[03]Auto

Setup Question	= Redirect scrubber limit
Help String	= Controls the number of redirect scrubs allowed at any one time (DF::RedirScrubCtrl[RedirScrubReqLmt])
Token	=2F	// Do NOT change this line
Offset	=47
Width	=01
Options	=[01]2	// Move "*" to the desired Option
         [02]4
         [03]8
         [00]Infinite
         *[FF]Auto

Setup Question	= Memory interleaving
Help String	= Allows for disabling memory channel interleaving.
Token	=30	// Do NOT change this line
Offset	=44
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         *[07]Auto

Setup Question	= Memory interleaving size
Help String	= Controls the memory interleaving size. The valid values are AUTO, 256 bytes, 512 bytes, 1 Kbytes or 2Kbytes. This determines the starting address of the interleave (bit 8, 9, 10 or 11).
Token	=31	// Do NOT change this line
Offset	=45
Width	=01
Options	=[00]256 Bytes	// Move "*" to the desired Option
         [01]512 Bytes
         [02]1 KB
         [03]2 KB
         *[07]Auto

Setup Question	= DRAM map inversion
Help String	= Inverting the map will cause the highest memory channels to get assigned the lowest addresses in the system.
Token	=32	// Do NOT change this line
Offset	=FA
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         [01]Enabled
         *[03]Auto

Setup Question	= Overclock
Help String	= Memory Overclock Settings
Token	=40	// Do NOT change this line
Offset	=4A
Width	=01
Options	=*[FF]Auto	// Move "*" to the desired Option
         [01]Enabled

Setup Question	= Memory Clock Speed
Help String	= Specifies the memory clock frequency.
Token	=41	// Do NOT change this line
Offset	=4B
Width	=01
Options	=*[FF]Auto	// Move "*" to the desired Option
         [18]800MHz
         [1C]933MHz
         [20]1067MHz
         [24]1200MHz
         [28]1333MHz
         [29]1367MHz
         [2A]1400MHz
         [2B]1433MHz
         [2C]1467MHz
         [2D]1500MHz
         [2E]1533MHz
         [2F]1567MHz
         [30]1600MHz
         [31]1633MHz
         [32]1667MHz
         [33]1700MHz
         [34]1733MHz
         [35]1767MHz
         [36]1800MHz
         [37]1833MHz
         [38]1867MHz
         [39]1900MHz
         [3A]1933MHz
         [3B]1967MHz
         [3C]2000MHz
         [3D]2033MHz
         [3E]2067MHz
         [3F]2100MHz
         [40]2133MHZ
         [41]2167MHZ
         [42]2200MHZ
         [43]2233MHZ
         [44]2267MHZ
         [45]2300MHZ
         [46]2333MHZ
         [47]2367MHZ
         [48]2400MHZ
         [49]2433MHZ
         [4A]2467MHZ
         [4B]2500MHZ
         [4C]2550MHZ
         [4D]2600MHZ
         [4E]2650MHZ
         [4F]2700MHZ
         [50]2750MHZ
         [51]2800MHZ
         [52]2850MHZ
         [53]2900MHZ
         [54]2950MHZ
         [55]3000MHZ
         [56]3050MHZ
         [57]3100MHZ
         [58]3150MHZ
         [59]3200MHZ
         [5A]3250MHZ
         [5B]3300MHZ
         [5C]3350MHZ
         [5D]3400MHZ
         [5E]3450MHZ
         [5F]3500MHZ
         [60]3550MHZ
         [61]3600MHZ
         [62]3650MHZ
         [63]3700MHZ
         [64]3750MHZ
         [65]3800MHZ
         [66]3850MHZ
         [67]3900MHZ
         [68]3950MHZ
         [69]4000MHZ

Setup Question	= Tcl
Help String	= Specifies the CAS latency.
Token	=42	// Do NOT change this line
Offset	=4C
Width	=01
Options	=*[FF]Auto	// Move "*" to the desired Option
         [08]8 Clk
         [09]9 Clk
         [0A]0Ah Clk
         [0B]0Bh Clk
         [0C]0Ch Clk
         [0D]0Dh Clk
         [0E]0Eh Clk
         [0F]0Fh Clk
         [10]10h Clk
         [11]11h Clk
         [12]12h Clk
         [13]13h Clk
         [14]14h Clk
         [15]15h Clk
         [16]16h Clk
         [17]17h Clk
         [18]18h Clk
         [19]19h Clk
         [1A]1Ah Clk
         [1B]1Bh Clk
         [1C]1Ch Clk
         [1D]1Dh Clk
         [1E]1Eh Clk
         [1F]1Fh Clk
         [20]20h Clk
         [21]21h Clk

Setup Question	= Trcdrd
Help String	= Specifies the RAS# Active to CAS# Read Delay Time.
Token	=43	// Do NOT change this line
Offset	=4D
Width	=01
Options	=*[FF]Auto	// Move "*" to the desired Option
         [08]8 Clk
         [09]9 Clk
         [0A]0Ah Clk
         [0B]0Bh Clk
         [0C]0Ch Clk
         [0D]0Dh Clk
         [0E]0Eh Clk
         [0F]0Fh Clk
         [10]10h Clk
         [11]11h Clk
         [12]12h Clk
         [13]13h Clk
         [14]14h Clk
         [15]15h Clk
         [16]16h Clk
         [17]17h Clk
         [18]18h Clk
         [19]19h Clk
         [1A]1Ah Clk
         [1B]1Bh Clk
         [1C]1Ch Clk
         [1D]1Dh Clk
         [1E]1Eh Clk
         [1F]1Fh Clk
         [20]20h Clk
         [21]21h Clk
         [22]22h Clk
         [23]23h Clk
         [24]24h Clk
         [25]25h Clk
         [26]26h Clk
         [27]27h Clk
         [28]28h Clk
         [29]29h Clk
         [2A]2Ah Clk
         [2B]2Bh Clk
         [2C]2Ch Clk
         [2D]2Dh Clk
         [2E]2Eh Clk
         [2F]2Fh Clk
         [30]30h Clk
         [31]31h Clk
         [32]32h Clk
         [33]33h Clk
         [34]34h Clk
         [35]35h Clk
         [36]36h Clk
         [37]37h Clk
         [38]38h Clk
         [39]39h Clk
         [3A]3Ah Clk
         [3B]3Bh Clk
         [3C]3Ch Clk
         [3D]3Dh Clk
         [3E]3Eh Clk
         [3F]3Fh Clk

Setup Question	= Trcdwr
Help String	= Specifies the RAS# Active to CAS# Write Delay Time.
Token	=44	// Do NOT change this line
Offset	=4E
Width	=01
Options	=*[FF]Auto	// Move "*" to the desired Option
         [08]8 Clk
         [09]9 Clk
         [0A]0A Clk
         [0B]0B Clk
         [0C]0C Clk
         [0D]0D Clk
         [0E]0E Clk
         [0F]0F Clk
         [10]10h Clk
         [11]11h Clk
         [12]12h Clk
         [13]13h Clk
         [14]14h Clk
         [15]15h Clk
         [16]16h Clk
         [17]17h Clk
         [18]18h Clk
         [19]19h Clk
         [1A]1Ah Clk
         [1B]1Bh Clk
         [1C]1Ch Clk
         [1D]1Dh Clk
         [1E]1Eh Clk
         [1F]1Fh Clk
         [20]20h Clk
         [21]21h Clk
         [22]22h Clk
         [23]23h Clk
         [24]24h Clk
         [25]25h Clk
         [26]26h Clk
         [27]27h Clk
         [28]28h Clk
         [29]29h Clk
         [2A]2Ah Clk
         [2B]2Bh Clk
         [2C]2Ch Clk
         [2D]2Dh Clk
         [2E]2Eh Clk
         [2F]2Fh Clk
         [30]30h Clk
         [31]31h Clk
         [32]32h Clk
         [33]33h Clk
         [34]34h Clk
         [35]35h Clk
         [36]36h Clk
         [37]37h Clk
         [38]38h Clk
         [39]39h Clk
         [3A]3Ah Clk
         [3B]3Bh Clk
         [3C]3Ch Clk
         [3D]3Dh Clk
         [3E]3Eh Clk
         [3F]3Fh Clk

Setup Question	= Trp
Help String	= Specifies Row Precharge Delay Time.
Token	=45	// Do NOT change this line
Offset	=4F
Width	=01
Options	=*[FF]Auto	// Move "*" to the desired Option
         [08]8 Clk
         [09]9 Clk
         [0A]0Ah Clk
         [0B]0Bh Clk
         [0C]0Ch Clk
         [0D]0Dh Clk
         [0E]0Eh Clk
         [0F]0Fh Clk
         [10]10h Clk
         [11]11h Clk
         [12]12h Clk
         [13]13h Clk
         [14]14h Clk
         [15]15h Clk
         [16]16h Clk
         [17]17h Clk
         [18]18h Clk
         [19]19h Clk
         [1A]1Ah Clk
         [1B]1Bh Clk
         [1C]1Ch Clk
         [1D]1Dh Clk
         [1E]1Eh Clk
         [1F]1Fh Clk
         [20]20h Clk
         [21]21h Clk
         [22]22h Clk
         [23]23h Clk
         [24]24h Clk
         [25]25h Clk
         [26]26h Clk
         [27]27h Clk
         [28]28h Clk
         [29]29h Clk
         [2A]2Ah Clk
         [2B]2Bh Clk
         [2C]2Ch Clk
         [2D]2Dh Clk
         [2E]2Eh Clk
         [2F]2Fh Clk
         [30]30h Clk
         [31]31h Clk
         [32]32h Clk
         [33]33h Clk
         [34]34h Clk
         [35]35h Clk
         [36]36h Clk
         [37]37h Clk
         [38]38h Clk
         [39]39h Clk
         [3A]3Ah Clk
         [3B]3Bh Clk
         [3C]3Ch Clk
         [3D]3Dh Clk
         [3E]3Eh Clk
         [3F]3Fh Clk

Setup Question	= Tras
Help String	= Specifies the Active to Precharge Delay Time.
Token	=46	// Do NOT change this line
Offset	=50
Width	=01
Options	=*[FF]Auto	// Move "*" to the desired Option
         [15]15h Clk
         [16]16h Clk
         [17]17h Clk
         [18]18h Clk
         [19]19h Clk
         [1A]1Ah Clk
         [1B]1Bh Clk
         [1C]1Ch Clk
         [1D]1Dh Clk
         [1E]1Eh Clk
         [1F]1Fh Clk
         [20]20h Clk
         [21]21h Clk
         [22]22h Clk
         [23]23h Clk
         [24]24h Clk
         [25]25h Clk
         [26]26h Clk
         [27]27h Clk
         [28]28h Clk
         [29]29h Clk
         [2A]2Ah Clk
         [2B]2Bh Clk
         [2C]2Ch Clk
         [2D]2Dh Clk
         [2E]2Eh Clk
         [2F]2Fh Clk
         [30]30h Clk
         [31]31h Clk
         [32]32h Clk
         [33]33h Clk
         [34]34h Clk
         [35]35h Clk
         [36]36h Clk
         [37]37h Clk
         [38]38h Clk
         [39]39h Clk
         [3A]3Ah Clk

Setup Question	= Trc Ctrl
Help String	= Specify Trc
Token	=47	// Do NOT change this line
Offset	=51
Width	=01
Options	=*[00]Auto	// Move "*" to the desired Option
         [01]Manual

Setup Question	= Trc
Help String	= Specifies Active to Active/Refresh Delay Time. Valid values 87h-1Dh.
Token	=48	// Do NOT change this line
Offset	=52
Width	=01
Value	=39

Setup Question	= TrrdS
Help String	= Specifies the Activate to Activate Delay Time, different bank group (tRRD_S)
Token	=49	// Do NOT change this line
Offset	=53
Width	=01
Options	=*[FF]Auto	// Move "*" to the desired Option
         [04]4 Clk
         [05]5 Clk
         [06]6 Clk
         [07]7 Clk
         [08]8 Clk
         [09]9 Clk
         [0A]0Ah Clk
         [0B]0Bh Clk
         [0C]0Ch Clk

Setup Question	= TrrdL
Help String	= Specifies the Activate to Activate Delay Time, same bank group (tRRD_L)
Token	=4A	// Do NOT change this line
Offset	=54
Width	=01
Options	=*[FF]Auto	// Move "*" to the desired Option
         [04]4 Clk
         [05]5 Clk
         [06]6 Clk
         [07]7 Clk
         [08]8 Clk
         [09]9 Clk
         [0A]0Ah Clk
         [0B]0Bh Clk
         [0C]0Ch Clk

Setup Question	= Tfaw Ctrl
Help String	= Specify Tfaw
Token	=4B	// Do NOT change this line
Offset	=55
Width	=01
Options	=*[00]Auto	// Move "*" to the desired Option
         [01]Manual

Setup Question	= Tfaw
Help String	= Specifies the Four Activate Window Time. Valid values 36h-6h.
Token	=4C	// Do NOT change this line
Offset	=56
Width	=01
Value	=1A

Setup Question	= TwtrS
Help String	= Specifies the Minimum Write to Read Time, different bank group
Token	=4D	// Do NOT change this line
Offset	=57
Width	=01
Options	=*[FF]Auto	// Move "*" to the desired Option
         [02]2 Clk
         [03]3 Clk
         [04]4 Clk
         [05]5 Clk
         [06]6 Clk
         [07]7 Clk
         [08]8 Clk
         [09]9 Clk
         [0A]0Ah Clk
         [0B]0Bh Clk
         [0C]0Ch Clk
         [0D]0Dh Clk
         [0E]0Eh Clk

Setup Question	= TwtrL
Help String	= Specifies the Minimum Write to Read Time, same bank group
Token	=4E	// Do NOT change this line
Offset	=58
Width	=01
Options	=*[FF]Auto	// Move "*" to the desired Option
         [02]2 Clk
         [03]3 Clk
         [04]4 Clk
         [05]5 Clk
         [06]6 Clk
         [07]7 Clk
         [08]8 Clk
         [09]9 Clk
         [0A]0Ah Clk
         [0B]0Bh Clk
         [0C]0Ch Clk
         [0D]0Dh Clk
         [0E]0Eh Clk

Setup Question	= Twr Ctrl
Help String	= Specify Twr
Token	=4F	// Do NOT change this line
Offset	=59
Width	=01
Options	=*[00]Auto	// Move "*" to the desired Option
         [01]Manual

Setup Question	= Twr
Help String	= Specifies the Minimum Write Recovery Time. Valid value 51h-Ah
Token	=50	// Do NOT change this line
Offset	=5A
Width	=01
Value	=12

Setup Question	= Trcpage Ctrl
Help String	= Specify Trcpage
Token	=51	// Do NOT change this line
Offset	=5B
Width	=01
Options	=*[00]Auto	// Move "*" to the desired Option
         [01]Manual

Setup Question	= Trcpage
Help String	= SDRAM Optional Features (tMAW, MAC). Valid value 3FFh - 0h
Token	=52	// Do NOT change this line
Offset	=5C
Width	=02
Value	=0

Setup Question	= TrdrdScL Ctrl
Help String	= Specify TrdrdScL
Token	=53	// Do NOT change this line
Offset	=5E
Width	=01
Options	=*[00]Auto	// Move "*" to the desired Option
         [01]Manual

Setup Question	= TrdrdScL
Help String	= Specifies the CAS to CAS Delay Time, same bank group. Valid values Fh-1h
Token	=54	// Do NOT change this line
Offset	=5F
Width	=01
Value	=3

Setup Question	= TwrwrScL Ctrl
Help String	= Specify TwrwrScL
Token	=55	// Do NOT change this line
Offset	=60
Width	=01
Options	=*[00]Auto	// Move "*" to the desired Option
         [01]Manual

Setup Question	= TwrwrScL
Help String	= Specifies the CAS to CAS Delay Time, same bank group. Valid values 3Fh-1h
Token	=56	// Do NOT change this line
Offset	=61
Width	=01
Value	=3

Setup Question	= Trfc Ctrl
Help String	= Specify Trfc
Token	=57	// Do NOT change this line
Offset	=62
Width	=01
Options	=*[00]Auto	// Move "*" to the desired Option
         [01]Manual

Setup Question	= Trfc
Help String	= Specifies the Refresh Recovery Delay Time (tRFC1). Valid values 3DEh-3Ch
Token	=58	// Do NOT change this line
Offset	=63
Width	=02
Value	=138

Setup Question	= Trfc2 Ctrl
Help String	= Specify Trfc2
Token	=59	// Do NOT change this line
Offset	=65
Width	=01
Options	=*[00]Auto	// Move "*" to the desired Option
         [01]Manual

Setup Question	= Trfc2
Help String	= Specifies the Refresh Recovery Delay Time (tRFC2).  Valid values 3DEh-3Ch
Token	=5A	// Do NOT change this line
Offset	=66
Width	=02
Value	=C0

Setup Question	= Trfc4 Ctrl
Help String	= Specify Trfc4
Token	=5B	// Do NOT change this line
Offset	=68
Width	=01
Options	=*[00]Auto	// Move "*" to the desired Option
         [01]Manual

Setup Question	= Trfc4
Help String	= Specifies the Refresh Recovery Delay Time (tRFC4). Valid values 3DEh-3Ch
Token	=5C	// Do NOT change this line
Offset	=69
Width	=02
Value	=84

Setup Question	= Tcwl
Help String	= Specifies the CAS Write Latency
Token	=5D	// Do NOT change this line
Offset	=6B
Width	=01
Options	=*[FF]Auto	// Move "*" to the desired Option
         [09]9 Clk
         [0A]0Ah Clk
         [0B]0Bh Clk
         [0C]0Ch Clk
         [0E]0Eh Clk
         [10]10h Clk
         [12]12h Clk
         [14]14h Clk

Setup Question	= Trtp
Help String	= Specifies the Read CAS# to Precharge Delay Time.
Token	=5E	// Do NOT change this line
Offset	=6C
Width	=01
Options	=*[FF]Auto	// Move "*" to the desired Option
         [05]5 Clk
         [06]6 Clk
         [07]7 Clk
         [08]8 Clk
         [09]9 Clk
         [0A]0Ah Clk
         [0B]0Bh Clk
         [0C]0Ch Clk
         [0D]0Dh Clk
         [0E]0Eh Clk

Setup Question	= Tcke
Help String	= Specifies the CKE minimum high and low pulse width in memory clock cycles.
Token	=5F	// Do NOT change this line
Offset	=6D
Width	=01
Options	=*[FF]Auto	// Move "*" to the desired Option
         [01]1 Clk
         [02]2 Clk
         [03]3 Clk
         [04]4 Clk
         [05]5 Clk
         [06]6 Clk
         [07]7 Clk
         [08]8 Clk
         [09]9 Clk
         [0A]0Ah Clk
         [0B]0Bh Clk
         [0C]0Ch Clk
         [0D]0Dh Clk
         [0E]0Eh Clk
         [0F]0Fh Clk
         [10]10h Clk
         [11]11h Clk
         [12]12h Clk
         [13]13h Clk
         [14]14h Clk
         [15]15h Clk
         [16]16h Clk
         [17]17h Clk
         [18]18h Clk
         [19]19h Clk
         [1A]1Ah Clk
         [1B]1Bh Clk
         [1C]1Ch Clk
         [1D]1Dh Clk
         [1E]1Eh Clk
         [1F]1Fh Clk

Setup Question	= Trdwr
Help String	= Specifies the Read to Write turnaround timing.
Token	=60	// Do NOT change this line
Offset	=6E
Width	=01
Options	=*[FF]Auto	// Move "*" to the desired Option
         [01]1 Clk
         [02]2 Clk
         [03]3 Clk
         [04]4 Clk
         [05]5 Clk
         [06]6 Clk
         [07]7 Clk
         [08]8 Clk
         [09]9 Clk
         [0A]0Ah Clk
         [0B]0Bh Clk
         [0C]0Ch Clk
         [0D]0Dh Clk
         [0E]0Eh Clk
         [0F]0Fh Clk
         [10]10h Clk
         [11]11h Clk
         [12]12h Clk
         [13]13h Clk
         [14]14h Clk
         [15]15h Clk
         [16]16h Clk
         [17]17h Clk
         [18]18h Clk
         [19]19h Clk
         [1A]1Ah Clk
         [1B]1Bh Clk
         [1C]1Ch Clk
         [1D]1Dh Clk
         [1E]1Eh Clk
         [1F]1Fh Clk

Setup Question	= Twrrd
Help String	= Specifies the Write to Read turnaround timing.
Token	=61	// Do NOT change this line
Offset	=6F
Width	=01
Options	=*[FF]Auto	// Move "*" to the desired Option
         [01]1 Clk
         [02]2 Clk
         [03]3 Clk
         [04]4 Clk
         [05]5 Clk
         [06]6 Clk
         [07]7 Clk
         [08]8 Clk
         [09]9 Clk
         [0A]0Ah Clk
         [0B]0Bh Clk
         [0C]0Ch Clk
         [0D]0Dh Clk
         [0E]0Eh Clk
         [0F]0Fh Clk

Setup Question	= TwrwrSc
Help String	= Specifies the Write to Write turnaround timing in the same chipselect.
Token	=62	// Do NOT change this line
Offset	=70
Width	=01
Options	=*[FF]Auto	// Move "*" to the desired Option
         [01]1 Clk
         [02]2 Clk
         [03]3 Clk
         [04]4 Clk
         [05]5 Clk
         [06]6 Clk
         [07]7 Clk
         [08]8 Clk
         [09]9 Clk
         [0A]0Ah Clk
         [0B]0Bh Clk
         [0C]0Ch Clk
         [0D]0Dh Clk
         [0E]0Eh Clk
         [0F]0Fh Clk

Setup Question	= TwrwrSd
Help String	= Specifies the Write to Write turnaround timing in the same DIMM.
Token	=63	// Do NOT change this line
Offset	=71
Width	=01
Options	=*[FF]Auto	// Move "*" to the desired Option
         [01]1 Clk
         [02]2 Clk
         [03]3 Clk
         [04]4 Clk
         [05]5 Clk
         [06]6 Clk
         [07]7 Clk
         [08]8 Clk
         [09]9 Clk
         [0A]0Ah Clk
         [0B]0Bh Clk
         [0C]0Ch Clk
         [0D]0Dh Clk
         [0E]0Eh Clk
         [0F]0Fh Clk

Setup Question	= TwrwrDd
Help String	= Specifies the Write to Write turnaround timing in a different DIMM.
Token	=64	// Do NOT change this line
Offset	=72
Width	=01
Options	=*[FF]Auto	// Move "*" to the desired Option
         [01]1 Clk
         [02]2 Clk
         [03]3 Clk
         [04]4 Clk
         [05]5 Clk
         [06]6 Clk
         [07]7 Clk
         [08]8 Clk
         [09]9 Clk
         [0A]0Ah Clk
         [0B]0Bh Clk
         [0C]0Ch Clk
         [0D]0Dh Clk
         [0E]0Eh Clk
         [0F]0Fh Clk

Setup Question	= TrdrdSc
Help String	= Specifies the Read to Read turnaround timing in the same chipselect.
Token	=65	// Do NOT change this line
Offset	=73
Width	=01
Options	=*[FF]Auto	// Move "*" to the desired Option
         [01]1 Clk
         [02]2 Clk
         [03]3 Clk
         [04]4 Clk
         [05]5 Clk
         [06]6 Clk
         [07]7 Clk
         [08]8 Clk
         [09]9 Clk
         [0A]0Ah Clk
         [0B]0Bh Clk
         [0C]0Ch Clk
         [0D]0Dh Clk
         [0E]0Eh Clk
         [0F]0Fh Clk

Setup Question	= TrdrdSd
Help String	= Specifies the Read to Read turnaround timing in the same DIMM.
Token	=66	// Do NOT change this line
Offset	=74
Width	=01
Options	=*[FF]Auto	// Move "*" to the desired Option
         [01]1 Clk
         [02]2 Clk
         [03]3 Clk
         [04]4 Clk
         [05]5 Clk
         [06]6 Clk
         [07]7 Clk
         [08]8 Clk
         [09]9 Clk
         [0A]0Ah Clk
         [0B]0Bh Clk
         [0C]0Ch Clk
         [0D]0Dh Clk
         [0E]0Eh Clk
         [0F]0Fh Clk

Setup Question	= TrdrdDd
Help String	= Specifies the Read to Read turnaround timing in a different DIMM.
Token	=67	// Do NOT change this line
Offset	=75
Width	=01
Options	=*[FF]Auto	// Move "*" to the desired Option
         [01]1 Clk
         [02]2 Clk
         [03]3 Clk
         [04]4 Clk
         [05]5 Clk
         [06]6 Clk
         [07]7 Clk
         [08]8 Clk
         [09]9 Clk
         [0A]0Ah Clk
         [0B]0Bh Clk
         [0C]0Ch Clk
         [0D]0Dh Clk
         [0E]0Eh Clk
         [0F]0Fh Clk

Setup Question	= ProcODT
Help String	= Specifies the Processor ODT
Token	=68	// Do NOT change this line
Offset	=76
Width	=01
Options	=*[FF]Auto	// Move "*" to the desired Option
         [00]High Impedance
         [01]480 ohm
         [02]240 ohm
         [03]160 ohm
         [08]120 ohm
         [09]96 ohm
         [0A]80 ohm
         [0B]68.6 ohm
         [18]60 ohm
         [19]53.3 ohm
         [1A]48 ohm
         [1B]43.6 ohm
         [38]40 ohm
         [39]36.9 ohm
         [3A]34.3 ohm
         [3B]32 ohm
         [3E]30 ohm
         [3F]28.2 ohm

Setup Question	= Cmd2T
Help String	= Select between 1T and 2T mode on ADDR/CMD
Token	=6A	// Do NOT change this line
Offset	=77
Width	=01
Options	=[00]1T	// Move "*" to the desired Option
         [01]2T
         *[FF]Auto

Setup Question	= Gear Down Mode
Help String	= No help string
Token	=6B	// Do NOT change this line
Offset	=78
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         [01]Enabled
         *[FF]Auto

Setup Question	= LPDDR4 Refresh Mode
Help String	= Auto will result in all banks being enabled. Per bank enables refreshes to be sent on a per bank basis.
Token	=6C	// Do NOT change this line
Offset	=13F
Width	=01
Options	=*[00]Auto	// Move "*" to the desired Option
         [01]All Banks
         [02]Per Bank

Setup Question	= Power Down Enable
Help String	= Enable or disable DDR power down mode
Token	=6D	// Do NOT change this line
Offset	=79
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         [01]Enabled
         *[FF]Auto

Setup Question	= Disable Burst/Postponed Refresh
Help String	= Programming SubUrgRefLowerBound = 1 and UrgRefLimit = 1 will disable burst/postponed refresh
Token	=6E	// Do NOT change this line
Offset	=1C7
Width	=01
Options	=*[FF]Auto	// Move "*" to the desired Option
         [01]Enabled

Setup Question	= SubUrgRefLowerBound
Help String	= Specifies the stored refresh limit to required enter sub-urgent refresh mode  Constraint: SubUrgRefLowerBound <= UrgRefLimit  Valid value: 6 ~ 1
Token	=6F	// Do NOT change this line
Offset	=1C4
Width	=01
Value	=1

Setup Question	= UrgRefLimit
Help String	= Specifies the stored refresh limit to required enter urgent refresh mode  Constraint: SubUrgRefLowerBound <= UrgRefLimit  Valid value: 6 ~ 1
Token	=70	// Do NOT change this line
Offset	=1C5
Width	=01
Value	=1

Setup Question	= DRAM Maximum Activate Count
Help String	= Override DIMM SPD Byte 7 [3:0] Maximum Activate Count (MAC)  Auto: based on SPD setting
Token	=71	// Do NOT change this line
Offset	=1C6
Width	=01
Options	=*[FF]Auto	// Move "*" to the desired Option
         [00]Untested MAC
         [01]700 K
         [02]600 K
         [03]500 K
         [04]400 K
         [05]300 K
         [06]200 K
         [08]Unlimited MAC

Setup Question	= CAD Bus Timing User Controls
Help String	= Setup time on CAD bus signals to Auto or Manual
Token	=72	// Do NOT change this line
Offset	=7A
Width	=01
Options	=*[FF]Auto	// Move "*" to the desired Option
         [01]Manual

Setup Question	= AddrCmdSetup
Help String	= Setup time on CAD bus signals. Valid values 3Fh-0h.
Token	=73	// Do NOT change this line
Offset	=7B
Width	=01
Value	=0

Setup Question	= CsOdtSetup
Help String	= Setup time on CAD bus signals. Valid values 3Fh-0h.
Token	=74	// Do NOT change this line
Offset	=7C
Width	=01
Value	=0

Setup Question	= CkeSetup
Help String	= Setup time on CAD bus signals. Valid values 3Fh-0h.
Token	=75	// Do NOT change this line
Offset	=7D
Width	=01
Value	=0

Setup Question	= CAD Bus Drive Strength User Controls
Help String	= Drive Strength on CAD bus signals to Auto or Manual
Token	=76	// Do NOT change this line
Offset	=7E
Width	=01
Options	=*[FF]Auto	// Move "*" to the desired Option
         [01]Manual

Setup Question	= ClkDrvStren
Help String	= No help string
Token	=77	// Do NOT change this line
Offset	=7F
Width	=01
Options	=*[FF]Auto	// Move "*" to the desired Option
         [00]120.0 Ohm
         [01]60.0 Ohm
         [03]40.0 Ohm
         [07]30.0 Ohm
         [0F]24.0 Ohm
         [1F]20.0 Ohm

Setup Question	= AddrCmdDrvStren
Help String	= No help string
Token	=78	// Do NOT change this line
Offset	=80
Width	=01
Options	=*[FF]Auto	// Move "*" to the desired Option
         [00]120.0 Ohm
         [01]60.0 Ohm
         [03]40.0 Ohm
         [07]30.0 Ohm
         [0F]24.0 Ohm
         [1F]20.0 Ohm

Setup Question	= CsOdtDrvStren
Help String	= No help string
Token	=79	// Do NOT change this line
Offset	=81
Width	=01
Options	=*[FF]Auto	// Move "*" to the desired Option
         [00]120.0 Ohm
         [01]60.0 Ohm
         [03]40.0 Ohm
         [07]30.0 Ohm
         [0F]24.0 Ohm
         [1F]20.0 Ohm

Setup Question	= CkeDrvStren
Help String	= No help string
Token	=7A	// Do NOT change this line
Offset	=82
Width	=01
Options	=*[FF]Auto	// Move "*" to the desired Option
         [00]120.0 Ohm
         [01]60.0 Ohm
         [03]40.0 Ohm
         [07]30.0 Ohm
         [0F]24.0 Ohm
         [1F]20.0 Ohm

Setup Question	= Data Bus Configuration User Controls
Help String	= Specify the mode for drive strength to Auto or Manual
Token	=7B	// Do NOT change this line
Offset	=83
Width	=01
Options	=*[FF]Auto	// Move "*" to the desired Option
         [01]Manual

Setup Question	= RttNom
Help String	= No help string
Token	=7C	// Do NOT change this line
Offset	=84
Width	=01
Options	=[00]Rtt_Nom Disable	// Move "*" to the desired Option
         [01]RZQ/4
         [02]RZQ/2
         [03]RZQ/6
         [04]RZQ/1
         [05]RZQ/5
         [06]RZQ/3
         [07]RZQ/7
         *[FF]Auto

Setup Question	= RttWr
Help String	= No help string
Token	=7D	// Do NOT change this line
Offset	=85
Width	=01
Options	=[00]Dynamic ODT Off	// Move "*" to the desired Option
         [01]RZQ/2
         [02]RZQ/1
         [03]Hi-Z
         [04]RZQ/3
         *[FF]Auto

Setup Question	= RttPark
Help String	= No help string
Token	=7E	// Do NOT change this line
Offset	=86
Width	=01
Options	=[00]Rtt_PARK Disable	// Move "*" to the desired Option
         [01]RZQ/4
         [02]RZQ/2
         [03]RZQ/6
         [04]RZQ/1
         [05]RZQ/5
         [06]RZQ/3
         [07]RZQ/7
         *[FF]Auto

Setup Question	= Data Poisoning
Help String	= No help string
Token	=7F	// Do NOT change this line
Offset	=87
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         [01]Enabled
         *[FF]Auto

Setup Question	= DRAM Post Package Repair
Help String	= Enable or Disable DRAM  Post Package Repair.
Token	=80	// Do NOT change this line
Offset	=88
Width	=01
Options	=[01]Enable	// Move "*" to the desired Option
         *[00]Disable

Setup Question	= RCD Parity
Help String	= No help string
Token	=81	// Do NOT change this line
Offset	=89
Width	=01
Options	=[FF]Auto	// Move "*" to the desired Option
         *[00]Disabled
         [01]Enabled

Setup Question	= DRAM Address Command Parity Retry
Help String	= UMC_CH::RecCtrl[RecEn][0] and UMC_CH::RecCtrl[MaxParRply]
Token	=82	// Do NOT change this line
Offset	=8A
Width	=01
Options	=[FF]Auto	// Move "*" to the desired Option
         *[00]Disabled
         [01]Enabled

Setup Question	= Max Parity Error Replay
Help String	= Value in hex, 1, 2 or 3 is invalid
Token	=83	// Do NOT change this line
Offset	=8B
Width	=01
Value	=8

Setup Question	= Write CRC Enable
Help String	= No help string
Token	=84	// Do NOT change this line
Offset	=8C
Width	=01
Options	=[FF]Auto	// Move "*" to the desired Option
         *[00]Disabled
         [01]Enabled

Setup Question	= DRAM Write CRC Enable and Retry Limit
Help String	= UMC_CH::RecCtrl[RecEn][1] and UMC_CH::RecCtrl[MaxCrcRply]
Token	=85	// Do NOT change this line
Offset	=8D
Width	=01
Options	=[FF]Auto	// Move "*" to the desired Option
         *[00]Disabled
         [01]Enabled

Setup Question	= Max Write CRC Error Replay
Help String	= Value in hex, 1, 2 or 3 is invalid
Token	=86	// Do NOT change this line
Offset	=8E
Width	=01
Value	=8

Setup Question	= Disable Memory Error Injection
Help String	= True: UMC::CH::MiscCfg[DisErrInj]=1
Token	=87	// Do NOT change this line
Offset	=8F
Width	=01
Options	=[00]False	// Move "*" to the desired Option
         *[01]True

Setup Question	= DRAM ECC Symbol Size
Help String	= DRAM ECC Symbol Size (x4/x8) - UMC_CH::EccCtrl[EccSymbolSize]
Token	=89	// Do NOT change this line
Offset	=90
Width	=01
Options	=[00]x4	// Move "*" to the desired Option
         [01]x8
         *[FF]Auto

Setup Question	= DRAM ECC Enable
Help String	= Use this option to enable / disable DRAM ECC. Auto will set ECC to enable.
Token	=8A	// Do NOT change this line
Offset	=91
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         [01]Enabled
         *[FF]Auto

Setup Question	= DRAM UECC Retry
Help String	= Use this option to enable / disable DRAM UECC Retry.
Token	=8B	// Do NOT change this line
Offset	=92
Width	=01
Options	=[01]Enabled	// Move "*" to the desired Option
         *[00]Disabled

Setup Question	= TSME
Help String	= No help string
Token	=7024	// Do NOT change this line
Offset	=93
Width	=01
Options	=[FF]Auto	// Move "*" to the desired Option
         *[01]Enabled
         [00]Disabled

Setup Question	= Data Scramble
Help String	= Data scrambling: DataScrambleEn
Token	=7025	// Do NOT change this line
Offset	=94
Width	=01
Options	=*[01]Enabled	// Move "*" to the desired Option
         [00]Disabled
         [FF]Auto

Setup Question	= Chipselect Interleaving
Help String	= Interleave memory blocks across the DRAM chip selects for node 0.
Token	=8C	// Do NOT change this line
Offset	=95
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         *[FF]Auto

Setup Question	= BankGroupSwap
Help String	= No help string
Token	=8D	// Do NOT change this line
Offset	=96
Width	=01
Options	=*[FF]Auto	// Move "*" to the desired Option
         [00]Disabled
         [01]CPU Mode
         [02]APU Mode
         [03]ALT Mode

Setup Question	= Address Hash Bank
Help String	= Enable or disable bank address hashing
Token	=8E	// Do NOT change this line
Offset	=97
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         [01]Enabled
         *[FF]Auto

Setup Question	= Address Hash CS
Help String	= Enable or disable CS address hashing
Token	=8F	// Do NOT change this line
Offset	=98
Width	=01
Options	=*[FF]Auto	// Move "*" to the desired Option
         [01]Enabled
         [00]Disabled

Setup Question	= Address Hash Rm
Help String	= Enable or disable RM address hashing
Token	=90	// Do NOT change this line
Offset	=99
Width	=01
Options	=*[FF]Auto	// Move "*" to the desired Option
         [01]Enabled
         [00]Disabled

Setup Question	= SPD Read Optimization
Help String	= Enable or disable SPD Read Optimization, Enabled - SPD reads are skipped for Reserved fields and most of upper 256 Bytes, Disabled - read all 512 SPD Bytes
Token	=91	// Do NOT change this line
Offset	=9A
Width	=01
Options	=[FF]Auto	// Move "*" to the desired Option
         *[01]Enabled
         [00]Disabled

Setup Question	= DFE Read Training
Help String	= Perform 2D Read Training with DFE on.
Token	=93	// Do NOT change this line
Offset	=137
Width	=01
Options	=*[FF]Auto	// Move "*" to the desired Option
         [01]Enable
         [00]Disable

Setup Question	= FFE Write Training
Help String	= Perform 2D Write Training with FFE on.
Token	=94	// Do NOT change this line
Offset	=138
Width	=01
Options	=*[FF]Auto	// Move "*" to the desired Option
         [01]Enable
         [00]Disable

Setup Question	= MBIST Enable
Help String	= Enable or disable Memory MBIST
Token	=95	// Do NOT change this line
Offset	=9B
Width	=01
Options	=*[00]Disabled	// Move "*" to the desired Option
         [01]Enabled

Setup Question	= MBIST Test Mode
Help String	= Select MBIST Test Mode -Interface Mode (Tests Single and Multiple CS transactions and Basic Connectivity) or Data Eye Mode (Measures Voltage vs. Timing)
Token	=96	// Do NOT change this line
Offset	=9C
Width	=01
Options	=*[01]Data Eye Mode	// Move "*" to the desired Option

Setup Question	= MBIST Aggressors
Help String	= Enable or disable MBIST Aggressor test
Token	=97	// Do NOT change this line
Offset	=9D
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         [01]Enabled
         *[FF]Auto

Setup Question	= MBIST Per Bit Slave Die Reporting
Help String	= Reports 2D Data Eye Results in ABL Log for each DQ, Chipselect, and Channel
Token	=98	// Do NOT change this line
Offset	=9E
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         [01]Enabled
         *[FF]Auto

Setup Question	= Pattern Select
Help String	= No help string
Token	=9A	// Do NOT change this line
Offset	=9F
Width	=01
Options	=*[00]PRBS	// Move "*" to the desired Option
         [01]SSO
         [02]Both

Setup Question	= Pattern Length
Help String	= This token helps to determine the pattern length. The possible options are N=3...12
Token	=9B	// Do NOT change this line
Offset	=A0
Width	=01
Value	=6

Setup Question	= Aggressor Channel
Help String	= This helps read the aggressors channels. If it is enabled, you can read from one or more than one aggressor channel. The default is set to disabled.
Token	=9C	// Do NOT change this line
Offset	=A1
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         *[01]1 Aggressor Channel
         [03]3 Aggressor Channels
         [07]7 Aggressor Channels

Setup Question	= Aggressor Static Lane Control
Help String	= This option, if enabled, will control the Aggressor Static Lane Controls.
Token	=9D	// Do NOT change this line
Offset	=A2
Width	=01
Options	=*[00]Disabled	// Move "*" to the desired Option
         [01]Enabled

Setup Question	= Aggressor Static Lane Select Upper 32 bits
Help String	= Static Lane Select for Upper 32 bits. The bit mask represents the bits to be read
Token	=9E	// Do NOT change this line
Offset	=A3
Width	=04
Value	=0

Setup Question	= Aggressor Static Lane Select Lower 32 Bits
Help String	= Static Lane Select for Lower 32 bits. The bit mask represents the bits to be read
Token	=9F	// Do NOT change this line
Offset	=A7
Width	=04
Value	=0

Setup Question	= Aggressor Static Lane Select ECC
Help String	= Static Lane Select for ECC Lanes. The bit mask represents the bits to be read
Token	=A0	// Do NOT change this line
Offset	=AB
Width	=01
Value	=0

Setup Question	= Aggressor Static Lane Value
Help String	= TBD
Token	=A1	// Do NOT change this line
Offset	=AC
Width	=01
Value	=0

Setup Question	= Target Static Lane Control
Help String	= No help string
Token	=A2	// Do NOT change this line
Offset	=AD
Width	=01
Options	=*[00]Disabled	// Move "*" to the desired Option
         [01]Enabled

Setup Question	= Target Static Lane Select Upper 32 bit
Help String	= Static Lane Select for Upper 32 bit. The bit mask represents the bits to be read
Token	=A3	// Do NOT change this line
Offset	=AE
Width	=04
Value	=0

Setup Question	= Target Static Lane Select Lower 32 Bits
Help String	= Static Lane Select for Lower 32 bit. The bit mask represents the bits to be read
Token	=A4	// Do NOT change this line
Offset	=B2
Width	=04
Value	=0

Setup Question	= Target Static Lane Select ECC
Help String	= TBD
Token	=A5	// Do NOT change this line
Offset	=B6
Width	=01
Value	=0

Setup Question	= Target Static Lane Value
Help String	= No help string
Token	=A6	// Do NOT change this line
Offset	=B7
Width	=01
Value	=0

Setup Question	= Data Eye Type
Help String	= This options determines which results are expected to be captured for Data Eye. Supported options are 1D Voltage Sweep, 1D Timing Sweep, 2D Full Data Eye and Worst Case Margin only.
Token	=A7	// Do NOT change this line
Offset	=B8
Width	=01
Options	=[00]1D Voltage Sweep	// Move "*" to the desired Option
         [01]1D Timing Sweep
         [02]2D Full Data Eye
         *[03]Worst Case Margin Only

Setup Question	= Worst Case Margin Granularity
Help String	= No help string
Token	=A8	// Do NOT change this line
Offset	=B9
Width	=01
Options	=*[00]Per Chip Select	// Move "*" to the desired Option
         [01]Per Nibble

Setup Question	= Read Voltage Sweep Step Size
Help String	= This option determines the step size for Read Data Eye voltage sweep, Supported options are 1,2 and 4
Token	=A9	// Do NOT change this line
Offset	=BA
Width	=01
Options	=[01]1	// Move "*" to the desired Option
         [02]2
         *[04]4

Setup Question	= Read Timing Sweep Step Size
Help String	= This options supports step size for Read Data Eye. Supported options are 1, 2 and 4
Token	=AA	// Do NOT change this line
Offset	=BB
Width	=01
Options	=*[01]1	// Move "*" to the desired Option
         [02]2
         [04]4

Setup Question	= Write Voltage Sweep Step Size
Help String	= This option determines the step size for write Data Eye voltage sweep, Supported options are 1,2 and 4
Token	=AB	// Do NOT change this line
Offset	=BC
Width	=01
Options	=[01]1	// Move "*" to the desired Option
         *[02]2
         [04]4

Setup Question	= Write Timing Sweep Step Size
Help String	= This options supports step size for write Data Eye. Supported options are 1, 2 and 4
Token	=AC	// Do NOT change this line
Offset	=BD
Width	=01
Options	=*[01]1	// Move "*" to the desired Option
         [02]2
         [04]4

Setup Question	= IOMMU
Help String	= Enable/Disable IOMMU
Token	=AD	// Do NOT change this line
Offset	=C9
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         [01]Enabled
         *[0F]Auto

Setup Question	= DMA Protection
Help String	= Enable DMA remap support in IVRS IVinfo Field.
Token	=7028	// Do NOT change this line
Offset	=1C9
Width	=01
Options	=*[0F]Auto	// Move "*" to the desired Option
         [01]Enabled
         [00]Disabled

Setup Question	= DMAr Support
Help String	= Enable DMAr system protection during POST.
Token	=7029	// Do NOT change this line
Offset	=14A
Width	=01
Options	=*[0F]Auto	// Move "*" to the desired Option
         [01]Enabled
         [00]Disabled

Setup Question	= PCIe ARI Support
Help String	= Enable/Disable ARI
Token	=AE	// Do NOT change this line
Offset	=14D
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         [01]Enabled
         *[0F]Auto

Setup Question	= PCIe ARI Enumeration
Help String	= ARI Forwarding Enable for each downstream port
Token	=AF	// Do NOT change this line
Offset	=1A7
Width	=01
Options	=[00]Disable	// Move "*" to the desired Option
         [01]Enable
         *[0F]Auto

Setup Question	= PSPP Policy
Help String	= No help string
Token	=B0	// Do NOT change this line
Offset	=CA
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         [02]Balanced
         *[0F]Auto

Setup Question	= iGPU Configuration
Help String	= UMA Mode
Token	=B5	// Do NOT change this line
Offset	=C1
Width	=01
Options	=[0F]Auto	// Move "*" to the desired Option
         [00]iGPU Disabled
         [01]UMA_SPECIFIED
         [02]UMA_AUTO
         *[03]UMA_GAME_OPTIMIZED

Setup Question	= UMA Frame buffer Size
Help String	= Set UMA FB size
Token	=B6	// Do NOT change this line
Offset	=C4
Width	=04
Options	=*[FFFFFFFF]Auto	// Move "*" to the desired Option
         [40]64M
         [80]128M
         [100]256M
         [180]384M
         [200]512M
         [50]80M
         [60]96M
         [300]768M
         [400]1G
         [800]2G
         [C00]3G
         [1000]4G
         [2000]8G
         [4000]16G

Setup Question	= GPU Host Translation Cache
Help String	= Option to disable GPU Host Translation Cache
Token	=B7	// Do NOT change this line
Offset	=13D
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         [01]Enabled
         *[0F]Auto

Setup Question	= NB Azalia
Help String	= Enable Integrate HD Audio controller
Token	=B8	// Do NOT change this line
Offset	=C8
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         [01]Enabled
         *[0F]Auto

Setup Question	= Audio IOs
Help String	= Audio IOs control
Token	=B9	// Do NOT change this line
Offset	=BF
Width	=01
Options	=*[0F]Auto	// Move "*" to the desired Option
         [00]Azalia
         [03]SoundWire
         [02]Azalia  and  SoundWire
         [04]I2STDM and I2SBT
         [05]Azalia and I2SBT
         [06]SoundWire and I2SBT
         [01]Azalia mHDA

Setup Question	= PDM Mic Selection
Help String	= PDM Mic Selection
Token	=BA	// Do NOT change this line
Offset	=142
Width	=01
Options	=*[0F]Auto	// Move "*" to the desired Option
         [00]Use 4 Channel
         [01]Use 6 Channel

Setup Question	= FCLK Frequency
Help String	= Specifies the FCLK frequency.
Token	=BD	// Do NOT change this line
Offset	=112
Width	=01
Options	=*[FF]Auto	// Move "*" to the desired Option
         [00]667MHz
         [01]800MHz
         [02]933MHz
         [03]1067MHz
         [04]1200MHz
         [05]1333MHz
         [06]1367MHz
         [07]1400MHz
         [08]1433MHz
         [09]1467MHz
         [0A]1500MHz
         [0B]1533MHz
         [0C]1567MHz
         [0D]1600MHz
         [0E]1633MHz
         [0F]1667MHz
         [10]1700MHz
         [11]1733MHz
         [12]1767MHz
         [13]1800MHz
         [14]1833MHz
         [15]1867MHz
         [16]1900MHz
         [17]1933MHz
         [18]1967MHz
         [19]2000MHz
         [1A]2033MHz
         [1B]2067MHz
         [1C]2100MHz
         [1D]2133MHZ
         [1E]2167MHZ
         [1F]2200MHZ
         [20]2233MHZ
         [21]2267MHZ
         [22]2300MHZ
         [23]2333MHZ
         [24]2367MHZ
         [25]2400MHZ
         [26]2433MHZ
         [27]2467MHZ
         [28]2500MHZ
         [29]2550MHZ
         [2A]2600MHZ
         [2B]2650MHZ
         [2C]2700MHZ
         [2D]2750MHZ
         [2E]2800MHZ
         [2F]2850MHZ
         [30]2900MHZ
         [31]2950MHZ
         [32]3000MHZ
         [33]3050MHZ
         [34]3100MHZ
         [35]3150MHZ
         [36]3200MHZ
         [37]3250MHZ
         [38]3300MHZ
         [39]3350MHZ
         [3A]3400MHZ
         [3B]3450MHZ
         [3C]3500MHZ
         [3D]3550MHZ
         [3E]3600MHZ
         [3F]3650MHZ
         [40]3700MHZ
         [41]3750MHZ
         [42]3800MHZ
         [43]3850MHZ
         [44]3900MHZ
         [45]3950MHZ
         [46]4000MHZ

Setup Question	= SOC OVERCLOCK VID
Help String	= Specifies the Voltage ID (VID) value for VDDR_SOC to support overclocking.  NOTE:  This is a VID value in hex and not a voltage level and applied if DDR speed is > 2933.   Voltage(V)=1.55V-Hex2Dec(VID)*0.00625V
Token	=BE	// Do NOT change this line
Offset	=113
Width	=01
Value	=0

Setup Question	= UCLK DIV1 MODE
Help String	= If UclkDiv1Mode==1, UCLK==MEMCLK  if UclkDiv1Mode==0, UCLK==MEMCLK/2
Token	=BF	// Do NOT change this line
Offset	=114
Width	=01
Options	=*[FF]Auto	// Move "*" to the desired Option
         [01]UCLK==MEMCLK
         [00]UCLK==MEMCLK/2

Setup Question	= Precision Boost Overdrive
Help String	= Precision Boost Overdrive:    Disabled: stock board values for standard IRM    Enabled: Loads board limits for EDC, TDC and PPT.    Manual: manual setting of PPT, TDC and EDC
Token	=C0	// Do NOT change this line
Offset	=100
Width	=01
Options	=*[0F]Auto	// Move "*" to the desired Option
         [00]Disable
         [01]Enable
         [02]Manual

Setup Question	= PPT Limit
Help String	= PPT Limit [W], Board Socket Power capability, adjustable up to motherboard programed PPT limit.
Token	=C1	// Do NOT change this line
Offset	=106
Width	=04
Value	=<0>

Setup Question	= TDC Limit
Help String	= TDC Limit [A], Board thermally constrained current delivery capability, adjustable up to motherboard programed board TDC limit.
Token	=C2	// Do NOT change this line
Offset	=10A
Width	=04
Value	=<0>

Setup Question	= EDC Limit
Help String	= EDC Limit [A], Board electrically constrained current delivery capability, adjustable up to motherboard programed board EDC limit.
Token	=C3	// Do NOT change this line
Offset	=10E
Width	=04
Value	=<0>

Setup Question	= Precision Boost Overdrive Scalar
Help String	= Disabled:Part runs with a scalar of 1X, i.e. normal operation.    Manual = Part runs with a scalar of customized Value.
Token	=C4	// Do NOT change this line
Offset	=101
Width	=01
Options	=*[0F]Auto	// Move "*" to the desired Option
         [00]Disabled
         [01]Manual

Setup Question	= customized Precision Boost Overdrive Scalar
Help String	= Precision Boost Overdrive increases the maximum boost voltage used (runs above parts specified maximum) and the amount of time spent at that voltage. The larger the value entered the larger the boost voltage used and the longer that voltage will be maintained.
Token	=C5	// Do NOT change this line
Offset	=102
Width	=04
Options	=[64]1X	// Move "*" to the desired Option
         *[C8]2X
         [12C]3X
         [190]4X
         [1F4]5X
         [258]6X
         [2BC]7X
         [320]8X
         [384]9X
         [3E8]10X

Setup Question	= System Configuration
Help String	= Warning: Select System Configuration may cause the system to hang, as some System Configuration may not be supported by your OPN.
Token	=7034	// Do NOT change this line
Offset	=BE
Width	=01
Options	=[01]10W POR Configuration - 1 Commercial/Consumer	// Move "*" to the desired Option
         [02]15W POR Configuration - 2 Commercial/Consumer
         [03]25W POR Configuration - 3 Commercial/Consumer
         [04]35W POR Configuration - 4 Consumer
         [05]45W POR Configuration - 5 Consumer
         [06]54W POR Configuration - 6 Consumer
         *[0F]Auto

Setup Question	= System Configuration AM4
Help String	= Warning: Select System Configuration may cause the system to hang, as some System Configuration may not be supported by your OPN.
Token	=7035	// Do NOT change this line
Offset	=1A6
Width	=01
Options	=[01]35W COMMERCIAL and CONSUMER - SYSTEM CONFIG 1	// Move "*" to the desired Option
         [02]45W COMMERCIAL and CONSUMER - SYSTEM CONFIG 2
         [03]65W COMMERCIAL - SYSTEM CONFIG 3
         [06]65W CONSUMER - SYSTEM CONFIG 6
         *[0F]Auto

Setup Question	= Fan Control
Help String	= Auto = Use the default fan controller settings  Manual = User can set customized fan controller settings
Token	=CB	// Do NOT change this line
Offset	=CB
Width	=01
Options	=[01]Manual	// Move "*" to the desired Option
         *[00]Auto

Setup Question	= Force PWM Control
Help String	= Unforce = Do not force the fan PWM  Force = Force the fan PWM to the use specified value
Token	=CC	// Do NOT change this line
Offset	=CC
Width	=01
Options	=[01]Force	// Move "*" to the desired Option
         *[00]Unforce

Setup Question	= Force PWM
Help String	= Specify the PWM to force the fan to [0-100]
Token	=CD	// Do NOT change this line
Offset	=CD
Width	=01
Value	=<0>

Setup Question	= Fan Table Control
Help String	= Auto = Use the default fan table  Manual = User can set customized fan table
Token	=CE	// Do NOT change this line
Offset	=CE
Width	=01
Options	=[01]Manual	// Move "*" to the desired Option
         *[00]Auto

Setup Question	= Low Temperature
Help String	= Low Temperature ['C]
Token	=CF	// Do NOT change this line
Offset	=CF
Width	=01
Value	=<0>

Setup Question	= Medium Temperature
Help String	= Medium Temperature ['C]
Token	=D0	// Do NOT change this line
Offset	=D0
Width	=01
Value	=<0>

Setup Question	= High Temperature
Help String	= High Temperature ['C]
Token	=D1	// Do NOT change this line
Offset	=D1
Width	=01
Value	=<0>

Setup Question	= Critical Temperature
Help String	= Critical Temperature ['C]
Token	=D2	// Do NOT change this line
Offset	=D2
Width	=01
Value	=<0>

Setup Question	= Low Pwm
Help String	= Low Pwm [0-100]
Token	=D3	// Do NOT change this line
Offset	=D3
Width	=01
Value	=<0>

Setup Question	= Medium Pwm
Help String	= Medium Pwm [0-100]
Token	=D4	// Do NOT change this line
Offset	=D4
Width	=01
Value	=<0>

Setup Question	= High Pwm
Help String	= High Pwm [0-100]
Token	=D5	// Do NOT change this line
Offset	=D5
Width	=01
Value	=<0>

Setup Question	= Temperature Hysteresis
Help String	= Temperature Hysteresis ['C]
Token	=D6	// Do NOT change this line
Offset	=D6
Width	=01
Value	=<0>

Setup Question	= Pwm Frequency
Help String	= 0 = 25kHz  1 = 100Hz
Token	=D7	// Do NOT change this line
Offset	=D7
Width	=01
Options	=[01]100Hz	// Move "*" to the desired Option
         *[00]25kHz

Setup Question	= Fan Polarity
Help String	= 0 = negative  1 = positive
Token	=D8	// Do NOT change this line
Offset	=D8
Width	=01
Options	=*[00]Negative	// Move "*" to the desired Option
         [01]Positive

Setup Question	= STT Control
Help String	= Auto = Use the default STT controller settings  Manual = User can set customized STT controller settings
Token	=D9	// Do NOT change this line
Offset	=119
Width	=01
Options	=*[0F]Auto	// Move "*" to the desired Option
         [01]Manual

Setup Question	= System Temperature Tracking
Help String	= System Temperature Tracking [0 = disabled; 1 = enabled]
Token	=DA	// Do NOT change this line
Offset	=C0
Width	=01
Options	=*[0F]Auto	// Move "*" to the desired Option
         [00]Disable
         [01]Enable

Setup Question	= STT_MinLimit
Help String	= Specifies the minimum sustained power that the APU power is allowed to reduce to in mWatts.
Token	=DB	// Do NOT change this line
Offset	=140
Width	=02
Value	=<0>

Setup Question	= STT_PCB_SENSOR_COUNT
Help String	= No help string
Token	=7037	// Do NOT change this line
Offset	=11A
Width	=01
Options	=*[0F]Auto	// Move "*" to the desired Option
         [02]APU Only
         [03]APU+HS2

Setup Question	= STT_M1
Help String	= No help string
Token	=DC	// Do NOT change this line
Offset	=11B
Width	=02
Value	=0

Setup Question	= STT_M2
Help String	= No help string
Token	=DD	// Do NOT change this line
Offset	=11D
Width	=02
Value	=0

Setup Question	= STT_M3
Help String	= No help string
Token	=DE	// Do NOT change this line
Offset	=11F
Width	=02
Value	=0

Setup Question	= STT_M4
Help String	= No help string
Token	=DF	// Do NOT change this line
Offset	=121
Width	=02
Value	=0

Setup Question	= STT_M5
Help String	= No help string
Token	=E0	// Do NOT change this line
Offset	=123
Width	=02
Value	=0

Setup Question	= STT_M6
Help String	= No help string
Token	=E1	// Do NOT change this line
Offset	=125
Width	=02
Value	=0

Setup Question	= STT_C_APU
Help String	= No help string
Token	=E2	// Do NOT change this line
Offset	=127
Width	=02
Value	=0

Setup Question	= STT_C_GPU
Help String	= No help string
Token	=E3	// Do NOT change this line
Offset	=129
Width	=02
Value	=0

Setup Question	= STT_C_HS2
Help String	= No help string
Token	=E4	// Do NOT change this line
Offset	=1B0
Width	=02
Value	=0

Setup Question	= STT_ALPHA_APU
Help String	= No help string
Token	=E5	// Do NOT change this line
Offset	=12B
Width	=02
Value	=0

Setup Question	= STT_ALPHA_GPU
Help String	= No help string
Token	=E6	// Do NOT change this line
Offset	=12D
Width	=02
Value	=0

Setup Question	= STT_ALPHA_HS2
Help String	= No help string
Token	=E7	// Do NOT change this line
Offset	=1B2
Width	=02
Value	=0

Setup Question	= STT_SKIN_TEMPERATURE_LIMIT_APU
Help String	= No help string
Token	=E8	// Do NOT change this line
Offset	=12F
Width	=02
Value	=0

Setup Question	= STT_SKIN_TEMPERATURE_LIMIT_GPU
Help String	= No help string
Token	=E9	// Do NOT change this line
Offset	=131
Width	=02
Value	=0

Setup Question	= STT_SKIN_TEMPERATURE_LIMIT_HS2
Help String	= No help string
Token	=EA	// Do NOT change this line
Offset	=1B4
Width	=02
Value	=0

Setup Question	= STT_ERROR_COEFF
Help String	= No help string
Token	=EB	// Do NOT change this line
Offset	=133
Width	=02
Value	=0

Setup Question	= STT_ERROR_RATE_COEFF_Copy
Help String	= No help string
Token	=EC	// Do NOT change this line
Offset	=135
Width	=02
Value	=0

Setup Question	= STAPM Control
Help String	= No help string
Token	=ED	// Do NOT change this line
Offset	=F2
Width	=01
Options	=*[00]Auto	// Move "*" to the desired Option
         [01]Manual

Setup Question	= STAPM Boost
Help String	= STAPM Boost Enable [1 = boost disabled; 2 = boost enabled]
Token	=EE	// Do NOT change this line
Offset	=F3
Width	=01
Options	=*[0F]Auto	// Move "*" to the desired Option
         [00]Disable
         [01]Enable

Setup Question	= Tskin Time Constant
Help String	= Tskin time constant [seconds]
Token	=EF	// Do NOT change this line
Offset	=F4
Width	=04
Value	=<0>

Setup Question	= SmartShift Control
Help String	= No help string
Token	=F0	// Do NOT change this line
Offset	=F8
Width	=01
Options	=*[0F]Auto	// Move "*" to the desired Option
         [01]Manual

Setup Question	= SmartShift Enable
Help String	= A+A Support Enable
Token	=F1	// Do NOT change this line
Offset	=F9
Width	=01
Options	=*[0F]Auto	// Move "*" to the desired Option
         [00]Disable
         [01]Enable

Setup Question	= APU Only sPPT Limit
Help String	= APU Only sPPT Limit in mW
Token	=F2	// Do NOT change this line
Offset	=139
Width	=04
Value	=<0>

Setup Question	= Sustained PowerLimit
Help String	= PcdMsgSetSustainedPowerLimit
Token	=F3	// Do NOT change this line
Offset	=182
Width	=04
Value	=<0>

Setup Question	= Fast PPT Limit
Help String	= PcdMsgSetFastPPTLimit
Token	=F4	// Do NOT change this line
Offset	=186
Width	=04
Value	=<0>

Setup Question	= Slow PPT Limit
Help String	= PcdMsgSetSlowPPTLimit
Token	=F5	// Do NOT change this line
Offset	=18A
Width	=04
Value	=<0>

Setup Question	= CPPC CTRL
Help String	= CPPC Control :  Enable- Override,   Disabled: - Set default.
Token	=F6	// Do NOT change this line
Offset	=145
Width	=01
Options	=*[0F]Auto	// Move "*" to the desired Option
         [01]Enabled
         [00]Disabled

Setup Question	= Perf Limit Max Range
Help String	= Range of CppcPerfLimitMax: 0 - 255
Token	=F7	// Do NOT change this line
Offset	=146
Width	=01
Value	=FF

Setup Question	= Perf Limit Min Range
Help String	= Range of CppcPerfLimitMin: 0 - 255
Token	=F8	// Do NOT change this line
Offset	=147
Width	=01
Value	=0

Setup Question	= EPP Max Range
Help String	= Range of EPP Max: 0 - 255
Token	=F9	// Do NOT change this line
Offset	=148
Width	=01
Value	=FF

Setup Question	= EPP Min Range
Help String	= Range of EPP Min: 0 - 255
Token	=FA	// Do NOT change this line
Offset	=149
Width	=01
Value	=0

Setup Question	= CPPC Preferred Cores
Help String	= Enabled = CPPC highest capability register of each thread will have a different value to express the AMD recommended scheduling order to OS. CPPC must be enabled for this parameter to have effect.   Disabled = Does not declare AMD preferred scheduling order to OS.
Token	=7038	// Do NOT change this line
Offset	=1AB
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         [01]Enabled
         *[0F]Auto

Setup Question	= SATA Controller
Help String	= Disable or enable OnChip SATA controller
Token	=7042	// Do NOT change this line
Offset	=D9
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         [01]Enabled
         *[0F]Auto

Setup Question	= SATA Auto Shutdown
Help String	= Disable SATA controller if there is no port connection.
Token	=7043	// Do NOT change this line
Offset	=144
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         [01]Enabled
         *[0F]Auto

Setup Question	= SATA Mode
Help String	= Select OnChip SATA Type. Don't select RAID for Raven FP5 platform. Raven FP5 doesn't support RAID.
Token	=7044	// Do NOT change this line
Offset	=DA
Width	=01
Options	=[02]AHCI	// Move "*" to the desired Option
         [05]AHCI as ID 0x7904
         *[0F]Auto
         [01]RAID

Setup Question	= Sata RAS Support
Help String	= Disable or enable Sata RAS Support
Token	=104	// Do NOT change this line
Offset	=DB
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         [01]Enabled
         *[0F]Auto

Setup Question	= Sata Disabled AHCI Prefetch Function
Help String	= Disable or enable Sata Disabled AHCI Prefetch Function
Token	=105	// Do NOT change this line
Offset	=DC
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         [01]Enabled
         *[0F]Auto

Setup Question	= Aggresive SATA Device Sleep Port 0
Help String	= No help string
Token	=106	// Do NOT change this line
Offset	=DD
Width	=01
Options	=[00]Disable	// Move "*" to the desired Option
         [01]Enable
         *[0F]Auto

Setup Question	= DevSleep0 Port Number
Help String	= SATA port number map to DEVSLP pad 0: 0-7: SATA 0; 8-15: SATA 1
Token	=107	// Do NOT change this line
Offset	=180
Width	=01
Value	=0

Setup Question	= Aggresive SATA Device Sleep Port 1
Help String	= No help string
Token	=108	// Do NOT change this line
Offset	=DE
Width	=01
Options	=[00]Disable	// Move "*" to the desired Option
         [01]Enable
         *[0F]Auto

Setup Question	= DevSleep1 Port Number
Help String	= SATA port number map to DEVSLP pad 1: 0-7: SATA 0 ports; 8-15: SATA 1 ports
Token	=109	// Do NOT change this line
Offset	=181
Width	=01
Value	=0

Setup Question	= SATA0 port0
Help String	= Enable/Disable port 0 of SATA controller 0
Token	=10C	// Do NOT change this line
Offset	=1AC
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         [01]Enabled
         *[0F]Auto

Setup Question	= SATA0 port1
Help String	= Enable/Disable port 1 of SATA controller 0
Token	=10D	// Do NOT change this line
Offset	=1AD
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         [01]Enabled
         *[0F]Auto

Setup Question	= SATA1 port0
Help String	= Enable/Disable port 0 of SATA controller 1
Token	=10E	// Do NOT change this line
Offset	=1AE
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         [01]Enabled
         *[0F]Auto

Setup Question	= SATA1 port1
Help String	= Enable/Disable port 1 of SATA controller 1
Token	=10F	// Do NOT change this line
Offset	=1AF
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         [01]Enabled
         *[0F]Auto

Setup Question	= XHCI0 controller enable
Help String	= Enable or disable USB3 controller.
Token	=110	// Do NOT change this line
Offset	=DF
Width	=01
Options	=[01]Enabled	// Move "*" to the desired Option
         [00]Disabled
         *[0F]Auto

Setup Question	= XHCI1 controller enable
Help String	= Enable or disable USB3 controller.
Token	=111	// Do NOT change this line
Offset	=E0
Width	=01
Options	=[01]Enabled	// Move "*" to the desired Option
         [00]Disabled
         *[0F]Auto

Setup Question	= USB Port0 Disable
Help String	= No help string
Token	=112	// Do NOT change this line
Offset	=1AA
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         [01]Enabled
         *[0F]Auto

Setup Question	= XHCI0 2.0 Port 0
Help String	= Disable or Enable XHCI0 2.0 port 0
Token	=117	// Do NOT change this line
Offset	=1B6
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         [01]Enabled
         *[0F]Auto

Setup Question	= XHCI0 2.0 Port 1
Help String	= Disable or Enable XHCI0 2.0 port 1
Token	=118	// Do NOT change this line
Offset	=1B7
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         [01]Enabled
         *[0F]Auto

Setup Question	= XHCI0 2.0 Port 2
Help String	= Disable or Enable XHCI0 2.0 port 2
Token	=119	// Do NOT change this line
Offset	=1B8
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         [01]Enabled
         *[0F]Auto

Setup Question	= XHCI0 2.0 Port 3
Help String	= Disable or Enable XHCI0 2.0 port 3
Token	=11A	// Do NOT change this line
Offset	=1B9
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         [01]Enabled
         *[0F]Auto

Setup Question	= XHCI1 2.0 Port 0
Help String	= Disable or Enable XHCI1 2.0 port 0
Token	=11B	// Do NOT change this line
Offset	=1BA
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         [01]Enabled
         *[0F]Auto

Setup Question	= XHCI1 2.0 Port 1
Help String	= Disable or Enable XHCI1 2.0 port 1
Token	=11C	// Do NOT change this line
Offset	=1BB
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         [01]Enabled
         *[0F]Auto

Setup Question	= XHCI1 2.0 Port 2
Help String	= Disable or Enable XHCI1 2.0 port 2
Token	=11D	// Do NOT change this line
Offset	=1C0
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         [01]Enabled
         *[0F]Auto

Setup Question	= XHCI1 2.0 Port 3
Help String	= Disable or Enable XHCI1 2.0 port 3
Token	=11E	// Do NOT change this line
Offset	=1C1
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         [01]Enabled
         *[0F]Auto

Setup Question	= XHCI0 3.1 Port 0
Help String	= Disable or Enable XHCI0 3.1 port 0
Token	=11F	// Do NOT change this line
Offset	=1BC
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         [01]Enabled
         *[0F]Auto

Setup Question	= XHCI0 3.1 Port 1
Help String	= Disable or Enable XHCI0 3.1 port 1
Token	=120	// Do NOT change this line
Offset	=1BD
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         [01]Enabled
         *[0F]Auto

Setup Question	= XHCI1 3.1 Port 0
Help String	= Disable or Enable XHCI1 3.1 port 0
Token	=121	// Do NOT change this line
Offset	=1BE
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         [01]Enabled
         *[0F]Auto

Setup Question	= XHCI1 3.1 Port 1
Help String	= Disable or Enable XHCI1 3.1 port 1
Token	=122	// Do NOT change this line
Offset	=1BF
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         [01]Enabled
         *[0F]Auto

Setup Question	= Ac Loss Control
Help String	= Select Ac Loss Control Method
Token	=123	// Do NOT change this line
Offset	=E1
Width	=01
Options	=*[00]Always Off	// Move "*" to the desired Option
         [01]Always On

Setup Question	= I2C 0 Enable
Help String	= No help string
Token	=124	// Do NOT change this line
Offset	=E2
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         [01]Enabled
         *[0F]Auto

Setup Question	= I2C 1 Enable
Help String	= No help string
Token	=125	// Do NOT change this line
Offset	=E3
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         [01]Enabled
         *[0F]Auto

Setup Question	= I2C 2 Enable
Help String	= No help string
Token	=126	// Do NOT change this line
Offset	=E4
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         [01]Enabled
         *[0F]Auto

Setup Question	= I2C 3 Enable
Help String	= No help string
Token	=127	// Do NOT change this line
Offset	=E5
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         [01]Enabled
         *[0F]Auto

Setup Question	= Uart 0 Enable
Help String	= Uart 0 has no HW FC if Uart 2 is enabled
Token	=128	// Do NOT change this line
Offset	=E6
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         [01]Enabled
         *[0F]Auto

Setup Question	= Uart 0 Legacy Options
Help String	= No help string
Token	=129	// Do NOT change this line
Offset	=E7
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         [01]0x2E8
         [02]0x2F8
         [03]0x3E8
         [04]0x3F8
         *[0F]Auto

Setup Question	= Uart 1 Enable
Help String	= Uart 1 has no HW FC if Uart 3 is enabled
Token	=12A	// Do NOT change this line
Offset	=E8
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         [01]Enabled
         *[0F]Auto

Setup Question	= Uart 1 Legacy Options
Help String	= No help string
Token	=12B	// Do NOT change this line
Offset	=E9
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         [01]0x2E8
         [02]0x2F8
         [03]0x3E8
         [04]0x3F8
         *[0F]Auto

Setup Question	= Uart 2 Enable (no HW FC)
Help String	= No help string
Token	=12C	// Do NOT change this line
Offset	=EA
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         [01]Enabled
         *[0F]Auto

Setup Question	= Uart 2 Legacy Options
Help String	= No help string
Token	=12D	// Do NOT change this line
Offset	=EB
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         [01]0x2E8
         [02]0x2F8
         [03]0x3E8
         [04]0x3F8
         *[0F]Auto

Setup Question	= Uart 3 Enable (no HW FC)
Help String	= No help string
Token	=12E	// Do NOT change this line
Offset	=EC
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         [01]Enabled
         *[0F]Auto

Setup Question	= Uart 3 Legacy Options
Help String	= No help string
Token	=12F	// Do NOT change this line
Offset	=ED
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         [01]0x2E8
         [02]0x2F8
         [03]0x3E8
         [04]0x3F8
         *[0F]Auto

Setup Question	= ESPI Enable
Help String	= No help string
Token	=130	// Do NOT change this line
Offset	=EE
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         [01]Enabled
         *[0F]Auto

Setup Question	= XGBE0 enable
Help String	= Enable or disable Ethernet controller.
Token	=131	// Do NOT change this line
Offset	=EF
Width	=01
Options	=[01]Enabled	// Move "*" to the desired Option
         [00]Disabled
         *[0F]Auto

Setup Question	= XGBE1 enable
Help String	= Enable or disable Ethernet controller.
Token	=132	// Do NOT change this line
Offset	=F0
Width	=01
Options	=[01]Enabled	// Move "*" to the desired Option
         [00]Disabled
         *[0F]Auto

Setup Question	= LPC Clock Run control
Help String	= No help string
Token	=133	// Do NOT change this line
Offset	=F1
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         [01]Enabled
         *[0F]Auto

Setup Question	= HFP Enable
Help String	= No help string
Token	=134	// Do NOT change this line
Offset	=14B
Width	=01
Options	=[00]Disabled	// Move "*" to the desired Option
         [01]Eanble HFP on SPI_CS3_L
         *[0F]Auto

Setup Question	= PSP RPMC Switch
Help String	= Control RPMC usage.  Enable : Enable RMPC function  Disable : Disable RMPC function  Auto : Keep default behavior    This option is for test purpose only,  NOT FOR PRODUCTION!!!
Token	=135	// Do NOT change this line
Offset	=1D9
Width	=01
Options	=*[FF]Auto	// Move "*" to the desired Option
         [00]Disabled
         [01]Enabled

Setup Question	= ABL Console Out Control
Help String	= Enable : Enable ConsoleOut Function for ABL  Disable : Disable ConsoleOut Function for ABL  Auto : Keep default behavior
Token	=136	// Do NOT change this line
Offset	=143
Width	=01
Options	=*[02]Auto	// Move "*" to the desired Option
         [01]Enable
         [00]Disable

Setup Question	= ABL Console Out Boot Mode Select
Help String	= No help string
Token	=137	// Do NOT change this line
Offset	=14C
Width	=01
Options	=*[FF]ALL	// Move "*" to the desired Option
         [02]S3/S0i3 only
         [01]Normal boot only

Setup Question	= ABL PMU message Control
Help String	= To control the total number of PMU debug messages.  Several major controls are listed below:  1. Detailed debug messages (e.g. Eye delays)  2. Coarse debug messages (e.g. rank information)  3. Stage completion  4. Firmware completion messages only
Token	=138	// Do NOT change this line
Offset	=1A8
Width	=01
Options	=[03]Detailed debug message	// Move "*" to the desired Option
         [0A]Coarse debug message
         [C8]Stage completion
         [FE]Firmware completion message only
         *[FF]Auto

Setup Question	= System Language
Help String	= Choose the system default language
Token	=07	// Do NOT change this line
Offset	=00
Width	=02
Options	=*[00]en-US

Setup Question	= Setup Prompt Timeout
Help String	= Number of seconds to wait for setup activation key. 65535(0xFFFF) means indefinite waiting.
Token	=F2	// Do NOT change this line
Offset	=00
Width	=02
Value	=<10>